peppers catalogue glands

7/25/2019 Peppers Catalogue Glands

1/28

Peppers Cable Glands Product Catalogue

www.cableglands.com


2/28

For over 65 years, Peppers Cable Glands has been involved in the manufacture and

sale of Cable Glands, giving the company a wealth of experience and expertise

within the industry.

Peppers Cable Glands LimitedStanhope Road, Camberley, Surrey, GU15 3BT United Kingdom

Telephone: +44 (0) 1276 64232 Facsimile: +44 (0) 1276 691752

Email: [email protected] Website: www.cableglands.com

Introduction to Peppers

Peppers ...a refreshing attitude to manufacturing

Tel: +44 (0) 1276 64232 Fax: +44 (0) 1276 691752 Email: [email protected]

www.cableglands.com

Operating from its UK base in Surrey, Peppers Cable Glands runs a

satellite manufacturing system using group companies situated in

the North of England. This provides an assured supply chain and

when paired with their global distribution network, results in on-time

deliveries. We believe quick deliveries are only part of the service. Its

all about the complete experience. We aim to give our customers

excellent service not just in terms of our quick deliveries but from

when the initial contact is made throughout the quotation, ordering

and expediting process.

Peppers customers can be sure that they are getting accurate advice,

and if we are unable to meet your requirements, we will inform you.

We dont bend the truth to secure orders. Peppers simply does not

promise what it cannot deliver.

Peppers operates a quality management system, approved to

ISO 9001:2008 and an Environmental System approved to

ISO 14001:2004. All new employees are trained to recognise what it

takes to meet these standards and sta assessments are undertaken

regularly to ensure that the highest levels of customer service are

maintained at all times.

Peppers has an extensive range of

international approvals incorporating

ATEX, IECEx, UL, CSA, GOST, INMETRO &

NEPSI as well as marine type approvals by

ABS (American Bureau of Shipping), RMRS (Russian

Maritime) & Lloyds Register. Our range of approved

products are designed and tested for use in Ex d, Ex e, Ex nR

and Ex t hazardous area protection concepts.

Peppers range of glands incorporate some unique engineering

features. The CR gland for armoured cable features a single

orientation clamping system, CROCLOCK allowing the clamping of

all armour types with no mistakes being possible during installation.

The advertising slogan No reversible Components No Mistakes

sums up this benet. Due to ingenious design features Deluge is

achieved without the use of additional sealing devices.

Peppers barrier glands incorporate unique features that reduce

installation times by using the Peppers T-1000 compound, which

enables the conductors to be terminated within the equipment after

one hour. At four hours, the compound chamber may be inspected

and the equipment can be energized. Our innovative barrier chamber

provides a cable acceptance that is on average 17% larger than other

barrier gland designs allowing the use of smaller glands thereby

signicantly reducing cost.

Glands can be supplied in various materials including brass,

aluminium, stainless steel and polyamide. We oer plating options

for corrosion protection, including nickel, tin and zinc. Peppers also

supply accessories, which include a comprehensive range of certied

thread adaptors, reducers, stopping plugs and breather drains.

Peppers Engineering Team are constantly striving to improve the

quality of our range whilst continually working to design and

develop new and innovative products.


3/28




Cable Gland Overview Guide

Elastomeric Seal Cable GlandsFor use in Zone 1, Zone 2, Zone 21, Zone 22, Gas Groups IIA, IIB and IIC

Gland

Type

Outer

Seal

Inner

Seal

Lead

Option

Armour

ClampCertication Protection Concepts / Methods IP Rating Page No.

CR**** CROCLOCKATEX - IECEx - GOST - CSA - NEPSI - INME TRO Ex d - Ex e - Ex nR - Ex tD A21 IP66 - IP68

NEMA 4X - DELUGE1.1.0

ABS - LLOYDS - RMRS Class I Div 2 Gr. ABCD, Class II Gr. EFG, Class III

E****F* ATEX - IECEx - GOST - CSA - NEPSI - INME TRO Ex d - Ex e - Ex nR - Ex tD A21 IP66 - IP68

NEMA 4X1.2.0


C****E* ATEX - IECEx - GOST - CSA - NEPSI - INMETRO Ex e - Ex tD A21

IP66 - NEMA 4X 1.3.0ABS - LLOYDS - RMRS Class I Div 2 Gr. ABCD, Class II Gr. EFG, Class III

A*L*F ATEX - IECEx - GOST - CSA - NEPSI - INME TRO Ex d - Ex e - Ex nR - Ex tD A21 IP66 - IP68



A*LDS*F ATEX - IECEx - GOST - CSA - NEPSI - INME TRO Ex d - Ex e - Ex nR - Ex tD A21 IP66 - IP68



A*LCF*F ATEX - IECEx - GOST - CSA - NEPSI - INME TRO Ex d - Ex e - Ex nR - Ex tD A21 IP66 - IP68



Flat Cable Glands & Nylon Cable GlandsFor use in Zone 1, Zone 2, Zone 21, Zone 22, Gas Groups IIA, IIB and IIC

GlandType

OuterSeal

InnerSeal

LeadOption

ArmourClamp

Certication Protection Concepts / Methods IP Rating Page No.

E8X*F ATEX - IECEx - GOST - NEPSI - INMETRO

Ex d - Ex e - Ex nR - Ex tD A21 IP66 - IP68 3.1.0ABS - LLOYDS - RMRS

A8*F ATEX - IECEx - GOST - NEPSI - INMETRO

Ex d - Ex e - Ex nR - Ex tD A21 IP66 - IP68 3.1.0ABS - LLOYDS - RMRS

PF

(Nylon) ATEX - IECEx - GOST - UL - CSA - VDE

Ex e - Ex tD A21 IP66 - IP68 3.2.0LLOYDS

Barrier GlandsFor use in Zone 1, Zone 2, Zone 21, Zone 22, Group I Mining, Gas Groups IIA, IIB and IIC and Dust Groups IIIA, I IIB, IIIC

Gland

Type

Outer

Seal

Inner

Seal

Lead

Option

Armour


CR-C*** COMPOUNDCROCLOCKATEX - IECEx - GOST - CSA - NEPSI - INMETRO Ex d - Ex e - Ex nR - Ex ta IP66 - IP68



CR-X*COMPOUND

ATEX - IECEx - GOST - CSA - NEPSI - INMETRO Ex d - Ex e - Ex nR - Ex ta IP66 - IP68

NEMA 4X - DELUGE 4.2.0ABS - LLOYDS - RMRS Class I Div 2 Gr. ABCD, Class II Gr. EFG, Class III

CR-U* COMPOUNDATEX - IECEx - GOST - CSA - NEPSI - INMETRO Ex d - Ex e - Ex nR - Ex ta IP66 - IP68



CR-S** COMPOUNDATEX - IECEx - GOST - CSA - NEPSI - INMETRO Ex d - Ex e - Ex nR - Ex ta IP66 - IP68



Barrier GlandsFor use in Class I Div 1 & 2, Zone 1, Zone 2, Zone 21, Zone 22, Group I Mining, Gas Groups IIA, IIB and IIC and Dust Groups IIIA, IIIB, IIIC

Gland

Type

Outer

Seal

Inner

Seal

Lead

Option

Armour


UL-C** COMPOUND CROCLOCKUL - ATEX - IECEx - GOST Ex d - Ex e - Ex nR - Ex ta IP66 - IP68


ABS - LLOYDS Class I Div 1 ABCD

UL-U* COMPOUND UL - ATEX - IECEx - GOST Ex d - Ex e - Ex nR - Ex ta IP66 - IP68


ABS - LLOYDS Class I Div 2 ABCD

Industrial Cable GlandsGlandType

Outer

Seal

Inner

Seal

Lead

Option

Armour

ClampFor Use In Compliance IP Rating Page No.

A*L* Safe Applications EN 50262 & BS6121IP66 - IP68

DELUGE5.1.0

E***** Safe Applications EN 50262 & BS6121 IP66 - IP68 5.2.0

C***** Safe Applications EN 50262 & BS6121 IP66 5.3.0

Accessories

Cable Gland Accessories: Locknuts - Earthtags - IP Washers - Serrated Washers - Shrouds 7.4.1

Enclosure Accessories: Stopping (Blanking) Plugs - Adaptors and Reducers - Breather Drains 7.5.1

Technical Information

Entry Thread Reference Tables - Adaptor / Reducer Size Options TR-1

CR-S*M... A New Concept - Peppers T1000 Sealing Compound - Bi-Metallic Corrosion - I nstallation - Material Specication - Thread Standard/Gauging TR-2

IP Information - Temperature Classications - Integral Earth Options - Is a Barrier Gland Required? TR-3

www.cableglands.com


4/28




www.cableglands.comPage1.1.0 2011 Catalogue Issue 2

www.cableglands.com

CR type glands, certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas GroupsIIA, IIB and IIC. They provide a controlled Ex d & IP displacement seal on the cable inner sheath minimising damage to cables that exhibit cold ow characteristics, an

environmental seal on the outer sheath and CROCLOCK, a unique non reversible multi clamping system for wire (W), braid (X) and tape (Z) armoured cables. The gland

maintains IP66 & IP68 to 25 metres and is deluge proof without the use of an additional seal or deluge boot. It is supplied with an IP O-ring seal as standard on metric

entry threads. Options are available for use with lead sheath, LSOH cables and extreme temperature applications.

