personal data dr khairanum bt subari address...
TRANSCRIPT
1
PERSONAL DATA Name PROFESSOR DATO’ DR KHAIRANUM BT SUBARI
Address President’s Office
Universiti Kuala Lumpur
1016 Jalan Sultan Ismail
50250 Kuala Lumpur
Contact [email protected]
Tel : 603 2175 4000 (DL 603 2175 4141)
Fax : 603 2175 4333
Position Deputy President
Student Development & Campus Lifestyle
EMPLOYMENT 1988 - 1990 School of Physics Guru Universiti Sains Malaysia 1994 - 2001 School of Industrial Technology Lecturer Universiti Sains Malaysia 2001 - 2004 School of Mechanical Engineering Lecturer 2004 - 2005 Engineering Campus Assoc Prof Universiti Sains Malaysia 2005 -2007 Dean’s Office UniKL MSI Dean Kulim Hi Tech Park 09000 Kulim, Kedah 2007-2008 UniKL Chancellery Project Director 1016 Jalan Sultan Ismail 50250 Kuala Lumpur 2008 – 2013 Dean’s Office UniKL MITEC Dean/Head of Campus Persiaran Sinaran Ilmu, Bandar Seri Alam 81750 Johor Bahru, Johor Darul Takzim 2013 – present President’s Office Deputy President UniKL Chancellery Student Development & Campus Lifestyle
2
EDUCATION Ph.D 1994 School of Mechanical and Manufacturing Engineering University of Birmingham, U. K. M.Sc 1987 School of Physics Indiana State University, U. S. A. B.Sc 1884 School of Physics Indiana State University, U. S. A. AWARDS Best Paper 13th International Conference on ISO 9000 &
TQM (13-ICIT) 24 – 26 March 2008 Kuala Lumpur
Training Research Grant Asian Development Bank (ADB) at Department of Automatic Control
and Systems Engineering University of Sheffield, U. K. Nov. 1995 – February 1996 Academic Staff Higher Public Service Department and USM Education Scheme Award
at School of Mech. And Manuf. Engineering University of Birmingham, U. K. Sigma Phi Sigma Physics Honor Society, Indiana State
University, USA
CURRENT PORTFOLIO
Student Development & Campus Lifestyle (SDCL) 2016 - ongoing
1. Develop Ulul Albab program at 4 campuses as initial project – done
2. Develop UniKL Wakaf project – on going
3. Develop Best Practices for University Experience CL-CS – on going
4. Monitor GHOCs and Student Journey progress
5. Develop UniKL Signature CSR – on going
6. Develop UniKL Leadership Program for Student leaders – on going
7. Develop UniKL Career Advisory Centre – on going
8. Research SD-CITC on Graduate Employability – on going
3
9. Enhancement of MeSRA strategies on New and International Markets – on
going
10. Expand Student Financial Support funds and sources – on going
11. Enhanced Student support services to Boost Customer-based approach – on
going
Student Development & Campus Lifestyle (SDCL) 2013 - 2015
1. Develop an Integrated Value Based Learning & Teaching Model for UniKL -
completed
2. Develop High Order Critical Skills (HOCs) for Student Character Building –
completed
3. Develop UniKL Student Profiling – completed
4. Develop Student Character Building via JPAM - completed
5. Develop On-Line Student Events and Activities System – completed
6. Develop an Innovative Teaching & Learning for English and Pengajian Islam
– completed
7. Task Force for UniKL Residences Status – completed
8. UniKL Residences Standards – completed
9. Develop Work-Study Scheme – completed
10. Enhanced University Social Responsibility (USR) via UniKL CARE – on-going
11. Enhanced MeSRA (Marketing, Student Recruitment and Admission) – on-
going
4
TEACHING & SUPERVISION
School of Physics, USM
1. Electrical and Electronic Laboratory - First year BSc
2. Nuclear Physics - Diploma of Laboratory Technology
School of Industrial Technology, USM
1. Strength of Material
2. Design of Experiment
3. Metrology
4. Digital Systems and Metrology Laboratory
5. Electric Circuits
6. Electrical Laboratory
7. Semiconductor Devices
8. Semiconductor Devices and Electrical Machine Laboratory
9. Quality Control
School of Mechanical Engineering, USM
1. Production and Operations Management
2. Design of Production System
3. Engineering Management (Human Resource Management)
4. Quality and Reliability
5. Industrial Ergonomics and Safety
UniKL Malaysian Spanish Institute
1. Production Management
UniKL IPROM
1. Quality Engineering
UniKL MITEC
1. Introduction to Quality
5
Areas Of Expertise/Consultations :
TQM
1. Overview of TQM
2. 7 Basic Quality Tools
3. 7 Management and Planning Tools (7 New Quality Tools)
4. Benchmarking/Performance Evaluation
Quality Engineering & Technology Management
1. Basic Statistics/Data Collection & Evaluation
2. Industrial Statistics
3. Statistical Process Control
4. Design of Experiment (DOE)
5. Taguchi Techniques/Optimization
6. Failure Mode & Effects Analysis (FMEA)
7. Cost of Quality
8. Artificial Intelligence in Manufacturing
