philmore pg. 129-144 catalog
DESCRIPTION
Philmore pg. 129-144 CatalogTRANSCRIPT
VIDEO CABLES
All cable assemblies listed below consist of RG59/U75 ohm low-loss coaxial cable carefully terminatedwith the connectors indicated. Cable assemblies withgold plated connectors have been identified by the let-ter (G). All connectors are molded on. All are suppliedindividually packaged for display rack sales. All cablesmay be ordered bulk packaged by adding suffix letter“B” to the part number.
RG59/U VIDEO JUMPER CABLES
RCA to RCA PHONO
“F” to RCA PHONO
75 ohm RG59/UCOMPUTER GRADE COAXIAL
CABLE ASSEMBLIESHigh quality molded-on connectors with strainrelief add physical reliability and assured contact tothe low-loss quality of RG59/U coaxial cable.Individually packaged for display rack sales. Forbulk pack, please add suffix letter “B” to the partnumber.
“F” to “F” SCREW-ONNo. CBF15No. CBF1No. CBF2No. CAF3No. CBF3No. CBFG3No. CAF6No. CBF6 No. CBFG6No. CAF10No. CBF10 No. CBFG10No. CAF18No. CBF18No. CBFG18No. CAF12 No. CAFG12 No. CBF12 No. CBFG12 No. CAF75No. CBF75No. CAF100 No. CAFG100 No. CBF100 No. CBFG100
6 inch. Black 1 ft. Black2 ft. Black3 ft. White3 ft. Black3 ft. Black (G)6 ft. White6 ft. Black6 ft. Black (G)12 ft. White12 ft. Black12 ft. Black (G)25 ft. White25 ft. Black25 ft. Black (G)50 ft. White50 ft. White (G)50 ft. Black50 ft. Black (G)75 ft. White75 ft. Black100 ft. White100 ft. White (G)100 ft. Black100 ft. Black (G)
No. CA902No. CA903No. CA904No. CA925No. CA950No. CA957No. CA905No. CA906No. CA907 No. CBF55No. CA915No. CA917No. CA908No. CA909No. CA910
3 ft.6 ft.
12 ft.25 ft.50 ft.100 ft.
3 ft.6 ft.
12 ft.25 ft. 50 ft.100 ft.
3 ft.6 ft.
12 ft.
BNC to BNC ConnectorsBNC to BNC ConnectorsBNC to BNC ConnectorsBNC to BNC ConnectorsBNC to BNC ConnectorsBNC to BNC ConnectorsRCA to RCA ConnectorsRCA to RCA ConnectorsRCA to RCA ConnectorsRCA to RCA ConnectorsRCA to RCA ConnectorsRCA to RCA ConnectorsRCA to BNC ConnectorsRCA to BNC ConnectorsRCA to BNC Connectors
No. CAF20 6 ft. WhiteNo. CAF21 12 ft. White
NOTE: See price list for those cables available in bulk. Add (B) suffix.
No. CAF33 3 ft. WhiteNo. CBF33 3 ft. BlackNo. CBFG33 3 ft. Black (G)No. CAF25 6 ft. WhiteNo. CBF25 6 ft. BlackNo. CBFG25 6 ft. Black (G)No. CAF50 12 ft. WhiteNo. CBF55 25 ft. Black No. CBFG55 25 ft. Black (G)
No. RG603 - 3 ft. Black
No. RG606 - 6 ft. Black
UL/CSA RG6/U with Weatherproof “F” ConnectorsDirect burial grade. Compatible with Mini Dish
Satellite Systems. 18 AWG, 1800 MHz
No. RG612 - 12 ft. BlackNo. RG625 - 25 ft. BlackNo. RG625W - 25 ft. WhiteNo. RG650 - 50 ft. BlackNo. RG650W - 50 ft. WhiteNo. RG675 - 75 ft. BlackNo. RG675W - 75 ft. WhiteNo. RG6100 - 100 ft. BlackNo. RG6100W - 100 ft. White
RG6/U Video Jumper CableUL/CSA RG6/U with molded “F” Type Connecter on both ends.
(G) = Gold Plated Connectors
RG6/U CONSTRUCTIONSPECIFICATIONS
RG6/U 18AWG 1800 MHz E124763 (UL)
Center Conductor
Insulation
Foil
Braid Shield
PVC Jacket
MaterialConstructO.D.MaterialThickO.D.ColorMaterialMaterialConstructMaterialO.D.Color
No./mmmm
mmmm
No./mm
mm
Copper Wire1 x 1.061.05PE Form1.725 ← 0.054.5 ← 0.1WhiteFoil with GelThe Copper Wire0.16/4/16PVC UL/CSA6.8 ← 0.15Black
“F” to “F” PUSH-ON
“F” to “F” PUSH-ONRight Angle
No. CAF30 3 ft. WhiteNo. CBF30 3 ft. BlackNo. CBFG30 3 ft. Black (G)No. CAF60 6 ft. WhiteNo. CBF60 6 ft. BlackNo. CBFG60 6 ft. Black (G)No. CAF90 12 ft. White
No. CBF40 3 ft. BlackNo. CBF70 6 ft. BlackNo. CBF80 25 ft. Black (G)
129
RG8X SUPER CABLES - 50 ohm
UHF Male toMale cablesfor connect-ing R.F.equipment. Aseries usinglow-lossRG8X coaxial cable that will handle morepower, more efficiently than most coaxialcables but without the bulky, hard to bendweight of RG-8 etc.
For long life under normal Ham-shacktype use, the UHF male connectors aremolded and very strong. The entire seriesis black in color. “Super” cables will be yourbest choice for hooking up the linear, SWRand power meters and switches in yourshack. May be used for computers too,wherever fifty ohm cable and UHF connec-tors are required.No. CA702 - RG8X UHF
male to male 1.5 ft.No. CA706 - RG8X UHF
male to male 3 ft.No. CA712 - RG8X UHF
male to male 6 ft.No. CA716 - RG8X UHF
male to male 12 ft.No. CA720 - RG8X UHF
male to male 18 ft.
130
VIDEO CABLES & MATCHING TRANSFORMERS
COAXIAL IN-LINE CONNECTOR
This in-line device allows user to splice coaxialcable to repair breaks or extend length of cable.For all coax cables up to O.D. of RG6/U cable.
BALUNS, MATCHING TRANSFORMERSNo. MT73
75-300 OHM UHF/VHF/FM BALUNSuperior three-capacitor design for effective blocking.
