part iv conventional detectors & devices

PART IV

CONVENTIONAL DETECTORS & DEVICES

Morley-IAS Price list 2009v2

IV - Conventional Detectors and Devices

ECO1000 Series - Conventional DetectorsThe ECO1000 conventional detectors range has been produced using the latest in manufacturing technology.* Integrated local alarm LED* Integrated remote alarm output* Automatic drift compensation* 8 to 30 Vdc operating range (Fire & security solutions)* -30 to +80°C operating temperature range* Manual test by using a laser-based hand test unit

* Availability of a large range of bases

BOSEC, LPCB & VdS approved EN54

REFERENCE DetectorsUNIT PRICE

IN €

ECO1003 1W OPTICAL CONVENTIONAL DETECTOR 27,95ECO1005 1W RATE OF RISE THERMAL CONVENTIONAL DETECTOR 25,75ECO1005T 1W FIXED THERMAL CONVENTIONAL DETECTOR (58°C) 25,75ECO1004T 1W FIXED THERMAL CONVENTIONAL DETECTOR (78°C) 25,75ECO1002 1W OPTICAL/THERMAL DETECTOR 38,75

REFERENCE Conventional Bases UNIT PRICE IN €

ECO1000B 1W STANDARD MOUNTING BASE 7,55ECO1000BR 1W BASE WITH 470R RESISTOR 9,95ECO1000DB 1W DEEP BASE 9,05ECO1000DBR 1W DEEP BASE WITH 470R RESISTOR 10,95

ECO1000B 1W 12V RELAY BASE NON LATCHING 20,25REL12NL Interface for 12V systems that do not provide a reset facility.

Resets automatically the ECO detector when the fire alarm condition no longer exists.

ECO1000B 1W 12V RELAY BASE LATCHING 20,25REL12L Interface for 12V systems that latches the detector into alarm.

The detector can only be reset by removing its supply voltage.The base can be used with 4 wire security systems thathave a reset facility.

ECO1000B 1W 24V RELAY BASE LATCHING 20,25REL24L Interface for 24V system that require an external contact.

The detector stays in alarm until the removing of its supply voltage.A break-off tab allows the base to be connected to fire control panels.This tab should be broken when there is little current flow or no current limiting resistor such as when used as a 24V stand-alone system.

Conv. Detect. and Devices IV - 1 Release 2009 v2

REFERENCE Remote Indicators UNIT PRICE IN €

These items are integrated in part VII § DETECTOR ACCESSORIES Please refer to your specific discount for this chapter to define your price

IRK-2E 1W REMOTE INDICATOR LED See § VIISurface mounted with the supplied mounting box. 12,75

IRK-E-SI 1W REMOTE INDICATOR LED See § VIISurface mounted with the supplied mounting box. 13,85

IRK-W-624 1W LED TECHNOLOGY REMOTE INDICATOR IP55 6-24Vdc See § VIIreplace IRK-W-220 75,00Surface mounted


MCP Series - Manual Call pointsKAC Call Points - a range of indoor, outdoor and special environment products suitable for all applications.All products are available in a wide variety of colour and marking options.An extensive range of adaptor trays is available, allowing easy installation anywhere in the world.The MCP Call Points are compatible with standard electric embedded box with screwsFurther local territory approvals have been attained.

LPCB approved EN54-11

REFERENCE Indoor (IP24) UNIT PRICE IN €

The series red MCP is LPCB approved EN54-11The call points are delivered with the EN54-11 labels:Operating Element label: EN54-11 'dot & arrows'Function label: EN54-11 'Burning House'For other labels, please order specific foil additionally.

REDMCP1A- 1W MCP FLUSH WITH BREAK GLASS ELEMENT 13,50R470FG-01 2 outputs: Normally open (max 30Vdc)

+ monitoring resistor 470RIncludes break glass

MCP1A- 1W MCP FLUSH WITH FLEXIBLE ELEMENT 14,90R470FF-01 2 outputs: Normally open (max 30Vdc)

+ monitoring resistor 470RIncludes flexible operating element

MCP2A- 1W MCP FLUSH WITH BREAK GLASS ELEMENT & LED 20,20R470FG-01 2 outputs: Normally open (max 30Vdc)

