digest changes and updates - 2015 - schneider...

1© 2012 Schneider ElectricAll Rights Reserved

Digest Changes and Updates - 2015

Digest 176 Sections Revised through March 2015

Click here for links to Digest 176 product line sections revised or updated since printing in March, 2012. Included are changes related to new products, revised pricing, technical corrections, and more. These sections contain the most accurate, up-to-date information available. They may also reflect new features, expanded product lines, and globalization efforts.The following sections have been updated:

Digest 176Section 1: Load CentersSection 2: MeteringSection 3: Safety SwitchesSection 4: Power Monitoring & ControlSection 5: Lighting Control and Integrated Home SystemsSection 6: Surge Protective DevicesSection 7: Circuit BreakersSection 8: Operator Mechanisms and Disconnect SwitchesSection 9: PanelboardsSection 12: BuswaySection 14: TransformersSection 15: Medical ProductsSection 16: NEMA Contactors and StartersSection 18: IEC Contactors and StartersSection 19: Push Buttons & Operator InterfaceSection 23: Relays and TimersSection 24: Terminal Blocks

Supplemental and Obsolescence Digest 176

2 © 2012 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

Digest 176 Section Revision Log

Revised through March 2015

Section 1: Load Centers

Section 2: Metering

Section 3: Safety Switches

Section Number Page Number Reason for Change Specific Changes Made Change Date

1 1-1 Revision Added Solar Ready CSED 1-24 and moved New! Icon next to it. July-12

1 1-2 RevisionTable 1.1: Under 22 k AIR header, added Catalog Nos. & Prices for 40 A thru 70 A rows: QO140VH $73.00, QO150VH $73.00, QO160VH $73.00 & QO170VH $112.00 respectively.

July-13

1 1-3 Revision

Deleted photo 1P QO-AFI and added 1P QO-CAFI & 1P QO-D photos. Table 1.6: Changed Combination Arc-fault Interrupter to Combination Arc-fault Interrupter (Pigtail Neutral) and added 2 rows for Plug-on Neutral Combination Arc-fault Interrupter. NOTE: OTHER INFO ADDED but had to go to new page at the end of the section because it would not fit.Changed 1P QO-CAFI photo that was wrong. Added 1P QO-DF photo. Table 1.6: Added a ruled line under Combo Arc-Fault Interrupter, rating 15. Added "New!" Icon and (Pigtail and Plug-On Neutral) to the QO Arc-Fault Circuit Breaker heading.Changed note about overflow page reference.

Mar-14

1 1-3 RevisionTable 1.6: Added footnote with rest at bottom of page: "For 120/240 V only, not for 208Y/120 V. Then added corresponding symbol (hollow triangle) to cat nos. QO215CAFI, QO215VHCAFI, QO220CAFI & QO220VHCAFI.

July-14

1 1-4 Revision

Table 1.14: Padlocking in OFF position row; changed last line to: For padlocking 1P QO-GFI, QO-CAFI, QO-DF and QO-EPD circuit breakers in OFF position only, fixed attachment. For padlocking 2P QO-GFI, QO-CAFI and QO-EPD circuit breakers in OFF position only, fixed attachment.

May-14

1 1-14 Revision

NEW Table Added after 1.38 for HOM-DF. Replaced photo HOM 1P AFI with HOM 1P CAFI and Added photo HOM 1P D.Table 1.38: fixed typo in table caption: HOM-AFI to HOM-CAFI. Changed HOM 1P DF photo.

Mar-14

1 1-14 Revision Table 1.38: replaced table with 1 and 2 pole info. Table 1.39: Replaced. May-14

1 1-14 RevisionTable 1.38: Added footnote with rest at bottom of page: "For 120/240 V only, not for 208Y/120 V. Then added corresponding symbol (hollow star) to cat nos.HOM215CAFI & HOM220CAFI.

July-14

1 1-4 Pricing Correction Table 1-45 - Changed price for HOMELEC1PA from $9.90 to $48.00; changed price for HOMELEC2PALA from $9.90 to $84.00 Oct-14

1 1-23 Correction Changed SC2442M200S,SH to QC2442M200S,SH July-12

1 1-25 Revision Table 1.66: Changed table header from 10 kA to 22 kA. Added to table subhead "QOVH" in 2 places. Mar-12

1 1-27 New Page Removed String Combiner Boxes from header.Added New icon. Added New table for QO Arc Fault Circuit Breakers. Oct-12

1 1-27 Revision

Table 1.72: Updated prices and added Outdoor Section.first sentence: changed typo from connectio non to connection on. Table 1.73: Change table caption from (accepts QO only QO Circuit Breakers) to (accepts QO Circuit Breakers only)

Mar-14

1 1-27 Revision Moved QO-K and corresponding table from Page 1-3 to make room for QO Dual Function from page 1-27. May-14


2 2-10 Revision Added new footnote: Top Feed Only. AND added corresponding symbol to EZM11200GCBT, EZM11200JCBT, EZM11200FST July-12

2 2-10 Revision In Tables 2.13 and 2.14, column "Horizontal Cross Bus Rating and Bus Bar Material", changed all "1200 A Cu" values to "1200 A Al". Oct-14

2 2-12 Revision In Tables 2.18 and 2.19, column "Horizontal Cross Bus Rating and Bus Bar Material", changed all "1200 A Cu" values to "1200 A Al". Oct-14

2 2-13 Revision In Table 2.20, column "Horizontal Cross Bus Rating and Bus Bar Material", changed all "800 A Cu" values to "800 A Al". Oct-14

2 2-14 Revision In Table 2.23, column "Horizontal Cross Bus Rating", changed all 1200 A Al/Cu" values to "1200 A Al". Oct-14


3 3-2 Revision

Table 3.2: 4 Wire Section, Added open square footnote to first 600 listing. Table 3.3: Added Foot note symbols to both lines of 400A Cart switches corresponding with the following new footnote: To accept J class fuses, move fuse bases to the embossed guide inside of the switch.

July-12

3 3-4 RevisionTable 3.9: Removed Diamond Footnote Symbol from Horsepower Rating header and corresponding footnote under table. On star footnote added th e word outside between two & switching.

Mar-14

3 3-5 Revision

Table 3.10: Removed Diamond Footnote Symbol from Horsepower Rating header and corresponding footnote under table. On star footnote added th e word outside between two & switching. Replaced upside down triangle text to say: For switching dc use two outside switching poles. Table 3.13: Removed Rows containing KA & KH.

Mar-14

3 3-6 Revision Table 3.13: deleted both 600 rows. July-12

3 3-6 Revision

Changed footnote under table 3.11 from ”Check series number on switch for correct accessory. See page 3-14.” to “Requires 60A accessories. See page 3-14 for series rating.Changed footnote under table 3.11 from “HU401AWK (Series E1) is rated 5 hp@50 Vdc, 10 hp@ 600Vdc.” to “HU401AWK (Series F6) is rated 5 hp@50 Vdc, 10 hp@ 600Vdc.”

Dec-12

3 3-6 Revision

Table 3.11: Removed Diamond Footnote Symbol from Horsepower Rating header and corresponding footnote under table. On star footnote added th e word outside between two & switching. Replaced upside down triangle text to say: For switching dc use two outside switching poles.

Mar-14

3 3-7 correction

Table 3.14: changed 4 prices: Under Fusible 400 & 600 Amp Prices. Under Non-Fusible 400 & 600 Amp Prices. Table 3.17: Added corresponding foot note symbol to H225XJG and H225XJGAA. NEW Foot note: Not UL listed or CSA Certified due to wire bending space.

July-12

3 3-7 Revision Under heading NEMA 7 and 9: Changed UL Listed to cULus Listed. Deleted and CCA Certified. July-13

© 2012 Schneider ElectricAll Rights Reserved

3


Section 4: Power Monitoring & Control

3 3-7 Revision

Table 3.14: removed info under 480 Vac & 600 Vac on bottom 2 rows. Table 3.15: Removed Diamond footnote symbol in header. Changed 1 NO/1 NC Contact to 1 NO/1 NC Contacts. Removed Star footnote symbols in both 200 Ampere Rows. Table 3.16: Removed Diamond footnote symbol in header. Table 3.7; Changed table caption from 3P, Non-Fusible, 600 Vac, 250 Vdc Maximum, Short Circuit Rating 10 kA AIR to 3 Pole Molded Case Switch, , 600 Vac, 250 Vdc Maximum, Short Circuit Current Rating 10 kA AIR. Removed Hollow Triange Symbol in heading. Added upside down triangle symbols to H60XFA1212 & H100XFA1212 Cat Nos.

Mar-14

3 3-7 Revision Table 3.17; deleted solid diamond footnote Oct-14

3 3-8 correction

Table 3.18: Changed catalog number from MC3604X to MD3604XChanged list price MD3304X to $121.00 Changed list price MD3604X to $161.00 NOTE: ALSO deleted extra $ in all tables since they were stated in the $ Price column.

July-12

3 3-8 Pricing Change Table 3.19: Changed MDSAN20 & MDSAN11 prices to $37.00 Mar-153 3-10 Revision Updated page reference to SD page 2-3. Mar-14

3 3-11 correction

Moved Equipment Grounding Kit paragraph down so it all stays together. Equipment Grounding Kit Table: 400 and 600 row: changed terminal data column from (4) to (3). Table 3.26: added footnote: Standard Square D ANSI 49 grey paint, when selecting this suffix, switches will receive additional coat of paint. AND added row under gray: Gray ANSI61 SP861 with corresponding footnote. Lock-Off Guard Kit table: For use with 30-200 Ampere Series F NEMA 1, 3R, 12 and 12K switches only.

July-12

3 3-11 Revision Lock-Off Guard Kits table: added footnote: Factory install and kits are available for NEMA 1, 3R, 12 and 12K switch enclosures only. Oct-12

3 3-12 revision

Copper Only Lug Kits Paragraph: in front of NEMA 12 (in 2 places) added: 30 through 200 Amperes. Under Switch Lubricant: deleted ", a material safety data sheet, and re-lubrication information." in 1st paragraph. Last sentence, 1st paragraph: changed on to or. Deleted 2nd and 3rd paragraphs.

July-12

3 3-12 Revision Table 3.29: Added Class Column & Double Throw Row.Table 3.29: Double Throw Row: changed 30-200 A to 30-100 A. Mar-14

3 3-13 Revision Changed footnote under table 3.34 from “HU461AWK - 14-6 AWG (Cu)” to “HU461AWK - 14-3 AWG (Al or Cu).” Dec-12

3-14 Revision

Changed dimension on HU461AWKF6 to: 20.5, 521, 14.75, 375, 6.8, 173 and on HU462AWKF6 to: 21.25, 540, 16.13, 410, 6.8, 173 respectively.In dimensions table, right column, changed HU461AWK W/H from 11.00 in to 16.13 in and 279mm to 411 mm.

Dec-12

3 3-16 Revision Table 3.37: Removed footnote symbols from the following cat nos: 82255, 9245 & 82455. Mar-14

3 3-17 Revision Table 3.38: added footnote: Copper lugs not listed or available. AND added corresponding footnote to DTU366, DTU366R and DTU366AWK. July-12

3 3-17 RevisionTable 3.38: Removed half filled diamond symbol from Cat Nos: 82345R, 82345DS, 82445 82445R & H82445. Added half filled circle symbol to Cat NO: H82345, 82445R & H82445.

Mar-14

3 3-18 Revision

Table 3.39: Added Footnote: Double throw switches 92251, 92351, and 92451 are not available with factory or field installed electrical interlocks. AND added corresponding symbol to EIK1, EIK2 row. Under Phenolic Legend Plate changed page 2.4 to 2.3.

July-12

3 3-18 Revision

Above Key Interlock Systems heading added: Viewing Windows. See Table 3.29 for list price. Accessory available on 30–100 A DTU switches only. Replaced descriptive text for Lock-On Provisions—UL Listed. Table 3.39: Added price for 400 A Type 82000.

