perform achieve and trade -...
TRANSCRIPT
PERFORM ACHIEVE AND TRADE
(PAT)
2
Introduction about National Action Plans (NAPCC)
National Mission for Enhanced Energy Efficiency (NMEEE)
PAT – The NEEDs
PAT –The Journey
PAT in state of Uttar Pradesh
Target in PAT
Threshold limit Sector Wise
Ranges of SEC
Monitoring and Verification Process
Performance Assessment Document
Calculation of ESCerts
FOCUS AREA’S
3
India is faced the challenge of sustaining its rapid economic growth while dealing with the global threat of climate change.
This threat emanates from accumulated Green House Gas emissions in the atmosphere, anthropogenically generated through long-term and intensive industrial growth.
India needs a National Strategy to Adopt to climate change To further enhance the ecological sustainability of India’s development
path
With the help of United Nations Framework Convention on Climate Change (UNFCCC); Hon’ble Prime Minister of India launched National Action Plan on Climate Change (NAPCC) on 30th June’2008.
NAPCC outlines a comprehensive policy framework that seeks to protect the poor and vulnerable sections of society through an inclusive and sustainable development strategy, sensitive to climate change.
INTRODUCTION ABOUT NATIONAL PLANS
4
NAPCC was further categorised in 8 National Mission
National Solar Mission National Mission for Enhanced Energy Efficiency National Mission on Sustainable Habitat National Water Mission National Mission for Sustaining the Himalayan
Ecosystem National Mission for a Green India National Mission for Sustainable Agriculture National Mission for Strategic Knowledge for Climate
5
The National Mission for Enhanced Energy Efficiency (NMEEE) is one of the eight national missions with the objective of promoting innovative policy and regulatory regimes, financing mechanisms, and business models which not only create, but also sustain, markets for energy efficiency in a transparent manner with clear deliverables to be achieved in a time bound manner.
Perform Achieve and Trade (PAT): Market The market basedmechanism to enhance the cost effectiveness in improving theEnergy Efficiency in Energy Intensive industries throughcertification of energy savings which can be traded.
Market Transformation for Energy Efficiency (MTEE):Accelerating the shift to energy efficient appliances in designatedsectors through innovative measures to make the products moreaffordable.
Energy Efficiency Financing Platform (EEFP): Creation ofmechanisms that would help finance demand side managementprograms in all sectors by capturing future energy savings.
Framework for Energy Efficient Economic Development(FEEED): Developing fiscal instruments to promote energyefficiency.
Efficiency 51%
Renewables 32%
Biofuels 1%
Nuclear 8%
CCS 8%
Share of cumulative abatement between 2010-2035
WEO, 2010
Nation Mission for Enhanced Energy Efficiency (NMEEE)
6
The Perform Achieve Trade (PAT) is an innovative, market-based trading scheme announced by the Indian Government in 2008 under its National Mission on Enhanced Energy Efficiency (NMEEE) in National Action Plan.
It aims to improve energy efficiency in industries by trading in energy efficiency certificates in energy-intensive sectors.
The 2010 amendment to the Energy Conservation Act (ECA) provides a legal mandate to PAT. Participation in the scheme is mandatory for Designated Consumers under the ECA.
Energy Conservation Act, 2001, empowers the Central Government to notify energy intensive industries, as listed out in the Schedule to the Act, as Designated Consumers (DCs).
.
PAT – THE NEEDS
7
2001 2014-2015
Energy Conservation Act enacted
National Action Plan on Climate Change released
Sector studies Commenced toidentify DCs
Baseline datacollection begins
Financial outlay of overUS$20 million approved
National Mission for Enhanced Energy Efficiency (NMEEE) Approved by Ministry of Power
Nation wide Consultation Workshops organised;consultation continues through 2012
NMEEE approved by Prime Minister's Councilon Climate Change
Energy Conservation Actamended to make provisions for issue of energy saving certificates, imposition of penaltyfor non compliance and tradingOf ESCerts
Perform, Achieve and Trade(PAT) scheme came into effect;first compliance period begins (2012-2015)
2008 2009 2010 2011 2012
PAT –THE JOURNEY
Covers 478 plants in 8 Energy intensive industry ( Aluminum, Cement, Chlor-alkali, Fertilizer, Iron & Steel, Paper & Pulp, Textile and Thermal Power Stations),and gate to gate boundary concept adopted.
Energy consumption of these plants was about 1/3rd of the total energyconsumed in India in the baseline year (2009-10).
Large variations in energy intensities of different units in almost every sector Key Goal :Mandate Specific Energy Consumption improvement Energy Intensity reduction target for each unit based on its current efficiency in
base line (2009-10) Multi- cycle process –First PAT cycle till 2014-15 Approach - Consultative
Base line Studies completed,Draft PAT Rules prepared and feed back sought on draft targets
Assessment year of First PAT Cycle
8
Sectoral Share in Energy Saving Target (%)(2012-15)
8
S.NO. Sectors
No. of Identified
DCs
Annual Energy
Consumption (Million
toe)
Share Consumpti
on (%)
Apportioned Energy
Reduction For PAT Cycle-1
(Million toe)
1 Power (Thermal) 144 104.56 63.38% 3.211
2 Iron & Steel 67 25.32 15.35% 1.4863 Cement 85 15.01 9.10% 0.8154 Aluminium 10 7.71 4.67% 0.4565 Fertilizer 29 8.20 4.97% 0.4786 Paper & Pulp 31 2.09 1.27% 0.1197 Textile 90 1.20 0.73% 0.0668 Chlor- Alkali 22 0.88 0.53% 0.054
Total 478 164.97 100.00% 6.686
PAT – SECTORAL ENERGY SAVING TARGET
9
The PAT Scheme is being implemented in three phases- the first phase runs from 2012-2015 covering 478 facilities from eight energy-intensive sectors, namely Aluminum, Cement, Chor-alkali, Fertilizer, Iron and steel, Pulp and Paper, Textiles and thermal power plants.
