picture/radius windows tuscany vinyl replacement window · (1-1/4” or 2” fin widths available)...

Picturewindow

Picture?windowgable

Picture?windowoctagon

Half-round Quarter?Round

Round?top/picture Round?top

Arch?top

Arch?top/picture

Full?round

– PICTURE WINDOW- Min 1616 Max 8060

– OCTAGON- Min 2020 Max 6060

– HALF ROUNDS- Min 2613 Max 8040

– QUARTER ROUNDS- Min 1313 Max 5050

– FULL ROUND- Min 2626 Max 5050

– ARCH TOPS- 48 square feet maximum

- Min 2626 Max 8060

- must specify leg height and center height(minimum 6” leg height)

NOTE: For engineering approval contact your Milgard representative for anyconfiguration over 40 square feet. Each Milgard Manufacturing plant reservesthe right to alter or change sizes and configurations according to locationcapabilities. Ask your Milgard rep about specialty applications.

Windows over 40 square feet shipped open for field glazing.Varies by location.

8320T-1NOVEMBER 2008

Picture/Radius WindowsTuscany™ Vinyl Replacement Window

Tuscany is designed for replacement applicationsand it is available in multiple frame styles includ-ing nail-on fin frame, the series is appropriate fornew construction.

The Tuscany series vinyl Picture/Radius windowoffers the outstanding insulating properties, lowmaintenance, and contemporary aesthetic appealonly vinyl can provide. Available in white or tanhomogenous window frames, Tuscany’s durablevinyl exterior will never need painting. The windows will maintain their color and shape andcan be constructed to your exact size specifications,subject to engineering review. All Milgard win-dows are made to order at no additional charge.

Like all Milgard windows, patio doors and skylights, the Tuscany series has a Full LifetimeWarranty to the original single family homeownercovering both materials and labor. The Tuscanyseries also carries a lifetime glass breakage warran-ty. The Milgard Full Lifetime Warranty is fullytransferable unlimited up to 10 years. For moreinformation, locate our simple one-page warrantyon milgard.com.

Commercial, apartment, multi-family, and co-housing projects are covered by a 10-year warranty from date of manufacture, covering allmaterials and labor, including the glazing unit.

8320T-2 NOVEMBER 2008


CONFIGURATIONS

Milgard’s Tuscany Series Picture Windows can be combined with eachother or other Milgard vinyl windows to create almost any configurationyou can envision. Milgard Picture Windows are available in custom sizesto match almost any design.

All windows over 40 square feet (location specific) are shipped open(may require multi-lite) and will require field glazing.

Milgard’s Tuscany Series Radius Windows can be combined witheach other or other Milgard vinyl windows to create almost anyconfiguration you can envision. Milgard Picture Windows are avail-able in round tops, half rounds, quarter rounds and full rounds incustom sizes to match any design.

COMPONENTS

FRAMETuscany is available in a variety of frame and trim choices. The 3-1/4” deep nail on frame is ideal for both New Construction andReplacement installations. We offer a standard nail fin frame for NewConstruction, a Block frame with no fins for insert Replacement andtwo different Z bar flange options, welded into the frame, for stuccoexterior Replacement applications. Frame components are made of ahigh performance uPVC, rigid polyvinyl chloride material, custom com-pounded for superior impact resistance, color retention and weatherresistance. The frame and sash corners are all precision mitered andfusion welded for a lifetime of air and water resistance.

The Tuscany product line meets or exceeds the AAMA/WDMA/CSA101/I.S.2/A 440-05 Industry Specification for Windows and Doors. Theyare also tested for Forced Entry Resistance to the ASTM F588-97 stan-dard, Grade 20 level. Each window is labeled with the NFRC Energy Starperformance information, based on the type of glazing you select.

