performa edge metal_fascia_and_coping_from_imetco-brochure

© Copyright 2010, Innovative Metals Company, Inc.

4648 S. Old Peachtree Rd • Norcross, GA 30071www.imetco.com • (800) 646-3826

FasciaCopingand

Systems


www.imetco.com

R031011 © Copyright 2010, Innovative Metals Company, Inc.

Any Building In Any Place At Any Time

Could Be Called Upon to Protect the Contents Within

The turn of the century brought a rash of severe weather events and the promise of a dynamic climate that will continue to produce these natural assaults. Experts around the world agree that we are at the precipice of an extreme weather era. Whether due to global warming or simply following cyclical trends, it seems clear that the frequency and severity of high-velocity wind events will continue to place demands on our structural environment.

Some of the more notorious storms of the decade precipitated intensive study of the vulnerability of roofing systems by organizations such as the Roofing Industry Committee on Weather Issues (RICOWI) and Factory Mutual Global (FM). These studies revealed that the vast majority of all weather-related losses (75%) were due to roof failures, and of those, more than half were due to perimeter failure.

As a result, building codes and standards have evolved to demand better design and performance of roofing systems. The 2003 and subsequent editions of the International Building Code (IBC) contain provisions requiring edge-metal flashings (copings, fascia, gravel stop) to be designed and installed in accordance with ANSI/SPRI ES-1, “Wind Design Standard for Edge Systems Used with Low Slope Roof Systems.”

1504.5 Edge securement for low-slope roofs. Low-slope membrane roof system metal edge securement, except gutters, shall be designed and installed for wind loads in accordance with Chapter 16 and tested for resistance in accordance with ANSI/SPRI ES-1, except the basic wind speed shall be determined from Figure 1609.

Although these studies and the adoption of the ES-1 standard by IBC are most directly attributable to the destruction inflicted by hurricanes, events such as straight-line winds and tornadic activity associated with common seasonal storms inflict wide-spread damage each year. FEMA has divided the United States into four zones that reflect the number and strength of extreme windstorms encountered in each region. The tables to the right clearly illustrate that no area is immune to wind-related roofing damage.

© Copyright 2010, Innovative Metals Company, Inc.© Copyright 2010, Innovative Metals Company, Inc.(800) 646-3826

–3–

That’s Why We Bring You PerformaEdge

A line of performance-inspired Edge Systems from IMETCO

ES-1 CertificationEdge Systems from IMETCO have successfully passed the three tests required by the ANSI/SPRI ES-1 standard:

1. RE-1: Roof Edge Termination TestThe RE-1 test evaluates the perimeter attachment to a minimum holding power of 100 pounds per foot. The membrane is pulled at a 45-degree angle to the roof deck to simulate a billowing. Failure occurs when the membrane detaches from the edge termination, or the termination detaches from its mounting.

2. RE-2: Pull-off Test for Metal Edge FlashingRE-2 evaluates the strength of the metal edge flashing to ensure that the fascia system meets or exceeds the building’s calculated design wind pressure. An incremental load is applied to the face of the specimen and held for 60 seconds, then removed and increased in increments of 25 psf until 150 psf, then increments of 10 psf are applied thereafter. The results must meet or exceed the calculated design pressure of the building. Failure occurs with securement loss of any component of the roof edge, or deformation that would hinder weather protection at the edge.

3. RE-3: Pull-off Test for Metal Wall CopingRE-3 evaluates the strength of a metal coping cap to ensure that it meets or exceeds the building’s calculated design wind pressure. Incremental loads are applied as with the RE-2 test, where the load is applied to the face and top simultaneously. Failure occurs with the securement loss of any component of the roof edge system, or deformation that would hinder weather protection at the edge.


www.imetco.com


ES-FX™ Series FasciaIMETCO’s line of Edge Systems includes our strongest and most versatile fascia, the ES-FX. This extruded aluminum fascia is compatible with most of the roof systems marketed today. From multi-ply built-up roofs to single ply systems to thicker modified bituminous membranes, the ES-FX fascia system can easily adjust to each one.

Face dimensions of the ES-FX fascia system provide coverage for up to three nailers. Engineered with its VariTightTM flashing component, ES-FX allows for installation with various roof membrane types and thicknesses without any penetration of the membrane. The VariTightTM screws supplied with the system allow for removal and replacement of the fascia cover in retrofit applications, helping to reduce costs and to expedite project completion. The consistent and crisp lines of the extruded cover cannot be matched by a formed product.

