panasonic dp 1810p

DP-2010Ewith Options

DP-1810Pwith Options

Digital Imaging Systems

Before operating this equipment, please read these instructions completely and keep these operatinginstructions for future reference.

Get

ting

To K

now

You

rM

achi

ne

J

?

I

Bef

ore

Sta

rting

Mak

ing

Copi

esO

ptio

nsO

ther

s

Model No. DP-1510P/1810P/2010E

Operating Instructions(For Copier)

English

2IMPORTANT INFORMATIONWhen requesting information, supplies or service always refer to the model and serial number of yourmachine. The model and serial number plate (Main Name Plate) is located on the rear side of machine.For your convenience, space is provided below to record information you may need in the future.

Model No.

Serial No.

Date of Purchase

Dealer

Address

Telephone Number( )

Supplies Telephone Number( )

Service Telephone Number( )

Model and Serial NumberCopyright 2002 by Matsushita Graphic Communication Systems, Inc.

All rights reserved. Unauthorised copying and distribution is a violation of law. Printed in Japan.The contents of these Operating Instructions are subject to change without notice.

(Digital copier with ADF option)

3Operation ChartCommon Features and Usage

Basic Operation

Original

1Place theOriginal

2Original Size(Reduction/EnlargementOnly)

3Copy Size(Reduction/EnlargementOnly)

4Numberof Copies

5PressSTART

Position of the Original

Load PaperTurn the PowerSwitch On

CPlace originals face down on theplaten or face up on the ADF.

C If the original is not positionedproperly, a portion of the originalmay not be copied.

CFor originals smaller than A5 size,position the original within the areaof A5 and select A5.

Commonly Used Functions and Operating ProceduresFull SizeMakes a copy that is the samesize as the original 1 4 5Reduction or EnlargementCopies the original at a fixedreduction or enlargement ratio 1 3 42 5

Memory CapacityWhen the memory becomes full during original scanning, the message OUT OF MEMORYCONTINUE? 1: YES 2: NO will be displayed in the message display. In this case, follow theoperating instruction in the message display.When additional memory is required, consult with an authorised servicing dealer.

(See page 12)

(See page 13)G

ettin

g To

K

now

Yo

ur

Mac

hine

A5A5A4

A4 B4FLS A3

A3

B4

FLS2

FLS1A5A4

A5

A5 A5 R

A4 R

FLS

B4

A3A4

Original Guide

Original GuidesAdjust to the originals width

ADF Tray

From PlatenFrom ADF (or i-ADF)

4Energy Star

As an ENERGY STAR Partner, Panasonic has determined that this product meets theENERGY STAR guidelines for energy efficiency.This voluntary program specifies certain energy consumption and usage standards. Thisproduct will automatically power down after a specified period of non-use. The use of thisENERGY STAR compliant product will reduce energy consumption and ultimately benefit theenvironment.

The default functions can be adjusted depending on your office requirements.Please ask your authorised Panasonic dealer for more details.

5Table of ContentsGetting To Know Your Machine

Operation Chart .............................................................................................................................. 3 Common Features and Usage ..............................................................3

Before StartingPrecautions ..................................................................................................................................... 7

Control Panel ................................................................................................................................ 10

Making CopiesBasic Copy .................................................................................................................................... 12

Full Size Copying ................................................................................ 12 Reduction or Enlargement Copying .................................................... 13 Zoom Copying .................................................................................... 14 Using the Sheet Bypass ..................................................................... 15

Creative Features ......................................................................................................................... 16 2 in 1 Copy ......................................................................................... 16 2 Page Copy ....................................................................................... 17 Book/Edge/Margin .............................................................................. 18 2-Sided/1-Sided Copy ......................................................................... 19 1 \ 2/2 \ 1/2 \ 2 Copy .................................................................... 20 Book \ 2 Copy .................................................................................. 21 Job Memory ....................................................................................... 22 Sort Copy ........................................................................................... 23

Other Features .............................................................................................................................. 24 Energy Saver/Interrupt Mode .............................................................. 24 Skyshot Mode ..................................................................................... 25

Combined Function Table ............................................................................................................ 27Function ........................................................................................................................................ 28

Checking the Copiers Total Counter ................................................... 28 General Functions .............................................................................. 29 Copier Settings ................................................................................... 30 General Functions for Key Operator ................................................... 31 Copier Settings for Key Operator ........................................................ 32 Function Setting .................................................................................. 33 Function Setting for Key Operator ....................................................... 34

For Your Safety ..................................................................................... 7 Handling ...............................................................................................8 Toner and Paper ...................................................................................8 Ventilation .............................................................................................8 Installation ............................................................................................9

Tabl

e of

Con

tent

s

Energy Star ..................................................................................................................................... 4

6Table of ContentsOptions

Accessories .................................................................................................................................. 39 Components ....................................................................................... 39 Automatic Document Feeder .............................................................. 40

Problem SolvingProblem Solving ........................................................................................................................... 42

Adding Paper (J) ............................................................................... 42 Adding the Toner and Replacing Waste Toner Container (?) ............. 43 Removing a Misfed Paper ................................................................... 45

Troubleshooting ........................................................................................................................... 52 Before Calling Service ........................................................................ 52 User Error Codes (U Code) ................................................................ 54

OthersSpecifications ............................................................................................................................... 55Options and Supplies ................................................................................................................... 57

7PrecautionsFor Your Safety

Laser Safety

LASER SAFETYThis unit employs a laser. Only qualified service personnel shouldattempt to service this device due to possible eye injury.CAUTION:USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCEPROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAYRESULT IN HAZARDOUS RADIATION EXPOSURE.

Caution Label

Bef

ore

Sta

rting

(Digital copier with ADF option)

8PrecautionsHandling

Do not look directly at the exposure lamp whencopying.

Do not turn the power switch Off or open the frontpanel during copying.

CDo not drop paper clips or other metal objects intothe copier.

Toner and Paper Store toner, drum and paper in cool areas with low

humidity.CUse high quality 60 - 90 g/m2 (Sheet Bypass:

56 - 128 g/m2) paper.CFor optimum performance, it is recommended that

only Panasonic Brand supplies are used in thecopier.

Ventilation

The copier should not be installed in areas with thefollowing conditions:

CExtremely high or low temperature and humidity.Ambient conditions

Temperature: 10 35CRelative humidity: 45 80%

CWhere temperature and humidity can changerapidly, causing condensation.

CDirect exposure to sunlight.CDirectly in the air conditioning flow.C In areas of high dust concentration.C In areas of poor ventilation.C In areas with chemical fume concentration.C In areas with extreme vibration.CWith unstable or uneven conditions (floors, etc.).

The copier should be installed in a well-ventilatedarea to minimise the ozone density in the air.

9InstallationPrecautions

Bef

ore

Sta

rting

The maximum power consumption is 1.2 kW.A properly wired (grounded), dedicated, 6A, 220-240 V AC outlet is required.Do not use an extension cord.The power cord on this equipment must be used to disconnect the main power.Please ensure that the socket outlet is installed near the equipment and is easily accessible.