9. Lean Management
Metrology
1. Basic Metrology/Measurement
2. Measurement Techniques
3. Calibration
4. Uncertainty Analyses
5. Gauge R&R
6. Laboratory Management
6
Development of New Courses/Program
New Courses
1996/97 Metrology PPTI, USM
1996/97 Semiconductor Devices PPTI, USM
1998/99 Electric & Electronic circuits PPTI, USM
2001/2002 Quality & Reliability (only the Quality portion) PPKM, USM
2001/2002 Ergonomics & Industrial Safety PPKM, USM
(only Ergonomics portion)
2001/2001 Manufacturing/Operations Management PPKM, USM
2002/2003 Engineering Management II PPKM, USM
2008 Introduction to Quality UniKL MITEC
New Programs
1998-1999 - Bachelor of Engineering (Hons) in Mechatronics USM
2007-2008 - Bachelor of Engineering Technology (Hons) UniKL
in Quality Engineering
- Diploma Engineering Technology in Quality Engineering
2011 - Bachelor of Engineering Technology (Hons) UniKL
in Process Instrumentation & Control Engineering
- Bachelor of Engineering Technology (Hons) UniKL
in Plant Maintenance
7
Supervision
Name & Thesis/Project Title Level of Study Year
1. Mohamad Ikbar Abdul Wahab – Development of Intelligent Decision Support System for Selection of Process Improvement
PhD Main Supervisor 2016
2. Rahmat Roslan Awang - Critical Success Factors For Lean Agile Healthcare Deployment At Ministry Of Health’s Hospitals
PhD Main Supervisor 2016
3. Azrul Hisyam Abdul Rahman – UniKL CARE as a Branding and Marketing Tool
PhD Main Supervisor 2016
4. Mohd Amran Daril – Artificial Neural Network in Decision Making for Quality Tool Selection
PhD Main Supervisor 2012
5. Fairul Anwar Abu Bakar – Critical Success Factor and Multi-criteria AHP decision making for SME
PhD Main Supervisor 2012
6. Zalinda Othman - Integrated Approach in production Scheduling using Genetic Algorithm
PhD Main Supervisor 2003
Name & Thesis/Project Title Level of Study Year
1. Quek Siow San - Artificial Neural Network Applications in Pharmaceutical Product Development
MSc Co-supervisor
2001
2. Suresh a/l Gobee - Improved FMEA Risk Ranking Method by Integrating Fuzzy Logic
MSc Main Supervisor 2002
3. Goh Wei Yee - Time Series Prediction using Recurrent Neural Networks and Boosting : An Experimental Study in Pharmaceutical Product Formulation
MSc Co-supervisor 2002
4. Lee Chung Yeow - Quality Management System (QMS) Implementation in Malaysian Industry - Penang"
MSc Main supervisor
2002
5. Salina Budin - Guidelines to Uncertainty Calculations.
MSc Main supervisor
2003
6. Koay Leeng Sze - A Self Assessment Guideline for Evalauting Quality Activities/Systems in an Organization.
MSc Main supervisor
2003
8
Name & Thesis/Project Title Level of Study Year
7. Sahala Siallagan, Implementation of TQM in Medan manufacturing Industries
MSc Main supervisor
2004
8. Amjad M. R. Khalili, An Empirical Investigation of the Critical Factors for ISO 9000, TQM Two Dimensions and Manufacturing Performance
MSc Main Supervisor 2004
9. Kauthar A. Rhaffor Pembangunan Budaya Keselamatan Menyeluruh (Total Safety Culture - TSC) di Industri Malaysia
MSc Main Supervisor
2005
10. Elmy Marina Mohd Khamis Developing Guidelines and Preventive Accidents Program for Computer and Visual Display Terminals (VDT) for Malaysian Industries
MSc Main Supervisor
2005
11. Nurul Shahida Mohd Shalahim Developing a Framework of Facilities Design towards World Class Manufacturing
MSc Main Supervisor
2005
12. Fawad Ahmed Comparative Study Between Mixed Model Assembly Line And Flexible Assembly Line Based On Cost Minimization Approach
MSc Co-Supervisor
2008
13. Nor Haniza Binti Bakhtiar Jemily Kajian Penilaian Risiko Terhadap Keselamatan Pekerja Pemprosesan Buah Kelapa Sawit
MSc Co-supervisor
2008
14. Kamal Bahrin Ismail (1995) Kesan Proses Pemesinan Logam (Mesin Pengisar Hujung) terhadap sifat Permukaan Bahan yang Dimesin
BTech Main Supervisor 1995
15. Norliza Osman (1996) Membangunkan dan Melaksanakan Pengurusan Kualiti Menyeluruh di Southern Pipe Industry (M) Sdn. Bhd.: Kajian Awal Mengenai Konsep Pelanggan dan Pembekal Dalaman.
BTech Main Supervisor 1996
16. Mohd Rizal @ Nasuha Yaakub (1996) Sistem Pengukuran Gear Berkomputer - Hardware
BTech Main Supervisor 1996
17. Mohd Nazri Yousoff (1996) Sistem Pengukuran Gear Berkomputer – Software
BTech Main Supervisor 1996
9
Name & Thesis/Project Title Level of Study Year
18. Suriatul Amin Yahya (1997) Kualiti Re-Engineering di dalam Proses Pembuatan untuk Pembangunan Sesebuah Produk.
BTech Main Supervisor 1997
19. Tuan Muhd Indera Putera Tuan Abd Razak (1998) Model Perlaksanaan Re-Engineering di Meranti System and Services Sdn. Bhd., Bukit Minyak, Pulau Pinang.
