per cision tool

Distributed by:

WE GUARANTEE TO MATCH ALLCOMPETITORS PRICES

• European Engineering and Design• Supplied with nationally traceablecalibration certificates

• 12 + 12 Care Warranty Program

VALUE +

PRECISION TOOLSALE

Proudly Supporting the CanadianMetalworking Industry since 1960

THE BEST OF BOTH BRANDS

Pricing valid while quantities last or until further notice

®®

CCaalliibbrraattiioonn LLaabbRReeppoorrtt

• European Engineering and Design• Supplied with nationally traceablecalibration certificates

• 12 + 12 Care Warranty Program

VALUE +

Asimeto Precision Tools were designed with you in mind. In thequest to meet your precision measurement needs, and toprovide excellent price to performance value, our design teamhas enlisted the craftsmanship of European designers to giveour tools a modern look and a great feel.

Furthermore, our tools conform to national and federalspecifications, and come standard with calibration certificates,so you can be sure that your Asimeto tools are ready to perform.

If innovative design, great value, and superior quality areimportant to you, then choose Asimeto Precision Tools as yourmeasurement partner. Please call for your complete Asimeto

catalogue today #ASMT009

3

SALERange Resolution Accuracy Code No. Price $

0-6” / 0-150mm .0005” / 0.01mm ±.001” 286-500 57.960-8” / 0-200mm .0005” / 0.01mm ±.001” 286-502 105.750-12” / 0-300mm .0005” / 0.01mm ±.0015” 286-504 183.87

fea tures :• Extras large LCD readout• Inch - Metric conversion

SALERange Resolution Accuracy Code No. Price $0-6” .001” ±.001” 286-834 59.310-8” .001” ±.0015” 286-838 86.490-8” .001” ±.0015” 286-842 136.62

fea tures :• .100” Range Per Rev.• Hardened stainless steel

®® Value +• European Engineering and Design• Supplied with nationally traceable calibration certificates• 12 + 12 Care Warranty Program

DIGIMATIC CALIPERS

IP 6677 COOLANT PROOF CALIPER

DIAL CALIPERS

Blocks Blocks SALEPer Set Included Grade Code No. Price $

1 Block: 0.050”

10 Blocks: 0.1000”-0.1009” x 0.0001” steps

81 49 Blocks: 0.101”-0.149” x 0.001” steps 2 (B) 287-224 284.4017 Blocks: 0.150”-0.950” x 0.050” steps

4 Blocks: 1.000”-4.000” x 1.000” steps

fea tures :• Individual serial numbers• Calibration Cert to N.I.S.T• Deluxe fitted wooden case• Mirror polished surface

81 PC GAGE BLOCK SET

fea tures :• Can measure OD, ID, depth and steps• Available in Plain, Thumb Clamp and Fine adjustment.• Stainless Steel

Range Vernier Resolution SALELower Scale Upper Scale Lower Scale Upper Scale Accuracy Code No. Price $

Plain Vernier0-150mm 0-6” .05mm 1/128” ±0.06mm 286-902 53.730-150mm 0-6” .02mm .001” ±0.03mm 286-908 46.260-200mm 0-8” .02mm .001” ±0.03mm 286-910 85.32

Thumb Clamp0-150mm 0-6” 0.02mm .001” ±0.03mm 286-938 58.230-200mm 0-8” 0.02mm .001” ±0.03mm 286-940 92.88

VERNIER CALIPERS

IP67 SPC OUTPUT

IP65

fea tures :• Range: 0-6”/0-150mm• Resolution: .0005”/0.01mm• Accuracy: ± .001”


0-6” / 0-150mm .0005” / 0.01mm ±.001” 286-560 144.00

4

fea tures :• Lug Back (attached) / Flat Back supplied• Tolerance measurement feature• Inch/Metric conversion• SR44 (silver oxide cell) battery

Dial SALERange Grad. Reading Code No. Price $0-.25” .001” 0-100 286-700 43.380-.25” 0-50-0 0-100 286-702 43.38

fea tures :• Range Per Rev. .1”• Stem Dia. 3/8• Dial face dia. 1.65”• Lug Back• Jeweled bearings


0-1” / 0-25mm .0005” / 0.01mm ±.0012” / ±0.03 286-612 220.23

Dial Digital Counter SALERange Graduation Graduation Accuracy Code No. Price $

0-18” .001” .1”(Dual Reading) ±.002 287-102 476.01

fea tures :• Dial & digital counter reading• Hand wheel for easier travel• Carbide tipped scriber


DIAL INDICATORS SERIES 11

Dial SALERange Grad. Reading Code No. Price $0-.5” .0005” 0-50 286-714 35.820-.5” .001” 0-100 286-718 35.820-1” .001” 0-100 286-722 35.820-.05” .0001” 0-5-0 286-725 90.990-.05” .0001” 10-0 286-727 90.99

fea tures :• Range Per Rev. .1” for .5 & 1”• Range Per Rev. .01” for .05”• Stem Dia. 3/8• Dial face dia. 2.20”• Lug Back• Easy to read dial face

DIAL INDICATORS SERIES 22

DIAL/DIGITAL HEIGHT GAUGE

DIGIMATIC INDICATORS

Pull SALEModel Action Code No. Price $6” Rod and Universal Clamp 132 lbf 287-200 28.896” Adjustable Rod / Fine Adjustment 132 lbf 287-202 30.42

fea tures :• For Indicators with 3/8 stems and or Lug backs with 1/4 hole dia.• On/Off switch• 132 lbf Magnetic pull

MAGNETIC STANDS

Dial SALERange Resolution Reading Accuracy Code No. Price $.008” .0001” 0-4-0 ±.0001” 287-150 102.69.03” .0005” 0-15-0 ±.0005” 287-154 79.29

fea tures :• Jeweled bearings• Inch units come with 5/32 & 3/8 dovetail stems• Metric unit comes with 6mm & 8mm dovetail stems• Easy to read yellow face

DIAL TEST INDICATORS

5


SALERange Resolution Code No. Price $0-1” / 0-25mm .00005” / 0.001mm 285-090 249.75

SALERange Graduation Code No. Price $0-3” (3 pc set) .0001” 285-150 118.260-4” (4 pc set) .0001” 285-152 162.180-6” (6 pc set) .0001” 285-154 272.790-6” (6 pc set) .001” 285-254 267.30

fea tures :• Ratchet stop• Locking clamp• Carbide Faces• Satin Chrome finish

SALERange Graduation Accuracy Code No. Price $0-1” .0001” ±.0001” 285-100 34.831-2” .0001” ±.0001” 285-102 37.622-3” .0001” ±.0001” 285-104 41.403-4” .0001” ±.00015” 285-106 44.82

fea tures :• Accuracy +.00015”• .157 Dia. interchangeable rod lengths can be adjusted after wear on the measuring tip

• Ratchet Stop• Statin Chrome finish throughout

Base SALERange Graduation Length Code No. Price $

0-6” .001” 4.0” 285-858 203.76

fea tures :• Accuracy: + .0001”• On/Off Sensor• Extra large LCD readout• Measurement hold button• Carbide Face• Inch - Metric conversion

IP65 SPC OUTPUT

OUTSIDE MIC. ..00000011” RATCHET STOP

DIGIMATIC MIC HEAD RATCHET STOP DEPTH MICROMETER

OUTSIDE MICROMETER SETS

fea tures :• On/Off Sensor• Extra large LCD readout• Carbide Faces• Inch - Metric conversion