Mar-14

3 3-22 Correction Table 3.49: Changed all EI1 to EI. July-12

3 3-22 Revision Table 3.73: Added "PowerPact" to the LD, LG, LH, LL, LR Row. Changed YA1 suffix to YA for Copper Lugs. Oct-12

3 3-23 New Page Oct-12

Section Number Page Number Reason for

Change Specific Changes Made Change Date

4 4-1 Revisions

Changed out top right photo. Changed numerous page numbers, deleted NEW icon from everything except PM1200. Changed PowerLogic ION Enterprise Software to StruxureWare Power Monitoring Expert. Changed Remote Energy Management to StruxureWare Power Monitoring Expert for Data Centersand added a row for StruxureWare Power Monitoring Expertfor Healthcare. Changed PowerLogic Scada to StruxureWare Power SCADA Expert. CHanged PowerLogic ION and Power and Energy Meter Selection to PowerLogic Meter Selection. Added rows fo Series 3500 Power Meter and Series 5000 Power Meter. Deleted Remote Energy Management Solutions and PowerLogic Energy Profiler Online. Added CommX 200 Data Logger.Deleted New! Icon & Series 700 Power Meter Line. Changed first photo caption to: StrucureWare Energy Operation.

Oct-14

4 4-2 New Page New intro page; Moved Green Bar to right side of the page. Oct-14

4 4-3 RevisionsTable 4.1: Changed Reduce Energy Costs & Energy Efficiency to COSTMANAGEMENT. Changed Optimize Equipment Utilization to Ensure Power Quality. Changed Improve Reliability & Safety to Network Management.

Oct-14

4 4-4 correction

Price changes: IE60DLSUPG to $126 IE60DLS50UPG to $5040 IE60DLUNLTDUPG to $12375 IE60CLUPG to $520

Mar-12

4 4-4 New Page New page for StruxureWare.; Replaced StruxureWare photo. Oct-144 4-5 New Page New Page For SCADA; Changed photo. Oct-14

4 4-6 Revisions

Changed out presonalized dashboard photo with EEM CampusDashboard & EEM ScreenCap photos. Deleted top right photo. Replaced tier photo with Enterprise Software Platform Diagram. Under Key features header changed CO2 Report to Greenhouse Gas Emissions (CO2) Report.

Oct-14

4 4-7 correction Price changes: S8650A0C0E6E0B0A to $7077 S8650A1C0E6E0B0A to $7077 Mar-12

4 4-7 Revisions

Table 4.3: changed first two cat nos. to S8650A0C0E6E1B0A & S8650A1C0E6E1B0A.Changed last sentence of open paragraph to : Power Management Software applications. Under PowerLogic ION7550 and ION7650 heading: changed last sentence to read: Both are compatible with PowerLogic ION…. To Both are compatible with PowerLogic Power Management Software applications and....

Oct-14

4 4-8 Revisions Table 4.5: deleted last 2 rows.; Changed last sentence in opening paragraph to read They are compatible with Power Management Software applications…. Oct-14

4 4-10 Revisions Deleted New! Icons. Moved PM5000 info in place of the Series 700. Oct-144 4-11 correction Price changes: CVM42 to $2251 Mar-124 4-11 Revisions Added: PM3500. Table 4.11: Deleted Cat No CM4250. Oct-14




Section 5: Lighting Control and Integrated Home Systems

Section 6: Surge Protective Devices

Section 7: Circuit Breakers

4 4-12 RevisionsAdded: PM5000Moved PowerLogic PM5000 info to page 4-10. Table 4.17: added PM5500 column, deleted CM4250 Column and change some content in other rows.

Oct-14

4 4-13 correction

Removed "Tenant Metering Software Solutions" section. NOTE: Table numbering will change on rest of section from this point forward. Price Changes: E560020SQD to $960 E560090SQD to $1080 E5600120SQD to $1080 E5600160SQD to $1080 E5600360SQD to $1080 E5600450SQD to $1080

Mar-12

4 4-14 correction

Price Changes:HDMCT050S1 to $51 HDMCT100S1 to $51 HDMCT125S1 to $73 HDMCT150S1 to $62 HDMCT200S1 to $62 HDMCT250S1 to $62 HDMCT400S1 to $62

Mar-12

4 4-14 Revisions Change text in first bullet point from PowerLogic PM210, PM750 to PowerLogic PM5000 series, numereous changes on table 4.19. deleted references to PM750 in the footnotes. Oct-14

4 4-15 Revisions Table 4.23: Changed Cat Nos. 2W485C, EMBK-3 & PS24 to 30502W485C, 3050EMBK-3, 3090PS24 respectively. Oct-14

4 4-16 Revisions Table 4.27: changed Cat No BCPMSCCT2 to BCPMSCCT1and in its description change 4 ft leads to 6 ft leads & price from 431.00 to 492.00 Oct-14

4 4-17 Revisions Changed entire page from Remote Energy Management to Data Logger Oct-144 4-18 Revisions DELTED…EVERYTHING MOVED FORWARD. Oct-14

4 4-21 Revisions

Changed APM Active Pager Module to ENM Event Notification Module & in descriptive text changed Active Pager to Event Notification. Under Automated Solutions for Increased Reliability and Engergy Efficiency header add text at the end of the description ", and Mircrogrids". Las bullet pt. Changed Paging to Event Notification

Oct-14

4 4-22 RevisionsChanged Main page heading to Engineering Services and made Technical Engineering Support Services to heading above intro text. Added Solutions to fit your needs header and bullet points.

Oct-14

4 4-23 Revisions Table 4.32: deleted numbers rows and changed pricing. Deleted sentence under table. Oct-144 4-36 Revisions This page became blank because all pages moved forward from deletion of page 18. Oct-14


5 5-1 revision Complete redo to reflect delection of Obsolete Lighting Control Pages Mar-15

5 5-2 revision Under Controller Models Heading: Deleted NF3000G3C bullet point. Table 5.2 Under Networking, deleted C-Bus row Mar-15

5 5-3 revision Table 5.7: Controller: delted 3000C row. Mar-155 5-4 revision Deleted Device Power Supply, Device Router text and tables. Mar-15

5 5-5 Revision Changed Lightning Control and Integrated Home Systems to Lighting Controls in Title page and side tabs on all pages mar-14

5 5-5 Revision No changes except page number. Mar-155 5-6 Revision Mar-155 5-7 Revision No changes except page number. Mar-15


6 6-1 Revision

Added (SPDs) to Page Heading. Changed Internally Mounted Surge Protective Devices—New Construction to Internally Mounted SPDs–New Construction / Factory Assembled. Changed Internally Mounted Surge Protective Devices—Retrofit to Internally Mounted SPD—Retrofit/Ready to Install and added sub category Surgelocig SurgeLoc for NQ Panelboards with NEW! Symbol. Deleted NEW! Symbol from SDSA3650 SPDs, SDSA1175 SPDs, XR SPDs & Whole House SPDs. Added Photo of Surgelogic SurgeLoc.

Oct-14

6 6-1 Revision Replaced photo for Whole House SPDs Mar-15

6 6-2 RevisionTables 6.2 & 6.3: Added new footnote: Do not use on ungrounded systems. Systems must be solidly grounded. And corresponding symbols in table. Added Remote Monitor photo & Caption.

Oct-14

6 6-3 Revision Table 6.2 & 6.3: deleted NEW! Icon.; Table 6.6: First row of 480Y/277 V: change all 906.00 to 600.00 Oct-14

6 6-3 Revision Reduced Remote Monitor photo by 75% Mar-15

6 6-4 Revision

Table 6.4: deleted NEW! Icons. Added Numbers rows and change all pricing. Table 6.5, 6.6 & 6.7: Change pricing.Fixed background on HWA Series photo. Switched SDSA1175 and XR Series photos place. Table 6.8: Added new footnote: Do not use on ungrounded systems. Systems must be solidly grounded. And corresponding symbols in table. Changed HEPD Bracket Right-Facing photo caption to: TVSXRFMK. Table 6.10: fixed typo in footnote to "solidly"

Oct-14

6 6-5 Revision

Rearranged info on these pages and added SurgeLoc table & photo.Changed Retrofit Ready to Regrofit/Ready.Split this page into two HWA & Nipple Mounted on one page and SDSA1175 & SDSA3650 moved to page 6-6. All other pages shift one.

Oct-14

6 6-6 Revision Added Heading: Surgelogic SurgeLoc For NQ Panelboards. Oct-146 6-7 Revision Table 6.16: Change info in last row to Flush Mount Kit. Oct-146 6-7 Revision Table 6.12: under I-Line Branch Units, 2nd Cat No. Heading: Replaced all FI with HR Mar-156 6-9 New Page New Page Oct-14

6 6-9 Revision

Table 6.15: New Table. NOTE: Need price for first row. Table 6.16: Deleted all rows except for Flush Mount Kit. Deleted photos: SDSA2V & SDSA4P. Replaced photo for HEPD80 showing white label. REVISIONS: Deleted photo SDSB1175C. Replaced photo for SDSB1175R with SDSB80111. Table 6.15: Price for SDSB80111 added $345.00. Table: 6.16: Changed Cat No & price to HEPD80MKF $ $38.00. Changed TVSXRFMK photo caption to HEPD80MKF

Mar-15

6 6-10 New Page New Page Oct-14



7 7-1 New Added Photovoltaic Circuit Breakers & Switches reference Nov-13

7 7-2 Revision Changed 15–30 to 15–70 under the QO Circuit Breakers Header, QO-VH Subheadings in 2 places. July-13




5


7 7-2 Revision

Miniature Circuit Breakers Table: PHOTOS: removed HOM AFI, and QO AFI. Inserted HOM CAFI, HOM 1P DF, QO CAFI, QO 1P DF. Inserted Columns for HOM-DF, QO-DF & QOVH-DFSwapped added photos.Selection Table: Changed HOM-AFI to HOM-CAFI, QO-VHAFI & QOB-VHAFI tom QO-VHCAFI & QB-VHCAFI and 15-30 to 15-20. Under QOVH-DF: changed 10 to 22.

Mar-14

7 7-2 Revision In HOM-CAFI, QO-CAFI & QOVH-CAFI columns: Changed 1 to 1, 2. May-147 7-5 Revision Changed PowerPact 600 Photo. Mar-12

7 7-10 RevisionTable 7.1: Under 22 k AIR header, added Catalog Nos. & Prices for 40 A thru 70 A rows: QO140VH $73.00, QO150VH $73.00, QO160VH $73.00 & QO170VH $112.00 respectively.

July-13

7 11 Revision

Changed "QO Arc-Fault Circuit Breaker" to "QO Arc-Fault Circuit Breaker (Pigtail and Plug-On Neutral)". Added Image of Plug-On Neutral CAFI. Changed captions to: 1P QO-CAFI and 1P QO-PCAFI respectively. Table 7.6: Added two rows under Combination Arc-Fault Interrupter for Plug-On Neutral Arc Fault Interrupter.Changed arc-fault to Pigtail. Changed pricing on QO115PCAFI to 282.00, QO120PCAFI to 282.00, QO115VHPCAFI to 534.00 and QO120VHPCAFI to 534.00Added new icon. Table 7.6: changed Plug-On Neutral Prices to match Combination prices.

Oct-12

7 7-11 Revision Changed descriptive paragraph under QO Arc-Fault Circuit Breaker heading. Table 7.6: Added (Pigtail Neutral) to first row. Mar-14

7 7-11 Revision Table 7.6: Added One-Pole Title and added table for Two-Pole May-14

7 7-11 RevisionTable 7.6: Added footnote with rest at bottom of page: "For 120/240 V only, not for 208Y/120 V. Then added corresponding symbol (hollow triangle) to cat nos. QO215CAFI, QO215VHCAFI, QO220CAFI & QO220VHCAFI.

July-14

7 7-12 Revision Added QO-PCAFI to all references where QO-CAFI was specified Oct-127 7-22 Correction Changed header to read Class 611 / Refer to Catalog 0611CT1001 July-127 7-22 Revision Table 7.38: Diamond footnote: Deleted the 100% rated H and J text. Mar-157 7-23 Correction Changed header to read Class 611 / Refer to Catalog 0611CT1001 July-127 7-23 Revision Table 7.38: Diamond footnote: Deleted the 100% rated H and J text. Mar-15

7 7-24 Revision Under Table 7.46: Deleted Accessories Page Reference and Optional Lugs Page Reference. Mar-12

7 7-25 Revision Replaced L-Frame Circuit Breaker Photo. Mar-12

7 7-25 Correction Changed header to read Class 611 / Refer to Catalog 0611CT1001 . 2nd proof: Change Class 616 to 611 July-12

7 7-27 CorrectionTable 7.53 In the Terminal Wire Range column: changed AL1200P24K to AL1200P25K. Table 7.54: Added footnote to Option D to read For D pricing add termination pricing on page 7-45.

