/// TPF-550 LT & TPF-750 LT

BDT‘s Independent Pile Feeders are designed specifical-ly to address the challenges of the wide media range to be handled in the digital print and finishing industry.

Using BDT‘s Tornado technology, the widest range of media types, surfaces and format geometries can be handled automatically with no media specific mechani-cal adjustments, and no compressed air.

/// HOW WE DEFINE AUTOMATION - INCREASE YOUR PROFITS

Easy to use - No manual adjustments

Fast media change - Settings can be saved

Increase profits - Reduce lost production time

Reliability - Stable across whole media range

Quiet operation - No compressors or valves

Flexibility - Widest media range in the industry

Low service costs - Modular architecture

High sheet delivery accuracy - Gap control

/// PILE FEEDER SERIES

BDT Print Media GmbHSaline 29 /// 78628 Rottweil /// Germany sales.tornado@bdt.de /// www.bdt-printmedia.de/en

simplify your change

Graphics / Publishing Packaging Post-Press Industrial / Others

CoatedUncoatedOffsetSpecialtyLabel Stock...

PaperboardC1S, C2SRecycledMetallizedMicrofluted...

Hot melt coated print-outsUV-coated print-outsEmbossed card stocksSpot varnished prints...

Plastic foilsSyntheticsSacksLight porous filter types...

As a result of BDT‘s continual product development program, we reserve the right to make changes to the product and it‘s performance and specifications.

Paper Metallized Embossed Carton

Microfluted Plastic Foils Porous Magnetic Spot Varnish

TPTPF-550 LT PTPF-750 LT

Product dimensions Length x width x height (1050 x 1350 x 1240) mm(4(4( 1.1.33 xx 5353.1.1 xx 448.8.8)8))‘‘

(1050 x 1600 x 1240) mm(4(4( 1.1.33 x x 6363 xx 448.8.8)8))‘‘

Product weigght 300 kgg // 661.4 lb 350 kgg // 771.6 lb

TrTranspppport sppppeed upppp to 3,0, m/s/ 3,,0 m//s

Media Width orthogonal totransport

max.min.

550 mm / 21.7‘‘210 mm / 8.3‘‘

750 mm / 29.5‘‘210 mm / 8.3‘‘

Length in direction to transport

max.min.

1066 mm / 42‘‘240 mm / 9.4‘‘

1066 mm / 42‘‘240 mm / 9.4‘‘

Media stack height up to 570 mm / 22.44‘‘ 570 mm / 22.44‘‘

Throughput * up to 24 000 sheets/h for A311 500 sheets//h for B2

24 000 sheets/h for A311 500 sheets//h for B2

Electrical requirements Input voltage 200 - 240 V | Single Phase

Frequency 50 / 60 Hz

Input current 6,5 A AC

Back uppp fuse 16 A

* Measured with 200 gsm media in offline mode.

simplify your change

/// MEDIA & TECHNICAL DATA

/// FEATURES

/// STANDARDPatented Tornado Suction Technology

Patented Side Aeration Technology

Multiple modes: Continuous feed / Single sheet test mode / Batch feed

Ready to go parameter setup

Contactless stack position sensor

Ultrasonic double sheet protection

Optical sensor for paper path

Dynamical gap control

Staging nip for high sheet delivery accuracy

Control, service and diagnostic features

Connective emergency stop interface

TCP/IP host control interface

Touch panel

Empty detection

/// OPTIONALExtended length formats for TPF 550 and TPF 750:

For formats >750 mm including table/guide extension and additional Side Blower Modules

Ergonomic loading: Comfort loading sensor

Override speed control (Encoder at host)

Intuitive Graphical User Interface for parameter setting and job control

f

/// TPF-550 LT /// TPF-750 LT

Media tyypep Dimensions ((w,, l) ) in mm Dimensions ((w,, l) ) in ‘‘

A4A4 SSEFEF 21210 0 xx 292977 8.8.2727 xx 111.1.6969

A3A SEF 297 x 420 11.69 x 16.54

B3B3 SSEFEF 35353 3 x x 505000 1313.9.90 0 xx 1919.6.699

A2A SEF 420 x 594 16.54 x 23.39

B2 SEF 500 x 707 13.90 x 27.83

BaBanner 297 x 1000 8.27 x 39.37

AA2 LEF 594 x 420 16.54 x 16.54

B2B2 LLEFEF 707077 xx 505000 2727.8.833 xx 1919.6.699

AA1 SEF 594 x 841 23.39 x 33.11

B1B1 SSEFEF 70707 7 xx 10100000 2727.8.83 3 xx 3939.3.377

SEF = Short Edge FeedLEF = Long Edge Feed

Illustration of typical classes of format that can be processed in the TPF-550 and TPF-750. The stack load position is center-feed. For clarity only common formats are shown. The media weight and thickness range specification for these and other formats is summa-rized according to width and lengt in the table “Format Media Range“.

A4 SEF A3 SEFB3 SEF

A2 SEF

BannerB2 SEF

A2 LEFB2 LEF

A1 SEFB1 SEF

additionalfeed direction feed direction

/// FORMAT CLASSIFICATION

Dimensions Media tyypep Media weigght Media thickness

w<w 356 mmw<w 14.02‘‘

uncoatedcoated

60 - 450 gsm80* - 450 gsgg m

75 - 600 microns

w=356 mm to 550 mmw=w=1414.0.02‘2 ‘ toto 221.1.6565‘‘

uncoatedcocoatateded

70 - 450 gsm9090* - 454500 gsgsgg mm

85 - 600 microns

w>550 mm, l<550 mmw>w 21.65‘‘, l<21.65‘‘

uncoatedcoated

70 - 450 gsm90* - 450 gsgg m

95 - 600 microns

w>550 mm, l>l 550 mm ((****))w>w>21.65‘‘,, l>21.65‘‘

uncoateddcoated

100 - 450 gsm120* - 450 ggggsm

110 - 600 microns

Heavy and superthick media (up to 600 gsm and/or 800 microns) possible with some degradation in throughput, to be tested for application* Valid for unprinted matte coated media; for pre-printed or art glossy coated papers a higher grammage is recommended, subject to application testing** Reduction of throughput possible

Sideblower arms swing up for access to loading bay

/// FORMAT MEDIA RANGE

Headquarters Germany

Netherlands

China

Israel

Singapore

Canada

USA

Mexico

simplify your change

/// BDT PRINT MEDIA

/// NOTES

/// E-mail: sales.tornado@bdt.de

/// Phone: +49 (0)741 - 248-269/// Fax: +49 (0)741 - 248-149

/// Address: Saline 29 . 78628 Rottweil Germany

/// YOUR CONTACT

The BDT Print Media Team is happy to

take inquiries and to offer information via

BDT Print Media GmbHSaline 29 /// 78628 Rottweil /// Germany sales.tornado@bdt.de /// www.bdt-printmedia.de/en

As of January 2017. Rev. 2017-1.1