pipettes assemble procedures
DESCRIPTION
External parts of the pipette: Pipette Parts „vocabulary” External parts of the pipette: Pipetting Pushbutton + Knob Internal parts of the pipette lower part: Ejector Pushbutton Piston Assay Volume Adjustment Knob + Locking Ring Piston Spring Shaft Nut Compression Set Tip Ejector Compression Bush Shaft Seal and O-ringTRANSCRIPT
Pipettes Assemble Procedures
This instruction has been prepared to assist you during the maintenance
of your HTL pipette. The following diagrams focus on the assemble
procedure of the selected (representative) models of the micro,
mid-range and macro-volume pipettes.
Please follow this instruction during pipette cleaning or replacement of
parts of the lower part of the pipette.
All information provided here applies to
Discovery Comfort / Discovery+, Labmate Pro / Labmate Soft, Optipette and Discovery PRO singlechannel pipette lines.
Pipette Parts„vocabulary”
External parts of the pipette: Pipetting Pushbutton + Knob
Volume Adjustment Knob + Locking Ring
Shaft Nut
Tip Ejector
Shaft
Internal parts of the pipette lower part:
Piston Assay
Piston Spring
Compression Set
Compression Bush
Seal and O-ring
Ejector Pushbutton
Pipette Parts„vocabulary”
External parts of the pipette: Pipetting Pushbutton
Ejector Pushbutton
Shaft Cap
Tip Ejector
Shaft [in models DP2 - DP100 the set consist of:- shaft holder set
(upper part)- shaft
(lower part)]
Internal parts of the pipette lower part:
Piston + Spring
Blocking Bush
Compression Spring
Compression Bush
Seal and O-ring
Adjustment Knob (with volume lock mechanism)