pk industrial plugs and sockets - filkab.comfilkab.com › files › category_files ›...

PK industrial plugs and sockets

1Schneider Electric

PK industrial plugs and socketsGeneral index

PK plugs and sockets – low voltage

General presentation 4

Selection guide 10

Wander plugs - PK PratiKa FAST 14

Wander plugs - PK 15

90° Wander plugs 16

Wall-mounted plugs 17

Panel-mounted plugs 18

Plugs with phase inverter 20

Wander sockets - PK PratiKa FAST 22

Wander sockets - PK 23

Wall-mounted sockets 24

Panel-mounted sockets - PK PratiKa FAST 26

Panel-mounted sockets - PK 28

Plugs and sockets for container 30


Selection guide 36

Wander plugs 38

Wall-mounted plugs 39

Wander sockets 40

Wall-mounted the sockets 41

Panel-mounted sockets 42

PK plugs and sockets – extra low voltage


Selection guide 46

PK Unika 48

PK Isoblock 56

PK sockets with interlock switch


Selection guide 67

Enclosures for sockets 68

Interface enclosures 69

Fitting system 70

Functional plates & accessories 71

Assemblies: Sockets with RCD protection 74

Kaedra system

General code index 96

Dimensions 83

Technical guide 75

IndexGeneral presentation 4Selection guide 10Wander plugs - PK PratiKa FAST 14Wander plugs - PK 1590° Wander plugs 16Wall-mounted plugs 17Panel-mounted plugs 18Plugs with phase inverter 20Wander sockets - PK PratiKa FAST 22Wander sockets - PK 23Wall-mounted sockets 24Panel-mounted sockets - PK PratiKa FAST 26Panel-mounted sockets - PK 28Plugs and sockets for container 30

PPK plugs and socketsLow voltage

Schneider Electric4

Discover PK plugs and socketsLow voltageGeneral presentation

A complete range of highperformance industrial plugsand sockets

The PK range of industrial plugs and socketsis basically designed to suit all needs and allkinds of environments: tertiary sector,building sites, workshops, agricultural sector,as well as indoor and outdoor of any kind ofbuilding. These sockets are in conformity withthe international IEC309-1 and IEC309-2standards.

This wide range of plugs andsockets, which are solid, well-sealed and also resistant tochemical and atmosphericagents, is the result ofSchneider Electric’s experienceand know-how.

❑ Very high performance products❑ Easy installation❑ A complete range

PK PratiKa:a world widepatentedinnovation

This new rangepresents, the PKPratiKa FAST withinnovating solutionsin the connection, inthe closing and in thecable clamp.The FAST patentedsolution, enables theconnection to bemade withoutstripping theconductor andwithout the use ofscrews.

These solutions are:❑ fast to connect❑ safe in use❑ functional and

ergonomic❑easy and intuitive

PK:a completerange ofproducts

PK represents arange of highlyfunctional 16, 32, 63and 125A low-voltageindustrial sockets inall the differentversions, inconformity withstandards.❑ Wander plugs and

sockets❑ Wall mounting

plugs and sockets❑ Panel mouting

plugs and socketsavailable indifferent numbersof pole (2P+E3P+E and3P+N+E)

PK:easyInstallationeverywhere

The PK sockets aresuitable for all thedifferentconfigurations:❑ Wall-mounted near

the load❑ Wander version for

flexible powercable connection

❑ Direct mounting orthrough box

❑ Very fast mountingon Kaedraenclosure forsockets or withinterface

❑ Mounting onspecial plates forquick installationon Prisma GKpanels: there is noneed to drill holesor cut out holes

5Schneider Electric

PK PratiKa with FASTconnectionThe new FAST connecting system is themost innovating solution of this series whichguarantees the connection without strippingthe conductor and without screws.This logo is the guarantee of the newpatented connecting system of the FASTseries.Note the new latching system of the body-handgrip and the cable clamp.

Discover PK plugs and socketsLow voltagePK PratiKa

PK PratiKa rangeIt consists of a new series with innovatingtechnical solutions: the PK PratiKa withFAST connections.

The series is available for the 16 and 32Awith degree of protection IP44 and IP67, inthe wander and panel versions.PK PratiKa have a new mnemonicreference system described on page 11.

PK PratiKa panel-mountingThe new panel-mounting versions of theFAST connection have standardized fixingflanges. They have same dimensions for thestraight and angled versions:❑ 65x85mm in the 16A, 2P+E and 3P+E

versions❑ 90x100mm in the 16A, 3P+N+E version

and all the 32A variantsThey are easily mounted in all the socketpositions of the Kaedra enclosures.

PK PratiKa

Schneider Electric6

The wander plugs and sockets are deliveredwith the handgrip not fully tightened ontothe body therefore, the first installation doesnot need any use of a tool.The simple pressure of the blade of ascrewdriver (or another tool) releases thebody.

FAST CONNECTIONThe screwless connections thateliminate the need to strip theconductor insulation; the colourcoded conductor retainers greatlysimplify and speed up the connectionprocess.

The closing is achieved bymeans of a 1/4 turn rotation ofthe handgrip on the body. Thelock is by a stainless-steel insert(spring) and gives particularrigidity and durability to theassembly. A "CLICK" indicateswhen the closing operation iscomplete.

The external cable clamp, with its integralcable-gland and its ring nut, is very easy totight up by hand and does not need the useof a tool.The design prevents accidental unscrewingor loosening due to vibration or mechanicalstresses.


7Schneider Electric

The practicality of the new system, thesimplicity of the PK PratiKa FAST connection,together with the spacious Kaedra enclosures,assure maximum simplicity and flexibility inbuilding up socket enclosures.

The series PK PratiKa from a technicaland functional point of view is perfectlycoherent with the PK series andKaedra enclosure system boosting theimage of complete offer and its design.

The retaining fin on the wanderplugs, also on the wander sockets,allows the hanging of the productto make it always available andtotally visible.

The cap of the IP44 wander socketsis provided with a tab for easyopening during plug insertion.


Schneider Electric8

The worldwide innovationThe fast connection is the great innovationintroduced in this range of products and givesgreat technical and functional advantages tothe products as it:❑ allows the electrical connections withoutstripping each conductor❑ guarantees the electrical conductivity andmechanical resistance even if the conductorshould be wrongly stripped.

❑ extremely simple connection of theconductors without stripping them

❑ easy identification of the conductorsthrough the coloured conductor-holderlever

❑ no more maintenance for the control andthe re-clamping of the screws of theclamps

...even faster

❑ a pre-defined constant and guaranteedcontact pressure over the lifetime,assures reduced heat loss

❑ the contacts are insensitive to vibrationsand shocks

❑ no risk of breaking or damaging thecopper conductor due to over tighteningof the screws

...even safer

...even more practical

PK plugs and socketsLow voltagePK PratiKa

The worldwide patentThe new range of the PK PratiKa fast plugsand sockets gives an assembling and cablingreduction in time of 80% (if compared to thetraditional products). Nowadays it isabsolutely the fastest on the market.

Discover

❑ the intuitive connection system ofconductor-holder lever, guarantees aquality job for those who have never usedthis technology

❑ guaranteed connection and mechanicalseal also in case of stripped conductor.

❑ hookup mechanic device of theconductor-holder lever underlines thecorrect connection (click!)

9Schneider Electric

PK 63 and 125AThe range of 63 and 125A is only available inIP67 version. The nickel-plated contacts, thestainless steel screws, pins and springs, thehigh performing plastic materials, ensure themaximum protection even in very humid anddusty environments.See page 15, 23, 28, 29

90° Wander plugsThis version reduces the space needed infront of the panel and limits the mechanicalstresses upon the cables, due to theabsence of bends.See page 16

Discover PK plugs and socketsLow voltagePK series

Phase inversion plugsDesigned to solve quickly and safely theproblems concerning electrical connectionsof all rotary equipment. It is possible to invertthe positions of two plug pins and, hence, therotary direction of the motor by using anordinary screwdriver and without unscrewingthe plug to change the cable connection.See page 20

Plugs and sockets forcontainersThese are designed to power refrigeratedcontainers in ports, railway stations andcontainer-ships. They have been built toensure maximum protection and guaranteedfunctioning in highly aggressive andcorrosive environments. The wander andpanel versions are available in the PKPratiKa version. See page 30

Schneider Electric10

3 P+ 50/60 100-130Vac 4h 813763 P+N+ 50/60 4h 81377

2 P+ 50/60 6h 81378 63A 3 P+ 50/60 200-250Vac 9h 81379

3 P+N+ 50/60 9h 81380

3 P+ 50/60 380-415Vac 6h 813823 P+N+ 50/60 6h 81383

3 P+ 50/60 4480-500Vaca 7h 813853 P+N+ 50/60 7h 81386

3 P+ 50/60 100-130Vac 4h 813883 P+N+ 50/60 4h 81389

2 P+ 50/60 6h 81390 125A 3 P+ 50/60 200-250Vac 9h 81391

3 P+N+ 50/60 9h 81392

3 P+ 50/60 380-415Vac 6h 813943 P+N+ 50/60 6h 81395

3 P+ 50/60 480-500Vac 7h 813973 P+N+ 50/60 7h 81398

Select and understand PK and PK PratiKa plugsLow voltageSelection guide

PK Plugs 16 - 32AIEC 309-1 and IEC 309-2

Rated Poles and Frequency Rated Clock Wander plugs Wander plugs 90° Wander plugs

current wires voltage position Fast connect

A Hz V of contact IP 44 IP 67 IP67 IP 44 IP 67

2 P+ 50/60 4h PKX16M413 PKX16M713 81701 817513 P+ 50/60 100-130Vac 4h PKX16M414 PKX16M714 81702 817523 P+N+ 50/60 4h PKX16M415 PKX16M715 81703 81753

2 P+ 50/60 6h PKX16M423 PKX16M723 81704 81754 16A 3 P+ 50/60 200-250Vac 9h PKX16M424 PKX16M724 81705 81755

3 P+N+ 50/60 9h PKX16M425 PKX16M725 81706 81756


3 P+ 50/60 4480-500Vaca 7h PKX16M444 PKX16M744 81711 817613 P+N+ 50/60 7h PKX16M445 PKX16M745 81712 81762


2 P+ 50/60 6h PKX32M423 PKX32M723 81716 81766 32A 3 P+ 50/60 200-250Vac 9h PKX32M424 PKX32M724 81717 81767

3 P+N+ 50/60 9h PKX32M425 PKX32M725 81718 81768

2 P+ 50/60 9h PKX32M433 PKX32M733 81719 817693 P+ 50/60 380-415Vac 6h PKX32M434 PKX32M734 81720 817703 P+N+ 50/60 6h PKX32M435 PKX32M735 81721 817713 P+ 50/60 CONTAINER 3h PKX32M7C4 81799

3 P+ 50/60 480-500 Vac 7h PKX32M444 PKX32M744 81723 817733 P+N+ 50/60 7h PKX32M445 PKX32M745 81724 81774

PK Plugs 63 - 125AIEC 309-1 and IEC 309-2

11Schneider Electric

Wall-mounted plugs Panel-mounted plugs Phase inverters

IP 44 IP 67 IP 44 IP 67 IP 44 IP 67 IP 44 IP 67 IP 44 IP 67 IP 44 IP 67

83501 83551 81801 8385183502 83552 81802 83852 83904 83914 81726 81776 83526 83576 83826 8387683503 83553 81803 83853 83905 83915 81727 81777 83527 83577 83827 83877

83504 83554 81804 8385483505 83555 81805 83855 83901 83911 81728 81778 83528 83578 83828 8387883506 83556 81806 83856 83906 83916 81729 81779 83529 83579 83829 83879

83507 83557 81807 8385783508 83558 81808 83858 83902 83912 81730 81780 83530 83580 83830 8388083509 83559 81809 83859 83903 83913 81731 81781 83531 83581 83831 83881

83511 83561 81811 83861 83907 83917 81732 81782 83532 83582 83832 8388283512 83562 81812 83862 83908 83918 81733 81783 83533 83583 83833 83883

83513 83563 81813 8386383514 83564 81814 8386483515 83565 81815 83865

83516 83566 81816 8386683517 83567 81817 8386783518 83568 81818 83868

83519 83569 81819 8386983520 83570 81820 8387083521 83571 81821 83871

83523 83573 81823 8387383524 83574 81824 83874

8157681577

815788157981580

8158281583

8158581586

8158881589

81590

81591

81592

81594

81595

81597

81598

Wander-plugs 90° Wander plugs Wall-mounted plugs Panel-mounted plugs

VersionsPKX = FAST plugPKY = FAST socket

Poles3 = 2P+4 = 3P+5 = 3P+N+

Voltage1 = 110V2 = 220V3 = 380V4 = 480VC = for container

Protection4 = IP447 = IP67

Current (A)1632

ExecutionM = WanderF = Flush angled (panel mounted)G = Flush straight (panel mounted)

PKX 324M16

Learn how to define your PK PratiKa industrial plugs and sockets


3 P+ 50/60 100-130Vac 4h3 P+N+ 50/60 4h

2 P+ 50/60 6h 63A 3 P+ 50/60 200-250Vac 9h

3 P+N+ 50/60 9h

3 P+ 50/60 380-415Vac 6h3 P+N+ 50/60 6h

3 P+ 50/60 4480-500Vaca 7h3 P+N+ 50/60 7h

3 P+ 50/60 100-130Vac 4h3 P+N+ 50/60 4h

2 P+ 50/60 6h 125A 3 P+ 50/60 200-250Vac 9h

3 P+N+ 50/60 9h

3 P+ 50/60 380-415Vac 6h3 P+N+ 50/60 6h

3 P+ 50/60 480-500Vac 7h3 P+N+ 50/60 7h

Select and understand PK and PK PratiKa socketsLow voltageSelection guide

PK Sockets 16 - 32AIEC 309-1 and IEC 309-2

Rated Poles and Frequency Rated Clock Wander sockets

current wires voltage position Fast connect Angled Fast connect Straight Fast connect

A Hz V of contact IP 44 IP 67 IP44 IP67 IP 44 IP 67

2 P+ 50/60 4h PKY16M413 PKY16M713 PKY16F413 PKY16F713 PKY16G413 PKY16G7133 P+ 50/60 100-130Vac 4h PKY16M414 PKY16M714 PKY16F414 PKY16F714 PKY16G414 PKY16G7143 P+N+ 50/60 4h PKY16M415 PKY16M715 PKY16F415 PKY16F715 PKY16G415 PKY16G715

2 P+ 50/60 6h PKY16M423 PKY16M723 PKY16F423 PKY16F723 PKY16G423 PKY16G723 16A 3 P+ 50/60 200-250Vac 9h PKY16M424 PKY16M724 PKY16F424 PKY16F724 PKY16G424 PKY16G724

3 P+N+ 50/60 9h PKY16M425 PKY16M725 PKY16F425 PKY16F725 PKY16G425 PKY16G725


3 P+ 50/60 4480-500Vaca 7h PKY16M444 PKY16M744 PKY16F444 PKY16F744 PKY16G444 PKY16G7443 P+N+ 50/60 7h PKY16M445 PKY16M745 PKY16F445 PKY16F745 PKY16G445 PKY16G745


2 P+ 50/60 6h PKY32M423 PKY32M723 PKY32F423 PKY32F723 PKY32G423 PKY32G723 32A 3 P+ 50/60 200-250Vac 9h PKY32M424 PKY32M724 PKY32F424 PKY32F724 PKY32G424 PKY32G724

3 P+N+ 50/60 9h PKY32M425 PKY32M725 PKY32F425 PKY32F725 PKY32G425 PKY32G725

2 P+ 50/60 9h PKY32M433 PKY32M733 PKY32F433 PKY32F733 PKY32G433 PKY32G7333 P+ 50/60 380-415Vac 6h PKY32M434 PKY32M734 PKY32F434 PKY32F734 PKY32G434 PKY32G7343 P+N+ 50/60 6h PKY32M435 PKY32M735 PKY32F435 PKY32F735 PKY32G435 PKY32G7353 P+ 50/60 CONTAINER 3h PKY32M7C4 PKY32F7C4 PKY32G7C4

3 P+ 50/60 480-500Vac 7h PKY32M444 PKY32M744 PKY32F444 PKY32F744 PKY32G444 PKY32G7443 P+N+ 50/60 7h PKY32M445 PKY32M745 PKY32F445 PKY32F745 PKY32G445 PKY32G745

Panel mounted sockets

PK Sockets 63 - 125AIEC 309-1 and IEC 309-2

Rated Poles and Frequency Rated Clock Wander sockets Panel mounted socketscurrent wires voltage position Fast connect Angled Fast connect Straight Fast connect

A Hz V of contact IP 44 IP 67 IP44 IP67 IP 44 IP 67


81476 81276 81676 8117681477 81277 81677 81177

81478 81278 81678 8117881479 81279 81679 8117981480 81280 81680 81180

81482 81282 81682 8118281483 81283 81683 81183

81485 81285 81685 8118581486 81286 81686 81186

81488 81288 81688 8118881489 81289 81689 81189

81490 81290 81690 8119081491 81291 81691 8119181492 81292 81692 81192

81494 81294 81694 8119481495 81295 81695 81195

81497 81297 81697 8119781498 81298 81698 81198

Small wall-mounted sockets Wall-mounted sockets

IP 67 IP 44 IP 67

82201 82251 83101 8315182202 82252 83102 8315282203 82253 83103 83153

82204 82254 83104 8315482205 82255 83105 8315582206 82256 83106 83156

82207 82257 83107 8315782208 82258 83108 8315882209 82259 83109 83159

82211 82261 83111 8316182212 82262 83112 83162

82213 82263 83113 8316382214 82264 83114 8316482215 82265 83115 83165

82216 82266 83116 8316682217 82267 83117 8316782218 82268 83118 83168

82219 82269 83119 8316982220 82270 83120 8317082221 82271 83121 83171

82223 82273 83123 83173

82224 82274 83124 83174

Wander sockets Panel mounted sockets Wall-mounted sockets

Angled Straight

IP 67 IP 67 IP 67 IP 67


Select and understand PK plugs and socketsLow voltageWander plugsFAST connection, without screws

FunctionsDesigned to supply fixed or movable equipment by a flexible cable.

