pigs prices

Prices Effective Feb 1, 2001

Model Description Weight Size PriceModel 2 Pig Tracking System 22 lb 1.5 cu ft 5,055.00 Model 4 Pig Tracking System 26 lb 2.2 cu ft 6,355.00 Model 12 Pig Tracking System 33 lb 2.2 cu ft 7,645.00 PT-107 Pig Transmitter, unit only, 60 hr 2 - 4" lines 2.5 lb 0.3 cu ft 1,410.00 PT-275 Pig Transmitter, unit only, 200 hr 4" and up 6.5 lb 0.3 cu ft 2,635.00 PT-750 Pig Transmitter, unit only, 500 hr 12" and up 13.5 lb 0.3 cu ft 3,935.00 PTR Pig Tracker Receiver & Wand 7 lb 0.4 cu ft 3,713.00 PTS Pig Tracker Sensor 3 lb 0.3 cu ft 625.00 PTSI Pig Tracker Sensor Indicator Unit 3 lb 0.3 cu ft 260.00 PTSB Pig Tracker Sensor Battery Unit 3 lb 0.3 cu ft 270.00 1. All Pig Tracker System sales include: one transmitter (PT -107 for Model 2; PT-275 for Model 4; PT-750 for Model 12), one receiver (PTR), one pick -up wand, batteries, operating instructions and shipping/carrying case. 2. All shipping weights and dimensions shown are for complete systems with components, as described above.3. All items have a three month warranty on materials & workmanship except for the Model PTR which has a twelve month warranty.

Model Daily MinimumModel 2 102.00 408.00Model 4 116.00 464.00Model 12 124.00 496.00PTR (with wand) 63.50 254.00PT-107 38.00 152.00PT-275 51.50 206.00PT-750 62.50 250.00Underwater Wand (100, 250 or 500 ft) 32.50 130.001. All Pig Tracker rental systems include: one transmitter (PT -107 for Model 2, PT-275 for Model 4, PT-750 for Model 12), two PTR receivers, two pick -up wands, batteries, operating instructions and shipping/carrying case. Mounting plate for mounting transmitter to steel mandrel pig is included upon request. One set 2 inch or 3-4 inch wear ring spacers included with each PT-107(customer to specify pipe diameter). Note: Any items lost, stolen or damaged beyond normal wear and tear, will be invoiced at the list price. 2. All Pig Tracker rental equipment will have a four (4) day minimum rental period. All systems will be shipped from the factory via Next Day Service (ie, UPS Next Day, FedEx Next Day, DHL Next Day) and the return of equipment will be via the same type of service. Rental period begins the date equipment is shipped and stops the day equipment is received at the factory. There will be no exceptions! Based on present shipping rates, UPS Next Day to either coast, from the factory (Houston), the shipping fee would be approximately $150.00 with insurance.

Model PriceModel 2 9,295.00 ($3,069.00 per month for 2 months with balance of $3,157.00 on 3rd month) Model 4 10,590.00 ($3,400.00 per month for 2 months with balance of $3,790.00 on 3rd month) Model 12 11,825.00 ($3,730.00 per month for 2 months with balance of $4,365.00 on 3rd month) 1. All rental purchases are furnished with equipment as stated in Rental price section except all equipment will be reconditioned and thoroughly inspected and tested. 2. Rental purchase must be specified at time of order or prior to shipment. No exceptions will be made.3. All freight charges, additional components and other special charges will be invoiced on the first month invoice.

All prices shown are U.S. Dollars ($), f.o.b. factory. All prices are subject to change without notice.

Pig Trackers,SalesPig Trackers,Sales

Pig Trackers,RentalsPig Trackers,Rentals -available only in the USA

Pig Trackers,Rentals PurchasesPig Trackers,Rentals Purchases-available only in the USA

PIPELINE INSPECTION COMPANY, LTD.P.O. Box 55648 • Houston, Texas 77255-5648PH: (713) 681-5837 • FAX: (713) 681-4838