• ANSI/SPRI ES-1 approved• Tested face dimensions up to 10 inches• Engineered 3-piece design allows various roof

membrane thicknesses• 20-year Blow-Off / Leak-Tight warranty available• 20-year finish warranty available• 10-foot standard length• 22-gauge galvanized steel cant dam• Fascia fasteners included• Concealed 6-inch splice plate • Heavy gauge extruded aluminum cover • Post-coated Kynar® standard and custom colors• Mill finish available • Corners & accessories mitered and welded in factory• Does not penetrate roof membrane• Fully welded radii available

ES-FX Fascia

Product: Face Size:

ES-FX600 6.0 inches

ES-FX700 7.0 inches

ES-FX775 7.75 inches

ES-FX850 8.5 inches



SPECIFY

2 1/2"

1"CANT DAM x 10'-0"

6" CONCEALED SPLICE PLATE @ EACH JOINT

MEMBRANE FLASHING (by OTHERS)

1 1/4" ROOFING NAIL @ 12" o.c. MAX.(by OTHERS)

FASCIA COVER x 10'-0"

FASTENER @ 18"o.c. (by IMETCO)

VARI-TIGHT FLASHING (by IMETCO)


1 3/4"


–5–

ES-F™ Series FasciaThe old-school gravel stop and fascia of the past is no longer acceptable for most roof systems of today. Fascia systems must be tested and approved to meet the ANSI/SPRI ES-1 standard as required by the IBC.

Once again, with its line of fully tested Edge Systems, IMETCO demonstrates its commitment to our customers by providing a full line of performance-inspired fascia and coping for use with built-up, single ply, and modified roofing systems.

Features and Benefits:• ANSI/SPRI ES-1 approved• Tested face dimensions up to 9½ inches• Two-piece design• 10-foot standard lengths (other lengths available)• 22-gauge galvanized steel cant dams• Concealed 6-inch splice plate • Factory fabricated corners and accessories• Does not penetrate the roof membrane• No exposed fasteners• Installs securely with various membrane thicknesses• 20-Year Blow-Off/Leak-Tight Warranty available• 20-Year Finish Warranty available

Materials and Coatings• .040, .050 & .063 aluminum • 24- and 22-gauge galvanized steel• 24- and 22-gauge stainless steel• Pre-finished Kynar® coated aluminum & steel standard• Post-coated Kynar® custom colors available

SPECIFY

1 1/2"

1/2"

1/2"

1 3/4"

FASCIA CANT x 10'-0"


MEMBRANE FLASHING (by OTHERS)


FASCIA COVER x 10'-0"


ES-F Fascia

Product: Face Size:

ES-F500 5.0 inches

ES-F650 6.5 inches

ES-F800 8.0 inches

ES-F950 9.5 inches


www.imetco.com


ES-C™ Series CopingEdge Systems from IMETCO are engineered for performance. A leader in highly engineered structural standing seam metal roofing, IMETCO understands the need for tested and secure metal Edge Systems. IMETCO tests our coping system based on the “real-life” ANSI/SPRI ES-1 method to meet or exceed your specific project requirements. That’s why our ES-C Series Coping system is one of the strongest in the industry.

Features and Benefits:• ANSI/SPRI ES-1 approved• Tested wall widths up to 24 inches• Tested face dimension up to 6 inches• Snap on design• 10-foot standard lengths (other lengths available)• Install on wood nailers, masonry or steel parapet walls• Heavy-gauge galvanized steel anchor plates (5’ o.c.

standard placement)• Anchor plate fasteners included• Concealed 6-inch splice plate with butyl sealant tape• Mitered & fully welded corners, end caps, transitions, etc.• Single slope and peaked profiles• Fully welded radii• 20-Year Blow-Off/Leak-Tight Warranty available• 20-Year Finish Warranty available

Materials and Coatings• .040, .050, .063, .080 & .125 aluminum • 24- and 22-gauge galvanized steel• 24- and 22-gauge stainless steel• Pre-finished Kynar® coated aluminum and steel

standard• Post-coated Kynar® custom colors available

(ACTUAL WALL WIDTH)

"A"

"B""C"

(4" STD.)

(4" STD.)

1/4"

3/4"

CLEARANCE FORWALL VARIATIONS

1 3/8"

COPING COVER x 10'-0"


ANCHOR PLATE @ 5'-0" o.c.

(4) FASTENERS PER ANCHOR PLATE

1 3/4"

(ACTUAL WALL WIDTH)

"A"

"B" "C"(4" STD.)(4" STD.)

1/8" CLEARANCE FORWALL VARIATIONS

1/8"

3/4"5/8"

COPING COVER x 10'-0"


ANCHOR PLATE @ 5'-0" o.c.

(4) FASTENERS PER ANCHOR PLATE

ES-C Sloped Coping

ES-C Peaked Coping


–7–

4"

(SPECIFY)

(SPECIFY)

EQUAL

EQUAL

1 1/2"

(SPECIFY)

1 1/2"

1 1/2"

4"

(SPECIFY)

SPECIFY

(ACTUAL WALL WIDTH)

"A"

"B" "C"(4" STD.)(4" STD.)

5/8"5/8"

7/8"

(ACTUAL WALL WIDTH)

"A"

"B""C"

(4" STD.)

(4" STD.)

