pkcs #11 cryptographic token interface base specification ... · pkcs11-base-v3.0-cs01 19 december...
TRANSCRIPT
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 1 of 168
PKCS #11 Cryptographic Token Interface Base Specification Version 3.0
Committee Specification 01
19 December 2019
This stage: https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/cs01/pkcs11-base-v3.0-cs01.docx (Authoritative) https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/cs01/pkcs11-base-v3.0-cs01.html https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/cs01/pkcs11-base-v3.0-cs01.pdf
Previous stage: https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/csprd01/pkcs11-base-v3.0-csprd01.docx (Authoritative) https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/csprd01/pkcs11-base-v3.0-csprd01.html https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/csprd01/pkcs11-base-v3.0-csprd01.pdf
Latest stage: https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/pkcs11-base-v3.0.docx (Authoritative) https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/pkcs11-base-v3.0.html https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/pkcs11-base-v3.0.pdf
Technical Committee: OASIS PKCS 11 TC
Chairs: Tony Cox ([email protected]), Cryptsoft Pty Ltd Robert Relyea ([email protected]), Red Hat
Editors: Chris Zimman ([email protected]), Individual
Dieter Bong ([email protected]), Utimaco IS GmbH
Additional artifacts: This prose specification is one component of a Work Product that also includes:
• PKCS #11 header files: https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/cs01/include/pkcs11-v3.0/
Related work: This specification replaces or supersedes:
• PKCS #11 Cryptographic Token Interface Base Specification Version 2.40. Edited by Robert Griffin and Tim Hudson. Latest stage. http://docs.oasis-open.org/pkcs11/pkcs11-base/v2.40/pkcs11-base-v2.40.html.
This specification is related to:
• PKCS #11 Cryptographic Token Interface Profiles Version 3.0. Edited by Tim Hudson. Latest stage. https://docs.oasis-open.org/pkcs11/pkcs11-profiles/v3.0/pkcs11-profiles-v3.0.html.
• PKCS #11 Cryptographic Token Interface Current Mechanisms Specification Version 3.0. Edited by Chris Zimman and Dieter Bong. Latest stage. https://docs.oasis-open.org/pkcs11/pkcs11-curr/v3.0/pkcs11-curr-v3.0.html.
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 2 of 168
• PKCS #11 Cryptographic Token Interface Historical Mechanisms Specification Version 3.0. Edited by Chris Zimman and Dieter Bong. Latest stage. https://docs.oasis-open.org/pkcs11/pkcs11-hist/v3.0/pkcs11-hist-v3.0.html.
Abstract: This document defines data types, functions and other basic components of the PKCS #11 Cryptoki interface.
Status: This document was last revised or approved by the OASIS PKCS 11 TC on the above date. The level of approval is also listed above. Check the "Latest stage" location noted above for possible later revisions of this document. Any other numbered Versions and other technical work produced by the Technical Committee (TC) are listed at https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=pkcs11#technical.
TC members should send comments on this document to the TC's email list. Others should send comments to the TC's public comment list, after subscribing to it by following the instructions at the "Send A Comment" button on the TC's web page at https://www.oasis-open.org/committees/pkcs11/.
This specification is provided under the RF on RAND Terms Mode of the OASIS IPR Policy, the mode chosen when the Technical Committee was established. For information on whether any patents have been disclosed that may be essential to implementing this specification, and any offers of patent licensing terms, please refer to the Intellectual Property Rights section of the TC's web page (https://www.oasis-open.org/committees/pkcs11/ipr.php).
Note that any machine-readable content (Computer Language Definitions) declared Normative for this Work Product is provided in separate plain text files. In the event of a discrepancy between any such plain text file and display content in the Work Product's prose narrative document(s), the content in the separate plain text file prevails.
Citation format: When referencing this specification the following citation format should be used:
[PKCS11-Base-v3.0]
PKCS #11 Cryptographic Token Interface Base Specification Version 3.0. Edited by Chris Zimman and Dieter Bong. 19 December 2019. OASIS Committee Specification 01. https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/cs01/pkcs11-base-v3.0-cs01.html. Latest stage: https://docs.oasis-open.org/pkcs11/pkcs11-base/v3.0/pkcs11-base-v3.0.html.
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 3 of 168
Notices
Copyright © OASIS Open 2019. All Rights Reserved.
All capitalized terms in the following text have the meanings assigned to them in the OASIS Intellectual Property Rights Policy (the "OASIS IPR Policy"). The full Policy may be found at the OASIS website.
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published, and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this section are included on all such copies and derivative works. However, this document itself may not be modified in any way, including by removing the copyright notice or references to OASIS, except as needed for the purpose of developing any document or deliverable produced by an OASIS Technical Committee (in which case the rules applicable to copyrights, as set forth in the OASIS IPR Policy, must be followed) or as required to translate it into languages other than English.
The limited permissions granted above are perpetual and will not be revoked by OASIS or its successors or assigns.
This document and the information contained herein is provided on an "AS IS" basis and OASIS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY OWNERSHIP RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OASIS requests that any OASIS Party or any other party that believes it has patent claims that would necessarily be infringed by implementations of this OASIS Committee Specification or OASIS Standard, to notify OASIS TC Administrator and provide an indication of its willingness to grant patent licenses to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification.
OASIS invites any party to contact the OASIS TC Administrator if it is aware of a claim of ownership of any patent claims that would necessarily be infringed by implementations of this specification by a patent holder that is not willing to provide a license to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification. OASIS may include such claims on its website, but disclaims any obligation to do so.
OASIS takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on OASIS' procedures with respect to rights in any document or deliverable produced by an OASIS Technical Committee can be found on the OASIS website. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this OASIS Committee Specification or OASIS Standard, can be obtained from the OASIS TC Administrator. OASIS makes no representation that any information or list of intellectual property rights will at any time be complete, or that any claims in such list are, in fact, Essential Claims.
The name "OASIS" is a trademark of OASIS, the owner and developer of this specification, and should be used only to refer to the organization and its official outputs. OASIS welcomes reference to, and implementation and use of, specifications, while reserving the right to enforce its marks against misleading uses. Please see https://www.oasis-open.org/policies-guidelines/trademark for above guidance.
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 4 of 168
Table of Contents
1 Introduction ........................................................................................................................................... 9
1.1 IPR Policy ........................................................................................................................................... 9
1.2 Terminology ........................................................................................................................................ 9
1.3 Definitions ........................................................................................................................................... 9
1.4 Symbols and abbreviations ............................................................................................................... 10
1.5 Normative References ...................................................................................................................... 13
1.6 Non-Normative References .............................................................................................................. 14
2 Platform- and compiler-dependent directives for C or C++ ................................................................ 16
2.1 Structure packing .............................................................................................................................. 16
2.2 Pointer-related macros ..................................................................................................................... 16
3 General data types ............................................................................................................................. 18
3.1 General information .......................................................................................................................... 18
3.2 Slot and token types ......................................................................................................................... 19
3.3 Session types ................................................................................................................................... 24
3.4 Object types ...................................................................................................................................... 26
3.5 Data types for mechanisms .............................................................................................................. 30
3.6 Function types .................................................................................................................................. 32
3.7 Locking-related types ........................................................................................................................ 37
4 Objects ............................................................................................................................................... 41
4.1 Creating, modifying, and copying objects ......................................................................................... 42
4.1.1 Creating objects ........................................................................................................................ 42
4.1.2 Modifying objects ....................................................................................................................... 43
4.1.3 Copying objects ......................................................................................................................... 43
4.2 Common attributes ........................................................................................................................... 44
4.3 Hardware Feature Objects ................................................................................................................ 44
4.3.1 Definitions .................................................................................................................................. 44
4.3.2 Overview .................................................................................................................................... 44
4.3.3 Clock .......................................................................................................................................... 45 4.3.3.1 Definition ............................................................................................................................................ 45 4.3.3.2 Description ......................................................................................................................................... 45
4.3.4 Monotonic Counter Objects ....................................................................................................... 45 4.3.4.1 Definition ............................................................................................................................................ 45 4.3.4.2 Description ......................................................................................................................................... 45
4.3.5 User Interface Objects ............................................................................................................... 45 4.3.5.1 Definition ............................................................................................................................................ 45 4.3.5.2 Description ......................................................................................................................................... 46
4.4 Storage Objects ................................................................................................................................ 46
4.4.1 The CKA_UNIQUE_ID attribute ................................................................................................ 47
4.5 Data objects ...................................................................................................................................... 48
4.5.1 Definitions .................................................................................................................................. 48
4.5.2 Overview .................................................................................................................................... 48
4.6 Certificate objects ............................................................................................................................. 48
4.6.1 Definitions .................................................................................................................................. 48
4.6.2 Overview .................................................................................................................................... 48
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 5 of 168
4.6.3 X.509 public key certificate objects ........................................................................................... 50
4.6.4 WTLS public key certificate objects........................................................................................... 51
4.6.5 X.509 attribute certificate objects .............................................................................................. 52
4.7 Key objects ....................................................................................................................................... 53
4.7.1 Definitions .................................................................................................................................. 53
4.7.2 Overview .................................................................................................................................... 53
4.8 Public key objects ............................................................................................................................. 54
4.9 Private key objects ............................................................................................................................ 56
4.9.1 RSA private key objects ............................................................................................................ 58
4.10 Secret key objects .......................................................................................................................... 59
4.11 Domain parameter objects.............................................................................................................. 61
4.11.1 Definitions ................................................................................................................................ 61
4.11.2 Overview .................................................................................................................................. 61
4.12 Mechanism objects ......................................................................................................................... 61
4.12.1 Definitions ................................................................................................................................ 61
4.12.2 Overview .................................................................................................................................. 61
4.13 Profile objects ................................................................................................................................. 62
4.13.1 Definitions ................................................................................................................................ 62
4.13.2 Overview .................................................................................................................................. 62
5 Functions ............................................................................................................................................ 63
5.1 Function return values ...................................................................................................................... 66
5.1.1 Universal Cryptoki function return values .................................................................................. 67
5.1.2 Cryptoki function return values for functions that use a session handle ................................... 67
5.1.3 Cryptoki function return values for functions that use a token .................................................. 67
5.1.4 Special return value for application-supplied callbacks ............................................................ 68
5.1.5 Special return values for mutex-handling functions .................................................................. 68
5.1.6 All other Cryptoki function return values ................................................................................... 68
5.1.7 More on relative priorities of Cryptoki errors ............................................................................. 73
5.1.8 Error code “gotchas” .................................................................................................................. 74
5.2 Conventions for functions returning output in a variable-length buffer ............................................. 74
5.3 Disclaimer concerning sample code ................................................................................................. 75
5.4 General-purpose functions ............................................................................................................... 75
5.4.1 C_Initialize ................................................................................................................................. 75
5.4.2 C_Finalize .................................................................................................................................. 76
5.4.3 C_GetInfo .................................................................................................................................. 76
5.4.4 C_GetFunctionList ..................................................................................................................... 77
5.4.5 C_GetInterfaceList .................................................................................................................... 78
5.4.6 C_GetInterface .......................................................................................................................... 79
5.5 Slot and token management functions ............................................................................................. 81
5.5.1 C_GetSlotList ............................................................................................................................ 81
5.5.2 C_GetSlotInfo ............................................................................................................................ 82
5.5.3 C_GetTokenInfo ........................................................................................................................ 83
5.5.4 C_WaitForSlotEvent .................................................................................................................. 83
5.5.5 C_GetMechanismList ................................................................................................................ 84
5.5.6 C_GetMechanismInfo ................................................................................................................ 85
5.5.7 C_InitToken ............................................................................................................................... 86
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 6 of 168
5.5.8 C_InitPIN ................................................................................................................................... 87
5.5.9 C_SetPIN ................................................................................................................................... 88
5.6 Session management functions........................................................................................................ 89
5.6.1 C_OpenSession ........................................................................................................................ 89
5.6.2 C_CloseSession ........................................................................................................................ 90
5.6.3 C_CloseAllSessions .................................................................................................................. 91
5.6.4 C_GetSessionInfo ..................................................................................................................... 92
5.6.5 C_SessionCancel ...................................................................................................................... 92
5.6.6 C_GetOperationState ................................................................................................................ 93
5.6.7 C_SetOperationState ................................................................................................................ 94
5.6.8 C_Login ..................................................................................................................................... 97
5.6.9 C_LoginUser.............................................................................................................................. 98
5.6.10 C_Logout ................................................................................................................................. 99
5.7 Object management functions ........................................................................................................ 100
5.7.1 C_CreateObject ....................................................................................................................... 100
5.7.2 C_CopyObject ......................................................................................................................... 102
5.7.3 C_DestroyObject ..................................................................................................................... 103
5.7.4 C_GetObjectSize ..................................................................................................................... 104
5.7.5 C_GetAttributeValue ............................................................................................................... 105
5.7.6 C_SetAttributeValue ................................................................................................................ 107
5.7.7 C_FindObjectsInit .................................................................................................................... 107
5.7.8 C_FindObjects ......................................................................................................................... 108
5.7.9 C_FindObjectsFinal ................................................................................................................. 109
5.8 Encryption functions ....................................................................................................................... 109
5.8.1 C_EncryptInit ........................................................................................................................... 109
5.8.2 C_Encrypt ................................................................................................................................ 110
5.8.3 C_EncryptUpdate .................................................................................................................... 111
5.8.4 C_EncryptFinal ........................................................................................................................ 111
5.9 Message-based encryption functions ............................................................................................. 113
5.9.1 C_MessageEncryptInit ............................................................................................................ 113
5.9.2 C_EncryptMessage ................................................................................................................. 114
5.9.3 C_EncryptMessageBegin ........................................................................................................ 114
5.9.4 C_EncryptMessageNext .......................................................................................................... 115
5.9.5 C_ MessageEncryptFinal ........................................................................................................ 116
5.10 Decryption functions ..................................................................................................................... 118
5.10.1 C_DecryptInit ......................................................................................................................... 118
5.10.2 C_Decrypt.............................................................................................................................. 118
5.10.3 C_DecryptUpdate .................................................................................................................. 119
5.10.4 C_DecryptFinal ...................................................................................................................... 119
5.11 Message-based decryption functions ........................................................................................... 121
5.11.1 C_MessageDecryptInit .......................................................................................................... 121
5.11.2 C_DecryptMessage ............................................................................................................... 122
5.11.3 C_DecryptMessageBegin ...................................................................................................... 123
5.11.4 C_DecryptMessageNext ....................................................................................................... 123
5.11.5 C_MessageDecryptFinal ....................................................................................................... 124
5.12 Message digesting functions ........................................................................................................ 124
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 7 of 168
5.12.1 C_DigestInit ........................................................................................................................... 124
5.12.2 C_Digest ................................................................................................................................ 125
5.12.3 C_DigestUpdate .................................................................................................................... 125
5.12.4 C_DigestKey.......................................................................................................................... 126
5.12.5 C_DigestFinal ........................................................................................................................ 126
5.13 Signing and MACing functions...................................................................................................... 127
5.13.1 C_SignInit .............................................................................................................................. 127
5.13.2 C_Sign ................................................................................................................................... 128
5.13.3 C_SignUpdate ....................................................................................................................... 129
5.13.4 C_SignFinal ........................................................................................................................... 129
5.13.5 C_SignRecoverInit ................................................................................................................ 130
5.13.6 C_SignRecover ..................................................................................................................... 130
5.14 Message-based signing and MACing functions ........................................................................... 131
5.14.1 C_MessageSignInit ............................................................................................................... 132
5.14.2 C_SignMessage .................................................................................................................... 132
5.14.3 C_SignMessageBegin ........................................................................................................... 133
5.14.4 C_SignMessageNext ............................................................................................................. 133
5.14.5 C_MessageSignFinal ............................................................................................................ 134
5.15 Functions for verifying signatures and MACs ............................................................................... 134
5.15.1 C_VerifyInit ............................................................................................................................ 134
5.15.2 C_Verify ................................................................................................................................. 135
5.15.3 C_VerifyUpdate ..................................................................................................................... 136
5.15.4 C_VerifyFinal ......................................................................................................................... 136
5.15.5 C_VerifyRecoverInit .............................................................................................................. 137
5.15.6 C_VerifyRecover ................................................................................................................... 137
5.16 Message-based functions for verifying signatures and MACs ..................................................... 139
5.16.1 C_MessageVerifyInit ............................................................................................................. 139
5.16.2 C_VerifyMessage .................................................................................................................. 139
5.16.3 C_VerifyMessageBegin ......................................................................................................... 140
5.16.4 C_VerifyMessageNext ........................................................................................................... 140
5.16.5 C_MessageVerifyFinal .......................................................................................................... 141
5.17 Dual-function cryptographic functions .......................................................................................... 141
5.17.1 C_DigestEncryptUpdate ........................................................................................................ 141
5.17.2 C_DecryptDigestUpdate ........................................................................................................ 144
5.17.3 C_SignEncryptUpdate ........................................................................................................... 147
5.17.4 C_DecryptVerifyUpdate ......................................................................................................... 149
5.18 Key management functions .......................................................................................................... 152
5.18.1 C_GenerateKey ..................................................................................................................... 152
5.18.2 C_GenerateKeyPair .............................................................................................................. 153
5.18.3 C_WrapKey ........................................................................................................................... 155
5.18.4 C_UnwrapKey ....................................................................................................................... 156
5.18.5 C_DeriveKey ......................................................................................................................... 158
5.19 Random number generation functions ......................................................................................... 160
5.19.1 C_SeedRandom .................................................................................................................... 160
5.19.2 C_GenerateRandom ............................................................................................................. 160
5.20 Parallel function management functions ....................................................................................... 161
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 8 of 168
5.20.1 C_GetFunctionStatus ............................................................................................................ 161
5.20.2 C_CancelFunction ................................................................................................................. 161
5.21 Callback functions ......................................................................................................................... 162
5.21.1 Surrender callbacks ............................................................................................................... 162
5.21.2 Vendor-defined callbacks ...................................................................................................... 162
6 PKCS #11 Implementation Conformance ........................................................................................ 163
Appendix A. Acknowledgments ........................................................................................................... 164
Appendix B. Manifest constants .......................................................................................................... 167
Appendix C. Revision History .............................................................................................................. 168
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 9 of 168
1 Introduction 1
This document describes the basic PKCS#11 token interface and token behavior. 2
The PKCS#11 standard specifies an application programming interface (API), called “Cryptoki,” for 3 devices that hold cryptographic information and perform cryptographic functions. Cryptoki follows a 4 simple object based approach, addressing the goals of technology independence (any kind of device) and 5 resource sharing (multiple applications accessing multiple devices), presenting to applications a common, 6 logical view of the device called a “cryptographic token”. 7
This document specifies the data types and functions available to an application requiring cryptographic 8 services using the ANSI C programming language. The supplier of a Cryptoki library implementation 9 typically provides these data types and functions via ANSI C header files. Generic ANSI C header files 10 for Cryptoki are available from the PKCS#11 web page. This document and up-to-date errata for Cryptoki 11 will also be available from the same place. 12
Additional documents may provide a generic, language-independent Cryptoki interface and/or bindings 13 between Cryptoki and other programming languages. 14
Cryptoki isolates an application from the details of the cryptographic device. The application does not 15 have to change to interface to a different type of device or to run in a different environment; thus, the 16 application is portable. How Cryptoki provides this isolation is beyond the scope of this document, 17 although some conventions for the support of multiple types of device will be addressed here and 18 possibly in a separate document. 19
Details of cryptographic mechanisms (algorithms) may be found in the associated PKCS#11 Mechanisms 20 documents. 21
1.1 IPR Policy 22
This specification is provided under the RF on RAND Terms Mode of the OASIS IPR Policy, the mode 23 chosen when the Technical Committee was established. For information on whether any patents have 24 been disclosed that may be essential to implementing this specification, and any offers of patent licensing 25 terms, please refer to the Intellectual Property Rights section of the TC's web page (https://www.oasis-26 open.org/committees/pkcs11/ipr.php). 27
1.2 Terminology 28
The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD 29 NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described 30 in [RFC2119]. 31
1.3 Definitions 32
For the purposes of this standard, the following definitions apply: 33
API Application programming interface. 34
Application Any computer program that calls the Cryptoki interface. 35
ASN.1 Abstract Syntax Notation One, as defined in X.680. 36
Attribute A characteristic of an object. 37
BER Basic Encoding Rules, as defined in X.690. 38
CBC Cipher-Block Chaining mode, as defined in FIPS PUB 81. 39
Certificate A signed message binding a subject name and a public key, or a 40 subject name and a set of attributes. 41
CMS Cryptographic Message Syntax (see RFC 5652) 42
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 10 of 168
Cryptographic Device A device storing cryptographic information and possibly performing 43 cryptographic functions. May be implemented as a smart card, 44 smart disk, PCMCIA card, or with some other technology, including 45 software-only. 46
Cryptoki The Cryptographic Token Interface defined in this standard. 47
Cryptoki library A library that implements the functions specified in this standard. 48
DER Distinguished Encoding Rules, as defined in X.690. 49
DES Data Encryption Standard, as defined in FIPS PUB 46-3. 50
DSA Digital Signature Algorithm, as defined in FIPS PUB 186-4. 51
EC Elliptic Curve 52
ECB Electronic Codebook mode, as defined in FIPS PUB 81. 53
IV Initialization Vector. 54
MAC Message Authentication Code. 55
Mechanism A process for implementing a cryptographic operation. 56
Object An item that is stored on a token. May be data, a certificate, or a 57 key. 58
PIN Personal Identification Number. 59
PKCS Public-Key Cryptography Standards. 60
PRF Pseudo random function. 61
PTD Personal Trusted Device, as defined in MeT-PTD 62
RSA The RSA public-key cryptosystem. 63
Reader The means by which information is exchanged with a device. 64
Session A logical connection between an application and a token. 65
Slot A logical reader that potentially contains a token. 66
SSL The Secure Sockets Layer 3.0 protocol. 67
Subject Name The X.500 distinguished name of the entity to which a key is 68 assigned. 69
SO A Security Officer user. 70
TLS Transport Layer Security. 71
Token The logical view of a cryptographic device defined by Cryptoki. 72
User The person using an application that interfaces to Cryptoki. 73
UTF-8 Universal Character Set (UCS) transformation format (UTF) that 74 represents ISO 10646 and UNICODE strings with a variable number 75 of octets. 76
WIM Wireless Identification Module. 77
WTLS Wireless Transport Layer Security. 78
1.4 Symbols and abbreviations 79
The following symbols are used in this standard: 80
Table 1, Symbols 81
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 11 of 168
Symbol Definition
N/A Not applicable
R/O Read-only
R/W Read/write
The following prefixes are used in this standard: 82
Table 2, Prefixes 83
Prefix Description
C_ Function
CK_ Data type or general constant
CKA_ Attribute
CKC_ Certificate type
CKD_ Key derivation function
CKF_ Bit flag
CKG_ Mask generation function
CKH_ Hardware feature type
CKK_ Key type
CKM_ Mechanism type
CKN_ Notification
CKO_ Object class
CKP_ Pseudo-random function
CKS_ Session state
CKR_ Return value
CKU_ User type
CKZ_ Salt/Encoding parameter source
h a handle
ul a CK_ULONG
p a pointer
pb a pointer to a CK_BYTE
ph a pointer to a handle
pul a pointer to a CK_ULONG
84
Cryptoki is based on ANSI C types, and defines the following data types: 85
86
/* an unsigned 8-bit value */ 87 typedef unsigned char CK_BYTE; 88 89 /* an unsigned 8-bit character */ 90 typedef CK_BYTE CK_CHAR; 91 92 /* an 8-bit UTF-8 character */ 93 typedef CK_BYTE CK_UTF8CHAR; 94 95 /* a BYTE-sized Boolean flag */ 96 typedef CK_BYTE CK_BBOOL; 97 98 /* an unsigned value, at least 32 bits long */ 99
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 12 of 168
typedef unsigned long int CK_ULONG; 100 101 /* a signed value, the same size as a CK_ULONG */ 102 typedef long int CK_LONG; 103 104 /* at least 32 bits; each bit is a Boolean flag */ 105 typedef CK_ULONG CK_FLAGS; 106 107
Cryptoki also uses pointers to some of these data types, as well as to the type void, which are 108 implementation-dependent. These pointer types are: 109
CK_BYTE_PTR /* Pointer to a CK_BYTE */ 110 CK_CHAR_PTR /* Pointer to a CK_CHAR */ 111 CK_UTF8CHAR_PTR /* Pointer to a CK_UTF8CHAR */ 112 CK_ULONG_PTR /* Pointer to a CK_ULONG */ 113 CK_VOID_PTR /* Pointer to a void */ 114 115
Cryptoki also defines a pointer to a CK_VOID_PTR, which is implementation-dependent: 116
CK_VOID_PTR_PTR /* Pointer to a CK_VOID_PTR */ 117 118
In addition, Cryptoki defines a C-style NULL pointer, which is distinct from any valid pointer: 119
NULL_PTR /* A NULL pointer */ 120 121
It follows that many of the data and pointer types will vary somewhat from one environment to another 122 (e.g., a CK_ULONG will sometimes be 32 bits, and sometimes perhaps 64 bits). However, these details 123 should not affect an application, assuming it is compiled with Cryptoki header files consistent with the 124 Cryptoki library to which the application is linked. 125
All numbers and values expressed in this document are decimal, unless they are preceded by “0x”, in 126 which case they are hexadecimal values. 127
The CK_CHAR data type holds characters from the following table, taken from ANSI C: 128
Table 3, Character Set 129
Category Characters
Letters A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z
Numbers 0 1 2 3 4 5 6 7 8 9
Graphic characters ! “ # % & ‘ ( ) * + , - . / : ; < = > ? [ \ ] ^ _ { | } ~
Blank character ‘ ‘
The CK_UTF8CHAR data type holds UTF-8 encoded Unicode characters as specified in RFC2279. UTF-130 8 allows internationalization while maintaining backward compatibility with the Local String definition of 131 PKCS #11 version 2.01. 132
In Cryptoki, the CK_BBOOL data type is a Boolean type that can be true or false. A zero value means 133 false, and a nonzero value means true. Similarly, an individual bit flag, CKF_..., can also be set (true) or 134 unset (false). For convenience, Cryptoki defines the following macros for use with values of type 135 CK_BBOOL: 136
#define CK_FALSE 0 137 #define CK_TRUE 1 138 139
For backwards compatibility, header files for this version of Cryptoki also define TRUE and FALSE as 140 (CK_DISABLE_TRUE_FALSE may be set by the application vendor): 141
#ifndef CK_DISABLE_TRUE_FALSE 142
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 13 of 168
#ifndef FALSE 143 #define FALSE CK_FALSE 144 #endif 145 146 #ifndef TRUE 147 #define TRUE CK_TRUE 148 #endif 149 #endif 150 151
1.5 Normative References 152
[FIPS PUB 46-3] NIST. FIPS 46-3: Data Encryption Standard. October 1999. 153 URL: http://csrc.nist.gov/publications/fips/fips46-3/fips46-3.pdf 154
[FIPS PUB 81] NIST. FIPS 81: DES Modes of Operation. December 1980. 155 URL: http://csrc.nist.gov/publications/fips/fips81/fips81.htm 156
[FIPS PUB 186-4] NIST. FIPS 186-4: Digital Signature Standard. July, 2013. 157 URL: http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-4.pdf 158
[PKCS11-Curr] PKCS #11 Cryptographic Token Interface Current Mechanisms Specification 159 Version 2.40. Edited by Susan Gleeson and Chris Zimman. 14 April 2015. OASIS 160 Standard. http://docs.oasis-open.org/pkcs11/pkcs11-curr/v2.40/os/pkcs11-curr-161 v2.40-os.html. Latest version: http://docs.oasis-open.org/pkcs11/pkcs11-162 curr/v2.40/pkcs11-curr-v2.40.html. 163
[PKCS11-Hist] PKCS #11 Cryptographic Token Interface Historical Mechanisms Specification 164 Version 2.40. Edited by Susan Gleeson and Chris Zimman. 14 April 2015. OASIS 165 Standard. http://docs.oasis-open.org/pkcs11/pkcs11-hist/v2.40/os/pkcs11-hist-166 v2.40-os.html. Latest version: http://docs.oasis-open.org/pkcs11/pkcs11-167 hist/v2.40/pkcs11-hist-v2.40.html. 168
[PKCS11-Prof] PKCS #11 Cryptographic Token Interface Profiles Version 2.40. Edited by Tim 169 Hudson. 14 April 2015. OASIS Standard. http://docs.oasis-170 open.org/pkcs11/pkcs11-profiles/v2.40/os/pkcs11-profiles-v2.40-os.html. Latest 171 version: http://docs.oasis-open.org/pkcs11/pkcs11-profiles/v2.40/pkcs11-profiles-172 v2.40.html. 173
[PKCS #1] RSA Laboratories. RSA Cryptography Standard. v2.1, June 14, 2002. 174 URL: ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-1/pkcs-1v2-1.pdf 175
[PKCS #3] RSA Laboratories. Diffie-Hellman Key-Agreement Standard. v1.4, November 176 1993. 177 URL: ftp://ftp.rsasecurity.com/pub/pkcs/doc/pkcs-3.doc 178
[PKCS #5] RSA Laboratories. Password-Based Encryption Standard. v2.0, March 25, 1999 179 URL: ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-5v2/pkcs5v2-0.pdf 180
[PKCS #7] RSA Laboratories. Cryptographic Message Syntax Standard. v1.5, November 181 1993 182 URL : ftp://ftp.rsasecurity.com/pub/pkcs/doc/pkcs-7.doc 183
[PKCS #8] RSA Laboratories. Private-Key Information Syntax Standard. v1.2, November 184 1993. 185 URL: ftp://ftp.rsasecurity.com/pub/pkcs/doc/pkcs-8.doc 186
[PKCS11-UG] PKCS #11 Cryptographic Token Interface Usage Guide Version 2.40. Edited by 187 John Leiseboer and Robert Griffin. 16 November 2014. OASIS Committee Note 188 02. http://docs.oasis-open.org/pkcs11/pkcs11-ug/v2.40/cn02/pkcs11-ug-v2.40-189 cn02.html. Latest version: http://docs.oasis-open.org/pkcs11/pkcs11-190 ug/v2.40/pkcs11-ug-v2.40.html. 191
[PKCS #12] RSA Laboratories. Personal Information Exchange Syntax Standard. v1.0, 192 June 1999. 193
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 14 of 168
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels”, BCP 194 14, RFC 2119, March 1997. 195 URL: http://www.ietf.org/rfc/rfc2119.txt. 196
[RFC 2279] F. Yergeau. RFC 2279: UTF-8, a transformation format of ISO 10646 Alis 197 Technologies, January 1998. 198 URL: http://www.ietf.org/rfc/rfc2279.txt 199
[RFC 2534] Masinter, L., Wing, D., Mutz, A., and K. Holtman. RFC 2534: Media Features for 200 Display, Print, and Fax. March 1999. 201 URL: http://www.ietf.org/rfc/rfc2534.txt 202
[RFC 5652] R. Housley. RFC 5652: Cryptographic Message Syntax. Septmber 2009. URL: 203 http://www.ietf.org/rfc/rfc5652.txt 204
[RFC 5707] Rescorla, E., “The Keying Material Exporters for Transport Layer Security (TLS)”, 205 RFC 5705, March 2010. 206 URL: http://www.ietf.org/rfc/rfc5705.txt 207
[TLS] [RFC2246] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0", RFC 2246, 208 January 1999. URL: http://www.ietf.org/rfc/rfc2246.txt, superseded by [RFC4346] 209 Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 210 1.1", RFC 4346, April 2006. URL: http://www.ietf.org/rfc/rfc4346.txt, which was 211 superseded by [TLS12]. 212
[TLS12] [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) 213 Protocol Version 1.2", RFC 5246, August 2008. 214 URL: http://www.ietf.org/rfc/rfc5246.txt 215
[X.500] ITU-T. Information Technology — Open Systems Interconnection — The 216 Directory: Overview of Concepts, Models and Services. February 2001. Identical 217 to ISO/IEC 9594-1 218
[X.509] ITU-T. Information Technology — Open Systems Interconnection — The 219 Directory: Public-key and Attribute Certificate Frameworks. March 2000. 220 Identical to ISO/IEC 9594-8 221
[X.680] ITU-T. Information Technology — Abstract Syntax Notation One (ASN.1): 222 Specification of Basic Notation. July 2002. Identical to ISO/IEC 8824-1 223
[X.690] ITU-T. Information Technology — ASN.1 Encoding Rules: Specification of Basic 224 Encoding Rules (BER), Canonical Encoding Rules (CER), and Distinguished 225 Encoding Rules (DER). July 2002. Identical to ISO/IEC 8825-1 226
227
1.6 Non-Normative References 228
[ANSI C] ANSI/ISO. American National Standard for Programming Languages – C. 1990. 229
[CC/PP] W3C. Composite Capability/Preference Profiles (CC/PP): Structure and 230 Vocabularies. World Wide Web Consortium, January 2004. 231 URL: http://www.w3.org/TR/CCPP-struct-vocab/ 232
[CDPD] Ameritech Mobile Communications et al. Cellular Digital Packet Data System 233 Specifications: Part 406: Airlink Security. 1993. 234
[GCS-API] X/Open Company Ltd. Generic Cryptographic Service API (GCS-API), Base - 235 Draft 2. February 14, 1995. 236
[ISO/IEC 7816-1] ISO. Information Technology — Identification Cards — Integrated Circuit(s) with 237 Contacts — Part 1: Physical Characteristics. 1998. 238
[ISO/IEC 7816-4] ISO. Information Technology — Identification Cards — Integrated Circuit(s) with 239 Contacts — Part 4: Interindustry Commands for Interchange. 1995. 240
[ISO/IEC 8824-1] ISO. Information Technology-- Abstract Syntax Notation One (ASN.1): 241 Specification of Basic Notation. 2002. 242
[ISO/IEC 8825-1] ISO. Information Technology—ASN.1 Encoding Rules: Specification of Basic 243 Encoding Rules (BER), Canonical Encoding Rules (CER), and Distinguished 244 Encoding Rules (DER). 2002. 245
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 15 of 168
[ISO/IEC 9594-1] ISO. Information Technology — Open Systems Interconnection — The Directory: 246 Overview of Concepts, Models and Services. 2001. 247
[ISO/IEC 9594-8] ISO. Information Technology — Open Systems Interconnection — The Directory: 248 Public-key and Attribute Certificate Frameworks. 2001 249
[ISO/IEC 9796-2] ISO. Information Technology — Security Techniques — Digital Signature 250 Scheme Giving Message Recovery — Part 2: Integer factorization based 251 mechanisms. 2002. 252
[Java MIDP] Java Community Process. Mobile Information Device Profile for Java 2 Micro 253 Edition. November 2002. 254 URL: http://jcp.org/jsr/detail/118.jsp 255
[MeT-PTD] MeT. MeT PTD Definition – Personal Trusted Device Definition, Version 1.0, 256 February 2003. 257 URL: http://www.mobiletransaction.org 258
[PCMCIA] Personal Computer Memory Card International Association. PC Card Standard, 259 Release 2.1,. July 1993. 260
[SEC 1] Standards for Efficient Cryptography Group (SECG). Standards for Efficient 261 Cryptography (SEC) 1: Elliptic Curve Cryptography. Version 1.0, September 20, 262 2000. 263
[SEC 2] Standards for Efficient Cryptography Group (SECG). Standards for Efficient 264 Cryptography (SEC) 2: Recommended Elliptic Curve Domain Parameters. 265 Version 1.0, September 20, 2000. 266
[WIM] WAP. Wireless Identity Module. — WAP-260-WIM-20010712-a. July 2001. 267 URL: 268 http://technical.openmobilealliance.org/tech/affiliates/LicenseAgreement.asp?Doc269 Name=/wap/wap-260-wim-20010712-a.pdf 270
[WPKI] Wireless Application Protocol: Public Key Infrastructure Definition. — WAP-217-271 WPKI-20010424-a. April 2001. 272 URL: 273 http://technical.openmobilealliance.org/tech/affiliates/LicenseAgreement.asp?Doc274 Name=/wap/wap-217-wpki-20010424-a.pdf 275
[WTLS] WAP. Wireless Transport Layer Security Version — WAP-261-WTLS-20010406-276 a. April 2001. 277 URL: 278 http://technical.openmobilealliance.org/tech/affiliates/LicenseAgreement.asp?Doc279 Name=/wap/wap-261-wtls-20010406-a.pdf 280
281
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 16 of 168
2 Platform- and compiler-dependent directives for C 282
or C++ 283
There is a large array of Cryptoki-related data types that are defined in the Cryptoki header files. Certain 284 packing and pointer-related aspects of these types are platform and compiler-dependent; these aspects 285 are therefore resolved on a platform-by-platform (or compiler-by-compiler) basis outside of the Cryptoki 286 header files by means of preprocessor directives. 287
This means that when writing C or C++ code, certain preprocessor directives MUST be issued before 288 including a Cryptoki header file. These directives are described in the remainder of this section. 289
Plattform specific implementation hints can be found in the pkcs11.h header file. 290
2.1 Structure packing 291
Cryptoki structures are packed to occupy as little space as is possible. Cryptoki structures SHALL be 292 packed with 1-byte alignment. 293
2.2 Pointer-related macros 294
Because different platforms and compilers have different ways of dealing with different types of pointers, 295 the following 6 macros SHALL be set outside the scope of Cryptoki: 296
CK_PTR 297
CK_PTR is the “indirection string” a given platform and compiler uses to make a pointer to an object. It is 298
used in the following fashion: 299
typedef CK_BYTE CK_PTR CK_BYTE_PTR; 300
CK_DECLARE_FUNCTION 301
CK_DECLARE_FUNCTION(returnType, name), when followed by a parentheses-enclosed 302
list of arguments and a semicolon, declares a Cryptoki API function in a Cryptoki library. returnType is 303
the return type of the function, and name is its name. It SHALL be used in the following fashion: 304
CK_DECLARE_FUNCTION(CK_RV, C_Initialize)( 305 CK_VOID_PTR pReserved 306 ); 307
CK_DECLARE_FUNCTION_POINTER 308
CK_DECLARE_FUNCTION_POINTER(returnType, name), when followed by a 309
parentheses-enclosed list of arguments and a semicolon, declares a variable or type which is a pointer to 310 a Cryptoki API function in a Cryptoki library. returnType is the return type of the function, and name is its 311 name. It SHALL be used in either of the following fashions to define a function pointer variable, 312 myC_Initialize, which can point to a C_Initialize function in a Cryptoki library (note that neither of the 313 following code snippets actually assigns a value to myC_Initialize): 314
CK_DECLARE_FUNCTION_POINTER(CK_RV, myC_Initialize)( 315 CK_VOID_PTR pReserved 316 ); 317 318
or: 319
typedef CK_DECLARE_FUNCTION_POINTER(CK_RV, myC_InitializeType)( 320
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 17 of 168
CK_VOID_PTR pReserved 321 ); 322 myC_InitializeType myC_Initialize; 323
CK_CALLBACK_FUNCTION 324
CK_CALLBACK_FUNCTION(returnType, name), when followed by a parentheses-enclosed 325
list of arguments and a semicolon, declares a variable or type which is a pointer to an application callback 326 function that can be used by a Cryptoki API function in a Cryptoki library. returnType is the return type of 327 the function, and name is its name. It SHALL be used in either of the following fashions to define a 328 function pointer variable, myCallback, which can point to an application callback which takes arguments 329 args and returns a CK_RV (note that neither of the following code snippets actually assigns a value to 330 myCallback): 331
CK_CALLBACK_FUNCTION(CK_RV, myCallback)(args); 332 333
or: 334
typedef CK_CALLBACK_FUNCTION(CK_RV, myCallbackType)(args); 335 myCallbackType myCallback; 336
NULL_PTR 337
NULL_PTR is the value of a NULL pointer. In any ANSI C environment—and in many others as well—338
NULL_PTR SHALL be defined simply as 0. 339
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 18 of 168
3 General data types 340
The general Cryptoki data types are described in the following subsections. The data types for holding 341 parameters for various mechanisms, and the pointers to those parameters, are not described here; these 342 types are described with the information on the mechanisms themselves, in Section 12. 343
A C or C++ source file in a Cryptoki application or library can define all these types (the types described 344 here and the types that are specifically used for particular mechanism parameters) by including the top-345 level Cryptoki include file, pkcs11.h. pkcs11.h, in turn, includes the other Cryptoki include files, pkcs11t.h 346 and pkcs11f.h. A source file can also include just pkcs11t.h (instead of pkcs11.h); this defines most (but 347 not all) of the types specified here. 348
When including either of these header files, a source file MUST specify the preprocessor directives 349 indicated in Section 2. 350
3.1 General information 351
Cryptoki represents general information with the following types: 352
CK_VERSION; CK_VERSION_PTR 353
CK_VERSION is a structure that describes the version of a Cryptoki interface, a Cryptoki library, or an 354 SSL or TLS implementation, or the hardware or firmware version of a slot or token. It is defined as 355 follows: 356
typedef struct CK_VERSION { 357 CK_BYTE major; 358 CK_BYTE minor; 359 } CK_VERSION; 360 361
The fields of the structure have the following meanings: 362
major major version number (the integer portion of the version) 363
minor minor version number (the hundredths portion of the version) 364
Example: For version 1.0, major = 1 and minor = 0. For version 2.10, major = 2 and minor = 10. Table 4 365 below lists the major and minor version values for the officially published Cryptoki specifications. 366
Table 4, Major and minor version values for published Cryptoki specifications 367
Version major minor
1.0 0x01 0x00
2.01 0x02 0x01
2.10 0x02 0x0a
2.11 0x02 0x0b
2.20 0x02 0x14
2.30 0x02 0x1e
2.40 0x02 0x28
3.0 0x03 0x00
Minor revisions of the Cryptoki standard are always upwardly compatible within the same major version 368 number. 369
CK_VERSION_PTR is a pointer to a CK_VERSION. 370
CK_INFO; CK_INFO_PTR 371
CK_INFO provides general information about Cryptoki. It is defined as follows: 372
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 19 of 168
typedef struct CK_INFO { 373 CK_VERSION cryptokiVersion; 374 CK_UTF8CHAR manufacturerID[32]; 375 CK_FLAGS flags; 376 CK_UTF8CHAR libraryDescription[32]; 377 CK_VERSION libraryVersion; 378 } CK_INFO; 379 380
The fields of the structure have the following meanings: 381
cryptokiVersion Cryptoki interface version number, for compatibility with future 382 revisions of this interface 383
manufacturerID ID of the Cryptoki library manufacturer. MUST be padded with the 384 blank character (‘ ‘). Should not be null-terminated. 385
flags bit flags reserved for future versions. MUST be zero for this version 386
libraryDescription character-string description of the library. MUST be padded with the 387 blank character (‘ ‘). Should not be null-terminated. 388
libraryVersion Cryptoki library version number 389
For libraries written to this document, the value of cryptokiVersion should match the version of this 390 specification; the value of libraryVersion is the version number of the library software itself. 391
CK_INFO_PTR is a pointer to a CK_INFO. 392
CK_NOTIFICATION 393
CK_NOTIFICATION holds the types of notifications that Cryptoki provides to an application. It is defined 394 as follows: 395
typedef CK_ULONG CK_NOTIFICATION; 396 397
For this version of Cryptoki, the following types of notifications are defined: 398
CKN_SURRENDER 399 400
The notifications have the following meanings: 401
CKN_SURRENDER Cryptoki is surrendering the execution of a function executing in a 402 session so that the application may perform other operations. After 403 performing any desired operations, the application should indicate 404 to Cryptoki whether to continue or cancel the function (see Section 405 5.21.1). 406
3.2 Slot and token types 407
Cryptoki represents slot and token information with the following types: 408
CK_SLOT_ID; CK_SLOT_ID_PTR 409
CK_SLOT_ID is a Cryptoki-assigned value that identifies a slot. It is defined as follows: 410
typedef CK_ULONG CK_SLOT_ID; 411 412
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 20 of 168
A list of CK_SLOT_IDs is returned by C_GetSlotList. A priori, any value of CK_SLOT_ID can be a valid 413 slot identifier—in particular, a system may have a slot identified by the value 0. It need not have such a 414 slot, however. 415
CK_SLOT_ID_PTR is a pointer to a CK_SLOT_ID. 416
CK_SLOT_INFO; CK_SLOT_INFO_PTR 417
CK_SLOT_INFO provides information about a slot. It is defined as follows: 418
typedef struct CK_SLOT_INFO { 419 CK_UTF8CHAR slotDescription[64]; 420 CK_UTF8CHAR manufacturerID[32]; 421 CK_FLAGS flags; 422 CK_VERSION hardwareVersion; 423 CK_VERSION firmwareVersion; 424 } CK_SLOT_INFO; 425 426
The fields of the structure have the following meanings: 427
slotDescription character-string description of the slot. MUST be padded with the 428 blank character (‘ ‘). MUST NOT be null-terminated. 429
manufacturerID ID of the slot manufacturer. MUST be padded with the blank 430 character (‘ ‘). MUST NOT be null-terminated. 431
flags bits flags that provide capabilities of the slot. The flags are defined 432 below 433
hardwareVersion version number of the slot’s hardware 434
firmwareVersion version number of the slot’s firmware 435
The following table defines the flags field: 436
Table 5, Slot Information Flags 437
Bit Flag Mask Meaning
CKF_TOKEN_PRESENT 0x00000001 True if a token is present in the slot (e.g., a device is in the reader)
CKF_REMOVABLE_DEVICE 0x00000002 True if the reader supports removable devices
CKF_HW_SLOT 0x00000004 True if the slot is a hardware slot, as opposed to a software slot implementing a “soft token”
For a given slot, the value of the CKF_REMOVABLE_DEVICE flag never changes. In addition, if this flag 438 is not set for a given slot, then the CKF_TOKEN_PRESENT flag for that slot is always set. That is, if a 439 slot does not support a removable device, then that slot always has a token in it. 440
CK_SLOT_INFO_PTR is a pointer to a CK_SLOT_INFO. 441
CK_TOKEN_INFO; CK_TOKEN_INFO_PTR 442
CK_TOKEN_INFO provides information about a token. It is defined as follows: 443
typedef struct CK_TOKEN_INFO { 444 CK_UTF8CHAR label[32]; 445
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 21 of 168
CK_UTF8CHAR manufacturerID[32]; 446 CK_UTF8CHAR model[16]; 447 CK_CHAR serialNumber[16]; 448 CK_FLAGS flags; 449 CK_ULONG ulMaxSessionCount; 450 CK_ULONG ulSessionCount; 451 CK_ULONG ulMaxRwSessionCount; 452 CK_ULONG ulRwSessionCount; 453 CK_ULONG ulMaxPinLen; 454 CK_ULONG ulMinPinLen; 455 CK_ULONG ulTotalPublicMemory; 456 CK_ULONG ulFreePublicMemory; 457 CK_ULONG ulTotalPrivateMemory; 458 CK_ULONG ulFreePrivateMemory; 459 CK_VERSION hardwareVersion; 460 CK_VERSION firmwareVersion; 461 CK_CHAR utcTime[16]; 462 } CK_TOKEN_INFO; 463 464
The fields of the structure have the following meanings: 465
label application-defined label, assigned during token initialization. MUST 466 be padded with the blank character (‘ ‘). MUST NOT be null-467 terminated. 468
manufacturerID ID of the device manufacturer. MUST be padded with the blank 469 character (‘ ‘). MUST NOT be null-terminated. 470
model model of the device. MUST be padded with the blank character (‘ ‘). 471 MUST NOT be null-terminated. 472
serialNumber character-string serial number of the device. MUST be padded with 473 the blank character (‘ ‘). MUST NOT be null-terminated. 474
flags bit flags indicating capabilities and status of the device as defined 475 below 476
ulMaxSessionCount maximum number of sessions that can be opened with the token at 477 one time by a single application (see CK_TOKEN_INFO Note 478 below) 479
ulSessionCount number of sessions that this application currently has open with the 480 token (see CK_TOKEN_INFO Note below) 481
ulMaxRwSessionCount maximum number of read/write sessions that can be opened with 482 the token at one time by a single application (see 483 CK_TOKEN_INFO Note below) 484
ulRwSessionCount number of read/write sessions that this application currently has 485 open with the token (see CK_TOKEN_INFO Note below) 486
ulMaxPinLen maximum length in bytes of the PIN 487
ulMinPinLen minimum length in bytes of the PIN 488
ulTotalPublicMemory the total amount of memory on the token in bytes in which public 489 objects may be stored (see CK_TOKEN_INFO Note below) 490
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 22 of 168
ulFreePublicMemory the amount of free (unused) memory on the token in bytes for public 491 objects (see CK_TOKEN_INFO Note below) 492
ulTotalPrivateMemory the total amount of memory on the token in bytes in which private 493 objects may be stored (see CK_TOKEN_INFO Note below) 494
ulFreePrivateMemory the amount of free (unused) memory on the token in bytes for 495 private objects (see CK_TOKEN_INFO Note below) 496
hardwareVersion version number of hardware 497
firmwareVersion version number of firmware 498
utcTime current time as a character-string of length 16, represented in the 499 format YYYYMMDDhhmmssxx (4 characters for the year; 2 500 characters each for the month, the day, the hour, the minute, and 501 the second; and 2 additional reserved ‘0’ characters). The value of 502 this field only makes sense for tokens equipped with a clock, as 503 indicated in the token information flags (see below) 504
The following table defines the flags field: 505
Table 6, Token Information Flags 506
Bit Flag Mask Meaning
CKF_RNG 0x00000001 True if the token has its own random number generator
CKF_WRITE_PROTECTED 0x00000002 True if the token is write-protected (see below)
CKF_LOGIN_REQUIRED 0x00000004 True if there are some cryptographic functions that a user MUST be logged in to perform
CKF_USER_PIN_INITIALIZED 0x00000008 True if the normal user’s PIN has been initialized
CKF_RESTORE_KEY_NOT_NEEDED 0x00000020 True if a successful save of a session’s cryptographic operations state always contains all keys needed to restore the state of the session
CKF_CLOCK_ON_TOKEN 0x00000040 True if token has its own hardware clock
CKF_PROTECTED_AUTHENTICATION_PATH
0x00000100 True if token has a “protected authentication path”, whereby a user can log into the token without passing a PIN through the Cryptoki library
CKF_DUAL_CRYPTO_OPERATIONS 0x00000200 True if a single session with the token can perform dual cryptographic operations (see Section 5.14)
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 23 of 168
Bit Flag Mask Meaning
CKF_TOKEN_INITIALIZED 0x00000400 True if the token has been initialized using C_InitToken or an equivalent mechanism outside the scope of this standard. Calling C_InitToken when this flag is set will cause the token to be reinitialized.
CKF_SECONDARY_AUTHENTICATION 0x00000800 True if the token supports secondary authentication for private key objects. (Deprecated; new implementations MUST NOT set this flag)
CKF_USER_PIN_COUNT_LOW 0x00010000 True if an incorrect user login PIN has been entered at least once since the last successful authentication.
CKF_USER_PIN_FINAL_TRY 0x00020000 True if supplying an incorrect user PIN will cause it to become locked.
CKF_USER_PIN_LOCKED 0x00040000 True if the user PIN has been locked. User login to the token is not possible.