12063 Pick-up wand, waterproof, Pig Receiver, with 500 ft cable 35.5 lb 930.00 12726 Shipping/Carrying case for Model 2, 4, 12 system 11.5 lb 390.00 11335 Battery, 3v lithium 0.2 lb 16.00 10787 Battery, 9 volt alkaline 0.2 lb 6.10 10785 Battery, "AA" alkaline 0.2 lb 2.95 10779 Battery, "C" alkaline 0.2 lb 3.60 11374 Mounting plate, for PT-750 to mandrel pig 1 lb 95.00 PT-107 -O "O" Ring set, for PT-107 0.1 lb 4.75 PT-275 -O "O" Ring set, for PT-275 0.1 lb 7.00 PT-750 -O "O" Ring set, for PT-750 0.1 lb 7.00 10187 PTR strap 0.2 lb 26.00 11902 Wrench (for transmitter end caps for 275/750) 0.2 lb 8.50 11516 Cup mounting kit for PT -275 1.2 lb 255.00

Model Description Weight Price12060 Pick-up wand, Pig Receiver 3 lb 255.00 12061 Pick-up wand, waterproof, Pig Receiver, with 100 ft cable 15 lb 420.00 12062 Pick-up wand, waterproof, Pig Receiver, with 250 ft cable 20 lb 695.00

Pig Trackers Replacement PartsPig Trackers Replacement Parts

Prices Effective Feb 1, 2001PIPELINE INSPECTION COMPANY, LTD.P.O. Box 55648 • Houston, Texas 77255-5648PH: (713) 681-5837 • FAX: (713) 681-4838

Model Description Weight Dimension Price715 Portable "stick" type detector 35 lb 2.2 cu ft 3,125.00 715 Portable "stick" type detector, unit only 5 lb 0.5 cu ft 2,490.00 725 Portable "stick" type detector 35 lb 2.2 cu ft 3,125.00 725 Portable "stick" type detector, unit only 5 lb 0.5 cu ft 2,490.00 735 Portable "stick" type detector 35 lb 2.2 cu ft 3,240.00 735 Portable "stick" type detector, unit only 5 lb 0.5 cu ft 2,620.00 915 Portable "shoulder" type detector 35 lb 2.2 cu ft 3,125.00 915 Portable "shoulder" type detector, unit only 5 lb 0.5 cu ft 2,490.00 925 Portable "shoulder" type detector 35 lb 2.2 cu ft 3,125.00 925 Portable "shoulder" type detector, unit only 5 lb 0.5 cu ft 2,490.00 670 Portable "wet-sponge" type detector 3 lb 1.0 cu ft 299.00 670 Portable "wet-sponge" type detector, unit only 2 lb 1.0 cu ft 280.00 673 Stationary "wet-sponge" type detector 6 lb 0.9 cu ft 850.00 115 Stationary "plant" type detector 70 lb 3.0 cu ft 3,225.00 125 Stationary "plant" type detector 70 lb 3.0 cu ft 3,225.00 JM Bench/Field Crest Voltmeter (Pulse/DC input) 9.2 lb 0.9 cu ft 895.00 PJM Pocket Crest Voltmeter (Pulse input) 2.2 lb 0.3 cu ft 425.00 DCPJM D.C. Pocket Crest Voltmeter (DC input) 2 lb 0.3 cu ft 245.00

MSRBMulti-station Rebar System - 3 channel standard 1,380.00

Each additional channel (up to 6 channels per unit) 380.00 RBRS Rebar Roller System - 3 station standard 1,950.00

Each additional station 620.00 FF Pearson type detector, Fault Finder 80 lb 2.2 cu ft 2,425.00 FFT Fault Finder Transmitter, unit only 5.5 lb 0.3 cu ft 1,100.00 FFR Fault Finder Receiver, unit only 1.5 lb 0.1 cu ft 1,100.00 1. All sale detectors (portable) are furnished complete with: two batteries, battery box, battery charger (120/240 VAC), electrode wand, ground cable, carrying/shipping case and operating instructions.2. All sale Model 115 and Model 125-DC detectors are furnished complete with: one Klaxon horn, one spring (or brush) electrode wand with 20 ft. high voltage cable.3. Electrodes furnished separately at an additional charge, see separate electrode price sheets for prices and available sizes. 4. All items marked as "unit only" are furnished as described and shipped in a cardboard box, unless a shipping/carrying case otherwise ordered. Note: Any Model 7xx & 9xx "unit only" is shipped with a battery box.5. Model 670 includes battery, ground cable and flat sponge electrode. The roller electrode may be purchased optionally.6. The Multi -station systems require custom manufacture, therefore, adjustments to prices may be necessary. As with all custom manufactured items, time required to manufacture can vary so allow adequate time for this process.7. All items have a three month warranty on materials & workmanship except for Models 715, 725, 735, 915, 925 and JM which have a twelve month warranty.

