passive house report

26
Project: Green Passive House Martín Amado Pousa

Upload: martin-amado

Post on 25-Jan-2015

67 views

Category:

Design


0 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Passive house report

Project: Green Passive House

Martín Amado Pousa

Page 2: Passive house report

Project description:

The house is designed based on each of the guidelines of the passive

houses. Focused on combining the orientation of the different rooms with

the use of natural light.

This house is designed for a possible family with two children. I design

house where day area is placed on the ground floor and night area is

placed on the first floor.

In the second floor, the gross area is reduced creating a terrace

therefore sunlight can be introduced into the bathroom on the first floor.

First skect

Page 3: Passive house report
Page 4: Passive house report
Page 5: Passive house report
Page 6: Passive house report
Page 7: Passive house report
Page 8: Passive house report
Page 9: Passive house report
Page 10: Passive house report
Page 11: Passive house report
Page 12: Passive house report
Page 13: Passive house report
Page 14: Passive house report
Page 15: Passive house report

Project particularities description:

Passive solutions in summer

We have designed a greenhouse in the South side of the house to take

advantage of solar radiation in winter heating the South wall. This heat

goes into the house at night by heat conduction. To get an appropriate

transfer I have designed a heavy external wall to be a high thermal

inertia and high thermal impedance.

Passive solutions in winter

We have designed a light cover with automatic control on the

greenhouse to create shadings in summer over South wall.

I have designed a chimney to generate cross ventilation in summer.

Sunlight enters into the bathroom on the ground floor trough the shaft.

The shaft is used to goes up the installations too.

Page 16: Passive house report
Page 17: Passive house report
Page 18: Passive house report

Project summary:

Construction type

I have design a heavy construction with load-bearing walls. External

walls are composed by "in situ" concrete, insulation and brick masonry.

These walls conduce its weight to a continuous foundation structure.

External wall and roof detail on the South

Page 19: Passive house report

- External wall and roof detail on the North

Page 20: Passive house report

- Ground floor and external wall detail

Page 21: Passive house report

Mechanical services employed

I select a compact heat pump system.

Page 22: Passive house report

To improve the efficiency of the compact heat pump I have planned

6,00 m² solar thermal panels on the roof. The 68% of total annual heating

load DHW production is produced by the solar thermal panels.

To reduce the electricity consumption I have planned 20,00 m²

photovoltaic cells. Primary energy demand is 70 kWh/m² )and the

specific primary energy reduction trough solar electricity is

47 kWh/m² a. Therefore, savings is 67%.

Page 23: Passive house report

Outside pictures:

South-East side views

Page 24: Passive house report

Outside pictures:

South side elevation

South-West side view

Page 25: Passive house report

Outside pictures:

Final South-East view

Final North-East side view

Page 26: Passive house report

Inside pictures:

Stairs on the North side of the house