Characteristics■ Degree of protection, according to IEC 60529:❑ PK PratiKa: 16 and 32A IP44 and IP 67;■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 60695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ pins made of nickel-plated brass■ Cable entry:

In IP 44 / IP 67membrane and cable clamp

16A 8 - 15mm

32A 11.5 - 21mm

■ Connection terminals :❑ fast connection without screws and without stripping the conductor■ Maximum cross section of conductors:

In stranded wire flexible cables

16A 1 to 2.5mm2

32A 2.5 to 6mm2

PK PratiKaWander plugs

.

IP 67

IP 44

PKX16M423

PKX16M733

rated poles and rated voltage

current wired 100-130V 200-250V 380-415V 480-500V

16A 2P+ PKX16M413 PKX16M423 PKX16M433

3P+ PKX16M414 PKX16M424 PKX16M434 PKX16M444

3P+N+ PKX16M415 PKX16M425 PKX16M435 PKX16M445

32A 2P+ PKX32M413 PKX32M423 PKX32M433




current wires 100-130V 200-250V 380-415V 480-500V

16A 2P+ PKX16M713 PKX16M723 PKX16M733



32A 2P+ PKX32M713 PKX32M723 PKX32M733




Select and understand PK plugs and socketsLow voltageWander plugs


Characteristics■ Degree of protection, according to IEC 60529:❑ PK: 63 and 125A IP67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 60695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ pins made of nickel-plated brass■ Cable entry:

In IP67cable gland

63A 17 - 31mm / PG 36

125A 26 - 48mm / PG 48

■ Connection terminals:❑ captive screws, completely loosened❑ maximum cross section of conductors:

In Stranded wire flexible cables

63A 6 to 25mm2

125A 16 to 70mm2

IP 67rated poles and rated voltage


63A 2P+ 81378

3P+ 81376 81379 81382 81385

3P+N+ 81377 81380 81383 81386

125A 2P+ 81390

3P+ 81388 81391 81394 81397

3P+N+ 81389 81392 81395 81398

81395

PKWander plugs


Select and understand PK plugs and socketsLow voltage90° Wander plugs

FunctionsThey have the advantage that the space required in front of the socket is kept to aminimum.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67■ Degree of protection against external mechanical impacts, according to EN 50

102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials :❑ housing made of self-extinguishing engineering polymer❑ pins made of nickel-plated brass❑ stainless steel screws■ Cable entry:

In IP 44 / IP 67 IP 67membrane cable gland

16A 8 - 15mm PG 16 (PG 21 5P)

32A 11.5 - 21mm PG 21

■ Connection terminals :❑ captive screws, completely loosened❑ maximum cross section of conductors:


16A 1 to 4mm2

32A 2.5 to 10mm2

90° Wander plugs

.



16A 2P+ 81751 81754 81757

3P+ 81752 81755 81758 81761

3P+N+ 81753 81756 81759 81762

32A 2P+ 81763 81766 81769

3P+ 81764 81767 81770 81773

3P+N+ 81765 81768 81771 81774



16A 2P+ 81701 81704 81707

3P+ 81702 81705 81708 81711

3P+N+ 81703 81706 81709 81712

32A 2P+ 81713 81716 81719

3P+ 81714 81717 81720 81723

3P+N+ 81715 81718 81721 81724

81704

81770


FunctionsThey can be installed on an appliance to enable supply by wander socket.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67; 63 and 125A IP67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials :❑ housing made of self-extinguishing engineering polymer❑ pins made of nickel-plated brass❑ stainless steel screws■ Cable entry:

In IP44 IP67membrane cable gland

16A 8 – 15mm PG16 (PG21 5P)

32A 11.5 – 21mm PG 21

63A PG 36

125A PG 48

■ Connection terminals :❑ captive screws, completely loosened❑ maximum cross section of conductors :


16A 1 to 4mm2

32A 2.5 to 10mm2

63A 6 to 25mm2

125A 16 to 70mm2

Wall-mounted plugs



16A 2P+ 83551 83554 83557

3P+ 83552 83555 83558 83561

3P+N+ 83553 83556 83559 83562

32A 2P+ 83563 83566 83569

3P+ 83564 83567 83570 83573

3P+N+ 83565 83568 83571 83574

63A 2P+ 81578

3P+ 81576 81579 81582 81585

3P+N+ 81577 81580 81583 81586

125A 2P+ 81590

3P+ 81588 81591 81594 81597

3P+N+ 81589 81592 81595 81598

IP 67



16A 2P+ 83501 83504 83507

3P+ 83502 83505 83508 83511

3P+N+ 83503 83506 83509 83512

32A 2P+ 83513 83516 83519

3P+ 83514 83517 83520 83523

3P+N+ 83515 83518 83521 83524

IP 44

Select and understand PK plugs and socketsLow voltageWall-mounted plugs

83508

83559


FunctionsThey can be installed on an appliance to enable supply by wander socket.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials :❑ housing made of self-extinguishing engineering polymer❑ pins made of nickel-plated brass■ Connection terminals :❑ captive screws, completely loosened❑ maximum cross section of conductors:


16A 1 to 4mm2

32A 2.5 to 10mm2

Panel-mounted plugs

Select and understand PK plugs and socketsLow voltagePanel-mounted plugs

81804

rated poles and flange rated voltage

current wires dimensions 100-130V 200-250V 380-415V 480-500V

16A 2P+ 65 x 85 81801 81804 81807

3P+ 65 x 85 81802 81805 81808 81811

3P+N+ 90 x 100 81803 81806 81809 81812

32A 2P+ 90 x 100 81813 81816 81819

3P+ 90 x 100 81814 81817 81820 81823

3P+N+ 90 x 100 81815 81818 81821 81824

IP 44


Select and understand PK plugs and socketsLow voltagePanel-mounted plugs


current wires dimensions 100-130V 200-250V 380-415V 480-500V

16A 2P+ 65 x 85 83851 83854 83857

3P+ 65 x 85 83852 83855 83858 83861

3P+N+ 90 x 100 83853 83856 83859 83862

32A 2P+ 90 x 100 83863 83866 83869

3P+ 90 x 100 83864 83867 83870 83873

3P+N+ 90 x 100 83865 83868 83871 83874

IP 67

Caps for IP44 and IP67 plugs

rated poles and Reference

current wires

16A 2P+ 83933

3P+ 83934

3P+N+ 83935

32A 2P+ 83936

3P+ 83936

3P+N+ 83937

IP 67

83871

83934


Discover PK plugs and socketsLow voltagePlugs with phase inversion

Solution for rapid inversion ofphase rotation

The PK plugs with phase inversion provide asafe, rapid solution to electrical connectionproblems in all rotary machines.In fact, they permit a rapid inversion of thepositions of the two pins and the phasesequence and, subsequently, the machinerotation direction, without having to open theplug and change the connections. This isachieved by simply pressing with ascrewdriver on the specific area with a 180°rotation of the contact-gate block clockwiseor counter-clockwise, until total inversion ofthe phases is obtained.

The range includes different models:❑ Wander plugs❑ 90° Wander plugs❑ Wall-mounting plugs❑ Panel-mounting plugs

Characteristics■ Operating voltage: 230V■ Operating frequency: 50 / 60Hz■ Rated current: 16A■ Degree of protection according to IEC 529: IP 44 and IP 67■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ pins made of nickel-plated brass❑ stainless steel screws

■ Connection terminal:❑ captive screws, completely loosened❑ maximum cross section of conductors:

In IP 44 / IP 67 IP 67membrane cable gland

16A 8 - 15mm PG 16 (PG 21 5P)

In Solid and stranded wire flexible cables

16A 1 to 4mm2


Select and understand PK plugs and socketsLow voltagePlugs with phase inversion

Wander plugs with phase inversion

90° Wander plugs with phase inversion

Wall-mounted plugs with phase inversion

Panel-mounted plugs with phase inversion

Caps for IP 44 an IP67 plugs



16A 3P+ 83904 83901 83902 83907

3P+N+ 83905 83906 83903 83908

IP 6716A 3P+ 83914 83911 83912 83917

3P+N+ 83915 83916 83913 83918



16A 3P+ 81726 81728 81730 81732

3P+N+ 81727 81729 81731 81733

IP 6716A 3P+ 81776 81778 81780 81782

3P+N+ 81777 81779 81781 81783



16A 3P+ 83526 83528 83530 83532

3P+N+ 83527 83529 83531 83533

IP 6716A 3P+ 83576 83578 83580 83582

3P+N+ 83577 83579 83581 83583



16A 3P+ 83826 83828 83830 83832

3P+N+ 83827 83829 83831 83833

IP 6716A 3P+ 83876 83878 83880 83882

3P+N+ 83877 83879 83881 83883

IP 67rated poles and

current wires Code

16A 3P+ 83934

3P+N+ 83935


Select and understand PK plugs and socketsLow voltageWander socketsFAST connection, without screws


Characteristics■ Degree of protection, according to IEC 60529:❑ PK PratiKa: 16 and 32A IP44 and IP 67;■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 60695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleevs made of brass■ Cable entry:

In IP 44 / IP 67membrane and cable clamp

16A 8 - 15mm

32A 11.5 - 21mm

■ Connection terminals :❑ fast connection without screws and without stripping the conductor❑ maximum cross section of conductors:


16A 1 to 4mm2

32A 2.5 to 6mm2

PK PratiKaWander sockets

PKY16M423



16A 2P+ PKY16M413 PKY16M423 PKY16M433

3P+ PKY16M414 PKY16M424 PKY16M434 PKY16M444

3P+N+ PKY16M415 PKY16M425 PKY16M435 PKY16M445

32A 2P+ PKY32M413 PKY32M423 PKY32M433



IP 44



16A 2P+ PKY16M713 PKY16M723 PKY16M733



32A 2P+ PKY32M713 PKY32M723 PKY32M733



IP 67

PKY16M733


PK plugs and socketsLow voltageWander sockets


Characteristics■ Degree of protection, according to IEC 60529:❑ PK: 63 and 125A IP67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 60695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ pins and springs made of stainless steel■ Cable entry:

In IP44/IP67 IP67membrane cable gland

63A 17 – 31mm PG 36

125A 26 – 48mm PG 48

■ Connection terminals:❑ captive screws, completely loosened❑ maximum cross section of conductors:


63A 6 to 25mm2

125A 16 to 70mm2

Select and understand

81495



63A 2P+ 81478

3P+ 81476 81479 81482 81485

3P+N+ 81477 81480 81483 81486

125A 2P+ 81490

3P+ 81488 81491 81494 81497

3P+N+ 81489 81492 81495 81498

IP 67PK


Select and understand

IP 67rates poles and rated voltage


16A 2P+ 82251 82254 82257

3P+ 82252 82255 82258 82261

3P+N+ 82253 82256 82259 82262

32A 2P+ 82263 82266 82269

3P+ 82264 82267 82270 82273

3P+N+ 82265 82268 82271 82274



16A 2P+ 82201 82204 82207

3P+ 82202 82205 82208 82211

3P+N+ 82203 82206 82209 82212

32A 2P+ 82213 82216 82219

3P+ 82214 82217 82220 82223

3P+N+ 82215 82218 82221 82224

FunctionsThey can be wall-mounted to supply appliances with wander plugs. They have very compact dimensions.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials :❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ screws, pins and springs made of stainless steel■ Cable entry:


16A 8 – 15mm PG16 (PG21 5P)

32A 11.5 – 21mm PG 21



16A 1 to 4mm2

32A 2,5 to 10mm2

Small wall-mounted sockets

82204

82271

PK plugs and socketsLow voltageSmall wall-mounted sockets


Select and understand PK plugs and socketsLow voltageWall-mounted sockets



16A 2P+ 83101 83104 83107

3P+ 83102 83105 83108 83111

3P+N+ 83103 83106 83109 83112

32A 2P+ 83113 83116 83119

3P+ 83114 83117 83120 83123

3P+N+ 83115 83118 83121 83124

FunctionsThey can be wall-mounted to supply appliances with wander plugs.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67; 63 and 125A IP67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials :❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ screws, pins and springs made of stainless steel■ Cable entry:


16A 8 – 15mm PG16 (PG21 5P)

32A 11,5 – 21mm PG 21

63A PG 36

125A PG 48



16A 1 to 4mm2

32A 2,5 to 10mm2

63A 6 to 25mm2

125A 16 to 70mm2

Wall-mounted sockets

rates poles and rated voltage


16A 2P+ 83151 83154 83157

3P+ 83152 83155 83158 83161

3P+N+ 83153 83156 83159 83162

32A 2P+ 83163 83166 83169

3P+ 83164 83167 83170 83173

3P+N+ 83165 83168 83171 83174

63A 2P+ 81178

3P+ 81176 81179 81182 81185

3P+N+ 81177 81180 81183 81186

125A 2P+ 81190

3P+ 81188 81191 81194 81197

3P+N+ 81189 81192 81195 81198

IP 67

83104

83171

81195


Select and understand PK plugs and socketsLow voltagePanel-mounted angled socketsFAST connection, without screws

FunctionsThey can be mounted on a plate, panel or machine to supply appliance with wander plugs.