No. MT74300-75 OHM UHF/VHF BALUN
Hermetically sealed, molded PVC case assures completeresistance to all weather conditions. Superior three-capacitordesign for effective blocking.
Supplied with protective plastic removable boot.
WEATHER BOOT
75-300 MATCHING TRANSFORMERfor “Mini Televisions”
PUSH-ON BALUN MATCHING TRANSFORMERMatches 75 ohm Input to 300 ohm Lead-In
No. MT73B Bulk
No. MT73-4-Economy 4pack of No. MT73 75-300ohm Matching Transformer
No. MT80 Individually Packed
No. MT80B Bulk
No. MT80G-Gold Plated
No. MTB Bulk Only
Special Plug permits hook-up of externalantenna. Inserts into “ext. ant” jack on backof set. With 300 ohm terminals to attach toflat lead or for 75 ohm cable hook-up.
Weather resistant black rubberboot. For RG59/U and RG6/Ucable
OUTDOOR MATCHING TRANSFORMER
QUAD-COMPRESSION, QUAD SHIELDED RG6CABLES WITH WEATHERPROOF COMPRESSION‘F” CONNECTORS
There is no better RG6 videocable. The series is quad-shielded (100%shielding several times) and the center con-ductors are pure 18 gauge copper. We doNOT use steel for the center as it is lessconductive at lower frequencies, less reliablefor composite video applications and muchless flexible than pure copper. This seriesmay be used with all RF (television) as wellas composite video and even with audiousing F to RCA or F to BNC adaptors.
The compression “F” connectors are fully weatherproof;and these assemblies are very durable and reliable. The outer jacket isCMX and CL1 UL rated. The compression connector is our FC346B,the original and only completely reliable design that we have seen.
All of the following cables are black in color, male to malequad-shielded with “F” male compression connectors on both ends. Allcables may be ordered bulk packaged by adding suffix letter ”B” to thepart number.
No. 45-601 - Male to Male, Quad RG6 cable, 1’ lengthNo. 45-603 - Male to Male, Quad RG6 cable, 3’ lengthNo. 45-606 - Male to Male, Quad RG6 cable, 6’ lengthNo. 45-612 - Male to Male, Quad RG6 cable, 12’ lengthNo. 45-625 - Male to Male, Quad RG6 cable, 25’ lengthNo. 45-650 - Male to Male, Quad RG6 cable, 50’ lengthNo. 45-675 - Male to Male, Quad RG6 cable, 75’ lengthNo. 45-685 - Male to Male, Quad RG6 cable, 100’ length
DescriptionPart No.
Closed Circuit TV combina-tion VIDEO & POWER inone cable assembly.Philmore CCTV video cablesare true 75 ohm cable* withan additional universalpower cable. The videocable is terminated in BNCmales; may be used withPhilmore No. 957 (BNCfemale to RCA male adap-tor) if your system has RCAconnectors. The power cablesection is terminated in maleand female (universally used 2.1 x 5.5mm) DC coaxial connector.
These are very flexible cables, and are exceptional in deliveringlow loss signals over even the very longest cable runs.
*Most of our competition uses simple audio cable in place of true75 ohm coaxial video cable, which always results in at least somedegradation in picture quality. Our video cable is 100% Aluminum foilshield plus Copper braid. Center conductor is pure copper.
CCTV Power/Video Cable
No. 42-2025 - CCTV Power/Video cable 25 ft.No. 42-2035 - CCTV Power/Video cable 35 ft.No. 42-2050 - CCTV Power/Video cable 50 ft.No. 42-2075 - CCTV Power/Video cable 75 ft.No. 42-2100 - CCTV Power/Video cable 100 ft.No. 42-2150 - CCTV Power/Video cable 150 ft.
DescriptionPart No.
No. MT74B Bulk
No. MT82
No. CCS1
RG58/U Cable Assemblies
No. CA898 - 6 ft. BNC Male to UHF MaleNo. CA890 - 3 ft. UHF Male to UHF MaleNo. CA892 - 6 ft. UHF Male to UHF MaleNo. CA901 - 3 ft. BNC Male to
(2) Alligator clips (color coded)
131
VIDEO SWITCHES
A/B SWITCH BOXThe ultimate design in a video selector- ForStyling and Performance. Select perfectviewing from TV or VCR with this RF slideswitch. Mount conveniently anywhere withdurable, two-sided tape (supplied). 100%shielding assures removal of external inter-ference. High isolation of 90db over theentire TV band. Impedance: 75 ohm.
Economy A/B SWITCH BOX• Unique design with a single push but-ton switch located on the side.• PCB design, completely shielded• Size: 3-5/8”L x 1-3/4” W x 1”H
No. 42-212
A-B COAXIAL SWITCHES
2-Way CoaxialPush Button SwitchNo. AB6
3-Way CoaxialPush Button SwitchNo. AB7
SELECTS 75 OHM VIDEO DEVICES FOR VIEWING ONTV SET. ELIMINATES INTERFERENCE BETWEEN SIG-NALS BECAUSE OF A HIGH ISOLATION OF 950-890mHz.
NO BLEEDING - NO STATION INTERFERENCE -NO PICTURE LOSSA coaxial switch offers the user numerous other capabilities,such as; switching between directional antennas; cable andoutside TV antenna; computer inputs; etc.A zinc diecast inner case gives this switch complete internalprotection. Fully shielded with low conductivity gaskets. Supplied with double sided tape and connecting screws forease of mounting.
COAXIAL SWITCHING FOR TV AND VIDEOCASSETTE RECORDERSIsolation exceeds 40dB in the VHF range,greatly reducing interaction between channelsand protecting weaker signals against beingoverwhelmed by much stronger channels.Four “F” connectors accept 75 ohm coaxialcable with F-81 fitting for switching to variousselections of TV and antenna combinations.Push button switches are located convenientlyon top of the metal cabinet having keyholecutouts for flush wall mounting. Three 75 ohm resistors properly ter-minate any unused position.
Overall size: 3-9/16” x 2-3/4” x 2”
Input: 2 x 75 ohmsOutput: 75 ohmsInsertionLoss: 0.2 db
This convenient coaxialswitch allows the user toquickly change from stan-dard TV programming toother video devices suchas VCR, Videodisc andgames. Switch operates inthe 54-890 MHZ range.Return loss 20db, isolation60db.Size is 2” x 2-3/4” x 1”
COAXIAL GAME SWITCH
No. CS2
VIDEO DUBBING CABLE ASSEMBLYGold Plated Connectors,for mono recordingNo. VCK43T - 3 ft.No. VCK4T - 6 ft.No. VCK412T - 12 ft.No. VCK420T - 20 ft.Heavy duty paired cables, coaxial video and fully shielded audio.Terminated with molded RCA phono plugs, gold plated with built-instrain relief for reliable long term use.