CKF_USER_PIN_TO_BE_CHANGED 0x00080000 True if the user PIN value is the default value set by token initialization or manufacturing, or the PIN has been expired by the card.
CKF_SO_PIN_COUNT_LOW 0x00100000 True if an incorrect SO login PIN has been entered at least once since the last successful authentication.
CKF_SO_PIN_FINAL_TRY 0x00200000 True if supplying an incorrect SO PIN will cause it to become locked.
CKF_SO_PIN_LOCKED 0x00400000 True if the SO PIN has been locked. SO login to the token is not possible.
CKF_SO_PIN_TO_BE_CHANGED 0x00800000 True if the SO PIN value is the default value set by token initialization or manufacturing, or the PIN has been expired by the card.
CKF_ERROR_STATE
0x01000000 True if the token failed a FIPS 140-2 self-test and entered an error state.
Exactly what the CKF_WRITE_PROTECTED flag means is not specified in Cryptoki. An application may 507 be unable to perform certain actions on a write-protected token; these actions can include any of the 508 following, among others: 509
• Creating/modifying/deleting any object on the token. 510
• Creating/modifying/deleting a token object on the token. 511
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 24 of 168
• Changing the SO’s PIN. 512
• Changing the normal user’s PIN. 513
The token may change the value of the CKF_WRITE_PROTECTED flag depending on the session state 514 to implement its object management policy. For instance, the token may set the 515 CKF_WRITE_PROTECTED flag unless the session state is R/W SO or R/W User to implement a policy 516 that does not allow any objects, public or private, to be created, modified, or deleted unless the user has 517 successfully called C_Login. 518
The CKF_USER_PIN_COUNT_LOW, CKF_USER_PIN_COUNT_LOW, CKF_USER_PIN_FINAL_TRY, 519 and CKF_SO_PIN_FINAL_TRY flags may always be set to false if the token does not support the 520 functionality or will not reveal the information because of its security policy. 521
The CKF_USER_PIN_TO_BE_CHANGED and CKF_SO_PIN_TO_BE_CHANGED flags may always be 522 set to false if the token does not support the functionality. If a PIN is set to the default value, or has 523 expired, the appropriate CKF_USER_PIN_TO_BE_CHANGED or CKF_SO_PIN_TO_BE_CHANGED 524 flag is set to true. When either of these flags are true, logging in with the corresponding PIN will succeed, 525 but only the C_SetPIN function can be called. Calling any other function that required the user to be 526 logged in will cause CKR_PIN_EXPIRED to be returned until C_SetPIN is called successfully. 527
CK_TOKEN_INFO Note: The fields ulMaxSessionCount, ulSessionCount, ulMaxRwSessionCount, 528 ulRwSessionCount, ulTotalPublicMemory, ulFreePublicMemory, ulTotalPrivateMemory, and 529 ulFreePrivateMemory can have the special value CK_UNAVAILABLE_INFORMATION, which means that 530 the token and/or library is unable or unwilling to provide that information. In addition, the fields 531 ulMaxSessionCount and ulMaxRwSessionCount can have the special value 532 CK_EFFECTIVELY_INFINITE, which means that there is no practical limit on the number of sessions 533 (resp. R/W sessions) an application can have open with the token. 534
It is important to check these fields for these special values. This is particularly true for 535 CK_EFFECTIVELY_INFINITE, since an application seeing this value in the ulMaxSessionCount or 536 ulMaxRwSessionCount field would otherwise conclude that it can’t open any sessions with the token, 537 which is far from being the case. 538
The upshot of all this is that the correct way to interpret (for example) the ulMaxSessionCount field is 539 something along the lines of the following: 540
CK_TOKEN_INFO info; 541 . 542 . 543 if ((CK_LONG) info.ulMaxSessionCount 544 == CK_UNAVAILABLE_INFORMATION) { 545 /* Token refuses to give value of ulMaxSessionCount */ 546 . 547 . 548 } else if (info.ulMaxSessionCount == CK_EFFECTIVELY_INFINITE) { 549 /* Application can open as many sessions as it wants */ 550 . 551 . 552 } else { 553 /* ulMaxSessionCount really does contain what it should */ 554 . 555 . 556 } 557 558
CK_TOKEN_INFO_PTR is a pointer to a CK_TOKEN_INFO. 559
3.3 Session types 560
Cryptoki represents session information with the following types: 561
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 25 of 168
CK_SESSION_HANDLE; CK_SESSION_HANDLE_PTR 562
CK_SESSION_HANDLE is a Cryptoki-assigned value that identifies a session. It is defined as follows: 563
typedef CK_ULONG CK_SESSION_HANDLE; 564 565
Valid session handles in Cryptoki always have nonzero values. For developers’ convenience, Cryptoki 566 defines the following symbolic value: 567
CK_INVALID_HANDLE 568 569
CK_SESSION_HANDLE_PTR is a pointer to a CK_SESSION_HANDLE. 570
CK_USER_TYPE 571
CK_USER_TYPE holds the types of Cryptoki users described in [PKCS11-UG] and, in addition, a 572 context-specific type described in Section 4.9. It is defined as follows: 573
typedef CK_ULONG CK_USER_TYPE; 574 575
For this version of Cryptoki, the following types of users are defined: 576
CKU_SO 577 CKU_USER 578 CKU_CONTEXT_SPECIFIC 579
CK_STATE 580
CK_STATE holds the session state, as described in [PKCS11-UG]. It is defined as follows: 581
typedef CK_ULONG CK_STATE; 582 583
For this version of Cryptoki, the following session states are defined: 584
CKS_RO_PUBLIC_SESSION 585 CKS_RO_USER_FUNCTIONS 586 CKS_RW_PUBLIC_SESSION 587 CKS_RW_USER_FUNCTIONS 588 CKS_RW_SO_FUNCTIONS 589
CK_SESSION_INFO; CK_SESSION_INFO_PTR 590
CK_SESSION_INFO provides information about a session. It is defined as follows: 591
typedef struct CK_SESSION_INFO { 592 CK_SLOT_ID slotID; 593 CK_STATE state; 594 CK_FLAGS flags; 595 CK_ULONG ulDeviceError; 596 } CK_SESSION_INFO; 597 598
599
The fields of the structure have the following meanings: 600
slotID ID of the slot that interfaces with the token 601
state the state of the session 602
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 26 of 168
flags bit flags that define the type of session; the flags are defined below 603
ulDeviceError an error code defined by the cryptographic device. Used for errors 604 not covered by Cryptoki. 605
The following table defines the flags field: 606
Table 7, Session Information Flags 607
Bit Flag Mask Meaning
CKF_RW_SESSION 0x00000002 True if the session is read/write; false if the session is read-only
CKF_SERIAL_SESSION 0x00000004 This flag is provided for backward compatibility, and should always be set to true
CK_SESSION_INFO_PTR is a pointer to a CK_SESSION_INFO. 608
3.4 Object types 609
Cryptoki represents object information with the following types: 610
CK_OBJECT_HANDLE; CK_OBJECT_HANDLE_PTR 611
CK_OBJECT_HANDLE is a token-specific identifier for an object. It is defined as follows: 612
typedef CK_ULONG CK_OBJECT_HANDLE; 613 614
When an object is created or found on a token by an application, Cryptoki assigns it an object handle for 615 that application’s sessions to use to access it. A particular object on a token does not necessarily have a 616 handle which is fixed for the lifetime of the object; however, if a particular session can use a particular 617 handle to access a particular object, then that session will continue to be able to use that handle to 618 access that object as long as the session continues to exist, the object continues to exist, and the object 619 continues to be accessible to the session. 620
Valid object handles in Cryptoki always have nonzero values. For developers’ convenience, Cryptoki 621 defines the following symbolic value: 622
CK_INVALID_HANDLE 623 624
CK_OBJECT_HANDLE_PTR is a pointer to a CK_OBJECT_HANDLE. 625
CK_OBJECT_CLASS; CK_OBJECT_CLASS_PTR 626
CK_OBJECT_CLASS is a value that identifies the classes (or types) of objects that Cryptoki recognizes. 627
It is defined as follows: 628
typedef CK_ULONG CK_OBJECT_CLASS; 629 630
Object classes are defined with the objects that use them. The type is specified on an object through the 631 CKA_CLASS attribute of the object. 632
Vendor defined values for this type may also be specified. 633
CKO_VENDOR_DEFINED 634 635
Object classes CKO_VENDOR_DEFINED and above are permanently reserved for token vendors. For 636 interoperability, vendors should register their object classes through the PKCS process. 637
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 27 of 168
CK_OBJECT_CLASS_PTR is a pointer to a CK_OBJECT_CLASS. 638
CK_HW_FEATURE_TYPE 639
CK_HW_FEATURE_TYPE is a value that identifies a hardware feature type of a device. It is defined as 640 follows: 641
typedef CK_ULONG CK_HW_FEATURE_TYPE; 642 643
Hardware feature types are defined with the objects that use them. The type is specified on an object 644 through the CKA_HW_FEATURE_TYPE attribute of the object. 645
Vendor defined values for this type may also be specified. 646
CKH_VENDOR_DEFINED 647 648
Feature types CKH_VENDOR_DEFINED and above are permanently reserved for token vendors. For 649 interoperability, vendors should register their feature types through the PKCS process. 650
CK_KEY_TYPE 651
CK_KEY_TYPE is a value that identifies a key type. It is defined as follows: 652
typedef CK_ULONG CK_KEY_TYPE; 653 654
Key types are defined with the objects and mechanisms that use them. The key type is specified on an 655 object through the CKA_KEY_TYPE attribute of the object. 656
Vendor defined values for this type may also be specified. 657
CKK_VENDOR_DEFINED 658 659
Key types CKK_VENDOR_DEFINED and above are permanently reserved for token vendors. For 660 interoperability, vendors should register their key types through the PKCS process. 661
CK_CERTIFICATE_TYPE 662
CK_CERTIFICATE_TYPE is a value that identifies a certificate type. It is defined as follows: 663
typedef CK_ULONG CK_CERTIFICATE_TYPE; 664 665
Certificate types are defined with the objects and mechanisms that use them. The certificate type is 666 specified on an object through the CKA_CERTIFICATE_TYPE attribute of the object. 667
Vendor defined values for this type may also be specified. 668
CKC_VENDOR_DEFINED 669 670
Certificate types CKC_VENDOR_DEFINED and above are permanently reserved for token vendors. For 671 interoperability, vendors should register their certificate types through the PKCS process. 672
CK_CERTIFICATE_CATEGORY 673
CK_CERTIFICATE_CATEGORY is a value that identifies a certificate category. It is defined as follows: 674
typedef CK_ULONG CK_CERTIFICATE_CATEGORY; 675 676
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 28 of 168
For this version of Cryptoki, the following certificate categories are defined: 677
Constant Value Meaning
CK_CERTIFICATE_CATEGORY_UNSPECIFIED 0x00000000UL No category specified
CK_CERTIFICATE_CATEGORY_TOKEN_USER 0x00000001UL Certificate belongs to owner of the token
CK_CERTIFICATE_CATEGORY_AUTHORITY 0x00000002UL Certificate belongs to a certificate authority
CK_CERTIFICATE_CATEGORY_OTHER_ENTITY 0x00000003UL Certificate belongs to an end entity (i.e.: not a CA)
CK_ATTRIBUTE_TYPE 678
CK_ATTRIBUTE_TYPE is a value that identifies an attribute type. It is defined as follows: 679
typedef CK_ULONG CK_ATTRIBUTE_TYPE; 680 681
Attributes are defined with the objects and mechanisms that use them. Attributes are specified on an 682 object as a list of type, length value items. These are often specified as an attribute template. 683
Vendor defined values for this type may also be specified. 684
CKA_VENDOR_DEFINED 685 686
Attribute types CKA_VENDOR_DEFINED and above are permanently reserved for token vendors. For 687 interoperability, vendors should register their attribute types through the PKCS process. 688
CK_ATTRIBUTE; CK_ATTRIBUTE_PTR 689
CK_ATTRIBUTE is a structure that includes the type, value, and length of an attribute. It is defined as 690 follows: 691
typedef struct CK_ATTRIBUTE { 692 CK_ATTRIBUTE_TYPE type; 693 CK_VOID_PTR pValue; 694 CK_ULONG ulValueLen; 695 } CK_ATTRIBUTE; 696 697
The fields of the structure have the following meanings: 698
type the attribute type 699
pValue pointer to the value of the attribute 700
ulValueLen length in bytes of the value 701
If an attribute has no value, then ulValueLen = 0, and the value of pValue is irrelevant. An array of 702 CK_ATTRIBUTEs is called a “template” and is used for creating, manipulating and searching for objects. 703 The order of the attributes in a template never matters, even if the template contains vendor-specific 704 attributes. Note that pValue is a “void” pointer, facilitating the passing of arbitrary values. Both the 705 application and Cryptoki library MUST ensure that the pointer can be safely cast to the expected type 706 (i.e., without word-alignment errors). 707
708
The constant CK_UNAVAILABLE_INFORMATION is used in the ulValueLen field to denote an invalid or 709 unavailable value. See C_GetAttributeValue for further details. 710
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 29 of 168
711
CK_ATTRIBUTE_PTR is a pointer to a CK_ATTRIBUTE. 712
CK_DATE 713
CK_DATE is a structure that defines a date. It is defined as follows: 714
typedef struct CK_DATE { 715 CK_CHAR year[4]; 716 CK_CHAR month[2]; 717 CK_CHAR day[2]; 718 } CK_DATE; 719 720
The fields of the structure have the following meanings: 721
year the year (“1900” - “9999”) 722
month the month (“01” - “12”) 723
day the day (“01” - “31”) 724
The fields hold numeric characters from the character set in Table 3, not the literal byte values. 725
When a Cryptoki object carries an attribute of this type, and the default value of the attribute is specified 726 to be "empty," then Cryptoki libraries SHALL set the attribute's ulValueLen to 0. 727
Note that implementations of previous versions of Cryptoki may have used other methods to identify an 728 "empty" attribute of type CK_DATE, and applications that needs to interoperate with these libraries 729 therefore have to be flexible in what they accept as an empty value. 730
CK_PROFILE_ID; CK_PROFILE_ID_PTR 731
CK_PROFILE_ID is an unsigend ulong value represting a specific token profile. It is defined as follows: 732
typedef CK_ULONG CK_PROFILE_ID; 733 734
Profiles are defines in the PKCS #11 Cryptographic Token Interface Profiles document. s. ID's greater 735 than 0xffffffff may cause compatibility issues on platforms that have CK_ULONG values of 32 bits, and 736 should be avoided. 737
Vendor defined values for this type may also be specified. 738
CKP_VENDOR_DEFINED 739 740
Profile IDs CKP_VENDOR_DEFINED and above are permanently reserved for token vendors. For 741 interoperability, vendors should register their object classes through the PKCS process. 742
743
Valid Profile IDs in Cryptoki always have nonzero values. For developers’ convenience, Cryptoki defines 744 the following symbolic value: 745
CKP_INVALID_ID 746
CK_PROFILE_ID_PTR is a pointer to a CK_PROFILE_ID. 747
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 30 of 168
CK_JAVA_MIDP_SECURITY_DOMAIN 748
CK_JAVA_MIDP_SECURITY_DOMAIN is a value that identifies the Java MIDP security domain of a 749 certificate. It is defined as follows: 750
typedef CK_ULONG CK_JAVA_MIDP_SECURITY_DOMAIN; 751
For this version of Cryptoki, the following security domains are defined. See the Java MIDP specification 752 for further information: 753
Constant Value Meaning
CK_SECURITY_DOMAIN_UNSPECIFIED 0x00000000UL No domain specified
CK_SECURITY_DOMAIN_MANUFACTURER 0x00000001UL Manufacturer protection domain
CK_SECURITY_DOMAIN_OPERATOR 0x00000002UL Operator protection domain
CK_SECURITY_DOMAIN_THIRD_PARTY 0x00000003UL Third party protection domain
754
3.5 Data types for mechanisms 755
Cryptoki supports the following types for describing mechanisms and parameters to them: 756
CK_MECHANISM_TYPE; CK_MECHANISM_TYPE_PTR 757
CK_MECHANISM_TYPE is a value that identifies a mechanism type. It is defined as follows: 758
typedef CK_ULONG CK_MECHANISM_TYPE; 759 760
Mechanism types are defined with the objects and mechanism descriptions that use them. 761
Vendor defined values for this type may also be specified. 762
CKM_VENDOR_DEFINED 763 764
Mechanism types CKM_VENDOR_DEFINED and above are permanently reserved for token vendors. 765 For interoperability, vendors should register their mechanism types through the PKCS process. 766
CK_MECHANISM_TYPE_PTR is a pointer to a CK_MECHANISM_TYPE. 767
CK_MECHANISM; CK_MECHANISM_PTR 768
CK_MECHANISM is a structure that specifies a particular mechanism and any parameters it requires. It 769 is defined as follows: 770
typedef struct CK_MECHANISM { 771 CK_MECHANISM_TYPE mechanism; 772 CK_VOID_PTR pParameter; 773 CK_ULONG ulParameterLen; 774 } CK_MECHANISM; 775 776
The fields of the structure have the following meanings: 777
mechanism the type of mechanism 778
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 31 of 168
pParameter pointer to the parameter if required by the mechanism 779
ulParameterLen length in bytes of the parameter 780
Note that pParameter is a “void” pointer, facilitating the passing of arbitrary values. Both the application 781 and the Cryptoki library MUST ensure that the pointer can be safely cast to the expected type (i.e., 782 without word-alignment errors). 783
CK_MECHANISM_PTR is a pointer to a CK_MECHANISM. 784
CK_MECHANISM_INFO; CK_MECHANISM_INFO_PTR 785
CK_MECHANISM_INFO is a structure that provides information about a particular mechanism. It is 786 defined as follows: 787
typedef struct CK_MECHANISM_INFO { 788 CK_ULONG ulMinKeySize; 789 CK_ULONG ulMaxKeySize; 790 CK_FLAGS flags; 791 } CK_MECHANISM_INFO; 792 793
The fields of the structure have the following meanings: 794
ulMinKeySize the minimum size of the key for the mechanism (whether this is 795 measured in bits or in bytes is mechanism-dependent) 796
ulMaxKeySize the maximum size of the key for the mechanism (whether this is 797 measured in bits or in bytes is mechanism-dependent) 798
flags bit flags specifying mechanism capabilities 799
For some mechanisms, the ulMinKeySize and ulMaxKeySize fields have meaningless values. 800
The following table defines the flags field: 801
Table 8, Mechanism Information Flags 802
Bit Flag Mask Meaning
CKF_HW 0x00000001 True if the mechanism is performed by the device; false if the mechanism is performed in software
CKF_MESSAGE_ENCRYPT 0x00000002 True if the mechanism can be used with C_MessageEncryptInit
CKF_MESSAGE_DECRYPT 0x00000004 True if the mechanism can be used with C_MessageDecryptInit
CKF_MESSAGE_SIGN 0x00000008 True if the mechanism can be used with C_MessageSignInit
CKF_MESSAGE_VERIFY 0x00000010 True if the mechanism can be used with C_MessageVerifyInit
CKF_MULTI_MESSAGE 0x00000020 True if the mechanism can be used with C_*MessageBegin. One of CKF_MESSAGE_* flag must also be set.
CKF_FIND_OBJECTS 0x00000040 This flag can be passed in as a parameter to C_SessionCancel to cancel an active object search operation. Any other use of this flag is outside the scope of this standard.
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 32 of 168
Bit Flag Mask Meaning
CKF_ENCRYPT 0x00000100 True if the mechanism can be used with C_EncryptInit
CKF_DECRYPT 0x00000200 True if the mechanism can be used with C_DecryptInit
CKF_DIGEST 0x00000400 True if the mechanism can be used with C_DigestInit
CKF_SIGN 0x00000800 True if the mechanism can be used with C_SignInit
CKF_SIGN_RECOVER 0x00001000 True if the mechanism can be used with C_SignRecoverInit
CKF_VERIFY 0x00002000 True if the mechanism can be used with C_VerifyInit
CKF_VERIFY_RECOVER 0x00004000 True if the mechanism can be used with C_VerifyRecoverInit
CKF_GENERATE 0x00008000 True if the mechanism can be used with C_GenerateKey
CKF_GENERATE_KEY_PAIR 0x00010000 True if the mechanism can be used with C_GenerateKeyPair
CKF_WRAP 0x00020000 True if the mechanism can be used with C_WrapKey
CKF_UNWRAP 0x00040000 True if the mechanism can be used with C_UnwrapKey
CKF_DERIVE 0x00080000 True if the mechanism can be used with C_DeriveKey
CKF_EXTENSION 0x80000000 True if there is an extension to the flags; false if no extensions. MUST be false for this version.
CK_MECHANISM_INFO_PTR is a pointer to a CK_MECHANISM_INFO. 803
3.6 Function types 804
Cryptoki represents information about functions with the following data types: 805
CK_RV 806
CK_RV is a value that identifies the return value of a Cryptoki function. It is defined as follows: 807
typedef CK_ULONG CK_RV; 808 809
Vendor defined values for this type may also be specified. 810
CKR_VENDOR_DEFINED 811 812
Section 5.1 defines the meaning of each CK_RV value. Return values CKR_VENDOR_DEFINED and 813 above are permanently reserved for token vendors. For interoperability, vendors should register their 814 return values through the PKCS process. 815
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 33 of 168
CK_NOTIFY 816
CK_NOTIFY is the type of a pointer to a function used by Cryptoki to perform notification callbacks. It is 817 defined as follows: 818
typedef CK_CALLBACK_FUNCTION(CK_RV, CK_NOTIFY)( 819 CK_SESSION_HANDLE hSession, 820 CK_NOTIFICATION event, 821 CK_VOID_PTR pApplication 822 ); 823 824
The arguments to a notification callback function have the following meanings: 825
hSession The handle of the session performing the callback 826
event The type of notification callback 827
pApplication An application-defined value. This is the same value as was passed 828 to C_OpenSession to open the session performing the callback 829
CK_C_XXX 830
Cryptoki also defines an entire family of other function pointer types. For each function C_XXX in the 831 Cryptoki API (see Section 4.12 for detailed information about each of them), Cryptoki defines a type 832 CK_C_XXX, which is a pointer to a function with the same arguments and return value as C_XXX has. 833 An appropriately-set variable of type CK_C_XXX may be used by an application to call the Cryptoki 834 function C_XXX. 835
CK_FUNCTION_LIST; CK_FUNCTION_LIST_PTR; 836
CK_FUNCTION_LIST_PTR_PTR 837
CK_FUNCTION_LIST is a structure which contains a Cryptoki version and a function pointer to each 838 function in the Cryptoki API. It is defined as follows: 839
typedef struct CK_FUNCTION_LIST { 840 CK_VERSION version; 841 CK_C_Initialize C_Initialize; 842 CK_C_Finalize C_Finalize; 843 CK_C_GetInfo C_GetInfo; 844 CK_C_GetFunctionList C_GetFunctionList; 845 CK_C_GetSlotList C_GetSlotList; 846 CK_C_GetSlotInfo C_GetSlotInfo; 847 CK_C_GetTokenInfo C_GetTokenInfo; 848 CK_C_GetMechanismList C_GetMechanismList; 849 CK_C_GetMechanismInfo C_GetMechanismInfo; 850 CK_C_InitToken C_InitToken; 851 CK_C_InitPIN C_InitPIN; 852 CK_C_SetPIN C_SetPIN; 853 CK_C_OpenSession C_OpenSession; 854 CK_C_CloseSession C_CloseSession; 855 CK_C_CloseAllSessions C_CloseAllSessions; 856 CK_C_GetSessionInfo C_GetSessionInfo; 857 858 CK_C_GetOperationState C_GetOperationState; 859 CK_C_SetOperationState C_SetOperationState; 860 CK_C_Login C_Login; 861 CK_C_Logout C_Logout; 862 CK_C_CreateObject C_CreateObject; 863 CK_C_CopyObject C_CopyObject; 864 CK_C_DestroyObject C_DestroyObject; 865
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 34 of 168
CK_C_GetObjectSize C_GetObjectSize; 866 CK_C_GetAttributeValue C_GetAttributeValue; 867 CK_C_SetAttributeValue C_SetAttributeValue; 868 CK_C_FindObjectsInit C_FindObjectsInit; 869 CK_C_FindObjects C_FindObjects; 870 CK_C_FindObjectsFinal C_FindObjectsFinal; 871 CK_C_EncryptInit C_EncryptInit; 872 CK_C_Encrypt C_Encrypt; 873 CK_C_EncryptUpdate C_EncryptUpdate; 874 CK_C_EncryptFinal C_EncryptFinal; 875 CK_C_DecryptInit C_DecryptInit; 876 CK_C_Decrypt C_Decrypt; 877 CK_C_DecryptUpdate C_DecryptUpdate; 878 CK_C_DecryptFinal C_DecryptFinal; 879 CK_C_DigestInit C_DigestInit; 880 CK_C_Digest C_Digest; 881 CK_C_DigestUpdate C_DigestUpdate; 882 CK_C_DigestKey C_DigestKey; 883 CK_C_DigestFinal C_DigestFinal; 884 CK_C_SignInit C_SignInit; 885 CK_C_Sign C_Sign; 886 CK_C_SignUpdate C_SignUpdate; 887 CK_C_SignFinal C_SignFinal; 888 CK_C_SignRecoverInit C_SignRecoverInit; 889 CK_C_SignRecover C_SignRecover; 890 CK_C_VerifyInit C_VerifyInit; 891 CK_C_Verify C_Verify; 892 CK_C_VerifyUpdate C_VerifyUpdate; 893 CK_C_VerifyFinal C_VerifyFinal; 894 CK_C_VerifyRecoverInit C_VerifyRecoverInit; 895 CK_C_VerifyRecover C_VerifyRecover; 896 CK_C_DigestEncryptUpdate C_DigestEncryptUpdate; 897 CK_C_DecryptDigestUpdate C_DecryptDigestUpdate; 898 CK_C_SignEncryptUpdate C_SignEncryptUpdate; 899 CK_C_DecryptVerifyUpdate C_DecryptVerifyUpdate; 900 CK_C_GenerateKey C_GenerateKey; 901 CK_C_GenerateKeyPair C_GenerateKeyPair; 902 CK_C_WrapKey C_WrapKey; 903 CK_C_UnwrapKey C_UnwrapKey; 904 CK_C_DeriveKey C_DeriveKey; 905 CK_C_SeedRandom C_SeedRandom; 906 CK_C_GenerateRandom C_GenerateRandom; 907 CK_C_GetFunctionStatus C_GetFunctionStatus; 908 CK_C_CancelFunction C_CancelFunction; 909 CK_C_WaitForSlotEvent C_WaitForSlotEvent; 910 } CK_FUNCTION_LIST; 911 912
Each Cryptoki library has a static CK_FUNCTION_LIST structure, and a pointer to it (or to a copy of it 913 which is also owned by the library) may be obtained by the C_GetFunctionList function (see Section 914 5.2). The value that this pointer points to can be used by an application to quickly find out where the 915 executable code for each function in the Cryptoki API is located. Every function in the Cryptoki API 916 MUST have an entry point defined in the Cryptoki library’s CK_FUNCTION_LIST structure. If a particular 917 function in the Cryptoki API is not supported by a library, then the function pointer for that function in the 918 library’s CK_FUNCTION_LIST structure should point to a function stub which simply returns 919 CKR_FUNCTION_NOT_SUPPORTED. 920
In this structure ‘version’ is the cryptoki specification version number. The major and minor versions must 921 be set to 0x02 and 0x28 indicating a version 2.40 compatible structure. The updated function list table for 922 this version of the specification may be returned via C_GetInterfaceList or C_GetInterface. 923
924
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 35 of 168
An application may or may not be able to modify a Cryptoki library’s static CK_FUNCTION_LIST 925 structure. Whether or not it can, it should never attempt to do so. 926
PKCS #11 modules must not add new functions at the end of the CK_FUNCTION_LIST that are not 927 contained within the defined structure. If a PKCS#11 module needs to define additional functions, they 928 should be placed within a vendor defined interface returned via C_GetInterfaceList or C_GetInterface. 929
CK_FUNCTION_LIST_PTR is a pointer to a CK_FUNCTION_LIST. 930
CK_FUNCTION_LIST_PTR_PTR is a pointer to a CK_FUNCTION_LIST_PTR. 931
932
CK_FUNCTION_LIST_3_0; CK_FUNCTION_LIST_3_0_PTR; 933
CK_FUNCTION_LIST_3_0_PTR_PTR 934
CK_FUNCTION_LIST_3_0 is a structure which contains the same function pointers as in 935 CK_FUNCTION_LIST and additional functions added to the end of the structure that were defined in 936 Cryptoki version 3.0. It is defined as follows: 937
typedef struct CK_FUNCTION_LIST_3_0 { 938 CK_VERSION version; 939 CK_C_Initialize C_Initialize; 940 CK_C_Finalize C_Finalize; 941 CK_C_GetInfo C_GetInfo; 942 CK_C_GetFunctionList C_GetFunctionList; 943 CK_C_GetSlotList C_GetSlotList; 944 CK_C_GetSlotInfo C_GetSlotInfo; 945 CK_C_GetTokenInfo C_GetTokenInfo; 946 CK_C_GetMechanismList C_GetMechanismList; 947 CK_C_GetMechanismInfo C_GetMechanismInfo; 948 CK_C_InitToken C_InitToken; 949 CK_C_InitPIN C_InitPIN; 950 CK_C_SetPIN C_SetPIN; 951 CK_C_OpenSession C_OpenSession; 952 CK_C_CloseSession C_CloseSession; 953 CK_C_CloseAllSessions C_CloseAllSessions; 954 CK_C_GetSessionInfo C_GetSessionInfo; 955 CK_C_GetOperationState C_GetOperationState; 956 CK_C_SetOperationState C_SetOperationState; 957 CK_C_Login C_Login; 958 CK_C_Logout C_Logout; 959 CK_C_CreateObject C_CreateObject; 960 CK_C_CopyObject C_CopyObject; 961 CK_C_DestroyObject C_DestroyObject; 962 CK_C_GetObjectSize C_GetObjectSize; 963 CK_C_GetAttributeValue C_GetAttributeValue; 964 CK_C_SetAttributeValue C_SetAttributeValue; 965 CK_C_FindObjectsInit C_FindObjectsInit; 966 CK_C_FindObjects C_FindObjects; 967 CK_C_FindObjectsFinal C_FindObjectsFinal; 968 CK_C_EncryptInit C_EncryptInit; 969 CK_C_Encrypt C_Encrypt; 970 CK_C_EncryptUpdate C_EncryptUpdate; 971 CK_C_EncryptFinal C_EncryptFinal; 972 CK_C_DecryptInit C_DecryptInit; 973 CK_C_Decrypt C_Decrypt; 974 CK_C_DecryptUpdate C_DecryptUpdate; 975 CK_C_DecryptFinal C_DecryptFinal; 976 CK_C_DigestInit C_DigestInit; 977 CK_C_Digest C_Digest; 978 CK_C_DigestUpdate C_DigestUpdate; 979 CK_C_DigestKey C_DigestKey; 980 CK_C_DigestFinal C_DigestFinal; 981
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 36 of 168
CK_C_SignInit C_SignInit; 982 CK_C_Sign C_Sign; 983 CK_C_SignUpdate C_SignUpdate; 984 CK_C_SignFinal C_SignFinal; 985 CK_C_SignRecoverInit C_SignRecoverInit; 986 CK_C_SignRecover C_SignRecover; 987 CK_C_VerifyInit C_VerifyInit; 988 CK_C_Verify C_Verify; 989 CK_C_VerifyUpdate C_VerifyUpdate; 990 CK_C_VerifyFinal C_VerifyFinal; 991 CK_C_VerifyRecoverInit C_VerifyRecoverInit; 992 CK_C_VerifyRecover C_VerifyRecover; 993 CK_C_DigestEncryptUpdate C_DigestEncryptUpdate; 994 CK_C_DecryptDigestUpdate C_DecryptDigestUpdate; 995 CK_C_SignEncryptUpdate C_SignEncryptUpdate; 996 CK_C_DecryptVerifyUpdate C_DecryptVerifyUpdate; 997 CK_C_GenerateKey C_GenerateKey; 998 CK_C_GenerateKeyPair C_GenerateKeyPair; 999 CK_C_WrapKey C_WrapKey; 1000 CK_C_UnwrapKey C_UnwrapKey; 1001 CK_C_DeriveKey C_DeriveKey; 1002 CK_C_SeedRandom C_SeedRandom; 1003 CK_C_GenerateRandom C_GenerateRandom; 1004 CK_C_GetFunctionStatus C_GetFunctionStatus; 1005 CK_C_CancelFunction C_CancelFunction; 1006 CK_C_WaitForSlotEvent C_WaitForSlotEvent; 1007 CK_C_GetInterfaceList C_GetInterfaceList; 1008 CK_C_GetInterface C_GetInterface; 1009 CK_C_LoginUser C_LoginUser; 1010 CK_C_SessionCancel C_SessionCancel; 1011 CK_C_MessageEncryptInit C_MessageEncryptInit; 1012 CK_C_EncryptMessage C_EncryptMessage; 1013 CK_C_EncryptMessageBegin C_EncryptMessageBegin; 1014 CK_C_EncryptMessageNext C_EncryptMessageNext; 1015 CK_C_MessageEncryptFinal C_MessageEncryptFinal; 1016 CK_C_MessageDecryptInit C_MessageDecryptInit; 1017 CK_C_DecryptMessage C_DecryptMessage; 1018 CK_C_DecryptMessageBegin C_DecryptMessageBegin; 1019 CK_C_DecryptMessageNext C_DecryptMessageNext; 1020 CK_C_MessageDecryptFinal C_MessageDecryptFinal; 1021 CK_C_MessageSignInit C_MessageSignInit; 1022 CK_C_SignMessage C_SignMessage; 1023 CK_C_SignMessageBegin C_SignMessageBegin; 1024 CK_C_SignMessageNext C_SignMessageNext; 1025 CK_C_MessageSignFinal C_MessageSignFinal; 1026 CK_C_MessageVerifyInit C_MessageVerifyInit; 1027 CK_C_VerifyMessage C_VerifyMessage; 1028 CK_C_VerifyMessageBegin C_VerifyMessageBegin; 1029 CK_C_VerifyMessageNext C_VerifyMessageNext; 1030 CK_C_MessageVerifyFinal C_MessageVerifyFinal; 1031 } CK_FUNCTION_LIST_3_0; 1032 1033
For a general description of CK_FUNCTION_LIST_3_0 see CK_FUNCTION_LIST. 1034
In this structure, version is the cryptoki specification version number. It should match the value of 1035 cryptokiVersion returned in the CK_INFO structure, but must be 3.0 at minimum. 1036
This function list may be returned via C_GetInterfaceList or C_GetInterface 1037
CK_FUNCTION_LIST_3_0_PTR is a pointer to a CK_FUNCTION_LIST_3_0. 1038
CK_FUNCTION_LIST_3_0_PTR_PTR is a pointer to a CK_FUNCTION_LIST_3_0_PTR. 1039
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 37 of 168
CK_INTERFACE; CK_INTERFACE_PTR; CK_INTERFACE_PTR_PTR 1040
CK_INTERFACE is a structure which contains an interface name with a function list and flag. 1041
It is defined as follows: 1042
typedef struct CK_INTERFACE { 1043 CK_UTF8CHAR_PTR pInterfaceName; 1044 CK_VOID_PTR pFunctionList; 1045 CK_FLAGS flags; 1046 } CK_INTERFACE; 1047
1048
The fields of the structure have the following meanings: 1049
pInterfaceName the name of the interface 1050
pFunctionList the interface function list which must always begin with a 1051 CK_VERSION structure as the first field 1052
flags bit flags specifying interface capabilities 1053
The interface name “PKCS 11” is reserved for use by interfaces defined within the cryptoki specification. 1054
Interfaces starting with the string: “Vendor ” are reserved for vendor use and will not oetherwise be 1055 defined as interfaces in the PKCS #11 specification. Vendors should supply new functions with interface 1056 names of “Vendor {vendor name}”. For example “Vendor ACME Inc”. 1057
1058
The following table defines the flags field: 1059
Table 9, CK_INTERFACE Flags 1060
Bit Flag Mask Meaning
CKF_INTERFACE_FORK_SAFE 0x00000001 The returned interface will have fork tolerant semantics. When the application forks, each process will get its own copy of all session objects, session states, login states, and encryption states. Each process will also maintain access to token objects with their previously supplied handles.
1061
CK_INTERFACE_PTR is a pointer to a CK_INTERFACE. 1062
CK_INTERFACE_PTR_PTR is a pointer to a CK_INTERFACE_PTR. 1063
3.7 Locking-related types 1064
The types in this section are provided solely for applications which need to access Cryptoki from multiple 1065 threads simultaneously. Applications which will not do this need not use any of these types. 1066
CK_CREATEMUTEX 1067
CK_CREATEMUTEX is the type of a pointer to an application-supplied function which creates a new 1068 mutex object and returns a pointer to it. It is defined as follows: 1069
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 38 of 168
typedef CK_CALLBACK_FUNCTION(CK_RV, CK_CREATEMUTEX)( 1070 CK_VOID_PTR_PTR ppMutex 1071 ); 1072 1073
Calling a CK_CREATEMUTEX function returns the pointer to the new mutex object in the location pointed 1074 to by ppMutex. Such a function should return one of the following values: 1075
CKR_OK, CKR_GENERAL_ERROR 1076 CKR_HOST_MEMORY 1077
CK_DESTROYMUTEX 1078
CK_DESTROYMUTEX is the type of a pointer to an application-supplied function which destroys an 1079 existing mutex object. It is defined as follows: 1080
typedef CK_CALLBACK_FUNCTION(CK_RV, CK_DESTROYMUTEX)( 1081 CK_VOID_PTR pMutex 1082 ); 1083 1084
The argument to a CK_DESTROYMUTEX function is a pointer to the mutex object to be destroyed. Such 1085 a function should return one of the following values: 1086
CKR_OK, CKR_GENERAL_ERROR 1087 CKR_HOST_MEMORY 1088 CKR_MUTEX_BAD 1089
CK_LOCKMUTEX and CK_UNLOCKMUTEX 1090
CK_LOCKMUTEX is the type of a pointer to an application-supplied function which locks an existing 1091 mutex object. CK_UNLOCKMUTEX is the type of a pointer to an application-supplied function which 1092 unlocks an existing mutex object. The proper behavior for these types of functions is as follows: 1093
• If a CK_LOCKMUTEX function is called on a mutex which is not locked, the calling thread obtains a 1094 lock on that mutex and returns. 1095
• If a CK_LOCKMUTEX function is called on a mutex which is locked by some thread other than the 1096 calling thread, the calling thread blocks and waits for that mutex to be unlocked. 1097
• If a CK_LOCKMUTEX function is called on a mutex which is locked by the calling thread, the 1098 behavior of the function call is undefined. 1099
• If a CK_UNLOCKMUTEX function is called on a mutex which is locked by the calling thread, that 1100 mutex is unlocked and the function call returns. Furthermore: 1101
o If exactly one thread was blocking on that particular mutex, then that thread stops blocking, 1102 obtains a lock on that mutex, and its CK_LOCKMUTEX call returns. 1103
o If more than one thread was blocking on that particular mutex, then exactly one of the 1104 blocking threads is selected somehow. That lucky thread stops blocking, obtains a lock on 1105 the mutex, and its CK_LOCKMUTEX call returns. All other threads blocking on that particular 1106 mutex continue to block. 1107
• If a CK_UNLOCKMUTEX function is called on a mutex which is not locked, then the function call 1108 returns the error code CKR_MUTEX_NOT_LOCKED. 1109
• If a CK_UNLOCKMUTEX function is called on a mutex which is locked by some thread other than the 1110 calling thread, the behavior of the function call is undefined. 1111
CK_LOCKMUTEX is defined as follows: 1112
typedef CK_CALLBACK_FUNCTION(CK_RV, CK_LOCKMUTEX)( 1113 CK_VOID_PTR pMutex 1114 ); 1115
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 39 of 168
1116
The argument to a CK_LOCKMUTEX function is a pointer to the mutex object to be locked. Such a 1117 function should return one of the following values: 1118
CKR_OK, CKR_GENERAL_ERROR 1119 CKR_HOST_MEMORY, 1120 CKR_MUTEX_BAD 1121 1122
CK_UNLOCKMUTEX is defined as follows: 1123
typedef CK_CALLBACK_FUNCTION(CK_RV, CK_UNLOCKMUTEX)( 1124 CK_VOID_PTR pMutex 1125 ); 1126 1127
The argument to a CK_UNLOCKMUTEX function is a pointer to the mutex object to be unlocked. Such a 1128 function should return one of the following values: 1129
CKR_OK, CKR_GENERAL_ERROR 1130 CKR_HOST_MEMORY 1131 CKR_MUTEX_BAD 1132 CKR_MUTEX_NOT_LOCKED 1133
CK_C_INITIALIZE_ARGS; CK_C_INITIALIZE_ARGS_PTR 1134
CK_C_INITIALIZE_ARGS is a structure containing the optional arguments for the C_Initialize function. 1135 For this version of Cryptoki, these optional arguments are all concerned with the way the library deals 1136 with threads. CK_C_INITIALIZE_ARGS is defined as follows: 1137
typedef struct CK_C_INITIALIZE_ARGS { 1138 CK_CREATEMUTEX CreateMutex; 1139 CK_DESTROYMUTEX DestroyMutex; 1140 CK_LOCKMUTEX LockMutex; 1141 CK_UNLOCKMUTEX UnlockMutex; 1142 CK_FLAGS flags; 1143 CK_VOID_PTR pReserved; 1144 } CK_C_INITIALIZE_ARGS; 1145 1146
The fields of the structure have the following meanings: 1147
CreateMutex pointer to a function to use for creating mutex objects 1148
DestroyMutex pointer to a function to use for destroying mutex objects 1149
LockMutex pointer to a function to use for locking mutex objects 1150
UnlockMutex pointer to a function to use for unlocking mutex objects 1151
flags bit flags specifying options for C_Initialize; the flags are defined 1152 below 1153
pReserved reserved for future use. Should be NULL_PTR for this version of 1154 Cryptoki 1155
The following table defines the flags field: 1156
Table 10, C_Initialize Parameter Flags 1157
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 40 of 168
Bit Flag Mask Meaning
CKF_LIBRARY_CANT_CREATE_OS_THREADS 0x00000001 True if application threads which are executing calls to the library may not use native operating system calls to spawn new threads; false if they may
CKF_OS_LOCKING_OK 0x00000002 True if the library can use the native operation system threading model for locking; false otherwise
CK_C_INITIALIZE_ARGS_PTR is a pointer to a CK_C_INITIALIZE_ARGS. 1158
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 41 of 168
4 Objects 1159
Cryptoki recognizes a number of classes of objects, as defined in the CK_OBJECT_CLASS data type. 1160 An object consists of a set of attributes, each of which has a given value. Each attribute that an object 1161 possesses has precisely one value. The following figure illustrates the high-level hierarchy of the 1162 Cryptoki objects and some of the attributes they support: 1163
Object
Class
Storage Token Private Label Modifiable
Hardware feature
Feature type
Mechanism
Mechanism type
Data Application Object Identifier Value Certificate
Key
Domain parameters
Mechanism type
Profile
Profile ID
1164
Figure 1, Object Attribute Hierarchy 1165
Cryptoki provides functions for creating, destroying, and copying objects in general, and for obtaining and 1166 modifying the values of their attributes. Some of the cryptographic functions (e.g., C_GenerateKey) also 1167 create key objects to hold their results. 1168
Objects are always “well-formed” in Cryptoki—that is, an object always contains all required attributes, 1169 and the attributes are always consistent with one another from the time the object is created. This 1170 contrasts with some object-based paradigms where an object has no attributes other than perhaps a 1171 class when it is created, and is uninitialized for some time. In Cryptoki, objects are always initialized. 1172
Tables throughout most of Section 4 define each Cryptoki attribute in terms of the data type of the 1173 attribute value and the meaning of the attribute, which may include a default initial value. Some of the 1174 data types are defined explicitly by Cryptoki (e.g., CK_OBJECT_CLASS). Attribute values may also take 1175 the following types: 1176
Byte array an arbitrary string (array) of CK_BYTEs 1177
Big integer a string of CK_BYTEs representing an unsigned integer of arbitrary 1178 size, most-significant byte first (e.g., the integer 32768 is 1179 represented as the 2-byte string 0x80 0x00) 1180
Local string an unpadded string of CK_CHARs (see Table 3) with no null-1181 termination 1182
RFC2279 string an unpadded string of CK_UTF8CHARs with no null-termination 1183
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 42 of 168
A token can hold several identical objects, i.e., it is permissible for two or more objects to have exactly the 1184 same values for all their attributes. 1185
In most cases each type of object in the Cryptoki specification possesses a completely well-defined set of 1186 Cryptoki attributes. Some of these attributes possess default values, and need not be specified when 1187 creating an object; some of these default values may even be the empty string (“”). Nonetheless, the 1188 object possesses these attributes. A given object has a single value for each attribute it possesses, even 1189 if the attribute is a vendor-specific attribute whose meaning is outside the scope of Cryptoki. 1190
In addition to possessing Cryptoki attributes, objects may possess additional vendor-specific attributes 1191 whose meanings and values are not specified by Cryptoki. 1192
4.1 Creating, modifying, and copying objects 1193
All Cryptoki functions that create, modify, or copy objects take a template as one of their arguments, 1194 where the template specifies attribute values. Cryptographic functions that create objects (see Section 1195 5.18) may also contribute some additional attribute values themselves; which attributes have values 1196 contributed by a cryptographic function call depends on which cryptographic mechanism is being 1197 performed (see [PKCS11-Curr] and [PKCS11-Hist] for specification of mechanisms for PKCS #11). In 1198 any case, all the required attributes supported by an object class that do not have default values MUST 1199 be specified when an object is created, either in the template or by the function itself. 1200
4.1.1 Creating objects 1201
Objects may be created with the Cryptoki functions C_CreateObject (see Section 5.7), C_GenerateKey, 1202 C_GenerateKeyPair, C_UnwrapKey, and C_DeriveKey (see Section 5.18). In addition, copying an 1203 existing object (with the function C_CopyObject) also creates a new object, but we consider this type of 1204 object creation separately in Section 4.1.3. 1205
Attempting to create an object with any of these functions requires an appropriate template to be 1206 supplied. 1207
1. If the supplied template specifies a value for an invalid attribute, then the attempt should fail with the 1208 error code CKR_ATTRIBUTE_TYPE_INVALID. An attribute is valid if it is either one of the attributes 1209 described in the Cryptoki specification or an additional vendor-specific attribute supported by the library 1210 and token. 1211
2. If the supplied template specifies an invalid value for a valid attribute, then the attempt should fail with 1212 the error code CKR_ATTRIBUTE_VALUE_INVALID. The valid values for Cryptoki attributes are 1213 described in the Cryptoki specification. 1214
3. If the supplied template specifies a value for a read-only attribute, then the attempt should fail with the 1215 error code CKR_ATTRIBUTE_READ_ONLY. Whether or not a given Cryptoki attribute is read-only is 1216 explicitly stated in the Cryptoki specification; however, a particular library and token may be even more 1217 restrictive than Cryptoki specifies. In other words, an attribute which Cryptoki says is not read-only may 1218 nonetheless be read-only under certain circumstances (i.e., in conjunction with some combinations of 1219 other attributes) for a particular library and token. Whether or not a given non-Cryptoki attribute is read-1220 only is obviously outside the scope of Cryptoki. 1221
4. If the attribute values in the supplied template, together with any default attribute values and any 1222 attribute values contributed to the object by the object-creation function itself, are insufficient to fully 1223 specify the object to create, then the attempt should fail with the error code 1224 CKR_TEMPLATE_INCOMPLETE. 1225
5. If the attribute values in the supplied template, together with any default attribute values and any 1226 attribute values contributed to the object by the object-creation function itself, are inconsistent, then the 1227 attempt should fail with the error code CKR_TEMPLATE_INCONSISTENT. A set of attribute values is 1228 inconsistent if not all of its members can be satisfied simultaneously by the token, although each value 1229 individually is valid in Cryptoki. One example of an inconsistent template would be using a template 1230
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 43 of 168
which specifies two different values for the same attribute. Another example would be trying to create 1231 a secret key object with an attribute which is appropriate for various types of public keys or private keys, 1232 but not for secret keys. A final example would be a template with an attribute that violates some token 1233 specific requirement. Note that this final example of an inconsistent template is token-dependent—on 1234 a different token, such a template might not be inconsistent. 1235
6. If the supplied template specifies the same value for a particular attribute more than once (or the 1236 template specifies the same value for a particular attribute that the object-creation function itself 1237 contributes to the object), then the behavior of Cryptoki is not completely specified. The attempt to 1238 create an object can either succeed—thereby creating the same object that would have been created 1239 if the multiply-specified attribute had only appeared once—or it can fail with error code 1240 CKR_TEMPLATE_INCONSISTENT. Library developers are encouraged to make their libraries behave 1241 as though the attribute had only appeared once in the template; application developers are strongly 1242 encouraged never to put a particular attribute into a particular template more than once. 1243
If more than one of the situations listed above applies to an attempt to create an object, then the error 1244 code returned from the attempt can be any of the error codes from above that applies. 1245
4.1.2 Modifying objects 1246
Objects may be modified with the Cryptoki function C_SetAttributeValue (see Section 5.7). The 1247 template supplied to C_SetAttributeValue can contain new values for attributes which the object already 1248 possesses; values for attributes which the object does not yet possess; or both. 1249
Some attributes of an object may be modified after the object has been created, and some may not. In 1250 addition, attributes which Cryptoki specifies are modifiable may actually not be modifiable on some 1251 tokens. That is, if a Cryptoki attribute is described as being modifiable, that really means only that it is 1252 modifiable insofar as the Cryptoki specification is concerned. A particular token might not actually 1253 support modification of some such attributes. Furthermore, whether or not a particular attribute of an 1254 object on a particular token is modifiable might depend on the values of certain attributes of the object. 1255 For example, a secret key object’s CKA_SENSITIVE attribute can be changed from CK_FALSE to 1256 CK_TRUE, but not the other way around. 1257
All the scenarios in Section 4.1.1—and the error codes they return—apply to modifying objects with 1258 C_SetAttributeValue, except for the possibility of a template being incomplete. 1259
4.1.3 Copying objects 1260
Unless an object's CKA_COPYABLE (see Table 17) attribute is set to CK_FALSE, it may be copied with 1261 the Cryptoki function C_CopyObject (see Section 5.7). In the process of copying an object, 1262 C_CopyObject also modifies the attributes of the newly-created copy according to an application-1263 supplied template. 1264
The Cryptoki attributes which can be modified during the course of a C_CopyObject operation are the 1265 same as the Cryptoki attributes which are described as being modifiable, plus the four special attributes 1266 CKA_TOKEN, CKA_PRIVATE, CKA_MODIFIABLE and CKA_DESTROYABLE. To be more precise, 1267 these attributes are modifiable during the course of a C_CopyObject operation insofar as the Cryptoki 1268 specification is concerned. A particular token might not actually support modification of some such 1269 attributes during the course of a C_CopyObject operation. Furthermore, whether or not a particular 1270 attribute of an object on a particular token is modifiable during the course of a C_CopyObject operation 1271 might depend on the values of certain attributes of the object. For example, a secret key object’s 1272 CKA_SENSITIVE attribute can be changed from CK_FALSE to CK_TRUE during the course of a 1273 C_CopyObject operation, but not the other way around. 1274
If the CKA_COPYABLE attribute of the object to be copied is set to CK_FALSE, C_CopyObject returns 1275 CKR_ACTION_PROHIBITED. Otherwise, the scenarios described in 10.1.1 - and the error codes they 1276 return - apply to copying objects with C_CopyObject, except for the possibility of a template being 1277 incomplete. 1278
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 44 of 168
4.2 Common attributes 1279
Table 11, Common footnotes for object attribute tables 1280
1 MUST be specified when object is created with C_CreateObject.
2 MUST not be specified when object is created with C_CreateObject.
3 MUST be specified when object is generated with C_GenerateKey or C_GenerateKeyPair.
4 MUST not be specified when object is generated with C_GenerateKey or C_GenerateKeyPair.
5 MUST be specified when object is unwrapped with C_UnwrapKey.
6 MUST not be specified when object is unwrapped with C_UnwrapKey.
7 Cannot be revealed if object has its CKA_SENSITIVE attribute set to CK_TRUE or its CKA_EXTRACTABLE attribute set to CK_FALSE.