Inch Inch Metric Metric SALERange Accuracy Range Accuracy Thimble Type SPC Code No. Price $0-1 .0001 0-25 .004 Ratchet No 285-002 172.80

0-1 .0001 0-25 .004 Friction No 285-020 172.80

0-1 .0001 0-25 .004 Ratchet Yes 285-040 223.831-2 .0002 25-50 .004 Ratchet Yes 285-042 241.56

0-1 .0001 0-25 .004 Friction Yes 285-070 223.831-2 .0002 25-50 .004 Friction Yes 285-072 241.56

SSeettss0-3 0-3 0-75 0-75 Ratchet Yes 285-080 743.76

IP65 SPC OUTPUT

DIGIMATIC OUTSIDE MICROMETERS

6

•• 00--11”” MMiiccrroommeetteerr ..00000011”” 228855--110000 LLiisstt $$3388..7700•• 11--22”” MMiiccrroommeetteerr ..00000011”” 228855--110022 LLiisstt $$4411..8800•• 66”” DDiiggiimmaattiicc CCaalliippeerr 228866--550000 LLiisstt $$6644..4400•• 00--11 ..000011”” DDiiaall IInnddiiccaattoorr 228866--772222 LLiisstt $$3399..8800•• MMaaggnneettiicc BBaassee 228877--220000 LLiisstt $$3322..1100•• ..00000055”” xx ..003300”” TTeesstt IInndd.. 228877--115544 LLiisstt $$8888..1100•• 66”” PPoocckkeett RRuullee 660066--118800 LLiisstt $$55..5500•• EEnnggiinneeeerrss BBllaacckk BBooookk 118800--115555 LLiisstt $$4455..7700

Includes 1 each of the following:

START UP KIT #2®® Value +

• European Engineering and Design• Supplied with nationally traceable calibration certificates• 12 + 12 Care Warranty Program

24” Dial/Digital Height GaugeCombo• 0-24 .001 Dial/digital height gauge 287-104• 0-15-0 .0005 Grad .03 Range Indicator 287-154• Holding Bar & Clamp

Height Gauge Features:• Dial & digital counter reading• Hand wheel for easier travel• Carbide tipped scribery

Test Indicator Features• Jeweled bearings• 5/32 & 3/8 dovetail stemsincluded

12”/300mm Digimatic HeightGauge Combo• 0-12”/300mm Digimatic Height Gauge 287-131• 0-15-0 .0005 Grad .03 Range Indicator 287-154• Holding Bar & Clamp

Height Gauge Features:• Fine Adjustment• Easy to read large LCD display• Inch/Metric conversion• SR44 (silver oxide cell) battery


24”/600mm Digimatic HeightGauge Combo• 0-24”/600mm Digimatic Height Gauge 287-132• 0-15-0 .0005 Grad .03 Range Indicator 287-154• Holding Bar & Clamp

Height Gauge Features:• Fine Adjustment• Easy to read large LCD display• Inch/Metric conversion• SR44 (silver oxide cell) battery


$628.41Code # 500-149

$493.00Code # 500-150

$675.75Code # 500-151

Height Gauge &

Indicator Combo’s


Height Gauge Features:• Dial & digital counter reading• Hand wheel for easier travel• Carbide tipped scriber


$439.03Code # 500-147

Free BlackBook with Height GaugeComboPurchase !


Height Gauge Features:• Dial & digital counter reading• Hand wheel for easier travel• Carbide tipped scriber


$584.63Code # 500-148

TToottaall vvaalluuee ooff oovveerr $$335566..1100FFoorr oonnllyy

$$229999..2299!!oorrddeerr bbyy PPrroommoo KKiitt CCooddee ## 550000--112222

7

•• 00--66”” ..00000011”” MMiiccrroommeetteerr SSeett 228855--115544 LLiisstt $$330033..1100•• 66”” DDiiggiimmaattiicc CCaalliippeerr 228866--550000 LLiisstt $$6644..4400•• 00--11 ..000011”” DDiiaall IInnddiiccaattoorr 228866--772222 LLiisstt $$3399..8800•• MMaaggnneettiicc BBaassee 228877--220000 LLiisstt $$3322..1100•• ..00000011”” xx ..000088”” TTeesstt IInndd.. 228877--115500 LLiisstt $$111144..1100•• 66”” PPoocckkeett RRuullee 660066--118800 LLiisstt $$55..5500•• EEnnggiinneeeerrss BBllaacckk BBooookk 118800--115555 LLiisstt $$4455..7700

TToottaall vvaalluuee ooff oovveerr $$660044..7700 FFoorr oonnllyy

$$551166..6633!!oorrddeerr bbyy PPrroommoo KKiitt CCooddee ## 550000--115522

Includes 1 each of the following:START UP KIT #3


KIT NO. 500-153

Includes:•• 00--66”” ..000011 DDiiaall CCaalliippeerr 228866--883344 LLiisstt $$6655..9900•• 00--11”” ..000011 00--110000 DDiiaall IInndd 228866--772222 LLiisstt $$3399..8800•• MMaagg SSttaanndd cc//ww 66”” rroodd 228877--220000 LLiisstt $$3322..1100•• 00--11”” ..00000011 OOuuttssiiddee MMiicc 228855--110000 LLiisstt $$3388..7700

TToottaall vvaalluuee ooff $$117766..5500

FFoorr oonnllyy $$115500..0033

KIT NO. 500-154

Includes:•• 66””//115500mmmm DDiiggiittaall CCaalliippeerr 228866--550000 LLiisstt $$6644..4400•• 00--11”” ..000011 00--110000 DDiiaall IInndd 228866--772222 LLiisstt $$3399..8800•• MMaagg SSttaanndd cc//ww 66”” rroodd 228877--220000 LLiisstt $$3322..1100•• 00--11”” ..00000011 OOuuttssiiddee MMiicc 228855--110000 LLiisstt $$3388..7700



KIT NO. 500-156

Includes:•• 88””//220000mmmm DDiiggiittaall CCaalliippeerr 228866--550022 LLiisstt $$111177..5500•• 00--11”” ..000011 00--110000 DDiiaall IInndd 228866--772222 LLiisstt $$3399..8800•• MMaagg SSttaanndd cc//ww 66”” rroodd 228877--220000 LLiisstt $$3322..1100•• 00--66”” ..00000011 MMiicc sseett 228855--115544 LLiisstt $$330033..1100•• 00--1155 ..00000055””//..0033”” TTeesstt IInndd 228877--115544 LLiisstt $$8888..1100

KIT NO. 500-155

Includes:•• 88””//220000mmmm DDiiggiittaall CCaalliippeerr 228866--550022 LLiisstt $$111177..5500•• 00--11”” ..000011 00--110000 DDiiaall IInndd 228866--772222 LLiisstt $$3399..8800•• MMaagg SSttaanndd cc//ww 66”” rroodd 228877--220000 LLiisstt $$3322..1100•• 00--11”” ..00000011 OOuuttssiiddee MMiicc 228855--110000 LLiisstt $$3388..7700•• 11””--22”” ..00000011 OOuuttssiiddee MMiicc 228855--110022 LLiisstt $$4411..8800•• 66”” PPoocckkeett RRuullee 660066--118800 LLiisstt $$55..5500



•• ..331155--55..9900 TTeellee//ggaauuggee sseett 228866--881122 LLiisstt $$4400..8800•• 2288 EEddiittiioonn MMaacchh HHaannddbbooookk 118800--110055 LLiisstt $$115566..0000•• 66”” PPoocckkeett RRuullee 660066--118800 LLiisstt $$55..5500