+ monitoring resistor 470RIncludes break glass

MCP2A- 1W MCP FLUSH WITH FLEXIBLE ELEMENT & LED 21,60R470FF-01 2 outputs: Normally open (max 30Vdc)

+ monitoring resistor 470RIncludes flexible operating element

MCP3A- 1W MCP FLUSH WITH BREAK GLASS ELEMENT 16,50R000FG-01 with changeover contacts (max 30Vdc)

Includes break glass

MCP3A- 1W MCP FLUSH WITH FLEXIBLE ELEMENT 17,90R000FF-01 with changeover contacts (max 30 Vdc)

Includes flexible operating element


COLOR VERSION

x = color typeY = yellowG = greenB = blueW = white (lead time 4 weeks)

Standards labels for the NOT RED MCP are: Operating Element label: EN54-11 'dot & arrows'Function label: Plain colorFor other labels, please order specific foil additionally.

MCP3A- 1W MCP FLUSH WITH BREAK GLASS ELEMENT 21,50x000FG-11 with changeover contacts (max 30 Vdc)


MCP3A- 1W MCP FLUSH WITH FLEXIBLE ELEMENT 22,90x000FF-11 with changeover contacts (max 30 Vdc)


MCP4A- 1W MCP FLUSH WITH BREAK GLASS ELEMENT 46,00x000FG-12 with double pole changeover contacts (max 30 Vdc)


MCP4A- 1W MCP FLUSH WITH FLEXIBLE ELEMENT 47,40x000FF-12 with double pole changeover contacts (max 30 Vdc)


For Surface Mounting, please see § Mounting Boxes

REFERENCE Water Resistant (IP67) UNIT PRICE IN €

The call points are delivered with the EN54-11 labels:Operating Element label: EN54-11 'dot & arrows'Function label: EN54-11 'Burning House'For other labels, please order specific foil additionally.

RED▼▼ NEWWCP3A- 1W MCP SURFACE WITH BREAK GLASS ELEMENT 126,50R000SG-01 with single pole changeover (max 30 Vdc)

Including surface mounting box and EN54 break glass▼▼ NEWWCP3A- 1W MCP SURFACE WITH FLEXIBLE ELEMENT 128,00R000SF-01 with single pole changeover (max 30 Vdc)

Including surface mounting box and EN54 Flexible Operating Element


▼▼ NEWWCP1A- 1W MCP SURFACE WITH BREAK GLASS ELEMENT 142,50R470SG-01 Normally open (max 30 Vdc) + monitoring resistor 470R

Including surface mounting box and EN54 break glass▼▼ NEWWCP1A- 1W MCP SURFACE WITH FLEXIBLE ELEMENT 144,00R470SF-01 Normally open (max 30 Vdc) + monitoring resistor 470R


COLOR VERSION

x= color typeY = yellow B = blueG = green W = white

Standards labels for the NOT RED MCP are: Operating Element label: EN54-11 'dot & arrows'Function label: Plain colorFor other labels, please order specific foil additionally.

Y = yellow; G= Green; B = Blue; W = white▼▼ NEWWCP3A- 8W MCP SURFACE WITH BREAK GLASS ELEMENT 171,50x000SG-11 with single pole changeover (max 30 Vdc)

Including surface mounting box and EN54 break glass▼▼ NEWWCP3A- 8W MCP SURFACE WITH FLEXIBLE ELEMENT 173,00x000SF-11 with single pole changeover (max 30 Vdc)

Including surface mounting box and EN54 Flexible Operating Element▼▼ NEWWCP1A- 8W MCP SURFACE WITH BREAK GLASS ELEMENT 171,50x470SG-11 Normally open (max 30 Vdc) + monitoring resistor 470R

Including surface mounting box and EN54 break glass▼▼ NEWWCP1A- 8W MCP SURFACE WITH FLEXIBLE ELEMENT 173,00x470SF-11 Normally open (max 30 Vdc) + monitoring resistor 470R



REFERENCE Accessories UNIT PRICE IN €

These items are integrated in part VII § ACCESSORIES FOR MANUAL CALL POINTS & in part X SPARE PARTS