BTech Main Supervisor 1998
20. Ong Lee Choo (1998) Kalibrasi Robot Scara : Analisis Penempatan Robot
BTech Main Supervisor 1998
21. Yong Mee Lee (1998) Kalibrasi Robot Scara : Pengukuran dan Pampasan Penempatan Robot
BTech Main Supervisor 1998
22. Ch'ng Geik Ling (1998) Pembangunan Sistem Kalibrasi dan Analisis bagi Peralatan Pengukuran.
BTech Main Supervisor 1998
23. Tan Ee Min (1998). Pembangunan Sistem Kalibrasi dab Analisis bagi Peralatan Pengukuran : Suatu Kajian Kes.
BTech Main Supervisor 1998
24. Roy Maxwell (1998). Pengoptimaan Parameter Algoritma Genetik menggunkan Kaedah Taguchi dan Rekabentuk Faktorial.
BTech Main Supervisor 1998
25. Ismail Hashim (1999). Autokalibrasi Robot.
BTech Main Supervisor 1999
26. Mohd Azlan Jaafar (1999). Pengenalan Sistem Autokalibrasi kepada Robot Koordinat Cartesian.
BTEch Main Supervisor 1999
27. Zaidi Amin Zainol (1999) Pembangunan Pakej Latihan FMEA.
BTech Main Supervisor 1999
28. Marajuddin Moleng (1999). Kajian Kes FMEI di Cirrus Sdn. Bhd.
BTech Main Supervisor 1999
29. Thow Soon Seng (1999) Model Pengukuran Prestasi : Pembinaan, Penggunaan dan Analisis : Kajian Kes
BTech Main Supervisor 1999
30. Ching Hok Lai (1999). Model Pengukuran Prestasi : Pembinaan, Penggunaan dan Analisis : Kajian Kes
BTEch Main Supervisor 1999
10
Name & Thesis/Project Title Level of Study Year
31. Helmi Mohd. Isa (1999) Pembangunan Pakej Latihan Kalibrasi dan Pengoptimaan Proses Kalibrasi dalam Bidang Elektrik dan Tekanan
BTech Main Supervisor 1999
32. Lim Kian Chuan (1999) Pembangunan Pakej Latihan Kalibrasi dan Pengoptimaan Proses Kalibrasi dalam Bidang Elektrik dan Tekanan.
BTech Main Supervisor 1999
33. Ooi Siang Kueen (1999) Pengoptimaan Proses dan Pembagunan Pakej Kalibrasi Dimensi
BTech Main Supervisor 1999
34. Azizah Mohd. Yusop. (1999). Pengoptimaan Proses dan Pembagunan Pakej Kalibrasi Dimensi.
BTEch Main Supervisor 1999
35. Suriyati (1999). Pengoptimaan Proses dan Pembangunan Pakej Kalibrasi Suhu.
BTech Main Supervisor 1999
36. Junaidah Sapuan (1999). Pembangunan awal ISO 9000 di Bahagian Spinning, Binamold Sdn. Bhd.
BTech Main Supervisor 1999
37. Aslindawati Abdullah (1999). Pembagunan Awal ISO 9000 di Bahagian Turning, Binamold Sdn. Bhd
BTech Main Spervisor 1999
38. Mohd. Mazid Mansor (2000). Pembangunan Makmal Kalibrasi
BTech Main Spervisor 2000
39. Aesrol Azizi (2000). Pembangunan Sistem Kalibrasi.
BTech Main Spervisor 2000
40. Julizana Mat Rasid (2000). Pembangunan Sistem Knowledge-Based untuk Penambahbaikan Kualiti.
BTech Main Spervisor 2000
41. Hanipah Hakim (2000) Proses Pengoptimuman Dalam Sistem Bioproses.
BTech Main Spervisor 2000
42. Hammidi Ayong (2000). Kajian Tentang Keberkesanan Perlaksanaan FMEA dalam Industri Pembuatan di Malaysia.
BTech Main Spervisor 2000
43. Che Wan Mohd Hairi Che Wan Chik (2001) Kajian Sistem Pengaliran Transdermal Iotophoresis Berorientasikan Pambangunan Litar Elektrik Arus Dedenyut - Rekabentuk Ujikaji
BTech Main Spervisor 2001
11
Name & Thesis/Project Title Level of Study Year
44. Mohd. Nazmy Zainal Abidin (2001) Kajian Sistem Pengaliran Transdermal Iotophoresis Berorientasikan Pambangunan Litar Elektrik Arus Dedenyut - Pembangunan Litar
BTech Main Spervisor 2001
45. Koay Meng Chin (2001) Penggunaan Rangkaian Neural kepada Masalah Klasifikasi dan Ramalan.
BTech Main Spervisor 2001
46. Tan Pei Yong (2001). Pembangunan Borang FMEA untuk Penambahbaikan Proses Pengeluaran.
BTech Main Spervisor 2001
47. Bunai Muling (2001) Penilaian Praktik Benchmarking dalam Industri Tempatan.
BTech Main Spervisor 2001
48. Rohaiza Muslimun (2002). Sistem Pakar (expert system) dalam aplikasi FMEA (Failure Mode and Effect Analysis) bagi penambahbaikan kualiti
BTech Main Spervisor 2002
49. Norhaliza Darani (2002). Sistem Pakar (expert system) dalam aplikasi SPC (Statistical Process Control) bagi penambahbaikan kualiti.
BTech Main Spervisor 2002
50. Ruzie Yanti Ahmad Khudri (2002). Teknik Penambahbaikan Kualiti menggunakan SPC dan Gage R&R : Kajian Kes di BCM Sdn. Bhd.
BTech Main Spervisor 2002
51. Nor Aidawati Othman (2002). Teknik Penambahbaikan Kualiti menggunakan QFD (Quality Function Deployment) dan FMEA : Kajian Kes di BCM Sdn. Bhd.
BTech Main Spervisor 2002
52. Nor Amalina Abdullah (2002). Kajian Kes TPM (Total Productive Maintenance) di Industri Perkhidmatan.
BTech Main Spervisor 2002
53. NorRazfizah Abd. Razak (2002). Pembangunan Kriteria Kadaran Pembekal melalui kaedah Sistem Pengurusan Rantaian Bekalan (Supply Chain Management System).
BTech Main Spervisor 2002
54. Mohd. Azlan Saadin (2002). Kajian Perlaksanaan Kriteria Kadaran Sofwer.
BTech Main Spervisor 2002
55. Mohd. Khairul Kamarudeen (2002). Pembangunan Kriteria Kadaran Sofwer.
BTech Main Spervisor 2002
12
Name & Thesis/Project Title Level of Study Year
56. Ahmad Ridzuan Madian (2002) Pembagunan Template Kos Kualiti
BTech Main Spervisor 2002
57. Abd. Karim Daud (2002) Kajian Keberkesanan ISO 9000 di Industri di Malaysia.
BTech Main Spervisor 2002
58. Tan See Keat (2002). Pembangunan Program Kualiti
BEng Main Spervisor 2002
59. Lukman Wan Mat Daud (2002). Pendekatan QFD di dalam Kaedah Rekabentuk Kejuruteraan bagi Menambahbaik Keselamatan dan Kesihatan Pekerjaan di Industri Pembuatan Tayar.