8

•• ..00000055”” xx ..003300”” TTeesstt IInndd..228877--115544 LLiisstt $$8888..1100

•• MMaaggnneettiicc BBaassee wwiitthh FFiinnee AAddjj..228877--220022 LLiisstt $$3333..8800


Kit # 500-173Kit # 500-174

SPECIAL $87.64

SPECIAL $103.62SPECIAL $132.77


BUNDLE NO. 1 [Package 1]Contents: 1pc Noga Mag Base MA61003 Code-165-425

1pc Asimeto 1” .001” Dial Indicator Code-286-722

Code No. 500-116 Special $403.84

BUNDLE NO. 2 [Package 2]Contents: 1pc Noga Mag Base DG1033 Code-165-350

1pc Asimeto 1” .001” Dial Indicator Code-286-722


BUNDLE NO. 6 [Package 6]Contents: 1pc Noga Mag Base MA61003 Code-165-425

1pc Asimeto .03” .0005” Dial Test Indicator Code-287-154


Featuring:• 25” REACH• 292 LBS HOLDING


BUNDLE NO. 5 [Package 5]Contents: 1pc Noga Mag Base DG1033 Code-165-350

1pc Asimeto .03” .0005” Dial Test Indicator Code-287-154



NOGA TEAMED WITH ASIMETO DIAL GAUGES OFFERING EXCEPTIONAL VALUE


•• 66””//115500mmmm DDiiggiimmaattiicc CCaalliippeerr228866--550000 LLiisstt $$6644..4400

•• 00--11”” ..00000011”” MMiiccrroommeetteerr228855--110000 LLiisstt $$3388..7700


KIT NO. 500-175•• 88””//220000mmmm DDiiggiimmaattiicc CCaalliippeerr228866--550022 LLiisstt $$111177..5500

•• 00--11”” ..00000011”” MMiiccrroommeetteerr228855--110000 LLiisstt $$3388..7700


Travel Dial Grad. SALE(in) (in) (in) Code No. Price $1/4 0-50-100 .001 200-745 17.091/2 0-50-100 .001 200-718 17.091 0-50-100 .001 200-720 17.091 0-50-100 .0005 200-755 19.472 0-50-100 .001 200-725 41.481 0-50-100 .001 200-010 21.68

THE COST EFFECTIVE ALTERNATIVE TO ALL YOURPRECISION MEASURING REQUIREMENTS

WE GUARANTEE TO MATCH ALLCOMPETITORS PRICES

OOUUTTSSTTAANNDDIINNGG

PPRRIICCEESS OONN HHUUNNDDRREEDDSS

OOFF PPRROODDUUCCTTSS !!

PRECISION TOOLS

ALL STM PRODUCTS ARE FULLY GUARANTEED AGAINSTMANUFACTURERS DEFECTS FOR A PERIOD OF ONE YEAR.

PRICES VALID WHILE SUPPLIES LAST AND ARESUBJECT TO CHANGE WITHOUT NOTICE.

DIAL INDICATORS• Reverse counter• Stainless steel components• Rotating bezel with clamp• Lugback (1/4" hole)• Interchangeable point• Conforms to AGD 2 standards

InchRange Grad. SALE(in.) (in.) Code No. Price $0-4 .001 200-562 33.070-6 .001 200-582 31.960-8 .001 200-584 56.100-12 .001 200-586 74.89

Range Grad. SALE(in.) (mm) Code No. Price $150 .02 200-583 31.96200 .02 200-585 57.55300 .02 200-587 76.42

Metric

• Covered rack• Accurate to .001 per 6"• Made of stainless steel• Clamp for repetitive setting• Deluxe case• .100" Revolution

Standard Fine Adj. Flex StemModel BA-1 BA-1F BA-1X SALECode No. Price $ Code No. Price $ Code No. Price $

MADE IN TAIWAN

225-001 49.56 225-002 62.48 225-003 80.73MADE IN CHINA

225-705 17.09 225-700 18.19MADE IN USA

225-805 73.53

STM MAGNETIC BASES

Range SALE(in x mm) Code No. Price $0-4 x 100 200-642 53.380-6 x 150 200-645 40.380-8 X 200 200-646 73.530-12 x 300 200-647 113.820-24 x 600 200-648 383.440-40 x 1000 200-649 602.06

• Inch/metric conversion• Auto on, auto shutoff• .0005"/.01mm resolution• Zero button

Range Grad. SALE(in x mm) (in x mm) Code No. Price $

INCH MICROMETERS0-3 .0001 200-578 70.980-4 .0001 200-094 99.540-6 .0001 200-580 171.536-12 .0001 200-096 353.430-12 .0001 200-098 536.10

METRIC MICROMETERS0-75mm .01mm 201-020 70.980-150mm .01mm 201-022 171.53150-300mm .01mm 201-024 353.430-300mm .01mm 201-026 536.10

• Ratchet and lock nut• Complete with standards (2" and up)• Carbide faces• Fitted wood case

MICROMETER SETS DIAL CALIPERS

DIGIMATIC CALIPERS

10

SAVE !PRECISION TOOLS

Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-6 x 150 1/1000 x 1/20 200-210 29.580-8 x 200 1/1000 x 1/20 200-215 35.020-12 x 300 1/1000 x 1/20 200-220 65.82

Range Graduation Jaw Depth SALE(in x mm) (in x mm) (in) Code No. Price $0-12 x 300 1⁄1000 x 1⁄50 3 200-588 76.080-18 x 450 1⁄1000 x 1⁄50 3-1⁄2 200-590 121.720-24 x 600 1⁄1000 x 1⁄50 4 200-592 152.070-40 x 1000 1⁄1000 x 1⁄50 5-1⁄2 200-594 334.390-60 x 1500 1⁄1000 x 1⁄50 6-1⁄2 200-596 759.820-80 x 2000 1⁄1000 x 1⁄50 7-3⁄4 200-598 1,337.31

EF/4

EF/3

EF/6

EF/9

EF/8

EF/7

EF/5

EF/1

Edge and Centre Findersare time saving positioningtools for use on jig boring,milling machines etc.These are used for accurate locating workedges, shoulders, grooves,centre points and scribedlines.

Shank SALEModel Tip Dia. Dia. Code No. Price $CENTRE FINDEREF/3 – 1/2 231-302 11.39EF/9 – 3/8 231-304 11.14COMBINATION EDGE & CENTRE FINDEREF/6 .200 3/8 231-306 12.33EF/5 .200 1/2 231-308 13.01EDGE FINDEREF/1 .200 3/8 231-310 9.61EF/4 .200 1/2 231-312 11.39EF/11 10mm 3/8 231-314 11.39EF/8 1/2 1/2 231-316 11.14DOUBLE EDGE FINDEREF/7 .200 1/2 231-318 12.33

SALERange Model No. Code No. Price $

1/32"-5/8" BG/1-15/in 231-276 14.961-15mm BG/1-15 231-277 14.96

Manufactured from stainless steel, these have permanently engraved graduations.Accurate taperthroughout the length of the gauge. Available with imperial or metric graduations.

Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-6 x 150 .0005 x 0.01 200-540 40.380-8 X 200 .0005 x 0.01 200-541 73.530-12 x 300 .0005 x 0.01 200-542 113.82

Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-6 x 150 1/1000 x 1/20 200-600 24.740-8 X 200 1/1000 x 1/20 200-605 30.860-12 x 300 1/1000 x 1/20 200-610 55.51

Capacity Jaw Model SALE(in.) Length (in.) No. Code No. Price $1-1/4 2 PC/1 231-286 7.311-3/4 2-1/2 PC/2 231-288 8.842-1/4 3 PC/3 231-290 11.312-3/4 4 PC/4 231-292 16.493-1/2 5 PC/5 231-294 26.185 6 PC/6 231-296 36.986 8 PC/8 231-298 65.79

Range Grad. SALE(in x mm) (in x mm) Code No. Price $

INCH MICROMETERS0 -1 .0001 200-570 21.591-2 .0001 200-572 23.552-3 .0001 200-574 26.103-4 .0001 200-576 28.564-5 .0001 200-577 33.245-6 .0001 200-579 38.856-7 .0001 200-082 45.487-8 .0001 200-084 51.098-9 .0001 200-086 56.199-10 .0001 200-088 61.8010-11 .0001 200-090 66.9011-12 .0001 200-092 72.51

METRIC MICROMETERS0-25 .01mm 201-002 21.5925-50 .01mm 201-004 23.5550-75 .01mm 201-006 26.1075-100 .01mm 201-008 28.56100-125 .01mm 201-010 33.24125-150 .01mm 201-012 38.85150-175 .01mm 201-013 54.15175-200 .01mm 201-014 62.22200-225 .01mm 201-015 59.95225-250 .01mm 201-016 66.01250-275 .01mm 201-017 71.33275-300 .01mm 201-018 77.30

• Deluxe heat insulated forged steel frame up to 4"• Chrome clad• Complete with standards (2" and up)• Carbide faces• Ratchet stop for exact and repetitive reading• Fitted case

LARGE DISPLAY DIGIMATIC CALIPERS• Large face for easy reading• Inside, outside, step and depth measurements• Inch/metric conversion• Auto on, auto shutoff• .0005"/.01mm resolution• Zero button

VERNIER CALIPERSWITH THUMB LOCK

OUTSIDE MICROMETERS

PARALLEL CLAMPSManufactured from case hardened steel, parallel clamps aredesigned for maximum strength and rigidity.• Equipped with spring clip• Retaining ring

EDGE AND CENTRE FINDERS

VERNIER CALIPERS WITH FINE ADJUSTMENT

H.D. EXTRA LONG VERNIER CALIPERS

BORE GAUGE (TAPER GAUGE)

Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-6 x 150 .0005 x 0.01 200-945 164.140-8 X 200 .0005 x 0.01 200-950 231.03

IP65 SPC OUTPUT

COOLANT PROOFDIGIMATIC CALIPERS• Coolant resistant• Inside, outside, step and depth measurements• Inch/metric conversion• Auto on, auto shutoff• .0005"/.01mm resolution• Zero button

Jaw JawLength Width Opening Height SALE

Model No. (mm) (mm) (mm) (mm) Code No. Price $YCT-VB20 140 48 65 25 230-815 85.09YCT-VB25 170 63 90 35 230-820 104.13YCT-VB30 180 73 90 35 230-825 113.31YCT-VB35 225 88 125 45 230-830 173.74YCT-VB40 225 98 125 45 230-835 229.25YCT-VB50 287 125 150 50 230-836 346.63

TOOLMAKER VISES• Solid one piece body• Square and parallel within 0.0002" and 0.0003"• Angled centre channel provides extra jaw capacity

11

PRECISION TOOLS

Deluxe ModelSame features asbasic model plus:• .00005"/.001 mm resolution• Friction thimble• Min./Max.• Hold function

Range SALE(in x mm) Code No. Price $0-1 x 25 200-012 134.6412 x 25-50 200-014 154.962-3 x 50-75 200-016 175.44

Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-1 x 0-25 .00005 x 0.001 200-020 152.83

Range Graduation Base SALE(in/mm) (in/mm) (in/mm) Code No. Price $

INCH DEPTH MICROMETERS0-4 .001 2-1/2 200-550 74.720-4 .001 4 200-552 74.720-6 .001 2-1/2 200-557 96.220-6 .001 4 200-555 96.22

METRIC DEPTH MICROMETERS0-100 mm .01 mm 64 mm 200-440 115.520-100 mm .01 mm 100 mm 200-445 115.520-150 mm .01 mm 64 mm 200-450 138.550-150 mm .01 mm 100 mm 200-455 96.22

Range SALE(mm) Code No. Price $

12/300 mm 200-675 405.7118/450 mm 200-680 584.3824/600 mm 200-690 734.15

• Carbide tipped scriber• Resolution .001"/0.0/mm

Travel Dial Grad. SALE(in) (in) (in) Code No. Price $0-.4 0-50 .0005 200-075 45.90

SALEDescription Code No. Price $

18 piece wavy parallel set 230-150 87.38

Range SALE(in x mm) Code No. Price $0-3 x 0-75 200-018 464.95

SALECode No. Price $200-500 18.36

Range Graduation SALE(in x mm) (in x mm) Code No. Price $

INCH MICROMETERS0-4 .001 200-025 133.790-6 .001 200-030 170.266-12 .001 200-035 214.3712-16 .001 200-040 305.1516-20 .001 200-045 316.20

METRIC MICROMETERS0-150 mm .01 mm 200-050 170.26150-300 mm .01 mm 200-055 214.37300-400 mm .01 mm 200-060 284.67400-500 mm .01 mm 200-065 322.24

Size Thickness Ship. Wt. SALE(in) (in) (lb) (±) Code No. Price $

GRADE B–TOOL ROOM–NO LEDGE9 x 12 3 40 .0001 255-100 55.7612 x 18 3 110 .0001 255-105 85.2618 x 24 4 189 .00015 255-110 228.7424 x 36 4 475 .0002 255-115 413.6136 x 48 6 1427 .0004 255-120 1,317.3348 x 72 8 3300 .0007 255-125 4,108.22GRADE A–INSPECTION12 x 18 3 110 .000050 255-130 98.7718 x 24 3 189 .000075 255-135 206.3824 x 36 4 475 .0001 255-140 435.12

Range Graduation SALE(in) (in) Code No. Price $12 0.0005 200-707 193.2918 0.0005 200-708 333.2920 0.0005 200-709 338.1324 0.0005 200-711 376.81

A1-921

Model No Grad Range SALE(in) (in) Reading Code No. Price $

AI-911-Teclock Style .001 1/2 0-100 215-005 42.84AI-921-Teclock .001 1 0-100 215-010 46.41

COOLANT PROOF DIGIMATIC MICROMETERS• Water resistant• Battery powered 1 year life• Clear, easy to read LCD display• .00005”"/.001 mm resolution• Carbide faces• C/W Ball attachment

COOLANT PROOF DIGIMATIC MIC SET• Water resistant• Battery powered 1 year life• Clear, easy to read LCD display• .00005”"/.001 mm resolution• Carbide faces• C/W Ball attachment

DIGIMATIC MICROMETERSBasic Model• Battery powered 1 year life• Clear, easy to read LCD display• .0001"/.001 mm resolution• Carbide faces• Ratchet stop• Enamel finish• Case included

MICROMETER STANDAn indispensable clamping device forprecise and stable measurements, it ismost useful to speed up productionand quality inspection jobs.

GRANITE SURFACE PLATES 0-LEDGEImported Precision Toolroom Black Granite Surface PlatesThese plates are made of the highest quality – True Black – Fine Grained – Non-porous – Jewel Hardness – Granite available to give years of long lasting service.