AVAILABLE FRAME STYLES*

NO NAIL-ON FIN (TUSCANY HORIZONTAL SLIDING WINDOW FRAME):8320T Block Frame8370T 1-5/8” Narrow Z-Bar8340T 2-1/8” Wide Z-Bar

INCLUDES NAIL-ON FIN:8320T 1-3/8” Nail Fin Setback8330T 1” Nail Fin Setback with Stucco Key

8340T 1-3/8” Nail Fin Setback, 2” Long Nail Fin8340T 1-3/8” Nail Fin Setback, 2” Long Nail Fin with Optional:

3/4” Flat J-Channel1” Contoured J-Channel2” Brickmold-style J-Channel

*Not all frame styles available at all Milgard locations.Contact your sales representative for more information.

BLOCK FRAMEThe block frame style is a window frame profile without a nail fin.The block frame allows an installer to insert the replacement win-dow into the existing frame, without disturbing the home’s internalor external wall surfaces. Installation method includes carefullydrilling through the jamb.

Z-BAR (STANDARD AND WIDE)Two extruded Z-bar frame choices are available with Tuscany™ series,standard (1-5/8”) and wide (2-1/8”). Z-bar installation, the method ofremoving the aluminum or steel sash but leaving the frame in place, isideal with aluminum retrofit in stucco applications and can save a sig-nificant amount on installation costs.

NAIL-ON FIN(1-1/4” OR 2” FIN WIDTHS AVAILABLE)A pre-punched nail flange extends around the perimeter frame,securing the window in rough openings and acting as a part of theflashing system.

FIN SETBACKS ARE AVAILABLE IN:1-3/8” nail fin setback (1-1/4” or 2” pre-punched nail flange)1” nail fin setback with stucco key (1-1/4” pre-punched nail flange)

The 2” pre-punched nail flange frame also has an exterior accessorygroove which allows for optional J-channel trim:

2” Brickmold1” Contour3/4” Flat

The 2” brickmold is applied in the field on the window, and snappedin-place after window installation. The 1” contour and 3/4” flat J-Channel options are welded in place at the factory. All trim optionsare extruded by Milgard and are available in white and tan.

WEEP SYSTEMHollow sill construction and offset weep baffles release any accumu-lated moisture from the sill pockets and help prevent blow back,and helps control the water flow caused by a combination of windand rain.

GLAZING MATERIALAAMA-approved glazing tape adheres glass to the fixed and ventpanel frames which seals and cushions the glass. Rigid vinyl settingblocks are used to support the unit above the sill, preventing glassshear (glass in the insulted unit becomes offset). Extruded vinyl glaz-ing (snap-in) bead is applied around the interior edge.

“Interior glazing” makes replacement of glazing unit convenient;



bead is mitered at 45 degree for a finished look. Insulating dualglazed panes has a 7/8'” overall glass thickness, are dual seal equiva-lent, sealed for optimal energy efficiency. All Tuscany™ windowscurrently meet or exceed EnergyStar® performance in all climatezones with a 0.35 u-factor or lower. Specialty glass options are avail-able upon request which can help achieve as much as a 26%improvement in u-factor.

Specialty glass options for privacy, noise abatement and aesthetics areavailable upon request.

SCREENMilgard's exclusive PureView™ screen frames are cambered alu-minum, assembled with rigid nylon corner clips. Rolled pull rail pro-vides simple installation and removal. Screens come standard withmatching frame color. PureView's innovative screen uses smallerdiameter yarn, improving the interior view. The finer mesh alsoreduces the appearance of a screen, enhancing curb appeal.PureView's fiberglass charcoal screen mesh is strong, durable andeasy to replace. All screens are under one year warranty.

ENERGY PACKAGESMilgard offers two energy efficiency upgrade packages that offerincreased U-Value performance. 3D™ and 3D MAX™ use the ENER-GY STAR® criteria from each climate zone and utilize materials thatare tailored to each individual climate to increase energy efficiency.The combination of the frame material, product design and glazingunit make up the 3 components of the energy packages. TheTuscany Series receives up to 23% increase in energy efficiency withthe 3D MAX package.