FOR YOUR SAFETYCaution Note: Disconnect from the mains supply before removing covers.The mains plug on this equipment must be used to disconnect mains power. Please ensure that thesocket outlet is installed near the equipment and shall be easily accessible.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience.A 13 amp fuse is fitted in this plug.Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13amps and that it is approved by ASTA or BSI to BS1362Check for the ASTA mark 7 or the BSI mark 6 on the body of the fuse.If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse isreplaced.If you lose the fuse cover the plug must not be used until a replacement cover is obtained.A replacement fuse cover can be purchased from your local Panasonic Dealer.IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR OFFICETHEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTEDINTO ANY 13 AMP SOCKET.If a new plug is to be fitted please observe the wiring code as shown below.If in any doubt please consult a qualified electrician.WARNING: THIS APPLIANCE MUST BE EARTHED.IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:Green and Yellow: EarthBlue : NeutralBrown : LiveAs the colours of the wires in the main lead of this appliance may not correspond with the colouredmarkings identifying the terminals in your plug, proceed as follows:The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug whichis marked by letter E or by the safety Earth symbol L or coloured GREEN or GREEN-AND-YELLOW.The wire which is coloured BLUE must be connected to the terminal in the plug which is markedwith the letter N or coloured BLACK.The wire which is coloured BROWN must be connected to the terminal inthe plug which is marked with the letter L or coloured RED.How to replace the fuse.Open the fuse compartment with a screwdriver and replace the fuse.

For U.K.

N

10

No Contents Refer to

#2 in 1 KeyCFrom two 1-sided originals, side by side, to 1-sided copies. Page 16

$2 Page Copy KeyCCopying two facing pages on a A3 size original on two separate A4 size

sheets.Page 17

%Sort KeyCWhen using Electric Sorting Mode. Optional memory is required. Page 23

& MARGIN Key CShifts the image to the right or left. Page 18( EDGE Key CCreates a blank edge. Page 18) BOOK Key CEliminates dark inner binding shadows. Page 18

*

Photo; Text/Photo; Text KeysCSelect the type of original(s) for image density adjustment.

PHOTO : Originals are mainly composed of photo.TEXT/PHOTO: Combined originals with text and photo.TEXT : Originals are mainly composed of text.

Page 12

+ Exposure Keys (DARKER, LIGHTER) Page 12

.FUNCTION KeyCUse when changing the paper size, initial values for functions (default

values) and key operator settings.Pages 28 37

- SET Key CSet the present selection.

Control Panel

NOTE CThe Control Panel displayed above shows only copier functions. Please refer to theappropriate operating instructions for other control panel functions or in the PanasonicDocument Management System CD-ROM for the Printer control panel functions.

CThe illustration above shows the DP-2010E control panel.

/ CLEAR Key CClears the copy count in the display.

0ENERGY-SAVER KeyCCan save power while the copier is not in use. Page 24

1 RESET Key CResets all features to the initial power-on state.

(For DP-2010E only)

11

For DP-1510P/1810P

Control Panel

LCD Display

Warning IndicationsJ Add Paper? Add TonerIMisfeed2 Call Service

No Contents Refer to2 STOP Key CStops the copy run. 3 START Key CUsed to start an operation.

4

INTERRUPT Key, MEMORY IN Key, M1/M2 KeysC Interrupt Key interrupts other copy or print jobs while making copies.CMemory In Key registers two copy jobs for recall at a later time.CM1/M2 Keys are used to store a Job in Memory or to recall a Job stores in Memory.

Pages 22, 24

5 Cursor Keys CCCCCSelect copy ratio and function modes using (G or F). 6 PAPER TRAY Key CCCCCUsed to select the paper tray manually.

7COPY SIZE KeyCUsed to select Reduction/Enlargement only. For additional details, see page 13.

8ORIGINAL SIZE KeyCUsed to select the original size manually. For additional details, see page 13.

9 PRINT Key CCCCCWhen selecting the Printer ON/OFF Line.

NOTE CThe Control Panel displayed above shows only copier functions. Please referto the appropriate operating instructions for other control panel functions or inthe Panasonic Document Management System CD-ROM for the Printercontrol panel functions.

Bef

ore

Sta

rting

:2-Sided/1-Sided Copy KeyC Used to select 1 \ 2, 2 \ 2 and 2 \ 1, Book \ 2 copying

12

Basic CopyFull Size Copying

Copying the Same Size Originals (1:1)Copy size is automatically selected.

1Place the Original

LCD Display (Sample)

ORIGINAL SIZE Key

Select the Original Size on unitswithout the ADF/i-ADF Option.

NOTE

CLEAR Key

2Number of Copies*Up to 999

3Press START**

#Select the Original TypePHOTO : Originals are mainly composed of photo.TEXT/PHOTO: Combined originals with text and photo.TEXT : Originals are mainly composed of text.

$Select Exposure ControlPress the DARKER/LIGHTER keys to adjust the exposure.

Manually Selecting Exposure Control or Original Type

Use Clear key when cancelling the copy count. While the copier is warming up, you may position your original on the copier, enter

your copy job selections and press the Start key. The COPY JOB RESERVEDindicator displays until the warm up cycle is completed and the copy job isautomatically started.

READY TO COPY COPIES:001

13

Copying with Preset Ratios

Basic Copy

100 87 71 50115 100 82 58141 122 100 71200 173 141 100

Reduction or Enlargement Copying

RESET

Mak

ing

Copi

es1Place theOriginal

2Select theORIGINAL SIZE

3Select the COPYSIZE

4Number ofCopies

C If the desired copy size is different from the paper size loaded in the papertray, use the sheet bypass. (See page 15)

CPress the RESET key to cancel all job settings.

5PressSTART

Example: ReductionOriginal size Copy size

A3 A4

The correct ratio is automatically selected.Reduction and enlargement ratios (%)Original

SizeCopy Size

A3 B4 A4 A5A3B4A4A5

CWhen changing the paper tray, press thePaper Tray key.

NOTE

A3 ->A4B [A4B ]ZOOM: 71% COPIES:001

14

NOTE

ATTENTION

ZoomCopies with variable zoom ratios from 50 % to 200 % in 1 % increments. RESET

Zoom CopyingBasic Copy

(Example: 125 % Zoom)

1Place theOriginal

2Press Cursor (G or F)keys to select Zoom Ratio

4Numberof Copies

5PressSTART

CWhen changing the paper size after setting the zoom ratio, please use the paper traykey.


3Select ORIGINALSIZE(without usingADF/i-ADF)

A4 ->A4B [A4B ]ZOOM:125% COPIES:001

B

15

NOTE

ATTENTION

SheetBypass

#Place the sheets of paper intothe tray. (approximately up to50 A4 size sheets 80 /gggggm2)

Basic CopyUsing the Sheet Bypass Copying on Special Paper, etc.

1 Place the original.Open the sheet bypass.

2 Pull out the sheet bypass trayuntil it stops.(For A3 size only)

3Insert the paper until it stops.

$Adjust the side guides.Incorrect adjustment may cause thepaper to wrinkle, misfeed or skew.

Press START.

Side Guides

CAdjust the side guides properly to avoid skewing, wrinkling or misfeeding.

