10

1

2

6-22 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

9

6

7

5

3

4

8

PENGUIN FILTER CHAMBERS

Penguin Series C Filter ChambersPenguin filter chambers are offered in CPVC, polypropylene, and PVDF. The construction of the Series C chambers contains no fragile lucite or glass. There is no metal to liquid contact, no springs to lose or break, and no crushed tubes. Penguin CPVC and polypropylene chambers are recommended for most acid and alkaline solutions. PVDF chambers are recommended for high temperature acids and alkalies, HF, and electroless nickel. All Series C chambers can be mounted on a common polypropylene base and manifolded together for greater capacities or space saving requirements. For portability, casters can be added as an option. Penguin Series C double open end (D.O.E.) chambers are available in single tube, three tube, five tube, and twelve tube vessels. The Series C single open end (S.O.E.) chambers are available in single tube, two tube, four tube and nine tube vessels. Each D.O.E filter chamber is equipped with an initial Penguin 15 micron filter cartridge or set of filter cartridges. Filters for S.O.E chambers are purchased separately. Because of the unique Penguin design, these cartridges ensure maximum particle retention and no liquid bypass. Available options include:• Chamber Diameter: 3” , 4”, 6”, 8”, 12” • Construction Material / O-Ring Material: CPVC/EPR , Polypropylene/EPR, PVDF/Viton • End Cap Configuration: Double Open End or Single Open EndPlease contact customer service for assistance in sizing your Filter Chamber.

Penguin CN In-Tank Filter ChambersPenguin in-tank filter chambers allow for depth filtration that is completely limited to inside the tank. Thus, there is no possibility of solution loss in the Series CN chambers. The 3CN chambers are completely constructed of CPVC, polypropylene, and PVDF while the 6CN chambers are constructed of CPVC or polypropylene. This includes the rugged mounting bracket. Penguin models include single and three cartridge vessels in 10”, 20”, and 30” cartridge lengths. The Series CN chambers incorporate all of the unique construction advantages of our style 3C and 6C chambers. The cartridge compressor design in the style 3C chamber and the double labyrinth o-ring sealing, along with the long-sleeved flange on the top of style 6C, are also incorporated into our Series CN chambers. Available options include:• Chamber Diameter: 3”, 4”, 6” • Construction Material / O-Ring Material: CPVC/EPR, Polypropylene/EPR, PVDF/

Viton • End Cap Configuration: Double Open EndPlease contact customer service for assistance in sizing your Filter Chamber.

Features• Leak-Resistant • Corrosion-Resistant • No Liquid Bypass/No External Frame Rods • Removes Solid Dirt Particles • Quick Change Cartridge • Choice of Construction Materials • Uses Filter Cartridges, Submicronic Pleated Cartridges, or Filter Sleeves

Features• Leak-Resistant • Corrosion-Resistant • No Liquid Bypass/No External Frame Rods • Removes Organic Contaminants and Solid Dirt Particles • Easy Conversion to Filter Chamber • Choice of Disposables Carbon Cartridge or Bagged Granular Carbon

10

2

1

www.fabcoplastics.com 6-23

9

6

7

5

3

4

8

PENGUIN FILTER CHAMBERS

Penguin CT Carbon Treatment ChambersPenguin filter chambers are offered in CPVC, polypropylene, and PVDF. The construction of the Series C chambers contains no fragile lucite or glass. There is no metal to liquid contact, no springs to lose or break, and no crushed tubes. Penguin CPVC and polypropylene chambers are recommended for most acid and alkaline solutions. PVDF chambers are recommended for high temperature acids and alkalies, HF, and electroless nickel. All Series C chambers can be mounted on a common polypropylene base and manifolded together for greater capacities or space saving requirements. For portability, casters can be added as an option. Penguin Series C double open end (D.O.E.) chambers are available in single tube, three tube, five tube, and twelve tube vessels. The Series C single open end (S.O.E.) chambers are available in single tube, two tube, four tube and nine tube vessels. Each D.O.E filter chamber is equipped with an initial Penguin 15 micron filter cartridge or set of filter cartridges. Filters for S.O.E chambers are purchased separately. Because of the unique Penguin design, these cartridges ensure maximum particle retention and no liquid bypass. Available options include:• Chamber Diameter: 3” , 4”, 6”, 8”, 12” • Construction Material / O-Ring Material: CPVC/EPR , Polypropylene/EPR Please contact customer service for assistance in sizing your Filter Chamber.

Penguin CB Filter Bag ChambersPenguin filter bag chambers are designed for high volume surface filtration. Completely constructed of CPVC, the Series CB filter bag chambers allow for filtration down to 1 micron. Filter bag replacement is easy with the removal of one snap ring. There are four sizes incorporating all of the construction advantages of our style 6C and 8C chambers. The double labyrinth o-ring sealing and the long-sleeved flanges, top and bottom, allow these chambers to operate at higher pressures and/or temperatures while eliminating the use of external frame rods. Available options include:• Chamber Diameter: 6”, 8”• Construction Material/O-Ring Material: CPVC/EPRPlease contact customer service for assistance in sizing your Filter Chamber.