5/8"

7/8"

(SPECIFY)

1"

1" 1"

(SPECIFY)

(SPECIFY)

1"

1" 1"

(SPECIFY)

2"

1"

(SPECIFY)

(SPECIFY)

EZ Edge™ Formed LineIMETCO’s EZ Edge line combines quality with economy. These products offer proven reliability and pleasing aesthetics at a lower cost than performance-inspired edge systems. For use with built-up, single-ply and modified roofing systems, all of the EZ Edge products are available with a 20-year Kynar® finish warranty. EZ-Edge fascia and coping is available with a weather-tight warranty up to 10 years.

Features and Benefits:• Factory fabricated and field proven• Standard & project-specific profiles

& sizes • Simple, strong design• 10-foot standard lengths

(other lengths available)• Concealed 6-inch splice plates • Factory-made corners, end caps, etc. • Mitered and fully welded corners,

end caps, transitions, etc. available• Welded radius coping, fascia & gutter • 20-Year Finish Warranty available

Materials and Coatings• .032, .040, .050, .063, .080 & .125

aluminum • 24- and 22-gauge galvanized steel• 24-gauge stainless steel• Pre-finished Kynar® coated

aluminum and steel standard• Post-painted Kynar® custom colors

available

EZ Edge Sloped and Peaked Coping

EZ Edge Formed Fascias and Extender

EZ Edge “A” and “D” Style Gutter, and Downspout

Premium CollectionPlatinum Silver Roman Copper

Brite Copper Champagne

Preweathered Galvalume Galaxy Blue

IMETCO’s 28 standard, designer and premium colors are all “cool” colors, with SR measurements of .25 or better. Custom colors and specialty finishes are also available. Ask your IMETCO representative for more information.

The Total SolutionIMETCO offers a full line of metal roofing, wall, and edge systems and accessories. Be sure to ask your representative for information about other products and solutions from IMETCO, such as:

Series 300® Standing Seam Metal Roofing System• Precision engineering for long-term

weather-tight performance• Rigorously tested to be leakproof and

to withstand hurricane-force winds• Ideal for structural or architectural

applications• One-piece clip facilitates unlimited

thermal movement• 2⅜-inch high symmetrical seam with

a separate, easy-to-install seam cap• Factory-applied hot-melt sealant that

remains isolated from the clip• Can be curved or tapered

Total Metal Roof & Deck System• IMETCO Series 300® standing seam

metal roofing• Martin Fireproofing Perform-A-Deck

metal roof deck system• Tested to resist extreme winds and

impact from wind-born debris, as recommended by FEMA 361: Design and Construction Guidance for Community Safe Rooms

• Single source warranty covers complete assembly

AquaBlock™ Underlayment• Heat tolerant (250+°f)• Engineered for metal and tile roofing• Self-adhering, self-sealing• 100% SBS-modified• 90-day exposure resistance

The IMETCO AdvantageFor more than a decade, we at IMETCO have enjoyed our reputation as a manufacturer committed to providing products of only the highest quality. Our staff comprises expertise in metal roofing, design, engineering, testing, code compliance, manufacturing, and more. Above all, our staff excels in providing unparalleled customer service.

At IMETCO, your satisfaction is our only

measure of success!

4648 S. Old Peachtree Rd • Norcross, GA 30071 800.646.3826 (p) s 770.908.2264 (f)

www.imetco.com

Standard CollectionIrish Mist Almond Suede Emerald Forest Blue Sapphire

Tuscan Slate Epic Bronze Solar White Cadet Gray

Sandstone Chestnut Georgian Brick Opal Star

Colonial Red Silver Cloud Wedgewood Weathered Copper

Designer CollectionIron Mountain Cardinal Red Carolina Coast

Natural Patina Caribbean Coral Merlot

* Signature and Prestige Collections are available for select products. Special conditions may apply. Contact your IMETCO representative for more information.

Galvalume® is steel pre-treatment and a registered trademark of Biec International Inc. Hylar® is a fluorocarbon paint finish available on our metal products, and is a registered trademark of Ausimont USA Inc. Kynar® is a fluorocarbon paint finish available on our metal products, and is a registered trademark of Elf Atochem North America Inc.

FM® (Factory Mutual) is a world leader in property loss prevention and control engineering, research, and training. Its research-based recommendations set new standards that reduce the chance of property loss due to fire, weather conditions, and failure of electrical or mechanical equipment. It is a registered trademark of Factory Mutual Global, and must be identified as such whenever referred to in print.

Series 300® and all other trademarks are owned by Innovative Metals Company, Inc. (IMETCO).

The colors above are for reference only. To select your final color, please request a metal color sample.

Signature Collection* Prestige Collection*

CopperTextureMatte Stainless Steel

United Zinc: Onyx Black

United Zinc: Glacier Gray

Field Stone

Quartz

Antiqu Bronze Acrylic Galvalume

Artisan Steel Copper Patina

performa edge metal_fascia_and_coping_from_imetco-brochure

Business

roof edge system

roof edge termination

inspired edge systems

certification edge systems

metal edge flashing

ansispri es

lowslope roof systems

imetco es