Holiday Detectors, SalesHoliday Detectors, Sales

Holiday Detectors, RentalsHoliday Detectors, Rentals-available only in the USA

Holiday Detectors, Rental PurchaseHoliday Detectors, Rental Purchase-available only in the USA

1. All rental detectors (portable) are furnished with used equipment consisting of: two batteries, battery box, battery charger, electrode wand, ground cable, shipping/carrying case and operating instructions. See separate electrode price sheets for prices and available sizes. Note: Any items damaged beyond normal wear and tear, or lost/stolen, will be invoiced at the full sale price.2. All rental equipment will have a four day minimum rental period. Rental begins the date equipment is shipped and stops the day equipment is received at factory. Normal shipment is by UPS Red (or equivalent) unless otherwise specified.

Model Price715, 725, 915, 925, 115, 125 3,435.00

($702.50 per month for 4 months with balance of $625.00 on 5th month)735 3,545.00

($702.50 per month for 4 months with balance of $735.00 on 5th month)1. All rental purchases are furnished with equipment as stated in Rental price section except that equipment will be reconditioned equipment that has been thoroughly inspected and tested.2. All freight charges, additional components (electrodes, etc.) and other special charges will be invoiced on the first month invoice.

Model Daily Minimum715, 725, 735, 915, 925, 115, 125 $24.00 $96.00 JM, FF $21.00 $84.00


Part No. Description Weight Price10904 Baseplate, Model 715/725/735 1 lb 178.00 10630 Battery, RP6801, sealed rechargeable, dry, non-restricted 4.5 lb 80.00 10614 Battery, 67 1/2 volt 1 lb 55.00 10787 Battery, 9 volt alkaline 0.1 lb 6.10 11679 Battery Box (7x5 & 9x5) 1 lb 51.50 10944 Board, PC, Main, Model 715 2 lb 1,625.00 10943 Board, PC, Main, Model 725 2 lb 1,625.00 12090 Board, PC, Main, Model 735 2 lb 1,625.00 12955 Board, PC, B+ Power Supply, Model 715/725 2 lb 600.00 12956 Board, PC, B+ Power Supply, Model 735 2 lb 600.00 11934 Brush adaptor kit 1 lb 13.00 11724 Case, Detector top, Model 7x5 1 lb 215.00 12059 Case, Detector top, Model 9x5 1 lb 215.00 11061 Charger, 120/240 VAC 2 lb 125.00 10775 Clip, large alligator 3 oz 6.50 12146 Cable, ground, assembly, for Jeepmeter series 0.1 lb 13.75 11063 Cable, ground, assembly, for 7xx series, 50 ft. 1.8 lb 51.00 11925 Cable, ground, assembly, for 7xx series, 100 ft. 2.2 lb 80.00 11050 Cable, ground, assembly, for 9xx series, 50 ft. 1.6 lb 51.25 11926 Cable, ground, assembly, for 9xx series, 100 ft. 2.2 lb 80.00 11927 Cable, ground, assembly, for 670, 25 ft. 0.1 lb 10.25 11928 Cable, High Voltage, for Jeepmeter series 0.1 lb 13.75 11930 Marker system, automatic 2.5 lb 498.00 11285 Power cord, 6 ft. 0.5 lb 11.00 11913 Rebar station sponge roller assembly ( single roller only) 3.0 lb 322.00 11914 { Rebar station sponge only } 0.1 lb 18.00 11915 { Rebar station mounting hardware } all contained in above part 0.3 lb 53.00 11533 { Rebar station mounting bracket } 2.6 lb 71.00 11083 Shipping/carrying case, for 7xx series 9.5 lb 292.00 11789 Shipping/carrying case, for 9xx series 9.5 lb 292.00 10623 Spring connector & swivel assembly 0.3 lb 43.25 11341 Spring, Leaf, for battery box 0.1 lb 7.75 11056 Strap, carrying, for 9xx series 0.5 lb 16.75

