Lego SuperCopter Instructions

DESIGNED FOR AGES 7-11

LEGO SUPERCOPTER MAY CONTAIN SMALL PARTS NOT SUTABLE FOR SOME CHILDREN

IntroductionHi boys and girls! My name is Lego Man and I need YOUR help! The crime is on the rise in

Logo Town and I need you to build a Lego Supercopter to help fight crime. If you’re up to the challenge then just follow these easy steps and soon we’ll have an eye in the sky to fight the villains of Lego Town.

Below is a picture of the finished Supercopter.

Parts ListSkid

• 3 red 6-pin (square single)• 2 black 4-pin (flat, single)• 1 red 6-pin with slant (square single)• 1 grey 6-pin with slant (square single)

• 1 yellow 2-pin with handle (flat)• 1 white 2-pin with handle (flat)• 1 black rail gun

Tail Connector• 2 red 2-pin (square single)• 1 red 4-pin (square)• 1 red 2-pin with jet (square single)• 1 red 2-pin (single, flat)• 1 red 20-pin (flat)• 1 red 6-pin/triangle (square flat)

Main Helicopter Blades

• 1 red 4-pin (square)• 2 yellow 10-pin (single, flat)• 1 black 6-pin (flat, single)• 1 red 6-pin (flat, single)• 1 yellow & grey 4-pin rotator (flat)• 1 white round 4-pinBody

Nose • 1 grey triangle • 1 black triangle • 2 clear windows

Steering Wheel Assembly • 1 red steering wheel • 1 black triangle • 1 red 2-pin (flat, single)

• 1 white 2-pin (flat, single)

Base

• 1 yellow seat• 1 red 12-pin (flat)• 1 grey 4-pin (flat)•1 black 4-pin (flat)• 1 grey 12-pin (flat)•1 blue 8-pin (flat)•1 grey 4-pin with handle (flat)• 1 red 4-pin with triangle (square)

Cockpit

• 3 red 2-pin (square single)• 1 red 2-pin with handle (square, singles)• 1 white window• 1 red window• 3 red 4-pin (square single)•2 black 4-pin (square single)• 1 black 4-pin (flat single)• 1 red 8-pin (flat)• 1 white 8-pin (flat)• 1 blue flat pieceTail Rotor

• 1 black 4-pin round

• 1 yellow 4-pin (flat single)•1 blue 4-pin (flat single)•1 red 4-pin (flat single)• 1 white 4-pin (flat single)•1 black & grey 4-pin rotator• 1 white 4-pin with hinge• 1 black 4-pin with hinge• 1 red triangle• 1 grey triangle • 1 yellow 2-pin with slant• 1 red 1-pin (flat, single)• 1 black 1-pin (flat, single)

1.1 Skid Assembly

Parts required to build the skid assembly

1.2 Connect the gray 6-pin slant to the gray 6-pin using the flat 4-pin black connector.

1.3 Connect the red 6-pin slant to the red 6-pin using the flat 4-pin black connector.

1.4 Connect the yellow and white 2-pin handles to the red 6-pin, as shown.

1.5 Connect the 2 red 6-pins to the newly created skids as shown. (PAY ATTENTION TO WHICH WAY THE SLANTS ARE POINTING.)

1.6 Place the gun in the front hole of the red skid.

2.1 Steering Wheel Assembly

Parts to build the steering wheel assembly

2.2 Place red and white 2-pin flats on the underside of the black triangle, as shown.

2.3 Place the steering wheel on the top center of the black triangle.

3.1 Nose assembly

Parts to build the nose assembly

3.2 Connect the 2 window triangles, as shown.

3.3 Connect the window triangles to the gray and black nose triangles, as shown.

4.1 Base assembly

Parts to required to build base assembly

4.2 Connect the red 4-pin triangle to the red 16-pin flat.

4.3 Connect the blue 8-pin flat to the gray 12-pin flat.

4.4 Connect the gray 4-pin handle to the other end of the gray 12-pin flat

4.5 Connect the black and gray 4-pin flats to either end of the red 12-pin flat

4.6 Assemble base assembly and seat as shown

5.1 Tail Assembly

Parts required to build tail assembly

5.2 Assemble red 6-pin triangle to the red 20-pin flat as shown

5.3 Assemble the red 2-pin rectangles (2) and the red 2-pin rectangle with handle (1) to the red 4-pin square as shown

5.4 Assemble the jet as shown by placing the 2 orange discs to the black mount.

5.5 Assemble the tail by placing the 3 components together as shown

6.1 Main Rotor Assembly

Parts required to build the main rotor assembly

6.2 Layout the yellow ten pin rotor blades with the 6-pin rotor blades as shown.

6.3 Connect the 2x2 rotating piece on the top of the 2x2 red block.

6.4 Attach the four rotor blades to the top of the 2x2 rotating piece.

6.5 Connect the white round 4-pin piece to the center of the rotors.

7.1 Tail Rotor Assembly

7.2 Layout the four, 4-pin flat pieces for the tail rotor as shown.

7.3 Place the white 1-pin triangle behind the grey three pin triangle, and place the red 2-pin triangle on top.

7.4 Connect the yellow 2-pin upside down triangle to the bottom of the previous piece.

7.5 Attach the red 2-pin center connecting piece on the one end of the white elbow.

7.6 Attach the black 2-pin center connecting piece on one end of the black elbow.

7.7 Place the center connecting end of the previous two parts to the bottom of the grey 3-pin triangle.

7.8 Attach the black round 4-pin piece on the top of the tail rotors and the rotating piece to the bottom of the rotors.

7.9 Connect the rotors to the unused end of the elbows as shown.

8.1 Cockpit Assembly

8.2 Layout each piece as shown.

8.3 Connect the 3 red 4-pin blocks, the black 4 pin piece, and the red 8 pin piece directly on top of each other as shown.

8.4 Connect the red 2-pin handle with the red 2-pin block to the bottom of the 4-pin black block along with the white windows as shown.

8.5 Connect the two red 2-pin blocks together and attach to the underside of the black 4-pin block along with the red window as shown.

8.6 Attach the 3 sides together by placing the red 8-pin piece on the top.

8.7 Place the white 8-pin piece on the top as shown.

8.8 Using the flat blue piece attach it to the top to complete the roof of the cockpit.

9.1 Final Assembly

9.2 Attach the nose assembly to the base assembly, as shown.

9.3 Attach newly created nose and base assembly to the skid assembly as shown

9.4 Attach cockpit assembly to the rest of the supercopter as shown

9.5 Attach the tail assembly to the back of the supercopter as shown

9.6 Attach the tail rotor assembly to the end of tail assembly

9.7 Attach the main rotor assembly to the top of the supercopter

, you now have finished the Lego supercopter! Now Lego man will be able to fight

crime in Lego town.