Note:• Packages available in most markets.

Please see your local sales representative for details.• 3D and 3D MAX energy packages are based on insulated glass units with

Single Strength (3/32") and Double Strength (1/8") glass. Some glass thickness-es and internal grid combinations may result in lower energy performance.

• 3D and 3D MAX energy packages are not included with the 8125 DoubleSlider, 5621WS Wide Stile Sliding Door, 8225 Double Hung when selectinggrids and are currently not available in breather tube applications.

OPTIONS

GRIDSAvailable in 5/8” flat or 1-1/16” sculptured aluminum profiles. Color-matched to frame. Simulated divided lite (SDL) grids are also availablein some locations, using 5/8” grids between the glass panes for three-dimensional shadowing as well as 7/8” contoured vinyl grid applied tothe interior and exterior glass panes.

All grids are color matched to frame in white or tan.

GLASSFull Lifetime Glass Breakage Warranty. For complete warranty details visit milgard.com.

TEST STANDARDSSee Test Reports/Energy Ratings section.

Caution: The use of petroleum based fuels or solvents as release agents instucco wall installations or glass cleaning will chemically attack materials usedin seals and other components, and voids the Milgard Warranty. The use of waxbased release agents is recommended.

Expanding foam for insulation purposes should not be used. Backer rod or loosepacked fiberglass bat insulation is recommended.


8320T-4 NOVEMBER 2008

Due to continual product research and development, details may be changed at any time. ©2008Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

8320T Assembly Drawing: 1-3/8 inch (35 mm) Nail Fin Setback


Horizontal View

Vertical View

8320T-6NOVEMBER 2008Due to continual product research and development, details may be changed at any time. ©2008

Products shown are not available at all locations – confirm availability with your local Milgard representative.

Scale: 6” = 1’ (1/2 scale)

8360T Assembly Drawing: Block Frame (No Nail Fin)

Horizontal View

Vertical View

8330T Assembly Drawing: 1 inch (25 mm) Nail Fin Setback with Stucco Key


Scale: 6” = 1’ (1/2 scale)8320T-7NOVEMBER 2008

Horizontal View

Vertical View



Scale: 6” = 1’ (1/2 scale)

8370T Assembly Drawing: 1-5/8 inch (41 mm) Narrow Z-Bar (No Nail-On Fin)

Horizontal View

Vertical View

8375T Assembly Drawing: 2-1/8 inch (54 mm) Wide Z-Bar (No Nail-On Fin)



Horizontal View



Scale: 6” = 1’ (1/2 scale)

8375T Assembly Drawing: 2-1/8 inch (54 mm) Wide Z-Bar (No Nail-On Fin)

Vertical View



8340T Assembly Drawing: 1-3/8 inch (35 mm) Nail Fin Setback, 2 inch (51 mm) Long Nail Fin

Horizontal View

Vertical View



Scale: 6” = 1’ (1/2 scale)

8340T Assembly Drawing: 1-3/8 inch (35 mm) Nail Fin Setback, 2 inch (51 mm) Long Nail Fin withOptional 3/4 inch (19 mm) Flat J-channel

Horizontal View

Vertical View



8340T Assembly Drawing: 1-3/8 inch (35 mm) Nail Fin Setback, 2” (51 mm) Long Nail Fin withOptional 1" (25 mm) Contoured J-Channel

Horizontal View

Vertical View

8340T Assembly Drawing: 1-3/8” (35 mm) Nail Fin Setback, 2” (51 mm) Long Nail Fin withOptional 2" (51 mm) Brickmold-style J-Channel



Scale: 6” = 1’ (1/2 scale)

Horizontal View

8340T Assembly Drawing: 1-3/8” (35 mm) Nail Fin Setback, 2” (51 mm) Long Nail Fin withOptional 2" (51 mm) Brickmold-style J-Channel



Vertical View

picture/radius windows tuscany vinyl replacement window · (1-1/4” or 2” fin widths available)...

Documents