Video Dubbing Cable Assemblyfor stereo recordingNo. VCK81T - 1.5 ft.No. VCK83T - 3 ft.No. VCK84T - 4.5 ft.No. VCK8T - 6 ft.No. VCK812T - 12 ft.No. VCK820T - 20 ft.No. VCK825T - 25 ft.No. VCK850T - 50 ft.No. VCK875T - 75 ft.No. VCK810T - 100 ft.
No. CS4S 3 Position Coaxial Push-Button Switch
Security Camera Adaptors:DC Power Adaptor cables use a video dubbing cable, such as LKG’SVCK series on page 68, to make an extension cable for CCD VideoCameras. These unique 6” adaptor cables allow you to use one of theaudio cables with RCA male connectors to extend the DC power tothe camera. Converts RCA male plugs to 2.1x 5.5mm DC power con-nectors.
No. 42-210 RCA Jack-2.1mm x 5.5mm DC Plug Adaptor.No. 42-257 RCA Jack-2.1mm x 5.5mm DC Jack Adaptor.
No. 42-467 ADAPTOR KITKit contains the following adaptors:(1) No. 42-210 RCA Jack-2.1mm x 5.5mm DC Plug Adaptor.(1) No. 42-257 RCA Jack-2.1mm x 5.5mm DC Jack Adaptor.(2) No. SA13 (RCA Female Coupler)
No. AB8
132
BAND SEPARATORS, SPLITTERS....perfectly designed and matched for TV and FM signalscoming from the UHF-VHF-FM BANDS. Heavy duty wire andcable prevents broken connections. Non-strip piercingscrews are made of plated brass for corrosion-free reliability.Add suffix letter “B” to part number for bulk pack.
No. MT7775-300 OHM BALUN
WITH UHF/VHF/FM SPLITTERMatches impedance between 75ohm coaxial cable and 300 ohmTV and FM antenna inputs. It sep-arates the three signals from the3-way antenna into individual sig-nals for UHF, VHF and FM. Twooutputs connect to the UHF, VHFantenna terminals on rear of the TV set. Separate screw terminalconnects 300 ohm twin lead to the FM receivers. For VCR’s too.
No. MT7875-300 OHM BALUN AND
UHF/VHF/FM BAND SEPARATORSeparates incoming signals froma 75 ohm antenna downlead intoUHF, VHF and FM bands. Thecoaxial 75 ohm cable is fittedwith an “F” connector to accom-modate the VHF terminal on rearof TV set or VCR. The 300 ohm output for UHF connects to thereceiver with heavy, hook terminated wires.
No. MT8875 ohm VHF + 300ohm UHF to 75 ohm push-on male.
No. CA280
300 OHM JUMPER CABLE300 ohm cable, twin lead, with spade lug on both ends for extension leadbetween VCR and TV, 6ft.
SEPARATOR/COMBINER BALUNSDesigned expressly for TV sets with “F” coaxial jack input, these baluns will accept75 ohm coax or 300 ohm twin lead input and combine them, feeding them to theset through a push-on “F” connector on the back of each type. These combinersmay be used as separators because they can function with signal fed in eitherdirection. Individually packaged for display rack, they may be obtained bulkpacked by adding suffix letter “B” to the part number.
(Back View)
No. MT8675 ohm VHF + 75 ohmUHF to 75 ohm push-on male.
No. MT87300 ohm VHF + 300 ohmUHF to 75 ohm push-on male.
VIDEO AMPLIFIERS & SPLITTERS
UHF/VHF/FM HIGH GAIN DISTRIBU-TION AMPLIFIER (with FM TRAP)
No. DA27BTraps out strong FM interference from TV.
SPECIFICATIONS:Band Width: 50 to 400 Mhz. 470 to 890 Mhz.Output Capability: 40 dbmVGain: 25db 23dbNoise Figure: 3.5 db 7.5 dbFM Trap Attenuation: -20 db (switchable) 95 - 108 MHz.Input: 75 ohm, “F” type coax connectorOutput: 75 ohm, “F” type coax connectorPower Source: 120VAC 60HzDimensions: 3-3/32” x 6-5/8” x 1-7/16”
10 db VCR/TV SIGNAL AMPLIFIER50-900MHz
6 db VCR/TV SIGNAL AMPLIFIERwith 2 OUTPUTS 50-900MHz
10 db VCR/TV SIGNAL AMPLIFIERwith 4 OUTPUTS 50-900MHz
Sharpens and improves pic-ture quality by restoring signalloss that occurs in some 75ohm connections. Standard“F” connectors; 117 volt @1.2 watt operation. Boostsboth TV and FM radio sys-tems. No. DA10B
Single 75 ohm input fromantenna or cable systemwith two 75 ohm outputs.Standard “F” connectors;117 volt @ 1.2 watt (10mA)operation.No. DA12B
Single 75 ohm input fromantenna or cable systemwith four 75 ohm outputs.Standard “F” connectors;117 volt @ 1.2 watt (10mA)operation.No. DA14B
*ALL PHILMORE Signal Amplifiers cover to 900 MHz and can beused to amplify cable signal.
133
TV - FM ANTENNAS
ULTRA MODERN ALL - CHANNEL VHF/UHF/FMANTENNA
New stream lined design ofthis antenna provides lowprofile, pleasing appearance.The unit has 12 position tun-ing circuit to maximize signalstrength.
No. 46-600
UHF LOOP ANTENNA
Ideal replacement for use onmost TV’s... Color or black andwhite. Provides excellent recep-tion for all local UHF channels.Universal mounting bracket withswivel adjustment for back-of-setmounting.
No.46-200
UHF BOW-TIE ANTENNA
For color or black andwhite, this unique univer-sal snap-on type antennais for UHF channels 14-83. Snap on to VHFantenna rod. With lead wire and terminals.
No. 46-202
VHF ANTENNA
Attractive top-of-set antenna.4-section, telescopingdipoles extend a full 38”.Extra high impact poly-styrene base with feltpadded bottom. Completewith lead wire and terminals.
No. 32300
AUTOMATIC ROTORHeavy-Duty antenna rotor for all TV antenna applica-tions.The automatic antenna control indicates the posi-tion of the antenna.
