part l - energy efficient - gas training courses at kier · gas training at kier, d block, harvey...
TRANSCRIPT
Part L – Energy Efficiency
The Part L qualification is designed for central heating installers that need to self-certificate their work via one of the Competent Persons Schemes (CPS). The course covers the requirements of Part L of the Building Regulations.
The qualification normally takes one-day to complete and is assessed by a short multi-choice theory examination and is normally valid for 5 years.
Pre-requisites Applicants should be experienced installers of gas, oil, or solid fuel domestic central heating systems.
Candidates must bring with them:
• All previous original certification
• 2 passport size photographs
• National Insurance Number
• Photographic ID e.g driving licence or Passport
• Please note policy on re-sits: there is no charge to re-sit any part of your assessment should you fail. Limited to one assessment per person.
Payment
Full payment required upon attendance.
Course Content
E: [email protected] T: +44 (0)191 643 2233
Gas Training at Kier, D Block, Harvey Combe, Killingworth, Newcastle upon Tyne, NE12 6UB
Duration1 day
Including:
• Understand the regulatory requirements and
sources of guidance for energy efficiency standards
for gas-fired and oil-firedheating appliances
connected to ‘wet’ heating circuits
• Be able to determine if a non-condensing boiler
installation would be acceptable
• Recognise the requirement relating to space
heating primary circuits type and design for
gas-fired and oil-fired ‘wet’ heating systems
• Appreciate the compliance standards requirement
for hot water storage vessels
• Understand the requirements relating to the
preparation and water treatment of hot water
systems and wet central heating systems
• Understand the requirements relating to the
commissioning of hot water systems and wet central
heating systems
• Know the requirements of the minimum standards for
the control of gas-fired and oil-fired wet central heating
systems
• Know the requirements of the minimum standards for
the control of insulation of pipework for gas-fired and
oil-fired wetcentral heating and hot water storage
systems
• Know the requirements relating to standalone,
glandless heating system circulators.
LocationNorth Tyneside
CertificationBPEC Part L – Energy Efficiency
Next Start Date Please contact us to check the next available courses
PaymentFull payment required upon attendance.
Price£180.00 + VAT plus certificate costs