Characteristics■ Degree of protection, according to IEC 60529:❑ 16 and 32A IP44 and IP 67;■ Degree of protection against external mechanical impacts, according to EN 50102 :IK08■ Resistance to fire and abnormal heat, according to IEC/EN 60695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleeves made brass❑ pins and springs made of stainless steel❑ connection terminals:■ Fast connection without screws and without stripping the conductor❑ maximum cross section of conductors:


16A 1 to 4mm2

32A 2,5 to 10mm2

PK PratiKaPanel-mounted angled sockets


current wires dim. 100-130V 200-250V 380-415V 480-500V

16A 2P+ 65 x 85 PKY16F413 PKY16F423 PKY16F433

3P+ 65 x 85 PKY16F414 PKY16F424 PKY16F434 PKY16F444

3P+N+ 90 x 100 PKY16F415 PKY16F425 PKY16F435 PKY16F445




IP 44









IP 67

PKY16F423

PKY32F734


Select and understand PK plugs and socketsLow voltagePanel-mounted straight socketsFAST connection, without screws

FunctionsThey can be mounted on a plate, panel or machine to supply appliance with wander plugs.

Characteristics■ Degree of protection, according to IEC 60529:❑ 16 and 32A IP44 and IP 67;■ Degree of protection against external mechanical impacts, according to EN 50102 :IK08■ Resistance to fire and abnormal heat, according to IEC/EN 60695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleeves made brass❑ pins and springs made of stainless steel■ Connection terminals:❑ Fast connection without screws and without stripping the conductor❑ maximum cross section of conductors:


16A 1 to 4mm2

32A 2,5 to 10mm2

PK PratiKaPanel-mounted straight sockets



16A 2P+ 65 x 85 PKY16G713 PKY16G723 PKY16G733

3P+ 65 x 85 PKY16G714 PKY16G724 PKY16G734 PKY16G744

3P+N+ 90 x 100 PKY16G715 PKY16G725 PKY16G735 PKY16G745




IP 67


current wired dim. 100-130V 200-250V 380-415V 480-500V







IP 44

PKY16G423

PKY32G734


Select and understand PK plugs and socketsLow voltagePanel-mounted angled sockets

FunctionsThey can be mounted on a plate, panel or machine to feed appliances with wander plugs.

Characteristics■ Degree of protection, according to IEC 60529:❑ PK: 63 and 125A IP67■ Degree of protection against external mechanical impacts, according to EN 50102 :IK08■ Resistance to fire and abnormal heat, according to IEC/EN 60695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ pins and springs made of stainless steel■ Connection terminals:❑ captive screws, completely loosened❑ maximum cross section of conductors:


63A 6 to 25mm2

125A 16 to 70mm2

83271



63A 2P+ 100 x 107 81278

3P+ 100 x 107 81276 81279 81282 81285

3P+N+ 100 x 107 81277 83280 81283 81286

125A 2P+ 110 x 114 81290

3P+ 110 x 114 81288 81291 81294 81297

3P+N+ 110 x 114 81289 81292 81295 81298

IP 67

PK


Select and understand PK plugs and socketsLow voltagePanel-mounted straight sockets

FunctionsThey can be mounted on a plate, panel or machine to feed appliances with wander plugs.

Characteristics■ Degree of protection, according to IEC 60529:❑ PK: 63 and 125A IP67■ Degree of protection against external mechanical impacts, according to EN 50102 :IK08■ Resistance to fire and abnormal heat, according to IEC/EN 60695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ pins and springs made of stainless steel■ Connection terminals:❑ captive screws, completely loosened❑ maximum cross section of conductors:


63A 6 to 25mm2

125A 16 to 70m2

83671



63A 2P+ 100 x 107 81678

3P+ 100 x 107 81676 81679 81682 81685

3P+N+ 100 x 107 81677 81680 81683 81686

125A 2P+ 110 x 114 81690

3P+ 110 x 114 81688 81691 81694 81697

3P+N+ 110 x 114 81689 81692 81695 81698

IP 67


Discover PK plugs and socketsLow voltagePlugs and sockets for containers

The solution for safeconnections worldwide

The PK plugs and sockets for containers aredesigned to power refrigerated containers inports, railway stations, airports, as well as onboard container-ships.The IP67 protection, use of nickel-platedcontacts, stainless steel screws, pins andsprings and high performance plasticmaterials, combine in ensuring maximumprotection and guaranteed functioning also inhighly aggressive and corrosiveenvironments.In accordance with standards, these plugsand sockets are available in the followingversions:

❑ 32A - 3P+E❑ voltage rating 400-440V❑ clock-position 3 hours❑ degree of protection IP67

FunctionsThey are designed for supplying low-voltage power to loads or equipment .

■ PK PratiKa wander plugs■ PK 90° wander plugs■ PK wall mounted plugs■ PK panel-mounted plugs■ PK PratiKa wander sockets■ PK small wall-mounted sockets■ PK wall-mounted sockets■ PK PratiKa panel-mounted angled sockets■ PK PratiKa panel-mounted straight sockets■ interlocked sockets PK Unika■ interlocked sockets PK Unika with fuse protection■ interlocked sockets PK Isoblock with DIN rail.

Characteristics■ Degree of protection according to IEC 529:❑ 32A IP 67 (IP65 for interlocked sockets)■ Degree de protection against external mechanical impacts according to EN 50 102:❑ IK08 for plugs and sockets (IK09 for interlocked sockets)■ Resistance to fire and abnormal heat, according to: IEC 695-2-1: 850°C (750°C for PK Unika)■ Materials❑ housing made of self extinguishing polymer❑ pins made of nickel-plated brass❑ stainless steel screws■ Cable entry

In IP67 IP67cable gland cable clamp

32A PG21 PK 11,5 - 21mm PK PratiKa

■ Connection terminal:❑ captive screws, completely loosened❑ maximum cross section of conductors:


32A 2.5 to 10mm2 panel and wall version

2.5 to 6mm2 wander versions


Select and understand PK plugs and socketsLow voltagePlugs and sockets for containers

32A 3P+ 3h 400-440V 50-60 81799

90° Wander plugs IP 67

32A PK PratiKa FAST 3P+ 3h 400-440V 50-60 PKX32M7C4

rated Poles Clock Rated Freq. Code

current position voltage Hz

Wander plugs IP 67

Small wall-mounted sockets IP 6732A 3P+ 3h 400-440V 50-60 82299

32A PK PratiKa FAST 3P+ 3h 400-440V 50-60 PKY32G7C4

Panel-mounted straight sockets IP 67

Interlocked sockets PK Unika with fuse carriers IP 65

Interlocked sockets PK Isoblock with rail DIN IP 6532A 3P+ 3h 400-440V 50-60 83799

Wall-mounted sockets IP 6732A 3P+ 3h 400-440V 50-60 81199

Intelocked sockets PK Unika IP 6532A 3P+ 3h 400-440V 50-60 83299

32A PK PratiKa FAST 3P+ 3h 400-440V 50-60 PKY32F7C4

Panel-mounted angled sockets IP 67

32A 3P+ 3h 400-440V 50-60 83399

Wander sockets IP 6732A PK PratiKa FAST 3P+ 3h 400-440V 50-60 PKY32M7C4

Wall mounted plugs IP 6732A 3P+ 3h 400-440V 50-60 81599

Panel-mounted plugs IP 6732A 3P+ 3h 400-440V 50-60 83899

Caps for plugs 83936

IndexGeneral presentation 34Selection guide 36Wander plugs 38Wall-mounted plugs 39Wander sockets 40Wall-mounted sockets 41Panel-mounted sockets 42

PK plugs and socketExtra low voltage


Discover PK plugs and socketsExtra low voltageGeneral presentation

A complete range of productsto supply circuits with risksof direct and indirect contactwith live parts.

The PK range of extra low voltage plugs andsockets is designed mainly for thoseapplications requiring extra low voltagepower, as in the case of installations inespecially damp environment or areas wherethere is risk of fire or explosions. Theseproducts are in conformity with the EuropeanIEC 309-1 and IEC 309-2 standards.

This particularly completerange of plugs, which are solid,well-sealed and resistant tochemical agents, has beendeveloped thanks toSchneider Electric’s experienceand knowhow.

❑ Very high performance products❑ Easy installation❑ A complete range

TechnicalcharacteristicsThe PK plugs andextra-low voltageplugs and socketshave been designedto resist atmosphericand chemical agents:❑ IK08 shock

resistance❑ Plastic materials

suitable for highlytechnicalapplications

❑ Nickel-plated brasspins and sleeves

❑ Stainless steelscrews

A completerangeThe PK rangecomprises highlypractical 16 and 32Adifferent versions, inconformity withstandards:❑ Wander plugs and

sockets❑ Wall-mounting

plugs and sockets❑ Panel-mounting

plugs and sockets❑ Available in

different number ofpole (2P and 3P)

EasyinstallationThe PK sockets aresuitable for anyconfiguration:❑ Wall-mounted near

the load❑ Wander version for

flexible feedercable connection

❑ Direct mounting orthrough enclosureor via the Kaedraenclosures orUnika interface


Discover PK plugs and socketsExtra low voltageGeneral presentation

Product rangeThe PK extra low voltage sockets and plugsensure the non-interchangeability by meansof two reference elements:❑ a guide spline on the socket which

matches with a corresponding nib on theplug, always at a fixed 6 o’clock position

❑ a secondary keyway, also this a spline onthe socket, to which corresponds a nib onthe plug, at different clock positionsaccording to the operating characteristics.

The clock position (h) of the secondarykeyway is checked by observing, with thesocket viewed from the front, the position ofthe nib in relation to the main keyway, alwayspositioned at 6 o’clock, in accordance withthe IEC 309-1 and IEC 309-2 standard.

Sockets with safetytransformersSockets with safety transformers are used topower circuits with a voltage rating of 50Vmaximum, in order to protect people fromdirect and indirect contact, in conformity withIEC364 standards.The units integrate the socket, the powertransformer and the transformer protectionfrom any overloading.They are available in different versions tomeet the needs of the various distributionenvironments:

❑ PK Unika Series, for any tertiary andindustrial plants and, especially, forcombined use with other power systemsinstalled in different ways: one by one,through modular bases or on Kaedrasystem socket enclosures;

❑ PK Isoblock Series, for installations inheavy industry or agriculturalenvironments, where they are exposed toaggressive chemical agents, oils andgrease and frequent jets of water oraccidental shocks.


Select and understand PK plugs and socketsExtra low voltageSelection guide

Other device types, not indicated, are available on request.

Rated Poles and Frequency Rated Clock position Wander plugs Wall-mounted

current wires voltage of secondary plugs

A Hz V keyway IP 44 IP 67 IP 44

2P 50/60 20-25V s.r. 82301 82351 82501

3P 50/60 s.r. 82302 82352 82502

2P 50/60 40-50V 12h 82303 82353 82503

3P 50/60 12h 82304 82354 82504

16A 2P 100-200 20-25V & 40-50V 4h 82305 82355 82505

3P 100-200 4h 82306 82356 82506

2P 401-500 20-25V & 40-50V 11h 82311 82361 82511

3P 401-500 11h 82312 82362 82512

2P _ _ _ 20-25V & 40-50V 10h 82313 82363 82513

2P 50/60 20-25V s.r. 82315 82365 82515

3P 50/60 s.r. 82316 82366 82516

2P 50/60 40-50V 12h 82317 82367 82517

3P 50/60 12h 82318 82368 82518

32A 2P 100-200 20-25V & 40-50V 4h 82319 82369 82519

3P 100-200 4h 82320 82370 82520

2P 401-500 20-25V & 40-50V 11h 82325 82375 82525

3P 401-500 11h 82326 82376 82526

2P _ _ _ 20-25 V & 40-50V 10h 82327 82377 82527

Rated Rated voltage PK unika PK Unika

power primary secondary Number and type of Panel mounted version Wall-mounted version

VA sockets IP 44 IP65 IP 44 IP 65

230V 24V 1 x 2P 16A 82026 82076 83026 83076

400V 24V 1 x 2P 16A 82027 82077 83027 83077160VA

230V 24V

400V 24V

PK plugs and socketsIEC 309-1 and IEC 309-2

PK sockets with safety transformerIEC 309-1 and IEC 309-2

PK Unika


Wander sockets Wall-mounted sockets Panel-mounted straight sockets

flange 65 x 65

IP 44 IP 67 IP 44 IP 67 IP 44 IP 67

82401 82451 82101 82151 82901 82951

82402 82452 82102 82152 82902 82952

82403 82453 82103 82153 82903 82953

82404 82454 82104 82154 82904 82954

82405 82455 82105 82155 82905 82955

82406 82456 82106 82156 82906 82956

82411 82461 82111 82161 82911 82961

82412 82462 82112 82162 82912 82962

82413 82463 82113 82163 82913 82963

82415 82465 82115 82165 82915 82965

82416 82466 82116 82166 82916 82966

82417 82467 82117 82167 82917 82967

82418 82468 82118 82168 82918 82968

82419 82469 82119 82169 82919 82969

82420 82470 82120 82170 82920 82970

82425 82475 82125 82175 82925 82975

82426 82476 82126 82176 82926 82976

82427 82477 82127 82177 82927 82977

PK Isoblock

Number and type of Wall-mounted version

sockets IP 65

1 x 2P 16A 82061

1 x 2P 16A 82063

2 x 2P 16A 82062

2 x 2P 16A 82064

PK Isoblock


Select and understand PK plugs and socketsExtra low voltageWander plugs

FunctionsInstallations and wander sockets can be powered by a flexible cable.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ pins made of nickel-plated brass❑ stainless steel screws■ Cable entry:


16A 6 – 23mm Pg 21

32A 6 – 23mm PG 21

■ Connection terminals❑ captive screws, completely loosened❑ maximum cross section of conductors:


16A 4 to 10mm2

32A 4 to 10mm2

Wander plugs


current wires 20-25V 40-50V 20-25V/40-50V 20-25/40-50V50/60Hz 50/60Hz 100-200Hz 401-500Hz _ _ _

16A 2P 82301 82303 82305 82311 82313

3P 82302 82304 82306 82312

32A 2P 82315 82317 82319 82325 82327

3P 82316 82318 82320 82326

IP 44

rated poles and rated voltagecurrent wires 20-25V 40-50V 20-25V/40-50V 20-25/40-50V

50/60Hz 50/60Hz 100-200Hz 401-500Hz _ _ _

16A 2P 82351 82353 82355 82361 82363

3P 82352 82354 82356 82362

32A 2P 82365 82367 82369 82375 82377

3P 82366 82368 82370 82376

IP 67

82301

82368


Select and understand PK plugs and socketsExtra low voltageWall-mounted plugs

FunctionsThey can be wall-mounted to supply appliances with wander sockets.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ pins made of nickel-plated brass❑ stainless steel screws■ Cable entry:


16A 6 – 23mm PG21

32A 6 – 23mm PG21

■ Connection terminals❑ captive screws, completely loosened❑ maximum cross section of conductors :

In stranded wire flexible cables:

16A 4 to 10mm2

32A 4 to 10mm2

Wall-mounted plugs



16A 2P 82501 82503 82505 82511 82513

3P 82502 82504 82506 82512

32A 2P 82515 82517 82519 82525 82527

3P 82516 82518 82520 82526

IP 44

82501


Select and understand PK plug and socketsExtra low voltageWander sockets


Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ screws, pins and springs made of stainless steel■ Cable entry:


16A 6 – 23mm PG21

32A 6 – 23mm PG21



16A 4 to 10mm2

32A 4 to 10mm2

Wander sockets


50/60Hz 50/60Hz 100-200Hz 401-500Hz _ _ _

16A 2P 82401 82403 82405 82411 82413

3P 82402 82404 82406 82412

32A 2P 82415 82417 82419 82425 82427

3P 82416 84518 82420 82426

IP 44



16A 2P 82451 82453 82455 82461 82463

3P 82452 82454 82456 82462

32A 2P 82465 82467 82469 82475 82477

3P 82466 82468 82470 82476

IP 67

82402

82468


Select and understand PK plugs and socketsExtra low voltageWall-mounted sockets

FunctionsThey can be wall-mounted to supply appliances with wander plugs.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ screws, pins and springs made of stainless steel■ Cable entry:


16A 6 – 23mm PG21

32A 6 – 23mm PG 21



16A 4 to 10mm2

32A 4 to 10mm2

Wall-mounted sockets


50/60Hz 50/60Hz 100-200Hz 401-500Hz _ _ _

16A 2P 82101 82103 82105 82111 82113

3P 82102 82104 82106 82112

32A 2P 82115 82117 82119 82125 82127

3P 82116 84118 82120 82126

IP 44



16A 2P 82151 82153 82155 82161 82163

3P 82152 82154 82156 82162

32A 2P 82165 82167 82169 82175 82177

3P 82166 82168 82170 82176

IP 67

82101

82168


Select and understand PK plug and socketsExtra low voltagePanel-mounted sockets

FunctionsThey can be mounted on a plate, panel or machine to supply appliances with wander plugs.