Specifications:Compressive Strength 7329 lbs. / in 2Water Absorptivity 0.13%

DEPTH MICROMETERS• Base surface hardened ground• Satin chrome finish• .001" graduations• Complete with fitted case

INTERCHANGEABLE ANVIL OUTSIDE MICROMETERS• Blue enamel finish• Perforated frame• Carbide tipped spindle and anvils

• Ratchet stop and lock nut• Setting standards included• Complete with fitted case

TWIN-COLUMN ELECTRONIC HEIGHT GAUGES• Rigid twin column structure• 6 digit LCD display and minus sign• Functions include: Zero setting, inch/mm conversion, data hold, plus/minus processing

• Large size feed wheel• Lock-on measuring slider• Battery furnished

• 0.01" dual reading digital counter• Double digital counter can be zero-set at any height within range by depressing zero reset button

• Chrome plated double beams• Carbide tipped scriber• With fine adjusting wheel and lock• Supplied with fitted case

COOLANT PROOFDIAL INDICATOR

• Water Resistant• Reverse counter• Stainless steel components• Rotating bezel with clamp• Lugback (1/4" hole)• Interchangeable point• Conforms to AGD 2 standards

DIAL INDICATORS• Reverse counter• Stainless steel components• Rotating bezel with clamp• Lugback (1/4" hole)• Interchangeable point• Conforms to AGD 2 standards

1188 PIECE WAVY PARALLEL SET• Consists of 9 pair ranging from 1/2to 1-1/2" in 1/8" height increments

• Complete with fitted case• Made of high quality spring steel, hardened, stress relieved and precision ground

• Guaranteed to size in height and parallelism ±.0002"

TWIN COLUMN DIAL HEIGHT GAUGES

12

SAVE !Precision Tools


Co-Ax indicator 200-005 191.34

Here is a rugged holder for indicators for use as lathestops, etc. Lug back


Mag. base ind. holder 200-885 9.27

This range of handy magneticstands provide a simple & inexpensive way of holding dial indicators on any flat ferrous surface. To activate simply pull out the basefrom contact face. Available with orwithout fine fitting.

Base Base Mag SALEModel No. Dia. (in.) Height (in.) Pull kg. Code No. Price $MMS/1 1-1/8 1 5 231-138 13.94MMS/DA-4 1-1/8 1 5 231-140 20.83MMS/DA-5 1-3/8 1-3/16 8 231-142 22.02

• Adapts immediately for fast and positive indicating• Suitable for all popular indicators with 5/32" shankor dovetail

• Reach from 0-12" diameter• 1-7/8" capacity


Dial test indicator holder 200-815 17.09

SALECode No. Price $200-820 7.99

• Used for measuring concaveand convex surfaces

Set of 4 Gauges .125" –.500"

SALESizes Consisting of: Code No. Price $.010, .015, .020, .025, .030, .040, .050, .060, .070, .080, .090, .100, .120, .140, .160, .180, .200, .220, .240, .260, .280, .300, .350, .400, .450 , .500" in vinyl case26 pc. set with holder 230-005 35.28.5 to 13.0 mm x .5 mm increases26 pc. set with holder 230-010 35.28

SALESizes Consisting of: Code No. Price $Set of 4 Gauges .125" –.500" – Made in USA 220-940 78.54Set of 4 Gauges .125"–.500" – Quality Import 200-713 19.47

Dial Dia. Grad. Range Reading Pt. Length SALE(in) (in) (in) (in) (in) Code No. Price $

INDIVIDUAL1.250 .0005 .030 0-15-0 .700 200-730 50.321.250 .0001 .008 0-4-0 .650 200-800 74.21

SETS1.250 .0005 .030 0-15-0 .700 200-805 83.811.250 .0001 .008 0-4-0 .650 200-810 112.46

SETS• Includes 5/32" and 3/8" mounting shanks and 3/8" bar

Furnished with interchangeable anvils and necessary accessories to perform close tolerance I.D. measurements. The smallest rangemeasurement is .24", the largest is 16". The AGDSeries 2 Dial Indicator furnished in each kit is a rugged top-quality unit.• .0005" graduations• Complete with fitted case

Range Bore No. SALE(in) Depth Anvils Code No. Price $

0.24–0.4 1.56” 9 200-650 139.910.4–0.7 2.4” 9 200-651 121.720.7–1.4 4” 8 200-652 103.361.4–2.0 6” 6 200-653 103.362.0–6.0 6” 11 200-654 106.426.4–10.0 16” 6 200-655 130.8210.0–16.0 16” 6 200-656 149.01

SALEDescription Code No. Price $4" and 7" spindles 200-840 23.129" and 12" spindles 200-845 27.4612" and 18" spindles 200-850 29.24


Half round combination holder 200-816 10.29

SALEDescription Code No. Price $Super Mag 200-880 9.27

Satin Finish Stainless Steel

No. L300 Series

SALEModel No. Specifications Code No. Price $L 300 CX 1⁄64–17⁄64 x 64ths 9⁄32–1⁄2 x 32nds 225-005 106.85L 300 MX 0.5mm–13mm x 0.5mm 225-010 192.10

1/64–17/64 x 64ths 9/32–1/2 x 32nds 230-015 34.17

TEST INDICATORS AND SETS• White face• Available in bezel or dial• Contact point adjustable through 230°• Fully jeweled movement• Extremely light contact pressure• Clear, easy to read face• Dovetails on top and back for all-around positioning

HALF ROUND COMBINATION HOLDER

• Two-point adjustment• 1/4" shank• For dovetail and 5/32"stem indicators

SELECT-A-POINT KITThe most useful accessory kit for all dial indicators - a complete set of 22 different points, increasing the versatility of your indicators.• Fits all AGD 1, 2, 3, 4 drop style indicators, 4-48 threads

CO-AX INDICATORHigh quality import version ofthe popular Co-Ax Indicator.Includes:• Retaining rod• Centre point feeler• 2", 4" and 6" straight feelers• 4", 8" and 12" curved feelers• .0005" graduations

SUPER MAG• 5 different locations for mounting accessories:– 3 positions 1/4-20 for lug mounts, 1 tapped hole10-32, 1 reamed hole 3/8"

• Size 4-1/2" x 1" x 1-1/4"

DIAL BORE GAUGE SETS

MAG BASE INDICATOR HOLDER DIAL TEST INDICATOR HOLDER SMALL HOLE GAUGE

RADIUS GAUGESSURFACE GAUGES

MINI MAGNETIC STANDS

RADIUS GAUGE SETS

SALEWidth Height Length Code No. Price $1/8” 1/2, 5/8, 3/4, 7/8, 1, 6” 230-863 74.63

1-1/8, 1-1/4, 1-3/8,1-1/2, 1-5/8

• Thin style, 1/8" thick• Matched pairs• Made of high grade steel alloy

• Hardened and ground• Tolerance ± 0.0003"

STEEL PARALLEL SETAll 10 Pairs Including Fitted Case

STEEL PARALLEL PAIRS

SALEW x H x L Hole Size Code No. Price $

1/8 x 1/2 x 6 13/64 230-200 7.481/8 x 5/8 x 6 1/4 230-205 8.081/8 x 3/4 x 6 5/16 230-210 8.081/8 x 7/8 x 6 5/16 230-215 8.081/8 x 1 x 6 5/16 230-220 8.08

1/8 x 1-1/8 x 6 3/8 230-225 8.081/8 x 1-1/4 x 6 3/8 230-230 8.081/8 x 1-3/8 x 6 7/16 230-235 8.081/8 x 1-1/2 x 6 1/2 230-240 8.081/8 x 1-5/8 x 6 1/2 230-245 8.08