July-12

7 7-29 Revision Table 7.57: Changed the price of the HJL36100M73 from $1646.00 to $646.00. Mar-12

7 7-29 Revision Changed header to read Class 611 / Refer to Catalog 0611CT1001. 7-29 Table 7.57: changed price for HJL36100M73 to 1646.00 July-12

7 7-29 RevisionAdd at the bottom of the page: "To select combination starters and motorcontrollers using MCP's meeting NEC Article 430, refer to pages 16-35through 16-37.

Oct-12

7 7-30 Revision Changed header to read Class 611 / Refer to Catalog 0611CT1001 July-12

7 7-31 RevisionAdd at the bottom of the page: "To select combination starters and motorcontrollers using MCP's meeting NEC Article 430, refer to pages 16-35through 16-37.

Oct-12

7 7-31 Revision Table 7.62: changed 24 Vdc Multiplier header to 250 Vdc Multiplier. July-14

7 7-34 RevisionTable 7.69 deleted HRL36000S15 2138.00 2250A AL150HD. Table 7.72 added footnote to column K next to 50kA Footnote to read "R-frame withstand is 65kA." 2nd Change: Added AL150HD back in to the terminal column.

July-12

7 7-34 Revision Added triangle footnote after this catalog number (HGL26000S15) Oct-127 7-35 Revision Deleted both references to FH in 2nd & 3rd paragraphs. Added Caution Label with caption. Mar-12

7 7-35 Correction At the bottom of the page in the line for Optional Lugs deleted "-3-30"; On the line for Dimensions deleted "7-54 and", Then added " Supplemental Digest Page 3-33" July-12

7 7-35 Revision Table 7.77: changed 1st footnote to: Standard Rating 100% for 250A and 400A Only. Standard Rating 80% for 600A. July-14

7 7-36 Revision Replaced Masterpact NW Photo. Deleted all 4 Page References under Table 7.74. Mar-12

7 7-37 Revision

Added PowerPact J-and L-Frame Mission Critical info. Moved LA Mission Critical info to page 7-38.Removed all the (2) from all columns in all tables. Table 7.79: Removed the 600 Vac row. In the Terminal Wire Range Column removed the wire range and used footnotes to show the wire range for the lugs. Changed one price: 13786 to 16786Table 7.76: changed footnote wire ranges. In the Terminal Column: combined similar numbers.

Oct-12

7 7-37 Revision changed 50 A to 70 A in last paragraph of body text at the top of the page. Mar-14

7 7-38 Revision Moved all of the PowerPact D-frame Mission Critical Circuit Breaker information through Table 7.78 to Supplemental Digest Page 3-6 on lower half of page. Oct-12

7 7-39 CorrectionTable 7.79 In the voltage column changed the "/" to "-"; added footnote in column M,Â P and R frame Factory Installed Cat Suffix to BJ and BK Footnote to read "Not available on electrically operated P-frame."

July-12

7 7-39 CorrectionTable 7.79 In the voltage column changed the "/" to "-"; added footnote in column M,Â P and R frame Factory Installed Cat Suffix to BJ and BK Footnote to read "Not available on electrically operated P-frame."

July-12

7 7-39 Revision Table 7.82: under Time Delay Unit, deleted FL, FA, FC, FH, KA & KC. Mar-14

7 7-39 RevisionTable 7.82: Changed Auxiliary and Alarm switches description section: standard minimum Load= 100mA @ 24V. (Replaced 10 mA). Added Triangle footnote to H, J & L columns for Time Delay Units.

Mar-15

7 7-40 Correction Tables 7.80 and 81 in the rated voltage column changed "/" to "-" July-12

7 7-40 Revision

Table 7.82 changed Door Mounted Cat no. S29345 to S29346. Added S29345 $120.00, S29346 $179.00 to the Field Installed column for One early-break switch and Two early-break switch respectively. Under the L frame Added: RD12 S32597+S32605 $486.00; RD13 S32597+S29346 $545.00; RD22 S32599+S32605 $527.00; RD23 S32599+S29346 $586.00; RE13 S32598+S29346 $736.00

Oct-12

7 7-41 Revision Table 7.83: Changed Federal Pioneer to Schneider Electric in 7 places. Mar-12

7 7-41 Revision Table 7.83 In the column for M and P frame Factory Installed Cat No Suffix added a footnote to JE Footnote to read "Not available on M-frame." July-12

7 7-41 Obsolete

Table 7.83: Deleted all Schneider Electric Locks. In Handle Padlocking Device Row added another row for Fixed (lock OFF only)–2P.Added footnote to the bottom of the table 7.86 for columns that include M and P frame breakers using suffixes JB, JC, JD, JF stating "Not available for M,P or P frame drawout. Only available on P frame electronic.

Nov-13

7 7-41 Revision Added footnote to table 7.86 for JE suffix, 'not available on I-line' for P and R frames Mar-14

7 7-42 Revision Table 7.88: For CU400L61K3/4 removed the "(1) 2 AWG 500kcmil Al"; for the 3 CU600 lugs removed "Al or" Oct-12

7 7-42 Revision Table 7.88: Chagned number of wires from (1) to (2) in the last two rows. Added footnote for all Cu Lugs 'Not available with tapped hole for control wire Mar-14





Section 8: Operator Mechanisms and Disconnect Switches

7 7-43 Revision Table 7.90: Added horizontal rule dividing R-frame Ampere Ratings after 1200 A section. July-12

7 7-43 RevisionTable 7.90: removed the diamond symbol from the Circuit Breaker Type Columns. Changed Ampere ratings under the L-Frame & M-Frame headings. Under mounting type column changed Unit to Unit/line and added diamond symbols.

July-13

7 7-43 Revision Table 7.94: added footnote: Not for use with I-Line™ circuit breakers. Mar-157 7-44 Revision Table 7.96: Removed L-Frame row. July-13

7 7-45 Revision Changed header to read Class 611, 612 / Refer to Catalog 0611CT1001 , 0612CT0101. Table 7.101 In the example changed "E20" to "U31X" July-12

7 7-45 New Update Table 7.98: (new # is 101) Added 2 rows to include H&J Frame short terminal shields. Nov-13

7 7-46 Revision Changed header to read Class 611 / Refer to Catalog 0611CT1001 July-127 7-46 Revision Table 7.106: changed hollow triangle footnote to say OUT instead of IN. July-147 7-48 Revision Changed header to read Class 611, 612 / Catalog 0611CT1001, 0612CT0101 July-12

7 7-48 Revision Table 7.116: Under R-Frame Circuit Breaker/UL/600 A row: added X under 1000 A & 1200 A Columns. July-14

7 7-49 Revision Changed header to read Class 611, 612 / Catalog 0611CT1001, 0612CT0101 July-12

7 7-51 Revision Changed GCD Display photo. Changed GC2DSP Display heading to GCDSP. Table 7.123: Changed GC2DSP to GCDSP. July-14

7 7-53 Revision Replaced text for Add-On Ground-Fault Module (GFM). Mar-147 7-55 Revision Replaced Figure 28. Mar-12

7 7-55 Revision Table 7.130 added footnote in column No of Poles next to the "2" Footnote to read "Only HD and HG are in 2P module, HJ, HL and HR 2P are in 3P module." July-12

7 7-55 Revision Table 7.130: on the line for LG, LJ, LL, LR changed thedimension in column F from 8.93 to 7.87 Oct-12

7 7-56 RevisionAdded NEW Table 7.138 (rest will renumber after & one moved to the next page) for 316 Grade Stainless Steel Circuit Breaker Enclosures. Added two rows to old Table 7.140, now 7.144.

July-13

7 7-56 RevisionTable 7.137: PGL, PJL, PKL, PLL row: added "asterisk" footnote symbol. Table 7.137: Added 3 Rows and 3 footnotes. Moved ROWS: LEL, LXL, LXIL and LCL, LIL to SD page 3-34 in Table 3.108.

May-14

7 7-58 Revision Table 7.142: Removed KIL, KCL Row. Removed LAL, LHL, Q4L, LAL, LHL, Q4L. In square symbol footnote: deleted MXL, MEL reference. Mar-14

7 7-58 Revision Table 7.142: Added 3 rows.Table 7.143: Changed LCL, LEL, LIL, LXL, LXIL to LDL, LGL, LJL, LLL, LRL. Table 7.144: added 3 rows. May-14

7 7-58 Revision Table 142 - Deleted 3 rows Jan-15

7 7-59 New

COMPLETELY NEW PAGEAdded: Circuit breakers come 100% rated for ease of use and selection. At the end of the 3rd paragraph. Fixed spelling of rotary in 4th paragraph. Tables 7.145 & 7.148: moved rule up one row to be between 200 & 225. Table 7.147: under ratings changed D to G. Changed descriptive under Suffix Codes. Table 7.150: Added Trip System info and Changed Suffix Codes.Table 7.146. added Max. between Breaker and Interrupting. Table 7.148: changed Modled to Molded. Table 7.149: replaced Interrupting with Withstand. Table 7.150: moved Z10 thru Z50 up and under Trip System header.Added a degree symbol to 50C in first paragraph. Table 7.147: Added colons to Brand, Voltage & Grounding columns, added 350 and 450 to Amperage column, Added Class 611 / Refer to Catalog 0611Ct1302. Table 7.147: changed D to G. Table 7.150: changed Z00 to Z10. Table 7.148 Added hypen in Table Caption for Non-Automatic. 7.150: Added colons to Brand, Voltage & Grounding columns.

Nov-13

7 7-63 New Page NOTE: New page added at end of section for overflow from page 7-11. Mar-14

7 7-63 Revision Moved QO-K and corresponding table from Page 7-11 to make room for QO Dual Funtion from page 7-63. May-14

7 7-64 New Page New blank page Mar-14

7 7-60 New

COMPLETELY NEW PAGERemoved notes under individual tables and so there is just one note under Table 7.154 that says: For a complete list of Field installable accessories and details, including also motor operator (electrical only) and locks, refer to accessories information for the PowerPact, J-Frame (compatible with T-Frame) and L-Frame (Compatible with U-Frame). Or consult Photovoltaic offer catalog 0611CT1302. Table 7.151: Removed Catalog Numbers in Table Caption. Added two lines:3A/3B, Standard and Low-level, suffix: AC and AG, part Numbers: S29450 and S29452, Kit Qty: 3, Price: 891 and 1116with a note in the first column saying: Only U-Frame. Table 7.152: Removed Catalog Numbers in Table Caption and changed row order so PowerPact T-Frame comes before U-Frame. Tbl 7.153: Deleted Trip Suffix Codes and Kit Numbers from Table Caption. Tables 7.155, 7.156: added footnote and corresponding symbol in Description colum. "P: Poles, SC: Serial connector.Table 7.151: Change Table Caption from Switch to Switches and changed kit qty on 2A/2B Standard from 1 to 2 and on 1A/1B Low-Level (Gold) from 2 to 1. Move Standard 3A up so all Standards are together. Added footnote for both 3A & 3B that says "U-Frame Only". Table 7.152: Change Table Caption from Switch to Switches.Added Class 611 / Refer to Catalog 0611Ct1302. Moved NOTE under Table 7.154 to under Table 7.155. Table 7.154: merged Suffix columns to gain space. Added 00 to end of all prices that I could get to fit. Table 7.153: added s to table caption so it reads Shunt Trips. Table 7.151: Changed 3A to 3A/3B in rows 3 & 6. Changed $ to 372 for 1A/1B Low-Level. Table 7.160: Condensed 3rd & 4th rows into 1 row. Table 7.152: Changed some pricing. At bottom of page added NOTE: For availability dates of field installable accessories in tables 7.156, 7.157, 7.158, and 7.160, contact Schneider Electric.

Nov-13

7 7-61 New

COMPLETELY NEW PAGESwapped this page with 7-62 So T-Frame Comes FirstTable 6.163: Moved to very end onto page 7-62.Added Class 611 / Refer to Catalog 0611Ct1302. Table 7.160: removed columns: A, A1, B & C1. Altered diagram.

Nov-13

7 7-62 New

COMPLETELY NEW PAGESwapped this page with 7-61 So U-Frame is lastAdded Class 611 / Refer to Catalog 0611Ct1302. Table 7.163: removed columns A, A1, B & C1. Altered diagram.