BEng Main Spervisor 2002
60. Ismail Ainuddin (2002). Kajian mengenai perlaksanaan dan implikasi ke atas Pendedahan Pekerja kepada Bahan Kimia Merbahaya di Industri Kecil dan Sederhana.
BEng Main Spervisor 2002
61. Mokhriz Ajis (2003). Kajian Pelaksanaan Kaedah 6-Sigma di Ford (M) Sdn. Bhd.
BTech Main Spervisor 2003
62. Shaliza Azreen Mustafa (2003) Penggunaan Pelan Pensampelan dan Penentuan Saiz Sampel Pelan Pensampelan di IDT.
BTech Main Spervisor 2003
63. Mazwan Noor (2003) Kajian Peralihan ISO 1994 kepada ISO 2000
BTech Main Spervisor 2003
64. Norul Zuraimah Mas Hana (2003) Kajian Penilain Risiko dan Keselamatan di Industri : Kajian Kes.
BTech Main Spervisor 2003
65. Nurul Shahidah Mohd Shalahim (2003) Latihan Kesedaran dan Latihan Keselamatan di Kalangan Pekerja Industri.
BTech Main Spervisor 2003
13
Name & Thesis/Project Title Level of Study Year
66. Elsa Joy (2004) CBL package of 7 QC Tools BEng Main Spervisor 2004
67. Mohd Nur Afendy Md Yusoff (2004) Designing an Automated Guided Vehicle in a Kanban Production System.
BEng Main Spervisor 2004
68. Mohd Fauzi Masadi (2004) Design and Fabrication of a manual remote control robot for disposal of toxic waste in chemical plants
BEng Main Spervisor 2004
69. Chan Tian Kooi (2005) Development of 6-sigma tutorial package.
BEng Main Spervisor 2005
70. Ng Poh Yin (2005) Development of 6-sigma Training package.
BEng Main Spervisor 2005
71. Eddy Kamaruddin (2005) Development of SPC Training Package
BEng Main Spervisor 2005
72. Muhamad Najwa Nizam Mohamed Critical Success Factors for Manufacturing Sustainability
BEng
Tech
Main Supervisor 2011
73. Intan Syafienas - Excellence model based framework in higher education
BEng
Tech
Main Supervisor 2012
74. Siti Khadijah Ghazali – Development of Kanban System in Kosiswa
BEng
Tech
Main Supervisor 2012
14
CONTRIBUTION TO THE UNIVERSITY
No Date Position Section /
Institute / University Level
i. Administrations
UNIKL
1. 2005 - 2007 Dean UniKL MSI University
2. 2007 - 2008 Project Director, UniKL Pasir Gudang University
3. 2008 - 2013 Dean/Head of Campus UniKL MITEC University
4 2011 - 2013 Chairman Technical Committee for UniKL MITEC Tender Implementation
University
5 2013 – present Deputy President Student Development & Campus Lifestyle
University
6 2014 - 2015 5S Champion University
USM
5. 2003 – 2005 Program Chairman (Practical & Laboratories), School of Mechanical Engineering, USM
School
6. 2004 – 2005 Editorial committee member - Engineering in Focus (Bulletin for Engineering Campus, Universiti Sains Malaysia)
Engineering
Campus, USM
7. 1999 – 2000 Acting Program Chairman, School of Industrial Technology (9 mths)
School
8. 1996 - 2000
Member of the Advisory and Counseling Panel, School of Industrial Technology
School
9. 1996 - 2000 Secretary and Committee Member of the Unit Exemption Committee, School of Industrial Technology
School
10 1998 Chairman for A Special Research Committee to Investigate the Root Cause of Students' Failures for the School of Industrial Technology.
School
15
ii. Academic
UNIKL
1. 2007 - 2008 Technical Expert Committee Member for Program Development DET and BET Quality Engineering
Institute/University
2. 2007 - 2008 Coordinator for Technical Expert Committee for Program Development Diploma and Bachelor in Industrial Logistics
Institute/University
3. 2008 - 2010 Editorial Committee of UniKL Research Journal University
USM
4. 2000 Secretary Organizing Committee for Regional Symposium on Quality and Automation 2000, 4 May 2000, Penang. (International Conference)
University/Internati
onal
5. 1998 - 1999 Committee member for program development of Bachelor Engineering in Mechatronics.
University (USM)
RESEARCH AND PUBLICATION (i) RESEARCH ACTIVITIES
No Name of Research/
Consultation
Principal Researcher/Co-Researcher
Sponsor / Funding Project
Date
Organisation RM
1 Development and Application of an Electronic Device for Drug Delivery : A Feasibility Study
Principal
researcher
STRG 19,000.00 1999 - 2001
2 Development of an Intelligent System for On-Line Process Monitoring and Fault Diagnosis,
Co-researcher Long Term IRPA Project No. : 04-02-05-0010
200,000.00 2000 - 2002
3 Computerized Maintenance Management System for Palm Oil Manufacturing Industries
Co-researcher Yayasan
FELDA
84,000.00 2005 - 2006
16
No Name of Research/
Consultation
Principal Researcher/Co-Researcher
Sponsor / Funding Project
Date
Organisation RM
4 The Development Of Manufacturing Sustainability Framework For Malaysian Industries Utilizing A Macro-Supply Chain (Mcsc) Approach
Principal
researcher
FRGS, MOHE 23,000 2010 - 2012
5 Development of Manufacturing Sustainability Framework for Electrical and Electronics Industries in Malaysia: Integrated Critical Success Factor
Principal
researcher
STRG 19,000 2010 - 2012
(ii) PUBLICATIONS
No Publication Title Name of Publisher/Organiser
Date of Publication
1 Research report K.J. Stout, P. J. Sullivan, W. P. Dong, E. Mainsah, K. Subari. (1991) The Development of an Integrated Approach to 3-D Surface Finish Assessment. Interim Report No. 1. EC Contract No. 3374/1/0/170/90/
EC Contract No. 3374/1/0/170/90/2
1991
2 Kamaruddin, Shahrul, Mokhtar, Mohzani, Subari, Khairanum and Othman, Zalinda (2007) Scheduling With Alternatives Machine Using Fuzzy Inference System And Genetic Algorithm.
