petroleum product storage tank...
TRANSCRIPT
L o o k N o F u r t h e r
| Since Year 2000
EXTERNAL FLOATING ROOF TANK DRAIN
PETROLEUM PRODUCT STORAGE TANK SOLUTIONS:
MAX-FLOW™ TANK DRAIN SYSTEM BY CHARTER INDUSTRIAL:
Charter Industrial’s MaxFLOW™ tank drain system allows fastest possible drainage
of water via Full Flow assembly process which allows maximum drainage of rain
water in shortest time through smooth bore inner fluid way from one end to other
end. This, among others is a critical and unique feature in all Charter MaxFLOW™
tank drain systems.
The MaxFLOW™ assemblies are used in a variety of petroleum products stored in
tanks. Standard chemical aromatic resistance starting at 70% to 100% compatibility
upon customer request. MaxFLOW™ assemblies are manufactured in U.S.A with the
strictest of quality control procedures in accordance to ISO 9001:2008.
Every assembly from start to finish is inspected, measured, tested, tagged, and
serialized to ensure the highest quality product is delivered to each and every
customer around the world.
MAXFLOW™ Features:
• Full Flow Design and Construction
• Smooth Bore Fluid Way from End to End
• Standard Working Pressure of 150 psi
• Specially Formulated Rubber Compound for 70% to 100% Aromatic Compatible with Most Petroleum Products
• Spring Tempered, High Carbon Steel Double Helical Wire
• Internally Expanded Connection of Hose-to-Fitting and Air Tight Seal
• Heavy Polyester Protective Jacket or Stainless Steel Exoskeletal Protection to safe guard hose from external damages.
• The temperature range (-40 degree F to 300 degree F)
L o o k N o F u r t h e r
| Since Year 2000
MORE FEATURES: • Single-Coil Repeated Lay Pattern • 150 lbs RF Flange on Both Ends• Abrasion Resistance to ensure Long Service Life • Secure-Mount Installation Package • Made in the USA • Full 5 Year Warranty (Standard)(Consultation, supervision, and installation drawings are available upon request)
*FOR FURTHER TECHNICAL ASSISTANCE AND DATA ON MAXFLOW DRAIN SYSTEMS, PLEASE SEND YOUR QUESTIONS TO: [email protected]
CHARTER’S TANK DRAIN SOLUTION ADVANTAGE: • Fast Response Time and Delivery
• Full 5 Year Warranty
• Unparalleled Long Service Life
• 70% - 100% Aromatic Resistance Application
• Low Maintenance
www.charterindustrial.com
7832 Ostrow Street San Diego, CA 92111Phone: (858) 467-0200 Emergency, 24/7: (866)-517-2125 Fax: (858) 467-0222 Email: [email protected]
Vapor Sleeve
Limit emissions.
Reduce product loss.
Improve air quality.
Charter Industrial, PTP Division Gauge Pole Covers
reduce hydrocarbon vapors from escaping from
petroleum storage tanks via the slotted gauge pole
and/or the gauge well.
Charter Industrial manufactures all Petroleum Storage Tank Solutions in accordance
to the highest industry standards as a certified ISO 9001 registered company.
Charter Industrial PTP Vapor Sleeve is made with the most experienced manufacturing personnel available in the industry in addition to utilizing the highest chemically compatible urethane material.
Each individual gauge pole cover is specifically engineered and manufactured according customer specifications, individual tank designs, and EPA regulations.