27 DCs are present in state of Uttar Pradesh out of 478 DCs; which are categories in 7 sectors: Aluminum : 01 Cement: 02 Chlor-Alkali: 01 Fertilizers: 07 Iron & Steel: 01 Paper & Pulp: 03 Thermal Power Plants: 12
PAT IN STATE OF UTTAR PRADESH
10
TARGET IN PAT
Target is defined as the % reduction of ‘Specific Energy Consumption (SEC)’ from Baseline value.
Plant System Boundary
All forms of Energy Product
E P
SEC = E / PSEC
Y1 Y2 Y3
Baseline SEC
Target SECReduction in SEC
Expressed in %
11
THRESHOLD LIMIT SECTOR WISE
Aluminum Industry : 750 toe
Cement Industry : 30000 toe
Chlor- Alkali : 12000 toe
Fertilizer : 30000 Mtoe
Iron & Steel : 30000 toe
Pulp & Paper : 30000 toe
Textile : 3000 toe
Thermal Power Plant : 30000 toe
*1 toe = 11.63 megawatt-hours (MWh) * 1 toe = 41.868 gigajoules (GJ)
*1 toe = 10 gigacalorie (Gcal)
12
SECTORAL STUDIES BY BEE ON ‘SETTING UP OF SECTORAL BANDWIDTH FOR DCS’ HAVE REVEALED THE IMPACT ON SEC DUE TO ABOVE DIVERSITIES
Sector Range of SEC
Power plant 2300 – 3400 kcal / kwh
Fertilizer 5.86 – 9.11 Gcal/T of Urea
Cement 665 – 900 Kcal/Kg of Clinker (Thermal)
66 – 127 KWH/ T (Elect)
Integrated Steel 6.15 – 8.18 Gcal / tcs
Sponge Iron 4.4 – 7.6 Gcal / T (Thermal)
72 – 135 KWH/T (Elect)
Aluminium (Smelter)
Aluminium (Refinery)
15000-16000 KWH/T
3.28 – 4.12 MKcal / T of Alumina
Pulp & Paper 25.3 – 121 GJ/T
Textile 3000 – 16100 Kcal/kg (Thermal)
0.25 – 10 KWH/Kg (Elect)
Chlor-Alkali 2300 – 2600 kwh/ T of caustic soda
13
Engagement of EmAEAs
Preparation of Performance
Assessment Document by DCs
(PAD or Form A)
Verification of PAD by EmAEA
(Form B)
DC submits FORM I, FORM A, FORM B, Sectoral proforma,
supporting documents to SDA with a copy to
BEE
SDA will Check for Completeness and Consistency of the
submitted documents
SDA submits to BEE with due diligence
BEE conducts its verification and
submits to Central Government
Central Government Issues the ESCerts
Market for Trade
Monitoring and Verification MONITORING AND VERIFICATION PROCESS
14
PERFORMANCE ASSESSMENT DOCUMENT
Below forms to be filled by designated Consumers Form – I
Form – A
Form – B
15
EMPANELLED ACCREDITED ENERGY AUDITOR (EMAEA)
A firm registered under the Indian Partnership Act, 1932 (9 of 1932) or acompany incorporated under the Companies Act, 1956 (1 of 1956) or anyother legal entity competent to sue or to be sued or enter into contracts shallbe entitled to undertake verification and check-verification regardingcompliance with the energy consumption norms and standards and issue orpurchase of energy savings certificate if it –
(a) has at least one accredited energy auditor whose name is included in thelist of the accredited energy auditors maintained by the Bureau underregulation 7 of the Bureau of Energy Efficiency (Qualifications for AccreditedEnergy Auditors and Maintenance of their List) Regulations, 2010;
(b) has at least three certified energy auditors;
(c) has adequate expertise of field studies including observations, probing skills,collection and generation of data, depth of technical knowledge andanalytical abilities for undertaking verification and check-verification;
(d) has a minimum turnover of ten lakhs rupees per annum in at least one of theprevious three years or in case of a newly formed organization, a net worth of tenlakhs rupees.
16
ESCerts = Baseline notified production * ( Notified Target SEC – Normalised assessment SEC)
Central Govt. after receiving recommendation from Bureau issue ESCerts of desired value to DC within 15 working days.
ESCerts shall only be in electronic form
1 ESCerts= 1 toe
The DC who has been issued energy savings certificates may sell them through the power exchange.
ESCerts issued in current cycle shall remain valid till compliance period of next cycle.
ESCerts purchased by DC for compliance shall after their submission to Bureau stand expire.
CALCULATION & PROCEDURE FOR ISSUE OF ESCERTS
17
Activities TimelinesSubmission of Form 1 Once in a yearSubmission of Form A(Performance Assessment Document)
Once in 3 years
Submission of Form B(Verification by EmAEA)
Once in 3 years
Submission of Sector Specific Proforma
Once in a years
Issuance of ESCerts Once in a yearSubmission of Form D(Performance Compliance Document)
Once in 3 years
KEY TIMELINES