CDo not feed curled paper through the sheet bypass to avoid misfeed.

Do not fill above.

Mak

ing

Copi

es

16

2 in 1 Copy 2 in 1 Copy

From two 1-Sided originals, side by side, to 1-Sided pages.

Creative Features

1 \ 2 (Layout)*

2 \ 1 (Layout)*

Portrait (Orientation)*Landscape (Orientation)*

1 \ 2 (Layout)*

2 \ 1 (Layout)*

4Number ofCopies

ProcedureADF/i-ADF

Face-Up

1Place theOriginals

2Press 2in 1 key

(3)COPY SIZE(Reduction/EnlargementOnly)

5PressSTART

CThe ADF/i-ADF is required for 2 in 1 copy.CPress the RESET key to cancel all job settings.CNumbers in parenthesis ( ) represent that, an additional step is required to

activate the feature. The Orientation and Layout can be set in the Copier Settings function mode.

(See page 30)

NOTE

17

NOTE CTo reset all job settings, press the RESET key.

3ORIGINAL SIZE(A4 or A3 size Only)

4Number ofCopies

5PressSTART

Platen A3 size original

A4

Book Mark

2 PAGE CopyCopying two facing pages on a A3 size original on two separate A4 size sheets.

Procedure

1Place theOriginals

2Press the 2PAGE COPYkey

2 PAGE COPYCreative Features

Mak

ing

Copi

esCentre bookby lengthand widthaccordingto centremarks.

18

NOTE

BOOK/EDGE/MARGINCreative Features

BOOK KeyEliminates dark inner binding shadows when copying from a book.

EDGE KeyCreates a blank edge.

MARGIN KeyShifts the image to the right or left.

Procedure

Initial setting (Factory setting) can be changed in the Copier Settings function mode.(See page 30)

If a part of the copied image is missing when using the Margin mode, change theFrame Reduction setting to ON.(See page 30)


Book Initial Book Margin setting (Factory setting): 20 mm

Initial Equal Rate setting (Factory setting): 5 mm

Initial Left Margin setting (Factory setting): 10 mm

Edge

Margin**

1Place theOriginal

2Press BOOK, EDGEor MARGIN key

5PressSTART

4Numberof Copies

BOOK MARGINCENTER VOID = 20mm

EQUAL RATEVOID MARGIN = 5mm

LEFT MARGIN 10mm

3Press Cursor (G or F) keys to adjustthe void width while the button isblinking. (approx. 5 sec.)CVoid/Margin width: 5-99 mm

19

2-Sided/1-Sided Copy (For DP-2010E)Creative Features

Key OperationPress 2-Sided/1-Sided Copy key (circulation) to select a 2-Sided/1-Sided Copy function.

1 \ 2 From 1-Sided originals to 2-Sidedcopies. (See page 20)


Book \ 2 From book originals to 2-Sided copies. (See page 21)


NOTE

2-Sided/1-Sided Copy key

C2-Sided originals may be handled either manually or automatically using thei-ADF (DA-AR201).

C2-Sided/1-Sided Copy function is only available for DP-2010E.

Mak

ing

Copi

es

20

1 \\\\\ 2 / 2 \\\\\1 / 2 \\\\\ 2 Copy (For DP-2010E) 1 \\\\\ 2 Copy

From 1-Sided originals to2-Sided copies.(From Copier Platen & i-ADF/ADF)

2 \\\\\ 1 CopyFrom 2-Sided originals to1-Sided copies.(Using i-ADF)

Creative Features

NOTE

2 \\\\\ 2 CopyFrom 2-Sided originals to2-Sided copies.(Using i-ADF)

Long Edge (Binding)* Long Edge (Binding)* Long Edge (Binding)

Short Edge (Binding)* Short Edge (Binding)* Short Edge (Binding)

Procedurei-ADF

Face-Up

1Place theOriginals

2Press 2-Sided/1-Sided Copy key(circulation) toselect 1 \ 2, 2 \ 2or 2 \ 1

Number ofCopies

(3)COPY SIZE(Reduction/Enlargement Only)

4 5PressSTART

CTo reset each selection, press the RESET key. The initial setting of binding location for 1 \ 2 Copy and 2 \ 1 Copy (Long edge or

Short edge) can be set in function mode. (See page 30)C1 \ 2, 2 \ 2, 2 \ 1 Copy function is only available for DP-2010E.

(When selecting 1 \ 2 Copy or 2 \ 1 Copy)

BINDING:LONG EDGEPRESS < > TO SELECT

Press the I or H key to selectthe binding location.

21

NOTE

4Number ofCopies

5PressSTART

CTo reset each selection, press the RESET key.CA3 and FLS/B4 copy sizes cannot be selected. The book format and page order can be set in function mode. (See page 30)CBook \ 2 Copy function is only available for DP-2010E.

Platen A3 size original

A4

A3

(3)COPY SIZE(Reduction/Enlargement Only*)

Book \\\\\ 2 Copy (For DP-2010E) Book \\\\\ 2 Copy

From book originals to 2-Sided copies.A3 size originals only.

Facing (Book Format)* Flipping (Book Format)*

1Place theOriginal onthe Platen

2Press 2-Sided/1-Sided Copy key(circulation) to selectBook \ 2

Creative Features

Mak

ing

Copi

esBook Mark

Centre book bylength and widthaccording tocentre marks.

22

NOTE

Creative FeaturesJob Memory

Two Copy Jobs Can Be Programmed in Memory (M1, M2) for recall at alater time.

To Store a Job in Memory#Set up the copy job to be stored in memory,

by first selecting each function you wish thecopier to perform.

$Press the MEMORY IN (F2) key.

%Press the M1 (F3) or M2 (F4) key.

To Recall a Job Stored in Memory&Place the Original

(Press the M1 (F3) or M2 (F4) key.The stored contents will be displayed.

)Press START

CStored job(s) will not be deleted even if the power switch is turned Off.CWhen storing a new job into programmed memory, the previously stored job will be

overwritten.

JOB MEMORYPRESS M1,M2 TO STORE.

RECALL JOB MEMORYLOADING...

23

Creative FeaturesSort Copy

1

11

1

1 1

NOTE CWhen the memory becomes full during original scanning, the messageOUT OF MEMORY CONTINUE? 1: YES 2: NO will be displayed in themessage display. If this occurs, follow the instructions in the messagedisplay.For additional memory consult your authorised servicing dealer.

CTo reset all job settings, press the RESET key.CElectronic sorting function is available for DP-1810P/2010E.

Sort Copy

The sort copy has 2 available electronic sorting functions as follows:Note: Before using the sort copy, select the desired sorting mode by setting its function first (See page 29).

1ADF/i-ADF: Place the

OriginalsPlaten: Place the

First Original

2Select theSORT Mode

(3)COPY SIZE(Reduction/EnlargementOnly)

4Number ofCopies

5PressSTART

6 ANOTHER ORIGINAL?1:YES 2:NOPress 1 key.

7 Place next Original 8 Press START9 Repeat steps 6 and 7until all originals are

scanned and storedinto the copiers memory.

10 ANOTHER ORIGINAL?1:YES 2:NOPress 2 key.

Sort Sort-Rotate

Multiple copiessortedautomatically.