8 May be modified after object is created with a C_SetAttributeValue call, or in the process of copying object with a C_CopyObject call. However, it is possible that a particular token may not permit modification of the attribute during the course of a C_CopyObject call.
9 Default value is token-specific, and may depend on the values of other attributes.
10 Can only be set to CK_TRUE by the SO user.
11 Attribute cannot be changed once set to CK_TRUE. It becomes a read only attribute.
12 Attribute cannot be changed once set to CK_FALSE. It becomes a read only attribute.
1281
Table 12, Common Object Attributes 1282
Attribute Data Type Meaning
CKA_CLASS1 CK_OBJECT_CLASS Object class (type)
Refer to Table 11 for footnotes 1283
The above table defines the attributes common to all objects. 1284
4.3 Hardware Feature Objects 1285
4.3.1 Definitions 1286
This section defines the object class CKO_HW_FEATURE for type CK_OBJECT_CLASS as used in the 1287 CKA_CLASS attribute of objects. 1288
4.3.2 Overview 1289
Hardware feature objects (CKO_HW_FEATURE) represent features of the device. They provide an easily 1290 expandable method for introducing new value-based features to the Cryptoki interface. 1291
When searching for objects using C_FindObjectsInit and C_FindObjects, hardware feature objects are 1292 not returned unless the CKA_CLASS attribute in the template has the value CKO_HW_FEATURE. This 1293 protects applications written to previous versions of Cryptoki from finding objects that they do not 1294 understand. 1295
Table 13, Hardware Feature Common Attributes 1296
Attribute Data Type Meaning
CKA_HW_FEATURE_TYPE1 CK_HW_FEATURE_TYPE Hardware feature (type)
- Refer to Table 11 for footnotes 1297
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 45 of 168
4.3.3 Clock 1298
4.3.3.1 Definition 1299
The CKA_HW_FEATURE_TYPE attribute takes the value CKH_CLOCK of type 1300 CK_HW_FEATURE_TYPE. 1301
4.3.3.2 Description 1302
Clock objects represent real-time clocks that exist on the device. This represents the same clock source 1303 as the utcTime field in the CK_TOKEN_INFO structure. 1304
Table 14, Clock Object Attributes 1305
Attribute Data Type Meaning
CKA_VALUE CK_CHAR[16] Current time as a character-string of length 16, represented in the format YYYYMMDDhhmmssxx (4 characters for the year; 2 characters each for the month, the day, the hour, the minute, and the second; and 2 additional reserved ‘0’ characters).
The CKA_VALUE attribute may be set using the C_SetAttributeValue function if permitted by the 1306 device. The session used to set the time MUST be logged in. The device may require the SO to be the 1307 user logged in to modify the time value. C_SetAttributeValue will return the error 1308 CKR_USER_NOT_LOGGED_IN to indicate that a different user type is required to set the value. 1309
4.3.4 Monotonic Counter Objects 1310
4.3.4.1 Definition 1311
The CKA_HW_FEATURE_TYPE attribute takes the value CKH_MONOTONIC_COUNTER of type 1312 CK_HW_FEATURE_TYPE. 1313
4.3.4.2 Description 1314
Monotonic counter objects represent hardware counters that exist on the device. The counter is 1315 guaranteed to increase each time its value is read, but not necessarily by one. This might be used by an 1316 application for generating serial numbers to get some assurance of uniqueness per token. 1317
Table 15, Monotonic Counter Attributes 1318
Attribute Data Type Meaning
CKA_RESET_ON_INIT1 CK_BBOOL The value of the counter will reset to a previously returned value if the token is initialized using C_InitToken.
CKA_HAS_RESET1 CK_BBOOL The value of the counter has been reset at least once at some point in time.
CKA_VALUE1 Byte Array The current version of the monotonic counter. The value is returned in big endian order.
1Read Only 1319
The CKA_VALUE attribute may not be set by the client. 1320
4.3.5 User Interface Objects 1321
4.3.5.1 Definition 1322
The CKA_HW_FEATURE_TYPE attribute takes the value CKH_USER_INTERFACE of type 1323 CK_HW_FEATURE_TYPE. 1324
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 46 of 168
4.3.5.2 Description 1325
User interface objects represent the presentation capabilities of the device. 1326
Table 16, User Interface Object Attributes 1327
Attribute Data type Meaning
CKA_PIXEL_X CK_ULONG Screen resolution (in pixels) in X-axis (e.g. 1280)
CKA_PIXEL_Y CK_ULONG Screen resolution (in pixels) in Y-axis (e.g. 1024)
CKA_RESOLUTION CK_ULONG DPI, pixels per inch
CKA_CHAR_ROWS CK_ULONG For character-oriented displays; number of character rows (e.g. 24)
CKA_CHAR_COLUMNS CK_ULONG For character-oriented displays: number of character columns (e.g. 80). If display is of proportional-font type, this is the width of the display in “em”-s (letter “M”), see CC/PP Struct.
CKA_COLOR CK_BBOOL Color support
CKA_BITS_PER_PIXEL CK_ULONG The number of bits of color or grayscale information per pixel.
CKA_CHAR_SETS RFC 2279 string
String indicating supported character sets, as defined by IANA MIBenum sets (www.iana.org). Supported character sets are separated with “;”. E.g. a token supporting iso-8859-1 and US-ASCII would set the attribute value to “4;3”.
CKA_ENCODING_METHODS RFC 2279 string
String indicating supported content transfer encoding methods, as defined by IANA (www.iana.org). Supported methods are separated with “;”. E.g. a token supporting 7bit, 8bit and base64 could set the attribute value to “7bit;8bit;base64”.
CKA_MIME_TYPES RFC 2279 string
String indicating supported (presentable) MIME-types, as defined by IANA (www.iana.org). Supported types are separated with “;”. E.g. a token supporting MIME types "a/b", "a/c" and "a/d" would set the attribute value to “a/b;a/c;a/d”.
The selection of attributes, and associated data types, has been done in an attempt to stay as aligned 1328 with RFC 2534 and CC/PP Struct as possible. The special value CK_UNAVAILABLE_INFORMATION 1329 may be used for CK_ULONG-based attributes when information is not available or applicable. 1330
None of the attribute values may be set by an application. 1331
The value of the CKA_ENCODING_METHODS attribute may be used when the application needs to 1332 send MIME objects with encoded content to the token. 1333
4.4 Storage Objects 1334
This is not an object class; hence no CKO_ definition is required. It is a category of object classes with 1335 common attributes for the object classes that follow. 1336
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 47 of 168
Table 17, Common Storage Object Attributes 1337
Attribute Data Type Meaning
CKA_TOKEN CK_BBOOL CK_TRUE if object is a token object; CK_FALSE if object is a session object. Default is CK_FALSE.
CKA_PRIVATE CK_BBOOL CK_TRUE if object is a private object; CK_FALSE if object is a public object. Default value is token-specific, and may depend on the values of other attributes of the object.
CKA_MODIFIABLE CK_BBOOL CK_TRUE if object can be modified Default is CK_TRUE.
CKA_LABEL RFC2279 string Description of the object (default empty).
CKA_COPYABLE CK_BBOOL CK_TRUE if object can be copied using C_CopyObject. Defaults to CK_TRUE. Can’t be set to TRUE once it is set to FALSE.
CKA_DESTROYABLE CK_BBOOL CK_TRUE if the object can be destroyed using C_DestroyObject. Default is CK_TRUE.
CKA_UNIQUE_ID246 RFC2279 string The unique identifier assigned to the object.
Only the CKA_LABEL attribute can be modified after the object is created. (The CKA_TOKEN, 1338 CKA_PRIVATE, and CKA_MODIFIABLE attributes can be changed in the process of copying an object, 1339 however.) 1340
The CKA_TOKEN attribute identifies whether the object is a token object or a session object. 1341
When the CKA_PRIVATE attribute is CK_TRUE, a user may not access the object until the user has 1342 been authenticated to the token. 1343
The value of the CKA_MODIFIABLE attribute determines whether or not an object is read-only. 1344
The CKA_LABEL attribute is intended to assist users in browsing. 1345
The value of the CKA_COPYABLE attribute determines whether or not an object can be copied. This 1346 attribute can be used in conjunction with CKA_MODIFIABLE to prevent changes to the permitted usages 1347 of keys and other objects. 1348
The value of the CKA_DESTROYABLE attribute determines whether the object can be destroyed using 1349 C_DestroyObject. 1350
4.4.1 The CKA_UNIQUE_ID attribute 1351
Any time a new object is created, a value for CKA_UNIQUE_ID MUST be generated by the token and 1352 stored with the object. The specific algorithm used to generate unique ID values for objects is token-1353 specific, but values generated MUST be unique across all objects visible to any particular session, and 1354 SHOULD be unique across all objects created by the token. Reinitializing the token, such as by calling 1355 C_InitToken, MAY cause reuse of CKA_UNIQUE_ID values. 1356
Any attempt to modify the CKA_UNIQUE_ID attribute of an existing object or to specify the value of the 1357 CKA_UNIQUE_ID attribute in the template for an operation that creates one or more objects MUST fail. 1358 Operations failing for this reason return the error code CKR_ATTRIBUTE_READ_ONLY. 1359
1360
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 48 of 168
4.5 Data objects 1361
4.5.1 Definitions 1362
This section defines the object class CKO_DATA for type CK_OBJECT_CLASS as used in the 1363 CKA_CLASS attribute of objects. 1364
4.5.2 Overview 1365
Data objects (object class CKO_DATA) hold information defined by an application. Other than providing 1366 access to it, Cryptoki does not attach any special meaning to a data object. The following table lists the 1367 attributes supported by data objects, in addition to the common attributes defined for this object class: 1368
Table 18, Data Object Attributes 1369
Attribute Data type Meaning
CKA_APPLICATION RFC2279 string
Description of the application that manages the object (default empty)
CKA_OBJECT_ID Byte Array DER-encoding of the object identifier indicating the data object type (default empty)
CKA_VALUE Byte array Value of the object (default empty)
The CKA_APPLICATION attribute provides a means for applications to indicate ownership of the data 1370 objects they manage. Cryptoki does not provide a means of ensuring that only a particular application has 1371 access to a data object, however. 1372
The CKA_OBJECT_ID attribute provides an application independent and expandable way to indicate the 1373 type of the data object value. Cryptoki does not provide a means of insuring that the data object identifier 1374 matches the data value. 1375
The following is a sample template containing attributes for creating a data object: 1376
CK_OBJECT_CLASS class = CKO_DATA; 1377 CK_UTF8CHAR label[] = “A data object”; 1378 CK_UTF8CHAR application[] = “An application”; 1379 CK_BYTE data[] = “Sample data”; 1380 CK_BBOOL true = CK_TRUE; 1381 CK_ATTRIBUTE template[] = { 1382 {CKA_CLASS, &class, sizeof(class)}, 1383 {CKA_TOKEN, &true, sizeof(true)}, 1384 {CKA_LABEL, label, sizeof(label)-1}, 1385 {CKA_APPLICATION, application, sizeof(application)-1}, 1386 {CKA_VALUE, data, sizeof(data)} 1387 }; 1388
1389
4.6 Certificate objects 1390
4.6.1 Definitions 1391
This section defines the object class CKO_CERTIFICATE for type CK_OBJECT_CLASS as used in the 1392 CKA_CLASS attribute of objects. 1393
4.6.2 Overview 1394
Certificate objects (object class CKO_CERTIFICATE) hold public-key or attribute certificates. Other than 1395 providing access to certificate objects, Cryptoki does not attach any special meaning to certificates. The 1396 following table defines the common certificate object attributes, in addition to the common attributes 1397 defined for this object class: 1398
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 49 of 168
Table 19, Common Certificate Object Attributes 1399
Attribute Data type Meaning
CKA_CERTIFICATE_TYPE1 CK_CERTIFICATE_TYPE Type of certificate
CKA_TRUSTED10 CK_BBOOL The certificate can be trusted for the application that it was created.
CKA_CERTIFICATE_CATEGORY CKA_CERTIFICATE_CATEGORY (default CK_CERTIFICATE_CATEGORY_UNSPECIFIED)
CKA_CHECK_VALUE Byte array Checksum
CKA_START_DATE CK_DATE Start date for the certificate (default empty)
CKA_END_DATE CK_DATE End date for the certificate (default empty)
CKA_PUBLIC_KEY_INFO Byte Array DER-encoding of the SubjectPublicKeyInfo for the public key contained in this certificate (default empty)
- Refer to Table 11 for footnotes 1400
Cryptoki does not enforce the relationship of the CKA_PUBLIC_KEY_INFO to the public key in the 1401 certificate, but does recommend that the key be extracted from the certificate to create this value. 1402
The CKA_CERTIFICATE_TYPE attribute may not be modified after an object is created. This version of 1403 Cryptoki supports the following certificate types: 1404
• X.509 public key certificate 1405
• WTLS public key certificate 1406
• X.509 attribute certificate 1407
The CKA_TRUSTED attribute cannot be set to CK_TRUE by an application. It MUST be set by a token 1408 initialization application or by the token’s SO. Trusted certificates cannot be modified. 1409
The CKA_CERTIFICATE_CATEGORY attribute is used to indicate if a stored certificate is a user 1410 certificate for which the corresponding private key is available on the token (“token user”), a CA certificate 1411 (“authority”), or another end-entity certificate (“other entity”). This attribute may not be modified after an 1412 object is created. 1413
The CKA_CERTIFICATE_CATEGORY and CKA_TRUSTED attributes will together be used to map to 1414 the categorization of the certificates. 1415
CKA_CHECK_VALUE: The value of this attribute is derived from the certificate by taking the first three 1416 bytes of the SHA-1 hash of the certificate object’s CKA_VALUE attribute. 1417
The CKA_START_DATE and CKA_END_DATE attributes are for reference only; Cryptoki does not 1418 attach any special meaning to them. When present, the application is responsible to set them to values 1419 that match the certificate’s encoded “not before” and “not after” fields (if any). 1420
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 50 of 168
4.6.3 X.509 public key certificate objects 1421
X.509 certificate objects (certificate type CKC_X_509) hold X.509 public key certificates. The following 1422 table defines the X.509 certificate object attributes, in addition to the common attributes defined for this 1423 object class: 1424
Table 20, X.509 Certificate Object Attributes 1425
Attribute Data type Meaning
CKA_SUBJECT1 Byte array DER-encoding of the certificate subject name
CKA_ID Byte array Key identifier for public/private key pair (default empty)
CKA_ISSUER Byte array DER-encoding of the certificate issuer name (default empty)
CKA_SERIAL_NUMBER Byte array DER-encoding of the certificate serial number (default empty)
CKA_VALUE2 Byte array BER-encoding of the certificate
CKA_URL3 RFC2279 string
If not empty this attribute gives the URL where the complete certificate can be obtained (default empty)
CKA_HASH_OF_SUBJECT_PUBLIC_KEY4
Byte array Hash of the subject public key (default empty). Hash algorithm is defined by CKA_NAME_HASH_ALGORITHM
CKA_HASH_OF_ISSUER_PUBLIC_KEY4
Byte array Hash of the issuer public key (default empty). Hash algorithm is defined by CKA_NAME_HASH_ALGORITHM
CKA_JAVA_MIDP_SECURITY_DOMAIN
CK_JAVA_MIDP_SECURITY_DOMAIN
Java MIDP security domain. (default CK_SECURITY_DOMAIN_UNSPECIFIED)
CKA_NAME_HASH_ALGORITHM
CK_MECHANISM_TYPE
Defines the mechanism used to calculate CKA_HASH_OF_SUBJECT_PUBLIC_KEY and CKA_HASH_OF_ISSUER_PUBLIC_KEY. If the attribute is not present then the type defaults to SHA-1.
1MUST be specified when the object is created. 1426 2MUST be specified when the object is created. MUST be non-empty if CKA_URL is empty. 1427
3MUST be non-empty if CKA_VALUE is empty. 1428
4Can only be empty if CKA_URL is empty. 1429
Only the CKA_ID, CKA_ISSUER, and CKA_SERIAL_NUMBER attributes may be modified after the 1430 object is created. 1431
The CKA_ID attribute is intended as a means of distinguishing multiple public-key/private-key pairs held 1432 by the same subject (whether stored in the same token or not). (Since the keys are distinguished by 1433 subject name as well as identifier, it is possible that keys for different subjects may have the same 1434 CKA_ID value without introducing any ambiguity.) 1435
It is intended in the interests of interoperability that the subject name and key identifier for a certificate will 1436 be the same as those for the corresponding public and private keys (though it is not required that all be 1437
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 51 of 168
stored in the same token). However, Cryptoki does not enforce this association, or even the uniqueness 1438 of the key identifier for a given subject; in particular, an application may leave the key identifier empty. 1439
The CKA_ISSUER and CKA_SERIAL_NUMBER attributes are for compatibility with PKCS #7 and 1440 Privacy Enhanced Mail (RFC1421). Note that with the version 3 extensions to X.509 certificates, the key 1441 identifier may be carried in the certificate. It is intended that the CKA_ID value be identical to the key 1442 identifier in such a certificate extension, although this will not be enforced by Cryptoki. 1443
The CKA_URL attribute enables the support for storage of the URL where the certificate can be found 1444 instead of the certificate itself. Storage of a URL instead of the complete certificate is often used in mobile 1445 environments. 1446
The CKA_HASH_OF_SUBJECT_PUBLIC_KEY and CKA_HASH_OF_ISSUER_PUBLIC_KEY 1447 attributes are used to store the hashes of the public keys of the subject and the issuer. They are 1448 particularly important when only the URL is available to be able to correlate a certificate with a private key 1449 and when searching for the certificate of the issuer. The hash algorithm is defined by 1450 CKA_NAME_HASH_ALGORITHM. 1451
The CKA_JAVA_MIDP_SECURITY_DOMAIN attribute associates a certificate with a Java MIDP security 1452 domain. 1453
The following is a sample template for creating an X.509 certificate object: 1454
CK_OBJECT_CLASS class = CKO_CERTIFICATE; 1455 CK_CERTIFICATE_TYPE certType = CKC_X_509; 1456 CK_UTF8CHAR label[] = “A certificate object”; 1457 CK_BYTE subject[] = {...}; 1458 CK_BYTE id[] = {123}; 1459 CK_BYTE certificate[] = {...}; 1460 CK_BBOOL true = CK_TRUE; 1461 CK_ATTRIBUTE template[] = { 1462 {CKA_CLASS, &class, sizeof(class)}, 1463 {CKA_CERTIFICATE_TYPE, &certType, sizeof(certType)}; 1464 {CKA_TOKEN, &true, sizeof(true)}, 1465 {CKA_LABEL, label, sizeof(label)-1}, 1466 {CKA_SUBJECT, subject, sizeof(subject)}, 1467 {CKA_ID, id, sizeof(id)}, 1468 {CKA_VALUE, certificate, sizeof(certificate)} 1469 }; 1470
4.6.4 WTLS public key certificate objects 1471
WTLS certificate objects (certificate type CKC_WTLS) hold WTLS public key certificates. The following 1472 table defines the WTLS certificate object attributes, in addition to the common attributes defined for this 1473 object class. 1474
Table 21: WTLS Certificate Object Attributes 1475
Attribute Data type Meaning
CKA_SUBJECT1 Byte array WTLS-encoding (Identifier type) of the certificate subject
CKA_ISSUER Byte array WTLS-encoding (Identifier type) of the certificate issuer (default empty)
CKA_VALUE2 Byte array WTLS-encoding of the certificate
CKA_URL3 RFC2279 string
If not empty this attribute gives the URL where the complete certificate can be obtained
CKA_HASH_OF_SUBJECT_PUBLIC_KEY4
Byte array SHA-1 hash of the subject public key (default empty). Hash algorithm is defined by CKA_NAME_HASH_ALGORITHM
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 52 of 168
Attribute Data type Meaning
CKA_HASH_OF_ISSUER_PUBLIC_KEY4
Byte array SHA-1 hash of the issuer public key (default empty). Hash algorithm is defined by CKA_NAME_HASH_ALGORITHM
CKA_NAME_HASH_ALGORITHM
CK_MECHANISM_TYPE
Defines the mechanism used to calculate CKA_HASH_OF_SUBJECT_PUBLIC_KEY and CKA_HASH_OF_ISSUER_PUBLIC_KEY. If the attribute is not present then the type defaults to SHA-1.
1MUST be specified when the object is created. Can only be empty if CKA_VALUE is empty. 1476
2MUST be specified when the object is created. MUST be non-empty if CKA_URL is empty. 1477
3MUST be non-empty if CKA_VALUE is empty. 1478
4Can only be empty if CKA_URL is empty. 1479
1480
Only the CKA_ISSUER attribute may be modified after the object has been created. 1481
The encoding for the CKA_SUBJECT, CKA_ISSUER, and CKA_VALUE attributes can be found in 1482 [WTLS]. 1483
The CKA_URL attribute enables the support for storage of the URL where the certificate can be found 1484 instead of the certificate itself. Storage of a URL instead of the complete certificate is often used in mobile 1485 environments. 1486
The CKA_HASH_OF_SUBJECT_PUBLIC_KEY and CKA_HASH_OF_ISSUER_PUBLIC_KEY 1487 attributes are used to store the hashes of the public keys of the subject and the issuer. They are 1488 particularly important when only the URL is available to be able to correlate a certificate with a private key 1489 and when searching for the certificate of the issuer. The hash algorithm is defined by 1490 CKA_NAME_HASH_ALGORITHM. 1491
The following is a sample template for creating a WTLS certificate object: 1492
CK_OBJECT_CLASS class = CKO_CERTIFICATE; 1493 CK_CERTIFICATE_TYPE certType = CKC_WTLS; 1494 CK_UTF8CHAR label[] = “A certificate object”; 1495 CK_BYTE subject[] = {...}; 1496 CK_BYTE certificate[] = {...}; 1497 CK_BBOOL true = CK_TRUE; 1498 CK_ATTRIBUTE template[] = 1499 { 1500 {CKA_CLASS, &class, sizeof(class)}, 1501 {CKA_CERTIFICATE_TYPE, &certType, sizeof(certType)}; 1502 {CKA_TOKEN, &true, sizeof(true)}, 1503 {CKA_LABEL, label, sizeof(label)-1}, 1504 {CKA_SUBJECT, subject, sizeof(subject)}, 1505 {CKA_VALUE, certificate, sizeof(certificate)} 1506 }; 1507
4.6.5 X.509 attribute certificate objects 1508
X.509 attribute certificate objects (certificate type CKC_X_509_ATTR_CERT) hold X.509 attribute 1509 certificates. The following table defines the X.509 attribute certificate object attributes, in addition to the 1510 common attributes defined for this object class: 1511
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 53 of 168
Table 22, X.509 Attribute Certificate Object Attributes 1512
Attribute Data Type Meaning
CKA_OWNER1 Byte Array DER-encoding of the attribute certificate's subject field. This is distinct from the CKA_SUBJECT attribute contained in CKC_X_509 certificates because the ASN.1 syntax and encoding are different.
CKA_AC_ISSUER Byte Array DER-encoding of the attribute certificate's issuer field. This is distinct from the CKA_ISSUER attribute contained in CKC_X_509 certificates because the ASN.1 syntax and encoding are different. (default empty)
CKA_SERIAL_NUMBER Byte Array DER-encoding of the certificate serial number. (default empty)
CKA_ATTR_TYPES Byte Array BER-encoding of a sequence of object identifier values corresponding to the attribute types contained in the certificate. When present, this field offers an opportunity for applications to search for a particular attribute certificate without fetching and parsing the certificate itself. (default empty)
CKA_VALUE1 Byte Array BER-encoding of the certificate.
1MUST be specified when the object is created 1513
Only the CKA_AC_ISSUER, CKA_SERIAL_NUMBER and CKA_ATTR_TYPES attributes may be 1514 modified after the object is created. 1515
The following is a sample template for creating an X.509 attribute certificate object: 1516
CK_OBJECT_CLASS class = CKO_CERTIFICATE; 1517 CK_CERTIFICATE_TYPE certType = CKC_X_509_ATTR_CERT; 1518 CK_UTF8CHAR label[] = "An attribute certificate object"; 1519 CK_BYTE owner[] = {...}; 1520 CK_BYTE certificate[] = {...}; 1521 CK_BBOOL true = CK_TRUE; 1522 CK_ATTRIBUTE template[] = { 1523 {CKA_CLASS, &class, sizeof(class)}, 1524 {CKA_CERTIFICATE_TYPE, &certType, sizeof(certType)}; 1525 {CKA_TOKEN, &true, sizeof(true)}, 1526 {CKA_LABEL, label, sizeof(label)-1}, 1527 {CKA_OWNER, owner, sizeof(owner)}, 1528 {CKA_VALUE, certificate, sizeof(certificate)} 1529 }; 1530
4.7 Key objects 1531
4.7.1 Definitions 1532
There is no CKO_ definition for the base key object class, only for the key types derived from it. 1533
This section defines the object class CKO_PUBLIC_KEY, CKO_PRIVATE_KEY and 1534 CKO_SECRET_KEY for type CK_OBJECT_CLASS as used in the CKA_CLASS attribute of objects. 1535
4.7.2 Overview 1536
Key objects hold encryption or authentication keys, which can be public keys, private keys, or secret 1537 keys. The following common footnotes apply to all the tables describing attributes of keys: 1538
The following table defines the attributes common to public key, private key and secret key classes, in 1539 addition to the common attributes defined for this object class: 1540
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 54 of 168
Table 23, Common Key Attributes 1541
Attribute Data Type Meaning
CKA_KEY_TYPE1,5 CK_KEY_TYPE Type of key
CKA_ID8 Byte array Key identifier for key (default empty)
CKA_START_DATE8 CK_DATE Start date for the key (default empty)
CKA_END_DATE8 CK_DATE End date for the key (default empty)
CKA_DERIVE8 CK_BBOOL CK_TRUE if key supports key derivation (i.e., if other keys can be derived from this one (default CK_FALSE)
CKA_LOCAL2,4,6 CK_BBOOL CK_TRUE only if key was either
• generated locally (i.e., on the token) with a C_GenerateKey or C_GenerateKeyPair call
• created with a C_CopyObject call as a copy of a key which had its CKA_LOCAL attribute set to CK_TRUE
CKA_KEY_GEN_ MECHANISM2,4,6
CK_MECHANISM_TYPE
Identifier of the mechanism used to generate the key material.
CKA_ALLOWED_MECHANISMS
CK_MECHANISM_TYPE _PTR, pointer to a CK_MECHANISM_TYPE array
A list of mechanisms allowed to be used with this key. The number of mechanisms in the array is the ulValueLen component of the attribute divided by the size
of CK_MECHANISM_TYPE.
- Refer to Table 11 for footnotes 1542
The CKA_ID field is intended to distinguish among multiple keys. In the case of public and private keys, 1543 this field assists in handling multiple keys held by the same subject; the key identifier for a public key and 1544 its corresponding private key should be the same. The key identifier should also be the same as for the 1545 corresponding certificate, if one exists. Cryptoki does not enforce these associations, however. (See 1546 Section 0 for further commentary.) 1547
In the case of secret keys, the meaning of the CKA_ID attribute is up to the application. 1548
Note that the CKA_START_DATE and CKA_END_DATE attributes are for reference only; Cryptoki does 1549 not attach any special meaning to them. In particular, it does not restrict usage of a key according to the 1550 dates; doing this is up to the application. 1551
The CKA_DERIVE attribute has the value CK_TRUE if and only if it is possible to derive other keys from 1552 the key. 1553
The CKA_LOCAL attribute has the value CK_TRUE if and only if the value of the key was originally 1554 generated on the token by a C_GenerateKey or C_GenerateKeyPair call. 1555
The CKA_KEY_GEN_MECHANISM attribute identifies the key generation mechanism used to generate 1556 the key material. It contains a valid value only if the CKA_LOCAL attribute has the value CK_TRUE. If 1557 CKA_LOCAL has the value CK_FALSE, the value of the attribute is 1558 CK_UNAVAILABLE_INFORMATION. 1559
4.8 Public key objects 1560
Public key objects (object class CKO_PUBLIC_KEY) hold public keys. The following table defines the 1561 attributes common to all public keys, in addition to the common attributes defined for this object class: 1562
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 55 of 168
Table 24, Common Public Key Attributes 1563
Attribute Data type Meaning
CKA_SUBJECT8 Byte array DER-encoding of the key subject name (default empty)
CKA_ENCRYPT8 CK_BBOOL CK_TRUE if key supports encryption9
CKA_VERIFY8 CK_BBOOL CK_TRUE if key supports verification where the signature is an appendix to the data9
CKA_VERIFY_RECOVER8 CK_BBOOL CK_TRUE if key supports verification where the data is recovered from the signature9
CKA_WRAP8 CK_BBOOL CK_TRUE if key supports wrapping (i.e., can be used to wrap other keys)9
CKA_TRUSTED10 CK_BBOOL The key can be trusted for the application that it was created.
The wrapping key can be used to wrap keys with CKA_WRAP_WITH_TRUSTED set to CK_TRUE.
CKA_WRAP_TEMPLATE CK_ATTRIBUTE_PTR For wrapping keys. The attribute template to match against any keys wrapped using this wrapping key. Keys that do not match cannot be wrapped. The number of attributes in the array is the ulValueLen component of the attribute divided by the size of CK_ATTRIBUTE.
CKA_PUBLIC_KEY_INFO Byte array DER-encoding of the SubjectPublicKeyInfo for this public key. (MAY be empty, DEFAULT derived from the underlying public key data)
- Refer to Table 11 for footnotes 1564
It is intended in the interests of interoperability that the subject name and key identifier for a public key will 1565 be the same as those for the corresponding certificate and private key. However, Cryptoki does not 1566 enforce this, and it is not required that the certificate and private key also be stored on the token. 1567
To map between ISO/IEC 9594-8 (X.509) keyUsage flags for public keys and the PKCS #11 attributes for 1568 public keys, use the following table. 1569
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 56 of 168
Table 25, Mapping of X.509 key usage flags to Cryptoki attributes for public keys 1570
Key usage flags for public keys in X.509 public key certificates
Corresponding cryptoki attributes for public keys.
dataEncipherment CKA_ENCRYPT
digitalSignature, keyCertSign, cRLSign CKA_VERIFY
digitalSignature, keyCertSign, cRLSign CKA_VERIFY_RECOVER
keyAgreement CKA_DERIVE
keyEncipherment CKA_WRAP
nonRepudiation CKA_VERIFY
nonRepudiation CKA_VERIFY_RECOVER
The value of the CKA_PUBLIC_KEY_INFO attribute is the DER encoded value of SubjectPublicKeyInfo: 1571
SubjectPublicKeyInfo ::= SEQUENCE { 1572
algorithm AlgorithmIdentifier, 1573
subjectPublicKey BIT_STRING } 1574
The encodings for the subjectPublicKey field are specified in the description of the public key types in the 1575 appropriate [PKCS11-Curr] document for the key types defined within this specification. 1576
4.9 Private key objects 1577
Private key objects (object class CKO_PRIVATE_KEY) hold private keys. The following table defines the 1578 attributes common to all private keys, in addition to the common attributes defined for this object class: 1579
Table 26, Common Private Key Attributes 1580
Attribute Data type Meaning
CKA_SUBJECT8 Byte array DER-encoding of certificate subject name (default empty)
CKA_SENSITIVE8,11 CK_BBOOL CK_TRUE if key is sensitive9
CKA_DECRYPT8 CK_BBOOL CK_TRUE if key supports decryption9
CKA_SIGN8 CK_BBOOL CK_TRUE if key supports signatures where the signature is an appendix to the data9
CKA_SIGN_RECOVER8 CK_BBOOL CK_TRUE if key supports signatures where the data can be recovered from the signature9
CKA_UNWRAP8 CK_BBOOL CK_TRUE if key supports unwrapping (i.e., can be used to unwrap other keys)9
CKA_EXTRACTABLE8,12 CK_BBOOL CK_TRUE if key is extractable and can be wrapped 9
CKA_ALWAYS_SENSITIVE2,4,6 CK_BBOOL CK_TRUE if key has always had the CKA_SENSITIVE attribute set to CK_TRUE
CKA_NEVER_EXTRACTABLE2,4,6 CK_BBOOL CK_TRUE if key has never had the CKA_EXTRACTABLE attribute set to CK_TRUE
CKA_WRAP_WITH_TRUSTED11 CK_BBOOL CK_TRUE if the key can only be wrapped with a wrapping key that has CKA_TRUSTED set to CK_TRUE.
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 57 of 168
Attribute Data type Meaning
Default is CK_FALSE.
CKA_UNWRAP_TEMPLATE CK_ATTRIBUTE_PTR For wrapping keys. The attribute template to apply to any keys unwrapped using this wrapping key. Any user supplied template is applied after this template as if the object has already been created. The number of attributes in the array is the ulValueLen component of the attribute divided by the size of
CK_ATTRIBUTE.
CKA_ALWAYS_AUTHENTICATE CK_BBOOL If CK_TRUE, the user has to supply the PIN for each use (sign or decrypt) with the key. Default is CK_FALSE.
CKA_PUBLIC_KEY_INFO8 Byte Array DER-encoding of the SubjectPublicKeyInfo for the associated public key (MAY be empty; DEFAULT derived from the underlying private key data; MAY be manually set for specific key types; if set; MUST be consistent with the underlying private key data)
- Refer to Table 11 for footnotes 1581
It is intended in the interests of interoperability that the subject name and key identifier for a private key 1582 will be the same as those for the corresponding certificate and public key. However, this is not enforced 1583 by Cryptoki, and it is not required that the certificate and public key also be stored on the token. 1584
If the CKA_SENSITIVE attribute is CK_TRUE, or if the CKA_EXTRACTABLE attribute is CK_FALSE, 1585 then certain attributes of the private key cannot be revealed in plaintext outside the token. Which 1586 attributes these are is specified for each type of private key in the attribute table in the section describing 1587 that type of key. 1588
The CKA_ALWAYS_AUTHENTICATE attribute can be used to force re-authentication (i.e. force the user 1589 to provide a PIN) for each use of a private key. “Use” in this case means a cryptographic operation such 1590 as sign or decrypt. This attribute may only be set to CK_TRUE when CKA_PRIVATE is also CK_TRUE. 1591
Re-authentication occurs by calling C_Login with userType set to CKU_CONTEXT_SPECIFIC 1592 immediately after a cryptographic operation using the key has been initiated (e.g. after C_SignInit). In 1593 this call, the actual user type is implicitly given by the usage requirements of the active key. If C_Login 1594 returns CKR_OK the user was successfully authenticated and this sets the active key in an authenticated 1595 state that lasts until the cryptographic operation has successfully or unsuccessfully been completed (e.g. 1596 by C_Sign, C_SignFinal,..). A return value CKR_PIN_INCORRECT from C_Login means that the user 1597 was denied permission to use the key and continuing the cryptographic operation will result in a behavior 1598 as if C_Login had not been called. In both of these cases the session state will remain the same, 1599 however repeated failed re-authentication attempts may cause the PIN to be locked. C_Login returns in 1600 this case CKR_PIN_LOCKED and this also logs the user out from the token. Failing or omitting to re-1601 authenticate when CKA_ALWAYS_AUTHENTICATE is set to CK_TRUE will result in 1602 CKR_USER_NOT_LOGGED_IN to be returned from calls using the key. C_Login will return 1603 CKR_OPERATION_NOT_INITIALIZED, but the active cryptographic operation will not be affected, if an 1604 attempt is made to re-authenticate when CKA_ALWAYS_AUTHENTICATE is set to CK_FALSE. 1605
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 58 of 168
The CKA_PUBLIC_KEY_INFO attribute represents the public key associated with this private key. The 1606 data it represents may either be stored as part of the private key data, or regenerated as needed from the 1607 private key. 1608
If this attribute is supplied as part of a template for C_CreateObject, C_CopyObject or 1609 C_SetAttributeValue for a private key, the token MUST verify correspondence between the private key 1610 data and the public key data as supplied in CKA_PUBLIC_KEY_INFO. This can be done either by 1611 deriving a public key from the private key and comparing the values, or by doing a sign and verify 1612 operation. If there is a mismatch, the command SHALL return CKR_ATTRIBUTE_VALUE_INVALID. A 1613 token MAY choose not to support the CKA_PUBLIC_KEY_INFO attribute for commands which create 1614 new private keys. If it does not support the attribute, the command SHALL return 1615 CKR_ATTRIBUTE_TYPE_INVALID. 1616
As a general guideline, private keys of any type SHOULD store sufficient information to retrieve the public 1617 key information. In particular, the RSA private key description has been modified in <this version> to add 1618 the CKA_PUBLIC_EXPONENT to the list of attributes required for an RSA private key. All other private 1619 key types described in this specification contain sufficient information to recover the associated public 1620 key. 1621
4.9.1 RSA private key objects 1622
RSA private key objects (object class CKO_PRIVATE_KEY, key type CKK_RSA) hold RSA private keys. 1623 The following table defines the RSA private key object attributes, in addition to the common attributes 1624 defined for this object class: 1625
Table 27, RSA Private Key Object Attributes 1626
Attribute Data type Meaning
CKA_MODULUS1,4,6 Big integer Modulus n
CKA_PUBLIC_EXPONENT1,4,6 Big integer Public exponent e
CKA_PRIVATE_EXPONENT1,4,6,7 Big integer Private exponent d
CKA_PRIME_14,6,7 Big integer Prime p
CKA_PRIME_24,6,7 Big integer Prime q
CKA_EXPONENT_14,6,7 Big integer Private exponent d modulo p-1
CKA_EXPONENT_24,6,7 Big integer Private exponent d modulo q-1
CKA_COEFFICIENT4,6,7 Big integer CRT coefficient q-1 mod p
Refer to Table 11 for footnotes 1627
Depending on the token, there may be limits on the length of the key components. See PKCS #1 for 1628 more information on RSA keys. 1629
Tokens vary in what they actually store for RSA private keys. Some tokens store all of the above 1630 attributes, which can assist in performing rapid RSA computations. Other tokens might store only the 1631 CKA_MODULUS and CKA_PRIVATE_EXPONENT values. Effective with version 2.40, tokens MUST 1632 also store CKA_PUBLIC_EXPONENT. This permits the retrieval of sufficient data to reconstitute the 1633 associated public key. 1634
Because of this, Cryptoki is flexible in dealing with RSA private key objects. When a token generates an 1635 RSA private key, it stores whichever of the fields in Table 27 it keeps track of. Later, if an application 1636 asks for the values of the key’s various attributes, Cryptoki supplies values only for attributes whose 1637 values it can obtain (i.e., if Cryptoki is asked for the value of an attribute it cannot obtain, the request 1638 fails). Note that a Cryptoki implementation may or may not be able and/or willing to supply various 1639 attributes of RSA private keys which are not actually stored on the token. E.g., if a particular token stores 1640 values only for the CKA_PRIVATE_EXPONENT, CKA_PUBLIC_EXPONENT, CKA_PRIME_1, and 1641 CKA_PRIME_2 attributes, then Cryptoki is certainly able to report values for all the attributes above 1642 (since they can all be computed efficiently from these four values). However, a Cryptoki implementation 1643 may or may not actually do this extra computation. The only attributes from Table 27 for which a Cryptoki 1644
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 59 of 168
implementation is required to be able to return values are CKA_MODULUS, 1645 CKA_PRIVATE_EXPONENT, and CKA_PUBLIC_EXPONENT. A token SHOULD also be able to return 1646 CKA_PUBLIC_KEY_INFO for an RSA private key. See the general guidance for Private Keys above. 1647
4.10 Secret key objects 1648
Secret key objects (object class CKO_SECRET_KEY) hold secret keys. The following table defines the 1649 attributes common to all secret keys, in addition to the common attributes defined for this object class: 1650
Table 28, Common Secret Key Attributes 1651
Attribute Data type Meaning
CKA_SENSITIVE8,11 CK_BBOOL CK_TRUE if object is sensitive (default CK_FALSE)
CKA_ENCRYPT8 CK_BBOOL CK_TRUE if key supports encryption9
CKA_DECRYPT8 CK_BBOOL CK_TRUE if key supports decryption9
CKA_SIGN8 CK_BBOOL CK_TRUE if key supports signatures (i.e., authentication codes) where the signature is an appendix to the data9
CKA_VERIFY8 CK_BBOOL CK_TRUE if key supports verification (i.e., of authentication codes) where the signature is an appendix to the data9
CKA_WRAP8 CK_BBOOL CK_TRUE if key supports wrapping (i.e., can be used to wrap other keys)9
CKA_UNWRAP8 CK_BBOOL CK_TRUE if key supports unwrapping (i.e., can be used to unwrap other keys)9
CKA_EXTRACTABLE8,12 CK_BBOOL CK_TRUE if key is extractable and can be wrapped 9
CKA_ALWAYS_SENSITIVE2,4,6 CK_BBOOL CK_TRUE if key has always had the CKA_SENSITIVE attribute set to CK_TRUE
CKA_NEVER_EXTRACTABLE2,4,6 CK_BBOOL CK_TRUE if key has never had the CKA_EXTRACTABLE attribute set to CK_TRUE
CKA_CHECK_VALUE Byte array Key checksum
CKA_WRAP_WITH_TRUSTED11 CK_BBOOL CK_TRUE if the key can only be wrapped with a wrapping key that has CKA_TRUSTED set to CK_TRUE.
Default is CK_FALSE.
CKA_TRUSTED10 CK_BBOOL The wrapping key can be used to wrap keys with CKA_WRAP_WITH_TRUSTED set to CK_TRUE.
CKA_WRAP_TEMPLATE CK_ATTRIBUTE_PTR For wrapping keys. The attribute template to match against any keys wrapped using this wrapping key. Keys that do not
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 60 of 168
Attribute Data type Meaning
match cannot be wrapped. The number of attributes in the array is the
ulValueLen component of the attribute divided by the size of
CK_ATTRIBUTE
CKA_UNWRAP_TEMPLATE CK_ATTRIBUTE_PTR For wrapping keys. The attribute template to apply to any keys unwrapped using this wrapping key. Any user supplied template is applied after this template as if the object has already been created. The number of attributes in the array is the ulValueLen component of the attribute divided by the size of
CK_ATTRIBUTE.
- Refer to Table 11 for footnotes 1652
If the CKA_SENSITIVE attribute is CK_TRUE, or if the CKA_EXTRACTABLE attribute is CK_FALSE, 1653 then certain attributes of the secret key cannot be revealed in plaintext outside the token. Which 1654 attributes these are is specified for each type of secret key in the attribute table in the section describing 1655 that type of key. 1656
The key check value (KCV) attribute for symmetric key objects to be called CKA_CHECK_VALUE, of 1657 type byte array, length 3 bytes, operates like a fingerprint, or checksum of the key. They are intended to 1658 be used to cross-check symmetric keys against other systems where the same key is shared, and as a 1659 validity check after manual key entry or restore from backup. Refer to object definitions of specific key 1660 types for KCV algorithms. 1661
Properties: 1662
1. For two keys that are cryptographically identical the value of this attribute should be identical. 1663
2. CKA_CHECK_VALUE should not be usable to obtain any part of the key value. 1664
3. Non-uniqueness. Two different keys can have the same CKA_CHECK_VALUE. This is unlikely 1665 (the probability can easily be calculated) but possible. 1666
The attribute is optional, but if supported, regardless of how the key object is created or derived, the value 1667 of the attribute is always supplied. It SHALL be supplied even if the encryption operation for the key is 1668 forbidden (i.e. when CKA_ENCRYPT is set to CK_FALSE). 1669
If a value is supplied in the application template (allowed but never necessary) then, if supported, it MUST 1670 match what the library calculates it to be or the library returns a CKR_ATTRIBUTE_VALUE_INVALID. If 1671 the library does not support the attribute then it should ignore it. Allowing the attribute in the template this 1672 way does no harm and allows the attribute to be treated like any other attribute for the purposes of key 1673 wrap and unwrap where the attributes are preserved also. 1674
The generation of the KCV may be prevented by the application supplying the attribute in the template as 1675 a no-value (0 length) entry. The application can query the value at any time like any other attribute using 1676 C_GetAttributeValue. C_SetAttributeValue may be used to destroy the attribute, by supplying no-value. 1677
Unless otherwise specified for the object definition, the value of this attribute is derived from the key 1678 object by taking the first three bytes of an encryption of a single block of null (0x00) bytes, using the 1679 default cipher and mode (e.g. ECB) associated with the key type of the secret key object. 1680
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 61 of 168
4.11 Domain parameter objects 1681
4.11.1 Definitions 1682
This section defines the object class CKO_DOMAIN_PARAMETERS for type CK_OBJECT_CLASS as 1683 used in the CKA_CLASS attribute of objects. 1684
4.11.2 Overview 1685
This object class was created to support the storage of certain algorithm's extended parameters. DSA 1686 and DH both use domain parameters in the key-pair generation step. In particular, some libraries support 1687 the generation of domain parameters (originally out of scope for PKCS11) so the object class was added. 1688
To use a domain parameter object you MUST extract the attributes into a template and supply them (still 1689 in the template) to the corresponding key-pair generation function. 1690
Domain parameter objects (object class CKO_DOMAIN_PARAMETERS) hold public domain parameters. 1691
The following table defines the attributes common to domain parameter objects in addition to the common 1692 attributes defined for this object class: 1693
Table 29, Common Domain Parameter Attributes 1694
Attribute Data Type Meaning
CKA_KEY_TYPE1 CK_KEY_TYPE Type of key the domain parameters can be used to generate.
CKA_LOCAL2,4 CK_BBOOL CK_TRUE only if domain parameters were either
• generated locally (i.e., on the token) with a C_GenerateKey
• created with a C_CopyObject call as a copy of domain parameters which had its CKA_LOCAL attribute set to CK_TRUE
- Refer to Table 11 for footnotes 1695
The CKA_LOCAL attribute has the value CK_TRUE if and only if the values of the domain parameters 1696 were originally generated on the token by a C_GenerateKey call. 1697
4.12 Mechanism objects 1698
4.12.1 Definitions 1699
This section defines the object class CKO_MECHANISM for type CK_OBJECT_CLASS as used in the 1700 CKA_CLASS attribute of objects. 1701
4.12.2 Overview 1702
Mechanism objects provide information about mechanisms supported by a device beyond that given by 1703 the CK_MECHANISM_INFO structure. 1704
When searching for objects using C_FindObjectsInit and C_FindObjects, mechanism objects are not 1705 returned unless the CKA_CLASS attribute in the template has the value CKO_MECHANISM. This 1706 protects applications written to previous versions of Cryptoki from finding objects that they do not 1707 understand. 1708
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 62 of 168
Table 30, Common Mechanism Attributes 1709
Attribute Data Type Meaning
CKA_MECHANISM_TYPE CK_MECHANISM_TYPE The type of mechanism object
The CKA_MECHANISM_TYPE attribute may not be set. 1710
1711
4.13 Profile objects 1712
4.13.1 Definitions 1713
This section defines the object class CKO_PROFILE for type CK_OBJECT_CLASS as used in the 1714 CKA_CLASS attribute of objects. 1715
4.13.2 Overview 1716
Profile objects (object class CKO_PROFILE) describe which PKCS #11 profiles the token implements. 1717 Profiles are defined in the OASIS PKCS #11 Cryptographic Token Interface Profiles document. A given 1718 token can contain more than one profile ID. The following table lists the attributes supported by profile 1719 objects, in addition to the common attributes defined for this object class: 1720
Table 31, Profile Object Attributes 1721
Attribute Data type Meaning
CKA_PROFILE_ID CK_PROFILE_ID ID of the supported profile.
The CKA_PROFILE_ID attribute identifies a profile that the token supports. 1722
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 63 of 168
5 Functions 1723
Cryptoki's functions are organized into the following categories: 1724
• general-purpose functions (4 functions) 1725
• slot and token management functions (9 functions) 1726
• session management functions (8 functions) 1727
• object management functions (9 functions) 1728
• encryption functions (4 functions) 1729
• message-based encryption functions (5 functions) 1730
• decryption functions (4 functions) 1731
• message digesting functions (5 functions) 1732
• signing and MACing functions (6 functions) 1733
• functions for verifying signatures and MACs (6 functions) 1734
• dual-purpose cryptographic functions (4 functions) 1735
• key management functions (5 functions) 1736
• random number generation functions (2 functions) 1737
• parallel function management functions (2 functions) 1738
1739
In addition to these functions, Cryptoki can use application-supplied callback functions to notify an 1740 application of certain events, and can also use application-supplied functions to handle mutex objects for 1741 safe multi-threaded library access. 1742
The Cryptoki API functions are presented in the following table: 1743
Table 32, Summary of Cryptoki Functions 1744
Category Function Description
General C_Initialize initializes Cryptoki
purpose functions
C_Finalize clean up miscellaneous Cryptoki-associated resources
C_GetInfo obtains general information about Cryptoki
C_GetFunctionList obtains entry points of Cryptoki library functions
C_GetInterfaceList obtains list of interfaces supported by Cryptoki library
C_GetInterface obtains interface specific entry points to Cryptoki library functions
Slot and token C_GetSlotList obtains a list of slots in the system
management C_GetSlotInfo obtains information about a particular slot
functions C_GetTokenInfo obtains information about a particular token
C_WaitForSlotEvent waits for a slot event (token insertion, removal, etc.) to occur
C_GetMechanismList obtains a list of mechanisms supported by a token
C_GetMechanismInfo obtains information about a particular mechanism
C_InitToken initializes a token
C_InitPIN initializes the normal user’s PIN
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 64 of 168
Category Function Description
C_SetPIN modifies the PIN of the current user
Session management functions
C_OpenSession opens a connection between an application and a particular token or sets up an application callback for token insertion
C_CloseSession closes a session
C_CloseAllSessions closes all sessions with a token
C_GetSessionInfo obtains information about the session
C_SessionCancel terminates active session based operations
C_GetOperationState obtains the cryptographic operations state of a session
C_SetOperationState sets the cryptographic operations state of a session
C_Login logs into a token
C_LoginUser logs into a token with explicit user name
C_Logout logs out from a token
Object C_CreateObject creates an object
management C_CopyObject creates a copy of an object
functions C_DestroyObject destroys an object
C_GetObjectSize obtains the size of an object in bytes
C_GetAttributeValue obtains an attribute value of an object
C_SetAttributeValue modifies an attribute value of an object
C_FindObjectsInit initializes an object search operation
C_FindObjects continues an object search operation
C_FindObjectsFinal finishes an object search operation
Encryption C_EncryptInit initializes an encryption operation
functions C_Encrypt encrypts single-part data
C_EncryptUpdate continues a multiple-part encryption operation
C_EncryptFinal finishes a multiple-part encryption operation
Message-based Encryption Functions
C_MessageEncryptInit initializes a message-based encryption process
C_EncryptMessage encrypts a single-part message
C_EncryptMessageBegin begins a multiple-part message encryption operation
C_EncryptMessageNext continues or finishes a multiple-part message encryption operation
C_MessageEncryptFinal finishes a message-based encryption process
Decryption C_DecryptInit initializes a decryption operation
Functions C_Decrypt decrypts single-part encrypted data
C_DecryptUpdate continues a multiple-part decryption operation
C_DecryptFinal finishes a multiple-part decryption operation
Message-based
Decryption
Functions
C_MessageDecryptInit initializes a message decryption operation
C_DecryptMessage decrypts single-part data
C_DecryptMessageBegin starts a multiple-part message decryption operation
C_DecryptMessageNext Continues and finishes a multiple-part message decryption operation
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 65 of 168
Category Function Description
C_MessageDecryptFinal finishes a message decryption operation
Message C_DigestInit initializes a message-digesting operation
Digesting C_Digest digests single-part data
Functions C_DigestUpdate continues a multiple-part digesting operation
C_DigestKey digests a key
C_DigestFinal finishes a multiple-part digesting operation
Signing C_SignInit initializes a signature operation
and MACing C_Sign signs single-part data
functions C_SignUpdate continues a multiple-part signature operation
C_SignFinal finishes a multiple-part signature operation
C_SignRecoverInit initializes a signature operation, where the data can be recovered from the signature
C_SignRecover signs single-part data, where the data can be recovered from the signature
Message-based Signature functions
C_MessageSignInit initializes a message signature operation
C_SignMessage signs single-part data
C_SignMessageBegin starts a multiple-part message signature operation
C_SignMessageNext continues and finishes a multiple-part message signature operation
C_MessageSignFinal finishes a message signature operation
Functions for verifying
C_VerifyInit initializes a verification operation
signatures C_Verify verifies a signature on single-part data
and MACs C_VerifyUpdate continues a multiple-part verification operation
C_VerifyFinal finishes a multiple-part verification operation
C_VerifyRecoverInit initializes a verification operation where the data is recovered from the signature
C_VerifyRecover verifies a signature on single-part data, where the data is recovered from the signature
Message-based Functions for verifying signatures and MACs
C_MessageVerifyInit initializes a message verification operation
C_VerifyMessage verifies single-part data
C_VerifyMessageBegin starts a multiple-part message verification operation
C_VerifyMessageNext continues and finishes a multiple-part message verification operation
C_MessageVerifyFinal finishes a message verification operation
Dual-purpose cryptographic
C_DigestEncryptUpdate continues simultaneous multiple-part digesting and encryption operations
functions C_DecryptDigestUpdate continues simultaneous multiple-part decryption and digesting operations
C_SignEncryptUpdate continues simultaneous multiple-part signature and encryption operations
C_DecryptVerifyUpdate continues simultaneous multiple-part decryption and verification operations
Key C_GenerateKey generates a secret key
management C_GenerateKeyPair generates a public-key/private-key pair
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 66 of 168
Category Function Description
functions C_WrapKey wraps (encrypts) a key
C_UnwrapKey unwraps (decrypts) a key
C_DeriveKey derives a key from a base key
Random number generation
C_SeedRandom mixes in additional seed material to the random number generator
functions C_GenerateRandom generates random data
Parallel function management
C_GetFunctionStatus legacy function which always returns CKR_FUNCTION_NOT_PARALLEL
functions C_CancelFunction legacy function which always returns CKR_FUNCTION_NOT_PARALLEL
Callback function application-supplied function to process notifications from Cryptoki
1745
Execution of a Cryptoki function call is in general an all-or-nothing affair, i.e., a function call accomplishes 1746 either its entire goal, or nothing at all. 1747
• If a Cryptoki function executes successfully, it returns the value CKR_OK. 1748
• If a Cryptoki function does not execute successfully, it returns some value other than CKR_OK, and 1749 the token is in the same state as it was in prior to the function call. If the function call was supposed 1750 to modify the contents of certain memory addresses on the host computer, these memory addresses 1751 may have been modified, despite the failure of the function. 1752
• In unusual (and extremely unpleasant!) circumstances, a function can fail with the return value 1753 CKR_GENERAL_ERROR. When this happens, the token and/or host computer may be in an 1754 inconsistent state, and the goals of the function may have been partially achieved. 1755
There are a small number of Cryptoki functions whose return values do not behave precisely as 1756 described above; these exceptions are documented individually with the description of the functions 1757 themselves. 1758
A Cryptoki library need not support every function in the Cryptoki API. However, even an unsupported 1759 function MUST have a “stub” in the library which simply returns the value 1760 CKR_FUNCTION_NOT_SUPPORTED. The function’s entry in the library’s CK_FUNCTION_LIST 1761 structure (as obtained by C_GetFunctionList) should point to this stub function (see Section 3.6). 1762
5.1 Function return values 1763
The Cryptoki interface possesses a large number of functions and return values. In Section 5.1, we 1764 enumerate the various possible return values for Cryptoki functions; most of the remainder of Section 5.1 1765 details the behavior of Cryptoki functions, including what values each of them may return. 1766
Because of the complexity of the Cryptoki specification, it is recommended that Cryptoki applications 1767 attempt to give some leeway when interpreting Cryptoki functions’ return values. We have attempted to 1768 specify the behavior of Cryptoki functions as completely as was feasible; nevertheless, there are 1769 presumably some gaps. For example, it is possible that a particular error code which might apply to a 1770 particular Cryptoki function is unfortunately not actually listed in the description of that function as a 1771 possible error code. It is conceivable that the developer of a Cryptoki library might nevertheless permit 1772 his/her implementation of that function to return that error code. It would clearly be somewhat ungraceful 1773 if a Cryptoki application using that library were to terminate by abruptly dumping core upon receiving that 1774 error code for that function. It would be far preferable for the application to examine the function’s return 1775 value, see that it indicates some sort of error (even if the application doesn’t know precisely what kind of 1776 error), and behave accordingly. 1777
See Section 5.1.8 for some specific details on how a developer might attempt to make an application that 1778 accommodates a range of behaviors from Cryptoki libraries. 1779
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 67 of 168
5.1.1 Universal Cryptoki function return values 1780
Any Cryptoki function can return any of the following values: 1781
• CKR_GENERAL_ERROR: Some horrible, unrecoverable error has occurred. In the worst case, it is 1782 possible that the function only partially succeeded, and that the computer and/or token is in an 1783 inconsistent state. 1784
• CKR_HOST_MEMORY: The computer that the Cryptoki library is running on has insufficient memory 1785 to perform the requested function. 1786
• CKR_FUNCTION_FAILED: The requested function could not be performed, but detailed information 1787 about why not is not available in this error return. If the failed function uses a session, it is possible 1788 that the CK_SESSION_INFO structure that can be obtained by calling C_GetSessionInfo will hold 1789 useful information about what happened in its ulDeviceError field. In any event, although the function 1790 call failed, the situation is not necessarily totally hopeless, as it is likely to be when 1791 CKR_GENERAL_ERROR is returned. Depending on what the root cause of the error actually was, it 1792 is possible that an attempt to make the exact same function call again would succeed. 1793
• CKR_OK: The function executed successfully. Technically, CKR_OK is not quite a “universal” return 1794 value; in particular, the legacy functions C_GetFunctionStatus and C_CancelFunction (see Section 1795 5.20) cannot return CKR_OK. 1796
The relative priorities of these errors are in the order listed above, e.g., if either of 1797 CKR_GENERAL_ERROR or CKR_HOST_MEMORY would be an appropriate error return, then 1798 CKR_GENERAL_ERROR should be returned. 1799
5.1.2 Cryptoki function return values for functions that use a session 1800
handle 1801
Any Cryptoki function that takes a session handle as one of its arguments (i.e., any Cryptoki function 1802 except for C_Initialize, C_Finalize, C_GetInfo, C_GetFunctionList, C_GetSlotList, C_GetSlotInfo, 1803 C_GetTokenInfo, C_WaitForSlotEvent, C_GetMechanismList, C_GetMechanismInfo, C_InitToken, 1804
C_OpenSession, and C_CloseAllSessions) can return the following values: 1805
• CKR_SESSION_HANDLE_INVALID: The specified session handle was invalid at the time that the 1806 function was invoked. Note that this can happen if the session’s token is removed before the function 1807 invocation, since removing a token closes all sessions with it. 1808
• CKR_DEVICE_REMOVED: The token was removed from its slot during the execution of the function. 1809
• CKR_SESSION_CLOSED: The session was closed during the execution of the function. Note that, 1810 as stated in [PKCS11-UG], the behavior of Cryptoki is undefined if multiple threads of an application 1811 attempt to access a common Cryptoki session simultaneously. Therefore, there is actually no 1812 guarantee that a function invocation could ever return the value CKR_SESSION_CLOSED. An 1813 example of multiple threads accessing a common session simultaneously is where one thread is 1814 using a session when another thread closes that same session. 1815
The relative priorities of these errors are in the order listed above, e.g., if either of 1816 CKR_SESSION_HANDLE_INVALID or CKR_DEVICE_REMOVED would be an appropriate error return, 1817 then CKR_SESSION_HANDLE_INVALID should be returned. 1818
In practice, it is often not crucial (or possible) for a Cryptoki library to be able to make a distinction 1819 between a token being removed before a function invocation and a token being removed during a 1820 function execution. 1821
5.1.3 Cryptoki function return values for functions that use a token 1822
Any Cryptoki function that uses a particular token (i.e., any Cryptoki function except for C_Initialize, 1823 C_Finalize, C_GetInfo, C_GetFunctionList, C_GetSlotList, C_GetSlotInfo, or C_WaitForSlotEvent) 1824 can return any of the following values: 1825
• CKR_DEVICE_MEMORY: The token does not have sufficient memory to perform the requested 1826 function. 1827
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 68 of 168
• CKR_DEVICE_ERROR: Some problem has occurred with the token and/or slot. This error code can 1828 be returned by more than just the functions mentioned above; in particular, it is possible for 1829 C_GetSlotInfo to return CKR_DEVICE_ERROR. 1830
• CKR_TOKEN_NOT_PRESENT: The token was not present in its slot at the time that the function was 1831 invoked. 1832
• CKR_DEVICE_REMOVED: The token was removed from its slot during the execution of the function. 1833
The relative priorities of these errors are in the order listed above, e.g., if either of 1834 CKR_DEVICE_MEMORY or CKR_DEVICE_ERROR would be an appropriate error return, then 1835 CKR_DEVICE_MEMORY should be returned. 1836
In practice, it is often not critical (or possible) for a Cryptoki library to be able to make a distinction 1837 between a token being removed before a function invocation and a token being removed during a 1838 function execution. 1839
5.1.4 Special return value for application-supplied callbacks 1840
There is a special-purpose return value which is not returned by any function in the actual Cryptoki API, 1841 but which may be returned by an application-supplied callback function. It is: 1842
• CKR_CANCEL: When a function executing in serial with an application decides to give the application 1843 a chance to do some work, it calls an application-supplied function with a CKN_SURRENDER 1844 callback (see Section 5.21). If the callback returns the value CKR_CANCEL, then the function aborts 1845 and returns CKR_FUNCTION_CANCELED. 1846
5.1.5 Special return values for mutex-handling functions 1847
There are two other special-purpose return values which are not returned by any actual Cryptoki 1848 functions. These values may be returned by application-supplied mutex-handling functions, and they may 1849 safely be ignored by application developers who are not using their own threading model. They are: 1850
• CKR_MUTEX_BAD: This error code can be returned by mutex-handling functions that are passed a 1851 bad mutex object as an argument. Unfortunately, it is possible for such a function not to recognize a 1852 bad mutex object. There is therefore no guarantee that such a function will successfully detect bad 1853 mutex objects and return this value. 1854
• CKR_MUTEX_NOT_LOCKED: This error code can be returned by mutex-unlocking functions. It 1855 indicates that the mutex supplied to the mutex-unlocking function was not locked. 1856
5.1.6 All other Cryptoki function return values 1857
Descriptions of the other Cryptoki function return values follow. Except as mentioned in the descriptions 1858 of particular error codes, there are in general no particular priorities among the errors listed below, i.e., if 1859 more than one error code might apply to an execution of a function, then the function may return any 1860 applicable error code. 1861
• CKR_ACTION_PROHIBITED: This value can only be returned by C_CopyObject, 1862 C_SetAttributeValue and C_DestroyObject. It denotes that the action may not be taken, either 1863 because of underlying policy restrictions on the token, or because the object has the relevant 1864 CKA_COPYABLE, CKA_MODIFIABLE or CKA_DESTROYABLE policy attribute set to CK_FALSE. 1865
• CKR_ARGUMENTS_BAD: This is a rather generic error code which indicates that the arguments 1866 supplied to the Cryptoki function were in some way not appropriate. 1867
• CKR_ATTRIBUTE_READ_ONLY: An attempt was made to set a value for an attribute which may not 1868 be set by the application, or which may not be modified by the application. See Section 4.1 for more 1869 information. 1870
• CKR_ATTRIBUTE_SENSITIVE: An attempt was made to obtain the value of an attribute of an object 1871 which cannot be satisfied because the object is either sensitive or un-extractable. 1872
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 69 of 168
• CKR_ATTRIBUTE_TYPE_INVALID: An invalid attribute type was specified in a template. See 1873 Section 4.1 for more information. 1874
• CKR_ATTRIBUTE_VALUE_INVALID: An invalid value was specified for a particular attribute in a 1875 template. See Section 4.1 for more information. 1876
• CKR_BUFFER_TOO_SMALL: The output of the function is too large to fit in the supplied buffer. 1877
• CKR_CANT_LOCK: This value can only be returned by C_Initialize. It means that the type of locking 1878 requested by the application for thread-safety is not available in this library, and so the application 1879 cannot make use of this library in the specified fashion. 1880
• CKR_CRYPTOKI_ALREADY_INITIALIZED: This value can only be returned by C_Initialize. It 1881 means that the Cryptoki library has already been initialized (by a previous call to C_Initialize which 1882 did not have a matching C_Finalize call). 1883
• CKR_CRYPTOKI_NOT_INITIALIZED: This value can be returned by any function other than 1884 C_Initialize, C_GetFunctionList, C_GetInterfaceList and C_GetInterface. It indicates that the 1885 function cannot be executed because the Cryptoki library has not yet been initialized by a call to 1886 C_Initialize. 1887
• CKR_CURVE_NOT_SUPPORTED: This curve is not supported by this token. Used with Elliptic 1888 Curve mechanisms. 1889
• CKR_DATA_INVALID: The plaintext input data to a cryptographic operation is invalid. This return 1890 value has lower priority than CKR_DATA_LEN_RANGE. 1891
• CKR_DATA_LEN_RANGE: The plaintext input data to a cryptographic operation has a bad length. 1892 Depending on the operation’s mechanism, this could mean that the plaintext data is too short, too 1893 long, or is not a multiple of some particular block size. This return value has higher priority than 1894 CKR_DATA_INVALID. 1895
• CKR_DOMAIN_PARAMS_INVALID: Invalid or unsupported domain parameters were supplied to the 1896 function. Which representation methods of domain parameters are supported by a given mechanism 1897 can vary from token to token. 1898
• CKR_ENCRYPTED_DATA_INVALID: The encrypted input to a decryption operation has been 1899 determined to be invalid ciphertext. This return value has lower priority than 1900 CKR_ENCRYPTED_DATA_LEN_RANGE. 1901
• CKR_ENCRYPTED_DATA_LEN_RANGE: The ciphertext input to a decryption operation has been 1902 determined to be invalid ciphertext solely on the basis of its length. Depending on the operation’s 1903 mechanism, this could mean that the ciphertext is too short, too long, or is not a multiple of some 1904 particular block size. This return value has higher priority than CKR_ENCRYPTED_DATA_INVALID. 1905
• CKR_EXCEEDED_MAX_ITERATIONS: An iterative algorithm (for key pair generation, domain 1906 parameter generation etc.) failed because we have exceeded the maximum number of iterations. 1907 This error code has precedence over CKR_FUNCTION_FAILED. Examples of iterative algorithms 1908 include DSA signature generation (retry if either r = 0 or s = 0) and generation of DSA primes p and q 1909 specified in FIPS 186-4. 1910
• CKR_FIPS_SELF_TEST_FAILED: A FIPS 140-2 power-up self-test or conditional self-test failed. 1911 The token entered an error state. Future calls to cryptographic functions on the token will return 1912 CKR_GENERAL_ERROR. CKR_FIPS_SELF_TEST_FAILED has a higher precedence over 1913 CKR_GENERAL_ERROR. This error may be returned by C_Initialize, if a power-up self-test failed, 1914 by C_GenerateRandom or C_SeedRandom, if the continuous random number generator test failed, 1915 or by C_GenerateKeyPair, if the pair-wise consistency test failed. 1916
• CKR_FUNCTION_CANCELED: The function was canceled in mid-execution. This happens to a 1917 cryptographic function if the function makes a CKN_SURRENDER application callback which returns 1918 CKR_CANCEL (see CKR_CANCEL). It also happens to a function that performs PIN entry through a 1919 protected path. The method used to cancel a protected path PIN entry operation is device dependent. 1920
• CKR_FUNCTION_NOT_PARALLEL: There is currently no function executing in parallel in the 1921 specified session. This is a legacy error code which is only returned by the legacy functions 1922 C_GetFunctionStatus and C_CancelFunction. 1923
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 70 of 168
• CKR_FUNCTION_NOT_SUPPORTED: The requested function is not supported by this Cryptoki 1924 library. Even unsupported functions in the Cryptoki API should have a “stub” in the library; this stub 1925 should simply return the value CKR_FUNCTION_NOT_SUPPORTED. 1926
• CKR_FUNCTION_REJECTED: The signature request is rejected by the user. 1927
• CKR_INFORMATION_SENSITIVE: The information requested could not be obtained because the 1928 token considers it sensitive, and is not able or willing to reveal it. 1929
• CKR_KEY_CHANGED: This value is only returned by C_SetOperationState. It indicates that one of 1930 the keys specified is not the same key that was being used in the original saved session. 1931
• CKR_KEY_FUNCTION_NOT_PERMITTED: An attempt has been made to use a key for a 1932 cryptographic purpose that the key’s attributes are not set to allow it to do. For example, to use a key 1933 for performing encryption, that key MUST have its CKA_ENCRYPT attribute set to CK_TRUE (the 1934 fact that the key MUST have a CKA_ENCRYPT attribute implies that the key cannot be a private 1935 key). This return value has lower priority than CKR_KEY_TYPE_INCONSISTENT. 1936
• CKR_KEY_HANDLE_INVALID: The specified key handle is not valid. It may be the case that the 1937 specified handle is a valid handle for an object which is not a key. We reiterate here that 0 is never a 1938 valid key handle. 1939
• CKR_KEY_INDIGESTIBLE: This error code can only be returned by C_DigestKey. It indicates that 1940 the value of the specified key cannot be digested for some reason (perhaps the key isn’t a secret key, 1941 or perhaps the token simply can’t digest this kind of key). 1942
• CKR_KEY_NEEDED: This value is only returned by C_SetOperationState. It indicates that the 1943 session state cannot be restored because C_SetOperationState needs to be supplied with one or 1944 more keys that were being used in the original saved session. 1945
• CKR_KEY_NOT_NEEDED: An extraneous key was supplied to C_SetOperationState. For 1946 example, an attempt was made to restore a session that had been performing a message digesting 1947 operation, and an encryption key was supplied. 1948
• CKR_KEY_NOT_WRAPPABLE: Although the specified private or secret key does not have its 1949 CKA_EXTRACTABLE attribute set to CK_FALSE, Cryptoki (or the token) is unable to wrap the key as 1950 requested (possibly the token can only wrap a given key with certain types of keys, and the wrapping 1951 key specified is not one of these types). Compare with CKR_KEY_UNEXTRACTABLE. 1952
• CKR_KEY_SIZE_RANGE: Although the requested keyed cryptographic operation could in principle 1953 be carried out, this Cryptoki library (or the token) is unable to actually do it because the supplied key‘s 1954 size is outside the range of key sizes that it can handle. 1955
• CKR_KEY_TYPE_INCONSISTENT: The specified key is not the correct type of key to use with the 1956 specified mechanism. This return value has a higher priority than 1957 CKR_KEY_FUNCTION_NOT_PERMITTED. 1958
• CKR_KEY_UNEXTRACTABLE: The specified private or secret key can’t be wrapped because its 1959 CKA_EXTRACTABLE attribute is set to CK_FALSE. Compare with CKR_KEY_NOT_WRAPPABLE. 1960
• CKR_LIBRARY_LOAD_FAILED: The Cryptoki library could not load a dependent shared library. 1961
• CKR_MECHANISM_INVALID: An invalid mechanism was specified to the cryptographic operation. 1962 This error code is an appropriate return value if an unknown mechanism was specified or if the 1963 mechanism specified cannot be used in the selected token with the selected function. 1964
• CKR_MECHANISM_PARAM_INVALID: Invalid parameters were supplied to the mechanism specified 1965 to the cryptographic operation. Which parameter values are supported by a given mechanism can 1966 vary from token to token. 1967
• CKR_NEED_TO_CREATE_THREADS: This value can only be returned by C_Initialize. It is 1968 returned when two conditions hold: 1969
1. The application called C_Initialize in a way which tells the Cryptoki library that application 1970 threads executing calls to the library cannot use native operating system methods to spawn new 1971 threads. 1972
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 71 of 168
2. The library cannot function properly without being able to spawn new threads in the above 1973 fashion. 1974
• CKR_NO_EVENT: This value can only be returned by C_WaitForSlotEvent. It is returned when 1975 C_WaitForSlotEvent is called in non-blocking mode and there are no new slot events to return. 1976
• CKR_OBJECT_HANDLE_INVALID: The specified object handle is not valid. We reiterate here that 0 1977 is never a valid object handle. 1978
• CKR_OPERATION_ACTIVE: There is already an active operation (or combination of active 1979 operations) which prevents Cryptoki from activating the specified operation. For example, an active 1980 object-searching operation would prevent Cryptoki from activating an encryption operation with 1981 C_EncryptInit. Or, an active digesting operation and an active encryption operation would prevent 1982 Cryptoki from activating a signature operation. Or, on a token which doesn’t support simultaneous 1983 dual cryptographic operations in a session (see the description of the 1984 CKF_DUAL_CRYPTO_OPERATIONS flag in the CK_TOKEN_INFO structure), an active signature 1985 operation would prevent Cryptoki from activating an encryption operation. 1986
• CKR_OPERATION_NOT_INITIALIZED: There is no active operation of an appropriate type in the 1987 specified session. For example, an application cannot call C_Encrypt in a session without having 1988 called C_EncryptInit first to activate an encryption operation. 1989
• CKR_PIN_EXPIRED: The specified PIN has expired, and the requested operation cannot be carried 1990 out unless C_SetPIN is called to change the PIN value. Whether or not the normal user’s PIN on a 1991 token ever expires varies from token to token. 1992
• CKR_PIN_INCORRECT: The specified PIN is incorrect, i.e., does not match the PIN stored on the 1993 token. More generally-- when authentication to the token involves something other than a PIN-- the 1994 attempt to authenticate the user has failed. 1995
• CKR_PIN_INVALID: The specified PIN has invalid characters in it. This return code only applies to 1996 functions which attempt to set a PIN. 1997
• CKR_PIN_LEN_RANGE: The specified PIN is too long or too short. This return code only applies to 1998 functions which attempt to set a PIN. 1999
• CKR_PIN_LOCKED: The specified PIN is “locked”, and cannot be used. That is, because some 2000 particular number of failed authentication attempts has been reached, the token is unwilling to permit 2001 further attempts at authentication. Depending on the token, the specified PIN may or may not remain 2002 locked indefinitely. 2003
• CKR_PIN_TOO_WEAK: The specified PIN is too weak so that it could be easy to guess. If the PIN is 2004 too short, CKR_PIN_LEN_RANGE should be returned instead. This return code only applies to 2005 functions which attempt to set a PIN. 2006
• CKR_PUBLIC_KEY_INVALID: The public key fails a public key validation. For example, an EC 2007 public key fails the public key validation specified in Section 5.2.2 of ANSI X9.62. This error code may 2008 be returned by C_CreateObject, when the public key is created, or by C_VerifyInit or 2009 C_VerifyRecoverInit, when the public key is used. It may also be returned by C_DeriveKey, in 2010 preference to CKR_MECHANISM_PARAM_INVALID, if the other party's public key specified in the 2011 mechanism's parameters is invalid. 2012
• CKR_RANDOM_NO_RNG: This value can be returned by C_SeedRandom and 2013 C_GenerateRandom. It indicates that the specified token doesn’t have a random number generator. 2014 This return value has higher priority than CKR_RANDOM_SEED_NOT_SUPPORTED. 2015
• CKR_RANDOM_SEED_NOT_SUPPORTED: This value can only be returned by C_SeedRandom. 2016 It indicates that the token’s random number generator does not accept seeding from an application. 2017 This return value has lower priority than CKR_RANDOM_NO_RNG. 2018
• CKR_SAVED_STATE_INVALID: This value can only be returned by C_SetOperationState. It 2019 indicates that the supplied saved cryptographic operations state is invalid, and so it cannot be 2020 restored to the specified session. 2021
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 72 of 168
• CKR_SESSION_COUNT: This value can only be returned by C_OpenSession. It indicates that the 2022 attempt to open a session failed, either because the token has too many sessions already open, or 2023 because the token has too many read/write sessions already open. 2024
• CKR_SESSION_EXISTS: This value can only be returned by C_InitToken. It indicates that a 2025 session with the token is already open, and so the token cannot be initialized. 2026
• CKR_SESSION_PARALLEL_NOT_SUPPORTED: The specified token does not support parallel 2027 sessions. This is a legacy error code—in Cryptoki Version 2.01 and up, no token supports parallel 2028 sessions. CKR_SESSION_PARALLEL_NOT_SUPPORTED can only be returned by 2029 C_OpenSession, and it is only returned when C_OpenSession is called in a particular [deprecated] 2030 way. 2031
• CKR_SESSION_READ_ONLY: The specified session was unable to accomplish the desired action 2032 because it is a read-only session. This return value has lower priority than 2033 CKR_TOKEN_WRITE_PROTECTED. 2034
• CKR_SESSION_READ_ONLY_EXISTS: A read-only session already exists, and so the SO cannot 2035 be logged in. 2036
• CKR_SESSION_READ_WRITE_SO_EXISTS: A read/write SO session already exists, and so a 2037 read-only session cannot be opened. 2038
• CKR_SIGNATURE_LEN_RANGE: The provided signature/MAC can be seen to be invalid solely on 2039 the basis of its length. This return value has higher priority than CKR_SIGNATURE_INVALID. 2040
• CKR_SIGNATURE_INVALID: The provided signature/MAC is invalid. This return value has lower 2041 priority than CKR_SIGNATURE_LEN_RANGE. 2042
• CKR_SLOT_ID_INVALID: The specified slot ID is not valid. 2043
• CKR_STATE_UNSAVEABLE: The cryptographic operations state of the specified session cannot be 2044 saved for some reason (possibly the token is simply unable to save the current state). This return 2045 value has lower priority than CKR_OPERATION_NOT_INITIALIZED. 2046
• CKR_TEMPLATE_INCOMPLETE: The template specified for creating an object is incomplete, and 2047 lacks some necessary attributes. See Section 4.1 for more information. 2048
• CKR_TEMPLATE_INCONSISTENT: The template specified for creating an object has conflicting 2049 attributes. See Section 4.1 for more information. 2050
• CKR_TOKEN_NOT_RECOGNIZED: The Cryptoki library and/or slot does not recognize the token in 2051 the slot. 2052
• CKR_TOKEN_WRITE_PROTECTED: The requested action could not be performed because the 2053 token is write-protected. This return value has higher priority than CKR_SESSION_READ_ONLY. 2054
• CKR_UNWRAPPING_KEY_HANDLE_INVALID: This value can only be returned by C_UnwrapKey. 2055 It indicates that the key handle specified to be used to unwrap another key is not valid. 2056
• CKR_UNWRAPPING_KEY_SIZE_RANGE: This value can only be returned by C_UnwrapKey. It 2057 indicates that although the requested unwrapping operation could in principle be carried out, this 2058 Cryptoki library (or the token) is unable to actually do it because the supplied key’s size is outside the 2059 range of key sizes that it can handle. 2060
• CKR_UNWRAPPING_KEY_TYPE_INCONSISTENT: This value can only be returned by 2061 C_UnwrapKey. It indicates that the type of the key specified to unwrap another key is not consistent 2062 with the mechanism specified for unwrapping. 2063
• CKR_USER_ALREADY_LOGGED_IN: This value can only be returned by C_Login. It indicates that 2064 the specified user cannot be logged into the session, because it is already logged into the session. 2065 For example, if an application has an open SO session, and it attempts to log the SO into it, it will 2066 receive this error code. 2067
• CKR_USER_ANOTHER_ALREADY_LOGGED_IN: This value can only be returned by C_Login. It 2068 indicates that the specified user cannot be logged into the session, because another user is already 2069
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 73 of 168
logged into the session. For example, if an application has an open SO session, and it attempts to 2070 log the normal user into it, it will receive this error code. 2071
• CKR_USER_NOT_LOGGED_IN: The desired action cannot be performed because the appropriate 2072 user (or an appropriate user) is not logged in. One example is that a session cannot be logged out 2073 unless it is logged in. Another example is that a private object cannot be created on a token unless 2074 the session attempting to create it is logged in as the normal user. A final example is that 2075 cryptographic operations on certain tokens cannot be performed unless the normal user is logged in. 2076
• CKR_USER_PIN_NOT_INITIALIZED: This value can only be returned by C_Login. It indicates that 2077 the normal user’s PIN has not yet been initialized with C_InitPIN. 2078
• CKR_USER_TOO_MANY_TYPES: An attempt was made to have more distinct users simultaneously 2079 logged into the token than the token and/or library permits. For example, if some application has an 2080 open SO session, and another application attempts to log the normal user into a session, the attempt 2081 may return this error. It is not required to, however. Only if the simultaneous distinct users cannot be 2082 supported does C_Login have to return this value. Note that this error code generalizes to true multi-2083 user tokens. 2084
• CKR_USER_TYPE_INVALID: An invalid value was specified as a CK_USER_TYPE. Valid types are 2085 CKU_SO, CKU_USER, and CKU_CONTEXT_SPECIFIC. 2086
• CKR_WRAPPED_KEY_INVALID: This value can only be returned by C_UnwrapKey. It indicates 2087 that the provided wrapped key is not valid. If a call is made to C_UnwrapKey to unwrap a particular 2088 type of key (i.e., some particular key type is specified in the template provided to C_UnwrapKey), 2089 and the wrapped key provided to C_UnwrapKey is recognizably not a wrapped key of the proper 2090 type, then C_UnwrapKey should return CKR_WRAPPED_KEY_INVALID. This return value has 2091 lower priority than CKR_WRAPPED_KEY_LEN_RANGE. 2092
• CKR_WRAPPED_KEY_LEN_RANGE: This value can only be returned by C_UnwrapKey. It 2093 indicates that the provided wrapped key can be seen to be invalid solely on the basis of its length. 2094 This return value has higher priority than CKR_WRAPPED_KEY_INVALID. 2095
• CKR_WRAPPING_KEY_HANDLE_INVALID: This value can only be returned by C_WrapKey. It 2096 indicates that the key handle specified to be used to wrap another key is not valid. 2097
• CKR_WRAPPING_KEY_SIZE_RANGE: This value can only be returned by C_WrapKey. It indicates 2098 that although the requested wrapping operation could in principle be carried out, this Cryptoki library 2099 (or the token) is unable to actually do it because the supplied wrapping key’s size is outside the range 2100 of key sizes that it can handle. 2101
• CKR_WRAPPING_KEY_TYPE_INCONSISTENT: This value can only be returned by C_WrapKey. It 2102 indicates that the type of the key specified to wrap another key is not consistent with the mechanism 2103 specified for wrapping. 2104
• CKR_OPERATION_CANCEL_FAILED: This value can only be returned by C_SessionCancel. It 2105 means that one or more of the requested operations could not be cancelled for implementation or 2106 vendor-specific reasons. 2107
5.1.7 More on relative priorities of Cryptoki errors 2108
In general, when a Cryptoki call is made, error codes from Section 5.1.1 (other than CKR_OK) take 2109 precedence over error codes from Section 5.1.2, which take precedence over error codes from Section 2110 5.1.3, which take precedence over error codes from Section 5.1.6. One minor implication of this is that 2111 functions that use a session handle (i.e., most functions!) never return the error code 2112 CKR_TOKEN_NOT_PRESENT (they return CKR_SESSION_HANDLE_INVALID instead). Other than 2113 these precedences, if more than one error code applies to the result of a Cryptoki call, any of the 2114 applicable error codes may be returned. Exceptions to this rule will be explicitly mentioned in the 2115 descriptions of functions. 2116
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 74 of 168
5.1.8 Error code “gotchas” 2117
Here is a short list of a few particular things about return values that Cryptoki developers might want to be 2118 aware of: 2119
1. As mentioned in Sections 5.1.2 and 5.1.3, a Cryptoki library may not be able to make a distinction 2120 between a token being removed before a function invocation and a token being removed during a 2121 function invocation. 2122
2. As mentioned in Section 5.1.2, an application should never count on getting a 2123 CKR_SESSION_CLOSED error. 2124
3. The difference between CKR_DATA_INVALID and CKR_DATA_LEN_RANGE can be somewhat 2125 subtle. Unless an application needs to be able to distinguish between these return values, it is best to 2126 always treat them equivalently. 2127
4. Similarly, the difference between CKR_ENCRYPTED_DATA_INVALID and 2128 CKR_ENCRYPTED_DATA_LEN_RANGE, and between CKR_WRAPPED_KEY_INVALID and 2129 CKR_WRAPPED_KEY_LEN_RANGE, can be subtle, and it may be best to treat these return values 2130 equivalently. 2131
5. Even with the guidance of Section 4.1, it can be difficult for a Cryptoki library developer to know which 2132 of CKR_ATTRIBUTE_VALUE_INVALID, CKR_TEMPLATE_INCOMPLETE, or 2133 CKR_TEMPLATE_INCONSISTENT to return. When possible, it is recommended that application 2134 developers be generous in their interpretations of these error codes. 2135
5.2 Conventions for functions returning output in a variable-length 2136
buffer 2137
A number of the functions defined in Cryptoki return output produced by some cryptographic mechanism. 2138 The amount of output returned by these functions is returned in a variable-length application-supplied 2139 buffer. An example of a function of this sort is C_Encrypt, which takes some plaintext as an argument, 2140 and outputs a buffer full of ciphertext. 2141
These functions have some common calling conventions, which we describe here. Two of the arguments 2142 to the function are a pointer to the output buffer (say pBuf) and a pointer to a location which will hold the 2143 length of the output produced (say pulBufLen). There are two ways for an application to call such a 2144 function: 2145
1. If pBuf is NULL_PTR, then all that the function does is return (in *pulBufLen) a number of bytes which 2146 would suffice to hold the cryptographic output produced from the input to the function. This number 2147 may somewhat exceed the precise number of bytes needed, but should not exceed it by a large 2148 amount. CKR_OK is returned by the function. 2149
2. If pBuf is not NULL_PTR, then *pulBufLen MUST contain the size in bytes of the buffer pointed to by 2150 pBuf. If that buffer is large enough to hold the cryptographic output produced from the input to the 2151 function, then that cryptographic output is placed there, and CKR_OK is returned by the function. If 2152 the buffer is not large enough, then CKR_BUFFER_TOO_SMALL is returned. In either case, 2153 *pulBufLen is set to hold the exact number of bytes needed to hold the cryptographic output produced 2154 from the input to the function. 2155
All functions which use the above convention will explicitly say so. 2156
Cryptographic functions which return output in a variable-length buffer should always return as much 2157 output as can be computed from what has been passed in to them thus far. As an example, consider a 2158 session which is performing a multiple-part decryption operation with DES in cipher-block chaining mode 2159 with PKCS padding. Suppose that, initially, 8 bytes of ciphertext are passed to the C_DecryptUpdate 2160 function. The block size of DES is 8 bytes, but the PKCS padding makes it unclear at this stage whether 2161 the ciphertext was produced from encrypting a 0-byte string, or from encrypting some string of length at 2162 least 8 bytes. Hence the call to C_DecryptUpdate should return 0 bytes of plaintext. If a single 2163 additional byte of ciphertext is supplied by a subsequent call to C_DecryptUpdate, then that call should 2164 return 8 bytes of plaintext (one full DES block). 2165
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 75 of 168
5.3 Disclaimer concerning sample code 2166
For the remainder of this section, we enumerate the various functions defined in Cryptoki. Most functions 2167 will be shown in use in at least one sample code snippet. For the sake of brevity, sample code will 2168 frequently be somewhat incomplete. In particular, sample code will generally ignore possible error 2169 returns from C library functions, and also will not deal with Cryptoki error returns in a realistic fashion. 2170
5.4 General-purpose functions 2171
Cryptoki provides the following general-purpose functions: 2172
5.4.1 C_Initialize 2173
CK_DECLARE_FUNCTION(CK_RV, C_Initialize) { 2174
CK_VOID_PTR pInitArgs 2175
); 2176
C_Initialize initializes the Cryptoki library. pInitArgs either has the value NULL_PTR or points to a 2177 CK_C_INITIALIZE_ARGS structure containing information on how the library should deal with multi-2178 threaded access. If an application will not be accessing Cryptoki through multiple threads simultaneously, 2179 it can generally supply the value NULL_PTR to C_Initialize (the consequences of supplying this value will 2180 be explained below). 2181
If pInitArgs is non-NULL_PTR, C_Initialize should cast it to a CK_C_INITIALIZE_ARGS_PTR and then 2182 dereference the resulting pointer to obtain the CK_C_INITIALIZE_ARGS fields CreateMutex, 2183 DestroyMutex, LockMutex, UnlockMutex, flags, and pReserved. For this version of Cryptoki, the value of 2184 pReserved thereby obtained MUST be NULL_PTR; if it’s not, then C_Initialize should return with the 2185 value CKR_ARGUMENTS_BAD. 2186
If the CKF_LIBRARY_CANT_CREATE_OS_THREADS flag in the flags field is set, that indicates that 2187 application threads which are executing calls to the Cryptoki library are not permitted to use the native 2188 operation system calls to spawn off new threads. In other words, the library’s code may not create its 2189 own threads. If the library is unable to function properly under this restriction, C_Initialize should return 2190 with the value CKR_NEED_TO_CREATE_THREADS. 2191
A call to C_Initialize specifies one of four different ways to support multi-threaded access via the value of 2192 the CKF_OS_LOCKING_OK flag in the flags field and the values of the CreateMutex, DestroyMutex, 2193 LockMutex, and UnlockMutex function pointer fields: 2194
1. If the flag isn’t set, and the function pointer fields aren’t supplied (i.e., they all have the value 2195 NULL_PTR), that means that the application won’t be accessing the Cryptoki library from multiple 2196 threads simultaneously. 2197
2. If the flag is set, and the function pointer fields aren’t supplied (i.e., they all have the value 2198 NULL_PTR), that means that the application will be performing multi-threaded Cryptoki access, and 2199 the library needs to use the native operating system primitives to ensure safe multi-threaded access. 2200 If the library is unable to do this, C_Initialize should return with the value CKR_CANT_LOCK. 2201
3. If the flag isn’t set, and the function pointer fields are supplied (i.e., they all have non-NULL_PTR 2202 values), that means that the application will be performing multi-threaded Cryptoki access, and the 2203 library needs to use the supplied function pointers for mutex-handling to ensure safe multi-threaded 2204 access. If the library is unable to do this, C_Initialize should return with the value 2205 CKR_CANT_LOCK. 2206
4. If the flag is set, and the function pointer fields are supplied (i.e., they all have non-NULL_PTR 2207 values), that means that the application will be performing multi-threaded Cryptoki access, and the 2208 library needs to use either the native operating system primitives or the supplied function pointers for 2209 mutex-handling to ensure safe multi-threaded access. If the library is unable to do this, C_Initialize 2210 should return with the value CKR_CANT_LOCK. 2211
If some, but not all, of the supplied function pointers to C_Initialize are non-NULL_PTR, then C_Initialize 2212 should return with the value CKR_ARGUMENTS_BAD. 2213
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 76 of 168
A call to C_Initialize with pInitArgs set to NULL_PTR is treated like a call to C_Initialize with pInitArgs 2214 pointing to a CK_C_INITIALIZE_ARGS which has the CreateMutex, DestroyMutex, LockMutex, 2215 UnlockMutex, and pReserved fields set to NULL_PTR, and has the flags field set to 0. 2216
C_Initialize should be the first Cryptoki call made by an application, except for calls to 2217 C_GetFunctionList, C_GetInterfaceList, or C_GetInterface. What this function actually does is 2218 implementation-dependent; typically, it might cause Cryptoki to initialize its internal memory buffers, or 2219 any other resources it requires. 2220
If several applications are using Cryptoki, each one should call C_Initialize. Every call to C_Initialize 2221 should (eventually) be succeeded by a single call to C_Finalize. See [PKCS11-UG] for further details. 2222
Return values: CKR_ARGUMENTS_BAD, CKR_CANT_LOCK, 2223 CKR_CRYPTOKI_ALREADY_INITIALIZED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2224 CKR_HOST_MEMORY, CKR_NEED_TO_CREATE_THREADS, CKR_OK. 2225
Example: see C_GetInfo. 2226
5.4.2 C_Finalize 2227
CK_DECLARE_FUNCTION(CK_RV, C_Finalize)( 2228
CK_VOID_PTR pReserved 2229
); 2230
C_Finalize is called to indicate that an application is finished with the Cryptoki library. It should be the 2231 last Cryptoki call made by an application. The pReserved parameter is reserved for future versions; for 2232 this version, it should be set to NULL_PTR (if C_Finalize is called with a non-NULL_PTR value for 2233 pReserved, it should return the value CKR_ARGUMENTS_BAD. 2234
If several applications are using Cryptoki, each one should call C_Finalize. Each application’s call to 2235 C_Finalize should be preceded by a single call to C_Initialize; in between the two calls, an application 2236 can make calls to other Cryptoki functions. See [PKCS11-UG] for further details. 2237
Despite the fact that the parameters supplied to C_Initialize can in general allow for safe multi-threaded 2238 access to a Cryptoki library, the behavior of C_Finalize is nevertheless undefined if it is called by an 2239 application while other threads of the application are making Cryptoki calls. The exception to this 2240 exceptional behavior of C_Finalize occurs when a thread calls C_Finalize while another of the 2241 application’s threads is blocking on Cryptoki’s C_WaitForSlotEvent function. When this happens, the 2242 blocked thread becomes unblocked and returns the value CKR_CRYPTOKI_NOT_INITIALIZED. See 2243 C_WaitForSlotEvent for more information. 2244
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 2245 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK. 2246
Example: see C_GetInfo. 2247
5.4.3 C_GetInfo 2248
CK_DECLARE_FUNCTION(CK_RV, C_GetInfo)( 2249
CK_INFO_PTR pInfo 2250
); 2251
C_GetInfo returns general information about Cryptoki. pInfo points to the location that receives the 2252 information. 2253
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 2254 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK. 2255
Example: 2256
CK_INFO info; 2257
CK_RV rv; 2258
CK_C_INITIALIZE_ARGS InitArgs; 2259
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 77 of 168
2260
InitArgs.CreateMutex = &MyCreateMutex; 2261
InitArgs.DestroyMutex = &MyDestroyMutex; 2262
InitArgs.LockMutex = &MyLockMutex; 2263
InitArgs.UnlockMutex = &MyUnlockMutex; 2264
InitArgs.flags = CKF_OS_LOCKING_OK; 2265
InitArgs.pReserved = NULL_PTR; 2266
2267
rv = C_Initialize((CK_VOID_PTR)&InitArgs); 2268
assert(rv == CKR_OK); 2269
2270
rv = C_GetInfo(&info); 2271
assert(rv == CKR_OK); 2272
if(info.cryptokiVersion.major == 2) { 2273
/* Do lots of interesting cryptographic things with the token */ 2274
. 2275
. 2276
} 2277
2278
rv = C_Finalize(NULL_PTR); 2279
assert(rv == CKR_OK); 2280
5.4.4 C_GetFunctionList 2281
CK_DECLARE_FUNCTION(CK_RV, C_GetFunctionList)( 2282
CK_FUNCTION_LIST_PTR_PTR ppFunctionList 2283
); 2284