Nov-13


8 8-3 Correction Table 8.2: Under UL column. Changed both entries from 1 to 10 and 16 respectively. July-12

8 8-4 Revision Added Non-Metallic Info, tables & drawings. NOTE: All tables renumbered from this point. July-13

8 8-7 Correction, Pricing Table 8.24: Changed cat no from MC3604X to MD3604X. Changed MD3304X price to 121.00 and MD3604X price to 161.00. July-12

8 8-7 Revision added "and conforms to IEC standard 60947-3" to end of first sentence. July-138 8-7 Price Change Table 8.27: Changed MDSAN20 & MDSAN11 prices to $37.00 Mar-158 8-8 Revision Table 8.26: changed the Fuse from J to L for the 800, 1000 and 1200 A switches Oct-12




7


Section 9: Panelboards

8 8-8 Revision

Removed both "Coming Soon". Table 8.28 & 8.29: added Shaft Style Columns. Changed Discount Schedule from CP1 to I11. Table 8.28: Added ro after Cat No. LK4GU3CN. 2nd PROOF: Changed photo caption from 300–60 A Compact to 30–100 A Compact. Table 8.29: Changed all 30-60 in the Rating Column to 30-100. 2ND PROOF: Table 8.29 Changed triangle footnote to read: Optional on shafts for LK4DU3CN, LK4GU3CN and LK4JU3CN. Added another footnote "For use on switches ending with CN only." and added its corresponding symbol to the first 4 catalog nos.

July-13

8 8-8 Correction Deleted Coming Soon. Nov-138 8-8 Revision Updated Table 8.37 Mar-15

8 8-9 Revision Marked this page as "Coming Soon". Table 8.33: added footnote : Compatible with 60 through 200 Amp switches. July-12

8 8-9 Revision Table 8.30: on GS2SU3 changed 480 V HP Rating from 400 to 500 and on GSTU2 changed 240 V HP Rating from 250 to 200 Oct-12

8 8-9 Revision

Removed all "Coming Soon". Tables 8.32 & 8.33: added Shaft Style Columns.Table 8.32: Added 2 rows after cat no. GS1DU3. Table 8.33: changed all 100-400 to 30-400 in the Rating Column. Changed callouts for GS2AH110 and GS2AH130. Added under Table 8.33: NOTE: Hole adapter kit for GS1 to GS2 Handles: GS24H100 to 200 $17.43. Table 8.34: changed Catalog Numbers GS2AM110 & GS2AM101 to GS1AM1100 & GS1AM101 respectively. Table 8.37: moved to bottom of page, added "for GS2 Switches" to table caption, changed footnote, kept "Coming Soon". Changed Discount Schedule to I11.

July-13

8 8-9 CorrectionDeleted Coming Soon. Under Table 8.33: Added footnote along with corresponding reference symbol to table Caption.Note under Table 8.33: changed GS24H100 to 200 to "GS2AH100TO200"

Nov-13

8 8-10 Revision

Marked this page as "Coming Soon". Tables 836 & 8.37 Changed Lug Part No. column heading to Lug Kit Catalog Number. To LK4QU3N & GS2QU3N rows: added 2 lines descriptive for each: Wires "1", lug size "600MCM", Lug Kit "GS1AW603" Wires "2", lug size "2 x 350MCM", lug kit "GS1AW606".

July-12

8 8-10 Revision

Removed "Coming Soon". Table 8.39: Changed Table Caption to: Power Distribution Lugs GS1 or GS2 Only. Changed GS2JU3N to GS1JU3 (first entry under For Use On Column). Added footnote "Cannot be used on GS2JU3N" changed Discount Schedule to I11.

July-13

8 8-10 Correction Table 8.39: changed Catalog number GS2MU3n to GS1JU3. Deleted Coming Soon. Nov-13

8 8-10 RevisionTable 8.38: row LK3QU3N: replaced #of wires and Lug Sizes. After Row GS1DU3 added rows for GS2EEU3 & GS2EU3N. GS2QU3N. Row GS2QU3N replaced #of wires and Lug sizes.

Mar-14

8 8-11 Revision Changed 30–60 to 30–100 in both headings. July-138 8-15 Correction Table 8.38: hollow star footnote: changed See Table 8.59 to See Table 8.44. July-128 8-15 Correction Changed E52360 to E52369 in first paragraph. Oct-15

8 8-16 Revision, Pricing Renumbered tables. "New Table #" 8.41: added solid triangle symble to 250 V header. "New Table #" 8.43: Changed all prices. July-12

8 8-17 Revision Renumbered tables. July-128 8-18 Revision Renumbered tables. July-128 8-19 Revision Renumbered tables. July-12

8 8-19 Revision Table 8.41: PowerPact M and P row: changed 7-3/16–11-5/8 to 9.00–12.50 and 7-3/16–22-1/4 to 9.00–23.50 Oct-12

8 8-20 Revision Renumbered tables. July-128 8-20 Revisioon Changed dimensions on: W/standard 6-inch handle diagram. Oct-128 8-21 Revision Renumbered tables. July-128 8-22 Revision Renumbered tables. July-128 8-23 Revision Renumbered tables. July-128 8-24 Revision Renumbered tables. July-128 8-25 Revision Renumbered tables. July-128 8-26 Revision Renumbered tables. July-12

8 8-26 Revision

Table 9.119 and 9.120 Added to the end of the 2P catalog numbers "( )" with a footnote at the end of the title for each 2P section. The footnotereads: "2P circuit breaker catalog numbers are completed by adding the required phase connection letter as a suffix see Table 9.125.Changed Table Refrence from 9.125 to 9.128 in two places.

)ct-12

8 8-27 Revision Renumbered tables. July-128 8-28 Revision Renumbered tables. July-12



9 9-1 Revision Updated table of contents to reflect table movement to end of section. Nov-13

9 9-2 RevisionTable 9.1: All new table was moved to the end of the section resulting in new pages 9-42, 9-43, 9-44. Left the text, table header and added note about the table moving to the end of the section

Nov-13

9 9-3 Revision Updated Table 9.3. July-139 9-5 Correction In Class No Heading: changed 1640CT0701 to 1640CT0801 Nov-139 9-6 Correction In Class No Heading: changed 1640CT0701 to 1640CT0801 Nov-139 9-7 Correction In Class No Heading: changed 1640CT0701 to 1640CT0801 Nov-139 9-8 Revision Table 9.12 Changed Cat. No. NQC550 to NQC50 in 2 places Mar-12

9 9-8 Correction Table 9.12: added a footnote "All 14" W boxes comes with blank endwalls" and corresponding symbol to the Cat No column under Box 14"Wx5.75" Db. Nov-13

9 9-9 CorrectionAdded a NEW table for NQ Optional Lugs. ALL TABLES WILL RENUMBER FROM THIS POINT FORWARD. Table 9.18: added 2 rows for handle ties under Handle Attachments heading. Footnote at bottom of page: changed $3.00 to $4.50

Nov-13

9 9-9 Revision Table 9.16: 600A Section under Sub-Feed lugs Column: changed "Use" to "Use FTL" May-14

9 9-10 Revision Table 9.19: QOB-GFI/208Y/210 Column: Changed Cat. Nos. QOB-EPD/240 Vac Column: Changed Cat. Nos. Mar-12

9 9-10 CorrectionTable 9.19: Added QOB-VHEPD section above QOB-HM—High magnetic trip circuit breakers subhead. Table 9.21: added Catalog Nos & Pricing for One-Pole 40A, 50A, 60A & 70A. Table 9l22: removed QOT Breakers.

Nov-13

9 9-11 Correction

Table 9.24: removed LC rows for 400 A & 600 A. Table 9.25: under subhead 22,000 AIR-Combo Arc: changed price from $940 to $680 and under subhead 22,000 AIR Qwik-Gard changed price from 294 to $575Table 9.25: Added info for LR & LJ in the last 2 rows of Columns Extra HIC and I-Limiter.

Nov-13

9 9-12 Correction In Class No Heading: changed 1640CT0701 to 1640CT0801. Table 9.30: Add row for 54 circuit. Table 9.41; changed LC to L-Frame. Nov-13

9 9-12 Revision Replaced Table 9.45. May-14




Section 12: Busway

9 9-13 Correction

Table 9.46: under Enclosure 20in W x 6.5 in D heading: in the last few rows changed Factory Assembled Only to only include 30 to 66 circuits and mad the 84 circuit entrys dashes. Table 9.47: Main Circuit Breaker Frame Column last entry: deleted (LC and LI factory assembled only). Table 9.48: deleted from Digest and moved to Supplemental Digest page 4-9. THIS WILL CHANGED TABLE NUMBERING.

Nov-13

9 9-14 Correction In table 9.54, changed Lug Wire Ranage for NFCUM1 from “one #6-350 kcmil” to “one #6-2/0”. July-12

9 9-14 Correction Table 9.54: Under CU Mechanical Lug Kit/Lug Wire Range Heading: changed 125 & 250 rows to: #6–2/0 AWG & #6–250 kcmil respectively. Nov-13

9 9-15 Revision Table 9.60: Changed Catalog Numbers for EXB Handle Ties. Changed Discount Schedule to CS2 Mar-12

9 9-15 Correction Changed EGB2HT EGB3HT to ECB2HT and ECB3HT July-129 9-21 Price Change Table 9.97: Price Increases Mar-15

9 9-22 RevisionTable 9.99: Changed Rows 4 & 5 under Type of Circuit Breaker to: LD, LG, LJ, LL 600 A 2,3 6.0 in & LC, LI, LS, LXI, LE 600 A, 2, 3 7.5 in. respectively. Changed Discount Schedule to CS2

Mar-12

9 9-22 Revision Table 9.99: All New information. Table 9.101: removed footnote symbols in Table Caption. July-12

9 9-22 RevisionTable 9.99: deleted SL800 & S33931. Added SL800M5, SL1200P5, SL1200P6 & SL1200P7Reverted back to previous Table.

Mar-14

9 9-23 Revision Table 9.107: Added 4 New Lug Kits. Mar-159 9-25 Revision Table 9.117: Under 3-pole, changed Ampere Rating to be 70 A through 225 A. Mar-12

9 9-25 Revision Table 9.116: added note: As of January 1st, FI breakers will only fit on the wide side of I-Line panelboards. Table 9.117: Revised 3-Pole, 240 Vac portion of table. July-12

9 9-26 Revision Table 9.120: Under R Column, J-Frame 250A 3P, 80% Rated Column,added prices. Deleted Star Footnote. Mar-12

9 9-26 Revision

Table 9.119 and 9.120 Added to the end of the 2P catalog numbers "( )" with a footnote at the end of the title for each 2P section. The footnotereads: "2P circuit breaker catalog numbers are completed by adding the required phase connection letter as a suffix see Table 9.125

Oct-12

9 9-27 Revision Table 9.124, L Withstand Column, Changed last 2 catalog numbers from LAL to LLA. Mar-12

9 9-27 Revision

Compressed Table 9.122 as much as possible by eliminating any line that didn't have a catalog number.Rearranged Tables 9.123, 9.125 and 9.126 to be side by side. Inserted the data from the PRICING NEMA selectivity Digest Format from the J-MC I-Line tab above the current Table 9.124.Table 9.123 changed one price: 4587 to 4857. In the Terminal Wire Range Column removee the wire range and used footnotes to show the wire range for the lugs. Table 9.124 changed 2 prices: 12064 to 9911 and 11485 to 12604. In the Terminal Wire Range Column removee the wire range and used footnotes to show the wire range for the lugs. Table 9.127: Remvoed the 600 V row. Table 9.128: Changed HDA36150WU31X to JDA34250WU31XChange HDA3516WU31X6 to JDA34250WU31X6Table 9.124: put separaters in and deleted terminals from last 4 sections.

Oct-12

9 9-27 Revision Table 9.125: Added footnote for 2 pole circuit breaker Mar-149 9-29 Revision Table 9.131: All New Information. July-12

9 9-29 Correction

Table 9.131: changed AL600LS52K3 to AL600LF52K3. Updated in hollow triangular footnote as well and changed 2/0 AWG to 3/0 AWG.Table 9.133: Changed AL600LS52K3 to AL600LF52K3. Added square footnote back in: For applications requiring communications, see Digest page 7.43.