Model Daily Minimum715, 725, 735, 915, 925, 115, 125 $24.00 $96.00 JM, FF $21.00 $84.00

11907 Switch, On/Off, lighted. for 7xx series 0.2 lb 131.00 11740 Wand, brush electrode, flat sponge, for 670 series 0.5 lb 29.75 11912 {sponge brackets and hardware} 12.75 10254 { Wand only } all contained in above part 9.00 11322 { Sponge only } 8.25 11681 Wand, brush electrode, roller sponge, for 670 series 0.8 lb 53.75 11916 { Sponge axle & mounting hardware only } 10.25 11674 { Wand only } all contained in above part 7.90 11676 { Sponge only } 35.75 12727 Wand, brush electrode, for 1xx w/20 ft. H.V. cable 2.5 lb 77.00 11919 Wand, brush electrode, for 7xx series 1.3 lb 62.75 11920 Wand, brush electrode, for 9xx series 1.5 lb 80.00 11931 Wand, release assembly 0.1 lb 9.50 12769 Wand, spring electrode, for 1xx series w/20 ft. H.V. cable 2.5 lb 94.00 11932 Wand, spring electrode, for 7xx series 1 lb 99.50 11933 Wand, spring electrode, for 9xx series 1.5 lb 99.50 11935 Wand, dummy pusher 1 lb 66.00 11936 Wire, trolley assembly, for 1xx series complete w/hardware 4.5 lb 125.00 11937 Spare parts kit for Model 715/725/735 16 lb 450.00 11938 Spare parts kit for Model 915/925 16 lb 450.00

Each Spare parts kits consists of the following:2 ea Battery, RP68011 ea Battery box3 ea Ground cable, 50 ft.1 ea Wand, spring electrode

Holiday Detectors Replacement PartsHoliday Detectors Replacement Parts


11973 2" 1.5 lb 65.50 Part No. Description (Pipe Diameter) Weight PriceFlat Brass11974 12066 2" 0.5 lb 62.50 11975 12067 3" 0.5 lb 64.00 11976 12068 4" 0.5 lb 66.25 11977 12069 6" 0.5 lb 76.75 11978 12070 10" 1 lb 119.75 11979 12071 12" 1.5 lb 137.00 11980 12072 18" 2 lb 212.25 11981 12073 20" 2 lb 219.75 11982 12074 24" 2.5 lb 274.50 11983 12075 28" 3 lb 319.75 11984 12076 30" 3 lb 340.50 11985 12077 36" 3.5 lb 406.00 11331 Brass brush stock, bulk (per inch) 0.1 lb/in 12.00 /inFlat, Conductive Neoprene Rubber11987 6" 0.5 lb 43.41 11988 10" 1 lb 48.75 11989 12" 2 lb 54.00 11990 18" 2.5 lb 73.00 11991 24" 2.5 lb 97.25 11992 30" 3 lb 118.50 11993 36" 3 lb 136.25 11994 6" paddle 0.5 lb 46.00 11995 Conductive neoprene, bulk stock 9 lbs/sq yd 237.50 /sq ydHalf-Circle, Conductive Neoprene Rubber10985 2" 1 lb 94.50 10979 3" 1 lb 96.75 11998 4" 1.5 lb 100.00 11999 6" 1.5 lb 105.25 10981 8" 1.5 lb 109.25 12005 10" 2 lb 114.00 10977 12" 2 lb 122.00 12007 14" 2 lb 130.75 12008 16" 2.5 lb 137.00 12009 18" 3 lb 137.00 12010 20" 4 lb 143.25 12011 24" 4 lb 150.75 10976 26" 4 lb 169.00 12013 30" 4.5 lb 175.00 12014 36" 5 lb 200.00 12015 40" 6 lb 237.00 12016 42" 7 lb 261.00 12017 48" 8 lb 292.00 11995 Conductive neoprene, bulk stock 9 lbs/sq yd 237.50 /sq ydHalf Circle, steel brush12019 2" 0.8 lb 60.50 12020 3" 0.8 lb 64.00 12021 4" 1 lb 66.50

Part No. Description (Pipe Diameter) Weight PriceFull Circle Steel11970 1/2" 1 lb 58.00 11971 3/4" to 1" 1 lb 58.00 11972 1 1/4" to 1 1/2" 1 lb 62.75

