pipe fittings manufactering & testings
TRANSCRIPT
![Page 1: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/1.jpg)
1
Fittings Manufacturing-
2
![Page 2: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/2.jpg)
2
Heat Treatment for Fittings• Heat treatment as per applicable ASTM
standard• Hot finished Fittings
−Temp. remain within heat treatment temperature till final size and thickness achieved
−No heat treatment required• Cold finished Fittings
−Fittings are clod drawn−heat treatment required
![Page 3: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/3.jpg)
3
Heat Treatment for Fittings•Normalizing•Quenching•Tempering•Solution Annealing •Stress reliving •Combination of above
![Page 4: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/4.jpg)
4
Hydrostatic Test• Not required unless
specifically requested by purchaser
• Code mandate that fittings shall be able to withstand under pressure required by applicable Piping Code
![Page 5: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/5.jpg)
5
Non Destructive testing• Ultrasonic • Radiography (Only for Weld) • Magnetic particle test• Liquid penetrant test• Positive Material Identification
![Page 6: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/6.jpg)
6
Distractive Testing• Proof test• Tensile test• Impact test / Charpy V-Notch Test• Hardness test
![Page 7: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/7.jpg)
7
Metallurgical Test• Micro Analysis or Chemical Analysis of
−Raw material−Product−Weld
• Macro Analysis or Grain size −Product−Weld
![Page 8: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/8.jpg)
8
Visual Inspection• Check for any surface defect (mechanical
marks, dents) and overall product quality• Check weld for welding defect such as
porosity, undercuts etc• Acceptance as per applicable standard
![Page 9: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/9.jpg)
9
Dimension Standard• Wrought Product (WP)
−ASME B16.9 Factory-made Wrought Butt-welding Fittings NPS 1⁄₂ through NPS 48
−B16.28 Wrought Steel Butt-Welding Short Radius Elbows and Returns NPS 1⁄₂ through NPS 24
• Forged Product−ASME B16.11 Forged Steel Fittings, Socket Welding and Threaded
![Page 10: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/10.jpg)
10
Dimension inspection • Following to be confirm during inspection
−Diameter−Length−Thickness−Straightness−Degree
![Page 11: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/11.jpg)
11
Marking • Following shall be marked on Fitting
−Manufacturer logo−ASTM material code−Material Grade−Size−Thickness (Schedule No)−Heat No−Compliance - for standard fittings –WP, for Special fittings S58,S8,SPLD etc.
VP 6” Sch80 A234 WPB ABC12
![Page 12: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/12.jpg)
12
Marking• Marking can be by paint or by Hard
punching• For stainless steel stenciling can be used• For carbon steel no hard punching below 6
mm thickness• For stainless steel no hard punching below
12 mm thickness
![Page 13: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/13.jpg)
13
What we have learned?• Heat Treatment• Inspection and Testing• Markings
![Page 14: Pipe fittings manufactering & testings](https://reader033.vdocument.in/reader033/viewer/2022051404/5871acd41a28abda6a8b5c61/html5/thumbnails/14.jpg)
14
To learn more about pipe and pipe fittings take my online course at 90% discountclick on https://www.udemy.com/process-pipe-fittings-for-oil-gas-career/?couponCode=FB10
How to be an Expert in Pipe & Fittings for
Oil & Gas career
Click hear to Enrolled Now