parts to bring to rqbs these are removed from last year’s robot
DESCRIPTION
cRIO with all modules & connectors and cables for each module. Digital sidecar with all connectors and cables. Panel signal light indicator & connector. Classmate computer, charger and USB joysticks. 25’ Cat5 cable. Fuse – breaker panel. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Parts to Bring to RQBS These are removed from last year’s robot](https://reader036.vdocument.in/reader036/viewer/2022083006/568139e9550346895da1a170/html5/thumbnails/1.jpg)
cRIO with all modules & connectors and cables for each module. Digital sidecar with all connectors and cables. Panel signal light indicator & connector. Classmate computer, charger and USB joysticks. 25’ Cat5 cable. Fuse – breaker panel.
Parts to Bring to RQBSThese are removed from last year’s robot
cRIO, with all modules
Panel Light
Joysticks
120 amp Breaker
Fuse-Breaker Panel
Digital sidecar
![Page 2: Parts to Bring to RQBS These are removed from last year’s robot](https://reader036.vdocument.in/reader036/viewer/2022083006/568139e9550346895da1a170/html5/thumbnails/2.jpg)
Tools to Bring
Frame Team: 3/16” allen wrenches (2), preferably a T-handle,
screwdriver type, or loop/wire handle for fast turning Cordless drill w/ 3/16” allen wrench bit is a plus ! 7/16” combination wrench Pliers Hammer Tape measure Marking pencil/pen/marker Flat head and Phillips screwdrivers Chain break for 3/8” chain (Note: teams can borrow this
from another team if needed)
![Page 3: Parts to Bring to RQBS These are removed from last year’s robot](https://reader036.vdocument.in/reader036/viewer/2022083006/568139e9550346895da1a170/html5/thumbnails/3.jpg)
Tools to Bring
Electronics Team: Wire strippers Wire cutters Wire crimpers – a good set with handles at least 7” long Phillips screwdriver ( #2) Flat Screwdriver Wago flat screwdriver (supplied in FIRST kit) 3/8” combination wrench 10mm combination wrench Tape measure 7/16” combination wrench Cordless drill small drill bit set up to 3/8”