parts needed for assembly using method #609

208 Lattice perforated grille

Snap-in catch(lower)

Snap-in strike(upper)

Shim

Screw(not provided)

Disclaimer:This step by step layout is one of the many ways someone can install their custom grilleusing method #609

Parts needed for assembly using method #609

Architectural Grille

REV

SHEET

-A3

SIZE

SCALE

42 Second AvenueBrooklyn, NY 11215www.archgrille.com

DESCRIPTION

CUSTOMER Drawn byHeg

#609 Method of fastening 1"=1" DMS.609.1

A

DETAIL ASCALE 2 : 1.25

STEP 1:Anchor the snap-in catches(lower) into the opening using screws at required distance.

DMS.609.21"=1.25"#609 Method of fastening

HegDrawn byCUSTOMER

DESCRIPTION


SCALE

SIZE

A3 -

SHEET

REV


STEP 2:Snap-in catches(lower) attached into the opening at required distance using screws.


HegDrawn byCUSTOMER

DESCRIPTION


SCALE

SIZE

A3 -

SHEET

REV


STEP 3:Shim's welded to the 208 lattice perforated grille and snap-in strikes(upper) attached to the shim's using screws at required distance.Shims and screw are welded in the snaps, for fine adjustments.The above steps are done in factory before reaching customer place.


HegDrawn byCUSTOMER

DESCRIPTION


SCALE

SIZE

A3 -

SHEET

REV


STEP 4:Attach the 208 lattice perforated grille to snap-in catches(lower) by lowering snap-in strikes(upper) into snap-in catches(lower).


HegDrawn byCUSTOMER

DESCRIPTION


SCALE

SIZE

A3 -

SHEET

REV


STEP 5:208 lattice perforated grille attached to snap-in catches(lower) by lowering snap-in strikes(upper) into snap-in catches(lower).

Installation complete.


HegDrawn byCUSTOMER

DESCRIPTION


SCALE

SIZE

A3 -

SHEET

REV


parts needed for assembly using method #609

Documents