Notes:* Gland size does not necessarily equate to the entry thread size.* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads. IP O-rings cannot be used in conjunction with a at IP washer.* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our Thread Reference Tables for specic dimensions.* Where glands are tted into non-metallic Ex e enclosures they must be included within the earth circuit of the system.* The user should seek expert advice if intending to combine ammable and combustible dust in one environment/installation.* Assembly instructions must be read prior to installation and adhered to in full.* Peppers supply cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They

usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length. Peppers will not be held responsiblefor clients installations where this has not been taken into account.

* To maintain the specied IP rating, clearance holes must be in accordance with EN 50262 Table 1 and the entry device should be suitably secured.* The CR-O version is not suitable for Ex nR applications.* All gland kits supplied with silicone seals will include a PTFE IP washer in order to maintain the temperature range.

Cable Gland Type CR(featuring CROCLOCK) Ex d : Ex e : Ex nR : Ex tD A21 : IP66 : IP68

C R * 1 B *

D 2 S R

O 3

4

Including type Nos:

Example Part Numbering

(See below for details)CR-1BCK1/NP/20/050NPT

CR Type of gland featuring CROCLOCK, single orientation clamping1 Neoprene Seals (1) - Silicone (3) - Neoprene/Lead (2) - Silicone/Lead (4)

B Brass (B) - Stainless Steel (S)

Options

R Reduced Bore Seal

C PVC Shroud (C) - PCP Shroud (P) - LSOH Shroud (3)

K or V Locknut, Earth Tag & Nylon (K) or Fibre (V) IP Washer

S Including Serrated Washer

1 Quantity per kit

NP Nickel Plated (NP) - Zinc Plated (ZP)

20 Gland shell size

050NPT 1/2NPT Entry Thread

Optional

Accessories Locknut Brass (ACBLN) / Stainless Steel (ACSLN)

Earth tag Brass (ACBET) / Stainless Steel (ACSET)

IP Washers Nylon (ACNSW) / Fibre (ACFSW) / PTFE (ACPSW)

Serrated Washer Stainless Steel (ACSSW)

Shrouds PVC (ACSPVC) / PCP (ACSPCP) / LSOH (ACSSIO)

Variations: CR-O Omission of Inner Seal (Ex e & Ex tD) (IP66)

CR-D Omission of Outer Seal

CABLE GLAND SELECTION TABLE

Gland

Size

Entry Thread Size ISO Thread

Length

[B]

Cable Acceptance Details Armour

Acceptance

Range

Max

Protrusion

Length

Dimensions/Weight (Metric Versions)Shroud

SizeInner Sheath [C] Outer Sheath [D] Reduced [D] Across

Flats

Across

Corners [A]

Weight

KgsMetric NPT Min Max Min Max Min Max

16 M20 x 1.5 1/2 or 3/4 16 3.4 8.4 9.0 13.5 6.7 10.3 0.15-1.25 78 25.4 28.0 0.178 EL24

20S M20 x 1.5 1/2 or 3/4 16 7.2 11.7 12.9 16.0 9.4 12.5 0.15-1.25 78 25.4 28.0 0.173 EL24

20 M20 x 1.5 1/2 or 3/4 16 9.4 14.0 15.5 21.1 12.0 17.6 0.15-1.25 78 30.0 33.0 0.233 EL30

25 M25 x 1.5 3/4 or 1 16 13.5 20.0 20.3 27.4 16.8 23.9 0.15-1.60 90 38.0 41.4 0.416 EL38

32 M32 x 1.5 1 or 1 1/4 16 19.5 26.3 26.7 34.0 23.2 30.5 0.15-2.00 105 46.0 50.6 0.772 EL46

40 M40 x 1.5 1 1/4 or 1 1/2 16 23.0 32.2 33.0 40.6 28.6 36.2 0.20-2.00 113 55.0 60.5 1.093 EL55

50S M50 x 1.5 1 1/2 or 2 16 28.1 38.2 39.4 46.7 34.8 42.4 0.20-2.50 125 65.0 71.5 1.400 EL65

50 M50 x 1.5 2 16 33.1 44.1 45.7 53.2 41.1 48.5 0.30-2.50 125 65.0 71.5 1.255 EL65

63S M63 x 1.5 2 or 2 1/2 19 39.2 50.1 52.1 59.5 47.5 54.8 0.30-2.50 125 80.0 88.0 2.550 EL8063 M63 x 1.5 2 1/2 19 46.7 56.0 58.4 65.8 53.8 61.2 0.30-2.50 125 80.0 88.0 2.104 EL80

75S M75 x 1.5 2 1/2 or 3 19 52.1 62.0 64.8 72.2 60.2 68.0 0.30-2.50 131 90.0 99.0 2.916 EL90

75 M75 x 1.5 3 19 58.0 68.0 71.1 78.0 66.5 73.4 0.30-2.50 131 90.0 99.0 2.315 EL90

80 M80 x 2 3 or 3 1/2 25 62.2 72.0 77.0 84.0 71.9 79.4 0.45-3.15 170 104.0 115.2 4.953 EL104

80H M80 x 2 3 or 3 1/2 25 62.2 72.0 79.6 90.0 75.0 85.4 0.45-3.15 170 104.0 115.2 4.953 EL104

85 M85 x 2 3 or 3 1/2 25 69.0 78.0 79.6 90.0 75.0 85.4 0.45-3.15 170 104.0 115.2 4.070 EL104

90 M90 x 2 3 1/2 or 4 25 74.0 84.0 88.0 96.0 82.0 91.4 0.45-3.15 170 114.0 125.7 5.129 EL114

90H M90 x 2 3 1/2 or 4 25 74.0 84.0 92.0 102.0 87.4 97.4 0.45-3.15 170 114.0 125.7 5.129 EL114

100 M100 x 2 3 1/2 or 4 25 82.0 90.0 92.0 102.0 87.4 97.4 0.45-3.15 170 114.0 125.7 4.368 EL114

110 M110 x 2 4 25 92.0 102.0 104.0 117.0 - - 0.45-3.15 165 135.0 148.5 7.327 -

All dimensions in mm

Compliance

Standard:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1

IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1 & IEC 60529

Certification: ATEX II 2 GD Ex d IIC / Ex e II / Ex tD A21

II 3 GD Ex nR II

IECEx Ex d IIC / Ex e II / Ex tD A21

GOST-R Ex d IICU / Ex e IIU

CSA Ex d IIC / Ex e II Class I Zone 1

Class I Division 2, Groups A, B, C & D

Class II Division 2, Groups E, F & G

Class III, Enclosure Types 3, 4 & 4X

NEPSI Ex d IIC / Ex e II

INME TRO BR - Ex d IIC / Ex e II / Ex nR II / Ex tD A2 1

ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9

LLOYDS Enclosure Systems (Part 1B)

RMRS Part XI of Rules for sea-going ships (ed.2008)

Certificate No. ATEX BAS 01ATEX2271X & SIRA 09ATEX1221X

IECEx SIR 07.0099X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06189X

INMETRO NCC 5877/09 X

ABS 09-LD463991-PDA

LLOYDS 10/00056

RMRS 09.00784.011

IP Rating: IP66 & IP68 (25 metres - 30 minutes), NEMA 4X & DTS01 1991

OperatingTemperature: Neoprene Seals -20

o

C to +85

o

CSilicone Seals -60oC to +180oC

Materials: Brass or Stainless Steel

Plating: Nickel - Zinc


5/28




www.cableglands.com2011 Catalogue Issue 2

Page1.2.0

E 1 W B * F *

2 X S IE R

3 Z

4

Part Numbers:

Cable Gland Type E - (Double Compression for Armoured Cables) Ex d : Ex e : Ex nR : Ex tD A21 : IP66 : IP68

Notes:* Gland size does not necessarily equate to the entry thread size. Gland size 16 is also available with an M16 x 1.5 entry thread.* The IP O-ring seal option is only available on metric entry threads. IP washers can be supplied for tapered entry threads.* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our Thread Reference Tables for specic dimensions.* Where glands are tted into non-metallic Ex e enclosures they must be included within the earth circuit of the system.* The user should seek expert advice if intending to combine ammable and combustible dust in one environment/installation.

* Assembly instructions must be read prior to installation and adhered to in full.* Peppers supplies cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They


* To maintain the specied IP rating, clearance holes must be in accordance with EN 50262 Table 1 and the entry device should be suitably secured.* For gland size 20 the silicone inner seal has a minimum diameter of 11.0mm and NOT 6.7mm* All gland kits supplied with silicone seals will include a PTFE IP washer in order to maintain the temperature range.

E type double compression glands, certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22

and in Gas Groups IIA, IIB and IIC. They provide a controlled Ex d & IP seal on the cable inner sheath, an environmental seal on the outer sheath and a detachable armour

specic clamping system for wire (W), braid (X) or tape (Z) armoured cables. The gland has been tested to IP66 and IP68 to 35 metres and is available with an IP O-ring

seal on metric entry threads. The IE version allows the gland to be used with HV cables where the fault load is greater than 10.4kA and options are available for use with

lead sheath, LSOH cables and extreme temperature applications.

