pic engrave software manual

12
Tutorial for Version 5.0.x December 2014 Start PicEngrave Pro 5 and the following screen displays. Click on the button. 1

Upload: ricardo-mendonca

Post on 07-Nov-2015

32 views

Category:

Documents


4 download

DESCRIPTION

Manual and setup for the picengrave software

TRANSCRIPT

  • Tutorial for Version 5.0.xDecember 2014

    Start PicEngrave Pro 5 and the following screen displays.

    Click on the button.

    1

  • Click on the button to select an image.

    Select an image and click the button at the bottom of the file window.

    This screen then displays the image info and the size of the engraved image.

    2

  • Click on the button to review/change the program's parameter and option settings.

    After editing/reviewing programs settings, click the button to save your changes.

    Clicking the or button will allow setting youve changed to be used only for the current program run.

    Clicking either button returns to the previous screen.

    3

  • If you have selected the ellipse or crop options, a set of adjustment sliders will now appear below the image. Adjust these sliders to select the area of the image that will be used to generate a gcode file.

    Click on the button to proceed, and a button will appear.

    At this point, you can still select a different image, or change engraving parameters.

    To proceed with the current image, click the button.

    After a short time interval, a button will appear. Click it to proceed. You can then either enter a file name for the gcode file, or accept the default name.

    As the gcode file is saved, a series of colored lines will scroll down the image. Whencomplete, you can either PicEngrave Pro 5, or select another image to convert.

    4

  • Clicking the button opens a sub-program where you can select an image and change its properties or dither it before generating a gcode file. When finished editing, save the edited image to your computer, then exit and reopen the newly edited image in the main program.

    Text can be added to an image in another sub-program by clicking the button on the main starting screen.

    ----------------------------------------------------------------------------------------------

    This short tutorial covers the basic operation of PicEngrave Pro 5. Please don't hesitate to experiment. Use Mach3 (or whatever gcode preview software you prefer) to view your resultsbefore beginning actual engraving operations. Be sure to read the Instructions in the Help menu for additional information.

    5

  • Initial Program Settings

    Setting image engraving options and values is highly dependent upon each users cnc machine, operation, and material being engraved. The following screen shots can be used to initially setup PEP5 with conservative settings to produce gcode for each engraving mode. Asexperience is gained with the engraving mode selected, engraving options and values can be added or changed as desired.

    Spindle Engraving (wood)

    6

  • Spindle Engraving (lithophane)

    7

  • Laser Analog Engraving

    8

  • Laser TTL Engraving

    9

  • Laser VFR Engraving (wood)

    10

  • Laser VFR Engraving (mirrors)

    11

  • Laser Mach3 TTL Engraving

    PicEngrave Pro 5 is frequently updated and features are added as the author and users develop new methods of image engraving, especially using laser diodes. The version of PEP5 that is currently available may not exactly correspond to the screen images in this tutorial, but using this tutorial as a guide should help get you close. Please dont hesitate to contact us through our web site if you have questions not covered here or in the other usage documents supplied.

    Thank You,John Champlain and Jeff Woodcockwww.picengrave.comRevised December 2014

    12