C_GetFunctionList obtains a pointer to the Cryptoki library’s list of function pointers. ppFunctionList 2285 points to a value which will receive a pointer to the library’s CK_FUNCTION_LIST structure, which in turn 2286 contains function pointers for all the Cryptoki API routines in the library. The pointer thus obtained may 2287 point into memory which is owned by the Cryptoki library, and which may or may not be writable. 2288 Whether or not this is the case, no attempt should be made to write to this memory. 2289
C_GetFunctionList, C_GetInterfaceList, and C_GetInterface are the only Cryptoki functions which an 2290 application may call before calling C_Initialize. It is provided to make it easier and faster for applications 2291 to use shared Cryptoki libraries and to use more than one Cryptoki library simultaneously. 2292
Return values: CKR_ARGUMENTS_BAD, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2293 CKR_HOST_MEMORY, CKR_OK. 2294
Example: 2295
CK_FUNCTION_LIST_PTR pFunctionList; 2296
CK_C_Initialize pC_Initialize; 2297
CK_RV rv; 2298
2299
/* It’s OK to call C_GetFunctionList before calling C_Initialize */ 2300
rv = C_GetFunctionList(&pFunctionList); 2301
assert(rv == CKR_OK); 2302
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 78 of 168
pC_Initialize = pFunctionList -> C_Initialize; 2303
2304
/* Call the C_Initialize function in the library */ 2305
rv = (*pC_Initialize)(NULL_PTR); 2306
5.4.5 C_GetInterfaceList 2307
CK_DECLARE_FUNCTION(CK_RV, C_GetInterfaceList)( 2308
CK_INTERFACE_PTR pInterfaceList, 2309
CK_ULONG_PTR pulCount 2310
); 2311
C_GetInterfaceList is used to obtain a list of interfaces supported by a Cryptoki library. pulCount points 2312 to the location that receives the number of interfaces. 2313
There are two ways for an application to call C_GetInterfaceList: 2314
1. If pInterfaceList is NULL_PTR, then all that C_GetInterfaceList does is return (in *pulCount) the 2315 number of interfaces, without actually returning a list of interfaces. The contents of *pulCount on 2316 entry to C_GetInterfaceList has no meaning in this case, and the call returns the value CKR_OK. 2317
2. If pIntrerfaceList is not NULL_PTR, then *pulCount MUST contain the size (in terms of 2318 CK_INTERFACE elements) of the buffer pointed to by pInterfaceList. If that buffer is large enough to 2319 hold the list of interfaces, then the list is returned in it, and CKR_OK is returned. If not, then the call 2320 to C_GetInterfaceList returns the value CKR_BUFFER_TOO_SMALL. In either case, the value 2321 *pulCount is set to hold the number of interfaces. 2322
Because C_GetInterfaceList does not allocate any space of its own, an application will often call 2323 C_GetInterfaceList twice. However, this behavior is by no means required. 2324
C_GetInterfaceList obtains (in *pFunctionList of each interface) a pointer to the Cryptoki library’s list of 2325 function pointers. The pointer thus obtained may point into memory which is owned by the Cryptoki 2326 library, and which may or may not be writable. Whether or not this is the case, no attempt should be 2327 made to write to this memory. The same caveat applies to the interface names returned. 2328
2329
C_GetFunctionList, C_GetInterfaceList, and C_GetInterface are the only Cryptoki functions which an 2330 application may call before calling C_Initialize. It is provided to make it easier and faster for applications 2331 to use shared Cryptoki libraries and to use more than one Cryptoki library simultaneously. 2332
Return values: CKR_BUFFER_TOO_SMALL, CKR_ARGUMENTS_BAD, CKR_FUNCTION_FAILED, 2333 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK. 2334
Example: 2335
CK_ULONG ulCount=0; 2336
CK_INTERFACE_PTR interfaceList=NULL; 2337
CK_RV rv; 2338
int I; 2339
2340
/* get number of interfaces */ 2341
rv = C_GetInterfaceList(NULL,&ulCount); 2342
if (rv == CKR_OK) { 2343
/* get copy of interfaces */ 2344
interfaceList = (CK_INTERFACE_PTR)malloc(ulCount*sizeof(CK_INTERFACE)); 2345
rv = C_GetInterfaceList(interfaceList,&ulCount); 2346
for(i=0;i<ulCount;i++) { 2347
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 79 of 168
printf("interface %s version %d.%d funcs %p flags 0x%lu\n", 2348
interfaceList[i].pInterfaceName, 2349
((CK_VERSION *)interfaceList[i].pFunctionList)->major, 2350
((CK_VERSION *)interfaceList[i].pFunctionList)->minor, 2351
interfaceList[i].pFunctionList, 2352
interfaceList[i].flags); 2353
} 2354
} 2355
2356
5.4.6 C_GetInterface 2357
CK_DECLARE_FUNCTION(CK_RV,C_GetInterface)( 2358
CK_UTF8CHAR_PTR pInterfaceName, 2359
CK_VERSION_PTR pVersion, 2360
CK_INTERFACE_PTR_PTR ppInterface, 2361
CK_FLAGS flags 2362
); 2363
C_GetInterface is used to obtain an interface supported by a Cryptoki library. pInterfaceName specifies 2364 the name of the interface, pVersion specifies the interface version, ppInterface points to the location that 2365 receives the interface, flags specifies the required interface flags. 2366
There are multiple ways for an application to specify a particular interface when calling C_GetInterface: 2367
1. If pInterfaceName is not NULL_PTR, the name of the interface returned must match. If 2368 pInterfaceName is NULL_PTR, the cryptoki library can return a default interface of its choice 2369
2. If pVersion is not NULL_PTR, the version of the interface returned must match. If pVersion is 2370 NULL_PTR, the cryptoki library can return an interface of any version 2371
3. If flags is non-zero, the interface returned must match all of the supplied flag values (but may include 2372 additional flags not specified). If flags is 0, the cryptoki library can return an interface with any flags 2373
C_GetInterface obtains (in *pFunctionList of each interface) a pointer to the Cryptoki library’s list of 2374 function pointers. The pointer thus obtained may point into memory which is owned by the Cryptoki 2375 library, and which may or may not be writable. Whether or not this is the case, no attempt should be 2376 made to write to this memory. The same caveat applies to the interface names returned. 2377
C_GetFunctionList, C_GetInterfaceList, and C_GetInterface are the only Cryptoki functions which an 2378 application may call before calling C_Initialize. It is provided to make it easier and faster for applications 2379 to use shared Cryptoki libraries and to use more than one Cryptoki library simultaneously. 2380
Return values: CKR_BUFFER_TOO_SMALL, CKR_ARGUMENTS_BAD, CKR_FUNCTION_FAILED, 2381 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK. 2382
Example: 2383
CK_INTERFACE_PTR interface; 2384
CK_RV rv; 2385
CK_VERSION version; 2386
CK_FLAGS flags=CKF_ INTERFACE_FORK_SAFE; 2387
2388
/* get default interface */ 2389
rv = C_GetInterface(NULL,NULL,&interface,flags); 2390
if (rv == CKR_OK) { 2391
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 80 of 168
printf("interface %s version %d.%d funcs %p flags 0x%lu\n", 2392
interface->pInterfaceName, 2393
((CK_VERSION *)interface->pFunctionList)->major, 2394
((CK_VERSION *)interface->pFunctionList)->minor, 2395
interface->pFunctionList, 2396
interface->flags); 2397
} 2398
2399
/* get default standard interface */ 2400
rv = C_GetInterface((CK_UTF8CHAR_PTR)"PKCS 11",NULL,&interface,flags); 2401
if (rv == CKR_OK) { 2402
printf("interface %s version %d.%d funcs %p flags 0x%lu\n", 2403
interface->pInterfaceName, 2404
((CK_VERSION *)interface->pFunctionList)->major, 2405
((CK_VERSION *)interface->pFunctionList)->minor, 2406
interface->pFunctionList, 2407
interface->flags); 2408
} 2409
2410
/* get specific standard version interface */ 2411
version.major=3; 2412
version.minor=0; 2413
rv = C_GetInterface((CK_UTF8CHAR_PTR)"PKCS 11",&version,&interface,flags); 2414
if (rv == CKR_OK) { 2415
CK_FUNCTION_LIST_3_0_PTR pkcs11=interface->pFunctionList; 2416
2417
/* ... use the new functions */ 2418
pkcs11->C_LoginUser(hSession,userType,pPin,ulPinLen, 2419 pUsername,ulUsernameLen); 2420
} 2421
2422
/* get specific vendor version interface */ 2423
version.major=1; 2424
version.minor=0; 2425
rv = C_GetInterface((CK_UTF8CHAR_PTR) 2426
"Vendor VendorName",&version,&interface,flags); 2427
if (rv == CKR_OK) { 2428
CK_FUNCTION_LIST_VENDOR_1_0_PTR pkcs11=interface->pFunctionList; 2429
2430
/* ... use vendor specific functions */ 2431
pkcs11->C_VendorFunction1(param1,param2,param3); 2432
} 2433
2434
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 81 of 168
5.5 Slot and token management functions 2435
Cryptoki provides the following functions for slot and token management: 2436
5.5.1 C_GetSlotList 2437
CK_DECLARE_FUNCTION(CK_RV, C_GetSlotList)( 2438
CK_BBOOL tokenPresent, 2439
CK_SLOT_ID_PTR pSlotList, 2440
CK_ULONG_PTR pulCount 2441
); 2442
C_GetSlotList is used to obtain a list of slots in the system. tokenPresent indicates whether the list 2443 obtained includes only those slots with a token present (CK_TRUE), or all slots (CK_FALSE); pulCount 2444 points to the location that receives the number of slots. 2445
There are two ways for an application to call C_GetSlotList: 2446
1. If pSlotList is NULL_PTR, then all that C_GetSlotList does is return (in *pulCount) the number of 2447 slots, without actually returning a list of slots. The contents of the buffer pointed to by pulCount on 2448 entry to C_GetSlotList has no meaning in this case, and the call returns the value CKR_OK. 2449
2. If pSlotList is not NULL_PTR, then *pulCount MUST contain the size (in terms of CK_SLOT_ID 2450 elements) of the buffer pointed to by pSlotList. If that buffer is large enough to hold the list of slots, 2451 then the list is returned in it, and CKR_OK is returned. If not, then the call to C_GetSlotList returns 2452 the value CKR_BUFFER_TOO_SMALL. In either case, the value *pulCount is set to hold the number 2453 of slots. 2454
Because C_GetSlotList does not allocate any space of its own, an application will often call 2455 C_GetSlotList twice (or sometimes even more times—if an application is trying to get a list of all slots 2456 with a token present, then the number of such slots can (unfortunately) change between when the 2457 application asks for how many such slots there are and when the application asks for the slots 2458 themselves). However, multiple calls to C_GetSlotList are by no means required. 2459
All slots which C_GetSlotList reports MUST be able to be queried as valid slots by C_GetSlotInfo. 2460 Furthermore, the set of slots accessible through a Cryptoki library is checked at the time that 2461 C_GetSlotList, for list length prediction (NULL pSlotList argument) is called. If an application calls 2462 C_GetSlotList with a non-NULL pSlotList, and then the user adds or removes a hardware device, the 2463 changed slot list will only be visible and effective if C_GetSlotList is called again with NULL. Even if C_ 2464 GetSlotList is successfully called this way, it may or may not be the case that the changed slot list will be 2465 successfully recognized depending on the library implementation. On some platforms, or earlier PKCS11 2466 compliant libraries, it may be necessary to successfully call C_Initialize or to restart the entire system. 2467
2468
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 2469 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2470 CKR_HOST_MEMORY, CKR_OK. 2471
Example: 2472
CK_ULONG ulSlotCount, ulSlotWithTokenCount; 2473
CK_SLOT_ID_PTR pSlotList, pSlotWithTokenList; 2474
CK_RV rv; 2475
2476
/* Get list of all slots */ 2477
rv = C_GetSlotList(CK_FALSE, NULL_PTR, &ulSlotCount); 2478
if (rv == CKR_OK) { 2479
pSlotList = 2480
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 82 of 168
(CK_SLOT_ID_PTR) malloc(ulSlotCount*sizeof(CK_SLOT_ID)); 2481
rv = C_GetSlotList(CK_FALSE, pSlotList, &ulSlotCount); 2482
if (rv == CKR_OK) { 2483
/* Now use that list of all slots */ 2484
. 2485
. 2486
} 2487
2488
free(pSlotList); 2489
} 2490
2491
/* Get list of all slots with a token present */ 2492
pSlotWithTokenList = (CK_SLOT_ID_PTR) malloc(0); 2493
ulSlotWithTokenCount = 0; 2494
while (1) { 2495
rv = C_GetSlotList( 2496
CK_TRUE, pSlotWithTokenList, &ulSlotWithTokenCount); 2497
if (rv != CKR_BUFFER_TOO_SMALL) 2498
break; 2499
pSlotWithTokenList = realloc( 2500
pSlotWithTokenList, 2501
ulSlotWithTokenList*sizeof(CK_SLOT_ID)); 2502
} 2503
2504
if (rv == CKR_OK) { 2505
/* Now use that list of all slots with a token present */ 2506
. 2507
. 2508
} 2509
2510
free(pSlotWithTokenList); 2511
5.5.2 C_GetSlotInfo 2512
CK_DECLARE_FUNCTION(CK_RV, C_GetSlotInfo)( 2513
CK_SLOT_ID slotID, 2514
CK_SLOT_INFO_PTR pInfo 2515
); 2516
C_GetSlotInfo obtains information about a particular slot in the system. slotID is the ID of the slot; pInfo 2517 points to the location that receives the slot information. 2518
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 2519 CKR_DEVICE_ERROR, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, 2520 CKR_OK, CKR_SLOT_ID_INVALID. 2521
Example: see C_GetTokenInfo. 2522
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 83 of 168
5.5.3 C_GetTokenInfo 2523
CK_DECLARE_FUNCTION(CK_RV, C_GetTokenInfo)( 2524
CK_SLOT_ID slotID, 2525
CK_TOKEN_INFO_PTR pInfo 2526
); 2527
C_GetTokenInfo obtains information about a particular token in the system. slotID is the ID of the 2528 token’s slot; pInfo points to the location that receives the token information. 2529
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2530 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2531 CKR_HOST_MEMORY, CKR_OK, CKR_SLOT_ID_INVALID, CKR_TOKEN_NOT_PRESENT, 2532 CKR_TOKEN_NOT_RECOGNIZED, CKR_ARGUMENTS_BAD. 2533
Example: 2534
CK_ULONG ulCount; 2535
CK_SLOT_ID_PTR pSlotList; 2536
CK_SLOT_INFO slotInfo; 2537
CK_TOKEN_INFO tokenInfo; 2538
CK_RV rv; 2539
2540
rv = C_GetSlotList(CK_FALSE, NULL_PTR, &ulCount); 2541
if ((rv == CKR_OK) && (ulCount > 0)) { 2542
pSlotList = (CK_SLOT_ID_PTR) malloc(ulCount*sizeof(CK_SLOT_ID)); 2543
rv = C_GetSlotList(CK_FALSE, pSlotList, &ulCount); 2544
assert(rv == CKR_OK); 2545
2546
/* Get slot information for first slot */ 2547
rv = C_GetSlotInfo(pSlotList[0], &slotInfo); 2548
assert(rv == CKR_OK); 2549
2550
/* Get token information for first slot */ 2551
rv = C_GetTokenInfo(pSlotList[0], &tokenInfo); 2552
if (rv == CKR_TOKEN_NOT_PRESENT) { 2553
. 2554
. 2555
} 2556
. 2557
. 2558
free(pSlotList); 2559
} 2560
5.5.4 C_WaitForSlotEvent 2561
CK_DECLARE_FUNCTION(CK_RV, C_WaitForSlotEvent)( 2562
CK_FLAGS flags, 2563
CK_SLOT_ID_PTR pSlot, 2564
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 84 of 168
CK_VOID_PTR pReserved 2565
); 2566
C_WaitForSlotEvent waits for a slot event, such as token insertion or token removal, to occur. flags 2567 determines whether or not the C_WaitForSlotEvent call blocks (i.e., waits for a slot event to occur); pSlot 2568 points to a location which will receive the ID of the slot that the event occurred in. pReserved is reserved 2569 for future versions; for this version of Cryptoki, it should be NULL_PTR. 2570
At present, the only flag defined for use in the flags argument is CKF_DONT_BLOCK: 2571
Internally, each Cryptoki application has a flag for each slot which is used to track whether or not any 2572 unrecognized events involving that slot have occurred. When an application initially calls C_Initialize, 2573 every slot’s event flag is cleared. Whenever a slot event occurs, the flag corresponding to the slot in 2574 which the event occurred is set. 2575
If C_WaitForSlotEvent is called with the CKF_DONT_BLOCK flag set in the flags argument, and some 2576 slot’s event flag is set, then that event flag is cleared, and the call returns with the ID of that slot in the 2577 location pointed to by pSlot. If more than one slot’s event flag is set at the time of the call, one such slot 2578 is chosen by the library to have its event flag cleared and to have its slot ID returned. 2579
If C_WaitForSlotEvent is called with the CKF_DONT_BLOCK flag set in the flags argument, and no 2580 slot’s event flag is set, then the call returns with the value CKR_NO_EVENT. In this case, the contents of 2581 the location pointed to by pSlot when C_WaitForSlotEvent are undefined. 2582
If C_WaitForSlotEvent is called with the CKF_DONT_BLOCK flag clear in the flags argument, then the 2583 call behaves as above, except that it will block. That is, if no slot’s event flag is set at the time of the call, 2584 C_WaitForSlotEvent will wait until some slot’s event flag becomes set. If a thread of an application has 2585 a C_WaitForSlotEvent call blocking when another thread of that application calls C_Finalize, the 2586 C_WaitForSlotEvent call returns with the value CKR_CRYPTOKI_NOT_INITIALIZED. 2587
Although the parameters supplied to C_Initialize can in general allow for safe multi-threaded access to a 2588 Cryptoki library, C_WaitForSlotEvent is exceptional in that the behavior of Cryptoki is undefined if 2589 multiple threads of a single application make simultaneous calls to C_WaitForSlotEvent. 2590
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 2591 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_NO_EVENT, 2592 CKR_OK. 2593
Example: 2594
CK_FLAGS flags = 0; 2595
CK_SLOT_ID slotID; 2596
CK_SLOT_INFO slotInfo; 2597
CK_RV rv; 2598
. 2599
. 2600
/* Block and wait for a slot event */ 2601
rv = C_WaitForSlotEvent(flags, &slotID, NULL_PTR); 2602
assert(rv == CKR_OK); 2603
2604
/* See what’s up with that slot */ 2605
rv = C_GetSlotInfo(slotID, &slotInfo); 2606
assert(rv == CKR_OK); 2607
2608
5.5.5 C_GetMechanismList 2609
CK_DECLARE_FUNCTION(CK_RV, C_GetMechanismList)( 2610
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 85 of 168
CK_SLOT_ID slotID, 2611
CK_MECHANISM_TYPE_PTR pMechanismList, 2612
CK_ULONG_PTR pulCount 2613
); 2614
C_GetMechanismList is used to obtain a list of mechanism types supported by a token. SlotID is the ID 2615 of the token’s slot; pulCount points to the location that receives the number of mechanisms. 2616
There are two ways for an application to call C_GetMechanismList: 2617
1. If pMechanismList is NULL_PTR, then all that C_GetMechanismList does is return (in *pulCount) 2618 the number of mechanisms, without actually returning a list of mechanisms. The contents of 2619 *pulCount on entry to C_GetMechanismList has no meaning in this case, and the call returns the 2620 value CKR_OK. 2621
2. If pMechanismList is not NULL_PTR, then *pulCount MUST contain the size (in terms of 2622 CK_MECHANISM_TYPE elements) of the buffer pointed to by pMechanismList. If that buffer is large 2623 enough to hold the list of mechanisms, then the list is returned in it, and CKR_OK is returned. If not, 2624 then the call to C_GetMechanismList returns the value CKR_BUFFER_TOO_SMALL. In either 2625 case, the value *pulCount is set to hold the number of mechanisms. 2626
Because C_GetMechanismList does not allocate any space of its own, an application will often call 2627 C_GetMechanismList twice. However, this behavior is by no means required. 2628
Return values: CKR_BUFFER_TOO_SMALL, CKR_CRYPTOKI_NOT_INITIALIZED, 2629 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 2630 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 2631 CKR_SLOT_ID_INVALID, CKR_TOKEN_NOT_PRESENT, CKR_TOKEN_NOT_RECOGNIZED, 2632 CKR_ARGUMENTS_BAD. 2633
Example: 2634
CK_SLOT_ID slotID; 2635
CK_ULONG ulCount; 2636
CK_MECHANISM_TYPE_PTR pMechanismList; 2637
CK_RV rv; 2638
2639
. 2640
. 2641
rv = C_GetMechanismList(slotID, NULL_PTR, &ulCount); 2642
if ((rv == CKR_OK) && (ulCount > 0)) { 2643
pMechanismList = 2644
(CK_MECHANISM_TYPE_PTR) 2645
malloc(ulCount*sizeof(CK_MECHANISM_TYPE)); 2646
rv = C_GetMechanismList(slotID, pMechanismList, &ulCount); 2647
if (rv == CKR_OK) { 2648
. 2649
. 2650
} 2651
free(pMechanismList); 2652
} 2653
5.5.6 C_GetMechanismInfo 2654
CK_DECLARE_FUNCTION(CK_RV, C_GetMechanismInfo)( 2655
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 86 of 168
CK_SLOT_ID slotID, 2656
CK_MECHANISM_TYPE type, 2657
CK_MECHANISM_INFO_PTR pInfo 2658
); 2659
C_GetMechanismInfo obtains information about a particular mechanism possibly supported by a token. 2660 slotID is the ID of the token’s slot; type is the type of mechanism; pInfo points to the location that receives 2661 the mechanism information. 2662
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2663 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2664 CKR_HOST_MEMORY, CKR_MECHANISM_INVALID, CKR_OK, CKR_SLOT_ID_INVALID, 2665 CKR_TOKEN_NOT_PRESENT, CKR_TOKEN_NOT_RECOGNIZED, CKR_ARGUMENTS_BAD. 2666
Example: 2667
CK_SLOT_ID slotID; 2668
CK_MECHANISM_INFO info; 2669
CK_RV rv; 2670
2671
. 2672
. 2673
/* Get information about the CKM_MD2 mechanism for this token */ 2674
rv = C_GetMechanismInfo(slotID, CKM_MD2, &info); 2675
if (rv == CKR_OK) { 2676
if (info.flags & CKF_DIGEST) { 2677
. 2678
. 2679
} 2680
} 2681
5.5.7 C_InitToken 2682
CK_DECLARE_FUNCTION(CK_RV, C_InitToken)( 2683
CK_SLOT_ID slotID, 2684
CK_UTF8CHAR_PTR pPin, 2685
CK_ULONG ulPinLen, 2686
CK_UTF8CHAR_PTR pLabel 2687
); 2688
C_InitToken initializes a token. slotID is the ID of the token’s slot; pPin points to the SO’s initial PIN 2689 (which need not be null-terminated); ulPinLen is the length in bytes of the PIN; pLabel points to the 32-2690 byte label of the token (which MUST be padded with blank characters, and which MUST not be null-2691 terminated). This standard allows PIN values to contain any valid UTF8 character, but the token may 2692 impose subset restrictions. 2693
If the token has not been initialized (i.e. new from the factory), then the pPin parameter becomes the 2694 initial value of the SO PIN. If the token is being reinitialized, the pPin parameter is checked against the 2695 existing SO PIN to authorize the initialization operation. In both cases, the SO PIN is the value pPin after 2696 the function completes successfully. If the SO PIN is lost, then the card MUST be reinitialized using a 2697 mechanism outside the scope of this standard. The CKF_TOKEN_INITIALIZED flag in the 2698 CK_TOKEN_INFO structure indicates the action that will result from calling C_InitToken. If set, the token 2699 will be reinitialized, and the client MUST supply the existing SO password in pPin. 2700
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 87 of 168
When a token is initialized, all objects that can be destroyed are destroyed (i.e., all except for 2701 “indestructible” objects such as keys built into the token). Also, access by the normal user is disabled 2702 until the SO sets the normal user’s PIN. Depending on the token, some “default” objects may be created, 2703 and attributes of some objects may be set to default values. 2704
If the token has a “protected authentication path”, as indicated by the 2705 CKF_PROTECTED_AUTHENTICATION_PATH flag in its CK_TOKEN_INFO being set, then that means 2706 that there is some way for a user to be authenticated to the token without having the application send a 2707 PIN through the Cryptoki library. One such possibility is that the user enters a PIN on a PINpad on the 2708 token itself, or on the slot device. To initialize a token with such a protected authentication path, the pPin 2709 parameter to C_InitToken should be NULL_PTR. During the execution of C_InitToken, the SO’s PIN will 2710 be entered through the protected authentication path. 2711
If the token has a protected authentication path other than a PINpad, then it is token-dependent whether 2712 or not C_InitToken can be used to initialize the token. 2713
A token cannot be initialized if Cryptoki detects that any application has an open session with it; when a 2714 call to C_InitToken is made under such circumstances, the call fails with error CKR_SESSION_EXISTS. 2715 Unfortunately, it may happen when C_InitToken is called that some other application does have an open 2716 session with the token, but Cryptoki cannot detect this, because it cannot detect anything about other 2717 applications using the token. If this is the case, then the consequences of the C_InitToken call are 2718 undefined. 2719
The C_InitToken function may not be sufficient to properly initialize complex tokens. In these situations, 2720 an initialization mechanism outside the scope of Cryptoki MUST be employed. The definition of “complex 2721 token” is product specific. 2722
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2723 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 2724 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_PIN_INCORRECT, 2725 CKR_PIN_LOCKED, CKR_SESSION_EXISTS, CKR_SLOT_ID_INVALID, 2726 CKR_TOKEN_NOT_PRESENT, CKR_TOKEN_NOT_RECOGNIZED, 2727 CKR_TOKEN_WRITE_PROTECTED, CKR_ARGUMENTS_BAD. 2728
Example: 2729
CK_SLOT_ID slotID; 2730
CK_UTF8CHAR pin[] = {“MyPIN”}; 2731
CK_UTF8CHAR label[32]; 2732
CK_RV rv; 2733
2734
. 2735
. 2736
memset(label, ‘ ’, sizeof(label)); 2737
memcpy(label, “My first token”, strlen(“My first token”)); 2738
rv = C_InitToken(slotID, pin, strlen(pin), label); 2739
if (rv == CKR_OK) { 2740
. 2741
. 2742
} 2743
5.5.8 C_InitPIN 2744
CK_DECLARE_FUNCTION(CK_RV, C_InitPIN)( 2745 CK_SESSION_HANDLE hSession, 2746 CK_UTF8CHAR_PTR pPin, 2747
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 88 of 168
CK_ULONG ulPinLen 2748 ); 2749
C_InitPIN initializes the normal user’s PIN. hSession is the session’s handle; pPin points to the normal 2750 user’s PIN; ulPinLen is the length in bytes of the PIN. This standard allows PIN values to contain any 2751 valid UTF8 character, but the token may impose subset restrictions. 2752
C_InitPIN can only be called in the “R/W SO Functions” state. An attempt to call it from a session in any 2753 other state fails with error CKR_USER_NOT_LOGGED_IN. 2754
If the token has a “protected authentication path”, as indicated by the 2755 CKF_PROTECTED_AUTHENTICATION_PATH flag in its CK_TOKEN_INFO being set, then that means 2756 that there is some way for a user to be authenticated to the token without having to send a PIN through 2757 the Cryptoki library. One such possibility is that the user enters a PIN on a PIN pad on the token itself, or 2758 on the slot device. To initialize the normal user’s PIN on a token with such a protected authentication 2759 path, the pPin parameter to C_InitPIN should be NULL_PTR. During the execution of C_InitPIN, the SO 2760 will enter the new PIN through the protected authentication path. 2761
If the token has a protected authentication path other than a PIN pad, then it is token-dependent whether 2762 or not C_InitPIN can be used to initialize the normal user’s token access. 2763
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2764 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 2765 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_PIN_INVALID, 2766 CKR_PIN_LEN_RANGE, CKR_SESSION_CLOSED, CKR_SESSION_READ_ONLY, 2767 CKR_SESSION_HANDLE_INVALID, CKR_TOKEN_WRITE_PROTECTED, 2768 CKR_USER_NOT_LOGGED_IN, CKR_ARGUMENTS_BAD. 2769
Example: 2770
CK_SESSION_HANDLE hSession; 2771
CK_UTF8CHAR newPin[]= {“NewPIN”}; 2772
CK_RV rv; 2773
2774
rv = C_InitPIN(hSession, newPin, sizeof(newPin)-1); 2775
if (rv == CKR_OK) { 2776
. 2777
. 2778
} 2779
5.5.9 C_SetPIN 2780
CK_DECLARE_FUNCTION(CK_RV, C_SetPIN)( 2781 CK_SESSION_HANDLE hSession, 2782 CK_UTF8CHAR_PTR pOldPin, 2783 CK_ULONG ulOldLen, 2784 CK_UTF8CHAR_PTR pNewPin, 2785 CK_ULONG ulNewLen 2786 ); 2787
C_SetPIN modifies the PIN of the user that is currently logged in, or the CKU_USER PIN if the session is 2788 not logged in. hSession is the session’s handle; pOldPin points to the old PIN; ulOldLen is the length in 2789 bytes of the old PIN; pNewPin points to the new PIN; ulNewLen is the length in bytes of the new PIN. This 2790 standard allows PIN values to contain any valid UTF8 character, but the token may impose subset 2791 restrictions. 2792
C_SetPIN can only be called in the “R/W Public Session” state, “R/W SO Functions” state, or “R/W User 2793 Functions” state. An attempt to call it from a session in any other state fails with error 2794 CKR_SESSION_READ_ONLY. 2795
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 89 of 168
If the token has a “protected authentication path”, as indicated by the 2796 CKF_PROTECTED_AUTHENTICATION_PATH flag in its CK_TOKEN_INFO being set, then that means 2797 that there is some way for a user to be authenticated to the token without having to send a PIN through 2798 the Cryptoki library. One such possibility is that the user enters a PIN on a PIN pad on the token itself, or 2799 on the slot device. To modify the current user’s PIN on a token with such a protected authentication path, 2800 the pOldPin and pNewPin parameters to C_SetPIN should be NULL_PTR. During the execution of 2801 C_SetPIN, the current user will enter the old PIN and the new PIN through the protected authentication 2802 path. It is not specified how the PIN pad should be used to enter two PINs; this varies. 2803
If the token has a protected authentication path other than a PIN pad, then it is token-dependent whether 2804 or not C_SetPIN can be used to modify the current user’s PIN. 2805
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2806 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 2807 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_PIN_INCORRECT, 2808 CKR_PIN_INVALID, CKR_PIN_LEN_RANGE, CKR_PIN_LOCKED, CKR_SESSION_CLOSED, 2809 CKR_SESSION_HANDLE_INVALID, CKR_SESSION_READ_ONLY, 2810 CKR_TOKEN_WRITE_PROTECTED, CKR_ARGUMENTS_BAD. 2811
Example: 2812
CK_SESSION_HANDLE hSession; 2813
CK_UTF8CHAR oldPin[] = {“OldPIN”}; 2814
CK_UTF8CHAR newPin[] = {“NewPIN”}; 2815
CK_RV rv; 2816
2817
rv = C_SetPIN( 2818
hSession, oldPin, sizeof(oldPin)-1, newPin, sizeof(newPin)-1); 2819
if (rv == CKR_OK) { 2820
. 2821
. 2822
} 2823
5.6 Session management functions 2824
A typical application might perform the following series of steps to make use of a token (note that there 2825 are other reasonable sequences of events that an application might perform): 2826
1. Select a token. 2827
2. Make one or more calls to C_OpenSession to obtain one or more sessions with the token. 2828
3. Call C_Login to log the user into the token. Since all sessions an application has with a token have a 2829 shared login state, C_Login only needs to be called for one of the sessions. 2830
4. Perform cryptographic operations using the sessions with the token. 2831
5. Call C_CloseSession once for each session that the application has with the token, or call 2832 C_CloseAllSessions to close all the application’s sessions simultaneously. 2833
As has been observed, an application may have concurrent sessions with more than one token. It is also 2834 possible for a token to have concurrent sessions with more than one application. 2835
Cryptoki provides the following functions for session management: 2836
5.6.1 C_OpenSession 2837
CK_DECLARE_FUNCTION(CK_RV, C_OpenSession)( 2838 CK_SLOT_ID slotID, 2839 CK_FLAGS flags, 2840 CK_VOID_PTR pApplication, 2841
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 90 of 168
CK_NOTIFY Notify, 2842 CK_SESSION_HANDLE_PTR phSession 2843 ); 2844
C_OpenSession opens a session between an application and a token in a particular slot. slotID is the 2845 slot’s ID; flags indicates the type of session; pApplication is an application-defined pointer to be passed to 2846 the notification callback; Notify is the address of the notification callback function (see Section 5.21); 2847 phSession points to the location that receives the handle for the new session. 2848
When opening a session with C_OpenSession, the flags parameter consists of the logical OR of zero or 2849 more bit flags defined in the CK_SESSION_INFO data type. For legacy reasons, the 2850 CKF_SERIAL_SESSION bit MUST always be set; if a call to C_OpenSession does not have this bit set, 2851 the call should return unsuccessfully with the error code 2852 CKR_SESSION_PARALLEL_NOT_SUPPORTED. 2853
There may be a limit on the number of concurrent sessions an application may have with the token, which 2854 may depend on whether the session is “read-only” or “read/write”. An attempt to open a session which 2855 does not succeed because there are too many existing sessions of some type should return 2856 CKR_SESSION_COUNT. 2857
If the token is write-protected (as indicated in the CK_TOKEN_INFO structure), then only read-only 2858 sessions may be opened with it. 2859
If the application calling C_OpenSession already has a R/W SO session open with the token, then any 2860 attempt to open a R/O session with the token fails with error code 2861 CKR_SESSION_READ_WRITE_SO_EXISTS (see [PKCS11-UG] for further details). 2862
The Notify callback function is used by Cryptoki to notify the application of certain events. If the 2863 application does not wish to support callbacks, it should pass a value of NULL_PTR as the Notify 2864 parameter. See Section 5.21 for more information about application callbacks. 2865
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2866 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2867 CKR_HOST_MEMORY, CKR_OK, CKR_SESSION_COUNT, 2868 CKR_SESSION_PARALLEL_NOT_SUPPORTED, CKR_SESSION_READ_WRITE_SO_EXISTS, 2869 CKR_SLOT_ID_INVALID, CKR_TOKEN_NOT_PRESENT, CKR_TOKEN_NOT_RECOGNIZED, 2870 CKR_TOKEN_WRITE_PROTECTED, CKR_ARGUMENTS_BAD. 2871
Example: see C_CloseSession. 2872
5.6.2 C_CloseSession 2873
CK_DECLARE_FUNCTION(CK_RV, C_CloseSession)( 2874 CK_SESSION_HANDLE hSession 2875 ); 2876
C_CloseSession closes a session between an application and a token. hSession is the session’s 2877 handle. 2878
When a session is closed, all session objects created by the session are destroyed automatically, even if 2879 the application has other sessions “using” the objects (see [PKCS11-UG] for further details). 2880
If this function is successful and it closes the last session between the application and the token, the login 2881 state of the token for the application returns to public sessions. Any new sessions to the token opened by 2882 the application will be either R/O Public or R/W Public sessions. 2883
Depending on the token, when the last open session any application has with the token is closed, the 2884 token may be “ejected” from its reader (if this capability exists). 2885
Despite the fact this C_CloseSession is supposed to close a session, the return value 2886 CKR_SESSION_CLOSED is an error return. It actually indicates the (probably somewhat unlikely) event 2887 that while this function call was executing, another call was made to C_CloseSession to close this 2888 particular session, and that call finished executing first. Such uses of sessions are a bad idea, and 2889 Cryptoki makes little promise of what will occur in general if an application indulges in this sort of 2890 behavior. 2891
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 91 of 168
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2892 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2893 CKR_HOST_MEMORY, CKR_OK, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 2894
Example: 2895
CK_SLOT_ID slotID; 2896
CK_BYTE application; 2897
CK_NOTIFY MyNotify; 2898
CK_SESSION_HANDLE hSession; 2899
CK_RV rv; 2900
2901
. 2902
. 2903
application = 17; 2904
MyNotify = &EncryptionSessionCallback; 2905
rv = C_OpenSession( 2906
slotID, CKF_SERIAL_SESSION | CKF_RW_SESSION, 2907
(CK_VOID_PTR) &application, MyNotify, 2908
&hSession); 2909
if (rv == CKR_OK) { 2910
. 2911
. 2912
C_CloseSession(hSession); 2913
} 2914
5.6.3 C_CloseAllSessions 2915
CK_DECLARE_FUNCTION(CK_RV, C_CloseAllSessions)( 2916 CK_SLOT_ID slotID 2917 ); 2918
C_CloseAllSessions closes all sessions an application has with a token. slotID specifies the token’s slot. 2919
When a session is closed, all session objects created by the session are destroyed automatically. 2920
After successful execution of this function, the login state of the token for the application returns to public 2921 sessions. Any new sessions to the token opened by the application will be either R/O Public or R/W 2922 Public sessions. 2923
Depending on the token, when the last open session any application has with the token is closed, the 2924 token may be “ejected” from its reader (if this capability exists). 2925
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2926 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2927 CKR_HOST_MEMORY, CKR_OK, CKR_SLOT_ID_INVALID, CKR_TOKEN_NOT_PRESENT. 2928
Example: 2929
CK_SLOT_ID slotID; 2930
CK_RV rv; 2931
2932
. 2933
. 2934
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 92 of 168
rv = C_CloseAllSessions(slotID); 2935
5.6.4 C_GetSessionInfo 2936
CK_DECLARE_FUNCTION(CK_RV, C_GetSessionInfo)( 2937 CK_SESSION_HANDLE hSession, 2938 CK_SESSION_INFO_PTR pInfo 2939 ); 2940
C_GetSessionInfo obtains information about a session. hSession is the session’s handle; pInfo points to 2941 the location that receives the session information. 2942
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2943 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2944 CKR_HOST_MEMORY, CKR_OK, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 2945 CKR_ARGUMENTS_BAD. 2946
Example: 2947
CK_SESSION_HANDLE hSession; 2948
CK_SESSION_INFO info; 2949
CK_RV rv; 2950
2951
. 2952
. 2953
rv = C_GetSessionInfo(hSession, &info); 2954
if (rv == CKR_OK) { 2955
if (info.state == CKS_RW_USER_FUNCTIONS) { 2956
. 2957
. 2958
} 2959
. 2960
. 2961
} 2962
5.6.5 C_SessionCancel 2963
CK_DECLARE_FUNCTION(CK_RV, C_SessionCancel)( 2964 CK_SESSION_HANDLE hSession 2965 CK_FLAGS flags 2966 ); 2967
C_SessionCancel terminates active session based operations. hSession is the session’s handle; flags 2968 indicates the operations to cancel. 2969
To identify which operation(s) should be terminated, the flags parameter should be assigned the logical 2970 bitwise OR of one or more of the bit flags defined in the CK_MECHANISM_INFO structure. 2971
If no flags are set, the session state will not be modified and CKR_OK will be returned. 2972
If a flag is set for an operation that has not been initialized in the session, the operation flag will be 2973 ignored and C_SessionCancel will behave as if the operation flag was not set. 2974
If any of the operations indicated by the flags parameter cannot be cancelled, 2975 CKR_OPERATION_CANCEL_FAILED must be returned. If multiple operation flags were set and 2976 CKR_OPERATION_CANCEL_FAILED is returned, this function does not provide any information about 2977 which operation(s) could not be cancelled. If an application desires to know if any single operation could 2978 not be cancelled, the application should not call C_SessionCancel with multiple flags set. 2979
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 93 of 168
If C_SessionCancel is called from an application callback (see Section 5.16), no action will be taken by 2980 the library and CKR_FUNCTION_FAILED must be returned. 2981
If C_SessionCancel is used to cancel one half of a dual-function operation, the remaining operation 2982 should still be left in an active state. However, it is expected that some Cryptoki implementations may not 2983 support this and return CKR_OPERATION_CANCEL_FAILED unless flags for both operations are 2984 provided. 2985
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 2986 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 2987 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_CANCEL_FAILED, 2988 CKR_TOKEN_NOT_PRESENT. 2989
Example: 2990
CK_SESSION_HANDLE hSession; 2991
CK_RV rv; 2992
2993
rv = C_EncryptInit(hSession, &mechanism, hKey); 2994
if (rv != CKR_OK) 2995
{ 2996
. 2997
. 2998
} 2999
3000
rv = C_SessionCancel (hSession, CKF_ENCRYPT); 3001
if (rv != CKR_OK) 3002
{ 3003
. 3004
. 3005
} 3006
3007
rv = C_EncryptInit(hSession, &mechanism, hKey); 3008
if (rv != CKR_OK) 3009
{ 3010
. 3011
. 3012
} 3013
3014
3015 3016 3017 Below are modifications to existing API descriptions to allow an alternate method of cancelling individual 3018 operations. The additional text is highlighted. 3019
5.6.6 C_GetOperationState 3020
CK_DECLARE_FUNCTION(CK_RV, C_GetOperationState)( 3021 CK_SESSION_HANDLE hSession, 3022 CK_BYTE_PTR pOperationState, 3023
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 94 of 168
CK_ULONG_PTR pulOperationStateLen 3024 ); 3025
C_GetOperationState obtains a copy of the cryptographic operations state of a session, encoded as a 3026 string of bytes. hSession is the session’s handle; pOperationState points to the location that receives the 3027 state; pulOperationStateLen points to the location that receives the length in bytes of the state. 3028
Although the saved state output by C_GetOperationState is not really produced by a “cryptographic 3029 mechanism”, C_GetOperationState nonetheless uses the convention described in Section 5.2 on 3030 producing output. 3031
Precisely what the “cryptographic operations state” this function saves is varies from token to token; 3032 however, this state is what is provided as input to C_SetOperationState to restore the cryptographic 3033 activities of a session. 3034
Consider a session which is performing a message digest operation using SHA-1 (i.e., the session is 3035 using the CKM_SHA_1 mechanism). Suppose that the message digest operation was initialized 3036 properly, and that precisely 80 bytes of data have been supplied so far as input to SHA-1. The 3037 application now wants to “save the state” of this digest operation, so that it can continue it later. In this 3038 particular case, since SHA-1 processes 512 bits (64 bytes) of input at a time, the cryptographic 3039 operations state of the session most likely consists of three distinct parts: the state of SHA-1’s 160-bit 3040 internal chaining variable; the 16 bytes of unprocessed input data; and some administrative data 3041 indicating that this saved state comes from a session which was performing SHA-1 hashing. Taken 3042 together, these three pieces of information suffice to continue the current hashing operation at a later 3043 time. 3044
Consider next a session which is performing an encryption operation with DES (a block cipher with a 3045 block size of 64 bits) in CBC (cipher-block chaining) mode (i.e., the session is using the CKM_DES_CBC 3046 mechanism). Suppose that precisely 22 bytes of data (in addition to an IV for the CBC mode) have been 3047 supplied so far as input to DES, which means that the first two 8-byte blocks of ciphertext have already 3048 been produced and output. In this case, the cryptographic operations state of the session most likely 3049 consists of three or four distinct parts: the second 8-byte block of ciphertext (this will be used for cipher-3050 block chaining to produce the next block of ciphertext); the 6 bytes of data still awaiting encryption; some 3051 administrative data indicating that this saved state comes from a session which was performing DES 3052 encryption in CBC mode; and possibly the DES key being used for encryption (see C_SetOperationState 3053 for more information on whether or not the key is present in the saved state). 3054
If a session is performing two cryptographic operations simultaneously (see Section 5.14), then the 3055 cryptographic operations state of the session will contain all the necessary information to restore both 3056 operations. 3057
An attempt to save the cryptographic operations state of a session which does not currently have some 3058 active savable cryptographic operation(s) (encryption, decryption, digesting, signing without message 3059 recovery, verification without message recovery, or some legal combination of two of these) should fail 3060 with the error CKR_OPERATION_NOT_INITIALIZED. 3061
An attempt to save the cryptographic operations state of a session which is performing an appropriate 3062 cryptographic operation (or two), but which cannot be satisfied for any of various reasons (certain 3063 necessary state information and/or key information can’t leave the token, for example) should fail with the 3064 error CKR_STATE_UNSAVEABLE. 3065
Return values: CKR_BUFFER_TOO_SMALL, CKR_CRYPTOKI_NOT_INITIALIZED, 3066 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 3067 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 3068 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 3069 CKR_STATE_UNSAVEABLE, CKR_ARGUMENTS_BAD. 3070
Example: see C_SetOperationState. 3071
5.6.7 C_SetOperationState 3072
CK_DECLARE_FUNCTION(CK_RV, C_SetOperationState)( 3073 CK_SESSION_HANDLE hSession, 3074
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 95 of 168
CK_BYTE_PTR pOperationState, 3075 CK_ULONG ulOperationStateLen, 3076 CK_OBJECT_HANDLE hEncryptionKey, 3077 CK_OBJECT_HANDLE hAuthenticationKey 3078 ); 3079
C_SetOperationState restores the cryptographic operations state of a session from a string of bytes 3080 obtained with C_GetOperationState. hSession is the session’s handle; pOperationState points to the 3081 location holding the saved state; ulOperationStateLen holds the length of the saved state; 3082 hEncryptionKey holds a handle to the key which will be used for an ongoing encryption or decryption 3083 operation in the restored session (or 0 if no encryption or decryption key is needed, either because no 3084 such operation is ongoing in the stored session or because all the necessary key information is present in 3085 the saved state); hAuthenticationKey holds a handle to the key which will be used for an ongoing 3086 signature, MACing, or verification operation in the restored session (or 0 if no such key is needed, either 3087 because no such operation is ongoing in the stored session or because all the necessary key information 3088 is present in the saved state). 3089
The state need not have been obtained from the same session (the “source session”) as it is being 3090 restored to (the “destination session”). However, the source session and destination session should have 3091 a common session state (e.g., CKS_RW_USER_FUNCTIONS), and should be with a common token. 3092 There is also no guarantee that cryptographic operations state may be carried across logins, or across 3093 different Cryptoki implementations. 3094
If C_SetOperationState is supplied with alleged saved cryptographic operations state which it can 3095 determine is not valid saved state (or is cryptographic operations state from a session with a different 3096 session state, or is cryptographic operations state from a different token), it fails with the error 3097 CKR_SAVED_STATE_INVALID. 3098
Saved state obtained from calls to C_GetOperationState may or may not contain information about keys 3099 in use for ongoing cryptographic operations. If a saved cryptographic operations state has an ongoing 3100 encryption or decryption operation, and the key in use for the operation is not saved in the state, then it 3101 MUST be supplied to C_SetOperationState in the hEncryptionKey argument. If it is not, then 3102 C_SetOperationState will fail and return the error CKR_KEY_NEEDED. If the key in use for the 3103 operation is saved in the state, then it can be supplied in the hEncryptionKey argument, but this is not 3104 required. 3105
Similarly, if a saved cryptographic operations state has an ongoing signature, MACing, or verification 3106 operation, and the key in use for the operation is not saved in the state, then it MUST be supplied to 3107 C_SetOperationState in the hAuthenticationKey argument. If it is not, then C_SetOperationState will 3108 fail with the error CKR_KEY_NEEDED. If the key in use for the operation is saved in the state, then it can 3109 be supplied in the hAuthenticationKey argument, but this is not required. 3110
If an irrelevant key is supplied to C_SetOperationState call (e.g., a nonzero key handle is submitted in 3111 the hEncryptionKey argument, but the saved cryptographic operations state supplied does not have an 3112 ongoing encryption or decryption operation, then C_SetOperationState fails with the error 3113 CKR_KEY_NOT_NEEDED. 3114
If a key is supplied as an argument to C_SetOperationState, and C_SetOperationState can somehow 3115 detect that this key was not the key being used in the source session for the supplied cryptographic 3116 operations state (it may be able to detect this if the key or a hash of the key is present in the saved state, 3117 for example), then C_SetOperationState fails with the error CKR_KEY_CHANGED. 3118
An application can look at the CKF_RESTORE_KEY_NOT_NEEDED flag in the flags field of the 3119 CK_TOKEN_INFO field for a token to determine whether or not it needs to supply key handles to 3120 C_SetOperationState calls. If this flag is true, then a call to C_SetOperationState never needs a key 3121 handle to be supplied to it. If this flag is false, then at least some of the time, C_SetOperationState 3122 requires a key handle, and so the application should probably always pass in any relevant key handles 3123 when restoring cryptographic operations state to a session. 3124
C_SetOperationState can successfully restore cryptographic operations state to a session even if that 3125 session has active cryptographic or object search operations when C_SetOperationState is called (the 3126 ongoing operations are abruptly cancelled). 3127
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 96 of 168
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 3128 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 3129 CKR_HOST_MEMORY, CKR_KEY_CHANGED, CKR_KEY_NEEDED, CKR_KEY_NOT_NEEDED, 3130 CKR_OK, CKR_SAVED_STATE_INVALID, CKR_SESSION_CLOSED, 3131 CKR_SESSION_HANDLE_INVALID, CKR_ARGUMENTS_BAD. 3132
Example: 3133
CK_SESSION_HANDLE hSession; 3134
CK_MECHANISM digestMechanism; 3135
CK_BYTE_PTR pState; 3136
CK_ULONG ulStateLen; 3137
CK_BYTE data1[] = {0x01, 0x03, 0x05, 0x07}; 3138
CK_BYTE data2[] = {0x02, 0x04, 0x08}; 3139
CK_BYTE data3[] = {0x10, 0x0F, 0x0E, 0x0D, 0x0C}; 3140
CK_BYTE pDigest[20]; 3141
CK_ULONG ulDigestLen; 3142
CK_RV rv; 3143
3144
. 3145
. 3146
/* Initialize hash operation */ 3147
rv = C_DigestInit(hSession, &digestMechanism); 3148
assert(rv == CKR_OK); 3149
3150
/* Start hashing */ 3151
rv = C_DigestUpdate(hSession, data1, sizeof(data1)); 3152
assert(rv == CKR_OK); 3153
3154
/* Find out how big the state might be */ 3155
rv = C_GetOperationState(hSession, NULL_PTR, &ulStateLen); 3156
assert(rv == CKR_OK); 3157
3158
/* Allocate some memory and then get the state */ 3159
pState = (CK_BYTE_PTR) malloc(ulStateLen); 3160
rv = C_GetOperationState(hSession, pState, &ulStateLen); 3161
3162
/* Continue hashing */ 3163
rv = C_DigestUpdate(hSession, data2, sizeof(data2)); 3164
assert(rv == CKR_OK); 3165
3166
/* Restore state. No key handles needed */ 3167
rv = C_SetOperationState(hSession, pState, ulStateLen, 0, 0); 3168
assert(rv == CKR_OK); 3169
3170
/* Continue hashing from where we saved state */ 3171
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 97 of 168
rv = C_DigestUpdate(hSession, data3, sizeof(data3)); 3172
assert(rv == CKR_OK); 3173
3174
/* Conclude hashing operation */ 3175
ulDigestLen = sizeof(pDigest); 3176
rv = C_DigestFinal(hSession, pDigest, &ulDigestLen); 3177
if (rv == CKR_OK) { 3178
/* pDigest[] now contains the hash of 0x01030507100F0E0D0C */ 3179
. 3180
. 3181
} 3182
5.6.8 C_Login 3183
CK_DECLARE_FUNCTION(CK_RV, C_Login)( 3184 CK_SESSION_HANDLE hSession, 3185 CK_USER_TYPE userType, 3186 CK_UTF8CHAR_PTR pPin, 3187 CK_ULONG ulPinLen 3188 ); 3189
C_Login logs a user into a token. hSession is a session handle; userType is the user type; pPin points to 3190 the user’s PIN; ulPinLen is the length of the PIN. This standard allows PIN values to contain any valid 3191 UTF8 character, but the token may impose subset restrictions. 3192
When the user type is either CKU_SO or CKU_USER, if the call succeeds, each of the application's 3193 sessions will enter either the "R/W SO Functions" state, the "R/W User Functions" state, or the "R/O User 3194 Functions" state. If the user type is CKU_CONTEXT_SPECIFIC, the behavior of C_Login depends on the 3195 context in which it is called. Improper use of this user type will result in a return value 3196 CKR_OPERATION_NOT_INITIALIZED.. 3197