13

PRECISION TOOLS

6 Piece Set

SALESizes Consisting of: Code No. Price $5⁄16–1/2, 1⁄2–3⁄4, 3⁄4–1-1⁄4, 200-710 29.161-1⁄4–2-1⁄8, 2-1⁄8–3-1⁄2, 3-1⁄2–65⁄16–2-1⁄8 200-712 21.00

• Satin-chrome finish• American NationalStandard

• 26 tapered leaf thickness gauges• 3" long

Range Graduation SALE(in) (in) Code No. Price $650 U.S. Standard, 60° 225-410 11.39652 Metric Standard, 60° 225-415 11.39

Range SALE(in) Code No. Price $

.0015 to .025" 606-050 24.14

• 48 wires – 16 different sizes• Measures all threads from 3 to 48 threadsper inch

• Laminated chart included in case• Furnished in vinyl case


Thread Measuring Set 200-870 14.71

Range Accuracy SALE(in) (in) Code No. Price $0-150 mm/0-6 0-150 ±0.03 201-050 55.590-200 mm/0-8 0-200 ±0.03 201-055 70.720-300 mm/0-12 200-300 ±0.04 201-056 109.14

This range of Vee blocks is made from finely selected tool steel fully hardened to 55-60 HRC. Manufactured and numbered in matched pairs, each pair has two 90° Vees of different capacitieswhich are identical to the Vees of its matching block. The Vee’s are ground central, parallel andsquare with the ends and sides.

SALEBlock Length (in.) Block Width (in.) Block Height (in.) Type Model No. Code No. Price $

1-19/32 1-1/4 1-1/4 Regular VB/SP/T-30 231-072 55.002 1-1/2 1-1/2 Regular VB/SP/T-35 231-074 65.88

2-3/4 1-3/4 1-5/8 Regular VB/SP/T-70 231-076 93.332-3/4 2-1/2 1-3/4 Non-Protruding VB/SP/R/T-70 231-078 125.804-7/8 3-1/2 2-3/4 Non-Protruding VB/SP/R/T-125 231-080 335.16

Model No.’s - VB/SP/T-30 & VB/SP/T-70 available as set in wooden case DUET/02 231-415 163.59

• Heat treated and case hardened to HRC 55-60• Precision ground and case hardened• Squareness of all sides is within .0001"• Parallel Accuracy 0.0003"• Surface finish 6–16 micro inches• 23 holes–5 are tapped in 3/8-16• Supplied in pairs

SALESize Description Code No. Price $1-2-3 23 Holes 230-870 26.952-4-6 23 Holes 230-872 220.071-2-3 No Hole (Pair) 230-874 27.20

SALEModel No. Specifications Code No. Price $

272A 1/32–17/64 x 64ths 225-230 22.36

Range SALE(in) Code No. Price $

1-10 TPI (29°) 225-450 30.35

Model No. SALENo. Leaves Range Code No. Price $472 34 4 to 84 225-315 46.67156M 28 0.25 to 2.50 mm 225-320 24.995628 28 4 to 80 225-325 26.615617 18 .5” to 7.00” 225-330 22.955629 28 4 to 56 .5-6.0mm 225-335 26.61

• With locking devices

Description Code No. Price $Machinery Handbook 28 180-105 156.00Large Print Version 28 180-115 190.40CD Rom Version 28 180-120 165.30Machinery Handbook Guide 28 180-110 23.90

Used to hold cylindrical workpieces forgrinding. Will hold both itself and thework on any flat ferrous surface,including a permanent magnet chuck(without energizing the chuck.) There are two vees:

• The smaller for workpieces up to.750" diameter and the larger forworkpieces up to 2.500" diameter


Magnetic vee blocks 225-710 85.17

Narrow Rules, Depth Gauge Rules

Round End Rules

SALEModel No. Description Graduations Code No. Price $7305-006 6" with clip 32nds one face, 64ths other face 606-156 10.377305-012 12" with clip 32nds one face, 64ths other face 606-158 18.537305-006 6" without clip 32nds one face, 64ths other face 606-160 7.317305-012 12" without clip 32nds one face, 64ths other face 606-162 18.287305-M06 6" with clip 32nds one face, 0.5 mm other face 606-164 10.377305-M12 12" with clip 32nds one face, 0.5 mm other face 606-166 18.537305-M06 6" without clip 32nds one face, 0.5 mm other face 606-168 5.617305-M12 12" without clip 32nds one face, 0.5 mm other face 606-170 13.697305-M15 150 mm with clip mm one face, 0.5 mm other face 606-172 10.377305-M30 300 mm with clip mm one face, 0.5 mm other face 606-174 13.017305-M15 150 mm without clip mm one face, 0.5 mm other face 606-176 7.317305-M30 300 mm without clip mm one face, 0.5 mm other face 606-178 18.28

SALEModel No. Description Graduations Code No. Price $7202-SS6 6" flex, not plated, round end rule with clip 32nds, 64ths 606-180 4.68

Decimal equivalent chart on back7203-SS6 6" flex, not plated, round end rule with clip mm, 64ths 606-182 4.68

Metric equivalent chart on back7202-C06 6" flex, chrome plated, round end rule with clip 32nds, 64ths 606-184 8.08

Decimal equivalent chart on back7203-C06 6" flex, chrome plated, round end rule with clip mm, 64ths 606-186 11.39

Metric equivalent chart on back

TELESCOPING GAUGES

RADIUS GAUGE

FEELER GAUGE

ACME GAUGE

CENTRE GAUGE

SCREW PITCH GAUGE

THREAD MEASURING SETS

MACHINERY HANDBOOK 2288TH EDITION

11--22--33 & 22--44--66 BLOCKS

DIGIMATIC SCALE UNIT

MAGNETIC VEE BLOCKS

SPECIALTY RULES

TOOL MAKER’S V-BLOCK & CLAMP SETS

14

Precision Tools

SALEModel No. Size (in) Code No. Price $YCT-SV20 2-1/2 x 2 230-700 154.70YCT-SV25 3-1/2 x 2-1/2 230-705 187.00YCT-SV30 3-1/2 x 2-7/8 230-710 237.75YCT-SV200 2-3/8 x 2 230-715 474.05YCT-SV250 2-7/8 x 2-1/2 230-720 447.02YCT-SC300 3-3/8 x 3 230-725 568.82

• Body is one solid piece of steel, hardened likethe rest of the sine vise to Rc 58-62

• Dual .200" minute steps for setting small angleswith standard gauge blocks are built into thegauge block roll

• All 7-1/2" x 3" sine vises have small horizontaland vertical vees in the moveable jaw

• Provides a quick and accurate means of holdinga workpiece at an angle for machining, drilling orgrinding

SALEWork Dia. Model No. Code No. Price $1-1/2 CS/1 231-320 15.473 CS/2 231-322 29.41

The knife edge is madefrom Spring Steel and ishardened and ground forextended life.

SALEDescription Code No. Price $Pen Scriber c/w carbide point 201-060 4.00Replacement carbide point 201-065 1.28

• Made of alloy steel, black oxide finish

• Collets grip firmly when chuck is tightened

• Knurled finger grip• Range of set 0 - .188"• Supplied in Plastic Pouch• Ideal for holding small tools, rods,wires, taps, etc.

Manufactured from selectedsteel, firm joint calipers areruggedly constructed and wellfinished. Size refers to thelength of the legs, their actualmeasuring capacity is aboutone-third greater than thegiven size of the legs.

