panel meter - ck-electrical.comck-electrical.com/document/ftproot/meter.pdf · power meter...

MOVING COIL INSTRUMENTS FOR NONELECTRIC VALUES

Model:Y-96 Y-72

These meters can measure the other non-electric values for example,temperature,speed

and so on.

DC Voltmeter

Model:Y-96 Y-72 Y-48

Class:1.5

Specs:3V 5V 7.5V 10V 15V 20V 50V 75V 100V 120V 150V 200V 250V 300V 400V

450V 600V

Note:Over 600V should be used with Ext.Resistor.(Rated Cuuent 5mA).

AC Voltmeter


Class:1.5

Specs:30V 50V 75V 100V 120V 150V 250V 300V 450V 600V For 450-380KV,should be

used with potential transformer secondary voltage 100V.

AC Ammeter


Class:1.5

Specs:0.1A 0.5A 1A 1.5A 3A 5A 7.5A 10A 15A 20A 25A 30A 50A 75-105A(use

Ext.CT 5A)

Note:for60/75/100A direct meter,the class is 2.5.

Advantage:The scale can be easily changed without opening the front frame so

that the class will not be influenced.

Frequency Meter

Pointer Type


Class:1.0

Volt:50V 100V 220V 380V

Freq:44-55Hz 45-66Hz 55-65Hz 47-53Hz 57-63Hz 44-56Hz 54-66Hz 450-550Hz 550-

650Hz

Panel MeterPanel MeterPanel MeterPanel MeterPanel Meter

DC Ammeter


Class:1.5

Specs:25uA 50uA 1mA 2mA 5mA 10mA 20mA 30mA 50mA 75mA 100mA 150mA 200mA

250mA 300mA 500mA 1A 3A 5A 7.5A 10A 20A 30A 50A 75-105A(used with Shunt)

Feature:The scale can be easily changed without opening the front frame so that the

class will not be influenced.

www.ck-electrical.com

138Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]

Model:Y-96 Y-80 Y-72 Y-60 Y-50

Struction:Moving Coil,Moving Iron and Rectifier.

Class:2.0 2.5

Power MeterWattmeters or Varmeters with built-in converter for 1 phase,3P 3W,3P 4W.

Model:Y-96 Y-72

Class:1.5

Voltage:50V 100V 220V 240V 220/380V 240/415V

Current:5a

These meters are used with potential secondary voltage 100V voltage transformer or

secondary current 5A CT.wattmeters with built-in converter for 3P 3W,3P 4W and single

phase.

Power factorFor 3 phases circuits,balanced load 45-65Hz and for 1 phase AC 50Hz.

Model:Y-96 Y-72

Class:2.5

Voltage:100V 380V 440V

Frequency:50Hz 60Hz

Scale graduation:0.5cap-1-0.5ind 0.3cap-1-0.7ind 0.4cap-1-0.4ind 0.7cap-1-0.3ind.

Orders to be Noted:

Type of Current:1P,3P 3W circuits,balanced load.

Rated Volt:The voltage is line voltage(between two wires).

Operating Current:If used with CT,the secondary current 5A or 1A is standard.

Panel MeterPanel MeterPanel MeterPanel MeterPanel Meter

Name Specifications

DC Ammeter

DC Voltmeter

DC Ammeter

DC Voltmeter

Frequency Meter

Power Factor

Meter

Power Meter

1-1000mA

5-1000A

1-50A

1K-0KA

40-1000mA1-1000V

1K-380KV

Remarks

Only AM-80 is available

Direct connection

With EXt.Shunt

Direct connection

With EXt.Resistor

Direct connection

With EXt.CT

Direct connection

With EXt.CT

Voltage:50-380V

Frequency:45-55Hz 45-65Hz 55-65Hz

Voltage:50-380VFrequency:0.5cap-1-0.5ind 0.3cap-1-0.7ind 0.4cap-1-0.4ind 0.7cap-1-0.3indSuitable for 1Por 3P3W Circuit

Voltage:50-380V Current:0.2-5AWith Current or VoltageTransformer

30-1000uA1-1000mA

1K-10KA1-50A

40-1000mV1-1000V

1K-10KA1-50A



Digital Panel MeterDigital Panel MeterDigital Panel MeterDigital Panel MeterDigital Panel Meter