Charter Industrial PTP Vapor Sleeve Advantage
• Reduce costs associated with product loss • Virtually eliminate product emissions
• Comply with regulations and environmental standards
• Specially designed for each Internal or External Floating Roof Tanks
• Allows real time product measurement without associated product loss
• Excellent chemical resistance and UV protection
• Extremely flexible design while maintaining shape & function
• Easy to install design
• Vapor proof “Zip-Lock” style zipper
• Reinforced with interlocking “Tooth” style zipper
• Proprietary transition box design (optional) offers superior
vapor retention and leak prevention
• All gauge pole covers are specially designed for each tank
• Can be installed while tank is in operation
• Unmatched abrasion resistance and chemical compatibility
Gauge Pole Cover
7832 Ostrow St. | San Diego, CA 92111 | Office: 858-467-0200 | Fax: 858-467-0222 | www.charterindustrial.com
L o o k N o F u r t h e r
| Since Year 2000
PETROLEUM PRODUCT STORAGE TANK SOLUTIONS:
PRIMARY MECHANICAL SHOE SEAL:
simple design. It is easy to install without hot work, such as welding, and
The shoes are held in permanent contact with tank shell and extend into the
• Complies with 650 Appendix C• Compatible with all stored products
• Relatively low cost
CHARTER’S PRIMARY MECHANICAL SHOE SEAL ADVANTAGE:
7832 Ostrow Street San Diego, CA 92111Phone: (858) 467-0200 Emergency, 24/7: (866)-517-2125 Fax: (858) 467-0222 Email: [email protected]
www.charterindustrial.com
product by hanger arms. The pusher spring material is high tensile
• Compatible with welded, lapped or riveted tanks• Available with secondary seal
• Long service life & maintenance free• Easy to install - No welding or plasma cutting
The spring type or "scissor type" mechanical shoe seal has an economical and
offers excellent seal performance.
from the atomosphere.
The vapor membrane covers the vapor space between the shoe and the roof
Plate against the tank wall on the upper and lower part of the plate. stainless spring steel. Two compression plates apply pressure to the Shoe
L o o k N o F u r t h e r
| Since Year 2000
7832 Ostrow Street San Diego, CA 92111Phone: (858) 467-0200 Emergency, 24/7: (866)-517-2125 Fax: (858) 467-0222 Email: [email protected]
www.charterindustrial.com
PETROLEUM PRODUCT STORAGE TANK SOLUTIONS:
SECONDARY SEAL: The secondary seal reduces the evaporation losses of the primary seal and it also prevents rainwater and other products from falling into the stored product. The compression plate may be mounted on horizontal or vertical type of roof rims and is made to accept specific bolt pitching. The overlapping of compression plates gives strong sealing pressure to the tank shell.
API 2003.
• Rim mounted type• High sealing efficiency & durable service life
• Compatible with all stored products
CHARTER’S SECONDARY SEAL ADVANTAGE:
• Can be installed with either a vertical or horizontal rim plate
• Large wiper seal contact to the tank shell• No scratching or damage to the tank shell
• Foam port is available (*option)
The wiper tip is constructed of UV and weather resistant synthetic rubberwith high sealing efficiency. The shunt complies with
• Easy installation and accessiblity during operating
L o o k N o F u r t h e r
| Since Year 2000
PETROLEUM PRODUCT STORAGE TANK SOLUTIONS:
ALUMINUM INTERNAL FLOATING ROOF The internal floating roof consists of float tubes joined together by clamp beams on deck skin are fitted and equipped with a continuous closure device (primary / secondary seal) and between the tank shell and the floating roof edge.
The purpose of the internal floating roof is to have a minimal vapor zone above the stored liquid.
This system reduces emissions and evaporative losses
vapor zone from the fixed roof storage tanks.
Our internal floating roof complies with environmental regulations and the latest edition of API 650 Appendix H standard.
through an existing manhole.
7832 Ostrow Street San Diego, CA 92111Phone: (858) 467-0200 Emergency, 24/7: (866)-517-2125 Fax: (858) 467-0222 Email: [email protected]
www.charterindustrial.com
of stored products and the tank its subjected to less corrosion and oxidizing elements by removing the
Floating roof design has been the most widely used system for storage of petroleum products.
All parts are manufactured under Charter's quality control and all float tubes are leak-tested. All components can be accessed
L o o k N o F u r t h e r
| Since Year 2000
*FOR FURTHER TECHNICAL ASSISTANCE AND DATA, PLEASE SEND YOUR QUESTIONS TO: [email protected]
CHARTER’S INTERNAL
• Reduce product evaporation loss
• Reduce potential for vapor space explosions and fire hazards
• Preserve the environment
• Better peripheral sealing and lower seal cost
• Long service life
7832 Ostrow Street San Diego, CA 92111Phone: (858) 467-0200 Emergency, 24/7: (866)-517-2125 Fax: (858) 467-0222 Email: [email protected]
www.charterindustrial.com
• Complies with API 650 Appendix H standard
• Compatible with most stored products
• Designed to access all components through a manhole
• Single wiper seal
• Primary foam seal
• Primary mechanical shoe seal
•
•
SEAL TYPE:
Secondary wiper seal
• No regular maintenance required
FLOATING ROOF ADVANTAGE: