personal protection products catalogue 2021
TRANSCRIPT
Personal Protection Products Catalogue 2021
To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA1 3
General Information on Single Use Isolation Gowns.The need for PPE should be based on the precautions required to protect against infectious agents based on the mode of transmission. Choice of fluid resistant or fluid impermeable will be made based on the risk and amount of fluid exposure anticipated during the patient or patient environment encounter.
What is the difference between AAMI Level 1, 2, 3 & 4 ?Table 1: Summary of AAMI Fluid resistance Classification. (Adapted from AAMI PB70:2012)
• AATCC 42-2017: Measures resistance of fabrics to the penetration of water by impact (AATCC, 2018)
• AATCC 127-2017: Measures resistance of fabric to the penetration of water under hydrostatic pressure (AATCC, 2017)
• ASTM F1670-17: Evaluate resistance of materials used in protective clothing to penetration by synthetic blood
under conditions
of continuous liquid contact (ASTM, 2017)
• ASTM F1671-13: Measure penetration by blood-borne pathogens using a surrogate microbe under conditions of continuous
liquid contact (ASTM, 2013)
Characteristics "AAMI level 1 Fluid Resistant"
"AAMI Level 2 Fluid Resistant"
"AAMI level 3 Fluid Resistant"
"AAMI Level 4 Fluid Impermeable"
Application
Minimum standard for isolation gowns for minimal amounts of spray or droplets.
Commonly used as an Isolation gown. Suitable for situations involving low amounts of fluid or sprays.
Used where more moderate levels of fluid exposure or sprays may be anticipated.
Used where large amounts of fluids or sprays may be anticipated or encountered.
Material Spunbond non-woven product.
Single Layer microfibres or a topically treated textile material.
Laminated or coated material (e.g. polypropylene coated polypropylene).
Laminated or coated material (e.g. impervious polyethylene.
Resistance to Fluid Penetration
Minimal water resistance.
Resistant to water spray and some resistance to water absorption on contact.
A higher standard of resistant to water spray and water absorption on contact than Level 2.
Resistant to the penetration of viruses based on penetration of a surrogate microbe.
Resistance to Fluid Penetration test
AATCC 42-2017: Test for spray resistance.
"AATCC 42-2017 AATCC 127 Test for water resistance > 20 cm hydrostatic pressuwre".
"AATCC 42-2017 AATCC 127 Test for water resistance > 50 cm hydrostatic pressure".
Meets requirements of bacteriophage penetration ASTM F1671.
Simba Isolation Gown Level 4 - 42gsm SPP+PEDisposable and lightweight protective isolation gown for medical use.
Structure & Performance.• 42gsm SPP+PE Laminate• Knitted Polyester Cuff• AAMI Level 4• TGA Registered • Tape sealed seam
Protection Levels & Certification.
Level
Certification
Group Name Description TGA Dispenser Qty Carton Qty
Gown CIG-ISOGOWN-NON LEVEL 4 BLUE DISPOSABLE ISOLATION GOWN 335176 100 100
Level 4 Isolation Gown
Single Use Isolation
Gown
To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA1 To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA14 5
Simba Isolation Gown Level 2 - 43gsm PP+PEDisposable and lightweight protective isolation gown for medical use.
Structure & Performance.• Polypropylene (PP) + Polyethylene (PE)• 42gsm• Tie back with four fabric ties• Ultrasonic Welded Seams• TGA registered• ARTG No: 335301
Protection Levels & Certification.
Level
Certification
Group Name Description TGA Dispenser Qty Carton Qty
Gown CIG-ISO-L2-PPPE LEVEL 2 BLUE DISPOSABLE ISOLATION GOWN 335301 100 100
Level 2 Disposable Isolation Gown
Single Use Isolation
Gown
Reusable Surgical Gowns.
Maxima Barrier Gown Protect patient & healthcare worker from micro organisms, body fluids and particulate matter.
Structure & Performance.• Ties on waist, neck & back • Knitted cuffs- Green• TGA Registered
Protection Levels & Certification.
Group Name Description TGA Dispenser Qty Carton Qty
Gown 4195043-OMNI REUSABLE GOWN OP MAXIMA - TIE 334340 30 30
Maxima Barrier Gown
To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA1 7
General Information on Surgical / Procedural Masks.The need for PPE should be based on the precautions required to protect against infectious agents based on the mode of transmission. In the majority of situations where standard respiratory protection is needed, a single use surgical mask (minimum level 2 barrier) is appropriate.
What is the difference between Barrier Level 1, 2 & 3 ?Table 1: Summary of Barrier Classification. (Adapted from Australian Standard AS 4381:2015)
Characteristics Level 1 Barrier Protection Level 2 Barrier Protection Level 3 Barrier Protection
Application
For general purpose medical procedures, where the wearer is not at risk of blood or body fluid splash. To protect staff and/or the patient from droplet exposure to microorganisms.
For use in emergency departments, dentistry or changing dressings on small wounds where minimal blood droplet exposure may occur.