Multiple copies sortedautomatically andStacked in alternatedirection.

(Up to A4 size)

From Platen Glass only:

Platen Glass ADF/i-ADF

Mak

ing

Copi

es

24

NOTE

INTERRUPT (F1) Key ENERGY-SAVER Key

These modes can save power while the copier is notin use.

Energy Saver Mode#To enter this mode

Press the ENERGY-SAVER key or the copier willautomatically enter the ENERGY-SAVER Mode after15 minutes* from the last copy. The indicator will flash.

$To cancel this mode and make copiesPress the ENERGY-SAVER key again.

Sleep Mode#Automatically enters the Sleep Mode after 30

minutes from the last copy. The copier power willdrop and the indicator will light.

$To make copies, press the ENERGY-SAVER key.

Interrupt ModeCThis mode can interrupt other copy jobs while

making copies.#Press the INTERRUPT (F1) key, the indicator will

light.$Make another copy job using the platen glass.%Press the INTERRUPT (F1) key again to continue

the original job.

Note: The ADF/i-ADF can not be used with interrupt. (Use only the Platen)

Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed by thekey operator. (See page 31)

Other Features

Modes Power Consumption Warm Up TimeNormal OperationEnergy Saver Mode

Sleep Mode

Approximately 90 WhApproximately 38 WhApproximately 2.2 Wh

N/A17 sec. recovery30 sec. recovery

ENERGY SAVER

INTERRUPT

Energy Saver/Interrupt Mode

25

NOTE CAn incorrect exposure may occur when there is a black line at the edge ofthe original or an image which the copier interprets as a black pattern in theSkyshot mode.

CAn incorrect position detection of the original may occur when a strong lightshines onto the glass during Skyshot mode.

Other FeaturesSkyshot Mode Skyshot allows copying a manuscript without generating dark borders

even if the platen cover or ADF/i-ADF is opened.Skyshot mode eliminates dark borders around the originals, and is especially convenient forcopying small-sized originals like bank checks or documents with unusual shapes (round, oval,etc.). These documents can be reproduced without generating any unnecessary black areassimply by making a copy with the cover open.

Two types of Skyshot modes can be selected;Digital Skyshot Mode : The scanning area (size) is not pre-determined.Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in

advance. (See page 30) Digital Skyshot Mode

1Place the Original onthe platen (Openingthe Platen Cover/ADF/i-ADF)

Note:The default setting of Digital Skyshot Mode is NORMAL. In this setting, the unit scans once.If there are black areas around the borders in the copies, set the Digital Skyshot Mode toQUALITY to soften the dark borders. In this setting, the unit scans twice.

#Press the FUNCTION key.

$Press the 2 key to select COPIER SETTINGS.

%Press the SET key.

&Press 6 and SET key to select DIGITALSKYSHOT.

(Press 1-3 key to select the Digital Skyshot Mode.1: OFF NONE2: NORMAL Default setting (usually select this

mode).3: QUALITY For better definition, select the

Quality mode.

)Press the SET key.

*Press the RESET key.

FUNCTION MODE (1-2)ENTER NO. OR

2:COPIER SETTINGSPRESS SET TO SELECT

COPIER PARAM. (00-14)ENTER NO._ OR

06 DIGITAL SKYSHOT 2:NORMAL

3PressSTART Key

2Number ofCopies

Mak

ing

Copi

es

26

NOTE

1Place theOriginal

2 3Number ofCopies

4PressSTART

Select the CustomSize (M1 or M2)

Upper-leftcorner

Platen

Skyshot Mode Manual Skyshot Mode

When using this function, the custom size should be registered into memory (M1, M2) inadvance. (See page 32)

Other Features

2

The default size for M1 is: 70(X) 160(Y) mm, and M2 is: 95(X) 220(Y) mmCWhen changing the M1 or M2 size, consult with the key operator.CWhen using the Manual Skyshot mode, M1 and M2 are turned ON and other

job memory cannot be used.CPress the RESET key to cancel all job settings.




07 MANUAL SKYSHOT 1:OFF

#Press the FUNCTION key.

$Press the 2 key to select COPIER SETTINGS.

%Press the SET key.

&Press 7 and SET key to select MANUAL SKYSHOT.

(Press 2 or 3 key to select the Custom Size.1: OFF NONE2: M1 ON M1 size is ON*3: M2 ON M2 size is ON*4: M1, M2 ON Both sizes are ON

)Press the SET key.

*Press the RESET key.

27

NextSelections

2-ORIGINALHHHHH COPY Margin SORT

OtherFunctions

Zoom

Cop

y2

in 1

Cop

y2

Page

Cop

y

Sort-

Rot

ate

Man

ual

Sky

shot

Job

Mem

ory

Retri

eva

l

Job

Mem

ory

Stor

ing

Remarks

FirstSelections

Sort

Book

Edge

Mar

gin

Non

-Sor

t

Combined Function Table

O A A O A A A O O O O O O A A OO A A A A A A O O O O O O A A O

O O O O O O O A O O O O O A A O

O O O O O O O O A O O O O A A O

O O O O O O O O O A O O O A A O

O O O O O O O O O O A A A A A O



O A A A A O O O A A

O O O O O

Zoom Copy

2-O

RIG

INAL

HCO

PYM

argi

nO

ther

Func

tions

SORT

2 in 1 Copy2 Page Copy

Book

Edge

Margin

Non-Sort

Sort

Sort-Rotate

Manual Skyshot

Interrupt

O : Possible Combined Functions. : Unavailable Combined Functions.A : Next Selection is Carried Out. : Indicates that SORT mode cannot be used. Non-sort operation is carried out.

A O O O O O O O O O O O O A A O

1 \

2

2 \

2

Boo

k ->

22 \

1

O O A A A A A O O O O O O A A O1 \ 2O O A A A A A O O O O O O A A O2 \ 2O O A A A A A O O O O O O A A OBook \ 2O O A A A A A O O O O O O A A O2 \ 1

Mak

ing

Copi

es

28

NOTE

Procedure FUNCTION KeyRESET Key

#Press the FUNCTION Key$Press 1 (GENERAL FUNCTIONS) or 2

(COPIER SETTINGS) key. You may also usethe (G or F) keys.

%Press the SET key.&Press the Keypad to select function modes

or use the (G or F) keys.(Follow the on screen instructions.)After setting, press the SET key to set up the

function.

CPlease refer to each options operating instructions for function settings.

PrinterSettings for

Key Operator

GeneralFunctions forKey Operator

CopierSettings for

Key Operator

LAN Settingsfor Key

Operator

Input Identification Code

PrinterSettings

Using Function Modes to Change the Initial Copy Modes

GeneralFunctions

CopierSettings LAN Settings

Options

Function

Checking the Copiers Total CounterTo display the copiers Total Counter, press the COPY SIZE and PAPER TRAY keyssimultaneously.