• Power Requirements: 115VAC, 60 Hz., .5 Amp• Rotation: 360º in 78 seconds• Mast Diameter: 1-1/8” - 1-3/4”• Motor Voltage: 18VAC• Zinc Die-cast weatherproof motor housing
Replacement antenna for:Panasonic, RCA, Quasarand others
“T” SHAPED DIPOLE ANTENNA
The flexibility of this foldeddipole antenna enables it to beplaced anywhere in back of theTV or FM set-even if hookedup out of sight, the signalcomes in strong and sharp.The 300-ohm twin lead hasmeasurements of 6-1/2 feet.The ends of each lead aresecured with plastic tabs foreasy mounting, while bottom ofsection has two spade lugs for attachment to TV or FM set.
No. 46-500
PANASONIC TYPE ANTENNA
VHF/UHF/FM ANTENNAThis VHF/UHF/FM antenna is great for use with mini dish systems to pickup local stations, as a replacement for a built-in antenna or to improveFM reception
FeaturesOutput: 75ohmVHF/FM Ant: 5 sections 36” RodVHF Ant: 6” Loop
• Five section • Approximately 39” extended
No. 5031TVNo. 5031TVB - Bulk packed
No. AR-303
No. 46-320
134
VIDEO MAINTENANCE ACCESSORIES
VHS TAPE REWINDER/FORWARDER & CLEANER
Unique, time-saver saves wearand tear on VCR by rewindingor fast forwarding VHS tapes,while cleaning them at thesame time. Just insert tape,push rewind or fast forward andclean button. Fast. Signals byplaying a melody when finished.Includes 3 replacement clean-ing bars. 110V AC.
No. V620No. V621 - Pkg. of 2 replacement cleaning bars
VHS TAPE REWINDER• Saves time and wear on VCR’s• Automatic shut-off system when
tape is rewound• Automatic start when lid is
closed• Indicator light during rewinding • One touch operation
No. UV520
Place cleaning solution on tape per instructions, run VCR 10seconds on “PLAY” and video heads, rollers etc. are safelycleaned providing a sharper picture...plus saving wear andtear on unit. Do not rewind.
VIDEO TAPE REPAIR KITEasy to use kit to repair VHS or BETAtapes. Includes both leader tapes, splicingjig, cutting blade. adhesive tape andinstructions. Also use for editing.
No. CB8 - Complete Kit
VCR HEAD CLEANERSafely cleans video and audio recordingheads. Foam-tipped swabs provided to applycleaning fluid. For use on all types of videoand audio recording heads. Contains 2 oz.bottle of special cleaning solution and assort-ment of swabs. Use to prevent flutter, distor-tion, head wear, tape damage etc. Instructionsincluded.No. CB460 - Complete KitNo. CB402 - 2 oz. Fluid only
FOAM CLEANING SWABS
By keeping heads clean on recorders, the equipment will operatelonger. These swabs are not cotton but soft foam, making them lint-less, as well as reusable. 6” long with 20 to blister card.No. SC20No. SC20B - Package of 100 Swabs
ALL-PURPOSE DUST CLEANER with 4 SLIP-ONADAPTOR TOOLS blows away dust particles from:
VCR’s, Computers & Cameras
No. BL6With a push button, blowaway dust, oxide particlesand simple dirt from hard toreach areas without damageto delicate equipment.Merely attach the appropri-ate adaptor from the toolsfurnished and Blow Mastercleans VCR heads, comput-er keyboards, terminals, diskdrives, camera optics anddozens of other delicatedevices where normal clean-ing is required. Includes abrush attachment whereblown air is not enough.Uses 2 “AA” batteries (notincluded).
ULTRA-CHEM Swabs
No. 50-150Double Tipped 6” (100 pk)
No. 50-288Chamois 3/8” X 3 1/2” (25 pk)
VHS WET-TAPE VIDEO HEAD CLEANER
No. CB2 - Economy VHS Video Cleaner
135
CIRCUIT BREAKERS
MODEL
B8003B8005B8007B8010B8015
CURRENT A
357
1015
RESISTANCE OHMS
.069
.030
.017
.011
.007
SNAP-IN CIRCUIT BREAKERPHILMORE’S NEW SNAP-IN CIRCUIT BREAKERSEND FUSE REPLACEMENT WORRIES
PUSH BUTTON CIRCUIT BREAKER
Easy to install. Where you use glass cartridge fuseholders, B-8000series can replace them without panel redesign or repunching. Thinkabout putting them out front. B-8000 series breakers can be prewiredand then snapped securely into the panel from the front.
A. 6.35mm terminals are plated and punched for quick connect ot solder connections. Easy to wire and install.
B. Special molded clips, snaps securely into standard 15.9mm panel cutouts. No redesign or repunching.
C. Trip indicator warns of a possible circuit problem. Choice of black or white
B7000 Series PUSH BUTTON THER-MAL CIRCUIT BREAKER
“B7000” Series breakers are UL 1077 recognized asSupplementary protectors, File E99607, and CSACertified as appliance Components protectors, FileLR62590.B7000 Series are single pole, thermal circuit breakersthat feature a recessed reset button which cannot bemanually pulled out to disconnect the circuit. When anoverload occurs and the breaker opens, it allows thereset button to “pop out” for visible trip indication.
No. B7000 - Clear plas-tic boot for Philmore No.B7000 - Series PushButton circuit breaker.Protects reset buttonfrom dust and moisture.
Part No.
B7003B7004B7005B7006B7007B7008B7010B7012B7015B7020B7025B7030B7035B7040B7045B7050
Amps
345678
10121520253035404550
MaximumResistance in
ohms.18
0.10.0260.15.020.020.014.010.010.006
0.005.004.004.004.002.002
Trip time @200% of rating
10-45 Seconds10-45 Seconds10-45 Seconds10-45 Seconds10-45 Seconds10-45 Seconds
6 to 30 Seconds6 to 30 Seconds6 to 30 Seconds6 to 30 Seconds6 to 30 Seconds6 to 30 Seconds6 to 30 Seconds6 to 30 Seconds6 to 30 Seconds6 to 30 Seconds
Endurance: 1,000 times at leastCalibration: Breaker will continuously carry 100% of rated load.It may trip between 101% and 144% of rated load, but musttrip at 145% at 25º C.Dielectric Strength: Over 1,500 volts RMS.Max. Operating Voltages: 50VDC, 250VACInterrupt Capacity: 2,000 Amps, at 50 VDC(1-30 amp Models)
1,000 Amps, at 250VAC (1-30 amp Models)
B-8000 SERIES SPECIFICATIONTHERMAL CIRCUITBREAKERS-FUSE HOLDER TYPE
- SNAP-IN TO INSTALL-MANUALLY RESET
1. VOLTAGE : 32VDC, 250VAC2. RESET TIME : 180 SECONDS MAX3. ENDURANCE : 1,000 TIMES AT LEAST4. WEIGHT : ALMOST 10g
Approvals
* Approval: 3 -30 A 125/250 VACc
* Approval: 5A, 10A, 15A, 20A125 VAC
136
CIRCUIT BREAKERS & SWITCH ACCESSORIES
MINIATURE PUSH BUTTON CIRCUIT BREAKER
Part No.
