piranha multi-port connector phm4-6-4/0 b · postal address: sicame corporation 808 north central...

POSTAL ADDRESS: Sicame Corporation

808 North Central Avenue - Unit F Wood Dale, IL 60191

GENERAL INFORMATION: [email protected] www.sicameusa.com Ph:(630) 238-6680

PIRANHA MULTI-PORT CONNECTOR PHM4-6-4/0 B

The PHM4-6-4/0B multi-port connector is part of the PiranhaTM range of waterproof, fully insulated, direct bury insulation piercing connectors. The connector is able to be used on Copper or Aluminum cables from #4 to 4/0 AWG.

Features: Connector body manufactured from high strength Aluminum alloy. Piercing teeth manufactured from high strength, tin plated diecast brass. Thermoplastic rubber overmold provides long-lasting water-tight seals. All seals are pre-greased with silicone grease. Fully insulated rugged ¾” plastic shear heads suitable for impact wrench installation. Can be used in both overhead and underground applications. No stripping of cables required.

Test Specification: ANSI C119.1 Equivalent to IP67 protection rating

PHM4-6-4/0 B CABLE SIZE SEAL REQUIREMENT

#6 Use auxiliary seal

#4 #2 #1

1/0

Remove auxiliary seal 2/0 3/0 4/0

mailto:[email protected]




PIRANHA MULTI-PORT CONNECTOR PHM4-6-4/0 BS

The PHM4-6-4/0BS multi-port connector is part of the PiranhaTM range of waterproof, fully insulated, direct bury insulation piercing connectors. The connector is able to be used on Copper or Aluminum cables from #4 to 4/0 AWG.

Features:

Connector body manufactured from high strength Aluminum alloy. Piercing teeth manufactured from high strength, tin plated diecast brass. Thermoplastic rubber overmold provides long-lasting water-tight seals. All seals are pre-greased with silicone grease. Fully insulated rugged ¾” plastic shear heads suitable for impact wrench installation. Can be used in both overhead and underground applications. Single bolt per port for faster installation. No stripping of cables required.


PHM4-6-4/0 BS CABLE SIZE SEAL REQUIREMENT


#4 #2 #1

1/0






PIRANHA MULTI-PORT CONNECTOR PHM4-6-4/0 T

The PHM4-6-4/0T multi-port connector is part of the PiranhaTM range of waterproof, fully insulated, direct bury insulation piercing connectors. The connector is able to be used on Copper or Aluminum cables from #4 to 4/0 AWG.

Features: Connector body manufactured from high strength Aluminum alloy. Piercing teeth manufactured from high strength, tin plated diecast brass. Thermoplastic rubber overmold provides long-lasting water-tight seals. All seals are pre-greased with silicone grease. Fully insulated rugged ¾” plastic shear heads suitable for impact wrench installation. Transparent overmold for easy viewing of correct conductor installation. No stripping of cables required.


PHM4-6-4/0 T CABLE SIZE SEAL REQUIREMENT


#4 #2 #1

1/0






PIRANHA MULTI-PORT CONNECTOR PHM5-6-4/0 B

The PHM5-6-4/0B multi-port connector is part of the PiranhaTM range of waterproof, fully insulated, direct bury insulation piercing connectors. The connector is able to be used on Copper or Aluminum cables from #4 to 4/0 AWG.

Features:

Connector body manufactured from high strength Aluminum alloy. Piercing teeth manufactured from high strength, tin plated diecast brass. Thermoplastic rubber overmold provides long-lasting water-tight seals. All seals are pre-greased with silicone grease. Fully insulated rugged ¾” plastic shear heads suitable for impact wrench installation. Can be used in both overhead and underground applications. No stripping of cables required.


PHM5-6-4/0 B CABLE SIZE SEAL REQUIREMENT


#4 #2 #1

1/0






PIRANHA MULTI-PORT CONNECTOR PHM5-6-4/0 T

The PHM5-6-4/0T multi-port connector is part of the PiranhaTM range of waterproof, fully insulated, direct bury insulation piercing connectors. The connector is able to be used on Copper or Aluminum cables from #4 to 4/0 AWG.

Features:

Connector body manufactured from high strength Aluminum alloy. Piercing teeth manufactured from high strength, tin plated diecast brass. Thermoplastic rubber overmold provides long-lasting water-tight seals. All seals are pre-greased with silicone grease. Fully insulated rugged ¾” plastic shear heads suitable for impact wrench installation. Transparent overmold for easy viewing of correct conductor installation. No stripping of cables required.


PHM5-6-4/0 T CABLE SIZE SEAL REQUIREMENT


#4 #2 #1

1/0






PIRANHA MULTI-PORT CONNECTOR PHM5-250-500 B

The PHM5-250-500B multi-port connector is part of the PiranhaTM range of waterproof, fully insulated, direct bury insulation piercing connectors. The connector is able to be used on Copper or Aluminum cables from 250MCM to 500MCM AWG.

Features:

Connector body manufactured from high strength Aluminum alloy. Piercing teeth manufactured from high strength, tin plated diecast brass. Thermoplastic rubber overmold provides long-lasting water-tight seals. All seals are pre-greased with silicone grease. Fully insulated rugged ¾” plastic shear heads suitable for impact wrench installation. Can be used in both overhead and underground applications. No stripping of cables required.


PHM5-250-500 B CABLE SIZE SEAL REQUIREMENT

250MCM Use auxiliary seal 300MCM 350MCM 400MCM Remove auxiliary seal 500MCM





PIRANHA MULTI-PORT CONNECTOR PHM5-250-500 T

The PHM5-250-500T multi-port connector is part of the PiranhaTM range of waterproof, fully insulated, direct bury insulation piercing connectors. The connector is able to be used on Copper or Aluminum cables from 250MCM to 500MCM AWG.

Features:

Connector body manufactured from high strength Aluminum alloy. Piercing teeth manufactured from high strength, tin plated diecast brass. Thermoplastic rubber overmold provides long-lasting water-tight seals. All seals are pre-greased with silicone grease. Fully insulated rugged ¾” plastic shear heads suitable for impact wrench installation. Transparent overmold for easy viewing of correct conductor installation. No stripping of cables required.


PHM5-250-500 T CABLE SIZE SEAL REQUIREMENT

250MCM Use auxiliary seal 300MCM 350MCM 400MCM Remove auxiliary seal 500MCM





PIRANHA MULTI-PORT CONNECTOR PHM6-6-500 B

The PHM5-6-4/0B multi-port connector is part of the PiranhaTM range of waterproof, fully insulated, direct bury insulation piercing connectors. The connector is able to be used on Copper or Aluminum cables from #6 to 500MCM AWG.

Features: Connector body manufactured from high

strength Aluminum alloy. Piercing teeth manufactured from high

strength, tin plated diecast brass. Thermoplastic rubber overmold provides long-lasting water-tight seals. All seals are pre-greased with silicone grease. Fully insulated rugged ¾” plastic shear heads suitable for impact wrench installation. Can be used in both overhead and underground applications. No stripping of cables required.


PHM 6-6-500 B CABLE SIZE SEAL REQUIREMENT

#6 Use auxiliary seal Outer ports only

#4 #2 #1

1/0 Remove auxiliary seal Outer ports only 2/0

3/0 4/0

250MCM Use auxiliary seal Inner ports only 300MCM

350MCM 400MCM Remove auxiliary seal

Inner ports only 500MCM


piranha multi-port connector phm4-6-4/0 b · postal address: sicame corporation 808 north central...

Documents