Characteristics■ Degree of protection, according to IEC 529:❑ 16 and 32A IP44 and IP 67■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Materials :❑ housing made of self-extinguishing engineering polymer❑ sleeves made of nickel-plated brass❑ screws, pins and springs made of stainless steel■ Connection terminals❑ captive screws, completely loosened❑ maximum cross section of conductors :

In stranded wire flexible

16A 1 to 2.5mm2

32A 2.5 to 6mm2

Panel-mounted socketsflange 65 x 65mm


50/60Hz 50/60Hz 100-200Hz 401-500Hz _ _ _

16A 2P 82901 82903 82905 82911 82913

3P 82902 82904 82906 82912

32A 2P 82915 82917 82919 82925 82927

3P 82916 84918 82920 82926

IP 44



16A 2P 82951 82953 82955 82961 82963

3P 82952 82954 82956 82962

32A 2P 82965 82967 82969 82975 82977

3P 82966 82968 82970 82976

IP 67

82901

82954

PK sockets withinterlock switch

IndexGeneral presentation 44Selection guide 46PK Unika series 48PK Isoblock series 56


Discover PK sockets with interlock switchGeneral presentation

A complete range in order toguarantee safety, reliabilityand functionality

PK sockets with interlocked switch areavailable in three different ranges of solutionsto meet the various installation and protectionneeds depending on different installationenvironments.

A very versatile range, rich infunctional characteristics, easyinstallation and guaranteeingmaximum safety, and suitablefor the most specificrequirements.

❑ PK Compact: small and compact;❑ PK Unika: highly functional features and

very versatile installation system;❑ PK Isoblock: for installation in high-risk

areas

SafetyIn conformity with IEC 309 standards, all the industrial sockets havea lock or holding mechanism, which keeps the plug firmly locked inthe socket, preventing it from being pulled out involuntarily.Sockets with an interlock switch have been designed to meet thesafety requirements and, in particular, to prevent plug insertion orremoval while the socket is under load.Their interlocking device allows closure of the main switch only whenthe plug is fully inserted in the socket, and when completemechanical and electrical connection has occurred between thesleeves and pins.Plug removal is possible only when the switch is in the ‘off’ position.The use of these interlocked sockets is recommended where there isa risk associated with connecting and disconnecting plugs on load. Inthis way the user has the guarantee that current can only beswitched under optimum safety conditions with the plug correctlyinserted.


Discover PK sockets with interlock switchApplications

Domain of applicationsInterlocked sockets can be employed in variousdifferent sectors, for example:

Tertiary:❑ bars, shops, supermarkets, for powering small

electrical appliances (refrigerator, ovens, fryers,blenders, ...), machines and fixed or mobilelighting equipment.

❑ large shopping centres, exhibition centres,television studios, film studios, swimming-pools,fitness centres, for powering fixed or mobilelighting equipment.

Industry:for powering all kinds of fixed and mobilemachines and on machinery in the followingsectors:❑ craftsmen and small industries : workshops,

car-repair garages, printing works, carpentryworkshops, etc.

❑ industry: textile manufacture, mechanical andplastic production processes, industrialprocesses, technical environments,warehouses, etc.

Construction sites:fixed or mobile machinery and equipment in:❑ buiding sites (cement-mixer crane, electric saws,

pneumatic drills, etc. ...),❑ shipyards, ports, docks, wharves and tourist ports

(equipment for welding, drilling, riveting, etc. ...)

Agriculture:fixed or mobile machinery and equipment (chickencoops, barns, hot houses, cowsheds, stables andpigsties, ...)

Heavy industry:for powering all kinds of fixed and mobilemachines in major industry with hazardousenvironments as regards danger of explosion, fiveand mechanical stress (chemical, oil and ironsteel) infrastructures, where the are particularlyharsh environmental conditions.

Applications standardsInstallation regulations may require thecompulsory use of sockets with interlock switch inthe following cases:❑ public entertainment and meeting rooms, for

current over 16A;❑ environments where there is danger of

explosions and fire, in conformity with IEC 64-2standard.

Besides all the other cases provided by thestandards, the use of interlocked sockets isnecessary in applications where:❑ the occurrence of electric arcs could cause

explosions and fires;❑ operator inexperience could give rise to

hazardous situations;❑ in the event of operations needing to be

performed in the presence of short circuits.


Select and understand PK sockets with interlock switchSelection guide

Rated Poles and Frequency Rated Clock positionnominal wires voltage of contact

A Hz V IP 44 IP 55

2 P+ 50/60 4h 82028 820783 P+ 50/60 100-130V 4h 82029 820793 P+N+ 50/60 4h 82030 82080

2 P+ 50/60 6h 82031 820813 P+ 50/60 200-250V 9h 82032 82082

16A 3 P+N+ 50/60 9h 82033 82083

2 P+ 50/60 9h 82034 820843 P+ 50/60 380-415V 6h 82035 820853 P+N+ 50/60 6h 82036 82086

3 P+ 50/60 480-500V 7h 82037 820873 P+N+ 50/60 7h 82038 82088

2 P+ 50/60 4h 82039 820893 P+ 50/60 100-130V 4h 82040 820903 P+N+ 50/60 4h 82041 82091

2 P+ 50/60 6h 82042 820923 P+ 50/60 200-250V 9h 82043 82093

32A 3 P+N+ 50/60 9h 82044 82094

2 P+ 50/60 9h 82045 820953 P+ 50/60 380-415V 6h 82046 820963 P+N+ 50/60 6h 82047 82097

3 P+ 50/60 480-500V 7h 82048 820983 P+N+ 50/60 7h 82049 82099

3 P+ 50/60 100-130V 4h3 P+N+ 50/60 4h

2 P+ 50/60 6h3 P+ 50/60 9h

63A 3 P+N+ 50/60 9h

3 P+ 50/60 380-415V 6h3 P+N+ 50/60 6h

3 P+ 50/60 480-500V 7h3 P+N+ 50/60 7h

PK sockets with interlock switchIEC 309-1 and IEC 309-2

Rated Number Rated voltagepower and type primary secondaryVA of sockets V V IP 44 IP 65

16A 1 x 2P 16A 230V 24V 82026 82076

1 x 2P 16A 400V 24V 82027 82077

PK sockets with safety transformerIEC 309-1 and IEC 309-2

Wall and embedded box

Number Embeddedof sockets box

1 839241 unmarked walls1 wall with knock-outs1 with junction box2 with junction box3 with junction box

PK UnikaPanel-mounted version


PK UnikaWall-mounted version

PK IsoblokWall-mounted version

with DIN rail

4.5 modules 6 modulesIP44 IP65 IP65 IP65

83028 83078 82751 ▲83029 83079 82752 ▲83030 83080 82753 ▲

83031 83081 82754 ▲83032 83082 82755 ▲83033 83083 82756 ▲

83034 83084 82757 ▲83035 83085 82758 ▲83036 83086 82759 ▲

83037 83087 82761 ▲83038 83088 82762 ▲

83039 83089 83788 ▲ 82763 ●

83040 83090 83789 ▲ 82764 ●

83041 83091 83790 ▲ 82765 ●

83042 83092 83791 ▲ 82766 ●

83043 83093 83792 ▲ 82767 ●

83044 83094 83793 ▲ 82768 ●

83045 83095 83794 ▲ 82769 ●

83046 83096 83795 ▲ 82770 ●

83047 83097 83796 ▲ 82771 ●

83048 83098 83797 ▲ 82773 ●

83049 83099 83798 ▲ 82774 ●

82778 ●

82777 ●

82776 ●

82779 ●

82780 ●

82782 ●

82783 ●

82785 ●

82786 ●

IP44 IP65 IP65 IP65

83026 83076 1P 82061 ● 82062 ●

83027 83077 2P 82063 ● 82064 ●

Modular basis Modular panelswall mounting Numberbox and type with junction with modular

sockets box enclosures1 x B16 ▲ 83925 ▲ 83325

83919 2 x B16 ▲ 83926 ▲ 8332683920

83921 1 x 32/63 ● 83927 ● 8332783922

83923 ▲ = Sockets 106mm width ● = Sockets 144mm width


Discover PK sockets with interlocked switchPK UnikaGeneral presentation

A complete range of solutionsin one standard size

The new range of PK Unika sockets withinterlocked switch has been designed toprovide a complete range of interlockedsockets in different versions, in terms of leveland type of protection, all having unifiedstandard sizes in order to permit quickinstallation, and combined fitting on emptyenclosures with a standard 103x225 opening.

Compact, unified sizes, versionswith IP44 and IP65protection, panel and wall-mounted, with or withoutintegrated protection, allsockets provide quick solutionsto the most demandingapplications.

The only complete, unique industrial socketinstallation system, with guaranteed IP65protection.Unique because of the following:❑ one standard size 103 x 225mm❑ for 16 and 32A sockets❑ for IP44 and IP65 versions❑ for versions with isolation transformers❑ fitted wall-mounted, used individually, in

combination or in the Kaedra system.

SafetyThe PK Unika seriesof interlocked socketsare equipped with amechanical switch,which ensures thecontrol and localisolating of parts ofthe plant or utilities topermit intervention onelectrical circuits ormachines in totalsafety.The sockets are inconformity with IEC309-2 standards.

HighresistanceAll housings of the PKUnika interlockedsocket series provideguaranteed IP44 andIP65 protectionagainst thepenetration of solidsand liquids, inconformity with theIEC 529 and EN 60529 standards, whileresistance tomechanical shocks iscovered by IK09protection, inconformity with EN 50102 standards. Thestructure andsupporting frame ofthe equipmentcompletely separatedfrom the housing andthe double walls,contribute to greatlyincreasing themechanicalresistance.


Discover PK sockets with interlocked switchPK UnikaKey points

Compact sizeAll the PK Unika sockets with interlockedswitch come in one standard size of 103 x225mm, which makes them the mostcompact currently available on the market,guaranteeing at the same time ultra-highperformance in terms of safety andfunctionality.

Differentiated functions inone single sizeThe PK Unika socket series are available indifferent versions, either with IP44 or IP 65protection, as follows:❑ version with safety lock switch❑ version for extra-low voltage with 160VA

isolation transformer.All are characterized by the same dimensionand, therefore, can be easily interchanged onthe 103x225 holes.

DesignDesign is another important aspect of thisnew range. Developed following carefulstudies both on aesthetics and ergonomy, therange includes modern shapes designed forapplications in the tertiary sector as well as inpublic areas without spoiling the architecturalsurroundings with purely technologicalfeatures.

Kaedra Systemand modular basesPK Unika series sockets can be installedeither on single enclosures or modularbases, and can be combined to formcomplete, totally protected banks. Also, theycan be fitted on a new range of Kaedrasystem socket panels designed specificallyfor PK Unika, enabling the construction ofinterlocked socket panels with the possibilityof differential protection integrated as a mainswitch in the modular section of the panel.


Select and understand PK sockets with interlocked switchPK UnikaPanel-mounted and wall-mounted version

Wall-mounted PK Unika sockets

16A 2P+ 83078 83081 83084

3P+ 83079 83082 83085 83087

4P+ 83080 83083 83086 83088

32A 2P+ 83089 83092 83095

3P+ 83090 83093 83096 83098

4P+ 83091 83094 83097 83099

IP 65



16A 2P+ 83028 83031 83034

3P+ 83029 83032 83035 83037

4P+ 83030 83033 83036 83038

32A 2P+ 83039 83042 83045

3P+ 83040 83043 83046 83048

4P+ 83041 83044 83047 83049

IP 44

16A 2P+ 82078 82081 82084

3P+ 82079 82082 82085 82087

4P+ 82080 82083 82086 82088

32A 2P+ 82089 82092 82095

3P+ 82090 82093 82096 82098

4P+ 82091 82094 82097 82099

IP 65



16A 2P+ 82028 82031 82034

3P+ 82029 82032 82035 82037

4P+ 82030 82033 82036 82038

32A 2P+ 82039 82042 82045

3P+ 82040 82043 82046 82048

4P+ 82041 82044 82047 82049

IP 44

Panel-mounted PK Unika sockets

Their technical, functional and aestheticqualities make them particularly suitablefor installation in the tertiary andindustry sectors.

Characteristics■ the switch is designed for utilisation category AC 22A■ the switch can be externally padlocked into position «0» and «1»■ degree of protection, according to IEC 529: IP44 and IP65■ degree of protection against external mechanical impacts, according to EN 50 102: IK09■ resistance to fire and abnormal heat, according to IEC 695-2-1: 750°C (glow wire test)■ Materials:❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ screws, pins and springs made of stainless steel■ Connection terminals:❑ captive screws❑ maximum cross section of conductors: 10mm2

■ Wall-mounted version:❑ cable entry from the top❑ complete with membrane for 25mm Max. diameter cables and conduits, and/or PG21 cable

gland

82031

82041

83031

83041


Select and understand PK sockets with interlocked switchPK UnikaSockets with safety transformer SELVPanel-mounted and wall-mounted version

Units fitted with safety transformers, inconformity with IEC742 standards.

FunctionsTheir modular size enables them to be used with all the components of the PK Unika series.They are used to power circuits with a voltage rating of 50V maximum, to protect users againstdirect and indirect contact, in conformity with IEC364 standards.

Characteristics■ Transformer with rated power 160VA, continuous use■ Operating voltage 230:24V and 400/24V■ Transformer protected against short-circuit by the cylindrical fuses supplied■ Power supply switch on the primary controlled by a special mechanism upon the insertion of the

plug■ Degree of protection, according to IEC 529: IP44 and IP65■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK09■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 750°C (glow wire test)■ The unit is rated as Class II-according to EN 60742■ Material❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ screws pins and springs made of stainless steel■ Connection terminals:❑ captive screws❑ maximum cross section of conductors: 6mm2

■ Available as follows:❑ fitted with one very-low-voltage IEC 309 socket, 24V 2P❑ wall-mounted❑ complete with membrane for 25mm Max. diameter cables and conduits, and/or PG21 cable

gland❑ supplied with screw head cover

Wall-mounted PK Unika with safety transformer

IP 44rated rated voltage number and type Codepower primary secondary of sockets

160VA 230V 24V 1 x 16A 83026

400V 24V 1 x 16A 83027


160VA 230V 24V 1 x 16A 83076

400V 24V 1 x 16A 83077


160VA 230V 24V 1 x 16A 82026

400V 24V 1 x 16A 82027


160VA 230V 24V 1 x 16A 82076

400V 24V 1 x 16A 82077

Panel-mounted PK Unika with safety transformer

82026

83026

83076

82076


Discover PK sockets with interlocked switchPK UnikaInstallation flexibility

Unique size: 103x225mm

Functional platesPK Unika sockets

With safetytransformer

blank For socketsPK 16 & 32A

For socketsPK 63A

Enclosures Modular bases Kaedra system: Enclosures for PK Unika sockets


Installation flexibilityThe PK Unika sockets with interlocked switchare suitable for wall and flush mounting orpanel mounting. The offer contains acomplete range of enclosures for differentinstallations: individual or in combination inbanks.Its compact size permits boards with smalloverall dimensions.The PK Unika sockets are equiped with thenew five thread which enables a fast fixing onall enclosures.

Discover PK sockets with interlocked switchPK UnikaInstallation flexibility


Select and understand PK sockets with interlocked switchPK UnikaWall and flush mounting boxes

These can be fitted either wall-mounted orflush mounting or in the PK Unika seriesinterlocked socket panels.