KG1 X 10 1W SPARE EN54 BREAK GLASS FOR ALL KAC CALL POINTS See § XPACK OF 10 16,20

PS230 1W SPARE EN54 FLEXIBLE OP. ELEMENTS FOR MCP See § XPACK OF 10 20,40

PS200 1W TRANSPARENT PROTECTIVE HINGED COVER See § VII4,23

SC070 1W PACK OF 10 SPARE TEST KEYS See § X11,54

SC071 1W PACK OF 20 TERMINAL BLOCKS See § X81,00

KL1 X 5 1W PACK OF 5 EARTH CONTINUITY LINKS See § VII4,80

▼▼ NEW See § VIIBZR2 1W RED BEZEL FOR FLUSH INSTALLATION 3,75

W Series - Switches Standards labels for the series switches are: Function label: Plain colorFor other labels, please order specific foil additionally.

x = color typeR= red G = green W = whiteY = yellow B = blue

REFERENCE Key Switches UNIT PRICE IN €

Wx9101 8W KEY SWITCH 2 POSITIONS (KEY REMOVABLE IN BOTH POSITIONS) 49,25Wx9102 8W KEY SWITCH 2 POSITIONS (KEY TRAPPED IN ONE POSITION) 52,90Wx9103 8W KEY SWITCH 3 POSITIONS (KEY REMOVABLE IN 3 POSITIONS) 53,30Wx9104 8W KEY SWITCH 36,30


REFERENCE Rocker Switches UNIT PRICE IN €

Wx9201 8W ROCKER SWITCH 2 POSITIONS 50,50double pole changeover contact

Wx9202 8W ROCKER SWITCH DOUBLE POLE ON/OFF 45,60with 220VAC red neon indicator

Wx9203 8W ROCKER SWITCH 3 POSITIONS 57,30

REFERENCE Miniature Push Switches UNIT PRICE IN €

Wx9301 8W MINIATURE SWITCH MOMENTARY ACTION, NON TERMINATED 41,30Wx9302 8W MINIATURE SWITCH MOMENTARY ACTION, TERMINATED 55,70Wx9303 8W MINIATURE SWITCH LATCHING, NON TERMINATED 34,90Wx9304 8W MINIATURE SWITCH LATCHING, TERMINATED 67,30

REFERENCE Push Switches UNIT PRICE IN €

Wx9401 8W SWITCH SINGLE POLE, MOMENTARY ACTION (250VAC/24VDC-6A) 32,40Wx9402 8W SWITCH 2 POSITIONS 94,00

Non terminated Terminated


REFERENCE Mounting Boxes UNIT PRICE IN €

x = color type, please specify!R= redY = yellowG = greenB = blueW = white

SR-P 1W SURFACE MOUNTING BOX RED 3,15Sx-P 1W SURFACE MOUNTING BOX OTHER COLOR 4,85

REFERENCE Foil of Labels for Call Points & SwitchesUNIT PRICE

IN €

These items are integrated in part VII § foil of labels for CALL POINTS & SWITCHESPlease refer to your specific discount for this chapterto define your price

Each foil contains 48 labels

MCP-LABEL F 007 1W FOIL OF 'PLAIN RED' LABELS (52,50)

MCP-LABEL F 010 1W FOIL OF 'BRAND FEU' LABELS (black on red) (52,50)

MCP-LABEL F 028 1W FOIL OF 'ALARME INCENDIE' LABELS (black on red) (52,50)

MCP-LABEL F 056 1W FOIL OF 'BRAND FEU' LABELS (black on yellow) (52,50)

MCP-LABEL F 081 1W FOIL OF 'FEU' LABELS (black on yellow) (52,50)

MCP-LABEL F 082 1W FOIL OF 'BLUSKNOP' LABELS (black on yellow) (52,50)

MCP-LABEL F 141 1W FOIL OF 'BRAND' LABELS (black on red) (52,50)

MCP-LABEL F 103 1W FOIL OF 'GASBLUSSING' LABELS (black on yellow) (52,50)

MCP-LABEL F 108 1W FOIL OF 'ALARME EVACUATION' LABELS (white on red) (52,50)

MCP-LABEL F 120 1W FOIL OF 'BRAND ALARM' LABELS (black on red) (52,50)

MCP-LABEL F 138 1W FOIL OF 'ALERTE INCENDIE' LABELS (black on red) (52,50)

MCP-LABEL F 141 1W FOIL OF 'BRAND' LABELS (black on yellow) (52,50)

MCP-LABEL F 217 1W FOIL OF 'EXTINCTION' LABELS (black on yellow) (52,50)