Brush ElectrodesBrush Electrodes


10963 26" 4 lb 331.00 12034 30" 4.7 lb 368.00 10964 36" 5 lb 431.25 12036 40" 5.5 lb 465.75 12037 42" 6 lb 500.25 12038 48" 6.7 lb 529.00

12024 6" 1.3 lb 76.50 12025 8" 1.5 lb 100.00 12026 10" 2 lb 137.50 12027 12" 2 lb 168.00 10965 14" 2 lb 187.50 10966 16" 2.5 lb 206.00 10960 18" 3 lb 229.00 10961 20" 3.3 lb 268.00 12032 24" 4 lb 300.00

Brush ElectrodesBrush Electrodes-continued


Part No. Description (Pipe Diameter) Weight Price11018 2" ( 50 mm) 1 lb 53.50 11940 2.5" ( 53 mm) 1 lb 53.50 11013 3" ( 76 mm) 1.5 lb 57.25 11942 4" ( 101 mm) 1.5 lb 60.75 11943 6" ( 127 mm) 2.5 lb 66.75 10995 8" ( 203 mm) 3 lb 80.75 10993 10" ( 254 mm) 4 lb 87.75 10991 12" ( 305 mm) 4.5 lb 97.00 10989 14" ( 356 mm) 5 lb 101.50 10997 16" ( 406 mm) 5 lb 107.25 10999 18" ( 457 mm) 6 lb 117.25 11001 20" ( 508 mm) 6.5 lb 126.00 11003 22" ( 558 mm) 7 lb 128.00 11952 24" ( 610 mm) 7.5 lb 131.00 11005 26" ( 660 mm) 8 lb 132.50 11954 28" ( 711 mm) 8 lb 134.00 11007 30" ( 800 mm) 8.5 lb 137.00 11956 32" ( 813 mm) 9 lb 144.00 11009 36" ( 900 mm) 10 lb 155.75 11958 40" (1000 mm) 11 lb 167.00 11959 42" (1050 mm) 12 lb 179.50 11960 48" (1200 mm) 12.5 lb 185.00 11961 52" (1320 mm) 13 lb 191.50 11962 56" (1420 mm) 13.5 lb 197.50 11963 60" (1600 mm) 14 lb 203.00 11964 72" (1800 mm) 15 lb 215.75 11965 76" (1930 mm) 15 lb 228.50 11966 80" (2032 mm) 16 lb 270.75 10624 Spring Electrode, Bulk Stock (10 ft) 1.5 lb/ft 18.95 /ft11968 Spring End, assembly 0.25 lb/pr 40.50 /pr11969 Spring End, Interlocking 1.25 lb/pr 45.50 /pr

Spring Electrodes, Full CircleSpring Electrodes, Full Circle


12039 2" n/a 117.00 12040 3" n/a 141.50 12041 4" n/a 148.75 12042 6" n/a 190.00 12043 8" n/a 224.00 12044 10" n/a 248.50 12045 12" n/a 293.50 12046 14" n/a 304.50 12047 16" n/a 323.75 12048 18" n/a 352.50 12049 20" n/a 406.00 12050 24" n/a 670.00 12051 30" n/a 781.50 12052 36" n/a 956.50 12053 40" n/a 1,094.00 12054 48" n/a 1,181.50 This item is made of conductive neoprene circles sandwiched between aluminum disks. Two such plates, joined with spacers form a "PIG" type electrode for the inspection of internally coated pipes. With metallic spacers, there is a double signal at each holiday. If double signaling is not desired, please specify when placing order, that non-conductive spacers be used.To use an internal electrode, a high voltage cable must be inserted through the pipe, with one end connected to the holiday detector and the other end connected to the internal electrode. As an alternate method, the electrode may be connected to the end of a lance which is then inserted into the pipe. Using this method, the lance must be made of a metallic conductor or a cable must still be used to connect the holiday detector with the electrode.PLEASE NOTE: The inspection voltages to be used, with this type of electrode, must be at least 600 volts. To use inspection voltages lower than 600 volts, a "WET SPONGE" type of electrode must be used.

Internal ElectrodesInternal Electrodes


pigs prices

Documents