Project Report. Universiti Sains Malaysia
2007
3 Chapter in Book Applications and Science in Soft Computing in Advances in Soft Computing Series, Springer-Verlag 2003
Springer-Verlag
2003
17
No Publication Title Name of Publisher/Organiser
Date of Publication
4. International Journal Fairul Anwar Abu Bakar, Khairanum Subari, Amran Daril (2015), Critical Success Factors of Lean Six Sigma Deployment : A Current Review
International Journal of Lean Six Sigma (IJLSS)
2015
5 Amjad Al Khalili and Khairanum Subari (2013), The Interrelationship between ISO 9000 and Total Quality Management : An Empirical Investigation with a Focus on Soft and hard TQM Dimensions
International Journal of Services and Operations Management (IJSOM)
2013
6 Amjad Al Khalili and Khairanum Subari (2013), Understanding the Importance of TQM Dimensions: Critical Review of Soft and Hard TQM Aspects
International Journal of Services and Operations Management (IJSOM)
2013
7 Amjad Al Khalili and Khairanum Subari (2013), Understanding the linkage between soft and hard Total Quality Management: Evidence from Malaysian Manufacturing Industries
Jordan Journal for Mechanical and Industrial Engineering
2013
8 Sulaiman, O., Hashim, R., Subari, K and Liang, C. K. (2008), Effect of sanding on surface roughness of rubberwood
Journal of Materials Processing Technology
2008
9 W.Y. Goh, C.P. Lim, K.K. Peh, and K. Subari (2002), “Application of a Recurrent Neural Network to Prediction of Drug Dissolution Profiles”,
Neural Computing and Applications, vo1 10(4), pp. 311-317
2002
10 Zalinda Othman, Khairanum Subari, and Norhashimah Morad (2002) "Application Of Fuzzy Inference Systems And Genetic Algorithms In Integrated Process Planning And Scheduling."
International Journal of the Computer, the Internet and Management. Vol. 10 No. 2 (May - August, 2002).
2002
11 W.Y. Goh, C.P. Lim, K.K. Peh, and K. Subari (2001), “A Recurrent Neural Network Approach to the Prediction of Drug Dissolution Profiles”
International Journal of Knowledge-based Intelligent Engineering Systems, vol 5(2), pp.69-75
2001
18
12. J. Simào, D.K. Apinwall, M.L.H. Wise, K. Subari (1996), “Surface texture transfer in simulated tandem and temper mill rolling using electrical discharge textured rolls”
Journal of Materials Processing Technology, Volume 56, Issues 1–4, January 1996, Pages 177-189
1996
No Publication Title Name of Publisher/Organiser
Date of Publication
12 National Journal Zalinda Othman, Khairanum Subari and Norhashimah Morad, ‘Job Shop Scheduling with Alternative Machines using Genetic Algorithms’,
Jurnal Teknologi D, Bil 41, Disember 2004
2004
CONFERENCE
No Name of Conference Conference Paper Title Date of Conference
1 International Conference Khairanum Subari, Ruzainah Ali, Zalizah Awang Long Creating World Class University: UniKL Insight Towards Alignment to National Strategies
12th QS Asia-Pacific Professional Leaders in Education (QS-APPLE) Conference, PICC, Putrajaya
2016
2 Khairanum Subari, Ruzainah Ali, Kamaruzzaman Ismail Student Success and Employability: The Insight of UniKL Experience
6th QS Maple, Al Ain, Dubai 2016
3 Khairanum Subari An Integrated Value-based Learning and Teaching Model
2014 International Educational Conference (IETC2014), Chicago, USA
2014
4 Khairanum Subari and Koay Leeng Sze (2008) A Methodology For Developing A Self-Assessment Tool To Measure Quality Performance In Organizations (A Malaysian Perspective)
13th International Conference on ISO 9000 & TQM (13-ICIT) 24 – 26 March 2008 Kula Lumpur
2008
5 Shaliza Azreen Mustafa, Shahrul Kamaruddin, Mohzani Mokhtar, Zalinda Othman and Khairanum Subari (2006), Application of Quality Function Deployment in identifying ergonomics programs for Malaysia manufacturing industries
International Conference on Technology Management, ICTM 2006, Kuala Lumpur
2006
19
No Name of Conference Conference Paper Title Date of Conference
6 Mazwan Noor, Khairanum Subari and Zalinda Othman (2004), Adopting lean principles in planning: A case study
Second International Industrial Engineering Conference, IIEC-2004, Riyadh, Saudi Arabia, November 2004 (proceeding)
2004
7 Shaliza Azreen Mustafa, Khairanum Subari & Zalinda Othman, Framework of proper usage of computers and visual display terminals for Malaysian industries
Second International Industrial Engineering Conference, IIEC-2004, Riyadh, Saudi Arabia, November 2004 (proceeding)
2004
8 Muhammad Suzuri, Suresh Gobi and Khairanum Subari (2002), "A New Ranking Method For Fuzzy FMEA".
4th International Conference on Recent Advances in Soft Computing, Nottingham, UK. 12-13 December 2002
2002
9 Z.A. Aziz, C.P. Lim, and K. Subari (2002), “Industrial Application of Performance Quality Techniques. Part 1 : A Guideline for Planning Industrial Experiments”
Conference on Quality, Kuwait, 10-13 March, 2002
2002
10 C.P. Lim, S.S. Quek, K. Subari, K.K. Peh, and Z.A. Aziz (2002), “Industrial Application of Performance Quality Techniques Part II: A Case Study in Pharmaceutical Industry”
Conference on Quality, Kuwait, 10-13 March, 2002.