Compliance EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1

Standard: IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1 & IEC 60529


II 3 GD Ex nR II








INMET RO BR - Ex d IIC / Ex e II / Ex nR II / E x tD A21

ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9


RMRS Par t XI of Rules for sea-going ships (ed.2008)

Certificate No. ATEX SIRA 01ATEX1271X & SIRA 09ATEX1221X

IECEx SIR 07.0097X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06187X


ABS 09-LD463991-PDA

LLOYDS 10/00056

RMRS 09.00784.011

IP Rating: IP66 & IP68 (35 metres - 7 days), NEMA 4X

Operating Neoprene Seals -20C to +85CTemperature: Silicone Seals -60C to +180C




(See below for details)E1WBFCK1/NP/20/050NPT

E Type of gland featuring armour specic clamping1 Neoprene Seals (1) - Silicone (3) - Neoprene/Lead (2) - Silicone/Lead (4)

W SWA (W) / SWB (X) or STA (Z)

B Brass (B) / Stainless Steel (S)

IE Integral Earth (see page TR-3)

F Multiple Certication

Options

R Reduced Bore Seal




1 Quantity per kit


20 Gland shell size


Op

tional

Acce

ssories Locknut Brass (ACBLN) / Stainless Steel (ACSLN)


IP Washers Nylon (ACNSW) / Fi bre (ACFSW)



Variations: D****F Omission of Outer Seal


Gland

Size


Length

[B]

Cable Acceptance DetailsArmour Acceptance Range Max

Protrusion

Length

Dimensions/Weight (Metric)Shroud

SizeI nner Shea th [C] Out er Shea th [D] Reduced [D] Across

Flats

Across

Corners [A]

Weight

KgsMetric NPT Min Max Min Max Min Max W XZ

16 M20 x 1.5 1/2 or 3/4 16 4.0 8.4 8.4 13.5 4.9 10.3 0.9 0.15-0.35 58 24.0 26.5 0.154 L24

20S M20 x 1.5 1/2 or 3/4 16 8.0 11.7 12.9 16.0 9.4 12.5 0.90-1.25 0.15-0.35 58 24.0 26.5 0.125 L24

20 M20 x 1.5 1/2 or 3/4 16 6.7 14.0 15.5 21.1 12.0 17.6 0.90-1.25 0.15-0.50 58 30.0 33.0 0.180 L30

25 M25 x 1.5 3/4 or 1 16 13.0 20.0 20.3 27.4 16.8 23.9 1.25-1.60 0.15-0.50 58 38.0 41.4 0.256 L38

32 M32 x 1.5 1 or 1 1/4 16 19.0 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.15-0.55 65 46.0 50.6 0.400 L46

40 M40 x 1.5 1 1/4 or 1 1/2 16 25.0 32.2 33.0 40.6 28.6 36.2 1.60-2.00 0.20-0.60 72 55.0 60.5 0.649 L55

50S M50 x 1.5 1 1/2 or 2 16 31.5 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.20-0.60 73 65.0 71.5 0.940 L65

50 M50 x 1.5 2 16 36.5 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 73 65.0 71.5 0.707 L65

63S M63 x 1.5 2 or 2 1/2 19 42.5 50.1 52.1 59.5 47.5 54.8 2.5 0.30-0.80 76 80.0 88.0 1.369 L80

63 M63 x 1.5 2 1/2 19 49.5 56.0 58.4 65.8 53.8 61.2 2.5 0.30-0.80 76 80.0 88.0 1.123 L80

75S M75 x 1.5 2 1/2 or 3 19 54.5 62.0 64.8 72.2 60.2 68.0 2.5 0.30-1.00 82 90.0 99.0 1.660 L90

75 M75 x 1.5 3 19 60.5 68.0 71.1 78.0 66.5 73.4 2.5 0.30-1.00 82 90.0 99.0 1.310 L90

80 M80 x 2 3 or 3 1/2 25 62.2 72.0 77.0 84.0 71.9 79.4 3.15 0.45-1.00 110 104.0 115.2 2.718 L104

80H M80 x 2 3 or 3 1/2 25 62.2 72.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 110 104.0 115.2 2.718 L104

85 M85 x 2 3 or 3 1/2 25 69.0 78.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 110 104.0 115.2 2.326 L104

90 M90 x 2 3 1/2 or 4 25 74.0 84.0 88.0 96.0 82.0 91.4 3.15 0.45-1.00 110 114.0 125.7 2.852 L114

90H M90 x 2 3 1/2 or 4 25 74.0 84.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 110 114.0 125.7 2.852 L114

100 M100 x 2 3 1/2 or 4 25 82.0 90.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 110 114.0 125.7 2.496 L114



6/28




www.cableglands.com 2011 Catalogue Issue 2

Page 1.3.0

Part Numbers:

Cable Gland Type C -(Single Compression for Armoured Cables) Ex e : Ex tD A21 : IP66

C 1 W B * E *

3 X S IE R

Z

C type single compression glands, certied Increased Safety Ex e are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Group II. The gland is suitable for

cables that exhibit cold ow characteristics, whilst providing an IP66 environmental seal on the cable outer sheath and a detachable armour specic clamping system

for wire (W ), braid (X) or tape (Z) armoured cables. The IE version allows the gland to be used with HV cables where the fault load is greater than 10.4kA and options are

available for use with LSOH cables and extreme temperature applications.

Notes:

* Gland size does not necessarily equate to the entry thread size. Gland size 16 is also available with an M16 x 1.5 entry thread.

* The IP O-ring seal option is only available on metric entry threads. IP washers can be supplied for tapered entry threads.

* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our "Thread Reference Tables" for specic dimensions.

* Where glands are tted into non-metallic Ex e enclosures they must be included within the earth circuit of the system.

* The user should seek expert advice if intending to combine ammable and combustible dust in one environment/installation.

* Assembly instructions must be read prior to installation and adhered to in full.

* Peppers supplies cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards.

They usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length. Peppers will not be held

responsible for clients' installations where this has not been taken into account.

* To maintain the specied IP rating, clearance holes must be in accordance with EN 50262 Table 1 and the entry device should be suitably secured.

* All gland kits supplied with silicone seals will include a PTFE IP washer in order to maintain the temperature range.


Gland

Size

Entry Thread SizeISO

Thread

Length

[B]

Cable Acceptance DetailsArmour Acceptance Range Nominal

Protrusion

Length [L]

Dimensions/Weight (Metric) Metric Thread

Shroud

Size

Inner Sheath [C] Outer Sheath [D] Reduced [D] Across

Flats

Across

Corners [A]

Weight

KgsMetric NPT Min Max Min Max Min Max W XZ

16 M20 x 1.5 1/2" or 3/4" 16 - 8.4 8.4 13.5 4.9 10.0 0.9 0.15-0.35 60 24.0 26.5 0.139 L24

20S M20 x 1.5 1/2" or 3/4" 16 - 11.7 12.9 16.0 9.4 12.5 0.90-1.25 0.15-0.35 60 24.0 26.5 0.125 L24

20 M20 x 1.5 1/2" or 3/4" 16 - 14.0 15.5 21.1 12.0 17.6 0.90-1.25 0.15-0.50 60 30.0 33.0 0.180 L30

25 M25 x 1.5 3/4" or 1" 16 - 20.0 20.3 27.4 16.8 23.9 1.25-1.60 0.15-0.50 60 37.6 41.4 0.252 L38

32 M32 x 1.5 1" or 1 1/4" 16 - 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.15-0.55 65 46.0 50.6 0.408 L46

40 M40 x 1.5 1 1/4" or 1 1/2" 16 - 32.2 33.0 40.6 28.6 36.2 1.60-2.00 0.20-0.60 75 55.0 60.5 0.642 L55

50S M50 x 1.5 1 1/2" or 2" 16 - 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.20-0.60 75 65.0 71.5 0.947 L65

50 M50 x 1.5 2" 16 - 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 75 65.0 71.5 0.716 L65

63S M63 x 1.5 2" or 2 1/2" 19 - 50.1 52.1 59.5 47.5 54.8 2.5 0.30-0.80 75 80.0 88.0 1.377 L80

63 M63 x 1.5 2 1/2" 19 - 56.0 58.4 65.8 53.8 61.2 2.5 0.30-0.80 75 80.0 88.0 1.073 L80

75S M75 x 1.5 2 1/2" or 3" 19 - 62.0 64.8 72.2 60.2 68.0 2.5 0.30-1.00 85 90.0 99.0 1.661 L90

75 M75 x 1.5 3" 19 - 68.0 71.1 78.0 66.5 73.4 2.5 0.30-1.00 85 90.0 99.0 1.322 L90

80 M80 x 2 3" or 3 1/2" 25 - 72.0 77.0 84.0 71.9 79.4 3.15 0.45-1.00 110 104.0 115.2 2.874 L104

80H M80 x 2 3" or 3 1/2" 25 - 72.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 110 104.0 115.2 2.874 L104

85 M85 x 2 3" or 3 1/2" 25 - 78.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 110 104.0 115.2 2.515 L104

90 M90 x 2 3 1/2" or 4" 25 - 84.0 88.0 96.0 82.0 91.4 3.15 0.45-1.00 110 114.0 125.7 3.117 L114

90H M90 x 2 3 1/2" or 4" 25 - 84.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 110 114.0 125.7 3.117 L114