Inside SALE Outside SALESize (in.) Code No. Price $ Code No. Price $

4 231-220 4.08 231-232 4.085 231-222 4.42 231-234 4.426 231-224 4.68 231-236 4.688 231-226 6.29 231-238 6.2910 231-228 10.03 231-240 10.0312 231-230 12.24 231-242 12.24

SALEModel No. Description Code No. Price $6000-004 4 pc. Pin Vise Set 606-228 13.606000-004A .000-.040 Pin Vise 606-230 3.746000-004B .032-.059 Pin Vise 606-232 3.746000-004C .052-.122 Pin Vise 606-234 3.746000-004D .118-.188 Pin Vise 606-236 3.74

Manufactured from selected steel, thelegs are exceptionally rugged and wellfinished. The leg that holds the adjustable point is offset. The locatinglug is incorporated in the straight leg.

SALESize (in.) Cat. No. Code No. Price $

6 JC/6 231-244 7.31

Description Code No. Price $Engineers Black Book Imperial version 180-155 45.70

Description Code No. Price $Fastener Black Book 180-156 46.00

• Imperial Version • Tables • Standards• Grind Wheels • Conversion Factors• Bolts & Nuts • Formulae• Tapers • Keys and Keyways• Tapping Drill Sizes • Speeds and Feeds• Tolerances • G Codes• Spur Gear Calculations • Engineering Drawing • Hardening and Tempering Standards• Sharpening Information • Geometrical Construction • Illustrations • Tungsten Carbide• Lubricants-Coolants • Equivalent Charts

• Weights of Metals

SALEBlade Size Beam Code No. Price $

2-3/8 1-3/8 230-340 20.153-1/8 2 230-345 23.805 3 230-350 30.52

6-1/4 4 230-355 42.597-7/8 5 230-360 51.68

• Accuracy Class H• Hardened steel squares• Accurate right angles both inside and outside

• Blades are beveled on both edges of each side

• Made from seasoned tool steel• Beams and blades are ground and accurately lapped for straightness and parallelism

• Set complete in fitted case• Size 3" long by 1/4" thick• Hardened steel, precision ground• Accuracy ± .0001" per inch

DK33-006 DK32-027

SALEModel No. Description Code No. Price $DK 33-006 1 pc. each 1°, 2°, 230-867 70.55

3°, 4°, 5°, 10°,15°, 20°, 25°, 30°

DK 32-027 1 pc. each 1°, 2°, 3° 230-865 138.894°, 5°, 10°, 15°, 30°

ETS/1 contains: Inside Caliper 4", Outside Caliper 4",Screw Cutting Gauge, Steel Rule 6", Pocket Scriber 3-1/2", and Centre Punch 5/32".

ETS/2 contains: Engineer’s Precision Square 4",Jenny Caliper 6", Steel Rule 6", Double Ended Scriber7-1/2", Centre Punch 5/32", Adjustable Tap andReamer Wrench, and Spring Divider 4".

SALEModel No. Code No. Price $ETS/1 231-278 39.27ETS/2 231-280 55.51

ETS/2ETS/1

THE ENGINEERS BLACK BOOK22ND EDITION AVAILABLE IN:

THE FASTENER BLACK BOOK

FIRM JOINT CALIPERS- INSIDE & OUTSIDE

JENNY CALIPERS - HERMAPHRODITE CALIPERS

SINE VISES UNIVERSAL ANGLE BLOCK SET

PIN VISES & SET

BEVEL EDGE SQUARES

PEN SCRIBER

ENGINEER’S TOOL SETS

CENTRE SQUARE

• Inch / Fasteners• ISO & DIN Specifications• Fastener Platings & Finishes• Pre-Loads & Tightening Torques• Thread Terminology & Classifications• Standard Grades, Tolerances & Markings• Thread Forms, Heads, Points, Materialsand Coatings

Includes a Free Thread Gauge!

15

PRECISION TOOLS

SALEDescription Blade Size (in) Code No. Price $Protractor head with magnifier lens 6 and 12 205-610 73.02

Blade SALELength (in.) Model No. Code No. Price $

2 SS/A/2 231-000 14.883 SS/A/3 231-010 14.884 SS/A/4 231-015 20.666 SS/A/6 231-020 26.359 SS/A/9 231-030 65.7912 SS/A/12 231-040 98.86

Set 1 SS/A/2-3-4-6 231-045 87.81Set 2 SS/A/2-4-6 231-050 73.02

SALENo. of Blocks Blocks Included Code No. Price $81 piece set 9–.1001-.1009 in .0001 steps, 49–.101-.149 in .001 steps, 200-715 158.10

19–.050-.950 in .050 steps, 4–1.000-4.000 in 1.000 steps

• For those who need a competitively priced B grade set• All blocks are manufactured to the same high standards as our premium sets

• Each set is supplied with a certificate guaranteeing that each block ismanufactured to meet or exceed federal spec GGG-G-15C, and iswithin the grade B tolerance (±.000050)

• This certificate does not show the individual deviation of each block• Each set is provided in a fitted wooden case

Comes with four interchangeable attachments.They can be snapped onto the chuck without removing the collet. Spring tension on the ball ofthe point.


Centre Finder complete with 231-300 27.804 attachments WCF/WZ-6

SALERule Length Code No. Price $

6" 231-274 11.82

The ability to measure depths and angles is combined in this versatile tool. The head is madefrom selected steel and has an attractive black finish.It is graduated both left and right to 15°, 30° and 45°and the rule can be set to any of these angles. A 6" (150mm) steel rule is fitted to the head and canbe locked in final position for depth or angular measurements by a knurled nut.

SALEType Code No. Price $Round 231-270 15.56

Rectangular 231-272 16.83

A versatile tool, the Depth Gauge with Protractorallows for measurement of both angles anddepths.• Stainless Steel• Graduations: 0-180° in opposite directions• 6" (150 mm) steel rule

SALEType Code No. Price $Round 231-266 13.94

Rectangular 231-268 15.13

This stainless steel protractor comes with either asemi-circular or a rectangular head. The head has permanently deep etched graduations, 0 to 180° inopposite directions thus permitting reading an angledirectly and also its supplement. The 6" (150 mm)blade has a graduation line on one end that permitsaccurate setting and reading of angles.

• Hardness: heat treated to a hardness of 60-62Rockwell C Drill Rod

• All members 2" long, centreless lapped• Size Electro etched in each piece• Finish: Each gauge inspected and has 10 microfinish or better

• Deluxe box with insert• Tolerance: Minus -.0002"/+.0000"

Gauge Set No. of Minus SALENo. Range Gauges Code No. Price $P-0 .011-.060 50 255-145 41.99P-1 .061-.250 190 255-040 90.44P-2 .251-.500 250 255-045 173.57P-3 .501-.625 125 255-150 173.32P-4 .626-.750 125 255-155 176.97P-5 .751-.832 82 255-160 181.31P-6 .833-.916 84 255-165 250.41P-7 .917-1.000 84 255-170 264.52

SSAALLEEOO..AA..LL.. MMooddeell NNoo.. CCooddee NNoo.. PPrriiccee $$9 & 12 MS/3-ST 231-250 4.254-1/2 MS/4 231-252 1.706 MS/MG/6 231-254 7.14

3-1/2 MS/P/3 231-256 4.007 MS/ST/9 231-258 2.64

6-3/4 MSCP/6 231-260 3.157-1/2 MS/7 231-262 2.649-3/16 MS/H/8 231-264 3.15

MMSS//33--SSTT

MMSS//44

MMSS//MMGG//66

MMSS//PP//33

MMSS//SSTT//99MMSS//77

MMSS//HH//88

MMSSCCPP//66

MS/3-ST 3 interchangeable threaded points, short straight, short bent and long bentMS/4 Single ended light dutyMS / MG/6 Tungsten carbide tip for marking on hard materials. Permanent magnet on the

other end for picking up small metal partsMS/P/3 Scriber point is held by a knurled chuck and can be reversed when not in useMS/ST/9 Single ended heavy dutyMSCP/6 Double ended – combining a needle point with a chisel endMS/7 Double ended with one straight point and one point bent at 90°MS/H/8 Double ended heavy duty with one straight point and the other bent at 90°

ENGINEER’S PRECISION SQUARES

DEPTH GAUGE WITH PROTRACTOR

PRECISION STEEL PIN GAUGE SETS

DEPTH AND ANGLE GAUGE

STANDARD RECTANGULAR GAUGE BLOCKSET WORKSHOP GRADE B

DEGREE PROTRACTORS

UNIVERSAL BEVEL PROTRACTORS

SCRIBERS

WIGGLER OR CENTRE FINDER

Hardened spring steel blades are permanently fixedto the stock by means of tapered self-locking rivetswhich ensure complete rigidity. Both the blade andstock are precisely ground to ensure straightnessand parallelism.