MCP-LABEL F 218 1W FOIL OF 'RUNNING MAN' LABELS (white on green) (52,50)

MCP-LABEL F 220 1W FOIL OF 'BIJ NOOD DEUR OPEN' LABELS (white on blue) (52,50)

MCP-LABEL F 222 1W FOIL OF 'EN54 BURNING HOUSE' LABELS (white on red) (52,50)

MCP-LABEL F 228 1W FOIL OF 'DEUR ONGRENDELING' LABELS (white on blue) (52,50)

MCP-LABEL F 235 1W FOIL OF 'ALERTE WAARSCHUWING' LABELS (black on red) (52,50)

MCP-LABEL F 244 1W FOIL OF 'UITSTEL BLUSSING' LABELS (white on blue) (52,50)


DH400 Series - DUCT DETECTORS

REFERENCE DetectorsUNIT PRICE

IN €

DH400E 1W DUCT DETECTOR HOUSING 168,0012/24VDC powered (operation range: 8,5 to 35VDC)This version contains no relays.Air velocity rating from 2,5 m/s to 20 m/sConnections for remote LED output, remote test station, remote annunciatorThe duct detector samples air passing through a duct and gives dependableperformance for shutdown of fans, blowers or air co systems, so preventing the spread of toxic smoke and fire gases through the protected area.To order separately: 2151E Smoke Detector & ST-xx Inlet Sampling Tube

DH400ACDCE 1W DUCT DETECTOR ASSEMBLY 205,0024VDC or 24VAC operationAir velocity rating from 2,5 m/s to 20 m/sEquipped with DPDT Auxiliary Relay ContactsSounder output, remote LED output, remote test station, remote annunciatorCan be used as a part of fire detection system or as a stand alone duct smokedetector which can be used to activate a sounder and shutdown fans, blowersor air co systems, so preventing the spread of toxic smoke and fire gases through the protected area.To order separately: 2151E Smoke Detector & ST-xx Inlet Sampling Tube

2151 E 1W OPTICAL CONVENTIONAL SMOKE DETECTOR 66,00For use with the duct detectors DH400E and DH400ACDCE.Note: The 2151 E detector is only available when it is ordered in

combination with the DH 400 Series Duct Detectors

REFERENCE Accessories UNIT PRICE IN €

These items are integrated in part VII § Duct Detector Accessories & part X Sparte parts

ST-1.5 1W INLET SAMPLING TUBE (LENGTH=457 MM) See § VII9,70

ST-3 1W INLET SAMPLING TUBE (LENGTH=916 MM) See § VII12,25



F-36-05-00 3W REPLACEMENT FILTER FOR DUCT DETECTORS See § X6,10

P-48-21-00 3W TUBE END PLUG FOR DUCT DETECTOR See § X▼▼ NEW on requestA-2650-01 3W COMPLETE INSTALLATION KIT FOR DUCT DETECTOR See § X

on request


6500 Series - Beam DetectorsThe 6500R is a conventional reflector- type linear optical beam smoke detector designed to operate as a component of a conventional fire alarm system. He operates primarily on the principle of light obscuration utilising an Infra-Red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses, atriums etc.The 6500R detector is a combined transmitter/receiver unit that can be directly connected to a conventional detector circuit. The Infra-Red transmitter generates a beam of light towards a high efficiency reflector. The reflector returns the beam to the receiver where an analysis of the received signal is made. Alignment of the detector is simplified with the aid of the detector’s "gunsight" targeting device. Alignment of the detector with the reflector can then be “fine tuned” with the aid of a numerical signal strength indicator.The detector incorporates automatic drift compensation, whereby the detector will adjust its detection thresholds in line with any long term signal reduction of the beam caused by contamination of the optical surface.