Y-96V Y-96COS Y-96AV Y-96KA

Y-72Hz Y-72v Y-96v Y-96ka

Y-72Hz Y-96Hz Y-48 � 96 Y-48 � 72

Y-150v Y-150a Y-150Hz

ApplicationsDigital panel meter which is various and artistic in appearance design is used for dual slope, high precise A/D changeover circuit

and high light LED cassette setting specification. It is very convenient for user to fix the equipment.

specifications

Description

Direct

input

range

AC 0-100V

AC 0-220V

AC 100-300V

AC & DC digitalvoltage meter

AC & DC digital Ampere meter

Frequency digital meter

AC tri-phase watt meter

AC single-phase watt meter

AC single-phase factor meter

Operation voltage

AC 220V 50/60Hz

AC 220V 50/60Hz

AC 220V 50/60Hz

AC 220V 50/60Hz

Display range

0-1999

0-1999

0-1999

0-1999

0-1999

0.5-0-0.5

Class

0.5

0.5

0.5

–

–

–

Input

current

range

–

–

–

AC 5A

AC 10-5A

AC 5A

AC 380V 50/60HzAC 110V 50/60HzAC 220V 50/60HzAC 110V 50/60Hz


ACDC0-100VAC 10-20ADC 0-10A

AC 10-2KHZ(20-300V)


DD862 Single Phase Energy MeterDD862 Single Phase Energy MeterDD862 Single Phase Energy MeterDD862 Single Phase Energy MeterDD862 Single Phase Energy Meter

DD282 Single Phase Energy MeterDD282 Single Phase Energy MeterDD282 Single Phase Energy MeterDD282 Single Phase Energy MeterDD282 Single Phase Energy Meter

DD282 single phase energy meter is induction meter which is applicable to measure the

rated frequency 50Hz and power loss in electrified wire netting. All technical targets

completely conform to IEC60521.

Application

DD282

DD862-4

Overload

Capacity

200% Ib

Type

DD282

Specifications

Dimension

Accuracy

(Class)

2.0

Insulation

AC voltage 2kV for

1 minute impluse

voltage 6kV

Starting

Current

0.5% Ib

Rated Current (A)

2(4),2.5(10),3(6),

5(10),10(20),20(40),

30(60),40(80)

Rated

Voltage (V)

220

DD862 Single Phase Energy Meter is induction meter which is appliable to measure the

rated frequency 50Hz and power loss in electrified wire netting. The meter has novel

design, rational structure and features of large overload, low power loss and long life

etc. All technical targets completely conform to IEC60521.

Application

Dimension

Specifications

Starting

Current

0.5% Ib

Accuracy

(Class)

2.0

Rated

Voltage

(V)

220

Overload

Capacity

400% Ib

200% Ib

Rated Current (A)

1.5(6),2.5(10),5(20),3(12),

10(40),15(60),20(80),30(100)

3(6),5(10),2.5(5),10(20),

20(40),30(60),40(80)

DD862-4

DD862-2

Type Insulation

AC voltage 2kV

for 1 minute

impulse

voltage 6kV



DDS523 Single Phase Energy MeterDDS523 Single Phase Energy MeterDDS523 Single Phase Energy MeterDDS523 Single Phase Energy MeterDDS523 Single Phase Energy Meter

Made with advanced technique by adopting large scale integrated circuit and highly

reliable stepping motors etc. DDS523 single-phase electronic energy meters are the

newest power counting products in our country to measure single phase AD active en-

ergy with the rated voltage of 220V and the rated frequency of 50Hz. This kind of prod-

ucts can precisely measure active energy both in positive and negative directions. It

order to monitor and control active energy easily, it adopts testing signals with light-

coupled output and light diodes to indicate the used power capacity. Its technical proper-

ties comform to IEC60521 standard.

Application

• High accuracy: Tolerance � ±1%

• High sensitivity: Starting current < 0.4% Ib

• Broad load: Current overloaded multiple > 6 times

• Low power consumption: Meter self-consumption < 0.4W

• High reliability: MTBF > 1/10 mil.hr.

• Light weight: < 0.5kg

Dimension

Specifications

Accuracy

(Class)

1.0

Connection

Mode

Direct Input

Meter Constant

imp/kw.h

6400, 3200,

1600, 800

Rated

Voltage (V)

220

Rated Current (A)

2.5(10), 5(20),

10(40), 20(80)

Type

DDS523

DDS523

At using the meters, customers can get signal samples through enlargement,

multiplication, integral, V/F exchange and divided frequent power on the divided current

and divided voltage meters to drive stepping motors and counters add up energy degrees.

