part numbers and images other addent products … · 2015. 12. 16. · q. can composite be left in...
TRANSCRIPT
C O M P O S I T E W A R M E R
Dr. Paul Belvedere says:The contemporary heavy bodied materials which are more di�cult to express at room temperature become very user friendly with the Calset.
Dr. Douglas Terry says:As the search for an ideal composite continues, an additional variable has been introduced to direct resin technology- elevated temperature. Elevated temperature in direct placement of composite resin with such instruments as the Calset heater enhances the sculptability and the ease of placement of the composite while also providing an increased conversion and decreased light exposure time for the resin.
Dr. Frederick A. Rueggeberg says:The pre-heating of composite, such as with the Calset, provides signi�cant increase in composite cure and lowers paste viscosity allowing for enhanced composite �ow over using the material at room temperature.
AdDent, Inc.43 Miry Brook Road Danbury, CT 06810
(203) 778 0200 (203) 792 2275www.AdDent.com [email protected]
P/N
660
024
7/2
010
OTHER ADDENT PRODUCTS
RITE-LITE ™
L.E.D Shade Matching LightPIN 110047
MICROLUX ™
Fiber-optic mirrorattachmentPIN 110045
TRIMAX™
Composite InstrumentPIN 110001
MICROLUX/DL™ Kitwith 6 bottles of solutionPIN 110035
MICROLUX ™
TransilluminatorPIN 110019
CoMax™
Composite DispenserPIN 120000
PowerBrite™
Su�cient for 16 teethPIN 111011
PART NUMBERS AND IMAGESThe following dispenser guns can be used with the part numbers assigned.
110007-12
CoMax
Caulk
Kerr (Original Model)
Clinician’s Choice
110007-02
Centrix Venus
Kuraray Vident
110007-06
110007-07
Centrix Nu-Gun Vivadent
CALSET Composite Heater
™
CALSET™ with Tri-TrayAccepts dispenser gun,2 finishing instruments for heating and 3 compules
Syringe Composite TrayCALSET™ with 7 Hole
CALSET™ with Standard Tray
CALSET™ with Dispenser Gun Tray
BENEFITS
• 3 temperature Calset heats to : 98˚F (37˚C),130°F (54°F) and 155°F (68°C)
• Increases depth of cure, makes composite easier to extrude and better adapt to cavity walls
• Improves composite flow by 68%, and shortens curing time by over 50%
• Reduces Microleakage
• Improves physical properties
• Quickly loads compules with CoMax Gun
• Heats composite instruments for improved marginal adaptation
CALSET’s™ are available 100Volts, 120Volts, 230Volts and 240Volts.Visit www.AdDent.com for more information.
Anesthetic Tray Veneer Tray
• Anesthetic injected at body temperature is more comfortable for the patient (research references can be found on our website)
• Veneer tray allows cementation using warm composite
CALSET ™ FAQ
ACCESSORY TRAYS
Q. What temperature should I use to heat composite? A. Composite should be warmed to 155˚F. Depress the on button 3 times. The red blinking LED will remain solid when the temperature is reached.
Q. What effect does heat treatment with Calset have on polymerization shrinkage? A. All composites shrink in the course of polymerization to a maximum based on their properties. Heat gets the material to reach maximum polymerization with lower light levels and in less time.
Q. Can composite be left in the Calset all day? A. Yes
Q. How long does it take to warm the composite? A. Initially it takes 14 minutes to warm the unit. It takes 3 minutes to warm composite.
Q. Why should I use warmed composite instead of flowable? A. Studies show reduction in microleakage, reduced stress and greater depth of cure.
Q. Does heating composite damage the pulp? A. No. There is no danger to the pulp.
CALSET™ for Composite Compules
110007 Calset Composite Heater, 120 Volts AC with Standard Composite Compule Tray
110007-12 Calset Tri-Tray Composite Heater, 120V with dispenser tray for use with AdDent’s CoMax, Caulk, Kerr (original model) and Clinician’s Choice
110007-02 Calset Composite Heater, 120 Volts AC with Dispenser Tray for use with Centrix, Venus, Kerr (newer model) 3M, Centrix E/Z and GC Unitip Applier Guns
CALSET™ for Syringed Composites
110040 Calset Composite Heater, 120 Volts AC with Composite Syringe Tray (Holds 7 syringes of composite)
CALSET™ Tray Accessories
600003 Standard Composite Compule Tray only
600047 Dispenser Tray - For use with Centrix, 3M, Venus and Kerr (newer model) dispensers
600067 Dispenser Tri-Tray - For use with AdDent CoMax, Caulk, Kerr (original model) and Compu Ject Guns
600019 Bleaching Tray, Only (For use with Niveous Bleach by Shofu)
600064 Syringe Tray (Holds 7 syringes of composite)
600059 Anesthetic Tray (Holds 3 carpules)
600066 Porcelain Veneer Tray
See our website for research references at www.AdDent.com