Wall-mounting boxFunctionsThey enable wall-mounted installation of sockets with interlock or safety transformers. On theupper part there is a section with a small cover giving additional cabling space.

Characteristics■ Degree of protection, according to IEC 529: IP65■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK09■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 750°C (glow wire test)■ Complete insulation characteristics in according with EN 60439-1■ Materials :❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ stainless steel screws■ Cabling :❑ cable entry from the top❑ membrane for 25mm max.diameter cables and conduits❑ version with knockout holes, 28.5mm diam. for association❑ supplied with screw head covers

Wall-mounting box

Dimensions degree of codeL H P protection

103 250 70 IP65 with plain walls 83919

103 250 70 IP65 walls with knock-outs 83920

Flush mounting boxFunctionsThey enable flush or panel-mounted installation of sockets with interlock or safety transformers.

Characteristics■ Degree of protection, according to IEC 529: IP55■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 750°C (glow wire test)■ Materials :❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ stainless steel screws

Flush mounting box

Dimensions degree of CodeL H P protection

103 235 70 IP65 83924

83919

83924


Select and understand PK sockets with interlocked switchPK UnikaModular bases

For wall-mounted fitting in combinationsof one or more PK Unika seriesinterlocked sockets and other PK seriessockets.

Modular bases

Dimensions degree off number of CodeH L P protection sockets

350 105 70 IP65 1 83921

350 210 70 IP65 2 83922

350 315 70 IP65 3 83923

FunctionsThey enable wall-mounted fitting of sockets with interlock or safety transformers. On the upper partthere is a box incorporated designed for easy power feeding and wiring distribution.

Characteristics■ Degree of protection, according to IEC 529: IP65■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK09■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 650°C (glow wire test)■ Complete insulation characteristics in according with EN 60439■ Materials :❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ stainless steel screws■ Cabling :❑ cable entry from the top❑ membrane for 25mm max.diameter cables and conduits❑ version with knockout holes, 28.5mm diam. for association❑ supplied with screw head covers

Functional platesFor closing the openings 103 x 225 of different PK Unika and Kaedra system enclosures

Description Code

Blank plates 13143marked for fixing:- panel mounted straight PK sockets for low and extra-low voltage with flange65 x 65mm or 75 x 75mm- 1 or 2 devices diam. 22.2mm.

Plates with 2 openings 13142- 1 of 65 x 85mm for direct fixing of angled PK sockets 16A 2P+ and

3P+ or domestic sockets- 1 of 90 x 100mm for direct fixing of angled PK sockets 16A 4P+ and 32A

Plates with 1 opening 13144107 x 114mm for direct fixing of angled or straight PK sockets 63A

For other plates see page 71.

Modular bases auxiliary components

Description Code

Joining kit for modular basis and boxes 13934with 2 niples and nuts diam. 32mm

83921

83922

83923

13143

13142

13144


Discover PK sockets with interlocked switchPK IsoblockGeneral presentation

A complete range for heavy-duty applications

The range of PK Isoblock is designed forinstallations of interlocked sockets up to125A in heavy stress environments such asthe industrial sector or infrastructures, wherethere is exposure to liquids, mechanicalshocks and aggressive chemicals.Their sizeenables combinations to be made byspecial modular bases, in order to providecomplete socket banks that are totallyprotected and easily extendable.

IP65 protection, IK10 shock-resistance, high resistance toaggressive chemical andatmospheric agents, specificallydesigned for heavy-dutyapplications.

SafetyThe PK Isoblockseries interlockedsockets are equippedwith a mechanicalswitch, whichensures the controland local isolating ofparts of the plant orutilities in order toenable switching ofelectrical circuits ormachines in totalsafety.

ResistanceThe PK Isoblockseries interlockedsockets, which aremade of specialtechno-polymers,provide ultra-highresistance toaggressive chemicaland atmosphericagents andguarantee maximumprotection even indifficult, hazardousenvironments.

ProtectionThe PK Isoblockseries provideguaranteed IP65protection against thepenetration of solidsand liquids, inconformity with theIEC 529 standards,while resistance tomechanical shocks iscovered by IK10protection, inconformity with EN50 102 standards.


Discover PK sockets with interlocked switchPK IsoblockKey points

Differentiated functionsThe PK Isoblock interlocked sockets areavailable:❑ version with DIN rail for installing any kind

of modular equipment.

Modular panelsThe cover of each individual interlockedsocket can be easily removed enablingaccess for wiring and interconnections.For the installation of associated interlockedsockets, modular panels are available ready-equipped with an junction box or modularenclosures.

Socket combinationsThe PK Isoblock interlocked socketcombinations consist of complete distributionunits characterized by the high performanceof the different sockets and, therefore, areintended for installation in hazardousenvironments.They are easily combined with theconnection devices supplied with each panel.


Select and understand PK Sockets with interlock switchPK IsoblockWith DIN railWall-mounted version

Thanks to their high performances theyare intended for installation inenvironments where there are aggressivechemical agents, oils and grease, andfrequent jets of water or accidental knocks.

FunctionsThey have a DIN rail for modular protection devices.

Characteristics■ The switch is designed for utilisation category AC 22A■ The switch can be externally padlocked into position « 0 » and « 1 »■ Compartment for modular devices fitted with symmetrical DIN rail, with opening of :❑ 4,5 modules 18mm for 16 and 32A❑ 6 modules 18mm for 32 and 63A■ Access lid can be opened only with the switch in position “0”■ Degree of protection, according to IEC 529: IP65■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK10■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Operating temperature range : -25 +80°■ Materials :■ Housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ screws, pins and springs made of stainless steel■ Connection terminals :❑ captive screws❑ maximum cross section of conductors:❑ 16 and 32A 10mm2

❑ 63A 35mm2

❑ wall-mounted version :❑ cable entry from the top❑ complete with membrane for 25mm Max. Diameter cables and conduits, and/or PG 21 cable

gland for 16A and 32A versions, PG 29 for 63A version❑ screw head plugs

PK Isoblock sockets with DIN rail – 6 modules

PK Isoblock sockets with DIN rail – 4,5 modulesIP 65rated number of type rated voltage V

current sockets 100-130V 200-250V 380-415V 480-500V

16A 2P+ B16 82751 82754 82757

3P+ B16 82752 82755 82758 82761

4P+ B16 82753 82756 82759 82762

32A 2P+ B16 83788 83791 83794

3P+ B16 83789 83792 83795 83797

4P+ B16 83790 83793 83796 83798

IP 65rated number of type rated voltage V


32A 2P+ B32/63 82763 82766 82769

3P+ B32/63 82764 82767 82770 82773

4P+ B32/63 82765 82768 82771 82774

63A 2P+ B32/63 82778

3P+ B32/63 82776 82779 82782 82785

4P+ B32/63 82777 82780 82783 82786

82754

82771

82783


Select and understand PK sockets with interlocked switchPK IsoblockSockets with safety transformer SELVWall-mounted version

For use either singly or in combinationunits by means of the PK Isoblocksectional panels, in environments wherethere are aggressive chemical agents, oils,grease, frequent, heavy jets of water andaccidental knocks.

FunctionsThese enable powering of circuits with a voltage rating of 50V maximum, to protect users againstdirect and indirect contact, in conformity with IEC364 standards.

Characteristics■ Transformer with rated power of 160VA continuous rating■ Operating voltage 230/24V and 400/24V■ Transformer protected against short-circuit by the cylindrical fuses supplied■ Power supply switch on the primary controlled by a special mechanism upon the insertion of the

plug■ Degree of protection, according to IEC 529: IP65■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK10■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ The unit is rated as Class II according to EN 60742■ Fitted with one or two very-low voltage sockets, 24V, 2P■ Materials :❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ screws, pins and springs made of stainless steel■ Connection terminals:❑ captive screws❑ maximum cross section of conductors 6mm2

■ Wall-mounted❑ complete with membrane for 25mm Max. diameter cables and conduits, and/or PG 21 cable

glands❑ supplied with screw head cover


160 VA 230V 24V 1 x 16A 82061

400V 24V 1 x 16A 82063

160 VA 230V 24V 2 x 16A 82062

400V 24V 2 x 16A 82064

PK Isoblock sockets with safety transformer SELV

82061

82062


Select and understand PK sockets with interlocked switchPK IsoblockModular panels

For the installation of PK Isoblock seriesinterlocked sockets in environments wherethere are aggressive chemical agents, oilsand grease, frequent, heavy jets of wateror accidental knocks

FunctionsThese enable wall-mounted fitting of sockets with interlock or safety transformers and are availablein two versions:– version with integrated box designed to enable power feeding and wiring distribution;– version with control box designed to accommodate one or more modular protection devices

fitted to the symmetrical DIN rail

Characteristics■ Degree of protection, according to IEC 529: IP65■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK10■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Complete insulation characteristics in according with EN 439-1■ Materials :❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ screws made of stainless steel❑ walls with knockout for cable entry from the top❑ screw head plugs

Modular panels with junction boxes

Dimensions type number of CodeH L P sockets

535 111 11 + 65 B16 1 83925

535 222 17 + 100 2B16 2 83926

535 151 17 + 100 B32/63 1 83927

Modular panels with DIN modular enclosures

Dimensions type module dissipated number CodeH L P 18 mm power of sockes

535 111 11 + 65 B16 4 9 watt 1 83325

535 222 17 + 100 2B16 10 14 watt 2 83326

535 151 17 + 100 B32/63 6 11 watt 1 83327

83925 83926 83927

83325 83326 83327


Select and understand PK sockets with interlocked switchPK IsoblockSockets with safety switchand electrical interlock

These are characterised by a thermalmagnetic or thermal magnetic differentialprotection switch which is activated onlywhen the plug is fully inserted in thesocket. If the plug is removed while underload, the switch will open automatically.

Characteristics■ Box-type automatic thermal magnetic protection, with or without differential relay■ Rotary switch which can be extarnally padlocked into position “0” and “1”■ Reset of the switch from the outside when triggered■ Socket fitted with pilot contact for controlling the 24V electrical interlock■ Differential relay :❑ Ian setting to : 0,1A – 1A and 3A❑ timing: 0 to 1 sec.❑ red warning light to signal operation of the differential relay■ Degree of protection, according to IEC 529: IP65■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 960°C (glow wire test)■ Materials :❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ screw made of thermoplastic material■ Connection terminals :❑ captive screw❑ maximum cross section of conductors: 70mm2

❑ cable entry from the top❑ complete with thickness flange and PG 42 cable gland❑ terminal block guard at the switch entry

Interlocked socket with automatic thermal magnetic protection

rated number of rated voltage V


63A 3P+ 82979 82982 82985

4P+ 82983

125A 3P+ 82991 82994 82997

4P+ 82995

IP 65

Interlocked socket with automatic thermal magnetic anddifferential protection

rated number Type rated voltage V

current of sockets 100-130V 200-250V 380-415V 480-500V

63A 3P+ 82932

4P+ 82933

125A 3P+ 82944

4P+ 82945

IP 65

Safety switch characteristics

rated thermal magnetic rated voltage Vcurrent range setting 220-240V 380-415V 500V

63A 45-63A 750A 100 kA 25 kA 10 kA

125A 90-125A 1.200A 100 kA 25 kA 10 kA

L1 L2 L3 N

24 V ca

CP

Plug

Cable

Wandersocket

CP

U V W N CP

Socket CEEwithdifferential

Extension

Appliance

R

relay

L1 L2 L3 N

24 V ca

CP

Plug

Cable

Wandersocket

CP

U V W N CP

Socket CEEwithelectricalinterlock

Extension

Appliance


Select and understand PK sockets with interlocked switchPK IsoblockAccessories

Junction boxesCharacteristics■ Degree of protection, according to IEC 529: IP55■ Degree of protection against external mechanical impacts, according to EN 50 102 :IK08■ Resistance to fire and abnormal heat, according to IEC 695-2-1: 850°C (glow wire test)■ Knockout holes for cable glands and connection accessories to sockets■ Materials :❑ housing made of self-extinguishing engineering polymer❑ RAL colour 7035❑ screw head plugs

Junction boxes IP55

Dimensions Number and type CodeH L P *** **** *****

75 110 65 4 x PG 21 83963

110 110 65 6 x PG 21 83964

150 110 100 6 x PG 21 83962

110 150 100 4 x PG 21 + 1 x PG21/29 + 1 x PG 29 83965

150 150 100 4 x PG 21 + 2 x PG 21/29 83966

Connection accessories

PG thread cable glandsin accordance with DIN 46320made of insulating material, grey RAL 7035 – complete with lock-nut

thread cable diameter connector diamètre Code

PG 16 14 – 16mm 23mm 83994

PG 21 14 – 20mm 28.5mm 83995

PG 29 19 – 26mm 37.5mm 83996

PG thread nipplesmade of insulating material, grey RAL 7035 – complete with lock-nut, rubber packing ring forjoining boxes, enclosures and sockets

thread cable diameter connector diamètre Code

PG 16 23mm 83985

PG 21 28.5mm 83986

PG 29 37.5mm 83987

Brass terminal blocks for earth and neutral connections

description Code

with holes 1 x 16 + 4 x 10mm2 83970

1 x 16 + 6 x 10mm2 83971

1 x 16 + 10 x 10mm2 83972

2 x 16 + 10 x 10mm2 83973

2 x 16 + 16 x 10mm2 83974

Terminal block supportsmade of insulating material – suitable for brass terminal blocks

for enclosures for terminal blocks Code

83325 2 x 83970 83975

83326 2 x 83970 / 83971 / 1 x 83972 / 83970 83976

83327 All terminals 83977

Brass terminal blocks complete with supportfor PK Compact socket enclosures

description Code

with holes 1 x 16 + 4 x 10mm2 83980

Technical guide

IndexGeneral information 76Operating conditions 76Degree of protection 79Behaviour to abnormal heat and fire 81Behaviour to chemical agents 82


Technical guide Industrial type plugs and socketsGeneral information

The catalogue includes a vast range of plugs and socketsdesigned mainly for industrial use, both indoor and outdoor,where the ambient temperature does not normally exceed 40°C.Thanks to the manufacturing characteristics and to the use ofmaterials with superior performance and resistance to chemicaland environmental agents, these devices are widely used also inbuilding sites and in other sectors, like workshops, agricultureand offices.In the case of use in special environments, for example on ships,or in areas with explosion hazards, special characteristics can berequired.

Reference standardsThe standards, from a point of view of dimensions andperformance, for this family of products are defined at aninternational level and included in the European standards:

IEC60309-1EN 60309-1

Plugs and sockets for industrial use.Part 1: General provisions.

IEC 6060309-2EN 60309-2

Plugs and sockets for industrial use.Part 2: Provisions of dimensional interchangeability for plugs andsockets with cylindrical pins and sleeves

DefinitionsThe various applications of plugs and sockets include thefollowing devices:

Plug and socket outlet: Device which permits the connection ofa flexible cable to a power supply installation: it comprises asocket and a plug.

Socket: Part which is to be installed in the power supplyinstallation or incorporated in switchgear and controlgear.

Plug: Part which is securely connected, or designed to beconnected, to a flexible cable connected to an appliance or to aconnector.

Plug and socket outlet

Appliance

Power supply Applianceplug inlet

sockets plug inlet

wanderplug

flexible cable

wander socket

Wander plug and socket connection: Device which permitsthe connection of two flexible cables: it comprises a wandersocket and a plug.

Wander plug: Part which is securely connected, or designed tobe connected, to a power supply flexible cable.

Appliance plug inlet: Device which permits the connection of aflexible cable to an appliance: it comprises a wander socket anda plug inlet.

Plug inlet: Incorporated part fixed, or designed to be fixed, to anappliance.

Operating conditionsThe Standards IEC 60947-1, EN 60947-1, “Low voltageswitchgear and controlgear: General rules”, define the normaloperating conditions for electrical and electronic devices. Suchstandards are generally applicable to devices operating withinthe voltage limit of up to 1,000V for alternated current or 1,500Vfor direct current, unless otherwise required by the specificproduct standard.

