pesd5v0s1ua; pesd12vs1ua unidirectional esd ......1.2 features 1.3 applications 1.4 quick reference...
TRANSCRIPT
1. Product profile
1.1 General descriptionUnidirectional ElectroStatic Discharge (ESD) protection diodes in a very smallSurface-Mounted Device (SMD) plastic package designed to protect one signal linefrom the damage caused by ESD and transient overvoltage.
1.2 Features
1.3 Applications
1.4 Quick reference data
PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltagesuppressionRev. 01 — 9 February 2009 Product data sheet
Table 1. Product overview
Type number Package Configuration
Nexperia JEITA
PESD5V0S1UA SOD323 SC-76 single
PESD12VS1UA
n Transient Voltage Suppression (TVS)protection of one line
n ESD protection up to 30 kV
n Max. peak pulse power: PPP = 890 W n IEC 61000-4-2; level 4 (ESD)n Low clamping voltage: VCL = 19 V n IEC 61000-4-5 (surge); IPP = 47 An Low leakage current: IRM = 300 nA n AEC-Q101 qualified
n Computers and peripherals n Communication systemsn Audio and video equipment n Portable electronicsn Cellular handsets and accessories n Medical and industrial equipment
Table 2. Quick reference dataTamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
VRWM reverse standoff voltage
PESD5V0S1UA - - 5 V
PESD12VS1UA - - 12 V
Cd diode capacitance f = 1 MHz; VR = 0 V
PESD5V0S1UA - 480 530 pF
PESD12VS1UA - 160 180 pF
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
2. Pinning information
[1] The marking bar indicates the cathode.
3. Ordering information
4. Marking
5. Limiting values
Table 3. Pinning
Pin Description Simplified outline Graphic symbol
1 cathode [1]
2 anode21
006aaa152
21
Table 4. Ordering information
Type number Package
Name Description Version
PESD5V0S1UA SC-76 plastic surface-mounted package; 2 leads SOD323
PESD12VS1UA
Table 5. Marking codes
Type number Marking code
PESD5V0S1UA AV
PESD12VS1UA AW
Table 6. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
PPP peak pulse power tp = 8/20 µs [1][2]
PESD5V0S1UA - 890 W
PESD12VS1UA - 600 W
IPP peak pulse current tp = 8/20 µs [1][2]
PESD5V0S1UA - 47 A
PESD12VS1UA - 22.5 A
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 2 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
[1] Non-repetitive current pulse 8/20 µs exponential decay waveform according to IEC 61000-4-5.
[2] Soldering point of cathode tab.
[3] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standardfootprint.
[4] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
[1] Device stressed with ten non-repetitive ESD pulses.
Ptot total power dissipation Tamb ≤ 25 °C [3] - 360 mW[4] - 500 mW
Tj junction temperature - 150 °C
Tamb ambient temperature −55 +150 °C
Tstg storage temperature −65 +150 °C
Table 7. ESD maximum ratingsTamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions Min Max Unit
VESD electrostatic discharge voltage IEC 61000-4-2(contact discharge)
[1] - 30 kV
machine model - 400 V
MIL-STD-883 (humanbody model)
- 16 kV
Table 8. ESD standards compliance
Standard Conditions
IEC 61000-4-2; level 4 (ESD) > 15 kV (air); > 8 kV (contact)
MIL-STD-883; class 3 (human body model) > 4 kV
Table 6. Limiting values …continuedIn accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 3 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
6. Thermal characteristics
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
[3] Soldering point of cathode tab.
Fig 1. 8/20 µs pulse waveform according toIEC 61000-4-5
Fig 2. ESD pulse waveform according toIEC 61000-4-2
t (µs)0 403010 20
001aaa630
40
80
120
IPP(%)
0
e−t
100 % IPP; 8 µs
50 % IPP; 20 µs
001aaa631
IPP
100 %
90 %
t
30 ns
60 ns
10 %
tr = 0.7 ns to 1 ns
Table 9. Thermal characteristics
Symbol Parameter Conditions Min Typ Max Unit
Rth(j-a) thermal resistance fromjunction to ambient
in free air [1] - - 345 K/W[2] - - 250 K/W
Rth(j-sp) thermal resistance fromjunction to solder point
[3] - - 90 K/W
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 4 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
7. Characteristics
[1] Non-repetitive current pulse 8/20 µs exponential decay waveform according to IEC 61000-4-5.