Nov-13

9 9-30 Revision Table 9.136: all new information. July-129 9-34 Revision Table 9.158: Added Pricing for 800 A & 1200 A. Mar-149 9-34 Revision Table 9.150 Ground Bars: added square footnote symbol to Copper Ground Bar row. May-14

9 9-35 Revision

Added new note at bottom of page: Note: For series E1 and E2, QMJ switches may be used in 400A-1200A interiors in a NEMA 1 without door only. QMJ switches cannot be used in series E1 and E2, 225A panelboards. QMJ switches cannot be used in NEMA 1 with door or any NEMA 3R/12 enclosure.

July-13

9 9-37 Revision Revised Cabinet drawing at bottom of page. Jan-139 9-41 New ALL NEW PAGE Nov-139 9-41 Price Changes Table 9.193: Changed pricing Oct-149 9-42 New New page for Adding New Table 9.1 since it was too long to leave on page 9-2. Mar-149 9-43 New New page for Adding New Table 9.1 since it was too long to leave on page 9-2. Mar-149 9-44 New New BLANK page so the Section would end on an even number Mar-14

9 9-44 Revision Added over flow table 9.197 that they wanted added between Tables 9.17 & 9.18 on page 9-9. May-14


12 12-1 Correction Updated to reflect addition of page at the end of the Section (Page 12-20 which was already there, but blank). Added 400A reference to page 12-2. Nov-13

12 12-1 Revision Changed Powerbus photo. Under Powerbus Busway, changed 225 Ampere–240 Volt to 225 Ampere–600 Volt. Mar-14

12 12-2 Revision All new information. 2nd CHANGES: Moved everything from Powerbus Busway heading down to the top of the page. July-12

12 12-2 Correction

Changed Splash Resistant Busway heading and its corresponding paragraph to "Metering and Communications Options" and its corresponding paragraph and replaced the photo. Replaced Tables 12.1, 12.2. & 12.3. Added New Table for Meter Suffix.Under Construction heading: Changed 2nd to last sentence to read: This busway is available in 400 A, 225 A and 100 A ratings. Under Straight Sections, changed description to read: Straight sections of busway are available in 10 ft. and 4 ft. lengths in a painted or black finish. The Enhanced busway offer includes 10 plug-in openings on each side of a 10 ft. section and 3 plug-in openings on each side of a 4 ft. section. Tables 12.1 & 12.2: under 100 A: For Tap Box w/Meter: added square footnote symbol next to the diamond symbol. Table 12.3: End Closure row: Added Suffix A so they all ready AEC.

Nov-13

12 12-2 Revision

Changes in question were already made in 3rd Qtr 2013. ADDITIONAL Changes made: Table 12.1: Changed all catalog numbers in this table that begin with PBCP to PBCF. Changed PBCP3A100 ATBBM( ) to PBCF3A100ATBM( )B, PBCP4B100ATBBM( ) to PBCF4B100ATBM( )B, PBCP3A225ATBBM( ) to PBCF3A225ATBM( )B, PBCP4B225ATBBM( ) to PBCF4B225ATBM( )B, PBCP3A400ATBBM( ) to PBCF3A400ATBM( )B, and PBCP4B400ATBBM( ) to Change to catalog number PBCF4B400ATBM( )B. Table 12.2: Changed all catalog numbers in this table that begin with PBCP to PBCF. Catalog numbers ending in ATBBM( ) all changed to ATBM( )B. Meter Suffix Table: removed row for 6 Meter Suffix.table 2.2 changed PBCF4A100TBM( )B to PBCF4A100ATBM( )B

Mar-14




9


Section 14: Transformers

Section 15: Medical Products

Section 16: NEMA Contactors and Starters

12 12-3 Revision

All new information. 2nd Changes: Busbar Configuration Code parapgraph changed to Powerbus Plut-in Units. Put Plug-in Units table back in. Added New table for 120 V Factory Assembled Units at the bottom of the page. 3rd Changes: Table 12.4: deleted Rows 3E & 3B. Added three phase configurations & Types drawings Table 12.6: added notes under table: NOTE: See Digest section 7 for QO/QOB circuit breaker information. Many more factory assembled units are available using combinations of 1P/2P/3P circuit breakers with other NEMA receptacles. Maximum of 3 receptacles with 3 breaker spaces available. Consult your local Schneider Electric representative.. Table 12.7: deleted Type 1 row in header. NOTE: From this point forward all tables are renumbered.

July-12

12 12-3 Correction

Under Powerbus Plug-in Units: deleted last sentence of paragraph. Under Table 12.4: added a note: Plug-in tap box to be installed on 100 A and 225 A busways only. NOTE: there were additional tables to add to this page and there was not room. I put a note at the bottom of the page: "NOTE: Factory Assembled Units with Metering for Powerbus has been moved to page 12-20." I put it at at the end of the section like we did for Armando in Section 9. It is new page 12-20....which was already in the Section but was a blank.Table 12.7: For the 5A column, changed catalog numbers to contain QOU, not QU.

Nov-13

12 12-3 RevisionChanges in question were already made in 3rd Qtr 2013. NOTE: too much info was added to this page and it had to have a new page created at the end for the overflow (Page 12-20)

Mar-14

12 12-4 revision Renumbered Tables. July-1212 12-5 revision Renumbered Tables. July-1212 12-6 revision Renumbered Tables. July-1212 12-7 revision Renumbered Tables. July-1212 12-8 revision Renumbered Tables. July-1212 12-9 revision Renumbered Tables. July-12

12 12-9 Revision Table 12.20: change Cat No PTQ3680G( ) to PTQ36080G( ), PTQ4680G( ) to PTQ46080G( ), and in note under table deleted last sentence. Mar-14

12 12-9 Revision Deleted Table 12.23 July-1412 12-10 revision Renumbered Tables. July-12

12 12-10 Revision Deleted Table 12.24 Moved remaining info onto page 12-9. NOTE: ALL PAGES NOW MOVE FORWARD ONE AND LEAVES A BLANK ON PAGE 12-20. July-14

12 12-11 revision Renumbered Tables. July-1212 12-12 revision Renumbered Tables. July-1212 12-13 revision Renumbered Tables. July-1212 12-14 revision Renumbered Tables. July-1212 12-15 revision Renumbered Tables. July-1212 12-16 revision Renumbered Tables. July-1212 12-17 revision Renumbered Tables. July-1212 12-18 revision Renumbered Tables. July-12

12 12-20 New Page Content

Created new page for overflow of new information.Changed Powerbus Plug-in Units Header to: Powerbus Plug-in Units With Metering. Changed text under it to read: Powerbus plug-in units with metering are rated maximum 100 A and are offered as factory assembled units. All units conform to NEMA type 1. Added the meter suffix table from page 12-2. Added the following Note below the table." Replace the ( ) in above table with the appropriate meter suffix number. Connectors must be rated for appropriate voltages."

Nov-13

12 12-20 RevisionSee note for page 12-3. This is the new page at the end of the section for overflow from page 12-3. ADDITIONAL CHANGES: Meter Suffix Table: removed row for 6 Meter Suffix.

Mar-14


14 14-10 Correction Table 14.19: Row 36: Under Width/Inches column: changed 36 to 36.5. July-12

14 14-10 New Table 14.19: Inserted Enclosure 30E with dimensions & updated dimensions for Enclosure 31D. Nov-13

14 14-11 Revision Table 14.20: Updated Cap Screw Info. July-13

14 14-12 Correction Table 14.24: Changed weights from 710 to 510 for Catalog Nos.: MPZ15T2F & MPZB15T2F. Mar-12

14 14-20 Correction

Table 14.43: Under 2.4kV header: Row 300: changed 37D to 38D, Row 2000: changed 42F to 41F, Row 2500: changed 34F to 42F. Under 15 kV header: Row 225: changed 38D to 45D. Table 14.45: Under 2.4 kV header: Row 167: changed 37D to 38D, Row 333: changed 38D to 45D. Under 5 kV Header: Row 167: changed 37D to 38D, Row 333: changed 38D to 45D. Under 15 kV header: row 250: changed 38D to 45D, Row 333: changed 43F to 45D.

July-12


15 15-2 Revision In Table 15.2, removed boxsize 8 and combined all others into single row15 15-4 Correction Table 15.6: Under Mode: Changed to Single-phase. July-12


16 16-1 New Added new TOC entry for TeSys Products Nov-1316 16-1 Revision Added TeSys N Self-Protected Combination Staters & New Icon. Mar-15

16 16-11 Pricing, Revision

Changed prices on the following: 9999MP1 From $71.00 to $116.00, 9999MP2 From $71.00 to $116.00Table 16.25: changed 9990HR8 to 9998HWA1Table 9.128: changed JDA3425WU31X6 to JDA34250WU31X6

Oct-12

16 16-11 Correction Table 16.23: changed Red Pilog Light Price from 116 to 140. Nov-13

16 16-18 Correction

Under Solid State Overload Relay Protection heading: Deleted "H10 (for Class 10), H20 (for Class 20)". Changed (for selectable trip class protection). TO: (for selectable trip class 1 phase or 2 phase protection). Changed see pages 16-83, 16-102 and 16-103 to: see pages 16-83 and 16-102.Under Solid State Overload Relay header: changed to phase symbols to zeros.

Nov-13

16 16-18 Revision Added note on page to go to end of section for Bimetal information. Mar-1416 16-18 Revision Under Adapted Bimetal heading: changed Table Reference from 16.421 to 16-269. May-1416 16-19 Revision Moved Table 16.41 from page 16-18. Swapped order of tables. Mar-1416 16-35 Revision Table 16.86: Changed all DJL to LJL Oct-1216 16-36 Revision Table 16.88: Changed all DJL to LJL Oct-1216 16-38 Revision Table 16.92: Changed all DLL to LLL Oct-1216 16-39 Revision Table 16.94: Changed JLL36160 to JLL36150. Changed all DLL to LLL. Oct-12




16 16-39 Price Revision Table 16.96: Changed pricing. Oct-1416 16-40 Revision Tables 16.96 & 16.98: All new info. Oct-1216 16-40 Revision Tables 16.98: & 16.100 changed 480 Vac to 600 Vac. Mar-1416 16-41 Revision Table 16.104: Changed all "T" to "TF" Oct-1216 16-43 Revision Table 16.110: 1st row under High B column: changed 2-3/4 to 28-1/3 Oct-12

16 16-46 Correction

Under Solid State Overload Relay Protection heading: Deleted "H10 (for Class 10), H20 (for Class 20) or". Changed (for selectable trip class protection). TO: (for selectable trip class 1 phase or 2 phase protection). Changed see page 16-83 to: see pages 16-83 and 16-102.Under Solid State Overload Relay header: changed to phase symbols to zeros.

Nov-13

16 16-46 Revision Added note on page to go to end of section for Bimetal information. Moved Adapted Bimetal text from page 16-152 below Solid State Overload text. Mar-14

16 16-53 Revision Table 16.134: Changed all DJL to LJL. Oct-1216 16-54 Revision Table.16.136: Changed all DJL to LJL Oct-1216 16-55 Revision Table 16.138: Changed all DLL Types to LLL Oct-1216 16-56 Revision Table 16.140: Changed all DLL Types to LLLTable 16.142: Changed pricing. Oct-1216 16-56 Price Revision Table 16.142: Changed pricing. Oct-14

16 16-59 Revision

Under Table 16.150: under "Star" Footnote, added "NOTE: For contactors with more than 8 poles, the catalog number configuration will be the number of normally open contacts followed by a 0 and then the number of normally closed contacts (i.e. for 4 NO and 6 NC on a 10 pole contactor order 8903LG406V02).

Oct-12

16 16-60 Price Change

Table 16.156: Changed pricing for SXW1, SXW2, SWXA1, SWXA2, SXA13 & SXA14,Table 16.156: Changed Prices ont the following: SXW1 from 2217 to 11084, SXA1 from 2217 to 11084, SXW2 frin 9345 to 11685 & SXA2 from 9345 to 11685.Table 16.156: Changed prices on SXW1 from 11084. to 12206., SXW2 from 11685. to 13098. & SXA14 from 13365. to 11368.