100 M100 x 2 3 1/2" or 4" 25 - 90.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 110 114.0 125.7 2.707 L114


Compliance

Standard:

EN 60079-0, EN 60079-7, EN 60079-7, EN 61241-0, EN 61241-1

IEC 60079-0, IEC 60079-7, IEC 61241-0, IEC 61241-1 & IEC 60529

Certification: ATEX II 2 GD Ex e II / Ex tD A21

IECEx Ex e II / Ex tD A21

GOST-R Ex e IIU

CSA Ex e II Class I Zone 1




NEPSI Ex e II

INMETRO BR - Ex e II / Ex tD A21

ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9



Certificate No. ATEX SIRA01ATEX1271X

IECEx SIR 07.0097X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06187X


ABS 09-LD463991-PDA

LLOYDS 10/00056

RMRS 09.00784.011

IP Rating: IP66 & NEMA 4X

Operating

Temperature:

Neoprene Seals -20C to +85C

Silicone Seals -60C to +180C




(See below for details)C1WBECK1/NP/20/050NPT

C Type of gland featuring armour specic clamping

1 Neoprene Seals (1) - Silicone (3)

W SWA (W) / SWB (X) or STA (Z)


IE Integral Earth (see page TR-3)

E Ex e Certication

Options

R Reduced Bore Seal




1 Quantity per kit


20 Gland shell size


Option

al

Accesso

ries Locknut Brass (ACBLN) / Stai nless Steel (ACSLN)


IP Washers Nylon (ACNSW) / Fi bre (ACFSW)




7/28





Page2.1.0

Part Numbers: A 1 L B F2 S

3 A

4

Cable Gland Type A - (Single Compression for any Cable) Ex d : Ex e : Ex nR : Ex tD A21 : IP66 : IP68

Compliance

Standard:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1



II 3 GD Ex nR II








INMETRO BR - Ex d IIC / Ex e II / Ex nR II / Ex tD A21

ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9




IECEx SIR 07.0096X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06186X


ABS 09-LD463991-PDA

LLOYDS 10/00056

RMRS 09.00784.011


Operating

Temperature:

Neoprene Seals -20C to +85C

Silicone Seals -60C to +180C

Materials: Brass, Stainless Steel or Aluminium


A type glands, certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas GroupsIIA, IIB and IIC. Commonly referred to as stung glands they provide a controlled pull resistant environmental displacement seal on the cable outer sheath, minimising

damage to cables that exhibit cold ow characteristics. The gland maintains IP66 & IP68 to 25 metres and is deluge proof without the use of an additional seal or deluge

boot. It is supplied with an IP O-ring seal as standard on metric entry threads. Options are available for use with LSOH cables and extreme temperature applications.


Gland

Size


Length

[B]

Cable Acceptance DetailsNominal

Protrusion

Length [L]

Dimensions/Weight (Metric Versions)Metric Thread

Shroud

Size

Outer Sheath [D] Across

Flats

Across

Corners [A]

Weight

KgsMetric NPT Min Max

16 M20 x 1.5 1/2 or 3/4 16 4.0 8.4 33 25.4 28.0 0.078 L24

20S M20 x 1.5 1/2 or 3/4 16 7.2 11.7 33 25.4 28.0 0.101 L24

20 M20 x 1.5 1/2 or 3/4 16 9.4 14.0 33 30.0 33.0 0.127 L30

25 M25 x 1.5 3/4 or 1 16 13.5 20.0 33 37.6 41.4 0.166 L38

32 M32 x 1.5 1 or 1 1/4 16 19.5 26.3 33 46.0 50.6 0.244 L46

40 M40 x 1.5 1 1/4 or 1 1/2 16 23.0 32.2 37 55.0 60.5 0.396 L55

50S M50 x 1.5 1 1/2 or 2 16 28.1 38.2 37 65.0 71.5 0.558 L65

50 M50 x 1.5 2 16 33.1 44.1 37 65.0 71.5 0.438 L65

63S M63 x 1.5 2 or 2 1/2 19 39.2 50.1 37 80.0 88.0 0.832 L80

63 M63 x 1.5 2 1/2 19 46.7 56.0 37 80.0 88.0 0.664 L80

75S M75 x 1.5 2 1/2 or 3 19 52.1 62.0 37 90.0 99.0 0.924 L90

75 M75 x 1.5 3 19 58.0 68.0 37 90.0 99.0 0.714 L90

80 M80 x 2 3 or 3 1/2 25 62.2 72.0 50 104.0 115.2 1.514 L104

85 M85 x 2 3 or 3 1/2 25 69.0 78.0 50 104.0 115.2 1.332 L104

90 M90 x 2 3 1/2 or 4 25 74.0 84.0 50 114.0 125.7 1.622 L114

100 M100 x 2 3 1/2 or 4 25 82.0 90.0 50 114.0 125.7 1.523 L114


Notes:

* Gland size does not necessarily equate to the entry thread size. Gland size 16 is also available with an M16 x 1.5 entry thread.* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.* Please ensure that the IP O-ring is not used in conjunction with a at IP washer.* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our Thread Reference Tables for specic dimensions.* Where glands are tted into non-metallic Ex e enclosures they must be included within the earth circuit of the system..

* The user should seek expert advice if intending to combine ammable and combustible dust in one environment/installation.* Assembly instructions must be read prior to installation and adhered to in full.* Peppers supplies cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They

usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length. Peppers will not be held responsib lefor clients installations where this has not been taken into account.




(See below for details)A2LBFCK1/NP/20/050NPT

A Type of gland featuring controlled displacement sealing

2 Neoprene Seals (2) - Silicone (3) - Neoprene/Lead (1) - Silicone/Lead (4)

L Peppers Lightweight Design

B Brass (B) / Stainless Steel (S) / Aluminium (A)


Options


K or V Locknut & Nylon (K) or Fibre (V) IP Washer

T Including Earth Tag


1 Quantity per kit


20 Gland shell size


Optional

Accessories

Lock nut Brass (ACBLN) / Stainless Steel (ACSLN)

Earth tag Brass (ACBET) / Stainless Steel (ACSET)IP Washers Nylo n (ACNSW ) / Fibre (ACFSW )

Serrated Washers Stainless Steel (ACSSW)



8/28





Page2.2.0

Part Numbers: A 1 L DS B F2 S

3 A

4

Cable Gland Type A*LDS -(Double Compression for any Cable) Ex d : Ex e : Ex nR : Ex tD A21 : IP66 : IP68

Compliance

Standard:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1



II 3 GD Ex nR II








INME TRO BR - Ex d IIC / Ex e II / Ex nR II / Ex tD A2 1ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9




IECEx SIR 07.0096X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06186X


ABS 09-LD463991-PDA

LLOYDS 10/00056

RMRS 09.00784.011


OperatingTemperature:

Neoprene Seals -20C to +85CSilicone Seals -60C to +180C



A*LDS type glands, certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas

Groups IIA, IIB and IIC. Commonly referred to as double seal stung glands they provide two controlled pull resistant environmental displacement seals on the cable

outer sheath, minimising damage to cables that exhibit cold ow characteristics. The gland maintains IP66 & IP68 to 25 metres and is deluge proof without the use of

an additional seal or deluge boot. I t is supplied with an IP O-ring seal as standard on metric entry threads. Options are available for use with LSOH cables and extreme

temperature applications.


Gland

Size


Length

[B]

Cable Acceptance DetailsNominal

Protrusion

Length [L]

Dimensions/Weight (Metric Versions)Metric Thread

Shroud

Size


Flats

Across

Corners [A]

Weight


16 M20 x 1.5 1/2 or 3/4 16 4.0 8.4 48 25.4 28.0 0.133 L24

20S M20 x 1.5 1/2 or 3/4 16 7.2 11.7 48 25.4 28.0 0.209 L24

20 M20 x 1.5 1/2 or 3/4 16 9.4 14.0 62 30.0 33.0 0.275 L30

25 M25 x 1.5 3/4 or 1 16 13.5 20.0 62 37.6 41.4 0.408 L38

32 M32 x 1.5 1 or 1 1/4 16 19.5 26.3 62 46.0 50.6 0.408 L46

40 M40 x 1.5 1 1/4 or 1 1/2 16 23.0 32.2 68 55.0 60.5 0.666 L55

50S M50 x 1.5 1 1/2 or 2 16 28.1 38.2 68 65.0 71.5 0.896 L6550 M50 x 1.5 2 16 33.1 44.1 74 65.0 71.5 0.736 L65

63S M63 x 1.5 2 or 2 1/2 19 39.2 50.1 74 80.0 88.0 1.330 L80

63 M63 x 1.5 2 1/2 19 46.7 56.0 74 80.0 88.0 1.114 L80

75S M75 x 1.5 2 1/2 or 3 19 52.1 62.0 74 90.0 99.0 1.493 L90

75 M75 x 1.5 3 19 58.0 68.0 74 90.0 99.0 1.218 L90

80 M80 x 2 3 or 3 1/2 25 62.2 72.0 100 104.0 115.2 2.322 L104

85 M85 x 2 3 or 3 1/2 25 69.0 78.0 100 104.0 115.2 2.107 L104

90 M90 x 2 3 1/2 or 4 25 74.0 84.0 100 114.0 125.7 2.539 L114

100 M100 x 2 3 1/2 or 4 25 82.0 90.0 100 114.0 125.7 2.211 L114


Notes:

* Gland size does not necessarily equate to the entry thread size. Gland size 16 is also available with an M16 x 1.5 entry thread.* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.* Please ensure that the IP O-ring is not used in conjunction with a at IP washer.

* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our Thread Reference Tables for specic dimensions.* Where glands are tted into non-metallic Ex e enclosures they must be included within the earth circuit of the system* The user should seek expert advice if intending to combine ammable and combustible dust in one environment/installation.* Assembly instructions must be read prior to installation and adhered to in full.* Peppers supplies cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They





(See below for details)A2LDSBFCK1/NP/20/050NPT


2 Neoprene Seals (2) - Silicone (3) - Neoprene/Lead (1) - Silicone/Lead (4)


DS Double Sealing



Options


K or V Locknut & Nylon (K) or Fibre (V) IP Washer

T Including Earth Tag


1 Quantity per kit


20 Gland shell size


Optional

Accessor

ies Locknut Brass (ACBLN) / Stainless Steel (ACSLN)

Earth tag Brass (ACBET) / Stainless Steel (ACSET)IP Washers Nylon (ACNSW ) / Fibre (ACFSW )




9/28





Page2.3.0

Cable Gland Type A*LC -(Single Compression Conduit Gland) Ex d : Ex e : Ex nR : Ex tD A21 : IP66 : IP68

Part Numbers: A 2 L CF B F3 CM S

A

Compliance

Standard:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1



II 3 GD Ex nR II








INMETRO BR - Ex d IIC / Ex e II / Ex nR II / Ex tD A21ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9




IECEx SIR 07.0096X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06186X


ABS 09-LD463991-PDA

LLOYDS 10/00056

RMRS 09.00784.011


OperatingTemperature:

Neoprene Seals -20C to +85CSilicone Seals -60C to +180C



A*LCF type glands, certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in GasGroups IIA, IIB and IIC. They provide a controlled pull resistant environmental displacement seal on the cable outer sheath, minimising damage to cables that exhibit

cold ow characteristics. The gland maintains IP66 & IP68 to 25 metres and is deluge proof without the use of an additional seal or deluge boot. It is supplied with

an IP O-ring seal as standard on metric entry threads. The gland features a female conduit connection thread as standard with an option for a male connection thread.


Gland

Size


Thread

Length

[B]

Conduit Connection ThreadCable Acceptance

Nominal

Protrusion

Length [L]

Dimensions/Weight (Metric Versions) Metric

Thread

Shroud

Size


Flats

Across

Corners [A]

Weight

Kgs (Metric)Metric NPT Metric NPT Min Max

16 M20 x 1.5 1/2 or 3/4 16 M20 x 1.5 1/2 or 3/4 4.0 8.4 50 25.4 28.0 0.181 n/a

20S M20 x 1.5 1/2 or 3/4 16 M20 x 1.5 1/2 or 3/4 7.2 11.7 55 25.4 28.0 0.282 n/a

20 M20 x 1.5 1/2 or 3/4 16 M20 x 1.5 1/2 or 3/4 9.4 14.0 55 30.0 33.0 0.390 n/a

25 M25 x 1.5 3/4 or 1 16 M25 x 1.5 3/4 or 1 13.5 20.0 55 37.6 41.4 0.570 n/a

32 M32 x 1.5 1 or 1 1/4 16 M32 x 1.5 1 or 1 1/4 19.5 26.3 55 46.0 50.6 0.570 n/a

40 M40 x 1.5 1 1/4 or 1 1/2 16 M40 x 1.5 1 1/4 or 1 1/2 23.0 32.2 55 55.0 60.5 0.876 n/a

50S M50 x 1.5 1 1/2 or 2 16 M50 x 1.5 1 1/2 or 2 28.1 38.2 58 65.0 71.5 1.196 n/a

50 M50 x 1.5 2 16 M50 x 1.5 2 33.1 44.1 58 65.0 71.5 1.002 n/a

63S M63 x 1.5 2 or 2 1/2 19 M63 x 1.5 2 or 2 1/2 39.2 50.1 58 80.0 88.0 1.822 n/a

63 M63 x 1.5 2 1/2 19 M63 x 1.5 2 1/2 46.7 56.0 58 80.0 88.0 1.556 n/a

75S M75 x 1.5 2 1/2 or 3 19 M75 x 1.5 2 1/2 or 3 52.1 62.0 58 90.0 99.0 1.924 n/a

75 M75 x 1.5 3 19 M75 x 1.5 3 58.0 68.0 58 90.0 99.0 1.786 n/a

80 M80 x 2 3 or 3 1/2 25 M80 x 2 3 or 3 1/2 62.2 72.0 75 104.0 115.2 3.013 n/a

85 M85 x 2 3 or 3 1/2 25 M85 x 2 3 or 3 1/2 69.0 78.0 75 104.0 115.2 2.865 n/a

90 M90 x 2 3 1/2 or 4 25 M90 x 2 3 1/2 or 4 74.0 84.0 75 114.0 125.7 3.000 n/a

100 M100 x 2 3 1/2 or 4 25 M100 x 2 3 1/2 or 4 82.0 90.0 75 114.0 125.7 2.657 n/a


Notes:

* Gland size does not necessarily equate to the entry thread size. Gland size 16 is also available with an M16 x 1.5 entry thread.* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.* Please ensure that the IP O-ring is not used in conjunction with a at IP washer.* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our Thread Reference Tables for specic dimensions.* Where glands are tted into non-metallic Ex e enclosures they must be included within the earth circuit of the system.

* The user should seek expert advice if intending to combine ammable and combustible dust in one environment/installation.* Assembly instructions must be read prior to installation and adhered to in full.* Peppers supplies cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They




(See below for details)A2LCFBF050NPT/NP/20/M20


2 Neoprene Seals (2) - Silicone (3)


CF Female Conduit Connection Thread (CF) / Male Thread Option (CM)



050NPT 1/2NPT Female Conduit Connection Thread


20 Gland shell size

M20 M20 x 1.5 Entry Thread

Optional

Accessories Locknut Brass (ACBLN) / Stainless Steel (ACSLN)


IP Washers Nylon (ACNSW ) / Fibre (ACFSW )



10/28





Page3.1.0

Cable Gland Type *8 - (for Armoured & Unarmoured Flat Cables) Ex d : Ex e : Ex nR : Ex tD A21 : IP66 : IP68

Part Numbers (Armoured):

Part Numbers (Unarmoured):

E 8 X B F

S

A 8 B F

S

E8 & A8 type glands, certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 andin Gas Groups IIA, IIB and IIC. Developed for at cables they provide controlled Ex d, IP sealing and have been tested to IP66 and IP68 to 25 metres. The A8version is designed to accommodate unarmoured cables whilst the E8 features an environmental seal on the outer sheath and a detachable armour specic

clamping system.


(See below for details)

E8XBF/20R/M20

A8BF/20/M20

E Armoured Cables (E) - Unarmoured Cables (A)

8 Silicone for at cables (8)

X Braid Armour (X)




20R Gland shell size

M20 M20 x 1.5 Entry Thread

Optional

Accessories

Lock nut Brass (ACBLN) / St ainless Steel (ACSLN)




Notes:

* Gland size does not necessarily equate to the entry thread size.

* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our Thread Reference Tables for specic dimensions.



* Assembly instructions must be read prior to installation and adhered to in full.* Peppers supplies cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They

usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length. Peppers will not be held responsible

for clients installations where this has not been taken into account.


CABLE GLAND SELECTION TABLE - E8XBF for Armoured Cables

Gland

Size


Length

[B]

Cable Inner Sheath [C] Cable Outer Sheath [D]Armour

Acceptance

Range

Nominal

Protrusion

Length [L]

Dimensions/Weight (Metric Versions) Metric

Thread

Shroud

Size

Width Thickness Width ThicknessAcross

Flats

Across

Corners [A]

Weight

Kgs (Metric)Metric NPT Min Max Min Max Min Max Min Max

20S M20 x 1.5 1/2 or 3/4 16 6.3 11.7 4.0 7.0 7.9 11.7 4.5 7.0 0.10-0.30 58 30.0 33.0 0.196 L30

20R M20 x 1.5 1/2 or 3/4 16 8.1 13.5 5.8 6.2 10.7 16.1 5.4 8.3 0.10-0.30 58 30.0 33.0 0.196 L30

20 M20 x 1.5 1/2 or 3/4 16 10.3 13.5 5.6 9.0 11.0 13.5 4.5 9.0 0.10-0.30 58 30.0 33.0 0.207 L30


CABLE GLAND SELECTION TABLE - A8BF for Unarmoured Cables

Gland

Size


Length

[B]

Cable Outer Sheath [D]

Nominal

Protrusion

Length [L]

Dimensions/Weight (Metric Versions)Metric

Thread

Shroud

Size

Width ThicknessAcross

Flats

Across

Corners [A]

Weight

Kgs (Metric)Metric NPT Min Max Min Max

20S M20 x 1.5 1/2 or 3/4 16 6.3 11.7 4.0 7.0 33 30.0 33.0 0.104 L30

20R M20 x 1.5 1/2 or 3/4 16 8.1 13.5 5.8 6.2 33 30.0 33.0 0.104 L30

20 M20 x 1.5 1/2 or 3/4 16 10.3 13.5 5.6 9.0 33 30.0 33.0 0.103 L30


Compliance

Standard:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1



II 3 G Ex nR II




INMETRO BR - Ex d IIC / Ex e II / Ex nR II / Ex t D A21

ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9




IECEx SIR 05.0020X

GOST-R GB.06.00853

NEPSI GYJ06185X


ABS 09-LD463991-PDA

LLOYDS 10/00056

RMRS 09.00784.011

IP Rating: IP66 & IP68 (25 metres - 30 minutes)

Operating

Temperature:Silicone Seals -60C to +180C

Materials: Brass, Stainless Steel



11/28





Page3.2.0

Cable Gland Type PF - (Single Compression Nylon Gland) Ex e : Ex tD A21 : IP68

Peppers PF type glands, certied Increased Safety Ex e are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Group II. They are manufacturedfrom polyamide and provide a controlled pull resistant displacement seal on the cable outer sheath providing both Ex e & IP protection. The gland has beentested to IP66 & IP68 to 50 metres and is fully compliant with the Ex e standard with no reduced impact restriction. Available in black or blue, in a range of

thread forms complete with an IP at washer on metric entry threads.

