Phoenix Thermal Electric Presents the Greenest, Highest Efficiency Electrical Power In the World

Phoenix Thermo Electric USA LLCPresents the Greenest, Highest Efficiency Electrical Power In the World Phoenix Thermo Electric

Solid State Generator

Phoenix Thermo Electric USA LLC

Power generation by alternative technologies in recent decades it has held a leading role in the economic, political and social environment. Having a clean energy production has been a priority for many governments, even though till now, there is not an alternative technology in the market which can be profitable enough to implement massive productions without requiring a government subside .Introduction

WINDPOWERSOLAR THERMALTIDAL POWERPHOTOVOLTAICS

GEO THERMO ELECTRICPhoenix Thermo Electric USA LLC

Phoenix Thermo Electric USA LLC

After 25 years of continuous research Phoenix Thermo Electric has developed a Solid-state electrical generator, whose technology can achieve an efficiency and profitability exceeding any current scheme electric energy production by alternative means.

The Solid State Electric Generator has no moving parts except a small fan that distributes heat flow on a set of thermal electric exchangers. This generator is also a multiple choice generator, in reference to a heat source power generation, this mean it can use any heat source as Thermo Solar Energy, , thermal energy or any combustible to generate heat as Natural Gas, Carbon, bio-fuels, Diesel, etc.

Introduction

The Thermoelectric technology based on the principle of heat exchange to generate electricity it is not a new concept in the market, however no other recently technological innovations of electricity generation fields have created a cost-effective option for alternative mass generation of electricity, that needs no government subsides.Phoenix Thermo Electric USA LLC

Phoenix Thermo Electric USA uses the Seebeck principle - Horton effect have achieved the Solid State Electric Generator development by using metal heat exchangers made of alloys that have been optimized over 25 years of research. Those optimized alloys in combination with the arrangement and circular configuration thereof, allows to generate energy in quantities never before achieved under this principle with high efficiency.

Cold AreaHeat AreaCrystallized Metal platesThermo ElectricGenerator single elementThermo Electric GeneratorElements Series Connected 123Thermo Electric Generator Elements In double connectionSeries and circular circuitPhoenix Thermo Electric USA LLC

Horton EngineHeat and Current Flow DiagramTitanium rod for air circulator penetrates hereCoolingCoolingInsulated Barrier Termoelctric Wafers create Voltage here as heat moves upward across the heated transfer finsHot end of heat transfer finsHeating14,000 Amp Current FlowTensioned Metal BindingFan ( Not Shown)Heat and Current Flow Diagram

Control ModuleThermoElectric GeneratorElectrical OutputInsulation LayerHeated MatrixWith Air GapsHeating CoilElectrical InputClosed System:Energy Stored in Matrix as heat.Heat drawn up as superheated air.Creates a heat Flow through solid state generatorAnd is pushed back into storage matrix.Grid-Matched AC or DC current output from Control ModuleHeat StoreHeat Store MechanicsHeat Store Mechanics

PTE SOLAR ENERGY SYSTEM

CONVENTIONAL SOLAR ENERGY

Current Solar Thermo Technologies, harness energy from the sun by reflecting concentrators sunlight captured (from all angles), to a central tube containing water, which later pushes that heated steam from a turbine to generate electricity. This process involves the need for a large amount of solar energy to produce the necessary steam pressure in order to achieve the trigger pulse for the power generating turbine.

The turbine requires special facilities and has a high maintenance cost. The vapor transport facilities require high maintenance: NOTE : Phoenix Technology does not use this principles.

This technology only woks when there is sun

P T E TECHNOLOGICAL INNOVATIONS

Within the field of Solar Thermo Power Generation Phoenix Thermo Electric has developed four major technological advances to set a difference with current alternative Power Generating technologies, those allow us to produce more electricity at lower cost:

1. - The tube where the solar energy is reflected does not contains water, it only carries heated air which will provide the necessary heat source for power generation.

2. The Electric Power Generation is performed based on thermal exchange between the generator materials, which means that there is no needs of large amounts of energy to produce electricity, as the one needed to move a turbine. In addition to the previous the energy production is enhancing by the circular arrangement and double connection (Series and Circular). 3. - Introduction of the concept of heat storage, allowing it to maintain continuous and total electricity production capacity for a minimum period of three days, even when there is no sun.

4 PTE technology is multimodal or multiple as to the heat source used for power generation, it can be used interchangeably solar energy, natural gas, LPG, coal etc. Either individually or any combination thereof.

Advantages of Phoenix Thermo Electric

Compared to any alternative technology and even with conventional PTE Generator System have a lower cost and faster implementing time.

The power energy produced by Phoenix Solid State Generator is significantly less expensive than any alternative means, up to the point where it can compete with the conventional energy production systems without requiring government subsidies to be profitable.

Energy Production Plants developed by Phoenix Thermo Electric USA are modular and can be adapted from 1 MW to the extent necessary for production according to the needs or requirements of energy delivery.

PTE Generators have a low maintenance cost

Generator life is longer than the any other technologyPTE TECHNOLOGY ADVANTAGES AND BENEFITS

Continue Electricity Production, supported by the heat storage.

Multi option heat resource, it is not limited.

Populations can be electrified easily without long transmission lines and without great voltage drops

The electricity generated can be 100% clean Green energy.

Does not require large civil works adapted for operation.

Phoenix Thermo Electric USA LLCPTE TECHNOLOGY ADVANTAGES AND BENEFITS

Phoenix Thermo Electric vs. Wind PowerCost of Equipment:Wind Power $1.75 per Watt forPTE Power $1.50 per Watt

% Efficiency:Wind Power 30 %PTE Power 80 %

Phoenix Thermo Electric vs. Natural Gas Burning GenerationCost of Equipment:Natural Gas Generator $2.75 per WattPTE Power $1.50 per Watt

% Efficiency:Natural Gas Power 50 to 60 %PTE Power 80 %

Phoenix Thermo Electric vs. Solar PowerCost of Equipment:Solar Panels Power $6.25 per Watt PTE Power $1.50 per Watt

% Efficiency:Solar Power 14 to 22 % PTE Power 80 %

Phoenix Thermo Electric vs. Steam PowerCost of Equipment:Steam Power $1.88 per Watt PTE Power $1.50 per Watt

% Efficiency:Steam Power 41.97 %PTE Power 80 %

Phoenix Thermo Electric LLCPTE Power:

To Produce Mega Watt PTE needs 1.2 acres of land Tested by the US Armys Fort Monmouth Laboratory in New Jersey, based on their findings, a large government contract will be awarded to PTE for power supply for the defense department. Test results (unit will last for 50 years, reflector array for 20 years) If lost of sun due to cloud cover: first three days 100 %, day 4 - 95 %, day 5 - 90 %, day 6 85 %, day 7 80 %, day 8 75 %, day 9 70 %, day 10 65 %, day 11 60 %, day 12 55 %, day 13 50 %, and so on (5 % decrease per day). If the need for carbon fuel (natural gas) due to cloud cover cost would be 2 to 3 cents per kWH

O & M (Operations and Maintenance) Cost is 0.00216 USD per Kwh

In case the plant produce electricity using only gas as heat resource, the generator requires 896,000 Btu-hours or 262,709 Watt-hrs of heat to make one MW-hr of electricity for an hour In distance less than mile it is not necessary for a transformer to deliver the energy to the distribution network.

Phoenix Thermo Electric LLC