LPC, VdS & BOSEC Approved EN54-12:2002

REFERENCE 6500R Series Beam Detectors UNIT PRICE IN €

6500R 1W CONV. REFLECTIVE IR BEAM DETECTOR 710,00Infrared operation.Short range reflector (5M-75M) included.12VDC (security systems) or 24VDC poweredStandby Current: 17mA, Alarm Current: 38,5mAIP Rating: IP54Detector Dimension: 254mm x 190mm x 84mmReflector Dimension: 200mm x 230mm

6500RS 5w CONV. REFLECTIVE IR BEAM DETECTOR 840,00WITH SELFTEST TOOLSame as 6500R with servo motored test tool


REFERENCE 6500R Accessories UNIT PRICE IN €

These items are integrated in part VII § DETECTOR ACCESSORIES Please refer to your specific discount for this chapter to define your price

BEAM-LRK 1W LONG-RANGE REFLECTOR (75M-100M) See §VII3 reflectors with the following dimensions each: 235,00Reflector Dimension: 200mm x 230mm

BEAM-SMK 1W SURFACE MOUNTING BOX See §VIIAbsolutly needed when using the mounting Bracket kit 29,60

BEAM-MMK 1W MOUNTING BRACKET - SWIVEL TYPE See §VII165,00

BEAM-HK 1W HEATER KIT FOR 6500R See §VIITo avoid condensation problems when used 126,50 in non heated rooms.

BEAM-HKR 1W HEATER KIT FOR REFLECTOR See §VIITo avoid condensation problems when used 272,50 in non heated rooms.

▼▼ NEW See §VII6500-RTS-KEY 1W REMOTE TEST KEY SWITCH 103,00


FLAME DETECTORS

REFERENCE Basic SeriesUNIT PRICE

IN €

RIV-601/F 4W IP65 WATERPROOF IR FLAME DETECTOR 1760,0010mA stand-by, 40mA in alarm at 24VDC.Field of view is 90° cone. Remote test input.Sensitivity: 2-3% of the distance.Adjustable alarm delay: 1 to 10 sec.Output: one changeover relay contact rated 2A 250VAC,and open collector output 50mA/24VDCDimensions: 180 x 98 x 80 mm - Weight: 800gVdS approved EN 54-10 class 2 (G205044)

RIV-601/FA 4W RIV-601/F IR FLAME DETECTOR WITH EEX-PROOF ENCLOSURE 2930,00

SOR-873 4W VARIABLE DIRECTION STAND FOR RIV-601/F 285,00SOA-875 4W VARIABLE DIRECTION STAND FOR RIV-601/FA 590,00

REFERENCE MINI 20/20 SeriesUNIT PRICE

IN €

* Standard NON Eex * Multiple Detection Levels, 90°/90° Cone of Vision* Adjustable Time Delay* Stainless steel 316

▼▼ NEW20/20ML 5W UV/IR DETECTOR LOW POWERED 2165,0020/20MI-1 5W TRIPLE IR DETECTOR LOW POWERED - 10-40m - ATEX 3020,00

VdS approved (G207073))20/20MI-3 5W TRIPLE IR DETECTOR LOW POWERED - 2,5-10m - ATEX 3020,00

REFERENCE MINI 20/20 Series AccessoriesUNIT PRICE

IN €

20/20-005 5W SWIVEL MOUNT STAINLESS STEEL FOR 20/20-M SERIES 225,00▼▼ NEW20/20-787 5W AIR SHIELD FOR MINI SERIES 195,00▼▼ NEW20/20M-TOOLS 5W COMMISSIONING TOOLS KIT FOR MINI SERIES 510,00

Used for change default delay and default sensitivity


REFERENCE 40/40 SeriesUNIT PRICE

IN €

▼▼ NEW The new 40/40 Series Flame Detectorsprovide the most comprehensive protection against hydrocarbon-basedfuel and gas fires, hydroxyl andhydrogen fires, as well as metal andinorganic fires. The detectors provideearly warning of fires at long distanceswith high immunity to false alarms.

The new 40/40 series designs arethe highest performance, costeffective flame detectors currently on the market. New features include a stainless steel housing with a heated window, to eliminate condensation andicing; HART capabilities for digital communications; lower power requirements;and a compact, lightweight but highly durable and weather resistant design. The 40/40 flame detector series is highly reliable, with a newly extended 5-year warranty period and compliance with the IEC 61508 Safety Integrity requirements of SIL2. A leader in the flame and gas detection industry for over 15 years, Spectrex products are fully certified and employed around the world in a wide range of industrial and commercial facilities. the 40/40 series is standard Eexde for application in zone 1.Complies to EN54-10 (certification in pending)Complies to SIL2 (certification in pending)