If the token has a “protected authentication path”, as indicated by the 3198 CKF_PROTECTED_AUTHENTICATION_PATH flag in its CK_TOKEN_INFO being set, then that means 3199 that there is some way for a user to be authenticated to the token without having to send a PIN through 3200 the Cryptoki library. One such possibility is that the user enters a PIN on a PIN pad on the token itself, or 3201 on the slot device. Or the user might not even use a PIN—authentication could be achieved by some 3202 fingerprint-reading device, for example. To log into a token with a protected authentication path, the pPin 3203 parameter to C_Login should be NULL_PTR. When C_Login returns, whatever authentication method 3204 supported by the token will have been performed; a return value of CKR_OK means that the user was 3205 successfully authenticated, and a return value of CKR_PIN_INCORRECT means that the user was 3206 denied access. 3207
If there are any active cryptographic or object finding operations in an application’s session, and then 3208 C_Login is successfully executed by that application, it may or may not be the case that those operations 3209 are still active. Therefore, before logging in, any active operations should be finished. 3210
If the application calling C_Login has a R/O session open with the token, then it will be unable to log the 3211 SO into a session (see [PKCS11-UG] for further details). An attempt to do this will result in the error code 3212 CKR_SESSION_READ_ONLY_EXISTS. 3213
C_Login may be called repeatedly, without intervening C_Logout calls, if (and only if) a key with the 3214 CKA_ALWAYS_AUTHENTICATE attribute set to CK_TRUE exists, and the user needs to do 3215 cryptographic operation on this key. See further Section 4.9. 3216
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 3217 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 3218 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 3219 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_PIN_INCORRECT, 3220
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 98 of 168
CKR_PIN_LOCKED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 3221 CKR_SESSION_READ_ONLY_EXISTS, CKR_USER_ALREADY_LOGGED_IN, 3222 CKR_USER_ANOTHER_ALREADY_LOGGED_IN, CKR_USER_PIN_NOT_INITIALIZED, 3223 CKR_USER_TOO_MANY_TYPES, CKR_USER_TYPE_INVALID. 3224
Example: see C_Logout. 3225
5.6.9 C_LoginUser 3226
CK_DECLARE_FUNCTION(CK_RV, C_LoginUser)( 3227 CK_SESSION_HANDLE hSession, 3228 CK_USER_TYPE userType, 3229 CK_UTF8CHAR_PTR pPin, 3230 CK_ULONG ulPinLen, 3231 CK_UTF8CHAR_PTR pUsername, 3232 CK_ULONG ulUsernameLen 3233 ); 3234
C_LoginUser logs a user into a token. hSession is a session handle; userType is the user type; pPin 3235 points to the user’s PIN; ulPinLen is the length of the PIN, pUsername points to the user name, 3236 ulUsernameLen is the length of the user name. This standard allows PIN and user name values to 3237 contain any valid UTF8 character, but the token may impose subset restrictions. 3238
When the user type is either CKU_SO or CKU_USER, if the call succeeds, each of the application's 3239 sessions will enter either the "R/W SO Functions" state, the "R/W User Functions" state, or the "R/O User 3240 Functions" state. If the user type is CKU_CONTEXT_SPECIFIC, the behavior of C_LoginUser depends 3241 on the context in which it is called. Improper use of this user type will result in a return value 3242 CKR_OPERATION_NOT_INITIALIZED. 3243
If the token has a “protected authentication path”, as indicated by the 3244 CKF_PROTECTED_AUTHENTICATION_PATH flag in its CK_TOKEN_INFO being set, then that means 3245 that there is some way for a user to be authenticated to the token without having to send a PIN through 3246 the Cryptoki library. One such possibility is that the user enters a PIN on a PIN pad on the token itself, or 3247 on the slot device. The user might not even use a PIN—authentication could be achieved by some 3248 fingerprint-reading device, for example. To log into a token with a protected authentication path, the pPin 3249 parameter to C_LoginUser should be NULL_PTR. When C_LoginUser returns, whatever authentication 3250 method supported by the token will have been performed; a return value of CKR_OK means that the user 3251 was successfully authenticated, and a return value of CKR_PIN_INCORRECT means that the user was 3252 denied access. 3253
If there are any active cryptographic or object finding operations in an application’s session, and then 3254 C_LoginUser is successfully executed by that application, it may or may not be the case that those 3255 operations are still active. Therefore, before logging in, any active operations should be finished. 3256
If the application calling C_LoginUser has a R/O session open with the token, then it will be unable to log 3257 the SO into a session (see [PKCS11-UG] for further details). An attempt to do this will result in the error 3258 code CKR_SESSION_READ_ONLY_EXISTS. 3259
C_LoginUser may be called repeatedly, without intervening C_Logout calls, if (and only if) a key with the 3260 CKA_ALWAYS_AUTHENTICATE attribute set to CK_TRUE exists, and the user needs to do 3261 cryptographic operation on this key. See further Section 4.9. 3262
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 3263 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 3264 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 3265 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_PIN_INCORRECT, 3266 CKR_PIN_LOCKED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 3267 CKR_SESSION_READ_ONLY_EXISTS, CKR_USER_ALREADY_LOGGED_IN, 3268 CKR_USER_ANOTHER_ALREADY_LOGGED_IN, CKR_USER_PIN_NOT_INITIALIZED, 3269 CKR_USER_TOO_MANY_TYPES, CKR_USER_TYPE_INVALID. 3270
Example: 3271
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 99 of 168
CK_SESSION_HANDLE hSession; 3272
CK_UTF8CHAR userPin[] = {“MyPIN”}; 3273
CK_UTF8CHAR userName[] = {“MyUserName”}; 3274
CK_RV rv; 3275
3276
rv = C_LoginUser(hSession, CKU_USER, userPin, sizeof(userPin)-1, userName, 3277
sizeof(userName)-1); 3278
if (rv == CKR_OK) { 3279
. 3280
. 3281
rv = C_Logout(hSession); 3282
if (rv == CKR_OK) { 3283
. 3284
. 3285
} 3286
} 3287
5.6.10 C_Logout 3288
CK_DECLARE_FUNCTION(CK_RV, C_Logout)( 3289 CK_SESSION_HANDLE hSession 3290 ); 3291
C_Logout logs a user out from a token. hSession is the session’s handle. 3292
Depending on the current user type, if the call succeeds, each of the application’s sessions will enter 3293 either the “R/W Public Session” state or the “R/O Public Session” state. 3294
When C_Logout successfully executes, any of the application’s handles to private objects become invalid 3295 (even if a user is later logged back into the token, those handles remain invalid). In addition, all private 3296 session objects from sessions belonging to the application are destroyed. 3297
If there are any active cryptographic or object-finding operations in an application’s session, and then 3298 C_Logout is successfully executed by that application, it may or may not be the case that those 3299 operations are still active. Therefore, before logging out, any active operations should be finished. 3300
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 3301 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 3302 CKR_HOST_MEMORY, CKR_OK, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 3303 CKR_USER_NOT_LOGGED_IN. 3304
Example: 3305
CK_SESSION_HANDLE hSession; 3306
CK_UTF8CHAR userPin[] = {“MyPIN”}; 3307
CK_RV rv; 3308
3309
rv = C_Login(hSession, CKU_USER, userPin, sizeof(userPin)-1); 3310
if (rv == CKR_OK) { 3311
. 3312
. 3313
rv = C_Logout(hSession); 3314
if (rv == CKR_OK) { 3315
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 100 of 168
. 3316
. 3317
} 3318
} 3319
5.7 Object management functions 3320
Cryptoki provides the following functions for managing objects. Additional functions provided specifically 3321 for managing key objects are described in Section 5.18. 3322
5.7.1 C_CreateObject 3323
CK_DECLARE_FUNCTION(CK_RV, C_CreateObject)( 3324 CK_SESSION_HANDLE hSession, 3325 CK_ATTRIBUTE_PTR pTemplate, 3326 CK_ULONG ulCount, 3327 CK_OBJECT_HANDLE_PTR phObject 3328 ); 3329
C_CreateObject creates a new object. hSession is the session’s handle; pTemplate points to the object’s 3330 template; ulCount is the number of attributes in the template; phObject points to the location that receives 3331 the new object’s handle. 3332
If a call to C_CreateObject cannot support the precise template supplied to it, it will fail and return without 3333 creating any object. 3334
If C_CreateObject is used to create a key object, the key object will have its CKA_LOCAL attribute set to 3335 CK_FALSE. If that key object is a secret or private key then the new key will have the 3336 CKA_ALWAYS_SENSITIVE attribute set to CK_FALSE, and the CKA_NEVER_EXTRACTABLE 3337 attribute set to CK_FALSE. 3338
Only session objects can be created during a read-only session. Only public objects can be created 3339 unless the normal user is logged in. 3340
Whenever an object is created, a value for CKA_UNIQUE_ID is generated and assigned to the new 3341 object (See Section 4.4.1). 3342
Return values: CKR_ARGUMENTS_BAD, CKR_ATTRIBUTE_READ_ONLY, 3343 CKR_ATTRIBUTE_TYPE_INVALID, CKR_ATTRIBUTE_VALUE_INVALID, 3344 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_CURVE_NOT_SUPPORTED, CKR_DEVICE_ERROR, 3345 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_DOMAIN_PARAMS_INVALID, 3346 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 3347 CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 3348 CKR_SESSION_READ_ONLY, CKR_TEMPLATE_INCOMPLETE, CKR_TEMPLATE_INCONSISTENT, 3349 CKR_TOKEN_WRITE_PROTECTED, CKR_USER_NOT_LOGGED_IN. 3350
Example: 3351
CK_SESSION_HANDLE hSession; 3352
CK_OBJECT_HANDLE 3353
hData, 3354
hCertificate, 3355
hKey; 3356
CK_OBJECT_CLASS 3357
dataClass = CKO_DATA, 3358
certificateClass = CKO_CERTIFICATE, 3359
keyClass = CKO_PUBLIC_KEY; 3360
CK_KEY_TYPE keyType = CKK_RSA; 3361
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 101 of 168
CK_UTF8CHAR application[] = {“My Application”}; 3362
CK_BYTE dataValue[] = {...}; 3363
CK_BYTE subject[] = {...}; 3364
CK_BYTE id[] = {...}; 3365
CK_BYTE certificateValue[] = {...}; 3366
CK_BYTE modulus[] = {...}; 3367
CK_BYTE exponent[] = {...}; 3368
CK_BBOOL true = CK_TRUE; 3369
CK_ATTRIBUTE dataTemplate[] = { 3370
{CKA_CLASS, &dataClass, sizeof(dataClass)}, 3371
{CKA_TOKEN, &true, sizeof(true)}, 3372
{CKA_APPLICATION, application, sizeof(application)-1}, 3373
{CKA_VALUE, dataValue, sizeof(dataValue)} 3374
}; 3375
CK_ATTRIBUTE certificateTemplate[] = { 3376
{CKA_CLASS, &certificateClass, sizeof(certificateClass)}, 3377
{CKA_TOKEN, &true, sizeof(true)}, 3378
{CKA_SUBJECT, subject, sizeof(subject)}, 3379
{CKA_ID, id, sizeof(id)}, 3380
{CKA_VALUE, certificateValue, sizeof(certificateValue)} 3381
}; 3382
CK_ATTRIBUTE keyTemplate[] = { 3383
{CKA_CLASS, &keyClass, sizeof(keyClass)}, 3384
{CKA_KEY_TYPE, &keyType, sizeof(keyType)}, 3385
{CKA_WRAP, &true, sizeof(true)}, 3386
{CKA_MODULUS, modulus, sizeof(modulus)}, 3387
{CKA_PUBLIC_EXPONENT, exponent, sizeof(exponent)} 3388
}; 3389
CK_RV rv; 3390
3391
. 3392
. 3393
/* Create a data object */ 3394
rv = C_CreateObject(hSession, dataTemplate, 4, &hData); 3395
if (rv == CKR_OK) { 3396
. 3397
. 3398
} 3399
3400
/* Create a certificate object */ 3401
rv = C_CreateObject( 3402
hSession, certificateTemplate, 5, &hCertificate); 3403
if (rv == CKR_OK) { 3404
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 102 of 168
. 3405
. 3406
} 3407
3408
/* Create an RSA public key object */ 3409
rv = C_CreateObject(hSession, keyTemplate, 5, &hKey); 3410
if (rv == CKR_OK) { 3411
. 3412
. 3413
} 3414
5.7.2 C_CopyObject 3415
CK_DECLARE_FUNCTION(CK_RV, C_CopyObject)( 3416 CK_SESSION_HANDLE hSession, 3417 CK_OBJECT_HANDLE hObject, 3418 CK_ATTRIBUTE_PTR pTemplate, 3419 CK_ULONG ulCount, 3420 CK_OBJECT_HANDLE_PTR phNewObject 3421 ); 3422
C_CopyObject copies an object, creating a new object for the copy. hSession is the session’s handle; 3423 hObject is the object’s handle; pTemplate points to the template for the new object; ulCount is the number 3424 of attributes in the template; phNewObject points to the location that receives the handle for the copy of 3425 the object. 3426
The template may specify new values for any attributes of the object that can ordinarily be modified (e.g., 3427 in the course of copying a secret key, a key’s CKA_EXTRACTABLE attribute may be changed from 3428 CK_TRUE to CK_FALSE, but not the other way around. If this change is made, the new key’s 3429 CKA_NEVER_EXTRACTABLE attribute will have the value CK_FALSE. Similarly, the template may 3430 specify that the new key’s CKA_SENSITIVE attribute be CK_TRUE; the new key will have the same 3431 value for its CKA_ALWAYS_SENSITIVE attribute as the original key). It may also specify new values of 3432 the CKA_TOKEN and CKA_PRIVATE attributes (e.g., to copy a session object to a token object). If the 3433 template specifies a value of an attribute which is incompatible with other existing attributes of the object, 3434 the call fails with the return code CKR_TEMPLATE_INCONSISTENT. 3435
If a call to C_CopyObject cannot support the precise template supplied to it, it will fail and return without 3436 creating any object. If the object indicated by hObject has its CKA_COPYABLE attribute set to 3437 CK_FALSE, C_CopyObject will return CKR_ACTION_PROHIBITED. 3438
Whenever an object is copied, a new value for CKA_UNIQUE_ID is generated and assigned to the new 3439 object (See Section 4.4.1). 3440
Only session objects can be created during a read-only session. Only public objects can be created 3441 unless the normal user is logged in. 3442
Return values: , CKR_ACTION_PROHIBITED, CKR_ARGUMENTS_BAD, 3443 CKR_ATTRIBUTE_READ_ONLY, CKR_ATTRIBUTE_TYPE_INVALID, 3444 CKR_ATTRIBUTE_VALUE_INVALID, CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, 3445 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, 3446 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OBJECT_HANDLE_INVALID, CKR_OK, 3447 CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 3448 CKR_SESSION_READ_ONLY, CKR_TEMPLATE_INCONSISTENT, 3449 CKR_TOKEN_WRITE_PROTECTED, CKR_USER_NOT_LOGGED_IN. 3450
Example: 3451
CK_SESSION_HANDLE hSession; 3452
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 103 of 168
CK_OBJECT_HANDLE hKey, hNewKey; 3453
CK_OBJECT_CLASS keyClass = CKO_SECRET_KEY; 3454
CK_KEY_TYPE keyType = CKK_DES; 3455
CK_BYTE id[] = {...}; 3456
CK_BYTE keyValue[] = {...}; 3457
CK_BBOOL false = CK_FALSE; 3458
CK_BBOOL true = CK_TRUE; 3459
CK_ATTRIBUTE keyTemplate[] = { 3460
{CKA_CLASS, &keyClass, sizeof(keyClass)}, 3461
{CKA_KEY_TYPE, &keyType, sizeof(keyType)}, 3462
{CKA_TOKEN, &false, sizeof(false)}, 3463
{CKA_ID, id, sizeof(id)}, 3464
{CKA_VALUE, keyValue, sizeof(keyValue)} 3465
}; 3466
CK_ATTRIBUTE copyTemplate[] = { 3467
{CKA_TOKEN, &true, sizeof(true)} 3468
}; 3469
CK_RV rv; 3470
3471
. 3472
. 3473
/* Create a DES secret key session object */ 3474
rv = C_CreateObject(hSession, keyTemplate, 5, &hKey); 3475
if (rv == CKR_OK) { 3476
/* Create a copy which is a token object */ 3477
rv = C_CopyObject(hSession, hKey, copyTemplate, 1, &hNewKey); 3478
. 3479
. 3480
} 3481
5.7.3 C_DestroyObject 3482
CK_DECLARE_FUNCTION(CK_RV, C_DestroyObject)( 3483 CK_SESSION_HANDLE hSession, 3484 CK_OBJECT_HANDLE hObject 3485 ); 3486
C_DestroyObject destroys an object. hSession is the session’s handle; and hObject is the object’s 3487 handle. 3488
Only session objects can be destroyed during a read-only session. Only public objects can be destroyed 3489 unless the normal user is logged in. 3490
Certain objects may not be destroyed. Calling C_DestroyObject on such objects will result in the 3491 CKR_ACTION_PROHIBITED error code. An application can consult the object's CKA_DESTROYABLE 3492 attribute to determine if an object may be destroyed or not. 3493
Return values: CKR_ACTION_PROHIBITED, CKR_CRYPTOKI_NOT_INITIALIZED, 3494 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 3495 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, 3496
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 104 of 168
CKR_OBJECT_HANDLE_INVALID, CKR_OK, CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, 3497 CKR_SESSION_HANDLE_INVALID, CKR_SESSION_READ_ONLY, 3498 CKR_TOKEN_WRITE_PROTECTED. 3499
Example: see C_GetObjectSize. 3500
5.7.4 C_GetObjectSize 3501
CK_DECLARE_FUNCTION(CK_RV, C_GetObjectSize)( 3502 CK_SESSION_HANDLE hSession, 3503 CK_OBJECT_HANDLE hObject, 3504 CK_ULONG_PTR pulSize 3505 ); 3506
C_GetObjectSize gets the size of an object in bytes. hSession is the session’s handle; hObject is the 3507 object’s handle; pulSize points to the location that receives the size in bytes of the object. 3508
Cryptoki does not specify what the precise meaning of an object’s size is. Intuitively, it is some measure 3509 of how much token memory the object takes up. If an application deletes (say) a private object of size S, 3510 it might be reasonable to assume that the ulFreePrivateMemory field of the token’s CK_TOKEN_INFO 3511 structure increases by approximately S. 3512
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 3513 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 3514 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, 3515 CKR_INFORMATION_SENSITIVE, CKR_OBJECT_HANDLE_INVALID, CKR_OK, 3516 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 3517
Example: 3518
CK_SESSION_HANDLE hSession; 3519
CK_OBJECT_HANDLE hObject; 3520
CK_OBJECT_CLASS dataClass = CKO_DATA; 3521
CK_UTF8CHAR application[] = {“My Application”}; 3522
CK_BYTE value[] = {...}; 3523
CK_BBOOL true = CK_TRUE; 3524
CK_ATTRIBUTE template[] = { 3525
{CKA_CLASS, &dataClass, sizeof(dataClass)}, 3526
{CKA_TOKEN, &true, sizeof(true)}, 3527
{CKA_APPLICATION, application, sizeof(application)-1}, 3528
{CKA_VALUE, value, sizeof(value)} 3529
}; 3530
CK_ULONG ulSize; 3531
CK_RV rv; 3532
3533
. 3534
. 3535
rv = C_CreateObject(hSession, template, 4, &hObject); 3536
if (rv == CKR_OK) { 3537
rv = C_GetObjectSize(hSession, hObject, &ulSize); 3538
if (rv != CKR_INFORMATION_SENSITIVE) { 3539
. 3540
. 3541
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 105 of 168
} 3542
3543
rv = C_DestroyObject(hSession, hObject); 3544
. 3545
. 3546
} 3547
5.7.5 C_GetAttributeValue 3548
CK_DECLARE_FUNCTION(CK_RV, C_GetAttributeValue)( 3549 CK_SESSION_HANDLE hSession, 3550 CK_OBJECT_HANDLE hObject, 3551 CK_ATTRIBUTE_PTR pTemplate, 3552 CK_ULONG ulCount 3553 ); 3554
C_GetAttributeValue obtains the value of one or more attributes of an object. hSession is the session’s 3555 handle; hObject is the object’s handle; pTemplate points to a template that specifies which attribute 3556 values are to be obtained, and receives the attribute values; ulCount is the number of attributes in the 3557 template. 3558
For each (type, pValue, ulValueLen) triple in the template, C_GetAttributeValue performs the following 3559 algorithm: 3560
1. If the specified attribute (i.e., the attribute specified by the type field) for the object cannot be revealed 3561 because the object is sensitive or unextractable, then the ulValueLen field in that triple is modified to 3562 hold the value CK_UNAVAILABLE_INFORMATION. 3563
2. Otherwise, if the specified value for the object is invalid (the object does not possess such an 3564 attribute), then the ulValueLen field in that triple is modified to hold the value 3565 CK_UNAVAILABLE_INFORMATION. 3566
3. Otherwise, if the pValue field has the value NULL_PTR, then the ulValueLen field is modified to hold 3567 the exact length of the specified attribute for the object. 3568
4. Otherwise, if the length specified in ulValueLen is large enough to hold the value of the specified 3569 attribute for the object, then that attribute is copied into the buffer located at pValue, and the 3570 ulValueLen field is modified to hold the exact length of the attribute. 3571
5. Otherwise, the ulValueLen field is modified to hold the value CK_UNAVAILABLE_INFORMATION. 3572
If case 1 applies to any of the requested attributes, then the call should return the value 3573 CKR_ATTRIBUTE_SENSITIVE. If case 2 applies to any of the requested attributes, then the call should 3574 return the value CKR_ATTRIBUTE_TYPE_INVALID. If case 5 applies to any of the requested attributes, 3575 then the call should return the value CKR_BUFFER_TOO_SMALL. As usual, if more than one of these 3576 error codes is applicable, Cryptoki may return any of them. Only if none of them applies to any of the 3577 requested attributes will CKR_OK be returned. 3578
In the special case of an attribute whose value is an array of attributes, for example 3579 CKA_WRAP_TEMPLATE, where it is passed in with pValue not NULL, the length specified in ulValueLen 3580 MUST be large enough to hold all attributes in the array. If the pValue of elements within the array is 3581 NULL_PTR then the ulValueLen of elements within the array will be set to the required length. If the 3582 pValue of elements within the array is not NULL_PTR, then the ulValueLen element of attributes within 3583 the array MUST reflect the space that the corresponding pValue points to, and pValue is filled in if there is 3584 sufficient room. Therefore it is important to initialize the contents of a buffer before calling 3585 C_GetAttributeValue to get such an array value. Note that the type element of attributes within the array 3586 MUST be ignored on input and MUST be set on output. If any ulValueLen within the array isn't large 3587 enough, it will be set to CK_UNAVAILABLE_INFORMATION and the function will return 3588 CKR_BUFFER_TOO_SMALL, as it does if an attribute in the pTemplate argument has ulValueLen too 3589 small. Note that any attribute whose value is an array of attributes is identifiable by virtue of the attribute 3590 type having the CKF_ARRAY_ATTRIBUTE bit set. 3591
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 106 of 168
Note that the error codes CKR_ATTRIBUTE_SENSITIVE, CKR_ATTRIBUTE_TYPE_INVALID, and 3592 CKR_BUFFER_TOO_SMALL do not denote true errors for C_GetAttributeValue. If a call to 3593 C_GetAttributeValue returns any of these three values, then the call MUST nonetheless have processed 3594 every attribute in the template supplied to C_GetAttributeValue. Each attribute in the template whose 3595 value can be returned by the call to C_GetAttributeValue will be returned by the call to 3596 C_GetAttributeValue. 3597
Return values: CKR_ARGUMENTS_BAD, CKR_ATTRIBUTE_SENSITIVE, 3598 CKR_ATTRIBUTE_TYPE_INVALID, CKR_BUFFER_TOO_SMALL, 3599 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 3600 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 3601 CKR_HOST_MEMORY, CKR_OBJECT_HANDLE_INVALID, CKR_OK, CKR_SESSION_CLOSED, 3602 CKR_SESSION_HANDLE_INVALID. 3603
Example: 3604
CK_SESSION_HANDLE hSession; 3605
CK_OBJECT_HANDLE hObject; 3606
CK_BYTE_PTR pModulus, pExponent; 3607
CK_ATTRIBUTE template[] = { 3608
{CKA_MODULUS, NULL_PTR, 0}, 3609
{CKA_PUBLIC_EXPONENT, NULL_PTR, 0} 3610
}; 3611
CK_RV rv; 3612
3613
. 3614
. 3615
rv = C_GetAttributeValue(hSession, hObject, template, 2); 3616
if (rv == CKR_OK) { 3617
pModulus = (CK_BYTE_PTR) malloc(template[0].ulValueLen); 3618
template[0].pValue = pModulus; 3619
/* template[0].ulValueLen was set by C_GetAttributeValue */ 3620
3621
pExponent = (CK_BYTE_PTR) malloc(template[1].ulValueLen); 3622
template[1].pValue = pExponent; 3623
/* template[1].ulValueLen was set by C_GetAttributeValue */ 3624
3625
rv = C_GetAttributeValue(hSession, hObject, template, 2); 3626
if (rv == CKR_OK) { 3627
. 3628
. 3629
} 3630
free(pModulus); 3631
free(pExponent); 3632
} 3633
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 107 of 168
5.7.6 C_SetAttributeValue 3634
CK_DECLARE_FUNCTION(CK_RV, C_SetAttributeValue)( 3635 CK_SESSION_HANDLE hSession, 3636 CK_OBJECT_HANDLE hObject, 3637 CK_ATTRIBUTE_PTR pTemplate, 3638 CK_ULONG ulCount 3639 ); 3640
C_SetAttributeValue modifies the value of one or more attributes of an object. hSession is the session’s 3641 handle; hObject is the object’s handle; pTemplate points to a template that specifies which attribute 3642 values are to be modified and their new values; ulCount is the number of attributes in the template. 3643
Certain objects may not be modified. Calling C_SetAttributeValue on such objects will result in the 3644 CKR_ACTION_PROHIBITED error code. An application can consult the object's CKA_MODIFIABLE 3645 attribute to determine if an object may be modified or not. 3646
Only session objects can be modified during a read-only session. 3647
The template may specify new values for any attributes of the object that can be modified. If the template 3648 specifies a value of an attribute which is incompatible with other existing attributes of the object, the call 3649 fails with the return code CKR_TEMPLATE_INCONSISTENT. 3650
Not all attributes can be modified; see Section 4.1.2 for more details. 3651
Return values: CKR_ACTION_PROHIBITED, CKR_ARGUMENTS_BAD, 3652 CKR_ATTRIBUTE_READ_ONLY, CKR_ATTRIBUTE_TYPE_INVALID, 3653 CKR_ATTRIBUTE_VALUE_INVALID, CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, 3654 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, 3655 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OBJECT_HANDLE_INVALID, CKR_OK, 3656 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_SESSION_READ_ONLY, 3657 CKR_TEMPLATE_INCONSISTENT, CKR_TOKEN_WRITE_PROTECTED, 3658 CKR_USER_NOT_LOGGED_IN. 3659
Example: 3660
CK_SESSION_HANDLE hSession; 3661
CK_OBJECT_HANDLE hObject; 3662
CK_UTF8CHAR label[] = {“New label”}; 3663
CK_ATTRIBUTE template[] = { 3664
{CKA_LABEL, label, sizeof(label)-1} 3665
}; 3666
CK_RV rv; 3667
3668
. 3669
. 3670
rv = C_SetAttributeValue(hSession, hObject, template, 1); 3671
if (rv == CKR_OK) { 3672
. 3673
. 3674
} 3675
5.7.7 C_FindObjectsInit 3676
CK_DECLARE_FUNCTION(CK_RV, C_FindObjectsInit)( 3677 CK_SESSION_HANDLE hSession, 3678 CK_ATTRIBUTE_PTR pTemplate, 3679
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 108 of 168
CK_ULONG ulCount 3680 ); 3681
C_FindObjectsInit initializes a search for token and session objects that match a template. hSession is 3682 the session’s handle; pTemplate points to a search template that specifies the attribute values to match; 3683 ulCount is the number of attributes in the search template. The matching criterion is an exact byte-for-3684 byte match with all attributes in the template. To find all objects, set ulCount to 0. 3685
After calling C_FindObjectsInit, the application may call C_FindObjects one or more times to obtain 3686 handles for objects matching the template, and then eventually call C_FindObjectsFinal to finish the 3687 active search operation. At most one search operation may be active at a given time in a given session. 3688
The object search operation will only find objects that the session can view. For example, an object 3689 search in an “R/W Public Session” will not find any private objects (even if one of the attributes in the 3690 search template specifies that the search is for private objects). 3691
If a search operation is active, and objects are created or destroyed which fit the search template for the 3692 active search operation, then those objects may or may not be found by the search operation. Note that 3693 this means that, under these circumstances, the search operation may return invalid object handles. 3694
Even though C_FindObjectsInit can return the values CKR_ATTRIBUTE_TYPE_INVALID and 3695 CKR_ATTRIBUTE_VALUE_INVALID, it is not required to. For example, if it is given a search template 3696 with nonexistent attributes in it, it can return CKR_ATTRIBUTE_TYPE_INVALID, or it can initialize a 3697 search operation which will match no objects and return CKR_OK. 3698
If the CKA_UNIQUE_ID attribute is present in the search template, either zero or one objects will be 3699 found, since at most one object can have any particular CKA_UNIQUE_ID value. 3700
Return values: CKR_ARGUMENTS_BAD, CKR_ATTRIBUTE_TYPE_INVALID, 3701 CKR_ATTRIBUTE_VALUE_INVALID, CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, 3702 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, 3703 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_ACTIVE, 3704 CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 3705
Example: see C_FindObjectsFinal. 3706
5.7.8 C_FindObjects 3707
CK_DECLARE_FUNCTION(CK_RV, C_FindObjects)( 3708 CK_SESSION_HANDLE hSession, 3709 CK_OBJECT_HANDLE_PTR phObject, 3710 CK_ULONG ulMaxObjectCount, 3711 CK_ULONG_PTR pulObjectCount 3712 ); 3713
C_FindObjects continues a search for token and session objects that match a template, obtaining 3714 additional object handles. hSession is the session’s handle; phObject points to the location that receives 3715 the list (array) of additional object handles; ulMaxObjectCount is the maximum number of object handles 3716 to be returned; pulObjectCount points to the location that receives the actual number of object handles 3717 returned. 3718
If there are no more objects matching the template, then the location that pulObjectCount points to 3719 receives the value 0. 3720
The search MUST have been initialized with C_FindObjectsInit. 3721
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 3722 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 3723 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 3724 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 3725
Example: see C_FindObjectsFinal. 3726
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 109 of 168
5.7.9 C_FindObjectsFinal 3727
CK_DECLARE_FUNCTION(CK_RV, C_FindObjectsFinal)( 3728 CK_SESSION_HANDLE hSession 3729 ); 3730
C_FindObjectsFinal terminates a search for token and session objects. hSession is the session’s 3731 handle. 3732
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 3733 CKR_DEVICE_REMOVED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 3734 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 3735 CKR_SESSION_HANDLE_INVALID. 3736
Example: 3737
CK_SESSION_HANDLE hSession; 3738
CK_OBJECT_HANDLE hObject; 3739
CK_ULONG ulObjectCount; 3740
CK_RV rv; 3741
3742
. 3743
. 3744
rv = C_FindObjectsInit(hSession, NULL_PTR, 0); 3745
assert(rv == CKR_OK); 3746
while (1) { 3747
rv = C_FindObjects(hSession, &hObject, 1, &ulObjectCount); 3748
if (rv != CKR_OK || ulObjectCount == 0) 3749
break; 3750
. 3751
. 3752
} 3753
3754
rv = C_FindObjectsFinal(hSession); 3755
assert(rv == CKR_OK); 3756
5.8 Encryption functions 3757
Cryptoki provides the following functions for encrypting data: 3758
5.8.1 C_EncryptInit 3759
CK_DECLARE_FUNCTION(CK_RV, C_EncryptInit)( 3760 CK_SESSION_HANDLE hSession, 3761 CK_MECHANISM_PTR pMechanism, 3762 CK_OBJECT_HANDLE hKey 3763 ); 3764
C_EncryptInit initializes an encryption operation. hSession is the session’s handle; pMechanism points 3765 to the encryption mechanism; hKey is the handle of the encryption key. 3766
The CKA_ENCRYPT attribute of the encryption key, which indicates whether the key supports 3767 encryption, MUST be CK_TRUE. 3768
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 110 of 168
After calling C_EncryptInit, the application can either call C_Encrypt to encrypt data in a single part; or 3769 call C_EncryptUpdate zero or more times, followed by C_EncryptFinal, to encrypt data in multiple parts. 3770 The encryption operation is active until the application uses a call to C_Encrypt or C_EncryptFinal to 3771 actually obtain the final piece of ciphertext. To process additional data (in single or multiple parts), the 3772 application MUST call C_EncryptInit again. 3773
C_EncryptInit can be called with pMechanism set to NULL_PTR to terminate an active encryption 3774 operation. If an active operation operations cannot be cancelled, CKR_OPERATION_CANCEL_FAILED 3775 must be returned. 3776
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 3777 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 3778 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED, 3779 CKR_KEY_HANDLE_INVALID, CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, 3780 CKR_MECHANISM_INVALID, CKR_MECHANISM_PARAM_INVALID, CKR_OK, 3781 CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, 3782 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 3783 CKR_OPERATION_CANCEL_FAILED. 3784
Example: see C_EncryptFinal. 3785
5.8.2 C_Encrypt 3786
CK_DECLARE_FUNCTION(CK_RV, C_Encrypt)( 3787 CK_SESSION_HANDLE hSession, 3788 CK_BYTE_PTR pData, 3789 CK_ULONG ulDataLen, 3790 CK_BYTE_PTR pEncryptedData, 3791 CK_ULONG_PTR pulEncryptedDataLen 3792 ); 3793
C_Encrypt encrypts single-part data. hSession is the session’s handle; pData points to the data; 3794 ulDataLen is the length in bytes of the data; pEncryptedData points to the location that receives the 3795 encrypted data; pulEncryptedDataLen points to the location that holds the length in bytes of the encrypted 3796 data. 3797
C_Encrypt uses the convention described in Section 5.2 on producing output. 3798
The encryption operation MUST have been initialized with C_EncryptInit. A call to C_Encrypt always 3799 terminates the active encryption operation unless it returns CKR_BUFFER_TOO_SMALL or is a 3800 successful call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the 3801 ciphertext. 3802
C_Encrypt cannot be used to terminate a multi-part operation, and MUST be called after C_EncryptInit 3803 without intervening C_EncryptUpdate calls. 3804
For some encryption mechanisms, the input plaintext data has certain length constraints (either because 3805 the mechanism can only encrypt relatively short pieces of plaintext, or because the mechanism’s input 3806 data MUST consist of an integral number of blocks). If these constraints are not satisfied, then 3807 C_Encrypt will fail with return code CKR_DATA_LEN_RANGE. 3808
The plaintext and ciphertext can be in the same place, i.e., it is OK if pData and pEncryptedData point to 3809 the same location. 3810
For most mechanisms, C_Encrypt is equivalent to a sequence of C_EncryptUpdate operations followed 3811 by C_EncryptFinal. 3812
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 3813 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_INVALID, CKR_DATA_LEN_RANGE, 3814 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 3815 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 3816 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 3817 CKR_SESSION_HANDLE_INVALID. 3818
Example: see C_EncryptFinal for an example of similar functions. 3819
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 111 of 168
5.8.3 C_EncryptUpdate 3820
CK_DECLARE_FUNCTION(CK_RV, C_EncryptUpdate)( 3821 CK_SESSION_HANDLE hSession, 3822 CK_BYTE_PTR pPart, 3823 CK_ULONG ulPartLen, 3824 CK_BYTE_PTR pEncryptedPart, 3825 CK_ULONG_PTR pulEncryptedPartLen 3826 ); 3827
C_EncryptUpdate continues a multiple-part encryption operation, processing another data part. 3828 hSession is the session’s handle; pPart points to the data part; ulPartLen is the length of the data part; 3829 pEncryptedPart points to the location that receives the encrypted data part; pulEncryptedPartLen points 3830 to the location that holds the length in bytes of the encrypted data part. 3831
C_EncryptUpdate uses the convention described in Section 5.2 on producing output. 3832
The encryption operation MUST have been initialized with C_EncryptInit. This function may be called 3833 any number of times in succession. A call to C_EncryptUpdate which results in an error other than 3834 CKR_BUFFER_TOO_SMALL terminates the current encryption operation. 3835
The plaintext and ciphertext can be in the same place, i.e., it is OK if pPart and pEncryptedPart point to 3836 the same location. 3837
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 3838 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, 3839 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, 3840 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 3841 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 3842
Example: see C_EncryptFinal. 3843
5.8.4 C_EncryptFinal 3844
CK_DECLARE_FUNCTION(CK_RV, C_EncryptFinal)( 3845 CK_SESSION_HANDLE hSession, 3846 CK_BYTE_PTR pLastEncryptedPart, 3847 CK_ULONG_PTR pulLastEncryptedPartLen 3848 ); 3849
C_EncryptFinal finishes a multiple-part encryption operation. hSession is the session’s handle; 3850 pLastEncryptedPart points to the location that receives the last encrypted data part, if any; 3851 pulLastEncryptedPartLen points to the location that holds the length of the last encrypted data part. 3852
C_EncryptFinal uses the convention described in Section 5.2 on producing output. 3853
The encryption operation MUST have been initialized with C_EncryptInit. A call to C_EncryptFinal 3854 always terminates the active encryption operation unless it returns CKR_BUFFER_TOO_SMALL or is a 3855 successful call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the 3856 ciphertext. 3857
For some multi-part encryption mechanisms, the input plaintext data has certain length constraints, 3858 because the mechanism’s input data MUST consist of an integral number of blocks. If these constraints 3859 are not satisfied, then C_EncryptFinal will fail with return code CKR_DATA_LEN_RANGE. 3860
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 3861 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, 3862 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, 3863 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 3864 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 3865
Example: 3866
#define PLAINTEXT_BUF_SZ 200 3867
#define CIPHERTEXT_BUF_SZ 256 3868
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 112 of 168
3869
CK_ULONG firstPieceLen, secondPieceLen; 3870
CK_SESSION_HANDLE hSession; 3871
CK_OBJECT_HANDLE hKey; 3872
CK_BYTE iv[8]; 3873
CK_MECHANISM mechanism = { 3874
CKM_DES_CBC_PAD, iv, sizeof(iv) 3875
}; 3876
CK_BYTE data[PLAINTEXT_BUF_SZ]; 3877
CK_BYTE encryptedData[CIPHERTEXT_BUF_SZ]; 3878
CK_ULONG ulEncryptedData1Len; 3879
CK_ULONG ulEncryptedData2Len; 3880
CK_ULONG ulEncryptedData3Len; 3881
CK_RV rv; 3882
3883
. 3884
. 3885
firstPieceLen = 90; 3886
secondPieceLen = PLAINTEXT_BUF_SZ-firstPieceLen; 3887
rv = C_EncryptInit(hSession, &mechanism, hKey); 3888
if (rv == CKR_OK) { 3889
/* Encrypt first piece */ 3890
ulEncryptedData1Len = sizeof(encryptedData); 3891
rv = C_EncryptUpdate( 3892
hSession, 3893
&data[0], firstPieceLen, 3894
&encryptedData[0], &ulEncryptedData1Len); 3895
if (rv != CKR_OK) { 3896
. 3897
. 3898
} 3899
3900
/* Encrypt second piece */ 3901
ulEncryptedData2Len = sizeof(encryptedData)-ulEncryptedData1Len; 3902
rv = C_EncryptUpdate( 3903
hSession, 3904
&data[firstPieceLen], secondPieceLen, 3905
&encryptedData[ulEncryptedData1Len], &ulEncryptedData2Len); 3906
if (rv != CKR_OK) { 3907
. 3908
. 3909
} 3910
3911
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 113 of 168
/* Get last little encrypted bit */ 3912
ulEncryptedData3Len = 3913
sizeof(encryptedData)-ulEncryptedData1Len-ulEncryptedData2Len; 3914
rv = C_EncryptFinal( 3915
hSession, 3916
&encryptedData[ulEncryptedData1Len+ulEncryptedData2Len], 3917
&ulEncryptedData3Len); 3918
if (rv != CKR_OK) { 3919
. 3920
. 3921
} 3922
} 3923
5.9 Message-based encryption functions 3924
Message-based encryption refers to the process of encrypting multiple messages using the same 3925 encryption mechanism and encryption key. The encryption mechanism can be either an authenticated 3926 encryption with associated data (AEAD) algorithm or a pure encryption algorithm. 3927
Cryptoki provides the following functions for message-based encryption: 3928
5.9.1 C_MessageEncryptInit 3929
CK_DECLARE_FUNCTION(CK_RV, C_MessageEncryptInit)( 3930 CK_SESSION_HANDLE hSession, 3931 CK_MECHANISM_PTR pMechanism, 3932 CK_OBJECT_HANDLE hKey 3933 ); 3934
C_MessageEncryptInit prepares a session for one or more encryption operations that use the same 3935 encryption mechanism and encryption key. hSession is the session’s handle; pMechanism points to the 3936 encryption mechanism; hKey is the handle of the encryption key. 3937
The CKA_ENCRYPT attribute of the encryption key, which indicates whether the key supports encryption, 3938 MUST be CK_TRUE. 3939
After calling C_MessageEncryptInit, the application can either call C_EncryptMessage to encrypt a 3940 message in a single part, or call C_EncryptMessageBegin, followed by C_EncryptMessageNext one or 3941 more times, to encrypt a message in multiple parts. This may be repeated several times. The message-3942 based encryption process is active until the application calls C_MessageEncryptFinal to finish the 3943 message-based encryption process. 3944
C_MessageEncryptInit can be called with pMechanism set to NULL_PTR to terminate a message-based 3945 encryption process. If a multi-part message encryption operation is active, it will also be terminated. If an 3946 active operation has been initialized and it cannot be cancelled, CKR_OPERATION_CANCEL_FAILED 3947 must be returned. 3948
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 3949 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 3950 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED, 3951 CKR_KEY_HANDLE_INVALID, CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, 3952 CKR_MECHANISM_INVALID, CKR_MECHANISM_PARAM_INVALID, CKR_OK, 3953 CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, 3954 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 3955 CKR_OPERATION_CANCEL_FAILED. 3956
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 114 of 168
5.9.2 C_EncryptMessage 3957
CK_DECLARE_FUNCTION(CK_RV, C_EncryptMessage)( 3958 CK_SESSION_HANDLE hSession, 3959 CK_VOID_PTR pParameter, 3960 CK_ULONG ulParameterLen, 3961 CK_BYTE_PTR pAssociatedData, 3962 CK_ULONG ulAssociatedDataLen, 3963 CK_BYTE_PTR pPlaintext, 3964 CK_ULONG ulPlaintextLen, 3965 CK_BYTE_PTR pCiphertext, 3966 CK_ULONG_PTR pulCiphertextLen 3967 ); 3968
C_EncryptMessage encrypts a message in a single part. hSession is the session’s handle; pParameter 3969 and ulParameterLen specify any mechanism-specific parameters for the message encryption operation; 3970 pAssociatedData and ulAssociatedDataLen specify the associated data for an AEAD mechanism; 3971 pPlaintext points to the plaintext data; ulPlaintextLen is the length in bytes of the plaintext data; 3972 pCiphertext points to the location that receives the encrypted data; pulCiphertextLen points to the location 3973 that holds the length in bytes of the encrypted data. 3974
Typically, pParameter is an initialization vector (IV) or nonce. Depending on the mechanism parameter 3975 passed to C_MessageEncryptInit, pParameter may be either an input or an output parameter. For 3976 example, if the mechanism parameter specifies an IV generator mechanism, the IV generated by the IV 3977 generator will be output to the pParameter buffer. 3978
If the encryption mechanism is not AEAD, pAssociatedData and ulAssociatedDataLen are not used and 3979 should be set to (NULL, 0). 3980
C_EncryptMessage uses the convention described in Section 5.2 on producing output. 3981
The message-based encryption process MUST have been initialized with C_MessageEncryptInit. A call 3982 to C_EncryptMessage begins and terminates a message encryption operation. 3983
C_EncryptMessage cannot be called in the middle of a multi-part message encryption operation. 3984
For some encryption mechanisms, the input plaintext data has certain length constraints (either because 3985 the mechanism can only encrypt relatively short pieces of plaintext, or because the mechanism’s input 3986 data MUST consist of an integral number of blocks). If these constraints are not satisfied, then 3987 C_EncryptMessage will fail with return code CKR_DATA_LEN_RANGE. The plaintext and ciphertext can 3988 be in the same place, i.e., it is OK if pPlaintext and pCiphertext point to the same location. 3989
For most mechanisms, C_EncryptMessage is equivalent to C_EncryptMessageBegin followed by a 3990 sequence of C_EncryptMessageNext operations. 3991
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 3992 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_INVALID, CKR_DATA_LEN_RANGE, 3993 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 3994 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 3995 CKR_HOST_MEMORY, CKR_OK, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 3996
5.9.3 C_EncryptMessageBegin 3997
CK_DECLARE_FUNCTION(CK_RV, C_EncryptMessageBegin)( 3998 CK_SESSION_HANDLE hSession, 3999 CK_VOID_PTR pParameter, 4000 CK_ULONG ulParameterLen, 4001 CK_BYTE_PTR pAssociatedData, 4002 CK_ULONG ulAssociatedDataLen 4003
); 4004
C_EncryptMessageBegin begins a multiple-part message encryption operation. hSession is the 4005 session’s handle; pParameter and ulParameterLen specify any mechanism-specific parameters for the 4006
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 115 of 168
message encryption operation; pAssociatedData and ulAssociatedDataLen specify the associated data 4007 for an AEAD mechanism. 4008
Typically, pParameter is an initialization vector (IV) or nonce. Depending on the mechanism parameter 4009 passed to C_MessageEncryptInit, pParameter may be either an input or an output parameter. For 4010 example, if the mechanism parameter specifies an IV generator mechanism, the IV generated by the IV 4011 generator will be output to the pParameter buffer. 4012
If the mechanism is not AEAD, pAssociatedData and ulAssociatedDataLen are not used and should be 4013 set to (NULL, 0). 4014
After calling C_EncryptMessageBegin, the application should call C_EncryptMessageNext one or 4015 more times to encrypt the message in multiple parts. The message encryption operation is active until the 4016 application uses a call to C_EncryptMessageNext with flags=CKF_END_OF_MESSAGE to actually 4017 obtain the final piece of ciphertext. To process additional messages (in single or multiple parts), the 4018 application MUST call C_EncryptMessage or C_EncryptMessageBegin again. 4019
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4020 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4021 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_ACTIVE, 4022 CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 4023 CKR_USER_NOT_LOGGED_IN. 4024
5.9.4 C_EncryptMessageNext 4025
CK_DECLARE_FUNCTION(CK_RV, C_EncryptMessageNext)( 4026 CK_SESSION_HANDLE hSession, 4027 CK_VOID_PTR pParameter, 4028 CK_ULONG ulParameterLen, 4029 CK_BYTE_PTR pPlaintextPart, 4030 CK_ULONG ulPlaintextPartLen, 4031 CK_BYTE_PTR pCiphertextPart, 4032 CK_ULONG_PTR pulCiphertextPartLen, 4033 CK_FLAGS flags 4034 ); 4035
C_EncryptMessageNext continues a multiple-part message encryption operation, processing another 4036 message part. hSession is the session’s handle; pParameter and ulParameterLen specify any 4037 mechanism-specific parameters for the message encryption operation; pPlaintextPart points to the 4038 plaintext message part; ulPlaintextPartLen is the length of the plaintext message part; pCiphertextPart 4039 points to the location that receives the encrypted message part; pulCiphertextPartLen points to the 4040 location that holds the length in bytes of the encrypted message part; flags is set to 0 if there is more 4041 plaintext data to follow, or set to CKF_END_OF_MESSAGE if this is the last plaintext part. 4042
Typically, pParameter is an initialization vector (IV) or nonce. Depending on the mechanism parameter 4043 passed to C_EncryptMessageNext, pParameter may be either an input or an output parameter. For 4044 example, if the mechanism parameter specifies an IV generator mechanism, the IV generated by the IV 4045 generator will be output to the pParameter buffer. 4046
C_EncryptMessageNext uses the convention described in Section 5.2 on producing output. 4047
The message encryption operation MUST have been started with C_EncryptMessageBegin. This 4048 function may be called any number of times in succession. A call to C_EncryptMessageNext with flags=0 4049 which results in an error other than CKR_BUFFER_TOO_SMALL terminates the current message 4050 encryption operation. A call to C_EncryptMessageNext with flags=CKF_END_OF_MESSAGE always 4051 terminates the active message encryption operation unless it returns CKR_BUFFER_TOO_SMALL or is a 4052 successful call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the 4053 ciphertext. 4054
Although the last C_EncryptMessageNext call ends the encryption of a message, it does not finish the 4055 message-based encryption process. Additional C_EncryptMessage or C_EncryptMessageBegin and 4056 C_EncryptMessageNext calls may be made on the session. 4057
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 116 of 168
The plaintext and ciphertext can be in the same place, i.e., it is OK if pPlaintextPart and pCiphertextPart 4058 point to the same location. 4059
For some multi-part encryption mechanisms, the input plaintext data has certain length constraints, 4060 because the mechanism’s input data MUST consist of an integral number of blocks. If these constraints 4061 are not satisfied when the final message part is supplied (i.e., with flags=CKF_END_OF_MESSAGE), 4062 then C_EncryptMessageNext will fail with return code CKR_DATA_LEN_RANGE. 4063
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4064 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, 4065 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, 4066 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 4067 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 4068
5.9.5 C_ MessageEncryptFinal 4069
CK_DECLARE_FUNCTION(CK_RV, C_EncryptMessageNext)( 4070 CK_SESSION_HANDLE hSession 4071 ); 4072
C_MessageEncryptFinal finishes a message-based encryption process. hSession is the session’s 4073 handle. 4074
The message-based encryption process MUST have been initialized with C_MessageEncryptInit. 4075
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4076 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4077 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4078
CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4079 CKR_SESSION_HANDLE_INVALID. 4080
Example: 4081
#define PLAINTEXT_BUF_SZ 200 4082
#define AUTH_BUF_SZ 100 4083
#define CIPHERTEXT_BUF_SZ 256 4084
4085
CK_SESSION_HANDLE hSession; 4086
CK_OBJECT_HANDLE hKey; 4087
CK_BYTE iv[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 }; 4088
CK_BYTE tag[16]; 4089
CK_GCM_MESSAGE_PARAMS gcmParams = { 4090
iv, 4091
sizeof(iv) * 8, 4092
0, 4093
CKG_NO_GENERATE, 4094
tag, 4095
sizeof(tag) * 8 4096
}; 4097
CK_MECHANISM mechanism = { 4098
CKM_AES_GCM, &gcmParams, sizeof(gcmParams) 4099
}; 4100
CK_BYTE data[2][PLAINTEXT_BUF_SZ]; 4101
CK_BYTE auth[2][AUTH_BUF_SZ]; 4102
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 117 of 168
CK_BYTE encryptedData[2][CIPHERTEXT_BUF_SZ]; 4103
CK_ULONG ulEncryptedDataLen, ulFirstEncryptedDataLen; 4104
CK_ULONG firstPieceLen = PLAINTEXT_BUF_SZ / 2; 4105
4106
/* error handling is omitted for better readability */ 4107
. 4108
. 4109
C_MessageEncryptInit(hSession, &mechanism, hKey); 4110
/* encrypt message en bloc with given IV */ 4111
ulEncryptedDataLen = sizeof(encryptedData[0]); 4112
C_EncryptMessage(hSession, 4113
&gcmParams, sizeof(gcmParams), 4114
&auth[0][0], sizeof(auth[0]), 4115
&data[0][0], sizeof(data[0]), 4116
&encryptedData[0][0], &ulEncryptedDataLen); 4117
/* iv and tag are set now for message */ 4118
4119
/* encrypt message in two steps with generated IV */ 4120
gcmParams.ivGenerator = CKG_GENERATE; 4121
C_EncryptMessageBegin(hSession, 4122
&gcmParams, sizeof(gcmParams), 4123
&auth[1][0], sizeof(auth[1]) 4124
); 4125
/* encrypt first piece */ 4126
ulFirstEncryptedDataLen = sizeof(encryptedData[1]); 4127
C_EncryptMessageNext(hSession, 4128
&gcmParams, sizeof(gcmParams), 4129
&data[1][0], firstPieceLen, 4130
&encryptedData[1][0], &ulFirstEncryptedDataLen, 4131
0 4132
); 4133
/* encrypt second piece */ 4134
ulEncryptedDataLen = sizeof(encryptedData[1]) - ulFirstEncryptedDataLen; 4135
C_EncryptMessageNext(hSession, 4136
&gcmParams, sizeof(gcmParams), 4137
&data[1][firstPieceLen], sizeof(data[1])-firstPieceLen, 4138
&encryptedData[1][ulFirstEncryptedDataLen], &ulEncryptedDataLen, 4139
CKF_END_OF_MESSAGE 4140
); 4141
/* tag is set now for message */ 4142
4143
/* finalize */ 4144
C_MessageEncryptFinal(hSession); 4145
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 118 of 168
5.10 Decryption functions 4146
Cryptoki provides the following functions for decrypting data: 4147
5.10.1 C_DecryptInit 4148
CK_DECLARE_FUNCTION(CK_RV, C_DecryptInit)( 4149 CK_SESSION_HANDLE hSession, 4150 CK_MECHANISM_PTR pMechanism, 4151 CK_OBJECT_HANDLE hKey 4152 ); 4153