Operating M16-M63 -35oC to +95oC

Temperature: M12 -20oC to +80oC

Materials: Polyamide

IP Rating: IP66 & IP68 (50 metres - 30 minutes)

Impact Resistance: 7Nm

Optional Accessories: Nylon Locknut / IP Washers

Compliance EN 60079-0, EN 60079-7, EN 61241-0, EN 61241-1

Standard: IEC 60079-0, IEC 60079-7, IEC 61241-0, IEC 61241-1 & IEC 60529

Certification: ATEX II 2 GD Ex e II / Ex tD A21

IECEx Ex e II / Ex tD A21

GOST-R Ex e IIU

UL ANSI/UL514B

CSA CAN/CSA C22.2

VDE DIN EN 50262 / VDE 0619


Certificate No. ATEX LCIE 07ATEX6082X/02

IECEx LCI 10.0008X

GOST POCC FR M14.B00153

UL E306665

CSA E306665

VDE 131210

LLOYDS 10/00056

Options: Colour - Black / Blue

Industrial Non-Ex version - Omit E from part number


GlandSize

Entry ThreadSize

Nominal

Protrusion[L]

Cable Sealing Range ISO Thread

LengthStandard [E]

Part NumberISO Thread

LengthLong [E]

Part Number Dimensions/Weight

Standard Thread Long Thread Across

Flats

Across

Corners

Weight

KgsMin Max Blue Black Blue Black

12 M12 x 1.5 23.0 4.0 6.5 8.0 PF7421200E PF8021200E 15.0 PF7431200E PF8031200E 15.0 16.5 0.003

16 M16 x 1.5 28.0 5.0 8.0 10.0 PF7421650E PF8021650E 15.0 PF7431650E PF8031650E 19.0 22.0 0.009

16 M16 x 1.5 28.0 5.0 10.0 10.0 PF7421600E PF8021600E 15.0 PF7431600E PF8031600E 22.0 24.5 0.009

20 M20 x 1.5 28.0 7.0 12.0 10.0 PF7422050E PF8022050E 15.0 PF7432050E PF8032050E 24.0 28.0 0.010

20 M20 x 1.5 28.0 10.0 14.0 10.0 PF7422000E PF8022000E 15.0 PF7432000E PF8032000E 27.0 30.3 0.010

25 M25 x 1.5 36.0 10.0 14.0 10.0 PF7422550E PF8022550E 15.0 PF7432550E PF8032550E 33.0 37.0 0.021

25 M25 x 1.5 36.0 12.0 18.0 10.0 PF7422500E PF8022500E 15.0 PF7432500E PF8032500E 33.0 37.0 0.021

32 M32 x 1.5 42.0 16.0 25.0 10.0 PF7423200E PF8023200E 15.0 PF7433200E PF8033200E 42.0 47.0 0.038

40 M40 x 1.5 52.5 22.0 32.0 10.0 PF7424000E PF8024000E 16.0 PF7434000E PF8034000E 53.0 59.8 0.078

50 M50 x 1.5 54.5 28.0 38.5 12.0 PF7425000E PF8025000E 16.0 PF7435000E PF8035000E 60.0 67.6 0.088

63 M63 x 1.5 55.5 40.0 48.0 12.0 PF7426300E PF8026300E 16.0 PF7436300E PF8036300E 70.0 78.3 0.128



Gland

Size

Entry Thread

Size

Nominal

Protrusion

Length [L]

Cable Sealing RangeThread Length

Part NumberDimensions/Weight

Across

Flats

Across

Corners

Weight

KgsMin Max Blue Black

16 3/8 NPT 27.0 5.0 8.0 11 PF7440800E PF8040800E 19.0 22.0 0.008

20 1/2 NPT 27.0 7.0 12.0 14 PF7441200E PF8041200E 24.0 26.8 0.010

25 3/4 NPT 35.0 12.0 18.0 15 PF7442000E PF8042000E 33.0 37.0 0.021

32 1 NPT 41.0 16.0 25.0 18 PF7442800E PF8042800E 42.0 47.0 0.038


Notes:



* If used in a threaded entry, NPT versions may protrude more than L length due to engagement of tapered threads.

* Industrial Non-Ex versions are not supplied with IP thread sealing washer.

* Industrial Non-Ex versions are only available in Black.


12/28





Page4.1.0

Cable Gland Type CR-C(featuring CROCLOCK) Ex d : Ex e : Ex nR : Ex ta : IP66 : IP68

Part Numbers: C R C * B *2 S R

CR-C type glands, certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22, Group I Mining, Gas Groups

IIA, IIB, IIC and Dust Groups IIIA, IIIB, IIIC. Occasionally referred to as potting glands, they provide a compound b arrier Ex d & IP seal on the cable inner cores, eliminating damage tocables that exhibit cold ow characteristics and an environmental seal on the outer sheath. The unique features include, CROCLOCK, the non reversible multi clamping systemfor wire (W), braid (X) and tape (Z) armoured cables and Peppers T-1000, the sealing compound that enables a quick and easy installation. The innovative barrier chamber providesa cable acceptance that is on average 17% greater than other designs. The gland maintains IP66 & IP68 to 100 metres and is deluge proof without the use of an additional seal ordeluge boot. It is supplied with an IP O-ring seal as standard on metric entry threads and options are available for use with lead sheath.

Compliance EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31

Standard: IEC 60079-0, IEC 60079-1, 60079-7, IEC 60079-15, IEC 60079-31 & IEC 60529

Certification: ATEX I M2 I I 2 GD Ex d I Mb & I IC Gb / Ex e I Mb & I IC Gb / E x ta I IIC Da

II 3GD Ex nR IIC Gc

IECE x Ex d I Mb & I IC Gb / E x e I Mb & IIC Gb / Ex ta II IC Da / Ex nR IIC Gc

GOST-R Ex d I & IICU / Ex e IIU

CSA Ex d I & IIC Class I Zone 1

AEx d IIC / AEx e II




NEPSI Ex d IIC

INMETRO BR - Exd IIC / Ex nR II / Ex tD A21

ABS 1-1-4/7.7, 4. 8-3/1. 7, 4-8-3/13 and 4-8- 4/27.5

MODU Rules 4-3-3/9

LLOYD S Enclosure Systems (Par t 1B)

RMRS Par t XI of Rules for sea- going ships (ed. 2008)


IECEx SIR 07.0098X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06188X


ABS 09-LD463991A-PDA

LLOYDS 10/00056

RMRS 09.00784.011

IP Rating: IP66 & IP68 (100 metres - 7 Days), NEMA 4X & DTS01 1991Temperature: -60oC to +135oC



Compound: Peppers T-1000 Sealing Compound


Gland

Size


Thread

Length

[B]

Cable Acceptance Details

Armour

Acceptance

Range

Nominal

Protrusion

Length [L]

Dimensions/Weight

(Metric)Metric

Thread

Shroud

Size

Cable Inner Sheath [C] Cable Outer Sheath [D]

Number of

Cores

Max

Over Cores

Max Inner

Sheath

Standard ReducedAcross

Flats

Across

Corners

[A]

Weight

KgsMetric NPT Min Max Min Max

16 M20 x 1.5 1/2 or 3/4 16 15 10.4 11.7 9.0 13.5 6.7 10.3 0.15-1.25 79 25.4 28.0 0.177 EL24

20S M20 x 1.5 1/2 or 3/4 16 35 10.4 11.7 12.9 16.0 9.4 12.5 0.15-1.25 79 25.4 28.0 0.166 EL24