40/40-U 5W UV DETECTOR 2885,0040/40-UB 5W UV DETECTOR WITH BUILT IN TEST KIT 3770,0040/40-L 5W UV/IR DUAL DETECTOR 3550,0040/40-LB 5W UV/IR DUAL DETECTOR WITH BUILT IN TEST KIT 3955,0040/40-L4 5W UV/IR (4,5µm) DUAL DETECTOR 3550,0040/40-L4B 5W UV/IR (4,5µm) DUAL DETECTOR WITH BUILT IN TEST KIT 3955,0040/40-I 5W TRIPLE IR DETECTOR 4920,0040/40-M 5W MULTI SENSOR DETECTOR 5380,0040/40-R 5W SINGLE IR DETECTOR 3430,00

REFERENCE 40/40 Series AccessoriesUNIT PRICE

IN €

40/40-001 5W TILT MOUNT FOR 40/40 FLAME DETECTORS 222,0040/40-ADD 5W CALIBRATION TO 85°C 303,5040/40-DIAG 5W HANDHELD POCKET PC DIAGNOSTICS KIT 3055,0040/40-777161 5W AIR SHIELD 212,5040/40-777163 5W STAINLESS STEEL WEATHER COVER 222,0040/40-777166 5W LASER POINTER STANDARD 915,0040/40-USB 5W USB CONNECTION CABLE FOR PC 505,00

Includes software


REFERENCE High Performance X Series Flame DetectorsUNIT PRICE

IN €

All flame detectors have the following features:* Aluminium copper free housing of stainless steel 316 version* IP66 protection* Micro controlled heated optics for increased resistance to moisture and ice. (not on X2200)* Built-in data logging/event monitoring.* MODBUS RS485 communication* Fire, fault and auxiliary relays.* Tricolor LED indicates normal operation, fire and fault * Integral wiring compartment for ease of installation* Mounting Swivel allows easy sighting.* RFI and EMC Directive Compliant* FM 3260 (2000) and ATEX Directive Compliant* For applications with high background radiation levels, such as turbine packages or off-shore facilities, the multispectral infrared X3301 is the ideal optical flame detector. * The X3302 multispectrum IR detector brings state-of-the-art flame detection to the difficult task of detecting invisible hydrogen flames.* The single frequency infrared X9800 is designed for high-pressure hydrocarbon flame detection or where high speed response and contamination resistance is critical. * The UV/IR X5200 is suited for applications such as aircraft hangars that could have UV radiation sources present. * For controlled environment applications requiring high speed response, the X2200 UV detector is the choice.

X2200A 8W UV FLAME DETECTOR X2200A4M11W2 ALUMINIUM HOUSING 5150,00Responds to all fire that emits UV radiation. It is suited where solar radiations are blind (battery rooms, high t° location, Powder coating,..)Arc-unequalled false alarm rejectionEN54-10 compliant (VdS: G203083)

X2200S 8W SAME AS X2200A BUT WITH STAINLESS STEEL HOUSING 6415,00

X2200M 8W UV MOLLY BLACK POWDER FLAME DETECTOR X2200MA4M13W2 5800,00 ALUMINIUM HOUSINGResponds to all fire that emits UV radiation. It is suited where solar radiations are blind (battery rooms, high t° location, Powder coating,..)Arc-unequalled false alarm rejectionEN54-10 compliant (VdS: G203083)

X9800A 8W IR FLAME DETECTOR X9800A4M11W2 ALUMINIUM HOUSING 5150,00Responds to radiation of hydrocarbon fires (Automotive Powder coating,Offshore platform, pipelines,..) Solar intensive.EN54-10 compliant (VdS: G203084)



X5200A 8W UV/IR FLAME DETECTOR X5200A4M11W2 ALUMINIUM HOUSING 5695,00Especially suited where hydrocarbon fires are likely and UV radiation sources may be present. (Aircraft hangars, loading racks, powder coating)EN54-10 compliant (VdS: G203085)


X3301A 8W MULTISPECTRAL IR FLAME DETECTOR X3301A4M11W2 6320,00 ALUMINIUM HOUSINGDesigned to detect hydrocarbon and not hydrocarbon fires.Alarm capabilities with modulated blackbody and other false alarm sourcespresent. Features include increased range, sensitivity, coverage and false alarm rejection. Large range of applicationsEN54-10 compliant (VdS: G202136)