Working Principles



DTSY523 Three Phase Electronic Prepaid Type Energy MeterDTSY523 Three Phase Electronic Prepaid Type Energy MeterDTSY523 Three Phase Electronic Prepaid Type Energy MeterDTSY523 Three Phase Electronic Prepaid Type Energy MeterDTSY523 Three Phase Electronic Prepaid Type Energy Meter

DT86 Three Phase Energy MeterDT86 Three Phase Energy MeterDT86 Three Phase Energy MeterDT86 Three Phase Energy MeterDT86 Three Phase Energy Meter

DT862-4 three phase energy meter and reactive energy meter are induction meters

which are applicable to measure the rated frequency 50Hz and power loss of active

energy meter completely conform to IEC60521.

Application

Specifications

Dimension

DTSY523 (IC card) three phase electronic repaid type energy meter is the new genera-

tion intelligent meter with advanced static integrated technology and SMT craft. Its per-

formance accords with class 1.0 three phase electrical meter of IEC60521. They feature

advanced principle, compact structure, high accuracy and sensitivity, well reliability, long

service life, anti-power theft, strong overload, IC card prepaid, alarming of remainder

charge, storing date for over 10 years, setting secret multi-grade and so on.

Application

DimensionDTSY523

DT86

Rated Voltage

(V)

3x380/220

Type

DT862

Accuracy

(Class)

2.0

DT864 1.0

Connection Mode

Input through current

mutual inductor

Directly input

Input through current

mutual inductor

Rated Current

(A)

3x1(2),3x3(6),3x1.5(6)

3x1(2),3x3(6),3x1.5(6)

3x5(20),3x10(40),3x15(60),3x20

(80),3x30(100)



DDSY523 Electronic Single Phase Energy MeterDDSY523 Electronic Single Phase Energy MeterDDSY523 Electronic Single Phase Energy MeterDDSY523 Electronic Single Phase Energy MeterDDSY523 Electronic Single Phase Energy Meter

DDSY523 adopts large scale special logical circuit and is provided advanced selling

electricity appliance and software. It can calculate AC single phase active energy with

the rated voltage of 220V and the rated frequency of 50Hz. It has various functions of

energy account, load control and customer’ information management,etc. It is an ideal

product to reform the system of using electricity at present, to realize electric energy

commercialization, to solve the problem to collect fees and to carry out actual time moni-

tor and control in using electricity and adjusting the loading state of the electrical net.

Application

SpecificationsDDSY523

Accuracy Rate

Basic Current

Environment temperature

Data Protection

Time accuracy at the beginning

Class 1.0 or Class 2.0

5(20)A or 10(40)A

-25~45˚C, � 85%RH

Time to be preserved after power shutdown � 10 yeas

� 0.5S/d

Dimension

DTS523

Type

DTS523-4

Accuracy

1.0

Manner

Direct Connection

Rated Voltage (V)

3 x 380/220

DTS523 Three Phase Active Energy MeterDTS523 Three Phase Active Energy MeterDTS523 Three Phase Active Energy MeterDTS523 Three Phase Active Energy MeterDTS523 Three Phase Active Energy Meter

It is the new generation intelligent energy meter which adopts advanced static inte-grated technology and SMT craft. The products accord with class 1.0 static AC activethe phase energy meter of IEC1063 standard as well. It has the feature of advancedprincipal, simple structure, high accuracy and sensitivity, high reliability, anti-power theft,strong overload and so on.

Application

Dimension

Specifications

Rated Current (A)

3 x 2.5(10) 3 x 5(20)

3 x 10(40) 3 x 15(60)

3 x 20(80)

3 x 1.5(6)

3 x 3(6)DTS523-2 1.0

Connection With CT

Connection With CT3 x 380/220



MultitesterMultitesterMultitesterMultitesterMultitester

DT920B SP-110 MG28 YX-360 TRN YX-360 TRES

DT266 DT830 DT803B DT890D SP15D

YX1000A EC/1000 YX2000A YX360TRD DT810B

DT810D DT831 DT830B DT820C DT820D



ECS820B ECS820C ECS820D EC820DL(BL) DT830A

ThermostatThermostatThermostatThermostatThermostat

WZA-X KSD-304 SRT1150JSRT1180J

WZA-SJWZA-RF12WZA-BWZA-D



panel meter - ck-electrical.comck-electrical.com/document/ftproot/meter.pdf · power meter...

Documents