Features• Leak-Resistant • Corrosion-Resistant • No Liquid Bypass/No External Frame Rods • Removes Solid Dirt Particles • Quick Change Cartridge • Rugged CPVC Construction including Mounting Bracket • Complete In-Tank Filtration

Features• Leak-Resistant • No Liquid Bypass/No External Frame Rods • CPVC Construction • Filtration Down to 1 Micron • Simple Filter Bag Replacement • High Volume Surface Filtration • Lower Initial Cost/Reusable Filter Media

10

1

2

6-24 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

9

6

7

5

3

4

8

Penguin PF Wound Filter CartridgesPenguin wound filter cartridges provide true depth filtration and are available in a wide selection of media and cores, including pre-leached fibrillated polypropylene, to ensure temperature and chemical compatibility. The Series PF cartridges feature porosities from 0.5 micron to 150 micron, lengths from 3” to 40”, and a variety of diameters. Available options include:• Filter Media: polypropylene, fibrillated polypropylene, utility

grade polypropylene, natural cotton, bleached cotton, rayon, polyester, nylon, modacrylic (dynel), glass

• Mircron Rating: 0.5, 1, 3, 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, 150

• Tube O.D.: 2 1/2”, 2”, 2 3/8”, 2 3/4”, special • Length: 4”, 6”, 9 3/4”, 9 7/8”, 10”, 12”, 19 1/2”, 20”, 29 1/4”,

30”, 39 1/4”, 40” • Core Type: polypropylene, tin steel, 304 SS, 316 SS, special • Core Cover: none or cover compatible with media • End Treatment: none or treatment compatible with media • Extended Core: none or compatible to core Please contact customer service for assistance in sizing your Filter Cartridges.

Penguin Series PS Filter SleevesPenguin filter sleeves are an alternative to standard wound filter cartridges. The Series PS filter sleeves are economical, reusable, and efficient when placed over its one-time purchased polypropylene core and caps. These sleeves can be precoated and backwashed several times before the retention of the sleeve is reduced. Series PS filter sleeves are available in porosities from 2 micron to 100 micron and in lengths from 10” to 40”. Available options include:• Mircron Rating: 2, 10, 25, 50 • Length: 10”, 20”, 30” , 40” • Sleeve Media: P = polypropylene • Core Material: P = polypropylene • Core Length: 10”, 20”, 30”, 40” Please contact customer service for assistance in sizing your Filter Cartridges.

Features• True Depth Filtration • Various Core and Media Material • Combinations including Preleached

Fibrillated Polypropylene • Chemical and Temperature

Compatibility • Wide Choice of Porosities

Features• Economical • Reuseable • Efficient • Long Lasting

PENGUIN FILTER CARTRIDGES

10

2

1

www.fabcoplastics.com 6-25

9

6

7

5

3

4

8

Penguin Series PC Carbon Filter CartridgesPenguin carbon filter cartridges are a one-step carbon and filtration treatment. These Series PC carbon cartridges eliminate the problems associated with loose carbon treatment and the need for a separate filtration system. The standard cartridge measures 2 3/4” O.D. with lengths varying from 4” to 40” and flow rates up to 2 1/2 gpm. These Series PC carbon cartridges are designed to be used in either single or multi-tubed vessels. These cartridges are available in 4 different styles. Style GC is an outer wound cartridge which utilizes a special high grade activated granular carbon with a very low sulfur content. Style CP is also an outer wound cartridge which features layers of paper impregnated with activated powdered carbon. Style C is a porous polyethylene shell containing high grade activated granular carbon. Style M features an outer layer of polyolefin webbing with an impregnated carbon powder interior. Available options include:• Carbon Style: Granular Carbon/Outer Wound, Carbon Paper/

Outer Wound, Granular Carbon/Porous Shell, Impregnated Carbon/Outer Wound

• Length: 4”, 6”, 9 3/4”, 9 7/8”, 10”, 20”, 30”, 40” • Core Material: Polypropylene, 304SS • Fiber Material/Shell: porous polyethylene/stand. poly. outer

wound, fibrillated FDA outer wound, polypropylene FDA outer wound, bleached cotton FDA outer wound

Please contact customer service for assistance in sizing your Filter Cartridges.

Penguin PP Pleated Filter CartridgesPenguin pleated filter cartridges are an alternative to string wound or spun moulded filters. These Series PP pleated cartridges are economical, multi-use, premium quality products that are available in various micron ratings ranging from 50 micron nominal down to .10 micron absolute. End cap configurations include D.O.E. (double open end, flat gasket) and S.O.E. (single open end, external double 222 0-ring/button end cap). Filter medias available include self-bonded fine diameter polypropylene fibers as well as membranes constructed of polypropylene, nylon, or PTFE. Series PP pleated cartridges contain no surfactants or binders that can break down, leach out, or permit the typical problems of channeling and media migration. Maximum effective open surface areas allow for high flow rates at reduced pressure losses, as well as high dirt holding capacity, long service life, large throughputs, and lower operating costs. Available options include:• Filter Media: nylon, nominal polypropylene, nominal submicronic

polypropylene, absolute polypropylene, absolute submicronic polypropylene, absolute Teflon

• Mircron Rating: 0.1A, 0.1, 0.2A, 0.2, 0.4A, 0.45A, 0.4, 0.8A, 1, 3, 5, 10, 15, 25, 30, 50

• Length: 9 3/4”, 10”, 19 1/2”, 20”, 29 1/4”, 30”, 39”, 40” • End Cap: black industrial grade vinyl (style D only), blue FDA

acceptable (style D only) DOE flat gasket, SOE external double 222 O-ring/ button end cap, DOE internal single 120 O-ring, SOE internal 020 O-ring/ button end cap

• Gasket or O-Ring Material: Style D, Buna-N, EPR, viton, silicon, Please contact customer service for assistance in sizing your Filter Cartridges.

Features• Nominal and Absolute Particle

Retention Ratings • Superior Flow Characteristics • High Dirt Holding Capacity • Many Lengths and Cartridge

Styles

PENGUIN FILTER CARTRIDGES