30-600330-600430-600530-601530-601830-6020
Amps
345
151820
Specifications:Standard Rating: 3-20 AMPERE.Input Power: 125 VAC / 250 VAC.Dielectric Strength: 1500 VAC / 1 Minute.Interrupt Capacity: 125 VAC x 1000 A, 250 VAC x 1000 A.Insulation Resistance: > 100 Meg Ohm.Calibration: 25ºC-105ºC of rated Current-Continuously Carried.
25ºC-Between 101% to 145%-May Trip or not.25ºC-150% of Rated current-Trip Within 1 Hour.25ºC-200% of Rated Current-Trip Within 1 Minute.
Contact Endurance: 125 VAC x 1505 of rated current-500 Cycles.Reset: Manual push reset/auto reset.
Maximum Resistancein ohms0.1200.1200.1000.0080.0070.007
Approvals* Approval: 3 -15 A 125/250 VAC
c
TERMINAL
Special Switch Accessories
No. 30-1450 fits SP Rocker switch-es up to 15mm (.59”)X 21mm (.82”)
No. 30-1455fits DP Rocker switchesup to 24mm (.94”) X21mm (.82”)
No. 30-1600 fits Round Rockerswitches up to 23mm(.90”) dia.
No. 30-1400fits Push ButtonSwitches with 15/32”X 32 bushing
No. 30-1000 fits Miniature &Sub Miniature toggleswitch
TOGGLE SWITCH SAFETY GUARD
FeaturesRugged Spring-loaded DesignBlack Steel Base w/ Red urea Plastic CoverFits ALL Metal Lever toggles w/ 15/32 X 32 Bushing
No. 30-1250 Toggle Switch Guard
Key Switch Protective Cover
This cover is designed to fit on standard key switches such asPhilmore 30-10076 and 30-1190 series and others to protectthem from moisture and damage.
No. 30-10079 Key Switch Cover
TOGGLE SWITCH HARDWARE
Part No.30-1320
Rubber BootThread Size: 15/32-32
Part No.30-1200
Rubber BootThread Size: M12 x 1.0
Part No.30-2200B
* Available in Bulk only.
137
SWITCHES SUB-MINIATURE PUSH BUTTON, PC MOUNT
Electrical Rating:Rating: 3 Amps with resistive load @ 120 VAC or 28 VDCor 1 Amp with resistive load @ 250 VACLife expectancy: 60,000 cycles @ full loadContact Resistance: 20 milliohms Max, initial @ 2-4 VDC100 mAInsulation resistance: 1,000 Megohms minimumDielectric Strength: 1,000 V RMS @ sea levelOperating Temperature: -30 to 85 degrees Celsius
Mechanical:Case: Dially phthalate (DAP) UL94-0Plunger: Thermo Plastic Polyester (Black)Housing: Stainless Steel Bushing: Brass N.P.Contacts: SilverTerminal: Brass, Silver plated.
Part No. Circuit
30-20522 SPST, OFF- (ON)
Part No. Circuit
30-20500 SPST, OFF- (ON)
Part No. Circuit
30-20507 SPDT, ON- (ON)
Part No. Circuit
30-20512 SPST, OFF-(ON)
Part No. Circuit
30-20516 SPDT, ON -(ON)
Right angle, horizontalstyle SPST
Right angle, horizontalstyle SPDT
Right angle, vertical styleSPST
Right Angle vertical styleSPDT
Vertical Mountingw/bracket SPST
NOTE: ( ) = Momentary
NOTE: ( ) = Momentary
NOTE: ( ) = Momentary
NOTE: ( ) = Momentary
NOTE: ( ) = Momentary
138
SWITCHES MINIATURE TOGGLE, PC mount
Electrical Rating:Contact rating: 5 amps @ 120 VAC or 28 VDC
2 amps @ 250 VAC resistive loadLife expectancy: 40,000 make-break cycles @ full load.Contact Resist.: 10 m ohm Max, initial @ 2-4 volts @100 mAInsulation resistance: 1,000 Megohms minimumDielectric Strength: 1,000 V RMS @ sea level.Operating temperature range: -30 to +85 degrees Celsius
Part No. Circuit Bushing
30-20038 SPDT ON-ON 1/4”-20 threaded30-20037 SPDT ON-ON Smooth 30-20048 DPDT ON-ON 1/4”-20 threaded30-20047 DPDT ON-ON Smooth
Printed Circuit-vertical mountingMiniature TOGGLE SWITCHES singlepole UL E 187490
Vertical mounting PC board switcheswith either a plain (smooth) bushing or with athreaded bushing and assembled hardware. Integral mounting brackets provide strengthand prevent switching action from stressingPC board pads
Mechanical:Case: Dially phthalate (DAP) (UL94V-0), epoxy sealed terms.Actuator: Brass, Chrome plated.Bushing: Brass, nickel plated Housing: Stainless steel.Switch support: Brass, tin platedTerminals: Gold plated Contact materials: coin silver.
SPDT
DPDT
Panel mounting dimen-sions for PC boardminiature switches
Electrical Rating:Contact rating: 5 amps @ 120 VAC or 28 VDC
2 amps @ 250 VAC resistive loadLife expectancy: 30,000 make-break cycles @ full load.Contact Resistance: 10 m ohms Max, @ 2-4 volts.@100 mAInsulation resistance: 1,000 Megohms minimumDielectric Strength: 1,000 V RMS @ sea level.Operating temperature range: -30 to +85 degrees Celsius
Part No. Circuit
30-20150 SPDT ON-ON30-20153 SPDT ON-(ON)30-20156 SPDT ON-OFF-ON30-20160 SPDT ON-OFF-(ON)
Printed Circuit Sealed Miniature ToggleSwitches Vertical Mounting
Vertical mounting PC board switches with a (smooth)bushing. This series is SEALED with special “O” rings in theactuator neck and EPOXY is applied around terminals wherethey enter the switch case. Switches sealed with epoxyaround the terminals are impervious to solder fluxes andcleaners. The “O” rings provide very good, long term resist-ance to environmental contamination.
