paint and epoxy

3
S/N Description Application as stated in the submittal Application as per product data sheet Manufacturer  Country of origin Transmi no. a. Concrete Repair Compound a. Grouting of machine foundation b. Tie Rod Hole Filling b. Grouting of columns in pre-cast construction c. Grouting of concrete anchors, cavities, gaps and recesses d. Grouting of base plates e. General concrete repairs f. Thickness per pour: Minimum gap = 10mm; Max. = 75 mm. a. Structural repair of damaged concrete a. Structural repair of deteriorated concrete b.Base plate grouting b. Casting sections or members where the volumes required are too large for conventional grout c. For too small and inaccessible s ections or members for normal concreting applications d. Re-profiling of damaged concrete members, using formworks e. Base plate grouting where thickness exceeds 75 mm. f. Thickness per pour: Minimum gap = 50mm (100 mm for base plate grouting); Max. = 500 mm. a. Grouting of penstock & stoplog frame a. For grouting: Beneath bridge bearing, parapet post and flanged lighting column, heavy stanchion bases b. Baseplate for reciprocating machines Prepared by: D. Manabat Jr. Reviewed by: Alfonso Sincioco Snr Engr. - QA/QC QA/QC Manager 2 Conbextra BB80 3 Sika Gulf BSC CON 0147_ CON 0198_ UAE  Al Gurg Fosroc LLC Bahrain Doha North Sewage Treatment Works Civil Project: 682/1 Paint/epoxy materia ls for site use 1 Sika Gulf BSC CON 0006_ Bahrain 1 of 4

Upload: rahul-kalathingal

Post on 18-Oct-2015

85 views

Category:

Documents


0 download

DESCRIPTION

model

TRANSCRIPT

  • 5/28/2018 Paint and Epoxy

    1/3

    S/N DescriptionApplication as stated in the

    submittalApplication as per product data sheet Manufacturer

    Country o

    origin

    a.Concrete Repair

    Compounda.Grouting of machine foundation

    b.Tie Rod Hole Filling b.Grouting of columns in pre-cast construction

    c.Grouting of concrete anchors, cavities, gaps and recesses

    d.Grouting of base plates

    e.General concrete repairs

    f.Thickness per pour: Minimum gap = 10mm; Max. = 75 mm.

    a.Structural repair of

    damaged concretea.Structural repair of deteriorated concrete

    b.Base plate groutingb.Casting sections or members where the volumes required are too

    large for conventional grout

    c.For too small and inaccessible sections or members for normal

    concreting applications

    d.Re-profiling of damaged concrete members, using formworks

    e.Base plate grouting where thickness exceeds 75 mm.

    f.Thickness per pour: Minimum gap = 50mm (100 mm for base

    plate grouting); Max. = 500 mm.

    a.Grouting of penstock &

    stoplog frame

    a.For grouting: Beneath bridge bearing, parapet post and flanged

    lighting column, heavy stanchion bases

    b. Baseplate for reciprocating machines

    Prepared by: D. Manabat Jr. Reviewed by: Alfonso Sincioco

    Snr Engr. - QA/QC QA/QC Manager

    2

    Conbextra

    BB803

    Sika Gulf BSC

    UAEAl Gurg Fosroc

    LLC

    Bahrain

    Doha North Sewage Treatment Works

    Civil Project: 682/1

    Paint/epoxy materials for site use

    1 Sika Gulf BSC Bahrain

    1 of 4

  • 5/28/2018 Paint and Epoxy

    2/3

    S/N Material Description Application of UseAPPROVED

    MANUFACTURER

    COUNTRY OF

    ORIGINKSES Ref. No.

    1 SikaGrout 114

    a. Concrete Repair Compound

    b. Tie Rod Hole Filling c.

    Base Plate Grout d.

    Max of 75 mm gap

    Sika Gulf BSC Bahrain CONC 0006_0

    2 Hydrocell XL 20 mm

    a. Movement joint - protection for

    water stop center bulb. B.

    Expansion joint in concrete,brickworks & blockworks

    Al Gurg Fosroc LLC UAE CONC 0032_0

    Renderoc LAXtra

    a. Structural repair of all type of

    load bearing concrete structure.

    B. Repair of deep honey comb ( 50

    mm)

    Renderoc Sxtra

    a. Patch repair works of floor slabs,

    stairs, steps & other areas which

    requires heavy foot traffic

    Nitoprime ZincrichAnti Corrosion primer for exposed

    Rebar

    Nitobond EP

    Bonding fresh wet cementitious

    material to existing cementitious

    surface

    Nitobond ARprimer and bonding agent for

    renderoc repair systemReebol cleaning of formwork and mould

    RendecureCuring Compound for concrete

    repair

    4 Hilti Hit Hy 150

    Adhesive Grout for Rebar

    Anchoring up to 25 mm and not

    subject for water immersion

    Hilti Corporation Qatar CONC 0041_1

    5 Nitoseal 220

    Sealing movement joints in bldg.

    construction above or below

    ground. Suitable for areas subject

    to fuel & chemical spillage

    Al Gurg Fosroc LLC UAE CONC 0046_1

    6 Lokfix S25Anchoring Adhesive Grout for

    RebarAl Gurg Fosroc LLC UAE CONC 0052_1

    7 Hilti Hit RE 500Adhesive Grout for Rebar

    Anchoring up to 40 mmHilti Corporation Qatar CONC 0105_0

    8 Renderoc BF2 Repair of Chamfer on Columns Al Gurg Fosroc LLC UAE CONC 0136_0

    Sikadur 31 Sealing of Cracks

    Sikadur 52 Injection Fluid

    10 Nitoseal MS 300Expansion Joint sealant on slab w/

    traffic loadAl Gurg Fosroc LLC UAE CONC 0116_0

    11 Siikarep 100Thin Layer render coat on concrete

    and mortarSika Gulf BSC Bahrain CONC 0142_0

    12 Polyseal PPUjoint sealant for horizontal area w/

    maximum slope gradient of 10%

    Henkel Polybit

    Industries Ltd.UAE CONC 0143_0

    Sika Injection 101

    Sika Injection 201

    Sika Injection 306

    14Polyseal PPU GG /

    Polyprime PS - primer

    Self Leveling, suitable for horizontal

    & Vertical application

    Henkel Polybit

    Industries Ltd.UAE CONC 0161_0

    15 Nitomortar FC

    for surface preparation to concrete

    protection works of epoxy coating

    class A & C

    Al Gurg Fosroc LLC UAE CONC 0164_0

    16 Rhodorsil 616 Fill SytemGlazing weather seals to glass,

    coated aluminum & masonry

    Technical supplies &

    ServicesUAE ARCH 0003_1

    17 Masterflex 700Water proofing System for

    Movement Joint

    BASF Construction

    Chemicals

    18 ConmasticWater proofing System for roof

    Abut or Termination areaColmef

    19 CP 606 (fire stop sealant) Block wall control joint Hilti Corporation Qatar CONC 0067_0

    1200G Silicone SealantGlazing as cap beading and

    termination sealingAl Muqarram Industry UAE

    Foster 95-44

    Fire Resistive, flexible butly

    elastomer based vapor barrier

    sealant

    H.B. Fuller Company USA

    TIC 7030 Insulation Joint Sealant TIC Corp. Korea

    21 Nitobond SBR

    Bondind agent or priming paste

    prior to screeding andplastering/rendering Al Gurg Fosroc LLC UAE ARCH 0056_0

    Approved Materials and Manufacturer for Joint Sealant and Concrete Repair

    13

    Sika Gulf BSC Bahrain

    Sika Gulf BSC Bahrain

    3 Al Gurg Fosroc LLC

    20 MECH 0398_1

    UAE

    9

    CONC 0034_1

    CONC 0154_0Repair of Leaks to Concrete Water

    Retaining Structure

    CONC 159_0

    ARCH 0061_1UAE

    2 of 3

  • 5/28/2018 Paint and Epoxy

    3/3

    S/N Material Description Application of UseAPPROVED

    MANUFACTURER

    COUNTRY OF

    ORIGINKSES Ref. No.

    Approved Materials and Manufacturer for Joint Sealant and Concrete Repair

    22 Conbextra BB80Grouting of Penstock and Stoplog

    frameAl Gurg Fosroc LLC UAE CONC 0198_0

    23 Sikadur 31 LP Sealing of Core Drilling Sika Gulf BSC Bahrain CONC 0191_0

    24 SikaFlex Construction D Sealing of GRC Moulding / Louvers Sika Gulf BSC BahrainARCH 0030_2 /

    ARCH 0103_2

    3 of 3