pdf curriculum vitae for matthew lawson
TRANSCRIPT
![Page 1: pdf CURRICULUM VITAE FOR MATTHEW LAWSON](https://reader037.vdocument.in/reader037/viewer/2022100105/58e966471a28abb45f8b636b/html5/thumbnails/1.jpg)
CURRICULUM VITAE
AC - Alternating current. Acceleration stress - Additional stress imposed by an
EXPERIENCE & SKILLS
Mining & Civil Works
Construction & Maintenance Rigging 10+ Years
Crane Operations 5+ Years Various Leading Hand Roles
Vast Heavy/Complex Lift Experience Extensive Use Of EWP’S, Forklifts & Telehandlers
Ability To Operate In Extreme Weather Accomplished Roadtrain Operator 15+ Years
High Mechanical Aptitude Proficient On Various Tools
Articulate Communication & Interpersonal Practices
ATTRIBUTES
Safety Focused Fit & Drug Free
Competent Patient
Alert Independent
Honest Confident
Attentive Capable
Industrious Productive Resourceful
Versatile Dependable Co-Operative
Accurate Broad Minded
Analytical Efficient
Adaptable Consistent
Persevering Practical
LICENCES
& ACREDITATIONS
Rope Access IRATA 1
Advanced Rigging BOSIET MSIC
Working @ Heights Confined Spaces
Gas Test Atmospheres WA White Card
Elevated Work Platform Open Crane Telehandler
Forklift Multi Combination
Car Bike
POST: PO Box 114, Bunbury, WA, 6233 MOB: 0410 498 983 E-MAIL: [email protected]
Michael Mageropoulos Level 3/Leading Hand
Pilbara Access
0455 047 414
Mike Ashton
Construction Manager Brookfield Multiplex
+44 7799 716 603
Willem Fouche
Level 2/Leading Hand Mak Max Australia
Jade Drane
Level 3/Leading Hand Pilbara Access 0408 818 301
Phillip Tylor
Supervisor RCR Resorces 0458 451 439
![Page 2: pdf CURRICULUM VITAE FOR MATTHEW LAWSON](https://reader037.vdocument.in/reader037/viewer/2022100105/58e966471a28abb45f8b636b/html5/thumbnails/2.jpg)
CURRICULUM VITAE
WORK HISTORY
Rope Access Lvl1 Rigger · Mak Max Australia Perth, WA August 2016 – Current
― Employed as an Advanced ringer for the installation of fabric roof panels for the new Perth stadium. ― Duties as a leading hand include, but not limited to, organizing ground and store personnel, cranage for the days tasks, fabric
preparataion prior to installation, rigging and rope access setups, inspections and registering of all rigging and rope access equipment and to oversee the operations of the tooling and equipment stores.
Rope Access Lvl1 Rigger · Tasman Rope Access Perth, WA June 2016 – August 2016
― Employed as an Advanced rigger for shutdowns, maintenance and overhauls on multiple sites throughout Western Australia. ― Preform rigging operations using cranes, chain/lever blocks and any rigging setups as required per job scope ― Assist other trades and personnel where required.
Rope Access Lvl1 Rigger · Pilbara Access Perth, WA May 2016 – August 2016
― Employed as an Advanced rigger for shutdowns, maintenance and overhauls on multiple sites throughout Western Australia. ― Preform rigging operations chain/lever blocks, rope winches/pulleys and any rigging setups as required per job scope ― Assist other trades and personnel where required.
Rigger/Operator · RCR Resources Bunbury, WA Sept 2015 – May 2016
― Employed as an Advanced rigger for Apron feeder repairs, maintenance and overhauls on multiple sites throughout Western Australia. ― Preform rigging operations using cranes, chain/lever blocks and any rigging setups as required per job scope ― Perform the safe operations of any cranes, Light/Heavy vehicles, tele handlers and forklifts when required
Rigger/Operator · LGM Industries Bunbury, WA Aug 2015 - Sept 2015
― Rigging at Worsley Alumina, replacing panels and springs on ESP 1 Shutdown.