Table 10. CharacteristicsTamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
VRWM reverse standoff voltage
PESD5V0S1UA - - 5 V
PESD12VS1UA - - 12 V
IRM reverse leakage current
PESD5V0S1UA VRWM = 5 V - 0.3 4 µA
PESD12VS1UA VRWM = 12 V - < 1 100 nA
VBR breakdown voltage IR = 5 mA
PESD5V0S1UA 6.2 6.8 7.3 V
PESD12VS1UA 13.3 14.5 15.75 V
Cd diode capacitance f = 1 MHz;VR = 0 V
PESD5V0S1UA - 480 530 pF
PESD12VS1UA - 160 180 pF
VCL clamping voltage [1]
PESD5V0S1UA IPP = 47 A - - 19 V
IPP = 25 A - - 13.5 V
IPP = 5 A - - 9.8 V
PESD12VS1UA IPP = 22.5 A - - 27 V
IPP = 15 A - - 23.5 V
IPP = 5 A - - 19 V
rdif differential resistance IR = 5 mA
PESD5V0S1UA - 2 100 Ω
PESD12VS1UA - 5 100 Ω
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 5 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
Tamb = 25 °C(1) PESD5V0S1UA
(2) PESD12VS1UA
Fig 3. Peak pulse power as a function of exponentialpulse duration; typical values
Fig 4. Relative variation of peak pulse power as afunction of junction temperature; typicalvalues
f = 1 MHz; Tamb = 25 °C(1) PESD5V0S1UA
(2) PESD12VS1UA
(1) PESD5V0S1UA
(2) PESD12VS1UA
Fig 5. Diode capacitance as a function of reversevoltage; typical values
Fig 6. Reverse leakage current as a function ofambient temperature; typical values
tp (µs)101 104103102
006aab414
103
102
104
PPP(W)
101
(1)
(2)
Tj (°C)0 20015050 100
001aaa193
0.4
0.8
1.2
PPP
0
PPP(25°C)
006aab415
VR (V)0 1284
200
300
100
400
500
Cd(pF)
0
(1)
(2)
006aab416
1
10
102
103
IRM(nA)
10−1
Tamb (°C)−75 17512525 75−25
(1)
(2)
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 6 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
Fig 7. V-I characteristics for a unidirectional ESD protection diode
006aaa407
−VCL −VBR −VRWM
−IRM−IR
−IPP
V
I
P-N
− +
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 7 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
Fig 8. ESD clamping test setup and waveforms
006aab417
50 Ω
RZ
CZ
DUT(DEVICEUNDERTEST)
GND
450 ΩRG 223/U50 Ω coax
ESD TESTERacc. to IEC 61000-4-2
CZ = 150 pF; RZ = 330 Ω
4 GHz DIGITALOSCILLOSCOPE
10×ATTENUATOR
unclamped +8 kV ESD pulse waveform(IEC 61000-4-2 network)
clamped −8 kV ESD pulse waveform(IEC 61000-4-2 network)
vertical scale = 10 A/divhorizontal scale = 15 ns/div
GND
unclamped −8 kV ESD pulse waveform(IEC 61000-4-2 network)
vertical scale = 10 A/divhorizontal scale = 15 ns/div
clamped +8 kV ESD pulse waveform(IEC 61000-4-2 network)
vertical scale = 10 V/divhorizontal scale = 10 ns/div
vertical scale = 10 V/divhorizontal scale = 10 ns/div
PESD5V0S1UA
PESD12VS1UA
PESD12VS1UA
PESD5V0S1UA
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 8 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
8. Application information
PESD5V0S1UA and PESD12VS1UA are designed for the protection of one unidirectionaldata or signal line from the damage caused by ESD and transient overvoltage.The devices may be used on lines where the signal polarities are either positive ornegative with respect to ground.
The PESD5V0S1UA provides a surge capability of 890 W and the PESD12VS1UAprovides a surge capability of 600 W per line for an 8/20 µs waveform.
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD and Electrical FastTransient (EFT). The following guidelines are recommended:
1. Place the device as close to the input terminal or connector as possible.
2. The path length between the device and the protected line should be minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power andground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use groundvias.
Fig 9. Application diagram
006aab251
GND
line to be protected(positive signal polarity)
DUT
unidirectional protection of one line
GND
line to be protected(negative signal polarity)
DUT
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 9 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
9. Test information
9.1 Quality informationThis product has been qualified in accordance with the Automotive Electronics Council(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and issuitable for use in automotive applications.