C_DecryptInit initializes a decryption operation. hSession is the session’s handle; pMechanism points to 4154 the decryption mechanism; hKey is the handle of the decryption key. 4155
The CKA_DECRYPT attribute of the decryption key, which indicates whether the key supports 4156 decryption, MUST be CK_TRUE. 4157
After calling C_DecryptInit, the application can either call C_Decrypt to decrypt data in a single part; or 4158 call C_DecryptUpdate zero or more times, followed by C_DecryptFinal, to decrypt data in multiple parts. 4159 The decryption operation is active until the application uses a call to C_Decrypt or C_DecryptFinal to 4160 actually obtain the final piece of plaintext. To process additional data (in single or multiple parts), the 4161 application MUST call C_DecryptInit again. 4162
C_DecryptInit can be called with pMechanism set to NULL_PTR to terminate an active decryption 4163 operation. If an active operation cannot be cancelled, CKR_OPERATION_CANCEL_FAILED must be 4164 returned. 4165
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4166 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4167 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4168 CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED, CKR_KEY_HANDLE_INVALID, 4169 CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 4170 CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 4171 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4172 CKR_OPERATION_CANCEL_FAILED. 4173
Example: see C_DecryptFinal. 4174
5.10.2 C_Decrypt 4175
CK_DECLARE_FUNCTION(CK_RV, C_Decrypt)( 4176 CK_SESSION_HANDLE hSession, 4177 CK_BYTE_PTR pEncryptedData, 4178 CK_ULONG ulEncryptedDataLen, 4179 CK_BYTE_PTR pData, 4180 CK_ULONG_PTR pulDataLen 4181 ); 4182
C_Decrypt decrypts encrypted data in a single part. hSession is the session’s handle; pEncryptedData 4183 points to the encrypted data; ulEncryptedDataLen is the length of the encrypted data; pData points to the 4184 location that receives the recovered data; pulDataLen points to the location that holds the length of the 4185 recovered data. 4186
C_Decrypt uses the convention described in Section 5.2 on producing output. 4187
The decryption operation MUST have been initialized with C_DecryptInit. A call to C_Decrypt always 4188 terminates the active decryption operation unless it returns CKR_BUFFER_TOO_SMALL or is a 4189 successful call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the 4190 plaintext. 4191
C_Decrypt cannot be used to terminate a multi-part operation, and MUST be called after C_DecryptInit 4192 without intervening C_DecryptUpdate calls. 4193
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 119 of 168
The ciphertext and plaintext can be in the same place, i.e., it is OK if pEncryptedData and pData point to 4194 the same location. 4195
If the input ciphertext data cannot be decrypted because it has an inappropriate length, then either 4196 CKR_ENCRYPTED_DATA_INVALID or CKR_ENCRYPTED_DATA_LEN_RANGE may be returned. 4197
For most mechanisms, C_Decrypt is equivalent to a sequence of C_DecryptUpdate operations followed 4198 by C_DecryptFinal. 4199
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4200 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4201 CKR_DEVICE_REMOVED, CKR_ENCRYPTED_DATA_INVALID, 4202 CKR_ENCRYPTED_DATA_LEN_RANGE, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4203 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 4204 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 4205
Example: see C_DecryptFinal for an example of similar functions. 4206
5.10.3 C_DecryptUpdate 4207
CK_DECLARE_FUNCTION(CK_RV, C_DecryptUpdate)( 4208 CK_SESSION_HANDLE hSession, 4209 CK_BYTE_PTR pEncryptedPart, 4210 CK_ULONG ulEncryptedPartLen, 4211 CK_BYTE_PTR pPart, 4212 CK_ULONG_PTR pulPartLen 4213 ); 4214
C_DecryptUpdate continues a multiple-part decryption operation, processing another encrypted data 4215 part. hSession is the session’s handle; pEncryptedPart points to the encrypted data part; 4216 ulEncryptedPartLen is the length of the encrypted data part; pPart points to the location that receives the 4217 recovered data part; pulPartLen points to the location that holds the length of the recovered data part. 4218
C_DecryptUpdate uses the convention described in Section 5.2 on producing output. 4219
The decryption operation MUST have been initialized with C_DecryptInit. This function may be called 4220 any number of times in succession. A call to C_DecryptUpdate which results in an error other than 4221 CKR_BUFFER_TOO_SMALL terminates the current decryption operation. 4222
The ciphertext and plaintext can be in the same place, i.e., it is OK if pEncryptedPart and pPart point to 4223 the same location. 4224
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4225 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4226 CKR_DEVICE_REMOVED, CKR_ENCRYPTED_DATA_INVALID, 4227 CKR_ENCRYPTED_DATA_LEN_RANGE, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4228 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 4229 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 4230
Example: See C_DecryptFinal. 4231
5.10.4 C_DecryptFinal 4232
CK_DECLARE_FUNCTION(CK_RV, C_DecryptFinal)( 4233 CK_SESSION_HANDLE hSession, 4234 CK_BYTE_PTR pLastPart, 4235 CK_ULONG_PTR pulLastPartLen 4236 ); 4237
C_DecryptFinal finishes a multiple-part decryption operation. hSession is the session’s handle; 4238 pLastPart points to the location that receives the last recovered data part, if any; pulLastPartLen points to 4239 the location that holds the length of the last recovered data part. 4240
C_DecryptFinal uses the convention described in Section 5.2 on producing output. 4241
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 120 of 168
The decryption operation MUST have been initialized with C_DecryptInit. A call to C_DecryptFinal 4242 always terminates the active decryption operation unless it returns CKR_BUFFER_TOO_SMALL or is a 4243 successful call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the 4244 plaintext. 4245
If the input ciphertext data cannot be decrypted because it has an inappropriate length, then either 4246 CKR_ENCRYPTED_DATA_INVALID or CKR_ENCRYPTED_DATA_LEN_RANGE may be returned. 4247
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4248 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4249 CKR_DEVICE_REMOVED, CKR_ENCRYPTED_DATA_INVALID, 4250 CKR_ENCRYPTED_DATA_LEN_RANGE, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4251 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 4252 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 4253
Example: 4254
#define CIPHERTEXT_BUF_SZ 256 4255
#define PLAINTEXT_BUF_SZ 256 4256
4257
CK_ULONG firstEncryptedPieceLen, secondEncryptedPieceLen; 4258
CK_SESSION_HANDLE hSession; 4259
CK_OBJECT_HANDLE hKey; 4260
CK_BYTE iv[8]; 4261
CK_MECHANISM mechanism = { 4262
CKM_DES_CBC_PAD, iv, sizeof(iv) 4263
}; 4264
CK_BYTE data[PLAINTEXT_BUF_SZ]; 4265
CK_BYTE encryptedData[CIPHERTEXT_BUF_SZ]; 4266
CK_ULONG ulData1Len, ulData2Len, ulData3Len; 4267
CK_RV rv; 4268
4269
. 4270
. 4271
firstEncryptedPieceLen = 90; 4272
secondEncryptedPieceLen = CIPHERTEXT_BUF_SZ-firstEncryptedPieceLen; 4273
rv = C_DecryptInit(hSession, &mechanism, hKey); 4274
if (rv == CKR_OK) { 4275
/* Decrypt first piece */ 4276
ulData1Len = sizeof(data); 4277
rv = C_DecryptUpdate( 4278
hSession, 4279
&encryptedData[0], firstEncryptedPieceLen, 4280
&data[0], &ulData1Len); 4281
if (rv != CKR_OK) { 4282
. 4283
. 4284
} 4285
4286
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 121 of 168
/* Decrypt second piece */ 4287
ulData2Len = sizeof(data)-ulData1Len; 4288
rv = C_DecryptUpdate( 4289
hSession, 4290
&encryptedData[firstEncryptedPieceLen], 4291
secondEncryptedPieceLen, 4292
&data[ulData1Len], &ulData2Len); 4293
if (rv != CKR_OK) { 4294
. 4295
. 4296
} 4297
4298
/* Get last little decrypted bit */ 4299
ulData3Len = sizeof(data)-ulData1Len-ulData2Len; 4300
rv = C_DecryptFinal( 4301
hSession, 4302
&data[ulData1Len+ulData2Len], &ulData3Len); 4303
if (rv != CKR_OK) { 4304
. 4305
. 4306
} 4307
} 4308
5.11 Message-based decryption functions 4309
Message-based decryption refers to the process of decrypting multiple encrypted messages using the 4310 same decryption mechanism and decryption key. The decryption mechanism can be either an 4311 authenticated encryption with associated data (AEAD) algorithm or a pure encryption algorithm. 4312
Cryptoki provides the following functions for message-based decryption. 4313
5.11.1 C_MessageDecryptInit 4314
CK_DECLARE_FUNCTION(CK_RV, C_MessageDecryptInit)( 4315 CK_SESSION_HANDLE hSession, 4316 CK_MECHANISM_PTR pMechanism, 4317 CK_OBJECT_HANDLE hKey 4318 ); 4319
C_MessageDecryptInit initializes a message-based decryption process, preparing a session for one or 4320 more decryption operations that use the same decryption mechanism and decryption key. hSession is 4321 the session’s handle; pMechanism points to the decryption mechanism; hKey is the handle of the 4322 decryption key. 4323
The CKA_DECRYPT attribute of the decryption key, which indicates whether the key supports decryption, 4324 MUST be CK_TRUE. 4325
After calling C_MessageDecryptInit, the application can either call C_DecryptMessage to decrypt an 4326 encrypted message in a single part; or call C_DecryptMessageBegin, followed by 4327 C_DecryptMessageNext one or more times, to decrypt an encrypted message in multiple parts. This 4328 may be repeated several times. The message-based decryption process is active until the application 4329 uses a call to C_MessageDecryptFinal to finish the message-based decryption process. 4330
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 122 of 168
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4331 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4332 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4333 CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED, CKR_KEY_HANDLE_INVALID, 4334 CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 4335 CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 4336 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4337 CKR_OPERATION_CANCEL_FAILED. 4338
5.11.2 C_DecryptMessage 4339
CK_DECLARE_FUNCTION(CK_RV, C_DecryptMessage)( 4340 CK_SESSION_HANDLE hSession, 4341 CK_VOID_PTR pParameter, 4342 CK_ULONG ulParameterLen, 4343 CK_BYTE_PTR pAssociatedData, 4344 CK_ULONG ulAssociatedDataLen, 4345 CK_BYTE_PTR pCiphertext, 4346 CK_ULONG ulCiphertextLen, 4347 CK_BYTE_PTR pPlaintext, 4348 CK_ULONG_PTR pulPlaintextLen 4349 ); 4350
C_DecryptMessage decrypts an encrypted message in a single part. hSession is the session’s handle; 4351 pParameter and ulParameterLen specify any mechanism-specific parameters for the message decryption 4352 operation; pAssociatedData and ulAssociatedDataLen specify the associated data for an AEAD 4353 mechanism; pCiphertext points to the encrypted message; ulCiphertextLen is the length of the encrypted 4354 message; pPlaintext points to the location that receives the recovered message; pulPlaintextLen points to 4355 the location that holds the length of the recovered message. 4356
Typically, pParameter is an initialization vector (IV) or nonce. Unlike the pParameter parameter of 4357 C_EncryptMessage, pParameter is always an input parameter. 4358
If the decryption mechanism is not AEAD, pAssociatedData and ulAssociatedDataLen are not used and 4359 should be set to (NULL, 0). 4360
C_DecryptMessage uses the convention described in Section 5.2 on producing output. 4361
The message-based decryption process MUST have been initialized with C_MessageDecryptInit. A call 4362 to C_DecryptMessage begins and terminates a message decryption operation. 4363
C_DecryptMessage cannot be called in the middle of a multi-part message decryption operation. 4364
The ciphertext and plaintext can be in the same place, i.e., it is OK if pCiphertext and pPlaintext point to 4365 the same location. 4366
If the input ciphertext data cannot be decrypted because it has an inappropriate length, then either 4367 CKR_ENCRYPTED_DATA_INVALID or CKR_ENCRYPTED_DATA_LEN_RANGE may be returned. 4368
If the decryption mechanism is an AEAD algorithm and the authenticity of the associated data or 4369 ciphertext cannot be verified, then CKR_AEAD_DECRYPT_FAILED is returned. 4370
For most mechanisms, C_DecryptMessage is equivalent to C_DecryptMessageBegin followed by a 4371 sequence of C_DecryptMessageNext operations. 4372
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4373 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4374 CKR_DEVICE_REMOVED, CKR_ENCRYPTED_DATA_INVALID, 4375 CKR_ENCRYPTED_DATA_LEN_RANGE, CKR_AEAD_DECRYPT_FAILED, 4376 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4377 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4378 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4379 CKR_OPERATION_CANCEL_FAILED. 4380
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 123 of 168
5.11.3 C_DecryptMessageBegin 4381
CK_DECLARE_FUNCTION(CK_RV, C_DecryptMessageBegin)( 4382 CK_SESSION_HANDLE hSession, 4383 CK_VOID_PTR pParameter, 4384 CK_ULONG ulParameterLen, 4385 CK_BYTE_PTR pAssociatedData, 4386 CK_ULONG ulAssociatedDataLen 4387 ); 4388
C_DecryptMessageBegin begins a multiple-part message decryption operation. hSession is the 4389 session’s handle; pParameter and ulParameterLen specify any mechanism-specific parameters for the 4390 message decryption operation; pAssociatedData and ulAssociatedDataLen specify the associated data 4391 for an AEAD mechanism. 4392
Typically, pParameter is an initialization vector (IV) or nonce. Unlike the pParameter parameter of 4393 C_EncryptMessageBegin, pParameter is always an input parameter. 4394
If the decryption mechanism is not AEAD, pAssociatedData and ulAssociatedDataLen are not used and 4395 should be set to (NULL, 0). 4396
After calling C_DecryptMessageBegin, the application should call C_DecryptMessageNext one or 4397 more times to decrypt the encrypted message in multiple parts. The message decryption operation is 4398 active until the application uses a call to C_DecryptMessageNext with flags=CKF_END_OF_MESSAGE 4399 to actually obtain the final piece of plaintext. To process additional encrypted messages (in single or 4400 multiple parts), the application MUST call C_DecryptMessage or C_DecryptMessageBegin again. 4401
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4402 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4403 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4404 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 4405 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 4406
5.11.4 C_DecryptMessageNext 4407
CK_DECLARE_FUNCTION(CK_RV, C_DecryptMessageNext)( 4408 CK_SESSION_HANDLE hSession, 4409 CK_VOID_PTR pParameter, 4410 CK_ULONG ulParameterLen, 4411 CK_BYTE_PTR pCiphertextPart, 4412 CK_ULONG ulCiphertextPartLen, 4413 CK_BYTE_PTR pPlaintextPart, 4414 CK_ULONG_PTR pulPlaintextPartLen, 4415 CK_FLAGS flags 4416 ); 4417
C_DecryptMessageNext continues a multiple-part message decryption operation, processing another 4418 encrypted message part. hSession is the session’s handle; pParameter and ulParameterLen specify any 4419 mechanism-specific parameters for the message decryption operation; pCiphertextPart points to the 4420 encrypted message part; ulCiphertextPartLen is the length of the encrypted message part; pPlaintextPart 4421 points to the location that receives the recovered message part; pulPlaintextPartLen points to the location 4422 that holds the length of the recovered message part; flags is set to 0 if there is more ciphertext data to 4423 follow, or set to CKF_END_OF_MESSAGE if this is the last ciphertext part. 4424
Typically, pParameter is an initialization vector (IV) or nonce. Unlike the pParameter parameter of 4425 C_EncryptMessageNext, pParameter is always an input parameter. 4426
C_DecryptMessageNext uses the convention described in Section 5.2 on producing output. 4427
The message decryption operation MUST have been started with C_DecryptMessageBegin. This 4428 function may be called any number of times in succession. A call to C_DecryptMessageNext with 4429 flags=0 which results in an error other than CKR_BUFFER_TOO_SMALL terminates the current message 4430 decryption operation. A call to C_DecryptMessageNext with flags=CKF_END_OF_MESSAGE always 4431
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 124 of 168
terminates the active message decryption operation unless it returns CKR_BUFFER_TOO_SMALL or is a 4432 successful call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the 4433 plaintext. 4434
The ciphertext and plaintext can be in the same place, i.e., it is OK if pCiphertextPart and pPlaintextPart 4435 point to the same location. 4436
Although the last C_DecryptMessageNext call ends the decryption of a message, it does not finish the 4437 message-based decryption process. Additional C_DecryptMessage or C_DecryptMessageBegin and 4438 C_DecryptMessageNext calls may be made on the session. 4439
If the input ciphertext data cannot be decrypted because it has an inappropriate length, then either 4440 CKR_ENCRYPTED_DATA_INVALID or CKR_ENCRYPTED_DATA_LEN_RANGE may be returned by 4441 the last C_DecryptMessageNext call. 4442
If the decryption mechanism is an AEAD algorithm and the authenticity of the associated data or 4443 ciphertext cannot be verified, then CKR_AEAD_DECRYPT_FAILED is returned by the last 4444 C_DecryptMessageNext call. 4445
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4446 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4447 CKR_DEVICE_REMOVED, CKR_ENCRYPTED_DATA_INVALID, 4448 CKR_ENCRYPTED_DATA_LEN_RANGE, CKR_AEAD_DECRYPT_FAILED, 4449 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4450 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4451 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 4452
5.11.5 C_MessageDecryptFinal 4453
CK_DECLARE_FUNCTION(CK_RV, C_MessageDecryptFinal)( 4454 CK_SESSION_HANDLE hSession 4455 ); 4456
C_MessageDecryptFinal finishes a message-based decryption process. hSession is the session’s 4457 handle. 4458
The message-based decryption process MUST have been initialized with C_MessageDecryptInit. 4459
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4460 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4461 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4462 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4463 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 4464
5.12 Message digesting functions 4465
Cryptoki provides the following functions for digesting data: 4466
5.12.1 C_DigestInit 4467
CK_DECLARE_FUNCTION(CK_RV, C_DigestInit)( 4468 CK_SESSION_HANDLE hSession, 4469 CK_MECHANISM_PTR pMechanism 4470 ); 4471
C_DigestInit initializes a message-digesting operation. hSession is the session’s handle; pMechanism 4472 points to the digesting mechanism. 4473
After calling C_DigestInit, the application can either call C_Digest to digest data in a single part; or call 4474 C_DigestUpdate zero or more times, followed by C_DigestFinal, to digest data in multiple parts. The 4475 message-digesting operation is active until the application uses a call to C_Digest or C_DigestFinal to 4476 actually obtain the message digest. To process additional data (in single or multiple parts), the 4477 application MUST call C_DigestInit again. 4478
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 125 of 168
C_DigestInit can be called with pMechanism set to NULL_PTR to terminate an active message-digesting 4479 operation. If an operation has been initialized and it cannot be cancelled, 4480 CKR_OPERATION_CANCEL_FAILED must be returned. 4481
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4482 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4483 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4484 CKR_HOST_MEMORY, CKR_MECHANISM_INVALID, CKR_MECHANISM_PARAM_INVALID, 4485 CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, 4486 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4487 CKR_OPERATION_CANCEL_FAILED. 4488
Example: see C_DigestFinal. 4489
5.12.2 C_Digest 4490
CK_DECLARE_FUNCTION(CK_RV, C_Digest)( 4491 CK_SESSION_HANDLE hSession, 4492 CK_BYTE_PTR pData, 4493 CK_ULONG ulDataLen, 4494 CK_BYTE_PTR pDigest, 4495 CK_ULONG_PTR pulDigestLen 4496 ); 4497
C_Digest digests data in a single part. hSession is the session’s handle, pData points to the data; 4498 ulDataLen is the length of the data; pDigest points to the location that receives the message digest; 4499 pulDigestLen points to the location that holds the length of the message digest. 4500
C_Digest uses the convention described in Section 5.2 on producing output. 4501
The digest operation MUST have been initialized with C_DigestInit. A call to C_Digest always 4502 terminates the active digest operation unless it returns CKR_BUFFER_TOO_SMALL or is a successful 4503 call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the message 4504 digest. 4505
C_Digest cannot be used to terminate a multi-part operation, and MUST be called after C_DigestInit 4506 without intervening C_DigestUpdate calls. 4507
The input data and digest output can be in the same place, i.e., it is OK if pData and pDigest point to the 4508 same location. 4509
C_Digest is equivalent to a sequence of C_DigestUpdate operations followed by C_DigestFinal. 4510
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4511 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4512 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4513 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 4514 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 4515
Example: see C_DigestFinal for an example of similar functions. 4516
5.12.3 C_DigestUpdate 4517
CK_DECLARE_FUNCTION(CK_RV, C_DigestUpdate)( 4518 CK_SESSION_HANDLE hSession, 4519 CK_BYTE_PTR pPart, 4520 CK_ULONG ulPartLen 4521 ); 4522
C_DigestUpdate continues a multiple-part message-digesting operation, processing another data part. 4523 hSession is the session’s handle, pPart points to the data part; ulPartLen is the length of the data part. 4524
The message-digesting operation MUST have been initialized with C_DigestInit. Calls to this function 4525 and C_DigestKey may be interspersed any number of times in any order. A call to C_DigestUpdate 4526 which results in an error terminates the current digest operation. 4527
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 126 of 168
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4528 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4529 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4530 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4531 CKR_SESSION_HANDLE_INVALID. 4532
Example: see C_DigestFinal. 4533
5.12.4 C_DigestKey 4534
CK_DECLARE_FUNCTION(CK_RV, C_DigestKey)( 4535 CK_SESSION_HANDLE hSession, 4536 CK_OBJECT_HANDLE hKey 4537 ); 4538
C_DigestKey continues a multiple-part message-digesting operation by digesting the value of a secret 4539 key. hSession is the session’s handle; hKey is the handle of the secret key to be digested. 4540
The message-digesting operation MUST have been initialized with C_DigestInit. Calls to this function 4541 and C_DigestUpdate may be interspersed any number of times in any order. 4542
If the value of the supplied key cannot be digested purely for some reason related to its length, 4543 C_DigestKey should return the error code CKR_KEY_SIZE_RANGE. 4544
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4545 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4546 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_KEY_HANDLE_INVALID, 4547 CKR_KEY_INDIGESTIBLE, CKR_KEY_SIZE_RANGE, CKR_OK, 4548 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 4549
Example: see C_DigestFinal. 4550
5.12.5 C_DigestFinal 4551
CK_DECLARE_FUNCTION(CK_RV, C_DigestFinal)( 4552 CK_SESSION_HANDLE hSession, 4553 CK_BYTE_PTR pDigest, 4554 CK_ULONG_PTR pulDigestLen 4555 ); 4556
C_DigestFinal finishes a multiple-part message-digesting operation, returning the message digest. 4557 hSession is the session’s handle; pDigest points to the location that receives the message digest; 4558 pulDigestLen points to the location that holds the length of the message digest. 4559
C_DigestFinal uses the convention described in Section 5.2 on producing output. 4560
The digest operation MUST have been initialized with C_DigestInit. A call to C_DigestFinal always 4561 terminates the active digest operation unless it returns CKR_BUFFER_TOO_SMALL or is a successful 4562 call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the message 4563 digest. 4564
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4565 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4566 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4567 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 4568 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 4569
Example: 4570
CK_SESSION_HANDLE hSession; 4571
CK_OBJECT_HANDLE hKey; 4572
CK_MECHANISM mechanism = { 4573
CKM_MD5, NULL_PTR, 0 4574
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 127 of 168
}; 4575
CK_BYTE data[] = {...}; 4576
CK_BYTE digest[16]; 4577
CK_ULONG ulDigestLen; 4578
CK_RV rv; 4579
4580
. 4581
. 4582
rv = C_DigestInit(hSession, &mechanism); 4583
if (rv != CKR_OK) { 4584
. 4585
. 4586
} 4587
4588
rv = C_DigestUpdate(hSession, data, sizeof(data)); 4589
if (rv != CKR_OK) { 4590
. 4591
. 4592
} 4593
4594
rv = C_DigestKey(hSession, hKey); 4595
if (rv != CKR_OK) { 4596
. 4597
. 4598
} 4599
4600
ulDigestLen = sizeof(digest); 4601
rv = C_DigestFinal(hSession, digest, &ulDigestLen); 4602
. 4603
. 4604
5.13 Signing and MACing functions 4605
Cryptoki provides the following functions for signing data (for the purposes of Cryptoki, these operations 4606 also encompass message authentication codes). 4607
5.13.1 C_SignInit 4608
CK_DECLARE_FUNCTION(CK_RV, C_SignInit)( 4609 CK_SESSION_HANDLE hSession, 4610 CK_MECHANISM_PTR pMechanism, 4611 CK_OBJECT_HANDLE hKey 4612 ); 4613
C_SignInit initializes a signature operation, where the signature is an appendix to the data. hSession is 4614 the session’s handle; pMechanism points to the signature mechanism; hKey is the handle of the signature 4615 key. 4616
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 128 of 168
The CKA_SIGN attribute of the signature key, which indicates whether the key supports signatures with 4617 appendix, MUST be CK_TRUE. 4618
After calling C_SignInit, the application can either call C_Sign to sign in a single part; or call 4619 C_SignUpdate one or more times, followed by C_SignFinal, to sign data in multiple parts. The signature 4620 operation is active until the application uses a call to C_Sign or C_SignFinal to actually obtain the 4621 signature. To process additional data (in single or multiple parts), the application MUST call C_SignInit 4622 again. 4623
C_SignInit can be called with pMechanism set to NULL_PTR to terminate an active signature operation. 4624 If an operation has been initialized and it cannot be cancelled, CKR_OPERATION_CANCEL_FAILED 4625 must be returned. 4626
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4627 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4628 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4629 CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED,CKR_KEY_HANDLE_INVALID, 4630 CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 4631 CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 4632 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4633 CKR_OPERATION_CANCEL_FAILED. 4634
Example: see C_SignFinal. 4635
5.13.2 C_Sign 4636
CK_DECLARE_FUNCTION(CK_RV, C_Sign)( 4637 CK_SESSION_HANDLE hSession, 4638 CK_BYTE_PTR pData, 4639 CK_ULONG ulDataLen, 4640 CK_BYTE_PTR pSignature, 4641 CK_ULONG_PTR pulSignatureLen 4642 ); 4643
C_Sign signs data in a single part, where the signature is an appendix to the data. hSession is the 4644 session’s handle; pData points to the data; ulDataLen is the length of the data; pSignature points to the 4645 location that receives the signature; pulSignatureLen points to the location that holds the length of the 4646 signature. 4647
C_Sign uses the convention described in Section 5.2 on producing output. 4648
The signing operation MUST have been initialized with C_SignInit. A call to C_Sign always terminates 4649 the active signing operation unless it returns CKR_BUFFER_TOO_SMALL or is a successful call (i.e., 4650 one which returns CKR_OK) to determine the length of the buffer needed to hold the signature. 4651
C_Sign cannot be used to terminate a multi-part operation, and MUST be called after C_SignInit without 4652 intervening C_SignUpdate calls. 4653
For most mechanisms, C_Sign is equivalent to a sequence of C_SignUpdate operations followed by 4654 C_SignFinal. 4655
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4656 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_INVALID, CKR_DATA_LEN_RANGE, 4657 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4658 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4659 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4660 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, CKR_FUNCTION_REJECTED, 4661 CKR_TOKEN_RESOURCE_EXCEEDED. 4662
Example: see C_SignFinal for an example of similar functions. 4663
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 129 of 168
5.13.3 C_SignUpdate 4664
CK_DECLARE_FUNCTION(CK_RV, C_SignUpdate)( 4665 CK_SESSION_HANDLE hSession, 4666 CK_BYTE_PTR pPart, 4667 CK_ULONG ulPartLen 4668 ); 4669
C_SignUpdate continues a multiple-part signature operation, processing another data part. hSession is 4670 the session’s handle, pPart points to the data part; ulPartLen is the length of the data part. 4671
The signature operation MUST have been initialized with C_SignInit. This function may be called any 4672 number of times in succession. A call to C_SignUpdate which results in an error terminates the current 4673 signature operation. 4674
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4675 CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4676 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4677 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 4678 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4679 CKR_TOKEN_RESOURCE_EXCEEDED. 4680
Example: see C_SignFinal. 4681
5.13.4 C_SignFinal 4682
CK_DECLARE_FUNCTION(CK_RV, C_SignFinal)( 4683 CK_SESSION_HANDLE hSession, 4684 CK_BYTE_PTR pSignature, 4685 CK_ULONG_PTR pulSignatureLen 4686 ); 4687
C_SignFinal finishes a multiple-part signature operation, returning the signature. hSession is the 4688 session’s handle; pSignature points to the location that receives the signature; pulSignatureLen points to 4689 the location that holds the length of the signature. 4690
C_SignFinal uses the convention described in Section 5.2 on producing output. 4691
The signing operation MUST have been initialized with C_SignInit. A call to C_SignFinal always 4692 terminates the active signing operation unless it returns CKR_BUFFER_TOO_SMALL or is a successful 4693 call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the signature. 4694
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4695 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, 4696 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, 4697 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 4698 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 4699 CKR_USER_NOT_LOGGED_IN, CKR_FUNCTION_REJECTED, 4700 CKR_TOKEN_RESOURCE_EXCEEDED. 4701
Example: 4702
CK_SESSION_HANDLE hSession; 4703
CK_OBJECT_HANDLE hKey; 4704
CK_MECHANISM mechanism = { 4705
CKM_DES_MAC, NULL_PTR, 0 4706
}; 4707
CK_BYTE data[] = {...}; 4708
CK_BYTE mac[4]; 4709
CK_ULONG ulMacLen; 4710
CK_RV rv; 4711
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 130 of 168
4712
. 4713
. 4714
rv = C_SignInit(hSession, &mechanism, hKey); 4715
if (rv == CKR_OK) { 4716
rv = C_SignUpdate(hSession, data, sizeof(data)); 4717
. 4718
. 4719
ulMacLen = sizeof(mac); 4720
rv = C_SignFinal(hSession, mac, &ulMacLen); 4721
. 4722
. 4723
} 4724
5.13.5 C_SignRecoverInit 4725
CK_DECLARE_FUNCTION(CK_RV, C_SignRecoverInit)( 4726 CK_SESSION_HANDLE hSession, 4727 CK_MECHANISM_PTR pMechanism, 4728 CK_OBJECT_HANDLE hKey 4729 ); 4730
C_SignRecoverInit initializes a signature operation, where the data can be recovered from the signature. 4731 hSession is the session’s handle; pMechanism points to the structure that specifies the signature 4732 mechanism; hKey is the handle of the signature key. 4733
The CKA_SIGN_RECOVER attribute of the signature key, which indicates whether the key supports 4734 signatures where the data can be recovered from the signature, MUST be CK_TRUE. 4735
After calling C_SignRecoverInit, the application may call C_SignRecover to sign in a single part. The 4736 signature operation is active until the application uses a call to C_SignRecover to actually obtain the 4737 signature. To process additional data in a single part, the application MUST call C_SignRecoverInit 4738 again. 4739
C_SignRecoverInit can be called with pMechanism set to NULL_PTR to terminate an active signature 4740 with data recovery operation. If an active operation has been initialized and it cannot be cancelled, 4741 CKR_OPERATION_CANCEL_FAILED must be returned. 4742
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4743 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4744 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4745 CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED, CKR_KEY_HANDLE_INVALID, 4746 CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 4747 CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 4748 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4749 CKR_OPERATION_CANCEL_FAILED. 4750
Example: see C_SignRecover. 4751
5.13.6 C_SignRecover 4752
CK_DECLARE_FUNCTION(CK_RV, C_SignRecover)( 4753 CK_SESSION_HANDLE hSession, 4754 CK_BYTE_PTR pData, 4755 CK_ULONG ulDataLen, 4756 CK_BYTE_PTR pSignature, 4757
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 131 of 168
CK_ULONG_PTR pulSignatureLen 4758 ); 4759
C_SignRecover signs data in a single operation, where the data can be recovered from the signature. 4760 hSession is the session’s handle; pData points to the data; uLDataLen is the length of the data; 4761 pSignature points to the location that receives the signature; pulSignatureLen points to the location that 4762 holds the length of the signature. 4763
C_SignRecover uses the convention described in Section 5.2 on producing output. 4764
The signing operation MUST have been initialized with C_SignRecoverInit. A call to C_SignRecover 4765 always terminates the active signing operation unless it returns CKR_BUFFER_TOO_SMALL or is a 4766 successful call (i.e., one which returns CKR_OK) to determine the length of the buffer needed to hold the 4767 signature. 4768
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4769 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_INVALID, CKR_DATA_LEN_RANGE, 4770 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4771 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4772 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4773 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4774 CKR_TOKEN_RESOURCE_EXCEEDED. 4775
Example: 4776
CK_SESSION_HANDLE hSession; 4777
CK_OBJECT_HANDLE hKey; 4778
CK_MECHANISM mechanism = { 4779
CKM_RSA_9796, NULL_PTR, 0 4780
}; 4781
CK_BYTE data[] = {...}; 4782
CK_BYTE signature[128]; 4783
CK_ULONG ulSignatureLen; 4784
CK_RV rv; 4785
4786
. 4787
. 4788
rv = C_SignRecoverInit(hSession, &mechanism, hKey); 4789
if (rv == CKR_OK) { 4790
ulSignatureLen = sizeof(signature); 4791
rv = C_SignRecover( 4792
hSession, data, sizeof(data), signature, &ulSignatureLen); 4793
if (rv == CKR_OK) { 4794
. 4795
. 4796
} 4797
} 4798
4799
5.14 Message-based signing and MACing functions 4800
Message-based signature refers to the process of signing multiple messages using the same signature 4801 mechanism and signature key. 4802
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 132 of 168
Cryptoki provides the following functions for for signing messages (for the purposes of Cryptoki, these 4803 operations also encompass message authentication codes). 4804
5.14.1 C_MessageSignInit 4805
CK_DECLARE_FUNCTION(CK_RV, C_MessageSignInit)( 4806
CK_SESSION_HANDLE hSession, 4807
CK_MECHANISM_PTR pMechanism, 4808
CK_OBJECT_HANDLE hKey 4809
); 4810
C_MessageSignInit initializes a message-based signature process, preparing a session for one or more 4811 signature operations (where the signature is an appendix to the data) that use the same signature 4812 mechanism and signature key. hSession is the session’s handle; pMechanism points to the signature 4813 mechanism; hKey is the handle of the signature key. 4814
The CKA_SIGN attribute of the signature key, which indicates whether the key supports signatures with 4815 appendix, MUST be CK_TRUE. 4816
After calling C_MessageSignInit, the application can either call C_SignMessage to sign a message in a 4817 single part; or call C_SignMessageBegin, followed by C_SignMessageNext one or more times, to sign 4818 a message in multiple parts. This may be repeated several times. The message-based signature process 4819 is active until the application calls C_MessageSignFinal to finish the message-based signature process. 4820
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4821 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4822 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4823 CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED,CKR_KEY_HANDLE_INVALID, 4824 CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 4825 CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 4826 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 4827
5.14.2 C_SignMessage 4828
CK_DECLARE_FUNCTION(CK_RV, C_SignMessage)( 4829
CK_SESSION_HANDLE hSession, 4830
CK_VOID_PTR pParameter, 4831
CK_ULONG ulParameterLen, 4832
CK_BYTE_PTR pData, 4833
CK_ULONG ulDataLen, 4834
CK_BYTE_PTR pSignature, 4835
CK_ULONG_PTR pulSignatureLen 4836
); 4837
C_SignMessage signs a message in a single part, where the signature is an appendix to the message. 4838 C_MessageSignInit must previously been called on the session. hSession is the session’s handle; 4839 pParameter and ulParameterLen specify any mechanism-specific parameters for the message signature 4840 operation; pData points to the data; ulDataLen is the length of the data; pSignature points to the location 4841 that receives the signature; pulSignatureLen points to the location that holds the length of the signature. 4842
Depending on the mechanism parameter passed to C_MessageSignInit, pParameter may be either an 4843 input or an output parameter. 4844
C_SignMessage uses the convention described in Section 5.2 on producing output. 4845
The message-based signing process MUST have been initialized with C_MessageSignInit. A call to 4846 C_SignMessage begins and terminates a message signing operation unless it returns 4847
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 133 of 168
CKR_BUFFER_TOO_SMALL to determine the length of the buffer needed to hold the signature, or is a 4848 successful call (i.e., one which returns CKR_OK). 4849
C_SignMessage cannot be called in the middle of a multi-part message signing operation. 4850
C_SignMessage does not finish the message-based signing process. Additional C_SignMessage or 4851 C_SignMessageBegin and C_SignMessageNext calls may be made on the session. 4852
For most mechanisms, C_SignMessage is equivalent to C_SignMessageBegin followed by a sequence 4853 of C_SignMessageNext operations. 4854
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4855 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_INVALID, CKR_DATA_LEN_RANGE, 4856 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4857 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4858 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4859 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, CKR_FUNCTION_REJECTED, 4860 CKR_TOKEN_RESOURCE_EXCEEDED. 4861
5.14.3 C_SignMessageBegin 4862
CK_DECLARE_FUNCTION(CK_RV, C_SignMessageBegin)( 4863
CK_SESSION_HANDLE hSession, 4864
CK_VOID_PTR pParameter, 4865
CK_ULONG ulParameterLen 4866
); 4867
C_SignMessageBegin begins a multiple-part message signature operation, where the signature is an 4868 appendix to the message. C_MessageSignInit must previously been called on the session. hSession is 4869 the session’s handle; pParameter and ulParameterLen specify any mechanism-specific parameters for 4870 the message signature operation. 4871
Depending on the mechanism parameter passed to C_MessageSignInit, pParameter may be either an 4872 input or an output parameter. 4873
After calling C_SignMessageBegin, the application should call C_SignMessageNext one or more times 4874 to sign the message in multiple parts. The message signature operation is active until the application 4875 uses a call to C_SignMessageNext with a non-NULL pulSignatureLen to actually obtain the signature. 4876 To process additional messages (in single or multiple parts), the application MUST call C_SignMessage 4877 or C_SignMessageBegin again. 4878
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4879 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4880 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4881 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 4882 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4883 CKR_TOKEN_RESOURCE_EXCEEDED. 4884
5.14.4 C_SignMessageNext 4885
CK_DECLARE_FUNCTION(CK_RV, C_SignMessageNext)( 4886
CK_SESSION_HANDLE hSession, 4887
CK_VOID_PTR pParameter, 4888
CK_ULONG ulParameterLen, 4889
CK_BYTE_PTR pDataPart, 4890
CK_ULONG ulDataPartLen, 4891
CK_BYTE_PTR pSignature, 4892
CK_ULONG_PTR pulSignatureLen 4893
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 134 of 168
); 4894
C_SignMessageNext continues a multiple-part message signature operation, processing another data 4895 part, or finishes a multiple-part message signature operation, returning the signature. hSession is the 4896 session’s handle, pDataPart points to the data part; pParameter and ulParameterLen specify any 4897 mechanism-specific parameters for the message signature operation; ulDataPartLen is the length of the 4898 data part; pSignature points to the location that receives the signature; pulSignatureLen points to the 4899 location that holds the length of the signature. 4900
The pulSignatureLen argument is set to NULL if there is more data part to follow, or set to a non-NULL 4901 value (to receive the signature length) if this is the last data part. 4902
C_SignMessageNext uses the convention described in Section 5.2 on producing output. 4903
The message signing operation MUST have been started with C_SignMessageBegin. This function may 4904 be called any number of times in succession. A call to C_SignMessageNext with a NULL 4905 pulSignatureLen which results in an error terminates the current message signature operation. A call to 4906 C_SignMessageNext with a non-NULL pulSignatureLen always terminates the active message signing 4907 operation unless it returns CKR_BUFFER_TOO_SMALL to determine the length of the buffer needed to 4908 hold the signature, or is a successful call (i.e., one which returns CKR_OK). 4909
Although the last C_SignMessageNext call ends the signing of a message, it does not finish the 4910 message-based signing process. Additional C_SignMessage or C_SignMessageBegin and 4911 C_SignMessageNext calls may be made on the session. 4912
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 4913 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, 4914 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, 4915 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 4916 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 4917 CKR_USER_NOT_LOGGED_IN, CKR_FUNCTION_REJECTED, 4918 CKR_TOKEN_RESOURCE_EXCEEDED. 4919
5.14.5 C_MessageSignFinal 4920
CK_DECLARE_FUNCTION(CK_RV, C_MessageSignFinal)( 4921
CK_SESSION_HANDLE hSession 4922
); 4923
C_MessageSignFinal finishes a message-based signing process. hSession is the session’s handle. 4924
The message-based signing process MUST have been initialized with C_MessageSignInit. 4925
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4926 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4927 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4928 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 4929 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, CKR_FUNCTION_REJECTED, 4930 CKR_TOKEN_RESOURCE_EXCEEDED. 4931
5.15 Functions for verifying signatures and MACs 4932
Cryptoki provides the following functions for verifying signatures on data (for the purposes of Cryptoki, 4933 these operations also encompass message authentication codes): 4934
5.15.1 C_VerifyInit 4935
CK_DECLARE_FUNCTION(CK_RV, C_VerifyInit)( 4936 CK_SESSION_HANDLE hSession, 4937 CK_MECHANISM_PTR pMechanism, 4938 CK_OBJECT_HANDLE hKey 4939 ); 4940
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 135 of 168
C_VerifyInit initializes a verification operation, where the signature is an appendix to the data. hSession 4941 is the session’s handle; pMechanism points to the structure that specifies the verification mechanism; 4942 hKey is the handle of the verification key. 4943
The CKA_VERIFY attribute of the verification key, which indicates whether the key supports verification 4944 where the signature is an appendix to the data, MUST be CK_TRUE. 4945
After calling C_VerifyInit, the application can either call C_Verify to verify a signature on data in a single 4946 part; or call C_VerifyUpdate one or more times, followed by C_VerifyFinal, to verify a signature on data 4947 in multiple parts. The verification operation is active until the application calls C_Verify or C_VerifyFinal. 4948 To process additional data (in single or multiple parts), the application MUST call C_VerifyInit again. 4949
C_VerifyInit can be called with pMechanism set to NULL_PTR to terminate an active verification 4950 operation. If an active operation has been initialized and it cannot be cancelled, 4951 CKR_OPERATION_CANCEL_FAILED must be returned. 4952
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 4953 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 4954 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 4955 CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED, CKR_KEY_HANDLE_INVALID, 4956 CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 4957 CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 4958 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 4959 CKR_OPERATION_CANCEL_FAILED. 4960
Example: see C_VerifyFinal. 4961
5.15.2 C_Verify 4962
CK_DECLARE_FUNCTION(CK_RV, C_Verify)( 4963 CK_SESSION_HANDLE hSession, 4964 CK_BYTE_PTR pData, 4965 CK_ULONG ulDataLen, 4966 CK_BYTE_PTR pSignature, 4967 CK_ULONG ulSignatureLen 4968 ); 4969
C_Verify verifies a signature in a single-part operation, where the signature is an appendix to the data. 4970 hSession is the session’s handle; pData points to the data; ulDataLen is the length of the data; 4971 pSignature points to the signature; ulSignatureLen is the length of the signature. 4972
The verification operation MUST have been initialized with C_VerifyInit. A call to C_Verify always 4973 terminates the active verification operation. 4974
A successful call to C_Verify should return either the value CKR_OK (indicating that the supplied 4975 signature is valid) or CKR_SIGNATURE_INVALID (indicating that the supplied signature is invalid). If the 4976 signature can be seen to be invalid purely on the basis of its length, then 4977 CKR_SIGNATURE_LEN_RANGE should be returned. In any of these cases, the active signing operation 4978 is terminated. 4979
C_Verify cannot be used to terminate a multi-part operation, and MUST be called after C_VerifyInit 4980 without intervening C_VerifyUpdate calls. 4981
For most mechanisms, C_Verify is equivalent to a sequence of C_VerifyUpdate operations followed by 4982 C_VerifyFinal. 4983
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_INVALID, 4984 CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 4985 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 4986 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 4987 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_SIGNATURE_INVALID, 4988 CKR_SIGNATURE_LEN_RANGE, CKR_TOKEN_RESOURCE_EXCEEDED. 4989
Example: see C_VerifyFinal for an example of similar functions. 4990
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 136 of 168
5.15.3 C_VerifyUpdate 4991
CK_DECLARE_FUNCTION(CK_RV, C_VerifyUpdate)( 4992 CK_SESSION_HANDLE hSession, 4993 CK_BYTE_PTR pPart, 4994 CK_ULONG ulPartLen 4995 ); 4996
C_VerifyUpdate continues a multiple-part verification operation, processing another data part. hSession 4997 is the session’s handle, pPart points to the data part; ulPartLen is the length of the data part. 4998
The verification operation MUST have been initialized with C_VerifyInit. This function may be called any 4999 number of times in succession. A call to C_VerifyUpdate which results in an error terminates the current 5000 verification operation. 5001
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 5002 CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 5003 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 5004 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 5005 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 5006 CKR_TOKEN_RESOURCE_EXCEEDED. 5007
Example: see C_VerifyFinal. 5008
5.15.4 C_VerifyFinal 5009
CK_DECLARE_FUNCTION(CK_RV, C_VerifyFinal)( 5010 CK_SESSION_HANDLE hSession, 5011 CK_BYTE_PTR pSignature, 5012 CK_ULONG ulSignatureLen 5013 ); 5014
C_VerifyFinal finishes a multiple-part verification operation, checking the signature. hSession is the 5015 session’s handle; pSignature points to the signature; ulSignatureLen is the length of the signature. 5016
The verification operation MUST have been initialized with C_VerifyInit. A call to C_VerifyFinal always 5017 terminates the active verification operation. 5018
A successful call to C_VerifyFinal should return either the value CKR_OK (indicating that the supplied 5019 signature is valid) or CKR_SIGNATURE_INVALID (indicating that the supplied signature is invalid). If the 5020 signature can be seen to be invalid purely on the basis of its length, then 5021 CKR_SIGNATURE_LEN_RANGE should be returned. In any of these cases, the active verifying 5022 operation is terminated. 5023
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 5024 CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 5025 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 5026 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 5027 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_SIGNATURE_INVALID, 5028 CKR_SIGNATURE_LEN_RANGE, CKR_TOKEN_RESOURCE_EXCEEDED. 5029
Example: 5030
CK_SESSION_HANDLE hSession; 5031
CK_OBJECT_HANDLE hKey; 5032
CK_MECHANISM mechanism = { 5033
CKM_DES_MAC, NULL_PTR, 0 5034
}; 5035
CK_BYTE data[] = {...}; 5036
CK_BYTE mac[4]; 5037
CK_RV rv; 5038
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 137 of 168
5039
. 5040
. 5041
rv = C_VerifyInit(hSession, &mechanism, hKey); 5042
if (rv == CKR_OK) { 5043
rv = C_VerifyUpdate(hSession, data, sizeof(data)); 5044
. 5045
. 5046
rv = C_VerifyFinal(hSession, mac, sizeof(mac)); 5047
. 5048
. 5049
} 5050
5.15.5 C_VerifyRecoverInit 5051
CK_DECLARE_FUNCTION(CK_RV, C_VerifyRecoverInit)( 5052 CK_SESSION_HANDLE hSession, 5053 CK_MECHANISM_PTR pMechanism, 5054 CK_OBJECT_HANDLE hKey 5055 ); 5056
C_VerifyRecoverInit initializes a signature verification operation, where the data is recovered from the 5057 signature. hSession is the session’s handle; pMechanism points to the structure that specifies the 5058 verification mechanism; hKey is the handle of the verification key. 5059
The CKA_VERIFY_RECOVER attribute of the verification key, which indicates whether the key supports 5060 verification where the data is recovered from the signature, MUST be CK_TRUE. 5061