SOWATOOL & MACHINE CO. LTD.500 Manitou DriveKitchener, OntarioN2G 4B6

Toll Free: 1-800-265-8221Phone: (519) 748-5750Fax: (519) 748-9304Email: [email protected]: www.sowatool.com

Western Canada Branch9649-49th AveEdmonton, ABT6E 5Z5 *Cpre710*

PRECISION TOOLS

July 2010

Flyer No. CPRE710

SALEDescription Code No. Price $5 pc. X-Long Drive Pin Punch Set 606-238 24.141/8" X-Long Drive Pin Punch 606-240 3.833/16" X-Long Drive Pin Punch 606-242 4.251/4" X-Long Drive Pin Punch 606-244 4.515/16" X-Long Drive Pin Punch 606-246 4.683/8" X-Long Drive Pin Punch 606-248 4.85

• Made of tool steel• Punch section centreless ground• Handles black oxide for rust prevention• Knurled body for better grip• Hardened both ends, Rc 45 to 52• 8" length, drive pin section 3-1/2" long• Set supplied in fitted pouch with clear size markings

SALEModel No. Description Code No. Price $

P170 Standard duty 606-300 8.84P171 Heavy duty 606-302 22.02P171-P Replacement point 606-304 4.08

• Automatic, spring operated action• Adjustable for very light to heavy strokes• Replaceable point ground and hardened• Used for marking, punching, stalking and riveting

• Made of brass• Punch section centreless ground• Hexagonal body style• Used in spark-free environments• 4" length• Set supplied in fitted pouch withclear size markings

SALEDescription Code No. Price $8 pc. Brass Drive Pin Punch Set 606-268 32.901/16" Brass Drive Pin Punch 606-270 4.683/32" Brass Drive Pin Punch 606-272 4.681/8" Brass Drive Pin Punch 606-274 4.685/32" Brass Drive Pin Punch 606-276 4.683/16" Brass Drive Pin Punch 606-278 4.687/32" Brass Drive Pin Punch 606-280 4.681/4" Brass Drive Pin Punch 606-282 4.68

SALEModel No. Description Code No. Price $6304-003 3 pc. set 606-298 8.59

• Made of tool steel• Black oxide finish for rust prevention• Knurled body for better grip• Hardened both ends, RC 45 to 52• 4" length• Supplied in fitted case• Set contains: 5/32" drive pin punch5/32" centre punch and scriber

Stamp SALEDescription Size Code No. Price $

27pc, A - Z, plus “&” stamp 1/8 606-615 29.583/16 606-620 42.251/4 606-625 53.04

Manufactured from high qualitysteel, punches are through induction hardened, which givesdurability and extended life evenafter repeated use.


8pc 1/16 - 7/32 606-635 37.66


1/16, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8 606-630 41.06

• One piece construction with roundstriking head.The knurling is cleanand well cut to provide a positivefinger grip. This range of puncheshave a black oxide finish.

• These round shank pin puncheshave clean and well cut knurlingwhich provides positive, non slipgrip. This range of punches have ablack oxide finish.

28 Punches in MetalIndexed Stand• Heat treated temperedsteel

• Consists of one each ofpunch sizes 3/32 thru1/2 x 64th plus 17/32 inmetal indexed stand


3/32 thru 1/2 x 64th plus 17/32 200-750 18.36

SALEDescription Code No. Price $8 pc. Drive Pin Punch Set 606-250 20.491/16" Drive Pin Punch 606-252 2.383/32" Drive Pin Punch 606-254 2.381/8" Drive Pin Punch 606-256 2.385/32" Drive Pin Punch 606-258 2.383/16" Drive Pin Punch 606-260 2.387/32" Drive Pin Punch 606-262 2.381/4" Drive Pin Punch 606-264 2.385/16" Drive Pin Punch 606-266 2.89

• Made of tool steel• Punch section centreless ground• Handles black oxide for rust prevention• Knurled body for better grip• Hardened both ends, Rc 45 to 52• 4" length• Set supplied in fitted pouch with clear size markings

• Made of tool steel• Black oxide finish for rust prevention• Knurled body for better grip• Hardened both ends, RC 45 to 52• Points precision ground• 4" length, 1/16" diameter,punch 3" long

• Set supplied in fitted case with clear size markings

SALEStyle Description Code No. Price $5 pc. set 1/16, 5/64, 3/32, 9/64, 5/32 606-286 13.01Individual 1/16 606-288 2.30Individual 5/64 606-290 2.30Individual 3/32 606-292 2.30Individual 9/64 606-294 2.30Individual 5/32 606-296 2.30

Stamp. SALE$Description Size Code No. Price $9pc, 0-9 1/8 606-600 9.95

3/16 606-605 14.111/4 606-610 17.68

Manufactured from high qualitysteel, punches are through induction hardened, which givesdurability and extended life evenafter repeated use.

SALEDescription Code No. Price $1/8, 3/16, 1/4, 5/16, 3/8 606-650 41.31

• Single piece construction withhexagonal shank. Single piece construction imparts additional durability to the punch. The pin endis ground with the body in premiumpowder coated finish.


5pc set 5/64-3/8 606-640 28.99*7pc set 5/64-3/8 606-645 39.10

• Single piece construction withhexagonal shank, these are oneof the strongest and mostdurable of Centre Punches. Thepunches have ground workingends, with the body in premiumpowder coated finish.

* extra 5/32 & 1/4 c/w larger stock

SALEModel No. Code No. Price $KIT/14 606-655 86.11

Contents:• 5 Octagonal Cold Chisels,3/8, 1/2, 5/8, 3/4, 7/8• 2 Heavy Duty Centre Punches 5/32, 1/4• 3 Heavy Duty Pin Punches 1/16, 1/8. 3/16• 2 Heavy Duty Drift Punches 1/8, 5/32• 2 Heavy Duty Starting Punches 5/16, 1/8

TRANSFER PUNCH SET BRASS DRIVE PIN PUNCHES AND SET

CENTRE PUNCHES

EXTRA LONG DRIVEPIN PUNCHES AND SET

55PC X-LONG PIN PUNCHSET - VINYL POUCH

88 PC PIN PUNCH SETWOODEN CASE

HEAVY DUTY CENTREPUNCH SET

DRIVE PIN PUNCHES AND SET COMBINATION PUNCH SET

NUMBER STAMP SETS

LETTER STAMP SETSAUTOMATIC CENTRE PUNCHES

1144 PC PUNCH AND CHISEL SET

88 PC CENTRE PUNCH SET

per cision tool

Documents