10. Package outline
11. Packing information
[1] For further information and the availability of packing methods, see Section 15.
Fig 10. Package outline PESDxS1UA (SOD323/SC-76)
03-12-17Dimensions in mm
0.250.10
0.450.15
2.72.3
1.81.6
0.400.25
1.10.8
1.351.15
1
2
Table 11. Packing methodsThe indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number Package Description Packing quantity
3000 10000
PESD5V0S1UA SOD323 4 mm pitch, 8 mm tape and reel -115 -135
PESD12VS1UA
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 10 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
12. Soldering
Fig 11. Reflow soldering footprint PESDxS1UA (SOD323/SC-76)
Fig 12. Wave soldering footprint PESDxS1UA (SOD323/SC-76)
0.951.65
2.2
2.1
3.05
solder lands
solder resist
occupied area
solder paste
0.5(2×)0.6(2×)
0.6 (2×)0.5 (2×)
sod323_fr
Dimensions in mm
1.5 (2×)
2.9
5
1.2(2×)
2.75
sod323_fw
solder lands
solder resist
occupied area
preferred transportdirection during soldering
Dimensions in mm
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 11 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
13. Revision history
Table 12. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PESD5V0S1UA_PESD12VS1UA_1 20090209 Product data sheet - -
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 12 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
14. Legal information
14.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product statusinformation is available on the Internet at URL http://www.nexperia.com.
14.2 Definitions
Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequences ofuse of such information.
Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet is intendedfor quick reference only and should not be relied upon to contain detailed andfull information. For detailed and full information see the relevant full datasheet, which is available on request via the local Nexperia salesoffice. In case of any inconsistency or conflict with the short data sheet, thefull data sheet shall prevail.
14.3 Disclaimers
General — Information in this document is believed to be accurate andreliable.However,Nexperiadoesnotgiveany representationsorwarranties, expressed or implied, as to the accuracy or completeness of suchinformation and shall have no liability for the consequences of use of suchinformation.
Right to make changes — Nexperia reserves the right tomakechanges to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.
Suitability for use — Nexperia products are not designed,authorized or warranted to be suitable for use in medical, military, aircraft,space or life support equipment, nor in applications where failure ormalfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmental
damage. Nexperia accepts no liability for inclusion and/or use ofNexperia products in such equipment or applications andtherefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makes norepresentation or warranty that such applications will be suitable for thespecified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) may cause permanentdamage to the device. Limiting values are stress ratings only and operation ofthe device at these or any other conditions above those given in theCharacteristics sections of this document is not implied. Exposure to limitingvalues for extended periods may affect device reliability.
Terms and conditions of sale — Nexperia products are soldsubject to the general terms and conditions of commercial sale, as publishedat http://www.nexperia.com/profile/terms, including those pertaining to warranty,intellectual property rights infringement and limitation of liability, unlessexplicitly otherwise agreed to in writing by Nexperia. In case ofany inconsistency or conflict between information in this document and suchterms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or thegrant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.
Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.
14.4 TrademarksNotice: All referenced brands, product names, service names and trademarksare the property of their respective owners.
15. Contact information
For more information, please visit: http://www .nexperia.com
For sales office addresses, please send an email to: [email protected]
Document status [1] [2] Product status [3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
PESD5V0S1UA_PESD12VS1UA_1
Product data sheet Rev. 01 — 9 February 2009 13 of 14
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0S1UA; PESD12VS1UAUnidirectional ESD protection for transient voltage suppression
16. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1 General description. . . . . . . . . . . . . . . . . . . . . . 11.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 12 Pinning information . . . . . . . . . . . . . . . . . . . . . . 23 Ordering information . . . . . . . . . . . . . . . . . . . . . 24 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 26 Thermal characteristics. . . . . . . . . . . . . . . . . . . 47 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Application information. . . . . . . . . . . . . . . . . . . 99 Test information . . . . . . . . . . . . . . . . . . . . . . . . 109.1 Quality information . . . . . . . . . . . . . . . . . . . . . 1010 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 1011 Packing information. . . . . . . . . . . . . . . . . . . . . 1012 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1113 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 1214 Legal information. . . . . . . . . . . . . . . . . . . . . . . 1314.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 1314.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1314.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1314.4 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 1315 Contact information. . . . . . . . . . . . . . . . . . . . . 1316 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: [email protected] Date of release: 09 February 2009