pega 357 with 04pc control layout drawings - used · pdf filepega 357 with 04pc control layout...
TRANSCRIPT
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 1 of 9
Pega 357 with 04PC Control Layout Drawings
Amada America Inc.7025 Firestone Blvd.
Buena Park CA. 90621Phone: (714) 739 2111
Fax: (714) 739 4099Email [email protected]
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 2 of 9
Warning! Qualified personnel must complete all work.
! Do not apply power to the Pega 357 until an A.E.S.I. (Amada Engineering andService Incorporated) Engineer is present and has instructed you to do so.
! Not all information required for proper installation, of the Pega 357 is included withthis document. Specific details for proper installation are found in the documentPega 357 with 04PC User Pre-installation Guide available at the Amada AmericaInternet web site at http://www.amada.com.
! Considerable effort has been made to ensure that this manual is free ofinaccuracies and omissions. However, as we are constantly improving ourproduct, some of the data contained herein may be out of date. Please check ourInternet site, http://www.amada.com, for the latest release of this document.
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 3 of 9
Table Of Contents
Planning the Location of the Machine ..............................................................................................................................................4
Plan View - Pega 357.......................................................................................................................................................................5
Plan View - Pega 357 with V357hs Conveyor..................................................................................................................................6
Plan View - Pega 357 with V357hs Conveyor and MP1225 Loader ................................................................................................7
End View - Pega 357 .......................................................................................................................................................................8
Elevation View - Pega 357 ...............................................................................................................................................................9
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 4 of 9
Planning the Location of the MachineThe following diagrams provide the details for positioning your new machine.
! Not all information required for proper installation, of the Pega 357 is included with this document. Specific details forproper installation are found in the document Pega 357 with 04PC User Pre-installation Guide available at the AmadaAmerica Internet web site at http://www.amada.com.
! No obstacles are allowed in the worksheet travel area and the ceiling must be at least 40" above the Pega 357.
! All of the Recommended Safety / Maintenance areas should be used, but you must at least ensure that the doors of the04PC control unit can be opened. Any reduction of the Recommended Safety / Maintenance areas may increase thepossibility of personnel injury and increase the time and cost of installation or maintenance.
! The Pega 357 and 04PC control must be protected from direct sunlight or other heat sources. Exposure to direct heatingsources such as infrared heaters have been shown to affect punch and die alignment.
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 5 of 9
Plan View - Pega 357
Optional Material Support Tables Required
Optional Material Support Tables Required
288.00" Maximum travel area 144" material
Electrical Requirements
Pega 357230 / 460 / 3 / 60 ±10% 18 kVA46 amps @ 230 / 3 / 60 VAC23 amps @ 460 / 3 / 60 VAC
Pega 357
Compressed Air Requirements
80 psi @ 2.9 ft³/min.
Indicates Operator Control Station
E1
E1
A1
A1
12" 12" 12"
Scale
PEGA 357
Fanu
c 04
PC
50.0
0" w
orki
ng r
ange
100.
00"
Max
imum
trav
el a
rea
50"
mat
eria
la
105.
97"
71.8
7"
177.
84"
Peg
a 35
7 le
ngth
31.3
9"49
.21"
5.04"0
27.56"
60.2
1"A
djus
tabl
e 50
" to
90"
Peg
a 35
7 C
ente
rline
72.05" 76.69"
148.74" Pega 357 width
Y axis origin
368.00" Recomended Safety / Maintenance Area 40" from all components
338.
44"
Rec
omen
ded
Saf
ety
/ Mai
nten
ance
Are
a 40
" fr
om a
ll co
mpo
nent
s
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 6 of 9
Plan View - Pega 357 with V357hs Conveyor
Optional Material Support Tables Required
Optional Material Support Tables Required
288.00" Maximum travel area 144" material
Electrical Requirements
Pega 357230 / 460 / 3 / 60 ±10% 18 kVA46 amps @ 230 / 3 / 60 VAC23 amps @ 460 / 3 / 60 VAC
Pega 357
Compressed Air Requirements
80 psi @ 2.9 ft³/min.
P357hs Conveyor208 - 230 / 460 / 3 / 60 ±10% .8 kVA2.1 amps @ 208 / 3/ 60 VAC2.0 amps @ 230 / 3 / 60 VAC1.0 amps @ 460 / 3 / 60 VAC
Indicates Operator Control Station
E1
E1
E2
E2
A1
A1
12" 12" 12"
Scale
PEGA 357
Fanu
c 04
PC
50.0
0" w
orki
ng r
ange
100.
00"
Max
imum
trav
el a
rea
50"
mat
eria
la
105.
97"
71.8
7"
177.
84"
Peg
a 35
7 le
ngth
31.3
9"49
.21"
5.04"0
27.56"
60.2
1"A
djus
tabl
e 50
" to
90"
408.
44"
Rec
omm
ende
d S
afet
y / M
aint
enan
ce A
rea
40"
from
all
com
pone
nts
Peg
a 35
7 C
ente
rline
Y-axis Origin
P35
7hs
Con
veyo
r
Access required this area for slug removal
44.70"70
.01"
72.05" 76.69"
148.74" Pega 357 width
368.00" Recommended Safety / Maintenance Area 40" from all components
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 7 of 9
Plan View - Pega 357 with V357hs Conveyor and MP1225 Loader
441.79" Recomended Safety / Maintenance Area 40" from all components
MP1225 Loader
MP1225Xformer
Access required this areafor material loading / unloading
141.74" MP1225 Loader width
66.5
4"12
3.10
"
189.
63"
MP
1225
Loa
der
Leng
th
Y-axis load position
Optional Material Support Tables Required
Optional Material Support Tables Required
288.00" Maximum travel area 144" material
Electrical Requirements
Pega 357230 / 460 / 3 / 60 ±10% 18 kVA46 amps @ 230 / 3 / 60 VAC23 amps @ 460 / 3 / 60 VAC
Pega 357
Compressed Air Requirements
80 psi @ 2.9 ft³/min.
P357hs Conveyor208 - 230 / 460 / 3 / 60 ±10% .8 kVA2.1 amps @ 208 / 3/ 60 VAC2.0 amps @ 230 / 3 / 60 VAC1.0 amps @ 460 / 3 / 60 VAC
MP1225 Loader
29 amps @ 200 / 3 / 60 VAC
200 / 3 / 60 ±10%, 10 KvaTo operate at 230 / 460 VAC a step up transformer is required with the following service is required
26 amps @ 230 / 3 / 60 VAC13 amps @ 460 / 3 / 60 VAC
MP1225 Loader 75 psi @ 31.8 ft³/min.
Indicates Operator Control Station
E1
E1
E2
E2
E3
E3
A2
A2
A1
A1
PEGA 357
Fanu
c 04
PC
50.0
0" w
orki
ng r
ange
100.
00"
Max
imum
trav
el a
rea
50"
mat
eria
la
105.
97"
71.8
7"
177.
84"
Peg
a 35
7 le
ngth
31.3
9"49
.21"
5.04"0
27.56"
60.2
1"A
djus
tabl
e 50
" to
90"
408.
44"
Rec
omen
ded
Saf
ety
/ Mai
nten
ance
Are
a 40
" fr
om a
ll co
mpo
nent
s
Power Supply
Peg
a 35
7 C
ente
rline
12" 12" 12"
Scale
P35
7hs
Con
veyo
r
Access required this area for slug removal
44.70"70
.01"
72.05" 76.69"
148.74" Pega 357 width
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 8 of 9
End View - Pega 357
37.68"*Material Pass Line
85.59"*
119.84"*
17.32" 30.71"
12" 12" 12"Scale
14.76"29.53"5
35.43"476.69" 72.05"
148.74"7
*Dimension varies with installed options
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/02/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 9 of 9
Elevation View - Pega 357
12" 12" 12"Scale
51.77" Throat Depth50.00" Track 200Working Range
Center Track 200
33.47"32.87"
9.84"
6.50"
11.02"
177.84"
33.47"103.15"7.76"
37.68"* Material Pass Line
62.99"
27.56"
85.59"
*Dimension subject to change with installed options