7/24/2019 Pages de 273702277 SingleRAN Co Transmission

1/1

Document Title Security Level

2011-03-29 HUAWEI Confidential Page32, Total34

Parameter ID

NE

MML

Description

LOCIP1 BSC6900 ADD SCTPLNK(Mandatory)MOD SCTPLNK(Optional)

Meaning: Identifies the first local IPaddress that communicates with the

peer end. When it is set to 0, it isinvalid. This IP address must be firstconfigured on the correspondinginterface board.

GUI Value Range: NoneActual Value Range:0.0.0.0~255.255.255.255Unit: NoneDefault Value: None

UDPPN BSC6900 ADDNSVLLOCAL(Mandatory)

Meaning: UDP port number of the localNSVL. When "Subnet Protocol Type"of NSE is "Gb over IP" and"Subnetwork Configure Mode" is"Static", the setting of this parametermust be consistent with the setting atthe SGSN side.

GUI Value Range: 1214~2001,2005~3783, 3786~4783, 4785~65000Actual Value Range: 1214~2001,2005~3783, 3786~4783, 4785~65000Unit: NoneDefault Value: None

UDPPN BSC6900 ADDNSVLREMOTE(Mandatory)MODNSVLREMOTE(Optional)

Meaning: UDP port number of theremote NSVL. The setting of thisparameter must be consistent with thesetting at the SGSN side.

GUI Value Range: 0~65535Actual Value Range: 0~65535Unit: NoneDefault Value: None

IP BSC6900 ADDNSVLLOCAL(Mandatory)

Meaning: IP address of the local NSVL

GUI Value Range: NoneActual Value Range:0.0.0.0~255.255.255.255Unit: NoneDefault Value: None