Mar-15

16 Revision Table 16.181: Resistive Load column: changed 25 & 30 to 30 & 35 respectively. Mar-1416 16-71 Pricing Changed price on the following: 9999DMB1 From $7.70 to $15.00 Oct-1216 16-75 Revision Table 16.200: Changed all DLL Types to LLL Oct-12

16 16-75 Correction3rd Bullet: Changed "Class 10 Motor Logic™" to Motor Logic™ Class 10/20 (Selectable). Table 16.200: changed prices on Type nos. XSH2200 & XSH4400 from 58145.00 to 43133.00 on both.

Nov-13

16 16-75 Revision Table 16.202: XSH440: changed price from 4313300 to 43133.00 July-14

16 16-76 Revision Table 16.201: Added row to the bottom of table for Substitution of Class R rejection fuse clips Oct-12

16 16-77 Revision Moved Table 16.238 To top of page. Mar-1416 16-81 Revision Changed dimensions on the Type DPR14 through DPR44 drawings. Oct-12

16 16-82 Pricing, RevisionChanged price on the following: 9065TO1 From $72.00 to $100.00. Table 16.220: Deleted rows 4 & 5 Under Single Pole header. Table 16.221: Deleted SDO18 Series A, 777.50 & 1

Oct-12

16 16-83 Correction

Under Motor Logic Header: changed "Base Unit relays" to Solid State Oerload Relays, then combined that paragraph with the Feature Unit relays paragraph. Deleted Tables 16.223 & 16.224. NOTE: ALL TABLES IN THIS SECTION WILL RENUMBER FROM THIS POINT. Table Captions 16.225 & 16.226: Changed "Feature Unit" to "Class 10/20 (Selectable).

Nov-13

16 16-83 Revision Removed NOTE above Table 16.226 Mar-15

16 16-89 RevisionAdded note on page to go to end of section for Bimetal information. Moved Table 16.238 to top of page 16-77. Moved Adapted Bimetal Overload Relay Adapter text and tables 16.422 & 16.423 to bottom of page from page 16-152.

Mar-14

16 16-89 Revision Changed Heading: Adapted Bimetal Overload Relay Adapter TO: Adapted Bimetal Overload Relay Mounting Bracket Adapter. Changed mext to next. July-14

16 16-93 Revision At top of page in text, changed page reference from “16-105” to “16-95” Jan-13

16 16-102 Correction

Under Form Description: Deleted nos. 1 & 2. Changed 3—MOTOR LOGIC, Feature Unit to 3— MOTOR LOGIC, Class 10/20 (Selectable). Table 16.266: Deleted Base Unit, Trip Class 10 & 20 rows, changed Feature Unit Rows to: Class 10/20 (Selectable).

Nov-13

16 16-102 Revision

Added note on page to go to end of section for Bimetal information. Moved Table 16.264 to SD page ??? Moved Adapted Bimetal Overload Relay for NEMA Type S Starter and Table 16.421 from page 16-152. on last row of table 16.421 changed all 27 int cat nos to 32

Mar-14

16 16-102 Revision

Table 16.269: Changed the Q2C product configuration TO: the following table as a guide. On items 1 & 2 added (with single phase sensitivity). On items 3 & 4: changed (single phase) TO: (without single phase sensitivity). Table 16.270: Changed heading to: TeSys D Overload Relays for Tye S Size (phase/phase)-1, Non-Reversing and Reversing Starters. Removed line above Sensitivity. Changed W/O Lugs to Screw Termination in 2 places AND With Lugs TO Ring Tongue Connector in 2 places.

July-14

16 16-103 Revision Under Table 6.269: in the "Triangle" Footnote: changed 5 wire to 5 un-wired Oct-1216 16-103 Revision Table 16.271: Changed Used on Size column amounts. Oct-1416 16-108 Pricing, Revision Changed price on the following: 9998SO32 From $21.50 to $35.60 Oct-1216 16-108 Pricing Correction Table 16.287: Changed SO32 price from 35.60 to 50.00 Nov-13

16 16-109 Pricing Changed price on the following: 9998SG1, 9999SG2 & 9999SG3 From $14.30 to $29.00 Oct-12

16 16-110 Pricing Correction Table 16.295: Changed R10, R11, R12 & R13 pricing to 50, 75, 50 75 respectively. Nov-1316 16-111 Pricing Changed price on the following: 9999RB34 From $35.60 to $50.00 Oct-1216 16-111 Pricing Correction Table 16.300: Changed RB34 price from 50.00 to 100.00 Nov-1316 16-112 Pricing Changed price on the following: 9999SBT1 From $26.10 to $35.00 Oct-1216 16-112 Pricing Correction Table 16.301: Changed SBT1 price from 35.00 to 100.00 Nov-1316 16-115 Pricing Changed price on the following: 9991S1 From $21.50 to $35.60 Oct-1216 16-139 New Page NEW TESYS N PAGE Nov-1316 16-140 New Page NEW TESYS N PAGE Nov-1316 16-140 Revision Added: Replacement Parts ……..page 16-155 Mar-1516 16-141 New Page NEW TESYS N PAGE Nov-1316 16-141 Revision Added: Replacement Parts ……..page 16-155 Mar-1516 16-142 New Page NEW TESYS N PAGE Nov-13

16 16-142 Revision Table 16.395: Changed catalog numbering. Deleted 2 rows.Added: Replacement Parts ……..page 16-155 Mar-15

16 16-143 New Page NEW TESYS N PAGE Nov-1316 16-143 Revision Added: Replacement Parts ……..page 16-155 Mar-1516 16-144 New Page NEW TESYS N PAGE Nov-1316 16-145 New Page NEW TESYS N PAGE Nov-13

16 16-145 Revision Table 16.407: last row under operating voltage column: changed — to Without coil suppression. Mar-15

16 16-146 New Page NEW TESYS N PAGE Nov-13



11


Section 18: IEC Contactors and Starters

16 16-146 RevisionAdded New Table 16.142: TeSys Safety Chain Identification System. NOTE: All tables will be renumbered from this point on. Added photos from section 18 of LAD9ET1S & LADN22S.

Mar-15

16 16-146 RevisionAdded New Table 16.142: TeSys Safety Chain Identification System. NOTE: All tables will be renumbered from this point on. Added photos from section 18 of LAD9ET1S & LADN22S.

Mar-15

16 16-147 New Page NEW TESYS N PAGE Nov-1316 16-148 New Page NEW TESYS N PAGE Nov-1316 16-149 New Page NEW TESYS N PAGE Nov-1316 16-150 New Page NEW TESYS N PAGE Nov-1316 16-151 New Page NEW TESYS N PAGE Nov-1316 16-152 New Page Deliberately Blank Nov-1316 16-152 Revision New Product TeSys N added. May-1416 16-153 New Page NEW PAGE: New Product TeSys N added. May-1416 16-154 New Page NEW PAGE: New Product TeSys N added. May-1416 16-155 New Page NEW PAGE Mar-1516 16-156 New Page NEW BLANK PAGE Mar-15


18 18-1 Revision

Changed Enclosed D Line to: Enclosed TeSys D Starters and Combination Starters. Added TeSys U Self-Protected Combination Starters and photo of sameRemoved extra space after Contactors. Changed TeSys U to TeSys U (Open). Changed TeSys U Self-Protected Combination Starters to TeSys U Self-Protected Combination Starters (Enclosed). Removed GV7 photo and made all others larger. Replaced LUB photo and changed caption to TeSys U (p. 18-28).Changed photo caption on TeSys F1700, F2100 to: TeSys F1400, F1700, F2100

Mar-15

18 18-2 Revision Table 18.1: Deleted extra blank rows. Changed 60 to 60 V Mar-15

18 18-3 Revision Table 18.2: Under Coil Voltage: Changed numerous catalog numbers and deleted numerous entries. Mar-15

18 18-4 Revision

Table 18.3: Added "Continuous Current Rating (A)" Column between AC1 & No. of Poles. In first column changed 0.5 to 1/3, 1 to 1/2. For Cat No LC1D32 changed 575 V hp from 30 to 25. on Star footnote: Changed the last sentence of the footnote to: There is no charge for this modification. Table 18.4: Changed LRD08L & LRD10L to LR3D08L & LR3D10L. Added a row after 12–18: 16-24, D18-D32, LRD22, LR3D22, –, –, 62.00. Deleted two NOTES under table.Table 18.4, ROW 17--24: Changed D25-D32 to D18-D3, ROW 48-65: changed D40A-D65A to D50A-D65A, ROW: Changed D50-D80 to D40-D80

Mar-15

18 18-5 Revision

Table 18.6: Added "Continuous Current Rating (A)" Column between AC1 & No. of Poles. Changed 175 to 200 under 575 V column. For LC1F800 changed first two current ratings to 350 & 400 respectively. Table 18.8 changed F115, F150, and F185 to: F115, F150, F185 and F225.Changed LC1F115 photo from a 4-Pole to a 3-Pole and its caption from LC1F115 to F330. Changed photo caption LC1F1700, F2100 to LC1F1400, F1700, F2100. Table 18.6: Added a row between LC1F800 and LC1F1700 for LC1F1400. Same values as the F1700 except that AC1 and Continuous current rating are 1400 and price is $8,750. Added a footnote to Table 18.6 and added the symbol to catalog numbers LC1F1400, LC1F1700 and LC1F2100. "These contactors are ETL listed." Table 18.8: Changed F1700-F2100 to F1400-F2100 in two places.Table 18.8: Contactor column: changed F400–F780 to F400–F630 & F1400–F2100 to F780, F1400–F2100.

Mar-15

18 18-6 Revision

Table 18.10: 1st column: changed 0.5 & 1 to 1/3 & 1/2 respectively. Under AC1 combined the two cells 35 & 32 and made it 32. For LC2D32 change 575 V hp rating from 30 to 25. After row LC2D32 all rows changed and added two rows. Table 18.11: Changed F115, F150, F815 to F115, F150, F185 and F225. Deleted "Hz" in 2nd column in 4 places.Table 18.10: Removed decimal places in prices.

Mar-15

18 18-7 Revision

Table 18.14: Added "Continuous Current Rating (A)" Column between AC1 & Holding Circuit & a new row "Current Rated". Last row: changed first to columns to 350 & 400 respectively. Table 18.17: Table Title: changed Lines to Lines, 30,000 Cycles. Deleted LC1D95 row.Table 18.17 caption: changed 30,000 Cycles to 100,000 Cycles.

Mar-15

18 18-10 RevisionAdded New table for TeSys Safety-Chain Identification System.Table 18.29: fixed table formatting in the headings. Made Operational Voltage straddle both Vac Columns.

Mar-15

18 18-11 RevisionTable 18.33: Changed text in description column to not be bold. Changed .06 pricing to be 0.06 in two places. Tables 18.34, 35 & 36: Changed text in description column to not be bold.

Mar-15

18 18-16 Revision Table 18.49: deleted three rows and changed some Cat Nos, pricing and usages. Mar-1518 18-18 Revision Table 18.70: in Table title: changed F185, F265 to F185, F225, F265. Mar-1518 18-20 Revision Table 18.70: in Table title: changed F185, F265 to F185, F225, F265. Mar-1518 18-21 Revision Table 18.72: first two entries in column one: fixed style. Mar-15

18 18-28 Revision Table 18.117: Row 1: changed 130kA @ 460 V to 130kA @ 460 V and 65kA @ 575 V. Line phase barrier row: change (UL508E) to (UL 508 Type E) Mar-15

18 18-30 Revision Table 18.119: Changed UL508E to UL508 Type E Table 18.124: changed 60kA at 575 V to 65kA at 575 V. Mar-15

18 18-30 Revision Table 18.119: Changed UL508E to UL508 Type E Table 18.124: changed 60kA at 575 V to 65kA at 575 V. Mar-15

18 18-31 Revision

Table 18.128: changed Cat No. LU9APB21 to LU9APN43 & its technical data to: NEMA 1, 12, 3R, 4, 4X, Black, without trip indication. Deleted LU9APN22 row. Changed LU9APN24 to LU9APN44, price to 140.00 & tech data to: NEMA 1, 12, 3R, 4, 4X, Red/Yellow, without trip indication. Deleted Angle Bracket row.Above Table 18.130: Changed heading from Powerbus to Power Bus Bars.