Ambient temperatureMaximum temperature: +40°C with average temperature during24 hours not exceeding +35°C;lower temperature limit: -5°C.

AltitudeUp to 2,000 m a.s.l.

Atmospheric conditionsHumidityRelative humidity not exceeding 50% with temperature of +40°C.A higher relative humidity is allowed with a lower temperature;for example, 90% with +20°C (see drawing).

Level of environmental pollutionThe following levels of pollution are considered for electrical andelectronic devices:

level 1there is no pollution or there may be dry non-conductive pollution;

level 2normally the devices can be used in the presence of non-conductive polluting substances; occasionally there may betemporary conductivity caused by condensation;

level 3presence of conductive pollution or dry non-conductive pollution,which become conductive with condensation;

level 4the pollution causes persistent and high conductivity; suchpollution is caused for example by conductive dust, rain or snow.

The pollution level is a conventional number based on the amount of conductive or hygroscopicdust, ionised gas or salts, on the relative humidity and on the frequency which causes absorptionor condensation of humidity, a phenomenon which involves a reduction of dielectric strength and/orsurface resistivity. The pollution level referred to is the one occurring in the immediate vicinity tothe air and surface between elements with different potential.

The products included in this catalogue can be used also in environments with particularly severeconditions. Our Technical Department can be contacted for any further information.

The normal pollution level is:

for domestic or similar devices:

level 2 level 3

for industrial type applications:

wander plug

Wander plugand socketconnection

wandersocket

flexible cable



Principal provisionsThe standards cover the use of plugs and sockets with eitheralternate current, frequency of up to 500Hz, or direct current,divided into two main classes:

■ extra-low voltage plugs and sockets, with operating voltage ofup to 50V.

■ low voltage plugs and sockets, with operating voltage of 50Vto 690V.

The standards cover rated currents of 16 and 32A with 2P and3P configurations for extra-low voltage, and rated currents of 16,32, 63 and 125A with 2P+ , 3P+ and 3P+N+ for lowvoltage.

There is a specific model for each use, with different ratedcharacteristics of voltage, frequency, polarity and application,incorporating safety hindrances which make it impossible toinsert any plug in a socket which is not the exact correspondingtype.Non-interchangeability is ensured by compliance with thedifferent standardised dimension tables which indicate differentground contact positions in relation to a standard fixed referenceof the connection.

Low voltage versions > 50V

In the low voltage versions non-interchangeability is ensured bymeans of two elements:

■ a guide spline on the socket which matches with acorresponding nib on the plug.

■ a ground contact larger than the other contacts, in a differentclock position according to the rated operating characteristics.

The clock position (h) of the ground contact is checked byobserving, with the socket viewed from the front, the position ofthe ground contact in relation to the main keyway (guide spline),always positioned at 6 o’clock.

Extra low voltage versions <50V

Also for these versions, with no ground contact, non-interchangeability is ensured by means of two referenceelements:■ a guide spline on the socket which matches with a

corresponding nib on the plug, always at a fixed 6 o’clockposition.

■ a secondary keyway, also this a spline on the socket to whichcorresponds a nib on the plug, at different clock positionsaccording to the operating characteristics.

The clock position (h) of the secondary keyway is checked byobserving, with the socket viewed from the front, the position ofthe nib in relation to the main keyway, always positioned at 6o’clock.

Coded coloursFor easy identification of the operating voltage, the standardindicates conventional coded colours which may involve theentire device or only one part (e.g., lift cover, ring, etc.)

Rated operating Colour (1)voltage V

from 10 to 25 violet

from 40 to 50 white

from 100 to 130 yellow

from 200 to 250 blue

from 380 to 480 red

from 500 to 690 black

1) : For a frequency above 60Hz and up to and including 500Hz,the green colour can be used, if necessary, in conjunction withthe colour of the rated operating voltage.

Clock referenceThe range comprises all versions covered by the standards,including the more specific ones.Although the catalogue covers only some standard models, it ispossible to have all the different clock positions specified by thestandard; the following are some of the positions for this range:

Application Clock positionground contact

Common use h 6Refrigerated containers h 3marines, wharf and ship installations h 11power supply through isol. transformer (TST) h 12direct current 50 to 250V h 3

above 250V h 8High-frequency 100 to 300Hz h 10

above 300 to 500Hz h 2special voltage: 100 to 130V h 4

480 to 500V h 7600 to 690V h 5

Possible variations are indicated in the table at Page 78.

L/+

2P

Punto diriferimentoausiliario

Riferimentoprincipale

L3

L2

L1

3P

Punto diriferimentoausiliario

Riferimentoprincipale

Secondarykeyway

Main keyway

Secondarykeyway

Main keyway

Low voltage socket

Extra low voltage socket

2P

3P

L/+

2P + T

3P + N + T

L2 L3

NL1

2P +

3P + N +



2 P+ 3 P+ 3 P+N+

Summary table of identification and interchangeability for industrial-type plugs and sockets included in the different systems coveredby the IEC 309-2 standard

Low voltage - above 50V up to 690°V

FREQ.(Hz)

RATEDVOLTAGEUn (V)

PLUG AND SOCKETEARTH CONTACTPOSITION (1)

FREQ.(Hz)

RATEDVOLTAGEUn (V)


FREQ.(Hz)

RATEDVOLTAGEUn (V)


50 and 60

100-130 100-130 57/100-

75/130

4h 4h 4h 4h 4h 4h

200-250 200-250 120/208-

144/250

6h 6h 9h 9h 9h 9h

277 380-415 200/346-

240-415

5h 5h 6h 6h 6h 6h60

380-415 480-500 277/480-

288/500

9h 9h 7h 7h 7h 7h

Supply byisolatingtransformer

12h 12h 12h 12hSupply byisolatingtransformer

50 and 60 480-500 600-690 347/600-

400/690

7h 7h 5h 5h 5h 5h

100-300

included

more than 50 440-460 (2) 250/440-

265/460

– – 11h 11h 11h 11h

301-500

included

more than 50 380-440 (4) 220/380-

250/440 (4)

2h – 3h – 3h –

50-250

included

more than 50 more than 503h 3h 10h – – –

DC

more than 250 more than 50 more than 508h 8h 2h – 2h –

60 60

50

60

50

60

100-300

included

100-300

included

301-500

included

301-500

included

1h 1hFor all other rated voltage and/orfrequences that are not included in

the above configuration

50 and 6050 and 60

16 and32A

63 and125A

16 and32A

63 and125A

16 and32A

63 and125A

NOTES

(1) The ground contact position is in relation to the keyway. The table indicates only the values forseries I (16 - 32 - 63 - 125A); however the devices can also be used in accordance with the valuesof series II (20 - 30 - 60 - 100A).

(2) Mainly for installation on ships. The positions indicated by a dash (-) are not standardised.(3) Colour according to voltage.(4) For refrigerated containers only (standardised ISO).(5) The position of the secondary keyway is in relation to the main keyway.

(3)

(3)

(3)

(5)

Extra low voltage - up to 50V

50 and 60 without

keyway

50 and 60 12h

100to 200included

4h

300 2h

401to 500included

11h

3h

direct

current

10h

FREQ.(Hz)

RATEDOPERATINGVOLTAGE (V)

POSITION OF SECONDARYKEYWAY (5)16 and 32A 2P 3P

20-25

20-25 and

40-50

40-50

480-500400

20-25 and

40-50


Technical guide Technical dataDegree of protection

Degree of protectionThe standard classifies and codifies a great number of externalinfluences to which an electrical system may be subjected:presence of water, solid objects, risk of impacts, vibrations,presence of corrosive substances, etc.These situations can affect electrical components with a variableintensity depending on the characteristics of the system:presence of water, for example, can be either some drops ofwater falling or total immersion.

Degree of protection IPThe standard IEC 60529 (EN 60529) indicates, by means of theIP code, the degree of protection for electrical devices againstaccess to energised parts and against the entry of water and offoreign solid objects.This standard does not consider the protection against the risk ofexplosion or environmental situations like humidity, corrosivevapours, moulds or insects.The IP code is composed of 2 characteristic digits and can beexpanded by an additional letter if the protection of personsagainst access to energised parts is greater than the oneindicated by the first digit.Another supplementary letter indicates additional information onthe protection of material.The table on Page 80 indicates the classification criteria of the IPcode.

RemarksThe degree of protection IP must always be read digit by digitand not as a whole. For example, an enclosure with a degree ofprotection IP 31 is suitable for an environment that requires atleast a degree of protection IP 21. In this case a device withdegree of protection IP 30 cannot be used.Considering the fact that the presence of water on devices(panels) has in any event a negative effect (infiltration, corrosion,etc.), it will be advisable that all devices installed outdoor befitted with a protective roof, and possibly with side screens.The degree of protection indicated by the manufacturer is ingeneral applicable to the conditions indicated in the catalogue.However, only adequate assembly, installation and maintenancewill guarantee the original degree of protection.

Degree of protection againstmechanical impacts IKThe standard EN 50102 defines the degree of protection againstmechanical impacts indicated with the letters IK, followed by anumber. The following table indicates the impact values in joulescorresponding to each code.

IK impact IK Impactcode energy code energy

00 not protected 06 1 Joule

01 0,15 Joule 07 2 Joule




05 0,7 Joule

Degree of protection against mechanical impacts IK in accordance withstandard EN 50102


Technical guide Technical dataDegree of protection IP

Degree of protection IP for enclosures in accordance with IEC 529

PROTECTED AGAINST THE ENTRY

OF SOLID OBJECTS LARGER THAN 2.5 MM

EXAMPLE OF FULL APPLICATION OF THE IP CODE:

PROTECTED AGAINST

THE EFFECTS OF SPLASHING WATER

SUITABLE FOR USE

IN SPECIFIED ATMOSPHERIC CONDITIONS

PROTECTED AGAINST

ACCESS WITH A WIRE

IP 3 4 D W

ADDITIONAL LETTER* SUPPLEMENTARY LETTER

meaning A B C DSupplementary informations

for the protection of material

Protection of

person against Back of hand Finger Tool Wire

access with

Means of test

accessibility gauge articulated accessibility gauge accessibility gauge

Ø 50mm test finger Ø 2,5mm x100mm Ø 1mm x100mm

Used only if:

– the effective protection against access to dangerous parts is greater than the one indicated

by the first characteristic digit.

– only the protection against access to dangerous parts is indicated and the first characteristic digit

is then replaced by an X.

OPTIONAL LETTERS

H

M

S

W

Ø 50 mm

Ø 50 mm

Ø 12 mm

80 mm

Ø 2,5 mm

100 mm

Ø 35 mm

100 mm

Ø 1 mm

100 mm

Ø 35 mm

100 mm

High voltage devices

Tested against the harmful effects of water

infiltration when the mobile parts

of the device are moving.

Tested against the harmful effects of water

infiltration when the mobile parts

of the device are not moving.

Suitable for use in specified atmospheric

conditions and provided with additional

measures and procedures.

meaning 0 1 2 3 4 5 6 7 8

Protection of the Water drops Water dropsenclosure against falling vertically falling vertically

Splashes Strong jets Temporary Continuousthe harmful with an angle Rainof water

Jets of waterof water immersion immersioneffect of of 15°

from vertical

Agreed betweenthe manufacturer

Means of test and the user,but stricter

than 7

2nd CHARACTERISTIC DIGIT: Protection against the infiltration of water

15° 60°

1 m

15 cm

meaning 0 1 2 3 4 5 6

Protection of the Solid objects Solid objects Solid objects Solid objects Harmful amount of Dustenclosure against with dimensions with dimensions with dimensions with dimensions dust Talcum powder (totally protected)the entry of greater than 50 mm greater than12,5 mm greater than 2,5 mm greater than 1 mm Talcum powder

Means of testreference gauge reference gauge reference gauge reference gauge talcum powder talcum powder

Ø 50mm Ø 12,5mm Ø 2,5mm Ø 1mm

Protection ofperson against

back of handfinger tool wire

access withdella mano

Means of testaccessibility gauge articulated accessibility gauge accessibility gauge Ø 1 mm

Ø 50mm test finger Ø 2,5mm

1st CHARACTERISTIC DIGIT: Protection against the entry of foreign objects and against access to dangerous parts

Ø 50 mm Ø 12,5 mm

Ø2,5

mm

Ø 1 m

m

Ø 50 mm

Ø 50 mm

Ø 12 mm

80 mm

Ø 2,5 mm

100 mm

Ø 35 mm

100 mm

Ø 1 mm

100 mm

Ø 35 mm

100 mm


Technical guide Technical dataBehaviour to abnormal heat and to fire

Self-extinguishingcharacteristics and behaviourto abnormal heat and to fire

The assessment index for the behaviour to fire of components made of organic material is definedby the different product standards and generally refer to three different test methods.

Glow-wire testin accordance with IEC 60695-2-1

Any flame must stopwithin 30 sec afterremoving theincandescent wireTEST TEMPERATURES❏ 650°C❏ 750°C❏ 850°C❏ 960°CFalling burning drops donot set fire to the tissuepaper

Heat sources4 mm diameterincandescent wire

Duration of the testWire applied for 30 sec.

Characteristic elementsExtinguishing time of theflame

45°

12 mm

20 m

m

Simulate the thermalstress which may beproduced by heat orignition sources(incandescent elements oroverloaded resistors forshort periods) to be able toassess the danger ofstarting a fire.

UL method - UNDERWRITERS LABORATORIESin accordance with UL 94

❏ V0 if the specimenburns on average forless than 5 sec beforeself-extinguishing

❏ V1 if it burns onaverage for less than25 sec.

❏ V2 if it burns for less than25 sec with incandescentdrips

❏ HB if it burns for morethan 25 sec (specimenhorizontal and combustionvelocity less than 38mm/min)

Assimilated toASTM D-635

Heat sourcesFlame from a Bunsenburner

Duration of the testFlame applied for 10 sectwice in a row

Characteristic elementsDuration of combustion

Supply a classification ofthe various behaviourswhich the materials mayshow after contact with theflame from a Bunsenburner

Flame with needle testin accordance with IEC 60695-2-2

❏ the sample does notcatch fire

❏ the flame and theincandescent particlesdo not propagate fire

❏ the duration ofcombustion is less than30 sec after removingthe Bunsen burner

Heat sourcesFlame from a Bunsenburner

Duration of the testFlame applied for 5, 10, 20,30, 60, 120 sec according tothe specific standard

Characteristic elementsThe degree of severity:flame application time (AT)

Simulate the effect of smallflames which may occur ina malfunction conditionwithin the products withthe aim of judge the risk offire.

Test objective Test result Test conditions


PK low and extra low voltage

PK Unika

PK Isoblock

Kaedra system

H2Osalinesolution

conc. diluted dilutedconc. hexane benzene acetone absol.ethylalcohol

silicone mineral veget.oil

animalfat

syntheticgrease

animalorganicsolution

unleadedpremium

premium diesel ammoniaACIDS BASES SOLVENTS OIL FUELProduct series

Technical guide Technical dataBehaviour to chemical agents

LEGEND R resistant RL limited resistance NR not resistant

auxiliary sockets

plugs andsockets

schukosockets

sockets withinterlock switch

modular bases

junction boxes

enclosures

sockets withinterlock switch

modularpanels

The indications stated below are applicable to the conditionswhere the ambient temperature does not exceed 40°C and themechanical stress is not so concentrated as to cause permanentsurface deformations.The engineering polymers used for our products ensure optimumbehaviour of the finished products to chemical and atmosphericagents.

Should such products be used in environments with aparticularly high concentration of acids, bases, oils, it isadvisable to contact our Technical Department for a bettersolution to the problem.In any case, the series of products highlighted with blue aresuitable for use in particularly aggressive environments,characterised by strong concentration of oils, bases and acids.