X3302A 8W MULTISPECTRAL IR NON VISIBLE FIRE DETECTOR 6320,00X3302A4M11W2 ALUMINIUM HOUSINGSolar resistance - Certified performance to Hydrogen, Silone fire types.Reliable flame detection with modulated IR background.EN54-10 compliant (VdS: G202136)

X3302S 8W SAME AS X3302S BUT WITH STAINLESS STEEL HOUSING 7550,00


REFERENCE X Series AccessoriesUNIT PRICE

IN €

▼▼ NEWX-M25PG 4W M25 EEX d GLAND FOR X SERIES FLAME DETECTORS 154,00

Q9033B1000 8W MOUNTING SWIVEL STAINLESS STEEL 660,00Allows easy mounting and sighting of detector assemblies

W6300B1002 8W INSPECTOR CONNECTOR KIT 950,00For configuration of the flame detectors heads UV, IR and UV/IR.Contains: RS485/232 converter, PSU 230Vac/24Vdc, DB9 connector

Q2000A1001 8W ANTI STORM SIGHT-LEAF 360,00Q2033A10R 8W ANTI STORM SIGHT-LEAF WITH 10° LIMITER OF VISIBILITY CONE 425,00Q2033A20R 8W ANTI STORM SIGHT-LEAF WITH 20° LIMITER OF VISIBILITY CONE 425,00Q2033A30R 8W ANTI STORM SIGHT-LEAF WITH 30° LIMITER OF VISIBILITY CONE 425,00

Q1116A1001 8W STANDARD AIR SHIELD 950,00Air shields for reduced maintenance in areas where there is an abnormally high level of airborne contaminants.

Q1118A1001 8W AIR SHIELD - ALUMINIUM 1420,00Air shields for reduced maintenance in areas where there is an abnormally high level of airborne contaminants.

Q1118S1001 8W AIR SHIELD - STAINLESS STEEL 2015,00Air shields for reduced maintenance in areas where there is an abnormally high level of airborne contaminants.

001680-002 8W WINDOW CLEANER FOR FLAME DETECTOR 140,00


Aspiration Systems

REFERENCE A200 series Stand Alone Detectors UNIT PRICE IN €

The A200 series Stand Alone Aspirating Detectors is designed for the instances where the high sensitivity that is normally inherent in Aspiration detectors is an unnecessary expense or nuisance due to false alarms. The A200 series Stand Alone Aspiration Detectors will be connected to your systemby using the on-board clean contacts to raise alarm condition.* Plastic housing (IP65 optional)* Supply voltage 18-30VDC -* One or two Fire relays (depend type)* One or two Fault relays (depend type)* IP50 rating (IP65 optional)

VdS Approved EN54-20 (G206067)

▼▼ NEWA211E-LSR 1W STAND ALONE ASPIRATING SYSTEM 1 CHANNEL (MAX 75M) 2.310,00

Completed with 1 laser Detector▼▼ NEWA222E-LSR 1W STAND ALONE ASPIRATING SYSTEM 2 CHANNELS (MAX 2 X 50M) 2.885,00

Completed with 2 laser detectorsMax. sampling pipe length 100m1 Sampling Air Inlet Ø 25 mm

REFERENCE Sampling Pipes, Fittings & Accessories UNIT PRICE IN €

These items are integrated in part V § INTELLIGENT DETECTORS Please refer to your specific discount for this chapter to define your price

