paperless e
TRANSCRIPT
PAPERLESS E-CASH MANAGEMENT SYSTEM BY
USING AN I-BUTTON TECHNOLOGY
ABSTRACT
AIM:
The main objective of this project is to develop an embedded system, which can used to
withdraw money at ATM’s using I-Button technology.
IMPLEMENTATION:
This project is implemented 8051 based At89s52 developed board interfaced with I-
Button, keypad, EEPROM for storing the data, LCD for displaying the data.
BLOCK DIAGRAM:
MICROCONTROLLER
AT89S52
LCD 16×2
i-Button
E2PROM
Keypad RPS
Crystal
POWER SUPPLY:
DESCRIPTION:
The i-Button is a computer chip enclosed in a 16mm thick stainless steel can. Because of
this unique and durable container, up-to-date information can travel with a person or object
anywhere they go. The steel i-Button can be mounted virtually anywhere because it is rugged
enough to withstand harsh environments, indoors or outdoors. It is small and portable enough to
attach to a key fob, ring, watch, or other personal items, and be used daily for applications such
as access control to buildings and computers, asset management, and various data logging tasks.
In this work we are going to develop an embedded system board attached with an i-
button reader and i-buttons will be given to some particular persons can be used that i-buttons as
their ATM cards. Our project is that we can recharge our i-button with some amount and that
amount will be reduced whenever we will draw the cash. the amount of cash deposit and
withdraw will be entered by the user through keypad. This project is a prototype of the ATM
application.
Step Down
Transformer
Bridge
Rectifier
Filter
Circuit
Regulator section
SOFTWARE:
Embedded ‘C’
RIDE to write code
ISP to burn the chip
HARDWARE:
At89s52 based our own developed board
Power Supply
I-Button module
EEPROM
Keypad
LCD
ADVANTAGES: Low cost, automated operation, Low Power consumption.
REFERENCES
1. The 8051 micro controller and embedded systems by Mazidi.
2. www.wikipedia.org
3. WWW.atmel.com
4. www.8051projects.com
5. Embedded systems with 8051 by kenith j ayala
6. www.dallas.com