Mar-15

18 18-31 Revision

Table 18.128: changed Cat No. LU9APB21 to LU9APN43 & its technical data to: NEMA 1, 12, 3R, 4, 4X, Black, without trip indication. Deleted LU9APN22 row. Changed LU9APN24 to LU9APN44, price to 140.00 & tech data to: NEMA 1, 12, 3R, 4, 4X, Red/Yellow, without trip indication. Deleted Angle Bracket row.Above Table 18.130: Changed heading from Powerbus to Power Bus Bars.

Mar-15

18 18-33 Revision Table 18.133: Changed Horsepower Ratings. Oct-12

18 18-33 Revision

Under Motor Protector Circuit Breakers heading: Changed last sentence to read: They are used as Type E manual self-protected combination starters. Table 18.135: deleted "Two Device Solutions" from table Caption. Changed square footnote to: These electronic motor protector circuit breakers include short circuit and overload protection.Table 18.133: changed first row 0.11-0.16 to 0.10-0.16. Under Motor Protector Circuit Breaker Heading: Deleted "They are used as Type E manual self-protected combinations starters."In 3rd paragraph of body text changed: type to Type in 2 places.

Mar-15




Section 19: Push Buttons & Operator Interface

18 18-34 Revision Table 18.4: changed/added/deleted multiple catalog numbers. Added notes under table. Mar-14

18 18-34 Revision Table 18.139: All new.Table 18.139: changed Cat No GV3G366 to GV3G66. Mar-15

18 18-37 Revision Table 18.149: Last row: change Incoming line insulator to Incoming line spacer. And changed 10 to 1 under standard pack. Table 18.150: All new. Mar-15

18 18-40 Revision

Table 18.165: Changed Table Caption to: TeSys D 9 to 38 A Contactors, AC and DC Coils. Deleted and LC1DT12 to LC1DT40 (4 pole) from 1st column heading. Changed 2nd col heading to: LC1D25 to D38 (3-pole) and LC1DT20 to DT40 (4-pole). Removed drawings. added new column headings under drawings. Table 18.166: Changed table Caption to TeSys D Contactors 40 to 80 A, AC Coils.Table 18.165: row b: duplicated dimensions from AC coil to DC coil.

Mar-15

18 18-41 Revision Table 18.167: Changed table caption to: TeSys D Contactors 40 to 150 A, DC Coils. Mar-1518 18-43 Revision Table under drawings: changed LC1F630 to LC1F630 and F800. Mar-1518 18-57 New Page NEW PAGE: New Product TeSys U added. May-1418 18-58 New Page NEW PAGE: New Product TeSys U added. May-1418 18-59 New Page NEW PAGE: New Product TeSys U added. May-1418 18-59 New Page Added new blank page May-14



19 19-9 Revision Changed Discount Schedule to CS1 Mar-1219 19-10 Revision Added Discount Schedules to CP1 & CS1 Mar-1219 19-11 Revision Changed Discount Schedule to CS1 Mar-1219 19-12 Revision Changed Discount Schedule to CS2 Mar-1219 19-13 Revision Changed Discount Schedule to CS2 Mar-1219 19-14 Revision Changed Discount Schedule to CS2 Mar-1219 19-16 Revision Changed Discount Schedule to CS2 Mar-1219 19-17 Revision Changed Discount Schedule to CS2 Mar-1219 19-18 Revision Changed Discount Schedule to CS2 Mar-1219 19-19 Revision Changed Discount Schedule to CS2 Mar-1219 19-20 Revision Changed Discount Schedule to CS2 Mar-1219 19-21 Revision Changed Discount Schedule to CS2 Mar-1219 19-23 Revision Changed Discount Schedule to CS2 Mar-1219 19-24 Revision Changed Discount Schedule to CS2 Mar-1219 19-25 Revision Changed Discount Schedule to CS2 Mar-12

19 19-26 CorrectionTable 19.67: 5th row, added the workd Flush in front of Booted in the Type of Push Column. Added new Row under that for Extended Boot. Changed Discount Schedule to CS2

Mar-12

19 19-27 Revision Changed Discount Schedule to CS2 Mar-1219 19-28 Revision Changed Discount Schedule to CS2 Mar-1219 19-29 Revision Changed Discount Schedule to CS2 Mar-1219 19-30 Revision Changed Discount Schedule to CS2 Mar-1219 19-31 Revision Changed Discount Schedule to CS2 Mar-1219 19-32 Revision Changed Discount Schedule to CS2 Mar-1219 19-33 Revision Changed Discount Schedule to CS2 Mar-1219 19-34 Revision Changed Discount Schedule to CS2 Mar-1219 1935 Revision Changed Discount Schedule to CS2 Mar-1219 19-36 Revision Changed Discount Schedule to CS2 Mar-1219 19-37 Revision Changed Discount Schedule to CS2 Mar-1219 19-38 Revision Changed Discount Schedule to CS2 Mar-1219 19-39 Revision Changed Discount Schedule to CS2 Mar-1219 19-40 Revision Changed Discount Schedule to CS2 Mar-12

19 19-40 Revision Added line drawing for ZBZ1800. 2nd Change: Table 19.110, added (except ZB5AT8643M) next to ZB4BT8• July-12

19 19-41 Revision Changed Discount Schedule to CS2 Mar-1219 19-42 Revision Changed Discount Schedule to CS2 Mar-1219 19-43 Revision Changed Discount Schedule to CS2 Mar-1219 19-44 Revision Changed Discount Schedule to CS2 Mar-12

19 19-45 RevisionTable 19.127: 5th row, added the workd Flush in front of Booted in the Type of Push Column. Added new Row under that for Extended Boot. Changed Discount Schedule to CS2

Mar-12

19 19-46 Revision Changed Discount Schedule to CS2 Mar-1219 19-47 Revision Changed Discount Schedule to CS2 Mar-1219 19-48 Revision Changed Discount Schedule to CS2 Mar-1219 19-49 Revision Changed Discount Schedule to CS2 Mar-1219 19-50 Revision Changed Discount Schedule to CS2 Mar-1219 19-51 Revision Changed Discount Schedule to CS2 Mar-1219 19-52 Revision Changed Discount Schedule to CS2 Mar-1219 19-53 Revision Changed Discount Schedule to CS2 Mar-1219 19-54 Revision Changed Discount Schedule to CS2 Mar-12

19 19-54 Revision Added note under Table 19.152:ZB5AT8643M not to be used with ZBZ16* guard July-12

19 19-55 Revision Changed Discount Schedule to CS2 Mar-1219 19-56 Revision Changed Discount Schedule to CS2 Mar-1219 19-57 Revision Changed Discount Schedule to CS2 Mar-1219 19-58 Revision Changed Discount Schedule to CS2 Mar-1219 19-59 Revision Changed Discount Schedule to CS2 Mar-1219 19-60 Revision Changed Discount Schedule to CS2 Mar-1219 19-61 Revision Changed Discount Schedule to CS2 Mar-1219 19-61 Revision Table 19.173: added (except ZB5AT8643M) next to ZB5AT8 July-1219 19-62 Revision Changed Discount Schedule to CS2 Mar-1219 19-63 Revision Changed Discount Schedule to CS2 Mar-12

19 19-64 Revision Table 19.185 Table, last row under description: Changed to: Empty enclosures. Changed Discount Schedule to CS2 Mar-12

19 19-65 Revision Changed Discount Schedule to CS2 Mar-12



13


Section 23: Relays and Timers

Section 24: Terminal Blocks

19 19-66 Revision Changed Discount Schedule to CS2 Mar-1219 19-67 Revision Changed Discount Schedule to CS1 Mar-1219 19-68 Revision Changed Discount Schedule to CS1 Mar-1219 19-69 Revision Changed Discount Schedule to CS1 Mar-1219 19-70 Revision Changed Discount Schedule to CS1 Mar-1219 19-71 Revision Changed Discount Schedule to CS1 Mar-1219 19-72 Revision Changed Discount Schedule to CS1 Mar-1219 19-73 Revision Changed Discount Schedule to CS1 Mar-1219 19-74 Revision Added Discount Schedule CS1 Mar-1219 19-75 Revision Changed Discount Schedule to CS1 Mar-1219 19-76 Revision Changed Discount Schedule to CS1 Mar-1219 19-77 Revision Changed Discount Schedule to CS1 Mar-1219 19-78 Revision Changed Discount Schedule to CS1 Mar-1219 19-79 Revision Changed Discount Schedule to CS1 Mar-1219 19-80 Revision Changed Discount Schedule to CS1 Mar-1219 19-81 Revision Changed Discount Schedule to CS1 Mar-1219 19-82 Revision Changed Discount Schedule to CS1 Mar-1219 19-83 Revision Changed Discount Schedule to CS1 Mar-1219 19-84 Revision Changed Discount Schedule to CS1 Mar-1219 19-85 Revision Changed Discount Schedule to CS1 Mar-1219 19-86 Revision Changed Discount Schedule to CS1 Mar-1219 19-87 Revision Changed Discount Schedule to CS1 Mar-1219 19-88 Revision Changed Discount Schedule to CS1 Mar-1219 19-89 Revision Changed Discount Schedule to CS1 Mar-1219 19-90 Revision Changed Discount Schedule to CS1 Mar-1219 19-91 Revision Changed Discount Schedule to CS1 Mar-1219 19-92 Revision Changed Discount Schedule to CS1 Mar-1219 19-93 Revision Changed Discount Schedule to CS1 Mar-1219 19-94 Revision Changed Discount Schedule to CS1 Mar-1219 19-95 Revision Changed Discount Schedule to CS1 Mar-1219 19-96 Revision Changed Discount Schedule to CS1 Mar-1219 19-97 Revision Changed Discount Schedule to CS1 Mar-1219 19-98 Revision Changed Discount Schedule to CS1 Mar-1219 19-99 Revision Changed Discount Schedule to CS1 Mar-1219 19-100 Revision Changed some catalog numbers. Changed Discount Schedule to CS2 Mar-1219 19-101 Revision Changed Discount Schedule to CS2 Mar-1219 19-102 Revision Changed Discount Schedule to CS2 Mar-1219 19-103 Revision Changed Discount Schedule to CS1 Mar-1219 19-104 Revision Changed Discount Schedule to CS1 Mar-1219 19-105 Revision Changed Discount Schedule to CS1 Mar-1219 19-106 Revision Changed Discount Schedule to CS1 Mar-1219 19-107 Pricing Price increase of 150% on all prices. Mar-1219 19-108 Pricing Price increase of 150% on all prices. Mar-1219 19-109 Pricing Price increase of 150% on all prices. Mar-1219 19-110 Pricing Price increase of 150% on all prices. Mar-1219 19-111 Pricing Price increase of 150% on all prices. Mar-1219 19-112 Pricing Price increase of 150% on all prices. Mar-1219 19-113 Pricing Price increase of 150% on all prices. Mar-1219 19-114 Pricing Price increase of 150% on all prices. Mar-1219 19-115 Pricing Price increase of 150% on all prices. Mar-1219 19-116 Pricing Price increase of 150% on all prices. Mar-12

19 19-117 Revision Changed Discount Schedule to CS1. 2ND PROOF: Table 19.352 Deleted B350 Information. Mar-12

19 19-118 Revision Changed Discount Schedule to CS2 Mar-1219 19-119 Revision Changed Discount Schedule to CS2 Mar-1219 19-120 Revision Changed Discount Schedule to CS2 Mar-1219 19-122 Revision Changed Discount Schedule to CS1 Mar-1219 19-123 Revision Changed Discount Schedule to CS1 Mar-12


23 23-15 Correction Table 23.64: Under Maximum Single Phse Horsepower header: changed DPST horsepower to 1.5, 1.5 & 1.5; on SPDT and DPDT also. July-12

23 23-30 Revision Replaced left photo, deleted right photo. Under Tble 23.145: Changed B300, R300, AC 15 and DC 13 to AC15 / B300 (NO/NC) DC13 / R300 (NO). July-13

23 23-33 Correction Changed Measpurment to Measurement. Tables 23.157 & 23.159: Changed Supply Voltage to 220–480 Vac. Mar-12


24 24-1 Revision All new page July-1424 24-2 Revision All new page July-1424 24-3 Revision All new page July-1424 24-4 Correction Changed AB1RRNTPAC242 to AB1RRNTPAC442. July-1224 24-4 Revision All new page July-1424 24-5 Revision All new page July-1424 24-6 Revision All new page July-1424 24-7 Revision All new page July-1424 24-8 Revision All new page July-1424 24-9 Revision All new page July-1424 24-10 Revision All new page July-1424 24-11 Revision All new page July-1424 24-12 Revision All new page July-14





Supplemental and Obsolescence Digest 176

Revised through October 2014

Supplemental and Obsolescence Digest

24 24-13 Revision All new page July-1424 24-14 Revision All new page July-14


2 2-1 Revision

Under General Duty Safety Switches header: changed General Duty Safety Switches to: Lug Kit 400 or 600 A General Duty Safety Switches. Under Heavy Duty Safety Switches header: added Electrial Interlock Kits and Contact Ratings above Key Interlock Systems.