Behaviour tochemicalagents

R R RL R RL R R RL RL RLRLR R R R R R R R R

R R RL R RL R R RL RL RLRLR R R R R R R R R

R RL R RL R R R RRL NR NR NR NR NR NR NR NR NR NR NR

R R RNR RL R NR NR NR NR R RL RL RLNR RLNR NR NR

R R RNR RL R NR NR NR NR R RL RL RLNR RLNR NR NR

R R R RL R R RLRL R RL RL RLR R R R R R R R

R R R RL R R RLRL R RL RL RLR R R R R R R R

R R R RL R RRL R RLRNR NR RL RL NR NR NR NR NR NR

R R R RL R R RLNR NR RL RL NR NR NR NRNR NR NR RL RL

RL

RL

Dimensions

IndexPK plugs and sockets low voltage 84PK plugs and sockets extra low voltage 90PK Unika 91PK Isoblock 92Enclosures for sockets Kaedra 93Enclosures for mod. devices Kaedra 94Universal enclosures Kaedra 95


Dimensions PK plugs and socketsLow voltageWander plugs and socketsPK PratiKa and PK

Plugs

IP 44

IP 67

Wander sockets

IP 44

IP 67

90° Wander plugs

IP 44

IP 67

A

BPg

Pg

A

B

A

B

Pg

A

B

Pg

Dim. 63A 125A

2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 265 265 265 325 325 325

B 110 110 110 131 131 131

Pg 36 36 36 48 48 48

Dim. 16A 32A

2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 110 115 119 141 141 141

B 91 98 105 113 113 116

Pg 16 16 16 21 21 21

Dim. 16A 32A

2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 110 115 119 141 141 141

B 91 98 105 113 113 116

Pg 16 16 16 21 21 21

Dim. 63A 125A

2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 265 265 265 325 325 325

B 110 110 110 131 131 131

Pg 36 36 36 48 48 48

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 129 139 142 152 152 160

B 59 65 74 76 76 86

C 48 48 58 58 58 58

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 129 139 142 152 152 160

B 73 81 89 95 95 102

C 48 48 58 58 58 58

C

B

A

C

A

B

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 140 150 153 165 165 172

B 78 88 97 98 98 106

C 48 48 58 58 58 58

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 142 152 155 164 164 173

B 84 87 96 99 99 104

C 48 48 58 58 58 58

B

AC

C

A

B


Dimensions PK plugs and socketsLow voltagePlugs with phase inversionSystems adapters

Plugs with phase inversionIP 44 IP 67

AB

Ø

B

Pg

A

90° Wander plugs with phase inversionIP 44 IP 67

Panel-mounted plugs with phase inversionIP 44 IP 67

Wall-mounted plugs with phase inversionIP 44 IP 67

G

G

Ø3

HBI

D

FA

G

G

Ø3

HBI

D

FA

M

L

M

L

A

GPg

L

I

M

FE

H

A

B

2 x P

A

GPg

LM F

I

E

H

C

B

2 x P

A

B

Pg

A

B

Pg

Dim. 16A3P+ 3P+N+

A 145 163

B 66,5 74,5

Ø 10 13

Dim. 16A3P+ 3P+N+

A 139 147,5

B 77 87

Pg Pg 16 Pg 21

Dim. 16A3P+ 3P+N+

A 115 119

B 91 98

Ø 16 16

Dim. 16A3P+ 3P+N+

A 115 119

B 98 105

Pg 16 16

Dim. 16A3P+ 3P+N+

A 100 130

B 109 125

C 140 134

E 41 7

F 18 116

G 67 92

H 21 25

I 80 106

L 50 65

M 23 28,5

Pg 21 21

P 2 x 16 2 x 21

Dim. 16A3P+ 3P+N+

A 100 130

B 116 169

C 140 134

E 41 7

F 18 116

G 67 92

H 21 25

I 80 106

L 50 65

M 23 28,5

Pg 21 21

P 2 x 16 2 x 21

Dim. 16A3P+ 3P+N+

A 65 90

B 85 100

C 52 77

D 60 85

E 5,2 5,5

F 53 76

G 20 20

H 41,5 59,5

I 23,5 20,5

L 85 96

M 124 148

Dim. 16A3P+ 3P+N+

A 65 90

B 85 100

C 52 77

D 60 85

E 5,2 5,5

F 53 76

G 20 20

H 41,5 59,5

I 23,5 20,5

L 92 107

M 124 148


Dimensions PK plugs and socketsLow voltageWall-mounted plugsPanel-mounted plugs

Wall-mounted plugs

IP 44

Panel-mounted plugs

IP 44

IP 67

IP 67

A

GPg

L

I

M

FE

H

A

B

2 x P

A

GPg

LM F

I

E

H

C

B

2 x P

F

I

5,8

L

G

M

E

A

H

B

C

Pg

G

G

Ø3

HBI

D

FA

M

L

G

G

Ø3

HBI

D

FA

M

L

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 100 100 130 130 130 130B 106 109 125 130 130 132C 139 140 134 136 136 140E 41 41 7 7 7 7F 18 18 116 116 116 116G 67 67 92 92 92 92H 21 21 25 25 25 25I 80 80 106 106 106 106L 50 50 65 65 65 65M 23 23 28,5 28,5 28,5 28,5Pg 21 21 21 21 21 21P 2 x 16 2 x 16 2 x 21 2 x 21 2 x 21 2 x 21

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 100 100 130 130 130 130B 111 116 169 178 178 179C 139 140 134 136 136 140E 41 41 7 7 7 7F 18 18 116 116 116 116G 67 67 92 92 92 92H 21 21 25 25 25 25I 80 80 106 106 106 106L 50 50 65 65 65 65M 23 23 28,5 28,5 28,5 28,5Pg 21 21 21 21 21 21P 2 x 16 2 x 16 2 x 16 2 x 16 2 x 16 2 x 16

Dim. 63A 125A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 162 162 162 224 224 224B 180 180 180 214 214 214C 281 281 281 354 354 354E 8 8 8 23 23 23F 127 127 127 147 147 147G 88 88 88 97 97 97H 31 31 31 44 44 44I 104 104 104 114 114 114L 40 40 40 50 50 50M 38 38 38 60 60 60Pg 29 29 29 48 48 48

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 65 65 90 90 90 90B 85 85 100 100 100 100C 52 52 77 77 77 77D 60 60 85 85 85 85E 5,2 5,2 5,5 5,5 5,5 5,5F 53 53 76 76 76 76G 20 20 20 20 20 20H 41,5 41,5 59,5 59,5 59,5 59,5I 23,5 23,5 20,5 20,5 20,5 20,5L 82 85 96 98 98 101M 123 124 148 159 159 159

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 65 65 90 90 90 90B 85 85 100 100 100 100C 52 52 77 77 77 77D 60 60 85 85 85 85E 5,2 5,2 5,5 5,5 5,5 5,5F 53 53 76 76 76 76G 20 20 20 20 20 20H 41,5 41,5 59,5 59,5 59,5 59,5I 23,5 23,5 20,5 20,5 20,5 20,5L 92 92 107 112 112 115M 123 124 148 159 159 159


Dimensions PK plugs and socketsLow voltageWall-mounted sockets

Small wall-mounted socketsIP 44

IP 67

Wall-mounted socketsIP 44

H

C

FPg 21

5,3

2332

I13

G

BA

A

GPg

L

I

M FE

H

A

B

2 x P

A

GPg

LM F

I

E

H

C

B

2 x P

F

I

5,8

L

G

M

E

A

H

B

C

Pg

IP 67

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 100 100 130 130 130 130

B 126 126 141 145 145 149

C 154 155 176 189 189 192

E 41 41 7 7 7 7

F 18 18 116 116 116 116

G 67 67 92 92 92 92

H 21 21 25 25 25 25

I 80 80 106 106 106 106

L 50 50 65 65 65 65

M 23 23 28,5 28,5 28,5 28,5

Pg 21 21 21 21 21 21

P 2 x 16 2 x 16 2 x 21 2 x 21 2 x 21 2 x 21

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 100 100 130 130 130 130

B 126 127 143 148 148 154

C 155 156 178 191 191 194

E 41 41 7 7 7 7

F 18 18 116 116 116 116

G 67 67 92 92 92 92

H 21 21 25 25 25 25

I 80 80 106 106 106 106

L 50 50 65 65 65 65

M 23 23 28,5 28,5 28,5 28,5

Pg 21 21 21 21 21 21

P 2 x 16 2 x 16 2 x 21 2 x 21 2 x 21 2 x 21

Dim. 63A 125A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 162 162 162 224 224 224

B 180 180 180 213 213 213

C 255 255 255 340 340 340

E 8 8 8 23 23 23

F 127 127 127 147 147 147

G 88 88 88 97 97 97

H 31 31 31 44 44 44

I 104 104 104 114 114 114

L 40 40 40 50 50 50

M 38 38 38 60 60 60

Pg 29 29 29 48 48 48

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 131 131 150 159 159 160

B 92 92 101 104 104 106

C 82 82 100 100 100 100

F 59 59 69 69 69 69

G 20 20 24 24 24 24

H 70 70 81 81 81 81

I 33 33 47 47 47 47

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 132 132 152 161 161 162

B 92 92 101 104 104 106

C 82 82 100 100 100 100

F 59 59 69 69 69 69

G 20 20 24 24 24 24

H 70 70 81 81 81 81

I 33 33 47 47 47 47H

C

FPg 21

5,3

2332

I13

G

B

A


Straight panel-mounted socketsIP 44

IP 67

G5H C

BAE

D

F

E

F

D

A B 5 G

H C

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 40 40 40 64 64 64

B 54 54 54 63 63 64

C 44 48 54 58 58 65

D 73 81 89 95 95 102

E 65 65 90 90 90 90

F 85 85 100 100 100 100

G 52 52 77 77 77 77

H 60 60 85 85 85 85

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 40 40 40 64 64 64

B 54 54 54 63 63 64

C 44 48 54 58 58 65

D 60 68 76 82 82 98

E 65 65 90 90 90 90

F 85 85 100 100 100 100

G 52 52 77 77 77 77

H 60 60 85 85 85 85

Dimensions PK plugs and socketsLow voltagePanel-mounted socketsPK PratiKa

Angled panel-mounted socketsIP 44

IP 67

5 G

C

7

I

18

BAE

F

D

LH

D

F

E BA

18

H

5 G

ILC

7

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 57 57 56 64 64 64

B 46 48 50 53 53 55

C 54 58 70 70 70 75

D 60 68 76 82 82 89

E 65 65 90 90 90 90

F 85 85 100 100 100 100

G 52 52 77 77 77 77

H 60 60 85 85 85 85

I 2 2 7 3 3 2,5

L 59 65,5 75 76 76 83

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 57 57 56 64 64 64

B 46 48 50 54 54 57

C 54 58 70 70 70 75

D 73 81 89 95 95 102

E 65 65 90 90 90 90

F 85 85 100 100 100 100

G 52 52 77 77 77 77

H 60 60 85 85 85 85

I 2 2 7 3 3 2,5

L 59 65,5 75 76 76 83


Dim. 63A 125A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 56 56 56 76 76 76

B 73 73 73 90 90 90

C 82 82 82 96 96 96

E 100 100 100 110 110 110

F 107 107 107 114 114 114

G 77 77 77 90 90 90

H 85 85 85 90 90 90

L 90 90 90 102 102 102

Straight panel-mounted socketsIP 44

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 22 22 22 28 28 28

B 54 54 54 63 63 64

C 44 48 54 58 58 65

D 60 68 76 82 82 98

E 65 65 90 90 90 90

F 85 85 100 100 100 100

G 52 52 77 77 77 77

H 60 60 85 85 85 85

F

D

EA

B 5 G

H C

Dimensions PK plugs and socketsLow voltagePanel-mounted socketsPK PratiKa and PK

L = 108 mm for 63 A and 129 mm for 125 A

Dim. 63A 125A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 52 52 52 76 76 76

B 61 61 61 85 85 85

C 78 78 78 90 90 90

E 100 100 100 110 110 110

F 107 107 107 114 114 114

G 77 77 77 90 90 90

H 85 85 85 90 90 90I 85 85 85 96 96 96

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 38 38 37 48 48 48

B 46 48 50 54 54 57

C 54 58 70 70 70 75

D 73 81 89 95 95 102

E 65 65 90 90 90 90

F 85 85 100 100 100 100

G 52 52 77 77 77 77

H 60 60 85 85 85 85

I 2 2 7 3 3 2,5L 59 65,5 75 76 76 83

IP 67

IL

5 G

18

H

C

7

BA

D

F

E

Angled panel-mounted socketsIP 44

F

E A B

18

5 G

ILH C

7

D

IP 67 Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 22 22 22 28 28 28

B 54 54 54 63 63 64

C 44 48 54 58 58 65

D 73 81 89 95 95 102

E 65 65 90 90 90 90

F 85 85 100 100 100 100

G 52 52 77 77 77 77

H 60 60 85 85 85 85

CH

G5BA

E

F

D

Dim. 16A 32A2P+ 3P+ 3P+N+ 2P+ 3P+ 3P+N+

A 38 38 37 48 48 48

B 46 48 50 53 53 55

C 54 58 70 70 70 75

D 60 68 76 82 82 89

E 65 65 90 90 90 90

F 85 85 100 100 100 100

G 52 52 77 77 77 77

H 60 60 85 85 85 85

I 2 2 7 3 3 2,5L 59 65,5 75 76 76 83

M = 108 mm for 63 A and 129 mm for 125 A


IP 67

Wander socketsIP 44 IP 67

Wall-mounted socketsIP 44 IP 67

Wander-plugsIP 44 IP 67

Wall-mounted plugsIP 44

158

57,5

145

71,5

Pg 21

82

59Pg 21

5,3

2332

70

3313 20

74

104

172

72

Pg 21

159

73

70

82

59Pg 21

5,3

2332

3313

20

81

118

3313

20

118

8282

82

59Pg 21

5,3

2332

Panel-mounted straight sockets with flange 65 x 65IP 44

4124

52 45 65

65

525,2

52 45

65

52 45 65

65

525,2

Dimensions PK plugs and socketsExtra low voltagePlugs and sockets


Dimensions PK sockets with interlocked switchPK Unika

PK Unika sockets with interlocked switchwall-mounted version panel-mounted version

PK Unika sockets with safety transformerwall-mounted version panel-mounted version

PK Unika mounting boxeswall-mounting flush mounting

PK Unika modular baseswall-mounting

IP44 IP65 IP44 IP65Dim. 16A 32A 16A 32A 16A 32A 16A 32A

3P 4P 5P 3P 4P 5P 3P 4P 5P 3P 4P 5P 3P 4P 5P 3P 4P 5P 3P 4P 5P 3P 4P 5P

A 150 150 151 151 151 152 149 150 151 151 151 153 69 69 70 70 70 71 68 69 70 70 70 72

B 235 239 257 271 271 274 237 240 244 260 260 261 154 158 176 190 190 193 156 159 163 179 179 180

A = 166 (IP44) 167 (IP65) A = 86 (IP44) 87 (IP65)


Dimensions PK sockets with interlocked switchPK Isoblock

B D

AC 17

Modular panels

Sockets with safety transformer

144

Pg 21 (32A)Pg 29 (63A)

Pg 21 (32A)Pg 29 (63A)

144

147

371

(x32

A)

- 38

9 (x

63A

)

120

6,2

11

30

260

41

1206,

211

30

260

4114737

1 (x

32A

) -

389

(x63

A)

IP 65 - 32A & 63A

IP 65 - 32A

Pg 21

144

345

105

382

465

126

105

11

260

6,2

41

30

Sockets with DIN railIP 65 - 16A et 32A

Dim. 63 A 125 AA 640 710B 185 205C 510 520

PK Isoblock - Sockets with safety switch and electrical interlockIP 65-63 & 125A

270

270

232/287

A

C

B

Ø7

246

246

Dim. 83925 - 83325 83926 - 83326 83927 - 83327A 111 222 151B 535 535 535C 81 192 121D 514 514 514