COPY SIZEKey

PAPERTRAY Key


29

Mak

ing

Copi

es

Function

No. Modes InitialSettingFunction

00 SORT MODE DEFAULT Selects the sort mode.CNON-SORT, SORT (For DP-1810P/2010E)

NON-SORT

General Functions

05 Displays the amount of sort memory used onthe panel.COFF, DISPLAY (For DP-1810P/2010E)

SORT MEMORY USAGE OFF

Copy usage and copy limit of the selecteddepartment and total copy usage will appearon the screen.

DEPT. COUNTER Consultyourservicetechnician.

06

08

09

Select Sort-Rotate mode.COFF, ON (For DP-1810P/2010E)

SORT-ROTATE DEFAULT OFF

KEY OPERATOR MODE Input the key operator ID code.

30


00 MARGIN DEFAULT Selects the margin position and shift value.CPOSITION (Left, Right, Top, Bottom)CVALUE (5 - 99 mm)

POSITION10 mm

Copier SettingsFunction

Selects the edge mode (Equal Rate = set thesame value for X & Y or Individual = set thevalue for X & Y individually) and width.CEQUAL RATE (X & Y ), INDIVIDUALC5 - 99 mm

EDGE DEFAULT

05 Selects whether or not to disable edge deletion.C INVALID, VALID

2 in 1 WITH FRAME

Selects the book Centre Void margin width.C5- 99 mm

BOOK MARGIN DEF.

EQUAL RATE5 mm

20 mm

INVALID

Enables or disables the use of skyshot mode.COFF, NORMAL, QUALITY

DIGITAL SKYSHOT NORMAL

OFF

VALID

Enables or disables the use of ManualSkyshot.COFF; M1 ON; M2 ON; M1, M2 ON

MANUAL SKYSHOT

Input key operator ID code.KEY OPERATOR MODE

Automatically adjusts the copy density for textand photographic originals.C INVALID, VALID

AUTO EXPOSURE

01

02

06

07

08

14

ORIENTATIONL \ R

Selects the orientation and layout for 2 in 1 Copy.CORIENTATION (Portrait, LANDSCAPE)CLAYOUT (L \ R, R \ L)

2 in 1 DEFAULT12

L \ RSelects the 2 page mode.CL \ R, R \ L

2 PAGE MODE DEF.13

INVALIDSelect the reduction ratio in margin mode.C INVALID, VALID

FRAME MARGIN03

OFFFunction sets the duplex priority mode.COFF, 1 \ 2, 2 \ 2, Book \ 2 (For DP-2010E)

2-SIDED MODE DEF.04

09

10

11

LONG EDGESelects the binding location for 1 \ 2 Copy.CLONG EDGE, SHORT EDGE (For DP-2010E)

1 \ 2 BINDING DEF.

LONG EDGESelects the binding location for 2 \ 1 Copy.CLONG EDGE, SHORT EDGE (For DP-2010E)

2 \ 1 BINDING DEF.

FLIPPINGL \ R

Selects the page order and book format forBook \ 2 Copy.1. BOOK FORMAT (1: FACING, 2: FLIPPING)2. PAGE ORDER (1: L \ R, 2: R \ L) (For DP-2010E)

BOOK \ 2 DEFAULT

NOTE CCertain Functions or Parameters are available for selection only when theirrespective option is installed.

31

FunctionGeneral Functions for Key Operator


NOTE

Selects the Control Panel reset time.COFF, 30 sec, 1 min., 2 min., 3 min., 4 min.

Selects the message language of the display.CA-ENGLISH, C-FRENCH, SPANISH

AUTO RESET TIME

LANGUAGE DEFAULT

05 Sets the paper tray for special paper (ex: coloured).CNONE, TRAY 1, TRAY 2, BYPASS

SPECIAL TRAY 1 NONE

Sets the Energy Saver mode and time.C INVALID, ENERGY-SAVER, SLEEP

Energy save mode timer : 1-120 minutesSleep mode timer : 1-120 minutes

ENERGY SAVER MODE

1 min.

SLEEP

A-ENGLISH

KEY/TOUCH BEEP Sets the panel touch sound.COFF, SOFT, LOUD

SOFT

01

02

04

09

Consultyourservicetechnician.

Monitors copy usage of each department.(1) TOTAL COUNTER(2) DEPT. COUNTER(3) DEPT. COUNTER LIST

DEPT. COUNTER MODE

Sets the IP Address assigned to your machine.C3 digit 4 (Use the MEMORY IN key to

enter the . between each set of 3-digitnumbers)

TCP/IP ADDRESS

Sets the Subnet Mask.C3 digit 4 (Use the MEMORY IN key to


TCP/IP SUBNET MSK

Sets the Subnet Mask.C3 digit 4 (Use the MEMORY IN key to


TCP/IP G/W ADDR.

14

22

23

24

C It is necessary to input the Key Operator ID code before changing items onthis page.

CThe Special Tray 1 and 2 are not auto-selectable in the switching mode. Not available for plain copier, but will be available when installing options

with advanced functions. (See page 57)

Sets the paper tray for special paper.CNONE, TRAY 1, TRAY 2, BYPASS

SPECIAL TRAY 2 NONE06

Sets the sound when put paper(s) on bypasstray.C1: INVALID 2: VALID

BYPASS SET BEEP INVALID10

Sets the sound when put paper(s) on ADF.C1: INVALID 2: VALID

ORIG. SET BEEP ADF VALID11

Prints list containing Current Setting andStandard Setting.

COPY SETTING LIST25

ContactyourNetworkAdminstrator.ContactyourNetworkAdminstrator.ContactyourNetworkAdminstrator.

Mak

ing

Copi

es

Total print out volume from the main unit.TOTAL COUNT15

Total print out volume from the PC.PC PRINT COUNT16

Sets the paper size of each paper tray.CTray-1, Tray-2, Tray-3, Tray-4

PAPER SIZE Consult yourservice technician.

00

32

NOTE


FunctionCopier Settings for Key Operator

ORIGINAL (HOME)

Selects contrast for Text/Photo modeC1 ~ 5

T/P CONTRAST 3

PHOTO CONTRAST Selects contrast for Photo modeC1 ~ 5

T/P(Text/Photo)

Selects original settingCTEXT, T/P (Text/Photo), PHOTO

3Selects contrast for Text modeC1 ~ 5

TEXT CONTRAST

3

MAX. COPY SETTING Determines whether to limit number of copiesC1 ~ 999

999

01

02

03

04

10

Input a size in memory 2 for frequent usagesize.CX: 5~432/Y: 5~297 mm

(See page 22)

M2, SIZE 95 220 mm(X) (Y)

70 160 mm(X) (Y)Input a size in memory 1 for frequent usagesize.

CX: 5~432/Y: 5~297 mm(See page 22)

M1, SIZE

16 MEM. FULL ACTION Selects the memory full actionCPRINT, CANCEL

Print

12

13

C It is necessary to input the Key Operator ID code before changing items onthis page.

33

Mak

ing

Copi

es

Function Setting Changing the Auto Exposure Setting

You can select whether the copying density is adjusted automatically for text and photographicoriginals.

1 FUNCTION Key

2 #Press the 2 key to select COPIER SETTINGS.$Press the SET key.

%Press 8 and SET key to select AUTOEXPOSURE MODE.

&Press 1 or 2 key to select whether AutoExposure is to be carried out or not.