Mechanical:Case: Glass-filled Nylon 66 (UL94V-0)Actuator: Brass, Chrome plated w/internal “O” ring seal.Switch support retainer: Stainless steel.Terminals: Gold Plated. Contact materials: coin silver.Special: Epoxy seal at contacts (against solder, flux remover)
Part No. Circuit
30-20170 SPDT ON-ON30-20172 SPDT ON-(ON)
HORIZONTAL RIGHT ANGLE MOUNT-ING - SEALED
NOTE: ( ) = Momentary
NOTE: ( ) = Momentary
139
SWITCHES MINIATURE TOGGLE, PC mount
Electrical Rating:Contact rating: 5 amps @ 120 VAC or 28 VDC
2 amps @ 250 VAC resistive loadLife expectancy: 40,000 make-break cycles @ full load.Contact Resist: 10 m ohms Max, initial @ 2-4 volts @100 mAInsulation resistance: 1,000 Megohms minimumDielectric Strength: 1,000 V RMS @ sea level.Operating temperature range: -30 to +85 degrees Celsius
Printed Circuit Miniature Toggle Switches Philmore PC mounting miniature switches are available in two bushing styles. When offered with a threaded bushing, hardware (nut and
washers) are included and assembled. Smooth, non-threaded bushings are also offered and the buyer needs to watch for this distinction tobe sure to get the correct style.
Philmore Printed Circuit board layout patterns include both conductor mounting holes and the mounting holes for mechanical sup-ports which are an integral part of toggles and some of the other styles, where they are needed.
Part No. Circuit Bushing
30-20004 SPDT ON-ON 1/4”-20 threaded30-20003 SPDT ON-ON Smooth
SPDT30-20006 ON-NONE (ON) 1/4”-20 threaded30-20005 SPDT ON-(ON)* Smooth30-20010 DPDT 1/4”-20 Threaded
ON-NONE (ON)30-20009 DPDT Smooth
ON-NONE (ON)
Printed Circuit-horizontalmountingMiniature TOGGLE SWITCHES
Right angle and horizontal mountingPC board switches with either a plain(smooth) bushing or with a threadedbushing and assembled hardware.
Coin silver contacts for currentcapacity; gold plated terminals.
Mechanical:Case: Dially phthalate (DAP) (UL94V-0), epoxy sealed terms.Actuator: Brass, Chrome plated.Bushing: Brass, nickel plated Housing: Stainless steel.Switch support: Brass, tin platedTerminals: Gold plated Contact materials: coin silver.
SPDT
DPDT
Panel mounting dimen-sions for PC boardminiature switches
Electrical Rating:Contact rating: 5 amps @ 125 VAC
2 amps @ 250 VACLife expectancy: 40,000 make-break cycles @ full load.Contact Resistance: 10 milliohms Max, initial @ 2-4 volts.
@100 mA for both silver and gold plated contacts.
Insulation resistance: 1,000 Megohms minimumDielectric Strength: 1,000 V RMS @ sea level.Operating temperature range: -30 to +85 degrees Celsius
Part No. Circuit Bushing
30-20018 SPDT ON-ON 1/4”-20 threaded30-20017 SPDT ON-ON Smooth 30-20026 DPDT ON-ON 1/4”-20 Threaded30-20025 DPDT ON-ON Smooth
Printed Circuit-vertical mounting Miniature TOGGLE SWITCHES
Right angle and vertical mounting PCboard switches with either a plain(smooth) bushing or with a threadedbushing and assembled hardware. Goldplated terminals, contacts are coin silver.UL Listed E187490
Mechanical:Case: Dially phthalate (DAP) (UL94V-0)Actuator: Brass, Chrome plated.Bushing: Brass, nickel plated Housing: Stainless steel.Switch support: Brass, tin platedTerminals: Gold plated Contact materials: Coin Silver.
Panel mounting dimen-sions for PC boardminiature switches
SPDT
DPDT
NOTE: ( ) = Momentary
140
SWITCHES MINIATURE SLIDE, PC MOUNT
Electrical Rating:Contact rating: 0.40 VA max. @ 20 V max. (AC or DC)Life expectancy: 20,000 make-break cycles Contact Resistance: 50 milliohms Max, initialMinimum Load: 10 mA 50 mVInsulation resistance: 1,000 Megohms minimumDielectric Strength: 1,000 V RMS @ sea level.
Part No. Circuit Application
30-20280 SPDT ON-ON DIGITAL, low voltages30-20284 SPDT ON-OFF-ON DIGITAL, low voltages30-20290 DPDT ON-ON DIGITAL, low voltages30-20292 DPDT ON-OFF-ON DIGITAL, low voltages
Printed Circuit MountingMiniature SLIDE SWITCHESDigital Circuit Service.
Gold contacts will assure constantdependability throughout the entire servicelife of the switch, even at very lowvoltage/currents. These are not powerswitches (see group below) but designed fordigital and other low current applications.
Mechanical:Case: Nylon, whiteHousing: Black Nylon.Actuator: Nylon, blackTerminals: Gold Plated. Contact materials: Gold
SPDT
DPDT
Electrical Rating:Contact rating: 3 Amps @ 120 VAC or 28 VDC (resistive)
1 Amps @ 250 VAC (resistive load)Life expectancy: 20,000 make-break cycles Contact Resistance: 50 milliohms Max, initialMinimum Load: 100 mA 10 VDCInsulation resistance: 1,000 Megohms minimumDielectric Strength: 1,000 V RMS @ sea level.Contacts: Silver Terminals: Gold
Printed Circuit MountingMiniature SLIDE SWITCHESfor Power Use.
Silver coined contacts are designed to handle power.This is the same switch as above, but with contactsmade for power applications, either 125 VAC or DCvoltages. Use same PC layout patterns and physicaldimensions; the only differences are internal to theswitch.