20 M20 x 1.5 1/2 or 3/4 16 40 12.5 14.0 15.5 21.1 12.0 17.6 0.15-1.25 79 30.0 33.0 0.245 EL30

25 M25 x 1.5 3/4 or 1 16 60 17.8 20.0 20.3 27.4 16.8 23.9 0.15-1.60 89 37.6 41.4 0.402 EL38

32 M32 x 1.5 1 or 1 1/4 16 80 23.5 26.3 26.7 34.0 23.2 30.5 0.15-2.00 110 46.0 50.6 0.738 EL46

40 M40 x 1.5 1 1/4 or 1 1/2 16 130 28.8 32.2 33.0 40.6 28.6 36.2 0.20-2.00 110 55.0 60.5 1.079 EL55

50S M50 x 1.5 1 1/2 or 2 16 200 34.2 38.2 39.4 46.7 34.8 42.4 0.20-2.50 125 65.0 71.5 1.455 EL6550 M50 x 1.5 2 16 400 39.4 44.1 45.7 53.2 41.1 48.5 0.20-2.50 125 65.0 71.5 1.366 EL65

63S M63 x 1.5 2 or 2 1/2 19 400 44.8 50.1 52.1 59.5 47.5 54.8 0.30-2.50 125 80.0 88.0 2.157 EL80

63 M63 x 1.5 2 1/2 19 425 50.0 56.0 58.4 65.8 53.8 61.2 0.30-2.50 125 80.0 88.0 2.035 EL80

75S M75 x 1.5 2 1/2 or 3 19 425 55.4 62.0 64.8 72.2 60.2 68.0 0.30-2.50 130 90.0 99.0 2.399 EL90

75 M75 x 1.5 3 19 425 60.8 68.0 71.1 78.0 66.5 73.4 0.30-2.50 130 90.0 99.0 2.313 EL90

80 M80 x 2 3 or 3 1/2 25 425 64.4 72.0 77.0 84.0 71.9 79.4 0.45-3.15 162 104.0 115.2 4.763 EL104

85 M85 x 2 3 or 3 1/2 25 425 69.8 78.0 79.6 90.0 75.0 85.4 0.45-3.15 162 104.0 115.2 4.122 EL104

90 M90 x 2 3 1/2 or 4 25 425 75.1 84.0 88.0 96.0 82.0 91.4 0.45-3.15 162 114.0 125.7 5.114 EL114

100 M100 x 2 3 1/2 or 4 25 425 80.5 90.0 92.0 102.0 87.4 97.4 0.45-3.15 162 114.0 125.7 4.356 EL114


Notes:* Gland size does not necessarily equate to the entry thread size.* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.* Please ensure that the IP O-ring is not used in conjunction with a at IP washer.* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our Thread Reference Tables for specic dimensions.* Where glands are tted into non-metallic Ex e enclosures they must be included within the earth circuit of the system.* The user should seek expert advice if intending to combine ammable and combustible dust in one environment/installation.

* Assembly instructions must be read prior to installation and adhered to in full.* Peppers supply cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They

usually incorporate a thread run out according to the available machining techniques and will no t have a full form thread for the entire length. Peppers will not be held responsiblefor clients installations where this has not been taken into account.

* To maintain the specied IP rating, clearance holes must be in accordance with EN 50262 Table 1 and the entry device should be suitably secured.* The gland is supplied with the correct amount of the two-part compound, gloves and instructions to allow one complete termination.* Gland kits can be supplied with a PTFE IP washer in order to maintain the temperature range if required.


(See below for details)CR-CBCK1/NP/20/M20

CR-C Type of gland featuring CROCLOCK, single orientation clamping,Compound (Barrier) Inner Seal & Silicone Elastomeric Outer Seal

2 For Lead Sheath Cables


Options

R Reduced Bore Seal




1 Quantity per kit


20 Gland shell size

M20 M20 Entry Thread

Optional

Accessories Lock nut Brass (ACBLN) / Stainless Steel (ACSLN)





Curing Time: @ 21 oC

Conductor termination can be eected after 1 hour

The equipment can be energised after 4 hours

Compound chamber can be fully inspected after 4 hours


13/28





Page4.2.0

Cable Gland Type CR-X(Single Compression for Unarmoured Cables) Ex d : Ex e : Ex nR : Ex ta : IP66 : IP68

Part Numbers: C R X BS

CR-X type glands, when used with any shape cable, are certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21,

Zone 22, Group I Mining, Gas Groups IIA, IIB, IIC and Dust Groups IIIA, IIIB, IIIC. Occasionally referred to as potting glands, they provide a compound barr ier Ex d & IP seal on the cable

inner cores (or ying leads), eliminating damage to cables that exhibit cold ow characteristics. The unique features include, Peppers T-1000, the sealing compound that enables a

quick and easy installation and an innovative barrier chamber that provides a cable acceptance that is on average 17% greater than other designs. The gland maintains IP66 & IP68

to 100 metres and is deluge proof without the use of an additional seal or deluge boot. It is supplied with an IP O-ring seal as standard on metric entry threads.

Compliance

Standard:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31

IEC 60079-0, IEC 60079-1, 60079-7, IEC 60079-15, IEC 60079-31 & IEC 60529

Certification: AT EX I M2 II 2GD Ex d I Mb & IIC Gb / Ex e I Mb & IIC Gb / Ex ta IIIC Da

II 3GD Ex nR IIC Gc

IECEx Ex d I Mb & IIC Gb / Ex e I Mb & I IC Gb / Ex ta II IC Da / Ex nR I IC Gc



AEx d IIC / AEx e II




NEPSI Ex d IICINMETRO BR - Ex d IIC / Ex nR II / Ex tD A21

ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9

LLOYDS Enclosure Systems (Par t 1B)



IECEx SIR 07.0098X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06188X



LLOYDS 10/00056

RMRS 09.00784.011

IP Rating: IP66 & IP68 (100 metres - 7 Days), NEMA 4X & DTS01 1991

Temperature: -60o

C to +135o

CMaterials: Brass or Stainless Steel




Gland

Size

Entry Thread SizeISO Thread Length [B]

Gland Seal Range - Cable Sheath & CoresNominal Protrusion

Length [L]

Dimensions/Weight (Metric) Metric

Thread

Shroud

SizeNumber of Cores [C] Max Over Cores [C] Max Outer Sheath [D]

Across

Flats

Across

Corners [A]

Weight

KgsMetric NPT

20S M20 x 1.5 1/2" or 3/4" 16 35 10.4 11.7 42 25.4 28.0 0.126 L24

20 M20 x 1.5 1/2" or 3/4" 16 40 12.5 14.0 44 30.0 33.0 0.167 L30

25 M25 x 1.5 3/4" or 1" 16 60 17.8 20.0 48 37.6 41.4 0.260 L38

32 M32 x 1.5 1" or 1 1/4" 16 80 23.5 26.3 53 46.0 50.6 0.396 L46

40 M40 x 1.5 1 1/4" or 1 1/2" 16 130 28.8 32.2 54 55.0 60.5 0.600 L55

50 M50 x 1.5 2" 16 400 39.4 44.1 54 65.0 71.5 0.710 L65

63 M63 x 1.5 2 1/2" 19 425 50.0 56.0 55 80.0 88.0 1.054 L80

75 M75 x 1.5 3" 19 425 60.8 68.0 60 90.0 99.0 1.318 L90

80 M80 x 2 3" or 3 1/2" 25 425 64.4 72.0 80 104.0 115.2 2.734 L104

85 M85 x 2 3" or 3 1/2" 25 425 69.8 78.0 80 104.0 115.2 2.282 L104

90 M90 x 2 3 1/2" or 4" 25 425 75.1 84.0 85 114.0 125.7 2.854 L114

100 M100 x 2 3 1/2" or 4" 25 425 80.5 90.0 85 114.0 125.7 2.453 L114



(See below for details)CR-XBCK1/NP/20/M20

CR-X Type of gland with Compound (Barrier) Seal


Options


K or V Locknut, & Nylon (K) or Fibre (V) IP Washer


1 Quantity per kit


20 Gland shell size


Optional

Accessories Lock nut Brass (ACBLN) / Stainless Steel (ACSLN)


IP Washers Nylon (ACNSW) / Fibre (ACFSW)



Curing Time: @ 21o

CConductor termination can be eected after 1 hour



Notes:

* Gland size does not necessarily equate to the entry thread size.

* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.

* Please ensure that the IP O-ring is not used in conjunction with a at IP washer.





* Peppers supply cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards.

They usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length. Peppers will not beheld responsible for clients installations where this has not been taken into account.


* The gland is supplied with the correct amount of the two-part compound, gloves and instructions to allow one complete termination.

* Gland kits can be supplied with a PTFE IP washer in order to maintain the temperature range if required.


14/28





Page4.2.1

Part Numbers:

Cable Gland Type CR-U (Double Compression for Unarmoured Cables) Ex d : Ex e : Ex nR : Ex ta : IP66 : IP68

C R U B

S

CR-U type glands, certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22, Group I Mining, Gas Groups

IIA, IIB, IIC and Dust Groups IIIA, IIIB, IIIC. Occasionally referred to as potting glands, they provide a compound barrier Ex d & IP seal on the cable inner cores, eliminating damage to

cables that exhibit cold ow characteristics and an additional environmental seal on the outer sheath. The unique features include, Peppers T-1000, the sealing compound that

enables a quick and easy installation and an innovative barrier chamber that provides a cable acceptance that is on average 17% greater than other designs. The gland maintains IP66

& IP68 to 100 metres and is deluge proof without the use of an additional seal or deluge boot. It is supplied with an IP O-ring seal as standard on metric entry threads.