For all surgical procedures, major trauma first aid or in any area where the healthcare worker is at risk of blood or body fluid splash.
Bacterial Filtration Efficiency (BFE) % ≥ 95 % ≥ 98 % ≥ 98 %
Differential Pressure. (mm H2O/cm2) < 4.0 < 5.0 < 5.0
Resistance to penetration by Synthetic blood. Minimum pressure in mmHg for pass.
80 mmHg 120 mmHg 160 mmHg
Note: These characteristics are based on an unworn mask. The characteristics may differ from expectations due to individual fit characteristics.
Considerations when using a surgical mask include:Masks should be changed between patients and when they become soiled or wet & never reapplied after they have been removed; masks should not be left dangling around the neck; touching the front of the mask while wearing it should be avoided; hand hygiene should be performed upon touching or discarding a used mask.
Test methods used for conformation: BFE: ASTM F2101-14 or EN 14683:2014.
Differential Pressure: EN 14683:2014 Resistance to Penetration by Synthetic blood: ASTM F1862 / F1862M-13
Simba Single Use N95 MaskBreathe easy and maintain a healthy respiratorysystem with this N95 face mask.
Structure & Performance.Fabric layers from outside to inside:• Outer Layers (1 and 5) Polypropylene • Inner Layers (2, 3 and 4) Charged Polypropylene
Five layers of protection – raised dome for comfort & performance.
Level
Certification
Single Use N95 Mask
Single Use Respirator
Group Name Description TGA Dispenser Qty Carton Qty
Mask CFM-DIS-N95 N95 DISPOSABLE FACE MASKS 342896 20 400
To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA1 To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA18 9
Everyday Mask
SpecificationsProduct :
Layers :
Color :
Attachment Design :
Percent of Bacterial Reduction (%)Staphylococcus Aureus : >99.96Escherichia Coli : >99.97
Everyday Mask
3 Layers
Black, White
Ear loop
Available color in stock
100% Polyester Fabric Outer Layer
Non-Woven Felt Polyester Mid Layer
Dust Filter
UV and Water Resistant
Antibacterial
Cool Surface
Sweat Absorbent
Washable and Re-usable
Note : Masks are not intended for medical use. User must follow good hygiene, social distancing and follow mask washing instructions.
Three layers of protection – pleated for
comfort & shape.
Reusable Black 3 Layer Nose Fit Mask
Structure & Performance.• 100% Polyester Fabric Outer Layer• Non-Woven Felt Polyester Mid Layer• Dust Filter• UV and Water Resistant • Antibacterial• Cool Surface• Sweat Absorbent• Washable and Re-usable
Reusable Black 3 Layer Nose Fit Mask
ReusableMask
Group Name Description TGA Dispenser Qty Carton Qty
Mask 16341 REUSABLE BLACK 3 LAYER NOSE FIT MASK N/A 500
Mask RUSE-BLKMASKSIM REUSABLE BLACK 3 LAYER NOSE FIT MASK (ADJUSTABLE) N/A 500
Three layers of protection – pleated for
comfort & shape.
Level
Certification
Simba Single Use Face Masks Level 2 - 70gsm SMSThe most affordable face mask used in the medical andessential service industry.
Structure & Performance.Fabric layers:• Outer layer: 20-25gsm blue Non-woven polypropylene fabric.• Middle layer 1: 20-25gsm melt blown polypropylene; bacterial filtration efficiency of 98%.• Inner layer: 20-25gsm white non-woven polypropylene fabric layer.• Two elastic Earloops or ties • TGA Registered
Single Use Face Masks Level 2
Single Use Mask
Group Name Description TGA Dispenser Qty Carton Qty
Mask CFM-DIS-L2TIE LEVEL 2 FACE MASKS WITH TIE BACK 3PLY 340020 50 2000
Mask CFM-DIS-L2LOOP LEVEL 2 FACE MASKS WITH EAR LOOPS 3PLY 340020 50 2000
To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA1 To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA110 11
Simba Single Use Face Masks Level 1 - 70gsm SMSThe most affordable face mask used in the medical andessential service industry.
Structure & Performance.Fabric layers:• Outer layer: 20-25gsm blue Non-woven polypropylene fabric• Middle layer: 20-25gsm melt blown polypropylene with bacterial filtration efficiency of 95%• Inner layer: 20-25gsm white non-woven polypropylene fabric layer • Two elastic Earloops• TGA registered• EN 14683 Type IIR• AS 4381:2015
Three layers of protection – pleated for comfort & shape.
Level
Certification
Single Use Face Masks Level 1
Single Use Mask
Group Name Description TGA Dispenser Qty Carton Qty
Mask CFM-DIS-3PLY LEVEL 1 DISPOSABLE FACE MASKS 340020 50 2000
Simba Anti Fog PET Face Shield
Structure & Performance.This face shield with protective screen allows you to take extra precautions for the wellbeing of medical staff, customer service and the general public.