Rigger/Operator · G&S Engineering Roy Hill, WA Jan 2015 - July 2015
― Employed for the construction of the Stacker and Reclaimer units at Roy Hill ― Health and Safety Rep, and Leading Hand (Section 44 completed) ― Perform the safe operation of EWP, Franna, Rough Terrain and Crawler Cranes ― Performed general, complex and critical lifts ― Assisted with the coordination of day to day duties
Rigger/Operator · Freo Group LTD Newman, WA May 2011 - Dec 2014
― Served as a Road Train Operator and crew member for all 50 to 500t crane mobilisations ― Perform the safe operation of Franna and Slew Cranes ― Performed general and dual crane lifts such as dumpy tubs, digger builds and substation transformers ― Assisted with the coordination of Lift studies ― Works performed for shutdowns and breakdowns as well as providing labour hire to BHP
Rigger/Driver · Hanchard Crane Hire Brisbane, QLD Nov 2010 - May 2011
― Administered dogging and rigging operations for general crane hire ― Set up and mobilised cranes and transported the counterweights and equipment on semitrailers ― Performed general yard duties and demonstrated ability to work at heights
Rigger/Driver · Siteforce Australia Cairns, QLD Mar 2010 - Nov 2010
Georgetown Gold Project QLD, Aug - Nov 2010 ― Restored gold processing plant which had been dormant for approximately 15 years
Duketon Gold Mine Project WA, Mar - Aug 2010 ― Served a key role in the scratch build operation of a gold mine situated 180 km north of Laverton, WA ― Leeched tanks and platforms, conveyor structures, and other various towers and structures ― Administered the pinning, security, fitting, measurement and modification of structural beams, as well as installation and relocation of
static lines
![Page 3: pdf CURRICULUM VITAE FOR MATTHEW LAWSON](https://reader037.vdocument.in/reader037/viewer/2022100105/58e966471a28abb45f8b636b/html5/thumbnails/3.jpg)
CURRICULUM VITAE
― Utilised chain blocks, winches and cranes whilst ensuring proper maintenance of all equipment ― Demonstrated ability to work at heights and to work in extreme temperature conditions (-5 to 50⁰C+ with very little to zero humidity) ― Served as a Road Train/Truck Driver responsible for the pick-up and delivery of hire equipment
Rigger/Driver · J&K Transport Brisbane, QLD May 2009 - Mar 2010
― Operated Floats, B-Doubles or road trains transporting cranes all over QLD, NT and WA ― Collected delivery instructions from appropriate sources, verifying instructions and routes ― Performed vehicle maintenance tasks such as adding oil, fuel, or radiator fluid or performing mechanical repairs
Rigger/Driver · Siteforce Australia Cairns, QLD Nov 2008 - May 2009
― Worked on the ERA Range Mine project located in Kakadu National Park, NT ― Modified key structural components of the water treatment plant through installation of larger beams and other modifications ― Administered a wide variety of functions including static line installation and relocation; top level grid mesh installation; reinstallation
of modified sludge tanks; installation of cradles for motors and impellers; and performing work on lime contact tanks ― Performed other duties very similar to the Duketon Gold Mine Project
Rigger/Driver · Hanchard Crane Hire Brisbane, QLD Nov 2006 – Nov 2008
― Administered dogging and rigging operations for general crane hire ― Set up and mobilised cranes and transported the counterweights and equipment on semitrailers ― Performed general yard duties and demonstrated ability to work at heights
Rigger/Driver · Various Recruitment Agencies Brisbane, QLD May 2004 - Nov 2006
― Carried out both local and interstate pick-ups and deliveries ― Performed several types of work including refrigerated, general, container, steel and timber deliveries (both warehouse and site
deliveries) ― Performed various general rigging jobs, construction and shutdown work
Operations Manager/Driver/Dogman · Fassifern Freighters Brisbane, QLD Feb 2001 - May 2004
― Carried out interstate to local deliveries of general goods, containers and oversize or dangerous goods using fridge vans, express vehicles, road trains, B-doubles and singles
― Progressed through the company to obtain the responsibility of operating the fleet ― Administered maintenance scheduling and organised repairs for unexpected breakdowns, ensuring compliance with transport and
OH&S safety regulations ― Performed customer liaison, job costing, investigations, and shift scheduling in the event of employee shortages
Earthmover Tyre Fitter · Marathon Tyres Emerald, Mackay & Sydney Feb 1996 - Feb 2001
― Served as a relief fitter carrying out work at Cadia Hill Gold Mine, in addition to Mt Thorley in the Hunter Valley to work on various coal mines
― Used truck-mounted tyre handlers and various hydraulic/pneumatic tools and attachments ― Transferred to Emerald and Mackay to continue fitting earthmover tyres ― Served as on site tyre fitter for both trucks and earthmovers ― Obtained Heavy Rigid Licence