Part No. Circuit Application
30-20300 SPDT ON-ON Power 30-20304 SPDT ON-OFF-ON Power 30-20310 DPDT ON-ON Power 30-20312 DPDT ON-OFF-ON Power
SPDT
DPDT
141
SWITCHES Printed Circuit Tacticle
Current Rating: 50mA @ 125VDCInitial Contact Resistance: 100 Meg ohm (Max.)Insulation Resistance: 100 Meg ohm (Min.) @ 500 VDCDielectric Strength: 250V AC/ 1 minuteContact Material: Phosphor Bronze w/Silver CladdingTerminal Material: Brass with Silver Cladding
SPECIFICATIONS:
Housing6 x 6mm - 4.5mm H.6 x 6mm - 7.0mm H.6 x 6mm - 7.0mm H.6 x 6mm - 9.5mm H.
12 x 12mm - 4.3mm H.6 x 6mm - 11.8mm H.
Part No.30-1441130-1441230-1441430-1441530-14416
30-14418*
TerminalThrough Hole Mt.
Surface Mt.Through Hole Mt.
Surface Mt.Surface Mt.
Through Hole Mt.
TypeSPSTSPSTSPSTSPSTSPSTSPST
ActionOFFOFFOFFOFFOFFOFF
------
(ON)(ON)(ON)(ON)(ON)(ON)
NOTE: ( ) = Momentary*30-14418 is Right Angle
No. 30-14410 Designer KitKit contains No. 30-14411, No. 30-14412, No. 30-14414, No. 30-14415, and No. 30-14418
No. 30-14412No. 30-14415
No. 30-14416
No. 30-14411
No. 30-14418
No. 30-14414
No. 30-14411
No. 30-14418
PUSH BUTTON KEY SWITCHSPECIFICATIONS:
Part No.30-14420
ActuatorSquare Black
TypeSPST
Action(ON)-OFF
Current Rating: 10mA @ 35V DCStroke: 0.8mmOperating Force: 130 + 30 gf.Terminal Type: PCB Mount
NOTE: ( ) = Momentary
SPECIFICATIONS:
Part No.30-14419
ActuatorWhite Plastic
TypeSPST
Action(ON)-OFF
Current Rating: 50mA @ 24V ACInitial Contact Resistance: 20 Meg ohm Max (AC 12UV/5mA)Insulation Resistance: 100 Meg ohms. (Min.)Dielectric Strength: 250V/AC (Min.)Electrical Life: 200,000 OperationsShock Resistance: 30GTerminal Type: PCB Mount
NOTE: ( ) = Momentary
PUSH BUTTON KEYBOARD SWITCH
Part No. Actuator Color
30-14424 RED30-14425 WHITE30-14426 BLACK
SPST Momentary Printed CircuitPush Button Switch
Attractive, low profile SPST push-buttonswitches. A dull click provides tactile feed-back when contact has been made.
* Display pack of 2
Electrical Rating:RATING: 25MA @50VDCElectrical Life: 1million cycles typical. Insulation resistance: minimum of 1,000 megohms. Contact Resistance: 10m max @ 2-4VDC, 100mA. Dielectric strength: >1,000V rms @ sea level. Operating force:120+/-50 gf Housing: 6/6 Nylon. Cap: ABS or polycarbonate. Dome contact: gold over stainless. Terminals and contacts: Silver plated over copper alloy.
142
Current Rating: 5A @ 120V AC/28V DC, 2A @ 250V ACInitial Contact Resistance: 2-4V DC 1A 10m ohm Insulation Resistance: 1000 Meg ohm (Min.)Dielectric Strength: 1000V RMS @ Sea LevelContact Material: Coin Silver - Silver PlateTerminal Material: Brass - Silver PlateTerminal Type: Solder
NOTE: ( ) = Momentary
SPECIFICATIONS:
Part No.30-1001230-1001430-1001630-1001830-10020
30-090* -Terminal Connection
30-090*
ActuatorMetalMetalMetalMetalMetalMetal
TypeDPDTDPDTDPDTDPDTDPDTDPDT
ActionONONON
(ON)ONON
2-3, 5-62-3, 5-6
--
OFFOFFOFFON
Open2-3, 5-4
ON(ON)ON
(ON)(ON)ON
2-1, 5-4 2-1, 5-4
SUB-MINIATURE TOGGLE SWITCHES - SPST & SPDT
SUB-MINIATURE TOGGLE SWITCHES - DPDT
MINIATURE TOGGLE SWITCHES - SPST & SPDT
MINIATURE TOGGLE SWITCHES - DPDT
Mounting Hole: 0.203”
*
Current Rating: 3A @ 120V AC, 28V DCInitial Contact Resistance: 2-4V DC 1A 10m ohm Insulation Resistance: 1000 Meg ohm (Min.)Dielectric Strength: 1000V RMS @ Sea LevelContact Material: Coin Silver - Silver PlateTerminal Material: Brass - Silver PlateTerminal Type: Solder
NOTE: ( ) = Momentary
Part No.30-1003030-1004230-1004430-10046Terminal Connection
ActuatorMetalMetalMetalMetal
TypeSPSTSPDTSPDTSPDT
ActionONONONON2-3
--
OFF-
Open
OFFONON
(ON)2-1
Current Rating: 3A @ 120V AC, 28V DCInitial Contact Resistance: 2-4V DC 1A 10m ohm Insulation Resistance: 1000 Meg ohm (Min.)Dielectric Strength: 1000V RMS @ Sea LevelContact Material: Coin Silver - Silver PlateTerminal Material: Brass - Silver PlateTerminal Type: Solder
NOTE: ( ) = Momentary
SPECIFICATIONS:
Part No.30-1004830-1005030-10052Terminal Connection
ActuatorMetalMetalMetal
TypeDPDTDPDTDPDT
ActionONONON
2-3, 5-6
-OFF
-Open
ONON
(ON)2-1, 5-4
Current Rating: 5A @ 120V AC/28V DC, 2A @ 250V ACInitial Contact Resistance: 2-4V DC 1A 10m ohm Insulation Resistance: 1000 Meg ohm (Min.)Dielectric Strength: 1000V RMS @ Sea LevelContact Material: Coin Silver - Silver PlateTerminal Material: Brass - Silver PlateTerminal Type: Solder
NOTE: ( ) = Momentary
SPECIFICATIONS:
Part No.30-1000230-1000430-1000630-1000730-1000830-10010Terminal Connection
ActuatorMetalMetalMetalMetalMetalMetal