(Press the SET key to set up the AUTOEXPOSURE MODE.

)Press the RESET key to exit the Function mode.

Function

Proceed as Follows:FUNCTION MODE (1-2)ENTER NO. OR



08 AUTO EXPOSURE 2:VALID

Press the FUNCTION key.

34

Function Setting for Key Operator Changing the Paper Size

The Paper Trays are designed to accommodate A5, A4, A4 R, FLS/B4 and A3 size paper. Tochange the paper size, perform the steps shown below.

1 FUNCTION Key

2 Proceed as Follows:#Press the 1 key to select GENERAL

FUNCTIONS.

$Press the SET key.

%Press 9 key.

& Input the Key Operator ID code (3 digit)and the SET key.

(Press 00 and 1 or 2 key to selectthe PAPER SIZE.

)Press SET to select the paper tray andpress (G or F) keys to set the papersize.Paper size changes are as follows.

*Press the SET key to set up the PAPERSIZE.

+Press the RESET key to exit the Functionmode.

Function


1:GENERAL FUNCTIONSPRESS SET TO SELECT

GENERAL PARAM. (0-9)ENTER NO._ OR

09 KEY OPERATOR MODEENTER PASSWORD=-

KEY OPR. MODE (00-25)ENTER NO._ OR


00 PAPER SIZE 1:TRAY-1[A3i]

A3 B4 A4

B5RFLS1A4R FLS2 B5A5

35

NOTE

Function

Changing the Paper Guide and Paper Size Indicator in the Paper Tray

#Pull the Paper Tray out and removepaper.

$Adjust the paper guide a to therequired paper length.

%Adjust the Paper Guide b to therequired paper width.Pinch the stopper to move the PaperGuide b.

&Change the Paper Size Indicator.

PaperGuide aaaaaStopperPaperGuide bbbbb

SizeIndicator

(Close the Paper Tray.

3

C It is recommended that the paper guide b be fixed in place with screws.Consult an authorised servicing dealer for details on how to fasten withscrews.

Function Setting for Key Operator

Mak

ing

Copi

es

36

Department CounterThe Key Operator can manage, limit copies, counters and code numbers for each department.(Maximum department counters: 50)

1 FUNCTION Key

2 Proceed as Follows:#Press the 1 key to select GENERAL

FUNCTIONS.

$Press the SET key.

%Press 9 key.

&Press the Key Operator ID code (3 digit)and SET key.

(Press 14 and the SET key to selectDEPT. COUNTER MODE.

NOTE CTo reset the function mode, press the RESET key.

CContact your authorised servicing dealer to enable the Department Counterfeature.

Function Setting for Key OperatorFunction


1:GENERAL FUNCTIONSPRESS SET TO SELECT

GENERAL PARAM. (0-9)ENTER NO._ OR

09 KEY OPERATOR MODEENTER PASSWORD=-

KEY OPR. MODE (00-25)ENTER NO._ OR


37

Mak

ing

Copi

es

Change the Department ID Code, limit the maximum number of copiesand Department Counter number.

#Press the Keypad and the SET key to input theDepartment ID Code.

01: 1234 Department ID Code

Department No.

$Press the Keypad and the SET key to input themaximum number of copies.

01: 123456 Maximun number of copies (6 digits)

Department No.

%Press the Keypad and the SET key (G or F keys) toselect the Department No.

01: 123456 Counter (6 digits)

Department No.

&Press 0 and the SET key (Input 0) to clear the counter.

DEPT.COUNTER MODE 1:TOTAL COUNTER

3 Select the Department Counter Mode.Press 2 and the SET key.

NOTE

Function

CTo reset the function mode, press the RESET key.

DEPT. CODE (01-50)ENTER NO. OR

DEPT.COUNTER 01:123456

MAX COPIES 01:123456

ID CODE 01:1234

4

Function Setting for Key Operator

39

DP-2010Ewith Options

DP-1810Pwith Options

AccessoriesComponents

ADF (Automatic Document Feeder)(DA-AS180)CFeeds originals automatically.C2 in 1 Copy

ADF

Zoom

Cop

y2

in 1

Cop

y2

Page

Co

py

Book

Edge

Mar

gin

Non

-Sor

t

Sort

Sort-

Rot

ate

Manu

al Sk

ysho

t

Image Memory(DA-SM08B/SM16B/SM64B/SM28B)C8/16/64/128 MBCTo increase the memory capacity for

electronic sorting and sort printing.(For DP-1810P/2010E)

CTo increase the memory capacity for sortprinting. (For DP-1510P)

2nd/4th Paper Feed Module(DA-DS182)CTo increase the paper feed sources

and capacity.Paper Feed Module 1 (550 sheets)

PCL6 is a Page Description Language of the Hewlett-Packard Company.CThe table below shows the options which are required for various functions.CContact your authorized servicing dealer for details on combinations of options.

2-ORIGINAL HCOPY Margin SORT

OtherFunctionsFunction

Options

i-ADF:Required

NOTE

PCL6 Emulation Kit(DA-PC210)CPrinter Controller for PCL6*

10/100 Ethernet Interface/Internet Fax Kit(DA-NE200)CNetwork Interface Board

Opt

ions

i-ADF (Inverting Automatic Document Feeder)(DA-AR201)CFeeds original automaticallyCDuplexingC2:1 CopyC2 in 1 Copy

3rd Paper Feed Module(DA-DS183)CTo increase the paper feed sources

and capacity.Paper Feed Module 1 (550 sheets)

1 \

2

2 \

2

Boo

k \

2

2 \

1DP-2010E

DP-1510P/1810P

40

ADF (DA-AS180) / i-ADF (DA-AR201)1. Features

#Automatic Original FeedingCThe ADF/i-ADF tray can hold up to 50 A4 size originals of 80 g/m2 paper (up to 30 FLS/B4 or

A3 size originals). It can accommodate from A5 to A3 size originals.CAutomatic original size detection.

$2 in 1 CopyCTo make a 1-Sided copy (full size or reduction), from two 1-Sided originals side-by-side.

%Duplex Copying (DA-AR201)CThe i-ADF allows you to copy 2-sided originals either manually or automatically.

Accessories

2. Components


ADF Tray

Automatic Document Feeder

CSet the originals up to the upper limit arrow.

ADF (DA-AS180)


i-ADF Tray

i-ADF (DA-AR201)

41

3. Operation Operation Procedure

ADF/i-ADF

Face-Up

1Place theOriginal

3 4

Inappropriate OriginalsCPaper with a smooth surface such as glossy

and coated papersCTransparenciesCOriginals with a lead edge that is creased,

folded, punched or glued

Accessories

CPaste-upsCPressure sensitive or carbon backed papersCPaper with excessive curlCStapled originalsCFreshly printed copies from a laser printer

NOTE CTo copy these kinds of originals, use the Platen Glass instead.

(2)For Duplex Copy(If required)

Number ofCopies

PressSTART

Opt

ions

42

550-Sheet Paper Tray

Problem Solving

1 Pull the Paper Tray out.

2 Place the paper with the copyingsurface facing upward.Special papers, like glossy paper, mailinglabels and transparencies cannot be usedin the paper tray.Use the Sheet Bypass for special paper.

3 Make sure paper is not loadedabove the overfill indicator locatedin the Paper Tray.

Adding Paper (JJJJJ)

ATTENTION CDo not use paper with folds or wrinkles.Refer to page 35 for details on adjusting the paper tray size.CUnused paper should always be placed into a bag and the opening should be sealed

for storage.If the paper is left exposed, problems such as paper curl, paper jams, wrinkles orloss of copied image quality may occur.

4 Firmly push the Paper Tray backinto the copier.

43

Adding the Toner and Replacing Waste Toner Container (?????)

1 Open the Front Cover.

2 Remove the Waste Toner Container byslowly pulling it towards the left asillustrated.

3 Seal the container with the enclosedcap and dispose of it properly.

4 #Turn the empty Toner Bottlecounter-clockwise until it stops. TheArrow mark (Unlocked symbol )visible on the end of the TonerBottle is aligned with the Arrowmark on the machine.

Note: To prevent toner spill, ensurethat the key is facing upwardsbefore removing the toner bottle.

$Pull the empty Toner Bottle out.Note: If the bottle will not pull out from

the machine, turn the bottleslightly in either direction torelease the key and try it again.

Cap

Problem Solving/U13

CFor optimum copy quality use the recommended Panasonic toner. Store toner in a cooldark place. Do not unseal toner before use. Use it as fast as possible after unsealing.

CWhen U13 is displayed the Add Toner Warning Indicator will begin to flash. This messageis to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed).This message will continue to be displayed until the bottle is replaced. When the count-down counter reaches 0, the copier will stop operating. To clear the message and enablethe copier to operate, replace the empty toner bottle with a new one.

ATTENTION

?

J

2

1

Continued on the next page...

44

5 #Shake the new Toner Bottle fouror five times to loosen thecontents.$Remove the cap from the Toner

Bottle.

6 #Align the Key of the bottle, alsorepresented by the Arrow mark(Unlocked symbol ) visible onthe end of the Toner Bottle withthe Arrow mark on the machine.

Note: To prevent toner spill,ensure that the key is facingupwards before installing thebottle.

$ Insert the bottle as far as it willgo, then turn it clockwise (160,approx. 1/2 turn) until it locks(Locked symbol ).

Note: If the bottle is not insertedall the way into the machineas illustrated, turn the bottleslightly in either direction toengage the key and try itagain.

7 Install a new Waste TonerContainer.

8 Close the Front Cover.

Problem Solving

CDo not reuse the toner from the Waste Toner Container.

1

2

ATTENTION

Adding the Toner and Replacing Waste Toner Container (?????)

1

2 2-1

2-2

2-3

Incorrect Correct

45

NOTE CMake sure that the misfeed indicator goes off after removing the misfedpaper.CThe misfeed indicator will not go off if the paper is still jammed in the copier.

Check again and remove all misfed paper.

Paper Misfeed Locations

A: ADF (see page 51), i-ADF(see page 50)(J70, J71)

B: Copier (Paper Exit, Paper Entry/Transport,ADU) areas (see page 46-48) (J51 - J59,J80)

C: Paper Feed Module (see page 49)(J00 - J50, J81-J89)

I Misfeed Indicator

Removing a Misfed PaperProblem Solving

Paper Misfeed Indicators and LocationsWhen a paper misfeed occurs, the misfeed indicator and the misfeedlocation(s) will be displayed on the panel display.

I

For DP-1510P/1810P For DP-2010E

46

ATTENTION

Removing a Misfed Paper

CMake sure that the misfeed indicator goes off after removing all misfed paper.

1 Remove the misfed paper.

Paper Exit Area

CMake sure that the misfeed indicatorgoes off after removing all misfedpaper.

Problem Solving


47

Problem Solving

1

2

3

Open the Right Cover.

Remove the misfed paper.

If copy paper is fed far into the copier:#Turn the right paper clearing knob.$Remove the misfed paper.

Paper Entry/Transport Area


ATTENTION

4 #Open the Heat Roller Cover.$Remove the misfed paper.%Close the Right Cover.Caution: This fuser area may be

hot.Cautionheatedsurface

CMake sure that the misfeed indicator goes off after removing all misfed paper.

I


48

Problem Solving

1

2

Open the Right Cover.

Remove the misfed paper.

ADU Area (For DP-2010E only)CMake sure that the misfeed indicator

goes off after removing all misfedpaper.


3 If copy paper is fed far into the copier;#Turn the right paper clearing knob.

4 Close the Right Cover.

$Remove the misfed paper.

49

Problem Solving

1

2

#Pull the paper tray out.$Remove the misfed paper.%Return the Paper Tray to the original

position.

#Open the Feed Cover.$Remove the misfed paper.%Close the Feed Cover.

Paper Feed Module


CMake sure that the misfeed indicator goes off after removing all misfedpaper.ATTENTION


I

50

ATTENTION


CPush the tab on the centre of the Entry Cover to close it.CTo prevent original(s) damage, please make sure to open the ADF Cover before

removing misfed original(s).

i-ADF (For DP-2010E only)CMake sure that the misfeed indicator

goes off after removing all misfedpaper.

Problem Solving

1

2

#Open the Entry Cover.$Remove the misfed paper.%Close the Entry Cover.

#Open the ADF Cover.$Remove the misfed paper.%Close the ADF Cover.&Open and close the Entry Cover to

reset the error.

3 #Lift up the ADF Input Tray.$Open the ADF exit cover.%Remove the misfed paper.&Close the ADF exit cover.(Close the ADF Input Tray.

51

Problem Solving

ATTENTION

1

2

#Open the Entry Cover.$Remove the misfed paper.%Close the Entry Cover.

#Open the ADF Cover.Note: To prevent damaging the originals,

open the ADF Cover beforeremoving the misfed original(s).

$Remove the misfed paper.%Close the ADF Cover.&Close the ADF.

ADF


CTo prevent original(s) damage, please make sure to open the ADF Coverbefore removing misfed original(s).

I

For DP-1510P/1810P

52

TroubleshootingBefore Calling Service

Check Action

Unit Does Not Operate

Does the display light?Check if the Power Switch is turned On andthat the power cord is connected into theoutlet.

Does the Energy Saver key flash (or light)and displays are turned OFF? (See page24)

Press Energy Saver key on the ControlPanel.

Perform actions in accordance with eachmessage.

Does any of the U## codes and messagesappear on the display?(U01, U07, U13, U14, U20 and U21)(See page 54)

Add paper. (See page 42)Does the add paper indicator and messageappear on the display? (J)

Remove the misfed paper. (See page 45)Does the paper misfeed indicator andmessage appear on the display? (I)

Turn the copier Off, then On. If the ErrorCode does not clear, call for service.

Does E#-## indicator and message appearon the display?

(No) (Yes)

When the Add Toner Warning Indicator begins to flash or is lit, replace the toner bottle with a newone. After this warning is activated, machine operation will begin with the Toner Charging Mode(approximately 3 minutes to complete) each time the power switch is turned Off then On or if theFront/Right Cover is opened and then closed.

Note: When the warning indicator starts flashing, a 300-sheet count-down counter is activated,and upon reaching 0 the machine will stop operating. The 300-sheet counter is based on6 % fill, depending on the density some pages may print Blank.

Machine operation and displays are as follows:

1. When turning the power switch to On or opening and then closing the Front/Right Cover, themachine starts to warm-up and the LCD displays:

PLEASE WAIT...

(No)

(No)

(No)

(No)

(Yes)

(Yes)

(Yes)

(Yes)

(Yes)

53

Troubleshooting

Check Action

Light Copies

Does the exposure indicator say Lighter? Press the Darker key until the indicatorLED is set to Darker. (See page 12)

Does the add toner indicator and messageappear on the display? (?) Add Toner. (See page 43)

Marked Copies

Is the copier Platen Glass or Platen Coverdirty?

Clean the Glass or Platen Cover.(See page 54)

2. The Toner Charging Mode starts and the LCD displays:

Add Toner Warning Indicator:CFlashing = Toner Bottle is nearly emptyCLit = Toner Bottle is empty

3. This message is displayed for approximately 200 seconds.

Each is approximately 10 sec.

4. This massage will continue to be displayed until the warm-up cycle is completed, and if the tonerbottle was replaced. Upon completion, the Add Toner Warning Indicator automatically turns Off.

(No) (Yes)

CHARGING TONER

CHARGING TONER

(Yes)

(Yes)

Oth

ers

54

If the measures outlined above do not solve the problem, call your Service provider.

Copier Care As a rule, clean weekly.

Platen/Platen Cover

#Wipe marks off with a cloth and a neutraldetergent.

$Wipe again with a dry cloth.

PlatenCover

Platen(Glass)

User Error Codes (U Code)Troubleshooting

The self-diagnostic functions detect troubles in the important components of the copier.When any trouble occurs, the copier stops.

Code Display Message Check PointsU01 CLOSE FRONT/RT COVER Front Cover is open.U07 CLOSE FEED COVER Feed Cover is open.

U13 TONER IS RUNNING LOWNO WASTE TONER BOX1. Toner Cartridge is incorrectly installed.2. Low Toner or No Toner Waste Container.

U14 WASTE TONER BOX IS FULL1. Toner Waste Container is incorrectly

installed.2. Toner Waste Container is full of toner.

U20 CLOSE ADF COVER ADF Cover is open.

U21 CLOSE PLATEN COVER While the copier is initializing, the ADFCover was opened. (Optional ADF installed)

55

Specifications

DP-1510P/1810P/2010E (Copier)

Platen Type Fixed

Acceptable Originals Sheets, Books (max. A3)Copying Method Laser Electrophotography

Fixing Method Heat Roller Fixing

Resolution Max. 600 dpi

Maximum Copy Size A3

Void Area Max. 5 mm

Warm Up Time Approx. 30 seconds (20C)First Copy Time Approx. 6.5 seconds (A4 , from 1st tray)Multi-Copy Speed DP-1510P : 15 cpm (A4 size)

DP-1810P : 18 cpm (A4 size)DP-2010E : 20 cpm (A4 size)

Enlargement Ratios Preset: 115 %, 122 %, 141 %, 173 %, 200 %Variable: from 101 to 200 % in 1 % increments

Reduction Ratios Preset: 87 %, 82 %, 71 %, 58 %, 50 %Variable: from 99 to 50 % in 1 % increments

Paper Feed Paper Tray (550 sheets 1) + Sheet Bypass (50 sheets)2nd Paper Feed Module (550 sheets - option)3rd Paper Feed Module (550 sheets - option)4th Paper Feed Module (550 sheets - option)

Paper Weight Paper Tray: 60 - 90 g/m2(Sheet Bypass: 56 - 128 g/m2)

Quantity Selector Max. 999 sheets (Output Tray capacity is 250 sheets)Electrical Consumption AC 220 - 224 V, 50/60 Hz, 6.0 A

Energy Consumption Max. 1.2 kW, 2.2 Wh in Sleep Mode

Imaging Method Dry-Type Single component imaging

Dimensions (W D H) DP-1510P/1810P: 588 605 458 mmDP-2010E: 588 605 458 mm

Weight DP-1510P/1810P: 41 kgDP-2010E: 42 kg

Operating Environment Temperature: 10 - 35C Relative Humidity: 45 - 85 %(However, the humidity should be 70 % or less at a temperature of 30C, andthe temperature should be 30C or less at a humidity level of 85 %.)

CSpecifications are subject to change without notice.

Type Desktop

Oth

ers

56

Specifications

ADF (DA-AS180)DA-AS180

2nd/4th Paper Feed Module (DA-DS182)DA-DS182

Weight 5.0 kg

Dimensions (W D H) 558 501 112 mm

Tray Capacity A4, A5: 50 sheets (70 g/m2)FLS/B4, A3: 30 sheets (70 g/m2)

Paper Size A5/A4/FLS/B4/A3

Paper Weight 50 110 g/m2

Electrical Requirements Supplied from the copier

9.5 kg

Dimensions (W D H)Weight



CSpecifications are subject to change without notice.

550 155 585 mm


i-ADF (DA-AR201)DA-AR201

Weight 9.3 kg

Dimensions (W D H) 552 520 135 mm

Tray Capacity A4, A5: 50 sheets (70 g/m2)FLS/B4, A3: 30 sheets (70 g/m2)




3rd Paper Feed Module (DA-DS183)DA-DS183

9.5 kg

Dimensions (W D H)Weight



550 155 585 mm


57

Options and Supplies

The DP-1510P/1810P/2010E is a digital photocopier which can produce images with great clarity.Furthermore, its copying functionality can also be greatly enhanced by the addition of the followingoptions and supplies.We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.

RemarksPart Name Part No.

DA-SM16BImage Memory (16 MB) For Electronic Sorting and Sort Printing

(For DP-1810P/2010E)For Sort Printing (For DP-1510P)

For Electronic Sorting and Sort Printing(For DP-1810P/2010E)For Sort Printing (For DP-1510P)

DA-SM28BImage Memory (128 MB)

DA-AS180Automatic Document Feeder Also referred as ADF

DA-DS1822nd/4th Paper Feed Module

PCL6 Emulation Kit DA-PC210 Printer Controller for PCL6.(For Network Printing, DA-NE200 is also required)

For PrinterPart Name Part No. Remarks

PCL6 is a Page Description Language of the Hewlett-Packard Company.

Options

Toner Bottle DQ-TU10C Waste Toner Container included

SuppliesPart Name Part No. Remarks

NOTE

Oth

ers

DA-AR201Inverting Automatic Document Feeder Also referred as i-ADF (For DP-2010E only)

DA-DS1833rd Paper Feed Module

10/100 Ethernet Interface/Internet Fax Kit DA-NE200

Network Interface Board

For Network PrintingPart Name Part No. Remarks





4th Paper Feed Module is for DP-2010E only3rd Paper Feed Module is for DP-2010E only

Matsushita Electric Industrial Co., Ltd.Osaka 542-8588, Japan

S0602-1062DZSD001730-1June 2002Printed in Japan

For Service, Call:

panasonic dp 1810p

Documents