phono preamplifier - evanta · 2013. 12. 25. · phono preamplifier musically, the koru is more...
TRANSCRIPT
The heart of musicwww.pliniusaudio.com
KORUPhono Preamplifier
Musically, the Koru is more revealing – details and images seem to fl oat and the depth and ambient retrieval is a revelation.
The Plinius Koru Phono Preamplifi er is built in the traditional inspired curved chassis, with a slight twist. The chassis is actually two in one, allowing physical separation of the power supply from the amplifi cation circuitry.
The power supply has received very detailed attention and boasts a virtual battery approach with over 100,000 micro Farads of
capacitance and very sophisticated 2 stage regulation. This ensures the lowest impedance and consequently extreme accuracy of power delivery to the amplifi cation stages.
The amplifi cation and equilisation circuitry is specifi c to the Koru and uses the latest components ensuring accuracy and longevity. Low output moving coil cartridges as well as higher output moving
magnet types can be used and there is a full range of user adjustments available on the rear panel.
Both single ended and balanced output signals are catered for and with passive high frequency and active low frequency equilisation, the Plinius Koru Phono Preamplifi er will maintain stability and fi nesse under the most demanding conditions.
The heart of musicwww.pliniusaudio.com
KORUPhono Preamplifier
INPUTRCA Unbalanced
GAINUser adjustable, 50dB, 56dB, 60dB, 66dB
LOADUser adjustable, 47k ohms, 22k ohms, 1k ohms, 470 ohms, 220 ohms, 100 ohms, 47 ohms, 22 ohms
INPUT CAPACITANCEUser adjustable, 100pF, 570pF
FREQUENCY RESPONSE20Hz to 20kHz +/–0.2dBwithin RIAA spec
SIGNAL TO NOISE RATIO–80dB wrt 5 mV input, A weighted
DISTORTION<0.01% THD at all levels below clipping
OUTPUTSRCA UnbalancedXLR Balanced
POWER/CURRENT CONSUMPTION10VA0.03A (7W) Idle/Standby
PRODUCT FEATURESAvailable in black or silver
DIMENSIONSHeight: 80mm (3.5")Width: 450mm (17.75")Depth: 400mm (15.75")Weight: 5.5kg (12lbs)