See §V02-FLU2 4W EXTERNAL FILTER FOR VERY HARSH ENVIRONMENT 546,00

Horizontal mounting, 2 inlets 25mmSee §V

02-WT-01 4W EXTERNAL WATER TRAP KIT 300,00traps the water co

See §V02-WT- 4W EXTERNAL WATER TRAP HEATER KIT 975,00HEAT-01 Heats the air flow

See §VPFIL-EXT 6W EXTERNAL FILTER FOR VERY HARSH ENVIRONMENT 399,00

Vertical mounting


See §VABS 010 WARNING LABELS FOR CAPILARY SAMPLING POINT 30,30

ROLL OF 100 PIECESSee §V

ABS 011 1W CEMENT 250ml 21,20See §V

ABS 001/25 1W 90° SWEEPING BEND DIAMETER 25MM RED 102,00PACK OF 10 See §V

ABS 001 2W WHITE VERSION OF ABS 001/25 111,00/25-WH PACK OF 10

See §VABS 002/25 1W 45° SWEEPING BEND DIAMETER 25MM 47,40

PACK OF 10 See §VABS 002 2W WHITE VERSION OF ABS 002/25 50,00/25-WH PACK OF 10

See §VABS 003/25 1W SOCKET UNION DIAMETER 25 MM 135,50


See §VABS 004 1W PIPE CLIPS - RED 16,10

PACK OF 10 See §VABS 004-WH 1W WHITE VERSION OF ABS 004 17,50

PACK OF 10See §V

ABS 005/25 1W JOINTING SOCKET DIAMETER 25 MM 22,70PACK OF 10 See §V

ABS 005 2W WHITE VERSION OF ABS 005/25 24,15/25-WH PACK OF 10

See §VABS 005/1 1W 25MM TO 27MM ADAPTER 22,70

PACK OF 10 See §VABS 005 2W WHITE VERSION OF ABS 005-1 111,00/1-WH PACK OF 10

See §VABS 006/25 1W T' PIECE DIAMETER 25MM 121,00


See §VABS 007/25 1W END CAP DIAMETER 25MM 22,70


See §VABS 008/25 1W PIPE DIAMETER 25 MM - 3 METRES LONG 158,00



REFERENCE Remote Sampling Point AssembliesUNIT PRICE

IN €

See §VABS 019C 1W CAPILLARY SAMPLING POINT- CONICAL HEAD 41,50/25 TO CONNECT ON A ABS 008/25 PIPE

Includes T-piece, 2 mtrs capillary tube & sampling point See §VABS 019C 2W WHITE VERSION OF ABS 019C/25 45,00/25-WH

See §VABS 019F/25 1W CAPILLARY SAMPLING POINT-FLUSH DISC 41,50

TO CONNECT ON A ABS 008/25 PIPEIncludes T-piece, 2 mtrs capillary tube & sampling point See §V

ABS 019F 2W WHITE VERSION OF ABS 019F/25 45,00/25-WH

See §VABS 020/25 1W CAPILLARY SAMPLING POINT- DISCRETE SAMPLING POINT 8MM 36,00

TO CONNECT ON A ABS 008/25 PIPEIncludes T-piece, 2 mtrs capillary tube & sampling point See §V

ABS 020 2W WHITE VERSION OF ABS 020/25 39,50/25-WH

See §VABS 019C 1W CAPILLARY END CAP SAMPLING POINT- CONICAL HEAD 36,00/25EC TO CONNECT ON A ABS 008/25 PIPE

Includes end cap reduction, 2 mtrs capillary tube & sampling point See §VABS 019C 2W WHITE VERSION OF ABS 019C/25EC 39,50/25EC-WH

See §VABS 019F 1W CAPILLARY END CAP SAMPLING POINT-FLUSH DISC 36,00/25EC TO CONNECT ON A ABS 008/25 PIPE

Includes end cap T-piece, 2 mtrs capillary tube & sampling point See §VABS 019F 2W WHITE VERSION OF ABS 019F/25EC 39,50/25EC-WH

See §VABS 020 1W CAPILLARY END CAP SAMPLING POINT- DISCRETE SAMPLING 30,30/25EC POINT 8MM TO CONNECT ON A ABS 008/25 PIPE

Includes end cap T-piece, 2 mtrs capillary tube & sampling point See §VABS 020 2W WHITE VERSION OF ABS 020/25EC 34,00/25EC-WH


REFERENCE ComponentsUNIT PRICE

IN €

See §VCAP-RED 1W 10mm NYLON TUBE - RED (per metre) 4,20

See §VCAP-WHITE 1W 10mm NYLON TUBE - WHITE (per metre) 5,00

See §VABS 021/25 1W CAPILLARY END CAP FOR ABS 008/25 PIPE 16,50

Reduces 25 m pipe to 10mm pipe See §VABS 021 2W WHITE VERSION OF ABS 021/25 20,00/25-WH

See §VABS 022/25 1W CAPILLARY T PIECE FOR ABS 008/25 PIPE 24,85

Reduces 25 mm pipe to 10mm pipe See §VABS 022 2W WHITE VERSION OF ABS 022/25 27,50/25-WH


part iv conventional detectors & devices

Documents