Dimensions Kaedra SystemEnclosures for sockets

Mini enclosures for PK sockets with 65 x 85 apertures

Enclosures for PK sockets with 90 x 100 apertures

Enclosures for PK Unika sockets with 103 x 225 apertures

Enclosures for socket combinations


Dimensions Kaedra SystemEnclosures for modular devices

Mini enclosures for modular devicesModules A L

4 – 123 6 – 159 8 88 19512 160 267

Enclosures with socket interface


Dimensions Kaedra SystemInterface enclosuresUniversal enclosures

Interface enclosures


PK industrialPlugs and socketsGeneral index

PKUPKJ16R413 74PKJ16R423 74PKJ16R434 74PKJ16R435 74PKJ16R713 74PKJ16R723 74PKJ16R734 74PKJ16R735 74PKJ16S413 74PKJ16S423 74PKJ16S434 74PKJ16S435 74PKJ16S713 74PKJ16S723 74PKJ16S734 74PKJ16S735 74PKJ32R413 74PKJ32R423 74PKJ32R434 74PKJ32R435 74PKJ32R713 74PKJ32R723 74PKJ32R734 74PKJ32R735 74PKJ32S413 74PKJ32S423 74PKJ32S434 74PKJ32S435 74PKJ32S713 74PKJ32S723 74PKJ32S734 74PKJ32S735 74PKJ63S723 74PKJ63S734 74PKJ63S735 74

PKXPKX16M413 14PKX16M414 14PKX16M415 14PKX16M423 14PKX16M424 14PKX16M425 14PKX16M433 14PKX16M434 14PKX16M435 14PKX16M444 14PKX16M445 14PKX16M713 14PKX16M714 14PKX16M715 14PKX16M723 14PKX16M724 14PKX16M725 14PKX16M733 14PKX16M734 14PKX16M735 14PKX16M744 14PKX16M745 14PKX32M413 14PKX32M414 14PKX32M415 14PKX32M423 14PKX32M424 14PKX32M425 14PKX32M433 14PKX32M434 14PKX32M435 14PKX32M444 14PKX32M445 14PKX32M7C4 31PKX32M713 14PKX32M714 14

PKX32M715 14PKX32M723 14PKX32M724 14PKX32M725 14PKX32M733 14PKX32M734 14PKX32M735 14PKX32M744 14PKX32M745 14

PKYPKY16F413 26PKY16F414 26PKY16F415 26PKY16F423 26PKY16F424 26PKY16F425 26PKY16F433 26PKY16F434 26PKY16F435 26PKY16F444 26PKY16F445 26PKY16F713 26PKY16F714 26PKY16F715 26PKY16F723 26PKY16F724 26PKY16F725 26PKY16F733 26PKY16F734 26PKY16F735 26PKY16F744 26PKY16F745 26PKY16G413 27PKY16G414 27PKY16G415 27PKY16G423 27PKY16G424 27PKY16G425 27PKY16G433 27PKY16G434 27PKY16G435 27PKY16G444 27PKY16G445 27PKY16G713 27PKY16G714 27PKY16G715 27PKY16G723 27PKY16G724 27PKY16G725 27PKY16G733 27PKY16G734 27PKY16G735 27PKY16G744 27PKY16G745 27PKY16M413 22PKY16M414 22PKY16M415 22PKY16M423 22PKY16M424 22PKY16M425 22PKY16M433 22PKY16M434 22PKY16M435 22PKY16M444 22PKY16M445 22PKY16M713 22PKY16M714 22PKY16M715 22PKY16M723 22PKY16M724 22PKY16M725 22PKY16M733 22PKY16M734 22PKY16M735 22

PKY16M744 22PKY16M745 22PKY32F413 27PKY32F414 27PKY32F415 27PKY32F423 27PKY32F424 27PKY32F425 27PKY32F433 27PKY32F434 27PKY32F435 27PKY32F444 27PKY32F445 27PKY32F7C4 31PKY32F713 27PKY32F714 27PKY32F715 27PKY32F723 27PKY32F724 27PKY32F725 27PKY32F733 27PKY32F734 27PKY32F735 27PKY32F744 27PKY32F745 27PKY32G413 27PKY32G414 27PKY32G415 27PKY32G423 27PKY32G424 27PKY32G425 27PKY32G433 27PKY32G434 27PKY32G435 27PKY32G444 27PKY32G445 27PKY32G7C4 31PKY32G713 27PKY32G714 27PKY32G715 27PKY32G723 27PKY32G724 27PKY32G725 27PKY32G733 27PKY32G734 27PKY32G735 27PKY32G744 27PKY32G745 27PKY32M413 22PKY32M414 22PKY32M415 22PKY32M423 22PKY32M424 22PKY32M425 22PKY32M433 22PKY32M434 22PKY32M435 22PKY32M444 22PKY32M445 22PKY32M7C4 31PKY32M713 22PKY32M714 22PKY32M715 22PKY32M723 22PKY32M724 22PKY32M725 22PKY32M733 22PKY32M734 22PKY32M735 22PKY32M744 22PKY32M745 22

1000010200 7210209 72

10210 7210220 72

1300013135 7113136 7113137 7113138 7113139 7113140 7113141 7113142 7113143 7113144 7113175 6813176 6813177 6813178 6813179 6813180 6813181 6813182 6813185 6813186 6813187 6813188 6813189 6813190 6813191 6813192 6813193 6813361 7213362 7213363 7213575 7213576 7213577 7213578 7213579 7213581 7213582 7213583 7213584 7213585 7213586 7213587 7213588 7213589 7213595 7213597 7213598 7213599 7213735 7313736 7313925 7213934 7313935 7313936 7313937 7313938 7313940 7313941 7213944 7213945 7213946 7213947 7313948 7313949 7313950 7313990 6913991 6913992 6913993 6913994 6914190 73

8100081176 2581177 2581178 2581179 2581180 2581182 2581183 2581185 2581186 2581188 2581189 2581190 2581191 2581192 2581194 2581195 2581197 2581198 2581199 3181276 2881277 2881278 2881279 2881280 2881282 2881283 2881285 2881286 2881288 2881289 2881290 2881291 2881292 2881294 2881295 2881297 2881298 2881376 1581377 1581378 1581379 1581380 1581382 1581383 1581385 1581386 1581388 1581389 1581390 1581391 1581392 1581394 1581395 1581397 1581398 1581476 2381477 2381478 2381479 2381480 2381482 2381483 2381485 2381486 2381488 2381489 2381490 2381491 2381492 2381494 2381495 2381497 2381498 2381576 17

81577 1781578 1781579 1781580 1781582 1781583 1781585 1781586 1781588 1781589 1781590 1781591 1781592 1781594 1781595 1781597 1781598 1781599 3181676 2981677 2981678 2981679 2981680 2981682 2981683 2981685 2981686 2981688 2981689 2981690 2981691 2981692 2981694 2981695 2981697 2981698 2981701 1681702 1681703 1681704 1681705 1681706 1681707 1681708 1681709 1681711 1681712 1681713 1681714 1681715 1681716 1681717 1681718 1681719 1681720 1681721 1681723 1681724 1681726 2181727 2181728 2181729 2181730 2181731 2181732 2181733 2181751 1681752 1681753 1681754 1681755 1681756 1681757 1681758 1681759 16

To find

Code Page Code Page Code Page Code Page Code Page Code Page


81761 1681762 1681763 1681764 1681765 1681766 1681767 1681768 1681769 1681770 1681771 1681773 1681774 1681776 2181777 2181778 2181779 2181780 2181781 2181782 2181783 2181799 3181801 1881802 1881803 1881804 1881805 1881806 1881807 1881808 1881809 1881811 1881812 1881813 1881814 1881815 1881816 1881817 1881818 1881819 1881820 1881821 1881823 1881824 18

8200082026 5182027 5182028 5082029 5082030 5082031 5082032 5082033 5082034 5082035 5082036 5082037 5082038 5082039 5082040 5082041 5082042 5082043 5082044 5082045 5082046 5082047 5082048 5082049 5082061 5982062 5982063 5982064 5982076 51

82077 5182078 5082079 5082080 5082081 5082082 5082083 5082084 5082085 5082086 5082087 5082088 5082089 5082090 5082091 5082092 5082093 5082094 5082095 5082096 5082097 5082098 5082099 5082101 4182102 4182103 4182104 4182105 4182106 4182111 4182112 4182113 4182115 4182116 4182117 4182118 4182119 4182120 4182125 4182126 4182127 4182151 4182152 4182153 4182154 4182155 4182156 4182161 4182162 4182163 4182165 4182166 4182167 4182168 4182169 4182170 4182175 4182176 4182177 4182201 2482202 2482203 2482204 2482205 2482206 2482207 2482208 2482209 2482211 2482212 2482213 2482214 2482215 2482216 2482217 24

82218 2482219 2482220 2482221 2482223 2482224 2482251 2482252 2482253 2482254 2482255 2482256 2482257 2482258 2482259 2482261 2482262 2482263 2482264 2482265 2482266 2482267 2482268 2482269 2482270 2482271 2482273 2482274 2482299 3182301 3882302 3882303 3882304 3882305 3882306 3882311 3882312 3882313 3882315 3882316 3882317 3882318 3882319 3882320 3882325 3882326 3882327 3882351 3882352 3882353 3882354 3882355 3882356 3882361 3882362 3882363 3882365 3882366 3882367 3882368 3882369 3882370 3882375 3882376 3882377 3882401 4082402 4082403 4082404 4082405 4082406 4082411 4082412 4082413 4082415 40

82416 4082417 4082418 4082419 4082420 4082425 4082426 4082427 4082451 4082452 4082453 4082454 4082455 4082456 4082461 4082462 4082463 4082465 4082466 4082467 4082468 4082469 4082470 4082475 4082476 4082477 4082501 3982502 3982503 3982504 3982505 3982506 3982511 3982512 3982513 3982515 3982516 3982517 3982518 3982519 3982520 3982525 3982526 3982527 3982751 5882752 5882753 5882754 5882755 5882756 5882757 5882758 5882759 5882761 5882762 5882763 5882764 5882765 5882766 5882767 5882768 5882769 5882770 5882771 5882773 5882774 5882776 5882777 5882778 5882779 5882780 5882782 5882783 5882785 5882786 58

82901 4282902 4282903 4282904 4282905 4282906 4282911 4282912 4282913 4282915 4282916 4282917 4282918 4282919 4282920 4282925 4282926 4282927 4282932 6182933 6182944 6182945 6182951 4282952 4282953 4282954 4282955 4282956 4282961 4282962 4282963 4282965 4282966 4282967 4282968 4282969 4282970 4282975 4282976 4282977 4282979 6182982 6182983 6182985 6182991 6182994 6182995 6182997 61

8300083026 5183027 5183028 5083029 5083030 5083031 5083032 5083033 5083034 5083035 5083036 5083037 5083038 5083039 5083040 5083041 5083042 5083043 5083044 5083045 5083046 5083047 5083048 5083049 5083076 51

83077 5183078 5083079 5083080 5083081 5083082 5083083 5083084 5083085 5083086 5083087 5083088 5083089 5083090 5083091 5083092 5083093 5083094 5083095 5083096 5083097 5083098 5083099 5083101 2583102 2583103 2583104 2583105 2583106 2583107 2583108 2583109 2583111 2583112 2583113 2583114 2583115 2583116 2583117 2583118 2583119 2583120 2583121 2583123 2583124 2583151 2583152 2583153 2583154 2583155 2583156 2583157 2583158 2583159 2583161 2583162 2583163 2583164 2583165 2583166 2583167 2583168 2583169 2583170 2583171 2583173 2583174 2583299 3183325 6083326 6083327 6083399 3183501 1783502 1783503 17

To find PK industrialPlugs and socketsGeneral index



83504 1783505 1783506 1783507 1783508 1783509 1783511 1783512 1783513 1783514 1783515 1783516 1783517 1783518 1783519 1783520 1783521 1783523 1783524 1783526 2183527 2183528 2183529 2183530 2183531 2183532 2183533 2183551 1783552 1783553 1783554 1783555 1783556 1783557 1783558 1783559 1783561 1783562 1783563 1783564 1783565 1783566 1783567 1783568 1783569 1783570 1783571 1783573 1783574 1783576 2183577 2183578 2183579 2183580 2183581 2183582 2183583 2183788 5883789 5883790 5883791 5883792 5883793 5883794 5883795 5883796 5883797 5883798 5883799 3183826 2183827 2183828 2183829 2183830 2183831 2183832 21

83833 2183851 1983852 1983853 1983854 1983855 1983856 1983857 1983858 1983859 1983861 1983862 1983863 1983864 1983865 1983866 1983867 1983868 1983869 1983870 1983871 1983873 1983874 1983876 2183877 2183878 2183879 2183880 2183881 2183882 2183883 2183899 3183901 2183902 2183903 2183904 2183905 2183906 2183907 2183908 2183911 2183912 2183913 2183914 2183915 2183916 2183917 2183918 2183919 5483920 5483921 5583922 5583923 5583924 5483925 6083926 6083927 6083929 7383933 1983934 1983935 1983936 1983937 1983962 6283963 6283964 6283965 6283966 6283970 6283971 6283972 6283973 6283974 6283975 6283976 6283977 62

To find PK industrialPlugs and socketsGeneral index


83980 6283985 6283986 6283987 6283991 7383992 7383993 7383994 6283995 6283996 6283997 7383998 7383999 73


Notes

Merlin Gerin is a world leader in the manufacture and supply of high, medium and low voltage products for the distribution, protection, control and management of electrical systems and is focused on the needs of both thecommercial and industrial sectors. The newly launched VDINetwork Solutions offer provides flexible, configurableethernet systems for all communication needs.

Square D is a total quality organisation and its business is to put electricity to work productively and effectively, protecting people, buildings and equipment. Its low voltageelectrical distribution equipment, systems and services areused extensively in residential and commercial applications.

Telemecanique is a UK market leader and world expert inautomation and control. It provides complete solutions, withit's range of components, Modicon range of high technologyprogrammable controllers (PLCs), multiple fieldbus andethernet communication networks, HMI, motion controlsystems, variable speed drives and communicationssoftware. In addition, it offers power distribution throughprefabricated busbar trunking.

Schneider Electric’s local supportSchneider Electric is committed to supporting its customers at every stage of a project. Our 180 sales engineers, the largestdedicated sales force in the UK electrical industry, operate from 4 customer support centres.

Our sales engineers are skilled at assessing individual requirements and combined with the expert support of our product specialists, will develop the most effective and economical answer taking relevant regulations and standards fully into account.

To access the expertise of the Schneider Electric group, please call 0870 608 8 608. Each customer support centre includesfacilities for demonstrations and training, and presentation rooms fully equipped with audio visual and video, providing excellent meeting facilities.

www.schneider.co.uk

SEP 2004MGLV 5548

ScotlandSchneider Electric LtdUnit 11000Academy Business ParkGower StreetGlasgow G51 [email protected]

South WestSchneider Electric LtdPO Box 41Langley RoadChippenhamWiltshire SN51 [email protected]

North WestSchneider Electric Ltd8 Brindley RoadCity Park Business VillageCornbrook Manchester M16 [email protected]

London and South EastSchneider Electric Ltd2nd Floor408 StrandLondon WC2R [email protected]

Industrial systems and solutions showroomSchneider Electric Ltd, University of Warwick Science Park, Sir William Lyons Road, Coventry CV4 7EZ

Building systems and solutions showroomSchneider Electric Ltd, Stafford Park 5, Telford, Shropshire TF3 3BL

Energy and Infrastructure systems and solutions showroomSchneider Electric Ltd, 123 Jack Lane, Hunslet, Leeds LS10 1BS

Product showrooms

Local customer support centres

Fax 0870 608 8 6060870 608 8 608Nationwide support on one number - call the Customer Information Centre on

member of

.co.uk

pk industrial plugs and sockets - filkab.comfilkab.com › files › category_files ›...

Documents