Compliance

Standard:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31


Certification: ATEX I M2 II 2GD Ex d I Mb & IIC Gb / Ex e I Mb & I IC Gb / Ex ta IIIC Da

II 3GD Ex nR IIC Gc

IECEx Ex d I Mb & IIC Gb / Ex e I Mb & I IC Gb / Ex ta I IIC Da / Ex nR I IC Gc



CSA AEx d IIC / AEx e II




NEPSI Ex d IICINMETRO BR - Ex d IIC / Ex nR II / Ex tD A21

ABS 1-1- 4/7.7 , 4.8-3 /1.7, 4 -8-3 /13 and 4-8- 4/27.5

MODU Rules 4-3-3/9

LLOYD S Enclosure Systems (Par t 1B)



IECEx SIR 07.0098X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06188X



LLOYDS 10/00056

RMRS 09.00784.011


Temperature: -60oC to +135oC




CABLE GLAND SELEC TION TABLE

Gland

Size


Length

[B]

Cable Acceptance Details

Nominal Protrusion

Length [L]


Thread

Shroud

Size

Cable Inner Sheath [C]Cable Outer Sheath [D]

Number of

CoresMax Over Cores

Across

Flats

Across

Corners [A]

Weight


16 M20 x 1.5 1/2" or 3/4" 16 15 10.4 3.4 8.4 73 25.4 28.0 0.192 EL24

20S M20 x 1.5 1/2" or 3/4" 16 35 10.4 4.8 11.7 73 25.4 28.0 0.192 EL24

20 M20 x 1.5 1/2" or 3/4" 16 40 12.5 9.5 14.0 73 30.0 33.0 0.258 EL30

25 M25 x 1.5 3/4" or 1" 16 60 17.8 11.7 20.0 74 37.6 41.4 0.382 EL38

32 M32 x 1.5 1" or 1 1/4" 16 80 23.5 18.1 26.3 80 46.0 50.6 0.578 EL46

40 M40 x 1.5 1 1/4" or 1 1/2" 16 130 28.8 22.6 32.2 87 55.0 60.5 0.892 EL55

50S M50 x 1.5 1 1/2" or 2" 16 200 34.2 28.2 38.2 87 65.0 71.5 1.172 EL65

50 M50 x 1.5 2" 16 400 39.4 33.1 44.1 87 65.0 71.5 1.036 EL6563S M63 x 1.5 2" or 2 1/2" 19 400 44.8 39.3 50.1 88 80.0 88.0 1.726 EL80

63 M63 x 1.5 2 1/2" 19 425 50.0 46.7 56.0 88 80.0 88.0 1.558 EL80

75S M75 x 1.5 2 1/2" or 3" 19 425 55.4 52.3 62.0 97 90.0 99.0 1.882 EL90

75 M75 x 1.5 3" 19 425 60.8 58.0 68.0 97 90.0 99.0 1.672 EL90

80 M80 x 2 3" or 3 1/2" 25 425 64.4 61.9 72.0 123 104.0 115.2 3.826 EL104

85 M85 x 2 3" or 3 1/2" 25 425 69.8 69.1 78.0 123 104.0 115.2 3.238 EL104

90 M90 x 2 3 1/2" or 4" 25 425 75.1 74.1 84.0 123 114.0 125.7 4.063 EL114

100 M100 x 2 3 1/2" or 4" 25 425 80.5 81.8 90.0 123 114.0 125.7 3.492 EL114


Notes:

* Gland size does not necessarily equate to the entry thread size.* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.* Please ensure that the IP O-ring is not used in conjunction with a at IP washer.* Dimensions (A) & (B) may dier for glands with non metric entry threads. Please refer to our Thread Reference Tables for specic dimensions.* Where glands are tted into non-metallic Ex e enclosures they must be included within the earth circuit of the system.* The user should seek expert advice if intending to combine ammable and combustible dust in one environment/installation.* Assembly instructions must be read prior to installation and adhered to in full.* Peppers supply cable glands with parallel entry threads that conform to the ameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards.

They usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length. Peppers will not be heldresponsible for clients installations where this has not been taken into account.

* To maintain the specied IP rating, clearance holes must be in accordance with EN 50262 Table 1 and the entry device should be suitably secured.* The gland is supplied with the correct amount of the two-part compound, gloves and instructions to allow one complete termination.* Gland kits can be supplied with a PTFE IP washer in order to maintain the temperature range if required.


(See below for details)CR-UBCK1/NP/20/M20

CR-U Type of gland with Compound (Barrier) Inner Seal & Silicone Elastomeric

Outer Seal


Options


K or V Locknut, & Nylon (K) or Fibre (V) IP Washer


1 Quantity per kit


20 Gland shell size


Optional

Accessories Locknut Brass (ACBLN) / Stai nless Steel (ACSLN)


IP Wash ers Nylon (ACNSW) / Fi bre (ACFSW)



Curing Time: @ 21o

CConductor termination can be eected after 1 hour




15/28





Page4.3.0

Cable Gland Type CR-S (Single Compression for use with Conduit) Ex d : Ex e : Ex nR : Ex ta : IP66 : IP68

Part Numbers: C R S B FS M

CR-S type glands, used in any orientation, are certied Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR, are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22, Group I

Mining, Gas Groups IIA, IIB, IIC and Dust Groups IIIA, IIIB, IIIC. Commonly referred to as a Conduit Stopper Box they are suitable for use with conductors carried in conduit or as a line bushing forterminating ying leads. They provide a compound barrier Ex d & IP seal on the cable inner cores, eliminating damage to cables that exhibit cold ow characteristics. The unique features include,Peppers T-1000, the sealing compound that enables a quick and easy installation and an innovative barrier chamber that provides a cable acceptance that is on average 17% greater than otherdesigns. The gland maintains IP66 & IP68 to 100 metres and is deluge proof without the use of an additional seal or deluge boot. It is supplied with an IP O-r ing seal as standard on metric entrythreads and options are available for use with LSOH cables. The gland is supplied with a female conduit connection thread as standard with an option for a male connection thread.

Compliance

Standard:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31


Certification: ATEX I M2 II 2GD Ex d I Mb & IIC Gb / Ex e I Mb & IIC Gb / Ex ta IIIC Da

II 3GD Ex nR IIC Gc

IECEx Ex d I Mb & IIC Gb / Ex e I Mb & IIC Gb / Ex ta IIIC Da / Ex nR IIC Gc






NEPSI Ex d IIC

INMETRO BR - Ex d IIC / Ex nR II / Ex tD A21ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5

MODU Rules 4-3-3/9




IECEx SIR 07.0098X

GOST-R GB.06.00853

CSA CSA 1356011

NEPSI GYJ06188X



LLOYDS 10/00056

RMRS 09.00784.011


Temperature: -60oC to +135oC





Gland

Size

Male Entry ThreadsMetric

Entry

Thread

Length [B]

Female Entry ThreadsGland Seal Range - Cable Sheath & Cores

Nominal

Protrusion

Length [L]


Thread

Shroud

Size

Number of Cores

[C]

Max Over Cores

[C]

Max Outer Sheath

[D]

Across

Flats

Across

Corners [A]

Weight

KgsMetric NPT Metric NPT

20 M20 x 1.5 1/2 or 3/4 16 M20 x 1.5 1/2 or 3/4 40 12.5 14.0 57 30.0 33.0 0.324 n/a

25 M25 x 1.5 3/4 or 1 16 M25 x 1.5 3/4 or 1 60 17.8 20.0 63 37.6 41.4 0.513 n/a

32 M32 x 1.5 1 or 1 1/4 16 M32 x 1.5 1 or 1 1/4 80 23.5 26.3 67 46.0 50.6 0.726 n/a

40 M40 x 1.5 1 1/4 or 1 1/2 16 M40 x 1.5 1 1/4 or 1 1/2 130 28.8 32.2 68 55.0 60.5 1.088 n/a

50 M50 x 1.5 2 16 M50 x 1.5 2 400 39.4 44.1 68 65.0 71.5 1.328 n/a

63 M63 x 1.5 2 1/2 19 M63 x 1.5 2 1/2 425 50.0 56.0 72 80.0 88.0 2.022 n/a

75 M75 x 1.5 3 19 M75 x 1.5 3 425 60.8 68.0 78 90.0 99.0 2.314 n/a

80 M80 x 2 3 or 3 1/2 25 M80 x 2 3 or 3 1/2 425 64.4 72.0 103 104.0 115.2 4.262 n/a85 M85 x 2 3 or 3 1/2 25 M85 x 2 3 or 3 1/2 425 69.8 78.0 103 104.0 115.2 3.748 n/a

90 M90 x 2 3 1/2 or 4 25 M90 x 2 3 1/2 or 4 425 75.1 84.0 104 114.0 125.7 4.791 n/a

100 M100 x 2 3 1/2 or 4 25 M100 x 2 3 1/2 or 4 425 80.5 90.0 104 114.0 125.7 4.103 n/a


Notes:

* Gland size does not necessarily equate to the entry thread size. Dimension [L] relates to the female back end conguration only.

* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.

* Please ensure that the IP O-ring is not used in conjunction with a at IP washer.



* The user should seek expert advice if intending

peppers catalogue glands

Documents