2002
11 Khairanum Subari, Koay Leeng Sze and Wan Mansur Wan Muhammad (2002), "Development of Performance Measurement Model to Evaluate Quality Activities/Systems in Organizations : Part I : Model Development".
Conference on Quality, Kuwait, March 10-13, 2002
2002
12 Khairanum Subari, Koay Leeng Sze and Wan Mansur Wan Muhammad (2002), "Development of Performance Measurement Model to Evaluate Quality Activities/Systems in Organizations : Part II : Results and Analysis",.
Conference on Quality, Kuwait, March 10-13, 2002
2002
20
No Name of Conference Conference Paper Title Date of Conference
13 Wan Mansur Wan Muhamad, Khairanum Subari and Lokman Mohd. Fadzil (2002), "A Strategy Towards Global Competitiveness : Internet-Based Quality Assessment",.
Conference on Quality, Kuwait, March 10-13, 2002
2002
14 Zalinda Othman, Khairanum Subari & Norhashimah Morad (2001), Optimization of process planning and scheduling using genetic algorithms
First International Conference on Mechatronics, Kuala Lumpur, Malaysia. 2, pp.562-570. 2001 (proceeding)
2001
15 S.S. Quek, C.P. Lim, K.K. Peh, and K. Subari, (2001) “Application of an Intelligent System to Pharmaceutical Product Development”
Proceedings of the 1st International Conference on Mechatronics, vol II, pp. 524-530.
2001
16 C. P. Lim, Khairanum Subari and Feng Lim Wong. (2001) Development and Application of a Knowledge-based FMEA System for Manufacturing Industries..
First International Conference on Mechatronics ICOM'01, 12-13 February 2001, Kuala Lumpur
2001
17 Siow San Quek, C.P. Lim, Kok Khiang Peh, and Khairanum Subari. (2001) Application of an Intelligent System to Pharmaceutical Product Development.
First International Conference on Mechatronics ICOM'01, 12-13 February 2001, Kuala Lumpur.
2001
18 Zalinda Othman, Khairanum Subari, and Norhashimah Morad (2001). Optimization of Process Planning and Scheduling using Genetic Algorithm
First International Conference on Mechatronics ICOM'01, 12-13 February 2001, Kuala Lumpur.
2001
19 Suresh Gobee, Khairanum Subari, and Mohammad Suzuri Hitam. (2001) FMEA risk ranking using a combination of Quantitative and Qualitative Ranking Information.
First International Conference on Mechatronics ICOM'01, 12-13 February 2001, Kuala Lumpur
2001
20 S.S. Quek, C.P. Lim, K.K. Peh, and K. Subari, (2000) “Application of Artificial Neural Networks to Pharmaceutical Product Development”,
The 5th Online World Conference on Soft Computing in Industrial Applications. (WSC5) . Paper #09
2000
21
No Name of Conference Conference Paper Title Date of Conference
21 W.Y. Goh, C.P. Lim, K.K. Peh, and K. Subari, (2000) “A Neural-network-based Intelligent System for Time-series Prediction Problems in Product Development”,
IEEE International Conference on Intelligent Systems and Technologies for the Next Millenium (TENCON2000), vol. I, pp. 151-155.
2000
22 Suresh Gobee, Khairanum Subari and Muhammad Suzuri Hitam (2000).
Comparing Traditional Fmea Risk Priority Number Ranking with Fuzzy FMEA Risk Ranking: A Case Study in Condenser System.
The International Conference on Intelligent Technologies (InTech'2000), Bangkok, Thailand, Dec. 13-15, 2000, pp.299-307.
2000
23 S. Gobee, K. Subari, M. S. Hitam. (2000) Improved FMEA Risk ranking Method using Fuzzy Logic.
Regional Symposium on Quality and Automation 2000, 4 May 2000, Penang.
2000
24 J. Simao, D. K. Aspinwall, M. L. Wise, K. Subari. (1993) Surface Texture Transfer in Simulated Tandem and Temper Mill Rolling Using Electrical Discharge Textured Rolls.
International Conference On Advanced Materials and Processing Technologies. 24-27 August 1993
1993
1 National Conferences: Shaliza Azreen Mustafa, Khairanum Subari, Zalinda Othman, Shahrul Kamaruddin & Mohzani Mokhtar (2005), Development of a framework in enhancing ergonomics practices for computer user in Malaysian industries,
Conference on Computer Integrated System, ATCI 2005, Kuala Lumpur
2005
2 Amjad M. R. Khalili, Khairanum Subari, Shahrul Kamaruddin (2004) An Empirical Investigation of the Critical Factors for ISO 9000, TQM Two Dimensions and the Overall Manufacturing Performance
NAPCOL 2004 2004
3 W.Y. Goh, C.P. Lim, K.K. Peh, and K. Subari, (2000) “Prediction of In-vitro Drug Dissolution Profiles using a Recurrent Neural Network”,
The 15th Scientific Meeting of the Malaysian Society of Pharmacology and Physiology.
2000
22
No Name of Conference Conference Paper Title Date of Conference
4 S.S. Quek, C.P. Lim, K.K. Peh, and K. Subari, (2000) “Confidence Interval Estimation of Artificial Neural Network Performance using Bootstrap Method-A Case Study in Pharmaceutical Product Development”,
The 15th Scientific Meeting of the Malaysian Society of Pharmacology and Physiology.
2000
5 Zalinda Othman, Khairanum Subari and Norhashimah Morad. (2000) Application of Fuzzy Inference Systems and Genetic Algorithms in the Optimization of Process Planning and Scheduling .
National Conference on Management Science/Operations Research, November 2000, Penang
2000
1 Technical report, bulletin, colloquium, seminar etc Noor Ain Ibrahim, Zalinda Othman and Khairanum Subari (2005) A Preliminary Study On Layout Design Based On Make To Order Environment
Proceedings of the 4th Mechanical Engineering Research Colloquium (MERC 2005/1) School of Mechanical Engineering, USM, Penang, Malaysia, 27-29 January 2005
2005
2 A Comparative Study Of Flexible Assembly Line And Mixed Model Assembly Line, Fawad Ahmed, Zalinda Othman, Khairanum Subari, Arif Suhail,
Proceedings '''of the 4th Mechanical Engineering Research Colloquium (MERC 2005/1) School of Mechanical Engineering, USM, Penang, Malaysia, 27-29 January 2005
2005
3 Elmy Marina Mohamad Khamis, Khairanum Subari & Zalinda Othman, A preliminary study of ergonomics and quality function deployment awareness in Malaysian industries
Proceedings '''of the 4th Mechanical Engineering Research Colloquium (MERC 2005/1) School of Mechanical Engineering, USM, Penang, Malaysia, 27-29 January 2005
2005
4 Noor Ain Ibrahim, Zalinda Othman & Khairanum Subari, A preliminary study on layout design based on make-to-order environment. In proceeding of the research colloquium, School of Mechanical Engineering, USM, January 2005
Proceedings '''of the 4th Mechanical Engineering Research Colloquium (MERC 2005/1) School of Mechanical Engineering, USM, Penang, Malaysia, 27-29 January 2005
2005
23
No Publication Title Name of Publisher/Organiser Date of Publication
5 Shaliza Azreen Mustafa, Khairanum Subari & Zalinda Othman,The awareness of ergonomics in Malaysian manufacturing industries, In proceeding of the research colloquium, School of Mechanical Engineering, January 2005
Proceedings '''of the 4th Mechanical Engineering Research Colloquium (MERC 2005/1) School of Mechanical Engineering, USM, Penang, Malaysia, 27-29 January 2005
2005
CONSULTANCY / ENTREPRENEURSHIP
No Name of Consultation / Entrepreneurship
Joint Member
Sponsor/ Funding Project Date
Organisation RM Begin Complete
1. Technical assessor panel IGS R&D grant entitiled "GSM Car Alert System (Car Safe version 1)"
Technical
Panel
MOSTI Honororium 2004 2004
2. 2 days course in Metrology and Calibration - In-house trainning for Perwaja (1 day at Perwaja, Gurun and 1 day laboratory work in USM)
Trainer PERWAJA Honororium
3. Sharp-Roxy, Sungai Petani, Kedah i. 7 QC Tools ii. Introduction to
TQM
Trainer Sharp-Roxy Honororium May
2003
Nov 2003
4. B. Braun, Penang, World Class Thinking, Building a World Class Organization
Trainer B. Braun Honororium 18 July
2003
5. Introduction to Kaizen. Soritsu Technology (M) Sdn. Bhd. Perai
Trainer Soritsu Technology (M) Sdn. Bhd. Perai
Honororium 30 July 2003
6. Certificate for Quality Technician
Co-organizer and Trainer
PPTI, USM Honororium 2001 2006
24
ACADEMIC LEADERSHIP AND ESTEEM
Dates Accomplishment / Achievement Level
(International/National or PhD/Master)
(a) Academic Accolade or Award
1999 CICHE Visitor (Project 730F: Instrumentation & Automation) to University of Lancaster,.
International
1995-1996 Asian Development Bank Research Award - University of Sheffield
International
(b) Appraiser / Examiner
2000 Internal Examiner for Tham Yuen Fong - Kajian Aktiviti Kualiti antara Pembekal dan Pelanggan, USM
MSc.
2001 Internal Examiner for Yii Hee Kim - Pembangunan Rangka Hidbrid Berasaskan Neuro-Genetik untuk Proses Percetakan Perekat Pateri. USM
MSc.
2002 Internal Examiner for Kifayah Amar - Kajian Pelaksanaan Kualiti dalam Organisasi-organisasi Pengeluaran di Indonesia. USM
MSc
2002 Internal Examiner for Kuan Mei Ming - Development of Neural Network-Based Intelligent Systems for Medical Pattern Classification with Missing Features. USM
MSc
2002 Internal Examiner for Amar Singh - Measuring Cost Of Quality : A case study. USM
MSc
2003 External Examiner for Zaini Abdullah - A Total Quality Management Driven Performance Management System : Multi-Source Assessment and the issue of Fairness. UUM.
PhD
2003
Internal Examiner for Jeevan Kanesan - Optimization of Component Placement on PCB using Genetic Algorithm. USM
MSc
2005 External Examiner for Hilma Raimona Zadry - The Integration of TQM and Theory of Constraints Implementation in Malaysian Automotive Suppliers. UTM.
MSC
2009 External Examiner for Che Padzilah bt Yaacob – A Study of Quality Tools and techniques Employed in Perlis and Kedah Manufacturing Companies. UniMAP.
MSc
2009 External Examiner for Elita Amrina – Manufacturing Performance Measurement Tool for Small and Medium-Sized Enterprises. UTM.
MSc
25
Dates Accomplishment / Achievement Level
(International/National or PhD/Master)
2010 The 11th Asia Pacific Industrial Engineering & Management Systems (APIEMS 2010) Conference
International - Technical Reviewer
(c) Visiting Professor / Fellowship
1999 "Computaional Intelligence Research Group (CIRG) activities at Universiti Sains Malaysia", Graduate Seminar, University of Lancaster
International
1999 "Calculation of Measurement Uncertainties", 3rd Year Engineering, Department of Engineering, University of Lancaster
International
(d) Academic Journal Article Appraiser / Technical / Scientific Appraisal Committee
1998 Journal of Industrial Technology, SIRIM. Measurement of Surface Profile of a Computer Hard Disk Using Optical Flat.
National
2003 Jurnal Teknologi, UTM. Pembentukan Sistem Pembangunan Proses : Ke Arah Pengilangan Bertaraf Dunia
National
2015 Jordan Journal Of Mechanical And Industrial Engineering - Factors Affecting the Competitiveness of the Food Industry by Using Michael Porter's Five Forces Model Case Study in Hamadan Province, Iran.
