parker boilers indirect pool heaters
DESCRIPTION
Commercial Products covers the features and benefits of Parker's innovative indirect pool heaters.TRANSCRIPT
Commercial Products Corp. –
Indirect Pool Heating Overview
Pool Seminar #25612
Commercial Products Corp. – At A Glance
- Heat Transfer Solutions Since 1972 - Founded in Tampa, FL
- Focus is hydronic, domestic, and steam systems - In-House Startup and Owner Training
Boiler Types
Industry standard:Light, Residential/Commercial Duty Typical Pool Heater
• Normally a low mass .065 wall copper fin or cooper nickel units, 80 to 86% efficiency
• Minimal heating surface and mass, normally 1-2 sf per boiler horsepower
• Some models now available with Stainless Steel condensing secondary heat exchanger to 99%
Industry standardLight, Residential/Commercial Duty Typical Pool Heater Advantages • Low initial cost• Small footprint• Many Manufactures to chose from• Lots of fancy interfaces and control options• Most outdoor units stackless• Under light loads, can last a long time(i.e.
residential use)
Industry StandardLight, Residential/Commercial Duty
Typical Pool Heater Disadvantages
• Under heavy loads or long periods of use, short life span of tubes or heater (3-7 years typical)
• Non condensing designs will condense with out primary secondary loop or built in 3 way blending valve.
Industry standardLight, Residential / Commercial duty Typical Pool Heater Disadvantages• Stainless condensing section very
susceptible to corrosion with chlorines especially in salt water pools)
• Chlorine and or acid vapors in heater area will eat through .065 wall material quickly from outside in via combustion chamber.
Industrial Grade Non Condensing
INDIRECT POOL HEATERS
INDIRECT WATER HEATERS
Indirect Water Heating Advantages
• Indirect heat – no flame impingement on heat transfer area
• Furnace temp - always above dew point, even with 40 deg. F return water
• Industrial Grade heater some units like Parker - 11 gauge (.12 wall burner heat transfer area)
• Efficiencies to 86%
• Long lasting – 40 years.
• Low cost of ownership
• Indoor / Outdoor Applications
Indirect Water Heater Disadvantages• Higher initial Cost
• Longer footprint
• Limited number of manufacturers
Parker Indirect Water HeaterAtmospheric – Outdoor Schematic
Available Sizes:300 MBTUH – 3000 MBTUH
Parker Indirect HeaterWater Source Heat Pump Piping Diagram
Parker Indirect Heater Pool Piping Diagram
Commercial Productswww.commercial-
products.net
Commercial Products Corp.Heat Transfer Solutions Since 1972
QUESTIONS?