Mar-14

2 2-2 Revision

Moved Voltage-Indicating Safety Switches Section to top of page 2-3 with the following changes: Table 2.1 renumbered to 2.2, last sentence of 1st paragraph changed fuse kit to appropriate. Added: "Not available on the following; NEMA 7 and 9 and NEMA 4 X Fiberglass and Krydon Enclosures." to the end of the 1st paragraph. Table title changed to: Voltage Indicators. Rows 1 and 3 of table: changed Supply to Line. Added sentence after Table, "In addition to the suffix in Table 2.2, a 3 must be added to the switch catalog number for all 30 and 60 Amp switches, i.e. H361AWK becomes H3613AWKLI. Field-Installed Lug Kit SECTION: changed Series E3 to General Duty. Table 2.2 becomes 2.1 and under Switch Rating Column deleted Series E3.Changed footnote under table to: 400 Amp NEMA 1 Series E03 only. 600 Amp NEMA 1 and 3R Series E01, E02 and E03.

July-12

2 2-3 Revision

Under Push Button—Pilot Light—Selector Switch Section: Deleted last sentence: Add suffix PB to switch catalog number. Change last sentence to read: Contact Schneider Electric for catalog number and availability prior to quoting a job. Added line; "Factory-installed price adder -- $584. for Heavy Duty and $1168. for Double Throw Switches. Price does not include cost of buttons/lights. For enclousre sizing, 30 and 60 Amperes switches will be in 100 Ampere enclosures. Added new Table 2.3: Electrical Interlock Contact Ratings from Supplemental Digest 175 page 2-3.

July-12

2 2-3 Revision

Table 2.2: Added Heavy Duty to Price header and a Double Throw Price Column with corresponding footnote. Added Electrical Interlock Kit information from SD175 page 2-3 and changed pricing in the Factory Installed Price column of the Electrical Interlock Kit Table.

Mar-14

2 2-4 Revision Renumbered Table to 2.4 July-12

3 3-2 Revision

Reformatted tables 3.1 and 3.2 to be the same as digest tables 7.37 and 7.38. Used ( ) for the third character with a footnote the same as in digest for Interrupting rating. Then use ( ) for the 9th character with the following footnote: "For 80% rated use "T" or for 100% rated use "R" in the 9th character place (for example HDL36015T or HDL36015R). 100% rated H- and J-frame circuit breaker\s have copper lugs and can only be used with copper wire." For the price columns used the prices shown in tables 3.1 and 3.2 for 80% and used the prices shown in tables7.37 and 7.38 for the 100% prices. 2nd Proof: Table 3.2: Removed the "T" from catalog numbers.

July-12

3 3-3 Revision

Reformatted table 3.7 the same as digest table 7.41. Used the same footnotes as above with pricing from table 7.41 for 100% prices. In the example use HGL36150TU31X or HGL36150RU31X. 2nd PROOF: Table 3.7 placed the ( ) in the 9th position in place of the T and added X as the last position in the catalog number. Changed pricing for the L Interrupt 80% column.

July-12

3 3-4 Revision

Reformatted table 3.11 to be the same as digest table 7.47 (3 pole only). Used the same footnotes as above with pricing from table 7.47 for 100% prices. In the example used LGL36400TU31X or LGL36400RU31X. As in the digest there are no catalog entries for 600A 100% ratings. 2nd PROOF: Table 3.11: placed the ( ) in the 9th position in place of the T & added X as last position in the cat no.

July-12

3 3-4 Revision Table 3.12: Changed table Caption & added a footnote. Oct-14

3 3-6 RevisionMoved all of the PowerPact D-frame Mission Critical Circuit Breaker information through Table 7.78 to Supplemental Digest Page 3-6 on lower half of page.

Dec-12

3 3-11 Correction Table 3.42: Under 2P subhead: changed row 400 A LAL36400 to LAL26400 July-12

3 3-15 Correction

Table 3.55: Replaced AIR with Interrupting, deleted I19 kA @ 480 Vac in table headers (12 places). Added Table 3.56: for PowerPact H & J Interrupting Ratings. NOTE: All tables will be renumbered after this.

Mar-12

3 3-15 Revision

table 3.55 Reformatted table headings to be similar to digest table 7.63 with Interrupting Rating at top and D, G, J, L below. Added a new table to be the same a table 3.5 just above the Accessories information. NOTE; with the added tables all tables afterwards will be reunumbered. 2nd PROOF: Changed lower 2 headers to match upper.

July-12



15


3 3-18 Revision

In the paragraph on 50 Degrees C added the following to the end of the sentence "To order...suffix to FA/FH/LA/LH or CA to H or J thermal magnetic breakers and add 20% to the List price of the breaker."

July-12

3 3-21 Revision

Under Ordering Information deleted the last sentence from item 6. Table 3.71: on the lines for H and J in the last column changed 18 to 42 and 35 to 42. On the line for MG, MJ Changed poles from 3 to 2 and added the footnote marker for "Built using 3P module." Then moved this line up under the LA, LH line. Added a line after the PG, PJ line to read "RG, RK Electronic Trip Unit 2 1200-2500A 35kA, 65kA" Added the last two footnote markers under the table after the 2 pole. Table 3.70 added a line between LH, LHL and MG, MJ to read "LD, LG, LJ, LL Electronic Trip Unit 3 250-600A 18kA, 25kA, 65kA, 100kA" In the line for PG, PK changed the interrupting rating from 65 to 50. In the line for RG, RJ added a second interrupting rating of 65kA before the 100kA. 2nd Changes: Table 3.71 - Removed all of the lines with 3 pole on them. Table 3.70 - On the line with LD, LG, LL in the Interrupting column changed 25 to 35; in the line for RG, RJ, RK, RL added 65kA before the 100kA. 2nd PROOF: Table 3.71: On the line for RG, RJ, RK, RL under Interrupt Rating changed it to read - "35kA, 65kA, 65kA, 100kA"

July-12

3 3-22 Correction

Replaced Main Header and 1st 2 paragraphs. Table 3.73: Added 3 rows, changed suffix notation in the Cat No Column. Added 2 footnotes. Replaced UL Naval Listed Circuit Breakers header and text. Table 3.74: Added a footnote marker after each of the frames with the following footnote: With Micrologic trip units only thermal-magnetic breakers not approved. Added a line to this table with the following: LD, LG, LJ, LL; 3.4; 250-600 A

Mar-12

3 3-22 RevisionTable 3.73: added "PowerPact" to the line with LD, LG, LJ, LL, LR. Changed YA1 to YA under the heading Cat No. BUT WAS ALREADY YA.

Dec-12

3 3-28 RevisionAdded Terminal Shields and Phase Barriers Table under Table 3.87. NOTE: All tables after this will be renumbered.

July-13

3 3-29 Revision Table 3.91: for cat no VC400LA7 changed 500-750 kcmil to 500-750 kcmil Al or 500 kcmil Cu. Mar-15

3 3-34 RevisionTable 3.105: added footnote "cULus listed" and corresponding symbols to NEMA 7 & 9 Cat Nos. Deleted footnote: "Not CSA Certified"

July-13

3 3-34 Revision Table 3.108: removed Hubs reference in column heads and added Rows LEL, LXL, LXIL May-14

3 3-35 Revision Added Table 7.142 from Digest page 7-58. Put it between Table 3.110 & 3.11, then deleted May-14

3 3-36 Revision

Table 3.111: added footnote: Standard Square D ANSI 49 grey paint, when selecting this suffix, switches will receive additional coat of paint. AND added row under gray: Gray ANSI61 SP861 with corresponding footnote.

July-12

3 3-36 Revision

Under Stainless Steel Front Heading: Changed the wording to read: "The FA100F NEMA Type 1, flush-mount circuit breaker enclosure is available with a stainless steel front. This modification is desirable in food handling areas such as cafeterias and restaurants." TABLE 3.112: deleted LA400FSS row.

Dec-12

3 3-37 Revision Under the heading Ordering: deleted last bullet point May-14

4 4-9 CorrectionAdded Table 9.48 that was deleted from Digest page 9-13 to bottom of page. All tables renumber at this point.

Nov-13

4 4-9 Correction Under the heading Ordering: deleted last bullet point. May-14

4 4-11 Correction, PricingRemoved PK1TC photo. Changed 3 prices LP9501 from 65.00 to 36.00, LP9502 from 81.00 to 15.00 and 8002506701 from 0.80 to 0.72.

July-12

9 9-3 Revision

Table 9.1: Added N to all Cat Nos. in table, L Interrupting/Cat. No Column: Changed 6th digit from 6 to 4 to all Cat Nos., ADDED LB Interrupting Column. Revised Table 9.2. Added new Interrupting Rating of LB on the right side of the table. With columns Icu and Ics. Doubled body of the table. MOved the values currently shown in the table to be in the bottom portion & added new values for the top portion. Subheads added: Manual (top) and Electrical (bottom). The voltages are the same for the top and bottom sections. Added values for the top:85kA,50kA,85kA,52kA,150kA,150kA,200kA,200kA50kA,50kA,70kA,52kA,150kA,150kA,200kA,200kA50kA,50kA,65kA,48kA,130kA,130kA,200kA,200kA40kA,40kA,50kA,37kA,100kA,100kA,100kA,100kA30kA,30kA,42kA,31kA,-,-,75kA,75kAIn the lower table added the following to the Ics columns:37kA,35kA,150kA,-,-37kA,35kA,150kA,-,-37kA,32kA,130kA,-,-30kA,25kA,100kA,-,-22kA,21kA,-,-,-Added new table: IEC Rated Breaker Termination Options

Mar-12

9 9-3 Correction Table 9.3: added an N prefix to all catalog numbers. Nov-13

9 9-3 RevisionTable 9.3: In the L interrupting column changed all catalog numbers having a '6' to a '4'. For example, NPLLE36063U32R changed to NPLLE34063U32R.

Mar-14

9 9-3 Revision Added footnote: Not available on 1600 A with "L" terminations. Mar-15

9 9-4 RevisionTable 9.5: Added N to all catalog numbers. Table 9.6: Changed Ics values. Added new table: IEC Rated Breaker Termination Options

Mar-12




9 9-5 Revision

Table 9.7: Added N to all Cat Nos. in table, L Interrupting/Cat. No Column: Changed 6th digit from 6 to 4 to all Cat Nos., ADDED LB Interrupting Column. Table 9.8 Same as Table 9.4 on page 3.

Mar-12

9 9-5 Correction Table 9.7: added an N prefix to all catalog numbers. Nov-13

9 9-5 RevisionTable 9.7: In the L interrupting column changed all catalog numbers having a '6' to a '4'. For example, NPLLE36063U32R changed to NPLLE34063U32R.

Mar-14

9 9-5 Revision Added footnote: Not available on 1600 A with "L" terminations. Mar-15

9 9-6 RevisionTable 9.9: Added N to all Cat Nos. in table,Table 9.10: added Ics values.Added IEC Rated Breaker Termination Option Table.

Mar-12

17 17-3 Revision Table 17.7: deleted last 2 rows in table Sept-12

17 17-17 Revision

Table 17.44: Deleted NEMA Type 3R Rainproof Outdoor Enclosure Column and last 4 column entries of the last row. On the line drawing labeled Types AG, AH, BG: Changed to Types AG, BG. Delted line drawing labeled Type BF1.

July-13

17 17-26 Revision

Table 17.69: Added an new footnote: When separate control is specified, use V8x (see page 17-32) voltage codes to specify motor and control voltages. Added corresponding symbols within the table.

Sept-12

17 17-31 Revision Table 17.91: changed KAL36250 to LAL36250 Oct-12

17 17-36 Revision Deleted the outline dimensional drawing. Moved Table 16.264 from Digest Pge 16-102. Mar-14


digest changes and updates - 2015 - schneider...

Documents