TypeSPDTSPDTSPDTSPSTSPDTSPDT
ActionONONONON
(ON)ON2-3
--
OFF-
OFFOFFOpen
ON(ON)ONOFF(ON)(ON)2-1
SPECIFICATIONS:
SWITCHES SUB-MINIATURE & MINIATURE TOGGLE
143
SWITCHES MINIATURE & TOGGLE
MINIATURE TOGGLE SWITCHES - 3PDT
MINIATURE TOGGLE SWITCHES - 4PDT
SPST & SPDT STANDARD SIZE TOGGLE SWITCHES
DPST & DPDT STANDARD SIZE TOGGLE SWITCHES
Current Rating: 5A @ 120V AC/28V DC, 2A @ 250V ACInitial Contact Resistance: 2-4V DC 1A 10m ohm Insulation Resistance: 1000 Meg ohm (Min.)Dielectric Strength: 1000V RMS @ Sea LevelContact Material: Coin Silver - Silver PlateTerminal Material: Brass - Silver PlateTerminal Type: Solder
NOTE: ( ) = Momentary
SPECIFICATIONS:
Part No.30-1002230-1002430-1002630-10028
Terminal Connection
ActuatorMetalMetalMetalMetal
Type3PDT3PDT3PDT3PDT
ActionONON
(ON)ON
2-3, 5-6,8-9
-OFFOFFOFF
Open
ONON
(ON)(ON)
2-1, 5-4,8-7
Current Rating: 5A @ 120V AC/28V DC, 2A @ 250V ACInitial Contact Resistance: 2-4V DC 1A 10m ohm Insulation Resistance: 1000 Meg ohm (Min.)Dielectric Strength: 1000V RMS @ Sea LevelContact Material: Coin Silver - Silver PlateTerminal Material: Brass - Silver PlateTerminal Type: Solder
Mounting Hole: 0.500”
Screw Terminal
SolderTerminal
Screw Terminal
SolderTerminal
Mounting Hole: 0.500”
SPECIFICATIONS:
Part No.30-1003230-10034
Terminal Connection
ActuatorMetalMetal
Type4PDT4PDT
ActionONON
2-3, 5-6,8-9,11-21
OFF-
Open
ONON
2-1, 5-4,8-7, 11-10
Current Rating: 15A @ 125/250V ACInitial Contact Resistance: 50 Meg ohm Insulation Resistance: 100 Meg ohm (Min.) @ 500V DCDielectric Strength: 1000V AC 50/60 Hz for 1 minuteContact Material: Brass - Nickel PlatedTerminal Material: Brass - Nickel PlatedActuator Type: Metal
SPECIFICATIONS:
Part No.30-110030-110430-111030-111430-112030-1124
TerminalSolderScrewSolderScrewSolderScrew
TypeSPSTSPSTSPDTSPDTSPDTSPDT
ActionONONONONONON
----
OFFOFF
OFFOFFONONONON
Current Rating: 15A @ 125/250V ACInitial Contact Resistance: 50 Meg ohm (Max.)Insulation Resistance: 100 Meg ohm (Min.) @ 500V DCDielectric Strength: 1000V AC 50/60 Hz for 1 minuteContact Material: Brass - Nickel PlatedTerminal Material: Brass - Nickel PlatedActuator Type: Metal
SPECIFICATIONS:
Part No.30-113030-113430-114030-114430-115030-1154
TerminalSolderScrewSolderScrewSolderScrew
TypeDPSTDPSTDPDTDPDTDPDTDPDT
ActionONONONONONON
----
OFFOFF
OFFOFFONONONON
Mounting Hole: 0.250”
Mounting Hole: 0.250”
144
SWITCHES STANDARD TOGGLE
STANDARD SIZE BAT HANDLE TOGGLE SWITCHES
STANDARD SIZE BAT HANDLE TOGGLE SWITCH
Part No.30-21930-221Bushing .472 OD
TypeSPSTDPDT
DepthA B C D E1”
1-5/32”1-21/32”1-13/16”
9/16”22/32”
13/32”13/32”
1/2”1/2”
9/16”11/16”
Mounting Hole: 0.500”
Mounting Hole: 0.500”
STANDARD SIZE BAT HANDLE TOGGLE SWITCHES
Mounting Hole: 0.500”
STANDARD SIZE BAT HANDLE TOGGLE SWITCHES
Mounting Hole: 0.500”
Current Rating: 3A @ 125V AC, 1A @ 250V ACInitial Contact Resistance: 5 Meg ohm (Max.)Insulation Resistance: 100 Meg ohm (Min.) @ 500V DCDielectric Strength: 1000V AC 50/60 Hz for 1 minuteContact Material: Brass - Nickel PlateTerminal Material: Brass - Nickel PlateTerminal Type: Solder
SPECIFICATIONS:
Part No.30-21930-221
ActuatorMetalMetal
TypeSPSTDPDT
ActionONON
--
OFFON
Current Rating: 6A @125V AC, 3A @ 250V ACInitial Contact Resistance: 5 Meg ohm (Max.)Insulation Resistance: 100 Meg ohm (Min.) @500V DCDielectric Strength: 1000V AC 50/60 Hz for 1 minuteContact Material: Brass - Nickel PlateTerminal Material: Brass - Nickel PlateTerminal Type: Screw
SPECIFICATIONS:
Part No.30-226
ActuatorMetal
TypeDPDT
ActionON OFF ON
Current Rating: 10A @125V AC, 6A @ 250V ACInitial Contact Resistance: 50 Meg ohm (Max.)Insulation Resistance: DC 500V 100 Meg ohm (Min.) Dielectric Strength: AC 1500V 1 minuteBushing Material: Brass - Nickel Plate,M12-.75 ThreadsTerminal Material: Brass - Nickel PlateTerminal Type: Screw
SPECIFICATIONS:
Part No.30-1012430-10126*
ActuatorBrass Nickel PlateBrass Nickel Plate
TypeSPDTSPDT
ActionONON
--
ONON
Current Rating: 15A @125V AC, 10A @ 250V ACInitial Contact Resistance: 50 Meg ohm (Max.)Insulation Resistance: DC 500V 100 Meg ohm (Min.) Dielectric Strength: AC 1500V 1 minuteBushing Material: Brass - Nickel Plate,M12-.75 ThreadsTerminal Material: Brass - Nickel PlateActuator Type: Metal (Brass Nickel Plate)
SPECIFICATIONS:
Part No.30-1009930-10351
TerminalSolderScrew
TypeSPDTSPDT
Action(ON)(ON)
OFFOFF
(ON)(ON)
NOTE: ( ) = Momentary
(* 30-10126 has .250” Quick connect terminal.)