International - Technical Reviewer
2015 International Journal of Services and Operations Management (IJSOM) - Understanding Contemporary Models for Organizational Sustainability: Critical Review
International - Technical Reviewer
2016 International Journal of Services and Operations Management (IJSOM) - Quality Management System and Sustainability: A Malaysian Perspective
International - Technical Reviewer
2017 International Journal of Industrial and Systems Engineering (IJISE) - Quality Management Practices and Sustainable Performance: Examining the Role of Soft TQM as Mediator
International - Technical Reviewer
26
PROJECTS STUDENT DEVELOPMENT & CAMPUS LIFESTYLE
1. UniKL CARE – Banjir di Kuantan & Johor
2. UniKL CARE – Project MESRA SISWA Ketereh
3. UniKL CARE – Project Selatan Thailand
4. UniKL CARE International – Acheh, Kemboja, Vietnam
5. Student Leadership Discourse
i. Tan Sri Datuk Seri Panglima Anuar Musa – 3rd March 2014
ii. Tan Sri Arshad Ayub – 9th April 2014
iii. Prof Dr Teo Kok Seong – 14th May 2014
iv. Tun Dr Mahathir bin Mohamad – 5th November 2014
6. Global Village 2014 – organized by SDCL UniKL, sponsored by MARA,
participations from UniKL. MRSM and IPMA
7. UniKL Enactus – semi finals
MOTIVATIONAL TALK/SERVICES
Speaker :
1. "Techniques in Creative Problem Solving." School of Industrial Technology,
1997-1999.
2. "Data Analysis in Experimentation." School of Industrial Technology, 1998.
3. "Pelajar Cemerlang, Ibubapa Girang." Persatuan Kakitangan Pusat
Pengajian Teknologi Industri, 1998.
4. "Mencari Hati Karma…." Bengkel Perkongsian Bijak. Pusat Pengajian
Teknologi Industri, Universiti Sains Malaysia, 1999
5. "Peningkatan Diri Dalam Kerjaya." Maktab Perguruan Persekutuan Pulau
Pinang, 1999.
6. Sijil Juruteknik Kualiti, Pusat Pengajian Teknologi Industri, 1999
7. "In Search of the Perfect Q…" Komag Quality Fair 2000.
8. Sijil Juruteknik Kualiti 2, Pusat Pengajian Teknologi Industri, 2000
9. "Budaya Kerja Berkualiti" Maktab Perguruan Persekutuan Pulau Pinang.
27
10. "7 Management and Planning Tools" Personel Pentadbiran Universiti Sains
Malaysia, August 2000.
11. "7 New Quality Tools for TQM" Novotel, Penang October 2001
12. Sijil Juruteknik Kualiti 3, Iomega (M) Sdn. Bhd., 2001
13. Bengkel KMK, Intan Wilayah Tengah 25-28 March 2002
14. "Profesionalisma Di dalam Kerjaya", Hari Kesedaran Moral Peringkat Maktab
Perguruan Persekutuan Pulau Pinang, 17 April 2002
15. "7 Management and Planning Tools", Universiti Sains Malaysia, May 2002
16. Bengkel KMK, Universiti Sains Malaysia, 14-17 Januari 2003
17. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 25-26
February, 2003
18. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 11-12 March, 2003
19. Penceramah Kem Motivasi, Sek. Keb. Sungai Kechik, 29 March 2003
20. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 5-6 May, 2003
21. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 7-8 May
2003
22. Bengkel KMK, PERHEBAT, Kem Sungai Buloh, 19-22 May, 2003
23. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 16-17 June 2003
24. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 18-19 June,
2003
25. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 14-15 July, 2003
26. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 16-17 July,
2003
27. World Class Thinking, building a world class organization, B. Braun, Penang,
18 July 2003
28. Introduction to Kaizen. Soritsu Technology (M) Sdn. Bhd. Perai, 30 July
2003
29. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 4-5 August, 2003
30. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 6-7 August,
2003
28
31. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 2-3 September, 2003
32. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 4-5
September, 2003
33. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 8-9 October, 2003
34. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 14-15
October, 2003
35. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 10-11 November,
2003
36. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 13-14
November, 2003
37. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 6-7 January, 2004
38. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 8-9 January,
2004
39. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 12-13 February, 2004
40. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 19-20
February, 2004
41. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 4-5 March, 2004
42. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 18-19
March, 2004
43. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 20-21 April,
2004
44. Introduction to 7 QC Tools, Kobe Precision Technology, 17 May, 2004
45. Introduction to FMEA, Kobe Precision Technology, 19 May, 2004
46. Penerapan Budaya Kualiti, Vistana Hotel, 31 May, 2004 for School of
Chemical Engineering, Universiti Sains Malaysia.
47. Bengkel KMK untuk Fasilitator, 28 Februari – 1 Mac 2005 for School of
Mechanical Engineering, Universiti Sains Malaysia.
48. Menjana Sikap Positif , 16 April 2005, Sek Men Agama Diniah, Kupang,
Baling, Kedah
49. Striving for ‘A’ Workshop UniKL MITEC 2011
29
50. Invited Panel “Mengarusperdana Latihan Kemahiran’ Symposium Carnival
Skills Malaysia KEPAK 2011 23 June 2011 at Persada, Johor organized by
Jabatan Pembangunan Kemahiran Wilayah Selatan, Kementerian Sumber
Manusia
51. Invited Panel for Forum Mencari Pasangan Soleh/Solehah organized by
Jabatan Agama Islam, Johor 1 July 2011 at Kolej Matrikulasi Ledang, Johor
52. Teaching Style vs Learning Style Workshop UniKL MITEC 2012
53. Mentor Mentee Effective Habits Workshop UniKL MITEC 2012