• The Face Shield consists of 0.25 mm thick PET visor treated for anti-fog ; a foam covered headband and an elastic strap.• The Face Shield has CE and FDA certification• The Face Shield conforms to EN 1731, the European standard for personal eye and face protection, including high energy impact protection.• TGA Registered.• EN 1731:2006.
Protection Levels & Certification.
Disposable Face Shields
Single Use Mask
Group Name Description TGA Dispenser Qty Carton Qty
Mask CM-FS-SHIELD FACE SHIELD 33 X 22CM 333927 10 200
To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA1 To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA112 13
Simba Single Use Caps
Structure & Performance.• PP Non-woven • Tie back • 35gsm
Protection Levels & Certification.
Group Name Description TGA Dispenser Qty Carton Qty
Cap CDC-TIE-BLU DISPOSABLE CAP - TIE BACK - BLUE 340309 250 1000
Cap CDC-TIE-GRE DISPOSABLE CAP - TIE BACK - GREEN 340309 250 1000
Single Use Caps
Single Use Caps
Simba Single Use Bouffant
Structure & Performance.• PP Non-woven with PU elastic • 10gsm
Protection Levels & Certification.
Group Name Description TGA Dispenser Qty Carton Qty
Cap CBC-CAP-BLU20 BOUFFANT CAP WITH ELASTIC BLUE 20GSM 28CM DIA. 340309 100 1000
Cap CBC-CAP-GRE20 BOUFFANT CAP WITH ELASTIC GREEN 20GSM 28CM DIA. 340309 100 1000
Cap CBC-CAP-PIN20 BOUFFANT CAP WITH ELASTIC PINK 20GSM 28CM DIA. 340309 100 1000
Cap CBC-CAP-RED20 BOUFFANT CAP WITH ELASTIC RED 20GSM 28CM DIA 340309 100 1000
Cap CBC-CAP-WHI20 BOUFFANT CAP WITH ELASTIC WHITE 20GSM 28CM DIA 340309 100 1000
Single Use Bouffant Caps
Single Use Caps
To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA1 To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA114 15
Scarf , Tie-back – Single Use SCA-TIE-BLU ; SCA-TIE-PIN
Composition: 100% Polypropylene (PEP
35 gsm Size: 96cm X 96 cm Colour: Blue or Pink Fluid resistant TGA Registration: ARTG 340309 Made by a CE approved manufacturer of PPE
Image is representative only
Surgical Scarf Tie Back
Structure & Performance.• Compostion: 100% Polypropylene (PEP 35 cgm) • Size: 96cm x 96cm• Fluid Resistant• TGA Registered: ARTG 340309• Made by a CE approved manufacturer of PPE
Surgical Scarf Tie Back
Single Use Scarf
Group Name Description TGA Dispenser Qty Carton Qty
Cap SCA-TIE-BLU SURGICAL SCARF, TIE BACK - BLUE (96 X 96CM) 340309 100 1000
Cap SCA-TIELG-BLU SURGICAL SCARF, TIE BACK - BLUE (LARGE 109X109X153CM) 340309 100 1000
Cap SCA-TIELG-PINK SURGICAL SCARF, TIE BACK - PINK (LARGE 109X109X153CM) 340309 100 1000
Surgical Hood
Structure & Performance.• Compostion: 100% Polypropylene (PP) 35 gsm • Size: Small and Regular• Fluid Resistant• TGA Registered• Made by a CE approved manufacturer of PPE
Surgical Hood
Single UseHood
Group Name Description TGA Dispenser Qty Carton Qty
Cap SHO-SMA-BLU SURGICAL HOOD, SMALL TIES, BLUE 346954 100 1000
Cap SHO-REG-BLU SURGICAL HOOD, REGULAR TIES, BLUE 346954 100 1000
Protection Levels & Certification.
To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA1 To order, please contact Simba | Email: [email protected] | Phone: 1300SIMBA116 17
Simba Single Use Aprons Protects healthcare workers from micro organisms, body fluids and particulate matter.
Structure & Performance.• LDPE • 11 grams per piece• TGA Registered
Group Name Description Dimension TGA Dispenser Qty Carton Qty
Apron CDA-PE-24M DISPOSABLE APRON 24MICRON WHITE 80 X 140CM 341623 80 800
Disposable Apron
Single Use Isolation Apron
Simba Low Boot Cover This precaution shoe cover is made from fluid resistant SMS material which provides maximum comfort and protection.
Structure & Performance.• CPE3g• 17 x 40cm• TGA Registered
Protection Levels & Certification.
Shoe Covers
Group Name Description TGA Dispenser Qty Carton Qty
Shoe Cover SCO-OVER-NONSLI30 SHOE COVER PROTECTIVE NON SLIP 344161 100 1000
289-311 Bayswater Road | Bayswater North | Victoria 3153 | Australia
We are Simba.
Our promise is simple. The best value durable and comfortable medical textiles
matched with excellent customer service.
We are better together.