After calling C_VerifyRecoverInit, the application may call C_VerifyRecover to verify a signature on 5062 data in a single part. The verification operation is active until the application uses a call to 5063 C_VerifyRecover to actually obtain the recovered message. 5064
C_VerifyRecoverInit can be called with pMechanism set to NULL_PTR to terminate an active verification 5065 with data recovery operation. If an active operations has been initialized and it cannot be cancelled, 5066 CKR_OPERATION_CANCEL_FAILED must be returned. 5067
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 5068 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 5069 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 5070 CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED, CKR_KEY_HANDLE_INVALID, 5071 CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 5072 CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 5073 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 5074 CKR_OPERATION_CANCEL_FAILED. 5075
Example: see C_VerifyRecover. 5076
5.15.6 C_VerifyRecover 5077
CK_DECLARE_FUNCTION(CK_RV, C_VerifyRecover)( 5078 CK_SESSION_HANDLE hSession, 5079 CK_BYTE_PTR pSignature, 5080 CK_ULONG ulSignatureLen, 5081 CK_BYTE_PTR pData, 5082 CK_ULONG_PTR pulDataLen 5083 ); 5084
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 138 of 168
C_VerifyRecover verifies a signature in a single-part operation, where the data is recovered from the 5085 signature. hSession is the session’s handle; pSignature points to the signature; ulSignatureLen is the 5086 length of the signature; pData points to the location that receives the recovered data; and pulDataLen 5087 points to the location that holds the length of the recovered data. 5088
C_VerifyRecover uses the convention described in Section 5.2 on producing output. 5089
The verification operation MUST have been initialized with C_VerifyRecoverInit. A call to 5090 C_VerifyRecover always terminates the active verification operation unless it returns 5091 CKR_BUFFER_TOO_SMALL or is a successful call (i.e., one which returns CKR_OK) to determine the 5092 length of the buffer needed to hold the recovered data. 5093
A successful call to C_VerifyRecover should return either the value CKR_OK (indicating that the 5094 supplied signature is valid) or CKR_SIGNATURE_INVALID (indicating that the supplied signature is 5095 invalid). If the signature can be seen to be invalid purely on the basis of its length, then 5096 CKR_SIGNATURE_LEN_RANGE should be returned. The return codes CKR_SIGNATURE_INVALID 5097 and CKR_SIGNATURE_LEN_RANGE have a higher priority than the return code 5098 CKR_BUFFER_TOO_SMALL, i.e., if C_VerifyRecover is supplied with an invalid signature, it will never 5099 return CKR_BUFFER_TOO_SMALL. 5100
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 5101 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_INVALID, CKR_DATA_LEN_RANGE, 5102 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 5103 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 5104 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, 5105 CKR_SESSION_HANDLE_INVALID, CKR_SIGNATURE_LEN_RANGE, CKR_SIGNATURE_INVALID, 5106 CKR_TOKEN_RESOURCE_EXCEEDED. 5107
Example: 5108
CK_SESSION_HANDLE hSession; 5109
CK_OBJECT_HANDLE hKey; 5110
CK_MECHANISM mechanism = { 5111
CKM_RSA_9796, NULL_PTR, 0 5112
}; 5113
CK_BYTE data[] = {...}; 5114
CK_ULONG ulDataLen; 5115
CK_BYTE signature[128]; 5116
CK_RV rv; 5117
5118
. 5119
. 5120
rv = C_VerifyRecoverInit(hSession, &mechanism, hKey); 5121
if (rv == CKR_OK) { 5122
ulDataLen = sizeof(data); 5123
rv = C_VerifyRecover( 5124
hSession, signature, sizeof(signature), data, &ulDataLen); 5125
. 5126
. 5127
} 5128
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 139 of 168
5.16 Message-based functions for verifying signatures and MACs 5129
Message-based verification refers to the process of verifying signatures on multiple messages using the 5130 same verification mechanism and verification key. 5131
Cryptoki provides the following functions for verifying signatures on messages (for the purposes of 5132 Cryptoki, these operations also encompass message authentication codes). 5133
5.16.1 C_MessageVerifyInit 5134
CK_DECLARE_FUNCTION(CK_RV, C_MessageVerifyInit)( 5135
CK_SESSION_HANDLE hSession, 5136
CK_MECHANISM_PTR pMechanism, 5137
CK_OBJECT_HANDLE hKey 5138
); 5139
C_MessageVerifyInit initializes a message-based verification process, preparing a session for one or 5140 more verification operations (where the signature is an appendix to the data) that use the same 5141 verification mechanism and verification key. hSession is the session’s handle; pMechanism points to the 5142 structure that specifies the verification mechanism; hKey is the handle of the verification key. 5143
The CKA_VERIFY attribute of the verification key, which indicates whether the key supports verification 5144 where the signature is an appendix to the data, MUST be CK_TRUE. 5145
After calling C_MessageVerifyInit, the application can either call C_VerifyMessage to verify a signature 5146 on a message in a single part; or call C_VerifyMessageBegin, followed by C_VerifyMessageNext one 5147 or more times, to verify a signature on a message in multiple parts. This may be repeated several times. 5148 The message-based verification process is active until the application calls C_MessageVerifyFinal to 5149 finish the message-based verification process. 5150
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 5151 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 5152 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 5153 CKR_HOST_MEMORY, CKR_KEY_FUNCTION_NOT_PERMITTED, CKR_KEY_HANDLE_INVALID, 5154 CKR_KEY_SIZE_RANGE, CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 5155 CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 5156 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 5157
5.16.2 C_VerifyMessage 5158
CK_DECLARE_FUNCTION(CK_RV, C_VerifyMessage)( 5159
CK_SESSION_HANDLE hSession, 5160
CK_VOID_PTR pParameter, 5161
CK_ULONG ulParameterLen, 5162
CK_BYTE_PTR pData, 5163
CK_ULONG ulDataLen, 5164
CK_BYTE_PTR pSignature, 5165
CK_ULONG ulSignatureLen 5166
); 5167
C_VerifyMessage verifies a signature on a message in a single part operation, where the signature is an 5168 appendix to the data. C_MessageVerifyInit must previously been called on the session. hSession is the 5169 session’s handle; pParameter and ulParameterLen specify any mechanism-specific parameters for the 5170 message verification operation; pData points to the data; ulDataLen is the length of the data; pSignature 5171 points to the signature; ulSignatureLen is the length of the signature. 5172
Unlike the pParameter parameter of C_SignMessage, pParameter is always an input parameter. 5173
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 140 of 168
The message-based verification process MUST have been initialized with C_MessageVerifyInit. A call to 5174 C_VerifyMessage starts and terminates a message verification operation. 5175
A successful call to C_VerifyMessage should return either the value CKR_OK (indicating that the 5176 supplied signature is valid) or CKR_SIGNATURE_INVALID (indicating that the supplied signature is 5177 invalid). If the signature can be seen to be invalid purely on the basis of its length, then 5178 CKR_SIGNATURE_LEN_RANGE should be returned. 5179
C_VerifyMessage does not finish the message-based verification process. Additional C_VerifyMessage 5180 or C_VerifyMessageBegin and C_VerifyMessageNext calls may be made on the session. 5181
For most mechanisms, C_VerifyMessage is equivalent to C_VerifyMessageBegin followed by a 5182 sequence of C_VerifyMessageNext operations. 5183
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_INVALID, 5184 CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 5185 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 5186 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 5187 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_SIGNATURE_INVALID, 5188 CKR_SIGNATURE_LEN_RANGE, CKR_TOKEN_RESOURCE_EXCEEDED. 5189
5.16.3 C_VerifyMessageBegin 5190
CK_DECLARE_FUNCTION(CK_RV, C_VerifyMessageBegin)( 5191
CK_SESSION_HANDLE hSession, 5192
CK_VOID_PTR pParameter, 5193
CK_ULONG ulParameterLen 5194
); 5195
C_VerifyMessageBegin begins a multiple-part message verification operation, where the signature is an 5196 appendix to the message. C_MessageVerifyInit must previously been called on the session. hSession is 5197 the session’s handle; pParameter and ulParameterLen specify any mechanism-specific parameters for 5198 the message verification operation. 5199
Unlike the pParameter parameter of C_SignMessageBegin, pParameter is always an input parameter. 5200
After calling C_VerifyMessageBegin, the application should call C_VerifyMessageNext one or more 5201 times to verify a signature on a message in multiple parts. The message verification operation is active 5202 until the application calls C_VerifyMessageNext with a non-NULL pSignature. To process additional 5203 messages (in single or multiple parts), the application MUST call C_VerifyMessage or 5204 C_VerifyMessageBegin again. 5205
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 5206 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 5207 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 5208 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 5209 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 5210
5.16.4 C_VerifyMessageNext 5211
CK_DECLARE_FUNCTION(CK_RV, C_VerifyMessageNext)( 5212
CK_SESSION_HANDLE hSession, 5213
CK_VOID_PTR pParameter, 5214
CK_ULONG ulParameterLen, 5215
CK_BYTE_PTR pDataPart, 5216
CK_ULONG ulDataPartLen, 5217
CK_BYTE_PTR pSignature, 5218
CK_ULONG ulSignatureLen 5219
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 141 of 168
); 5220
C_VerifyMessageNext continues a multiple-part message verification operation, processing another data 5221 part, or finishes a multiple-part message verification operation, checking the signature. hSession is the 5222 session’s handle, pParameter and ulParameterLen specify any mechanism-specific parameters for the 5223 message verification operation, pPart points to the data part; ulPartLen is the length of the data part; 5224 pSignature points to the signature; ulSignatureLen is the length of the signature. 5225
The pSignature argument is set to NULL if there is more data part to follow, or set to a non-NULL value 5226 (pointing to the signature to verify) if this is the last data part. 5227
The message verification operation MUST have been started with C_VerifyMessageBegin. This function 5228 may be called any number of times in succession. A call to C_VerifyMessageNext with a NULL 5229 pSignature which results in an error terminates the current message verification operation. A call to 5230 C_VerifyMessageNext with a non-NULL pSignature always terminates the active message verification 5231 operation. 5232
A successful call to C_VerifyMessageNext with a non-NULL pSignature should return either the value 5233 CKR_OK (indicating that the supplied signature is valid) or CKR_SIGNATURE_INVALID (indicating that 5234 the supplied signature is invalid). If the signature can be seen to be invalid purely on the basis of its 5235 length, then CKR_SIGNATURE_LEN_RANGE should be returned. In any of these cases, the active 5236 message verifying operation is terminated. 5237
Although the last C_VerifyMessageNext call ends the verification of a message, it does not finish the 5238 message-based verification process. Additional C_VerifyMessage or C_VerifyMessageBegin and 5239 C_VerifyMessageNext calls may be made on the session. 5240
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 5241 CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 5242 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 5243 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 5244 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_SIGNATURE_INVALID, 5245 CKR_SIGNATURE_LEN_RANGE, CKR_TOKEN_RESOURCE_EXCEEDED. 5246
5.16.5 C_MessageVerifyFinal 5247
CK_DECLARE_FUNCTION(CK_RV,C_MessageVerifyFinal)( 5248
CK_SESSION_HANDLE hSession 5249
); 5250
C_MessageVerifyFinal finishes a message-based verification process. hSession is the session’s handle. 5251
The message-based verification process MUST have been initialized with C_MessageVerifyInit. 5252
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 5253 CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 5254 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 5255 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 5256 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 5257 CKR_TOKEN_RESOURCE_EXCEEDED. 5258
5.17 Dual-function cryptographic functions 5259
Cryptoki provides the following functions to perform two cryptographic operations “simultaneously” within 5260 a session. These functions are provided so as to avoid unnecessarily passing data back and forth to and 5261 from a token. 5262
5.17.1 C_DigestEncryptUpdate 5263
CK_DECLARE_FUNCTION(CK_RV, C_DigestEncryptUpdate)( 5264 CK_SESSION_HANDLE hSession, 5265 CK_BYTE_PTR pPart, 5266
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 142 of 168
CK_ULONG ulPartLen, 5267 CK_BYTE_PTR pEncryptedPart, 5268 CK_ULONG_PTR pulEncryptedPartLen 5269 ); 5270
C_DigestEncryptUpdate continues multiple-part digest and encryption operations, processing another 5271 data part. hSession is the session’s handle; pPart points to the data part; ulPartLen is the length of the 5272 data part; pEncryptedPart points to the location that receives the digested and encrypted data part; 5273 pulEncryptedPartLen points to the location that holds the length of the encrypted data part. 5274
C_DigestEncryptUpdate uses the convention described in Section 5.2 on producing output. If a 5275 C_DigestEncryptUpdate call does not produce encrypted output (because an error occurs, or because 5276 pEncryptedPart has the value NULL_PTR, or because pulEncryptedPartLen is too small to hold the entire 5277 encrypted part output), then no plaintext is passed to the active digest operation. 5278
Digest and encryption operations MUST both be active (they MUST have been initialized with 5279 C_DigestInit and C_EncryptInit, respectively). This function may be called any number of times in 5280 succession, and may be interspersed with C_DigestUpdate, C_DigestKey, and C_EncryptUpdate calls 5281 (it would be somewhat unusual to intersperse calls to C_DigestEncryptUpdate with calls to 5282 C_DigestKey, however). 5283
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 5284 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, 5285 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, 5286 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 5287 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 5288
Example: 5289
#define BUF_SZ 512 5290
5291
CK_SESSION_HANDLE hSession; 5292
CK_OBJECT_HANDLE hKey; 5293
CK_BYTE iv[8]; 5294
CK_MECHANISM digestMechanism = { 5295
CKM_MD5, NULL_PTR, 0 5296
}; 5297
CK_MECHANISM encryptionMechanism = { 5298
CKM_DES_ECB, iv, sizeof(iv) 5299
}; 5300
CK_BYTE encryptedData[BUF_SZ]; 5301
CK_ULONG ulEncryptedDataLen; 5302
CK_BYTE digest[16]; 5303
CK_ULONG ulDigestLen; 5304
CK_BYTE data[(2*BUF_SZ)+8]; 5305
CK_RV rv; 5306
int i; 5307
5308
. 5309
. 5310
memset(iv, 0, sizeof(iv)); 5311
memset(data, ‘A’, ((2*BUF_SZ)+5)); 5312
rv = C_EncryptInit(hSession, &encryptionMechanism, hKey); 5313
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 143 of 168
if (rv != CKR_OK) { 5314
. 5315
. 5316
} 5317
rv = C_DigestInit(hSession, &digestMechanism); 5318
if (rv != CKR_OK) { 5319
. 5320
. 5321
} 5322
5323
ulEncryptedDataLen = sizeof(encryptedData); 5324
rv = C_DigestEncryptUpdate( 5325
hSession, 5326
&data[0], BUF_SZ, 5327
encryptedData, &ulEncryptedDataLen); 5328
. 5329
. 5330
ulEncryptedDataLen = sizeof(encryptedData); 5331
rv = C_DigestEncryptUpdate( 5332
hSession, 5333
&data[BUF_SZ], BUF_SZ, 5334
encryptedData, &ulEncryptedDataLen); 5335
. 5336
. 5337
5338
/* 5339
* The last portion of the buffer needs to be 5340
* handled with separate calls to deal with 5341
* padding issues in ECB mode 5342
*/ 5343
5344
/* First, complete the digest on the buffer */ 5345
rv = C_DigestUpdate(hSession, &data[BUF_SZ*2], 5); 5346
. 5347
. 5348
ulDigestLen = sizeof(digest); 5349
rv = C_DigestFinal(hSession, digest, &ulDigestLen); 5350
. 5351
. 5352
5353
/* Then, pad last part with 3 0x00 bytes, and complete encryption */ 5354
for(i=0;i<3;i++) 5355
data[((BUF_SZ*2)+5)+i] = 0x00; 5356
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 144 of 168
5357
/* Now, get second-to-last piece of ciphertext */ 5358
ulEncryptedDataLen = sizeof(encryptedData); 5359
rv = C_EncryptUpdate( 5360
hSession, 5361
&data[BUF_SZ*2], 8, 5362
encryptedData, &ulEncryptedDataLen); 5363
. 5364
. 5365
5366
/* Get last piece of ciphertext (should have length 0, here) */ 5367
ulEncryptedDataLen = sizeof(encryptedData); 5368
rv = C_EncryptFinal(hSession, encryptedData, &ulEncryptedDataLen); 5369
. 5370
. 5371
5.17.2 C_DecryptDigestUpdate 5372
CK_DECLARE_FUNCTION(CK_RV, C_DecryptDigestUpdate)( 5373 CK_SESSION_HANDLE hSession, 5374 CK_BYTE_PTR pEncryptedPart, 5375 CK_ULONG ulEncryptedPartLen, 5376 CK_BYTE_PTR pPart, 5377 CK_ULONG_PTR pulPartLen 5378 ); 5379
C_DecryptDigestUpdate continues a multiple-part combined decryption and digest operation, 5380 processing another data part. hSession is the session’s handle; pEncryptedPart points to the encrypted 5381 data part; ulEncryptedPartLen is the length of the encrypted data part; pPart points to the location that 5382 receives the recovered data part; pulPartLen points to the location that holds the length of the recovered 5383 data part. 5384
C_DecryptDigestUpdate uses the convention described in Section 5.2 on producing output. If a 5385 C_DecryptDigestUpdate call does not produce decrypted output (because an error occurs, or because 5386 pPart has the value NULL_PTR, or because pulPartLen is too small to hold the entire decrypted part 5387 output), then no plaintext is passed to the active digest operation. 5388
Decryption and digesting operations MUST both be active (they MUST have been initialized with 5389 C_DecryptInit and C_DigestInit, respectively). This function may be called any number of times in 5390 succession, and may be interspersed with C_DecryptUpdate, C_DigestUpdate, and C_DigestKey calls 5391 (it would be somewhat unusual to intersperse calls to C_DigestEncryptUpdate with calls to 5392 C_DigestKey, however). 5393
Use of C_DecryptDigestUpdate involves a pipelining issue that does not arise when using 5394 C_DigestEncryptUpdate, the “inverse function” of C_DecryptDigestUpdate. This is because when 5395 C_DigestEncryptUpdate is called, precisely the same input is passed to both the active digesting 5396 operation and the active encryption operation; however, when C_DecryptDigestUpdate is called, the 5397 input passed to the active digesting operation is the output of the active decryption operation. This issue 5398 comes up only when the mechanism used for decryption performs padding. 5399
In particular, envision a 24-byte ciphertext which was obtained by encrypting an 18-byte plaintext with 5400 DES in CBC mode with PKCS padding. Consider an application which will simultaneously decrypt this 5401 ciphertext and digest the original plaintext thereby obtained. 5402
After initializing decryption and digesting operations, the application passes the 24-byte ciphertext (3 DES 5403 blocks) into C_DecryptDigestUpdate. C_DecryptDigestUpdate returns exactly 16 bytes of plaintext, 5404
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 145 of 168
since at this point, Cryptoki doesn’t know if there’s more ciphertext coming, or if the last block of 5405 ciphertext held any padding. These 16 bytes of plaintext are passed into the active digesting operation. 5406
Since there is no more ciphertext, the application calls C_DecryptFinal. This tells Cryptoki that there’s 5407 no more ciphertext coming, and the call returns the last 2 bytes of plaintext. However, since the active 5408 decryption and digesting operations are linked only through the C_DecryptDigestUpdate call, these 2 5409 bytes of plaintext are not passed on to be digested. 5410
A call to C_DigestFinal, therefore, would compute the message digest of the first 16 bytes of the 5411 plaintext, not the message digest of the entire plaintext. It is crucial that, before C_DigestFinal is called, 5412 the last 2 bytes of plaintext get passed into the active digesting operation via a C_DigestUpdate call. 5413
Because of this, it is critical that when an application uses a padded decryption mechanism with 5414 C_DecryptDigestUpdate, it knows exactly how much plaintext has been passed into the active digesting 5415 operation. Extreme caution is warranted when using a padded decryption mechanism with 5416 C_DecryptDigestUpdate. 5417
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 5418 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 5419 CKR_DEVICE_REMOVED, CKR_ENCRYPTED_DATA_INVALID, 5420 CKR_ENCRYPTED_DATA_LEN_RANGE, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 5421 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 5422 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 5423
Example: 5424
#define BUF_SZ 512 5425
5426
CK_SESSION_HANDLE hSession; 5427
CK_OBJECT_HANDLE hKey; 5428
CK_BYTE iv[8]; 5429
CK_MECHANISM decryptionMechanism = { 5430
CKM_DES_ECB, iv, sizeof(iv) 5431
}; 5432
CK_MECHANISM digestMechanism = { 5433
CKM_MD5, NULL_PTR, 0 5434
}; 5435
CK_BYTE encryptedData[(2*BUF_SZ)+8]; 5436
CK_BYTE digest[16]; 5437
CK_ULONG ulDigestLen; 5438
CK_BYTE data[BUF_SZ]; 5439
CK_ULONG ulDataLen, ulLastUpdateSize; 5440
CK_RV rv; 5441
5442
. 5443
. 5444
memset(iv, 0, sizeof(iv)); 5445
memset(encryptedData, ‘A’, ((2*BUF_SZ)+8)); 5446
rv = C_DecryptInit(hSession, &decryptionMechanism, hKey); 5447
if (rv != CKR_OK) { 5448
. 5449
. 5450
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 146 of 168
} 5451
rv = C_DigestInit(hSession, &digestMechanism); 5452
if (rv != CKR_OK){ 5453
. 5454
. 5455
} 5456
5457
ulDataLen = sizeof(data); 5458
rv = C_DecryptDigestUpdate( 5459
hSession, 5460
&encryptedData[0], BUF_SZ, 5461
data, &ulDataLen); 5462
. 5463
. 5464
ulDataLen = sizeof(data); 5465
rv = C_DecryptDigestUpdate( 5466
hSession, 5467
&encryptedData[BUF_SZ], BUF_SZ, 5468
data, &ulDataLen); 5469
. 5470
. 5471
5472
/* 5473
* The last portion of the buffer needs to be handled with 5474
* separate calls to deal with padding issues in ECB mode 5475
*/ 5476
5477
/* First, complete the decryption of the buffer */ 5478
ulLastUpdateSize = sizeof(data); 5479
rv = C_DecryptUpdate( 5480
hSession, 5481
&encryptedData[BUF_SZ*2], 8, 5482
data, &ulLastUpdateSize); 5483
. 5484
. 5485
/* Get last piece of plaintext (should have length 0, here) */ 5486
ulDataLen = sizeof(data)-ulLastUpdateSize; 5487
rv = C_DecryptFinal(hSession, &data[ulLastUpdateSize], &ulDataLen); 5488
if (rv != CKR_OK) { 5489
. 5490
. 5491
} 5492
5493
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 147 of 168
/* Digest last bit of plaintext */ 5494
rv = C_DigestUpdate(hSession, data, 5); 5495
if (rv != CKR_OK) { 5496
. 5497
. 5498
} 5499
ulDigestLen = sizeof(digest); 5500
rv = C_DigestFinal(hSession, digest, &ulDigestLen); 5501
if (rv != CKR_OK) { 5502
. 5503
. 5504
} 5505
5.17.3 C_SignEncryptUpdate 5506
CK_DECLARE_FUNCTION(CK_RV, C_SignEncryptUpdate)( 5507 CK_SESSION_HANDLE hSession, 5508 CK_BYTE_PTR pPart, 5509 CK_ULONG ulPartLen, 5510 CK_BYTE_PTR pEncryptedPart, 5511 CK_ULONG_PTR pulEncryptedPartLen 5512 ); 5513
C_SignEncryptUpdate continues a multiple-part combined signature and encryption operation, 5514 processing another data part. hSession is the session’s handle; pPart points to the data part; ulPartLen is 5515 the length of the data part; pEncryptedPart points to the location that receives the digested and encrypted 5516 data part; and pulEncryptedPartLen points to the location that holds the length of the encrypted data part. 5517
C_SignEncryptUpdate uses the convention described in Section 5.2 on producing output. If a 5518 C_SignEncryptUpdate call does not produce encrypted output (because an error occurs, or because 5519 pEncryptedPart has the value NULL_PTR, or because pulEncryptedPartLen is too small to hold the entire 5520 encrypted part output), then no plaintext is passed to the active signing operation. 5521
Signature and encryption operations MUST both be active (they MUST have been initialized with 5522 C_SignInit and C_EncryptInit, respectively). This function may be called any number of times in 5523 succession, and may be interspersed with C_SignUpdate and C_EncryptUpdate calls. 5524
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 5525 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, 5526 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, 5527 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, 5528 CKR_OPERATION_NOT_INITIALIZED, CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, 5529 CKR_USER_NOT_LOGGED_IN. 5530
Example: 5531
#define BUF_SZ 512 5532
5533
CK_SESSION_HANDLE hSession; 5534
CK_OBJECT_HANDLE hEncryptionKey, hMacKey; 5535
CK_BYTE iv[8]; 5536
CK_MECHANISM signMechanism = { 5537
CKM_DES_MAC, NULL_PTR, 0 5538
}; 5539
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 148 of 168
CK_MECHANISM encryptionMechanism = { 5540
CKM_DES_ECB, iv, sizeof(iv) 5541
}; 5542
CK_BYTE encryptedData[BUF_SZ]; 5543
CK_ULONG ulEncryptedDataLen; 5544
CK_BYTE MAC[4]; 5545
CK_ULONG ulMacLen; 5546
CK_BYTE data[(2*BUF_SZ)+8]; 5547
CK_RV rv; 5548
int i; 5549
5550
. 5551
. 5552
memset(iv, 0, sizeof(iv)); 5553
memset(data, ‘A’, ((2*BUF_SZ)+5)); 5554
rv = C_EncryptInit(hSession, &encryptionMechanism, hEncryptionKey); 5555
if (rv != CKR_OK) { 5556
. 5557
. 5558
} 5559
rv = C_SignInit(hSession, &signMechanism, hMacKey); 5560
if (rv != CKR_OK) { 5561
. 5562
. 5563
} 5564
5565
ulEncryptedDataLen = sizeof(encryptedData); 5566
rv = C_SignEncryptUpdate( 5567
hSession, 5568
&data[0], BUF_SZ, 5569
encryptedData, &ulEncryptedDataLen); 5570
. 5571
. 5572
ulEncryptedDataLen = sizeof(encryptedData); 5573
rv = C_SignEncryptUpdate( 5574
hSession, 5575
&data[BUF_SZ], BUF_SZ, 5576
encryptedData, &ulEncryptedDataLen); 5577
. 5578
. 5579
5580
/* 5581
* The last portion of the buffer needs to be handled with 5582
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 149 of 168
* separate calls to deal with padding issues in ECB mode 5583
*/ 5584
5585
/* First, complete the signature on the buffer */ 5586
rv = C_SignUpdate(hSession, &data[BUF_SZ*2], 5); 5587
. 5588
. 5589
ulMacLen = sizeof(MAC); 5590
rv = C_SignFinal(hSession, MAC, &ulMacLen); 5591
. 5592
. 5593
5594
/* Then pad last part with 3 0x00 bytes, and complete encryption */ 5595
for(i=0;i<3;i++) 5596
data[((BUF_SZ*2)+5)+i] = 0x00; 5597
5598
/* Now, get second-to-last piece of ciphertext */ 5599
ulEncryptedDataLen = sizeof(encryptedData); 5600
rv = C_EncryptUpdate( 5601
hSession, 5602
&data[BUF_SZ*2], 8, 5603
encryptedData, &ulEncryptedDataLen); 5604
. 5605
. 5606
5607
/* Get last piece of ciphertext (should have length 0, here) */ 5608
ulEncryptedDataLen = sizeof(encryptedData); 5609
rv = C_EncryptFinal(hSession, encryptedData, &ulEncryptedDataLen); 5610
. 5611
. 5612
5.17.4 C_DecryptVerifyUpdate 5613
CK_DECLARE_FUNCTION(CK_RV, C_DecryptVerifyUpdate)( 5614 CK_SESSION_HANDLE hSession, 5615 CK_BYTE_PTR pEncryptedPart, 5616 CK_ULONG ulEncryptedPartLen, 5617 CK_BYTE_PTR pPart, 5618 CK_ULONG_PTR pulPartLen 5619 ); 5620
C_DecryptVerifyUpdate continues a multiple-part combined decryption and verification operation, 5621 processing another data part. hSession is the session’s handle; pEncryptedPart points to the encrypted 5622 data; ulEncryptedPartLen is the length of the encrypted data; pPart points to the location that receives the 5623 recovered data; and pulPartLen points to the location that holds the length of the recovered data. 5624
C_DecryptVerifyUpdate uses the convention described in Section 5.2 on producing output. If a 5625 C_DecryptVerifyUpdate call does not produce decrypted output (because an error occurs, or because 5626
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 150 of 168
pPart has the value NULL_PTR, or because pulPartLen is too small to hold the entire encrypted part 5627 output), then no plaintext is passed to the active verification operation. 5628
Decryption and signature operations MUST both be active (they MUST have been initialized with 5629 C_DecryptInit and C_VerifyInit, respectively). This function may be called any number of times in 5630 succession, and may be interspersed with C_DecryptUpdate and C_VerifyUpdate calls. 5631
Use of C_DecryptVerifyUpdate involves a pipelining issue that does not arise when using 5632 C_SignEncryptUpdate, the “inverse function” of C_DecryptVerifyUpdate. This is because when 5633 C_SignEncryptUpdate is called, precisely the same input is passed to both the active signing operation 5634 and the active encryption operation; however, when C_DecryptVerifyUpdate is called, the input passed 5635 to the active verifying operation is the output of the active decryption operation. This issue comes up only 5636 when the mechanism used for decryption performs padding. 5637
In particular, envision a 24-byte ciphertext which was obtained by encrypting an 18-byte plaintext with 5638 DES in CBC mode with PKCS padding. Consider an application which will simultaneously decrypt this 5639 ciphertext and verify a signature on the original plaintext thereby obtained. 5640
After initializing decryption and verification operations, the application passes the 24-byte ciphertext (3 5641 DES blocks) into C_DecryptVerifyUpdate. C_DecryptVerifyUpdate returns exactly 16 bytes of 5642 plaintext, since at this point, Cryptoki doesn’t know if there’s more ciphertext coming, or if the last block of 5643 ciphertext held any padding. These 16 bytes of plaintext are passed into the active verification operation. 5644
Since there is no more ciphertext, the application calls C_DecryptFinal. This tells Cryptoki that there’s 5645 no more ciphertext coming, and the call returns the last 2 bytes of plaintext. However, since the active 5646 decryption and verification operations are linked only through the C_DecryptVerifyUpdate call, these 2 5647 bytes of plaintext are not passed on to the verification mechanism. 5648
A call to C_VerifyFinal, therefore, would verify whether or not the signature supplied is a valid signature 5649 on the first 16 bytes of the plaintext, not on the entire plaintext. It is crucial that, before C_VerifyFinal is 5650 called, the last 2 bytes of plaintext get passed into the active verification operation via a C_VerifyUpdate 5651 call. 5652
Because of this, it is critical that when an application uses a padded decryption mechanism with 5653 C_DecryptVerifyUpdate, it knows exactly how much plaintext has been passed into the active 5654 verification operation. Extreme caution is warranted when using a padded decryption mechanism with 5655 C_DecryptVerifyUpdate. 5656
Return values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 5657 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DATA_LEN_RANGE, CKR_DEVICE_ERROR, 5658 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_ENCRYPTED_DATA_INVALID, 5659 CKR_ENCRYPTED_DATA_LEN_RANGE, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 5660 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_NOT_INITIALIZED, 5661 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID. 5662
Example: 5663
#define BUF_SZ 512 5664
5665
CK_SESSION_HANDLE hSession; 5666
CK_OBJECT_HANDLE hDecryptionKey, hMacKey; 5667
CK_BYTE iv[8]; 5668
CK_MECHANISM decryptionMechanism = { 5669
CKM_DES_ECB, iv, sizeof(iv) 5670
}; 5671
CK_MECHANISM verifyMechanism = { 5672
CKM_DES_MAC, NULL_PTR, 0 5673
}; 5674
CK_BYTE encryptedData[(2*BUF_SZ)+8]; 5675
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 151 of 168
CK_BYTE MAC[4]; 5676
CK_ULONG ulMacLen; 5677
CK_BYTE data[BUF_SZ]; 5678
CK_ULONG ulDataLen, ulLastUpdateSize; 5679
CK_RV rv; 5680
5681
. 5682
. 5683
memset(iv, 0, sizeof(iv)); 5684
memset(encryptedData, ‘A’, ((2*BUF_SZ)+8)); 5685
rv = C_DecryptInit(hSession, &decryptionMechanism, hDecryptionKey); 5686
if (rv != CKR_OK) { 5687
. 5688
. 5689
} 5690
rv = C_VerifyInit(hSession, &verifyMechanism, hMacKey); 5691
if (rv != CKR_OK){ 5692
. 5693
. 5694
} 5695
5696
ulDataLen = sizeof(data); 5697
rv = C_DecryptVerifyUpdate( 5698
hSession, 5699
&encryptedData[0], BUF_SZ, 5700
data, &ulDataLen); 5701
. 5702
. 5703
ulDataLen = sizeof(data); 5704
rv = C_DecryptVerifyUpdate( 5705
hSession, 5706
&encryptedData[BUF_SZ], BUF_SZ, 5707
data, &ulDataLen); 5708
. 5709
. 5710
5711
/* 5712
* The last portion of the buffer needs to be handled with 5713
* separate calls to deal with padding issues in ECB mode 5714
*/ 5715
5716
/* First, complete the decryption of the buffer */ 5717
ulLastUpdateSize = sizeof(data); 5718
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 152 of 168
rv = C_DecryptUpdate( 5719
hSession, 5720
&encryptedData[BUF_SZ*2], 8, 5721
data, &ulLastUpdateSize); 5722
. 5723
. 5724
/* Get last little piece of plaintext. Should have length 0 */ 5725
ulDataLen = sizeof(data)-ulLastUpdateSize; 5726
rv = C_DecryptFinal(hSession, &data[ulLastUpdateSize], &ulDataLen); 5727
if (rv != CKR_OK) { 5728
. 5729
. 5730
} 5731
5732
/* Send last bit of plaintext to verification operation */ 5733
rv = C_VerifyUpdate(hSession, data, 5); 5734
if (rv != CKR_OK) { 5735
. 5736
. 5737
} 5738
rv = C_VerifyFinal(hSession, MAC, ulMacLen); 5739
if (rv == CKR_SIGNATURE_INVALID) { 5740
. 5741
. 5742
} 5743
5.18 Key management functions 5744
Cryptoki provides the following functions for key management: 5745
5.18.1 C_GenerateKey 5746
CK_DECLARE_FUNCTION(CK_RV, C_GenerateKey)( 5747 CK_SESSION_HANDLE hSession 5748 CK_MECHANISM_PTR pMechanism, 5749 CK_ATTRIBUTE_PTR pTemplate, 5750 CK_ULONG ulCount, 5751 CK_OBJECT_HANDLE_PTR phKey 5752 ); 5753
C_GenerateKey generates a secret key or set of domain parameters, creating a new object. hSession is 5754 the session’s handle; pMechanism points to the generation mechanism; pTemplate points to the template 5755 for the new key or set of domain parameters; ulCount is the number of attributes in the template; phKey 5756 points to the location that receives the handle of the new key or set of domain parameters. 5757
If the generation mechanism is for domain parameter generation, the CKA_CLASS attribute will have the 5758 value CKO_DOMAIN_PARAMETERS; otherwise, it will have the value CKO_SECRET_KEY. 5759
Since the type of key or domain parameters to be generated is implicit in the generation mechanism, the 5760 template does not need to supply a key type. If it does supply a key type which is inconsistent with the 5761
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 153 of 168
generation mechanism, C_GenerateKey fails and returns the error code 5762 CKR_TEMPLATE_INCONSISTENT. The CKA_CLASS attribute is treated similarly. 5763
If a call to C_GenerateKey cannot support the precise template supplied to it, it will fail and return without 5764 creating an object. 5765
The object created by a successful call to C_GenerateKey will have its CKA_LOCAL attribute set to 5766 CK_TRUE. In addition, the object created will have a value for CKA_UNIQUE_ID generated and 5767 assigned (See Section 4.4.1). 5768
Return values: CKR_ARGUMENTS_BAD, CKR_ATTRIBUTE_READ_ONLY, 5769 CKR_ATTRIBUTE_TYPE_INVALID, CKR_ATTRIBUTE_VALUE_INVALID, 5770 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_CURVE_NOT_SUPPORTED, CKR_DEVICE_ERROR, 5771 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, 5772 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, 5773 CKR_MECHANISM_INVALID, CKR_MECHANISM_PARAM_INVALID, CKR_OK, 5774 CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, 5775 CKR_SESSION_HANDLE_INVALID, CKR_SESSION_READ_ONLY, CKR_TEMPLATE_INCOMPLETE, 5776 CKR_TEMPLATE_INCONSISTENT, CKR_TOKEN_WRITE_PROTECTED, 5777 CKR_USER_NOT_LOGGED_IN. 5778
Example: 5779
CK_SESSION_HANDLE hSession; 5780
CK_OBJECT_HANDLE hKey; 5781
CK_MECHANISM mechanism = { 5782
CKM_DES_KEY_GEN, NULL_PTR, 0 5783
}; 5784
CK_RV rv; 5785
5786
. 5787
. 5788
rv = C_GenerateKey(hSession, &mechanism, NULL_PTR, 0, &hKey); 5789
if (rv == CKR_OK) { 5790
. 5791
. 5792
} 5793
5.18.2 C_GenerateKeyPair 5794
CK_DECLARE_FUNCTION(CK_RV, C_GenerateKeyPair)( 5795 CK_SESSION_HANDLE hSession, 5796 CK_MECHANISM_PTR pMechanism, 5797 CK_ATTRIBUTE_PTR pPublicKeyTemplate, 5798 CK_ULONG ulPublicKeyAttributeCount, 5799 CK_ATTRIBUTE_PTR pPrivateKeyTemplate, 5800 CK_ULONG ulPrivateKeyAttributeCount, 5801 CK_OBJECT_HANDLE_PTR phPublicKey, 5802 CK_OBJECT_HANDLE_PTR phPrivateKey 5803 ); 5804
C_GenerateKeyPair generates a public/private key pair, creating new key objects. hSession is the 5805 session’s handle; pMechanism points to the key generation mechanism; pPublicKeyTemplate points to 5806 the template for the public key; ulPublicKeyAttributeCount is the number of attributes in the public-key 5807 template; pPrivateKeyTemplate points to the template for the private key; ulPrivateKeyAttributeCount is 5808 the number of attributes in the private-key template; phPublicKey points to the location that receives the 5809
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 154 of 168
handle of the new public key; phPrivateKey points to the location that receives the handle of the new 5810 private key. 5811
Since the types of keys to be generated are implicit in the key pair generation mechanism, the templates 5812 do not need to supply key types. If one of the templates does supply a key type which is inconsistent with 5813 the key generation mechanism, C_GenerateKeyPair fails and returns the error code 5814 CKR_TEMPLATE_INCONSISTENT. The CKA_CLASS attribute is treated similarly. 5815
If a call to C_GenerateKeyPair cannot support the precise templates supplied to it, it will fail and return 5816 without creating any key objects. 5817
A call to C_GenerateKeyPair will never create just one key and return. A call can fail, and create no 5818 keys; or it can succeed, and create a matching public/private key pair. 5819
The key objects created by a successful call to C_GenerateKeyPair will have their CKA_LOCAL 5820 attributes set to CK_TRUE. In addition, the key objects created will both have values for 5821 CKA_UNIQUE_ID generated and assigned (See Section 4.4.1). 5822
Note carefully the order of the arguments to C_GenerateKeyPair. The last two arguments do not have 5823 the same order as they did in the original Cryptoki Version 1.0 document. The order of these two 5824 arguments has caused some unfortunate confusion. 5825
Return values: CKR_ARGUMENTS_BAD, CKR_ATTRIBUTE_READ_ONLY, 5826 CKR_ATTRIBUTE_TYPE_INVALID, CKR_ATTRIBUTE_VALUE_INVALID, 5827 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_CURVE_NOT_SUPPORTED, CKR_DEVICE_ERROR, 5828 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_DOMAIN_PARAMS_INVALID, 5829 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 5830 CKR_HOST_MEMORY, CKR_MECHANISM_INVALID, CKR_MECHANISM_PARAM_INVALID, 5831 CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, 5832 CKR_SESSION_HANDLE_INVALID, CKR_SESSION_READ_ONLY, CKR_TEMPLATE_INCOMPLETE, 5833 CKR_TEMPLATE_INCONSISTENT, CKR_TOKEN_WRITE_PROTECTED, 5834 CKR_USER_NOT_LOGGED_IN. 5835
Example: 5836
CK_SESSION_HANDLE hSession; 5837
CK_OBJECT_HANDLE hPublicKey, hPrivateKey; 5838
CK_MECHANISM mechanism = { 5839
CKM_RSA_PKCS_KEY_PAIR_GEN, NULL_PTR, 0 5840
}; 5841
CK_ULONG modulusBits = 3072; 5842
CK_BYTE publicExponent[] = { 3 }; 5843
CK_BYTE subject[] = {...}; 5844
CK_BYTE id[] = {123}; 5845
CK_BBOOL true = CK_TRUE; 5846
CK_ATTRIBUTE publicKeyTemplate[] = { 5847
{CKA_ENCRYPT, &true, sizeof(true)}, 5848
{CKA_VERIFY, &true, sizeof(true)}, 5849
{CKA_WRAP, &true, sizeof(true)}, 5850
{CKA_MODULUS_BITS, &modulusBits, sizeof(modulusBits)}, 5851
{CKA_PUBLIC_EXPONENT, publicExponent, sizeof (publicExponent)} 5852
}; 5853
CK_ATTRIBUTE privateKeyTemplate[] = { 5854
{CKA_TOKEN, &true, sizeof(true)}, 5855
{CKA_PRIVATE, &true, sizeof(true)}, 5856
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 155 of 168
{CKA_SUBJECT, subject, sizeof(subject)}, 5857
{CKA_ID, id, sizeof(id)}, 5858
{CKA_SENSITIVE, &true, sizeof(true)}, 5859
{CKA_DECRYPT, &true, sizeof(true)}, 5860
{CKA_SIGN, &true, sizeof(true)}, 5861
{CKA_UNWRAP, &true, sizeof(true)} 5862
}; 5863
CK_RV rv; 5864
5865
rv = C_GenerateKeyPair( 5866
hSession, &mechanism, 5867
publicKeyTemplate, 5, 5868
privateKeyTemplate, 8, 5869
&hPublicKey, &hPrivateKey); 5870
if (rv == CKR_OK) { 5871
. 5872
. 5873
} 5874
5.18.3 C_WrapKey 5875
CK_DECLARE_FUNCTION(CK_RV, C_WrapKey)( 5876 CK_SESSION_HANDLE hSession, 5877 CK_MECHANISM_PTR pMechanism, 5878 CK_OBJECT_HANDLE hWrappingKey, 5879 CK_OBJECT_HANDLE hKey, 5880 CK_BYTE_PTR pWrappedKey, 5881 CK_ULONG_PTR pulWrappedKeyLen 5882 ); 5883
C_WrapKey wraps (i.e., encrypts) a private or secret key. hSession is the session’s handle; pMechanism 5884 points to the wrapping mechanism; hWrappingKey is the handle of the wrapping key; hKey is the handle 5885 of the key to be wrapped; pWrappedKey points to the location that receives the wrapped key; and 5886 pulWrappedKeyLen points to the location that receives the length of the wrapped key. 5887
C_WrapKey uses the convention described in Section 5.2 on producing output. 5888
The CKA_WRAP attribute of the wrapping key, which indicates whether the key supports wrapping, 5889 MUST be CK_TRUE. The CKA_EXTRACTABLE attribute of the key to be wrapped MUST also be 5890 CK_TRUE. 5891
If the key to be wrapped cannot be wrapped for some token-specific reason, despite its having its 5892 CKA_EXTRACTABLE attribute set to CK_TRUE, then C_WrapKey fails with error code 5893 CKR_KEY_NOT_WRAPPABLE. If it cannot be wrapped with the specified wrapping key and mechanism 5894 solely because of its length, then C_WrapKey fails with error code CKR_KEY_SIZE_RANGE. 5895
C_WrapKey can be used in the following situations: 5896
• To wrap any secret key with a public key that supports encryption and decryption. 5897
• To wrap any secret key with any other secret key. Consideration MUST be given to key size and 5898 mechanism strength or the token may not allow the operation. 5899
• To wrap a private key with any secret key. 5900
Of course, tokens vary in which types of keys can actually be wrapped with which mechanisms. 5901
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 156 of 168
To partition the wrapping keys so they can only wrap a subset of extractable keys the attribute 5902 CKA_WRAP_TEMPLATE can be used on the wrapping key to specify an attribute set that will be 5903 compared against the attributes of the key to be wrapped. If all attributes match according to the 5904 C_FindObject rules of attribute matching then the wrap will proceed. The value of this attribute is an 5905 attribute template and the size is the number of items in the template times the size of CK_ATTRIBUTE. If 5906 this attribute is not supplied then any template is acceptable. If an attribute is not present, it will not be 5907 checked. If any attribute mismatch occurs on an attempt to wrap a key then the function SHALL return 5908 CKR_KEY_HANDLE_INVALID. 5909
Return Values: CKR_ARGUMENTS_BAD, CKR_BUFFER_TOO_SMALL, 5910 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 5911 CKR_DEVICE_REMOVED, CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, 5912 CKR_GENERAL_ERROR, CKR_HOST_MEMORY, CKR_KEY_HANDLE_INVALID, 5913 CKR_KEY_NOT_WRAPPABLE, CKR_KEY_SIZE_RANGE, CKR_KEY_UNEXTRACTABLE, 5914 CKR_MECHANISM_INVALID, CKR_MECHANISM_PARAM_INVALID, CKR_OK, 5915 CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, 5916 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN, 5917 CKR_WRAPPING_KEY_HANDLE_INVALID, CKR_WRAPPING_KEY_SIZE_RANGE, 5918 CKR_WRAPPING_KEY_TYPE_INCONSISTENT. 5919
Example: 5920
CK_SESSION_HANDLE hSession; 5921
CK_OBJECT_HANDLE hWrappingKey, hKey; 5922
CK_MECHANISM mechanism = { 5923
CKM_DES3_ECB, NULL_PTR, 0 5924
}; 5925
CK_BYTE wrappedKey[8]; 5926
CK_ULONG ulWrappedKeyLen; 5927
CK_RV rv; 5928
5929
. 5930
. 5931
ulWrappedKeyLen = sizeof(wrappedKey); 5932
rv = C_WrapKey( 5933
hSession, &mechanism, 5934
hWrappingKey, hKey, 5935
wrappedKey, &ulWrappedKeyLen); 5936
if (rv == CKR_OK) { 5937
. 5938
. 5939
} 5940
5.18.4 C_UnwrapKey 5941
CK_DECLARE_FUNCTION(CK_RV, C_UnwrapKey)( 5942 CK_SESSION_HANDLE hSession, 5943 CK_MECHANISM_PTR pMechanism, 5944 CK_OBJECT_HANDLE hUnwrappingKey, 5945 CK_BYTE_PTR pWrappedKey, 5946 CK_ULONG ulWrappedKeyLen, 5947 CK_ATTRIBUTE_PTR pTemplate, 5948
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 157 of 168
CK_ULONG ulAttributeCount, 5949 CK_OBJECT_HANDLE_PTR phKey 5950 ); 5951
C_UnwrapKey unwraps (i.e. decrypts) a wrapped key, creating a new private key or secret key object. 5952 hSession is the session’s handle; pMechanism points to the unwrapping mechanism; hUnwrappingKey is 5953 the handle of the unwrapping key; pWrappedKey points to the wrapped key; ulWrappedKeyLen is the 5954 length of the wrapped key; pTemplate points to the template for the new key; ulAttributeCount is the 5955 number of attributes in the template; phKey points to the location that receives the handle of the 5956 recovered key. 5957
The CKA_UNWRAP attribute of the unwrapping key, which indicates whether the key supports 5958 unwrapping, MUST be CK_TRUE. 5959
The new key will have the CKA_ALWAYS_SENSITIVE attribute set to CK_FALSE, and the 5960 CKA_NEVER_EXTRACTABLE attribute set to CK_FALSE. The CKA_EXTRACTABLE attribute is by 5961 default set to CK_TRUE. 5962
Some mechanisms may modify, or attempt to modify. the contents of the pMechanism structure at the 5963 same time that the key is unwrapped. 5964
If a call to C_UnwrapKey cannot support the precise template supplied to it, it will fail and return without 5965 creating any key object. 5966
The key object created by a successful call to C_UnwrapKey will have its CKA_LOCAL attribute set to 5967 CK_FALSE. In addition, the object created will have a value for CKA_UNIQUE_ID generated and 5968 assigned (See Section 4.4.1). 5969
To partition the unwrapping keys so they can only unwrap a subset of keys the attribute 5970 CKA_UNWRAP_TEMPLATE can be used on the unwrapping key to specify an attribute set that will be 5971 added to attributes of the key to be unwrapped. If the attributes do not conflict with the user supplied 5972 attribute template, in ‘pTemplate’, then the unwrap will proceed. The value of this attribute is an attribute 5973 template and the size is the number of items in the template times the size of CK_ATTRIBUTE. If this 5974 attribute is not present on the unwrapping key then no additional attributes will be added. If any attribute 5975 conflict occurs on an attempt to unwrap a key then the function SHALL return 5976 CKR_TEMPLATE_INCONSISTENT. 5977
Return values: CKR_ARGUMENTS_BAD, CKR_ATTRIBUTE_READ_ONLY, 5978 CKR_ATTRIBUTE_TYPE_INVALID, CKR_ATTRIBUTE_VALUE_INVALID, 5979 CKR_BUFFER_TOO_SMALL, CKR_CRYPTOKI_NOT_INITIALIZED, 5980 CKR_CURVE_NOT_SUPPORTED, CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, 5981 CKR_DEVICE_REMOVED, CKR_DOMAIN_PARAMS_INVALID, CKR_FUNCTION_CANCELED, 5982 CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, 5983 CKR_MECHANISM_INVALID, CKR_MECHANISM_PARAM_INVALID, CKR_OK, 5984 CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, CKR_SESSION_CLOSED, 5985 CKR_SESSION_HANDLE_INVALID, CKR_SESSION_READ_ONLY, CKR_TEMPLATE_INCOMPLETE, 5986 CKR_TEMPLATE_INCONSISTENT, CKR_TOKEN_WRITE_PROTECTED, 5987 CKR_UNWRAPPING_KEY_HANDLE_INVALID, CKR_UNWRAPPING_KEY_SIZE_RANGE, 5988 CKR_UNWRAPPING_KEY_TYPE_INCONSISTENT, CKR_USER_NOT_LOGGED_IN, 5989 CKR_WRAPPED_KEY_INVALID, CKR_WRAPPED_KEY_LEN_RANGE. 5990
Example: 5991
CK_SESSION_HANDLE hSession; 5992
CK_OBJECT_HANDLE hUnwrappingKey, hKey; 5993
CK_MECHANISM mechanism = { 5994
CKM_DES3_ECB, NULL_PTR, 0 5995
}; 5996
CK_BYTE wrappedKey[8] = {...}; 5997
CK_OBJECT_CLASS keyClass = CKO_SECRET_KEY; 5998
CK_KEY_TYPE keyType = CKK_DES; 5999
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 158 of 168
CK_BBOOL true = CK_TRUE; 6000
CK_ATTRIBUTE template[] = { 6001
{CKA_CLASS, &keyClass, sizeof(keyClass)}, 6002
{CKA_KEY_TYPE, &keyType, sizeof(keyType)}, 6003
{CKA_ENCRYPT, &true, sizeof(true)}, 6004
{CKA_DECRYPT, &true, sizeof(true)} 6005
}; 6006
CK_RV rv; 6007
6008
. 6009
. 6010
rv = C_UnwrapKey( 6011
hSession, &mechanism, hUnwrappingKey, 6012
wrappedKey, sizeof(wrappedKey), template, 4, &hKey); 6013
if (rv == CKR_OK) { 6014
. 6015
. 6016
} 6017
5.18.5 C_DeriveKey 6018
CK_DECLARE_FUNCTION(CK_RV, C_DeriveKey)( 6019 CK_SESSION_HANDLE hSession, 6020 CK_MECHANISM_PTR pMechanism, 6021 CK_OBJECT_HANDLE hBaseKey, 6022 CK_ATTRIBUTE_PTR pTemplate, 6023 CK_ULONG ulAttributeCount, 6024 CK_OBJECT_HANDLE_PTR phKey 6025 ); 6026
C_DeriveKey derives a key from a base key, creating a new key object. hSession is the session’s 6027 handle; pMechanism points to a structure that specifies the key derivation mechanism; hBaseKey is the 6028 handle of the base key; pTemplate points to the template for the new key; ulAttributeCount is the number 6029 of attributes in the template; and phKey points to the location that receives the handle of the derived key. 6030
The values of the CKA_SENSITIVE, CKA_ALWAYS_SENSITIVE, CKA_EXTRACTABLE, and 6031 CKA_NEVER_EXTRACTABLE attributes for the base key affect the values that these attributes can hold 6032 for the newly-derived key. See the description of each particular key-derivation mechanism in Section 6033 5.21.2 for any constraints of this type. 6034
If a call to C_DeriveKey cannot support the precise template supplied to it, it will fail and return without 6035 creating any key object. 6036
The key object created by a successful call to C_DeriveKey will have its CKA_LOCAL attribute set to 6037 CK_FALSE. In addition, the object created will have a value for CKA_UNIQUE_ID generated and 6038 assigned (See Section 4.4.1). 6039
Return values: CKR_ARGUMENTS_BAD, CKR_ATTRIBUTE_READ_ONLY, 6040 CKR_ATTRIBUTE_TYPE_INVALID, CKR_ATTRIBUTE_VALUE_INVALID, 6041 CKR_CRYPTOKI_NOT_INITIALIZED, CKR_CURVE_NOT_SUPPORTED, CKR_DEVICE_ERROR, 6042 CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, CKR_DOMAIN_PARAMS_INVALID, 6043 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 6044 CKR_HOST_MEMORY, CKR_KEY_HANDLE_INVALID, CKR_KEY_SIZE_RANGE, 6045 CKR_KEY_TYPE_INCONSISTENT, CKR_MECHANISM_INVALID, 6046
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 159 of 168
CKR_MECHANISM_PARAM_INVALID, CKR_OK, CKR_OPERATION_ACTIVE, CKR_PIN_EXPIRED, 6047 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_SESSION_READ_ONLY, 6048 CKR_TEMPLATE_INCOMPLETE, CKR_TEMPLATE_INCONSISTENT, 6049 CKR_TOKEN_WRITE_PROTECTED, CKR_USER_NOT_LOGGED_IN. 6050
Example: 6051
CK_SESSION_HANDLE hSession; 6052
CK_OBJECT_HANDLE hPublicKey, hPrivateKey, hKey; 6053
CK_MECHANISM keyPairMechanism = { 6054
CKM_DH_PKCS_KEY_PAIR_GEN, NULL_PTR, 0 6055
}; 6056
CK_BYTE prime[] = {...}; 6057
CK_BYTE base[] = {...}; 6058
CK_BYTE publicValue[128]; 6059
CK_BYTE otherPublicValue[128]; 6060
CK_MECHANISM mechanism = { 6061
CKM_DH_PKCS_DERIVE, otherPublicValue, sizeof(otherPublicValue) 6062
}; 6063
CK_ATTRIBUTE template[] = { 6064
{CKA_VALUE, &publicValue, sizeof(publicValue)} 6065
}; 6066
CK_OBJECT_CLASS keyClass = CKO_SECRET_KEY; 6067
CK_KEY_TYPE keyType = CKK_DES; 6068
CK_BBOOL true = CK_TRUE; 6069
CK_ATTRIBUTE publicKeyTemplate[] = { 6070
{CKA_PRIME, prime, sizeof(prime)}, 6071
{CKA_BASE, base, sizeof(base)} 6072
}; 6073
CK_ATTRIBUTE privateKeyTemplate[] = { 6074
{CKA_DERIVE, &true, sizeof(true)} 6075
}; 6076
CK_ATTRIBUTE derivedKeyTemplate[] = { 6077
{CKA_CLASS, &keyClass, sizeof(keyClass)}, 6078
{CKA_KEY_TYPE, &keyType, sizeof(keyType)}, 6079
{CKA_ENCRYPT, &true, sizeof(true)}, 6080
{CKA_DECRYPT, &true, sizeof(true)} 6081
}; 6082
CK_RV rv; 6083
6084
. 6085
. 6086
rv = C_GenerateKeyPair( 6087
hSession, &keyPairMechanism, 6088
publicKeyTemplate, 2, 6089
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 160 of 168
privateKeyTemplate, 1, 6090
&hPublicKey, &hPrivateKey); 6091
if (rv == CKR_OK) { 6092
rv = C_GetAttributeValue(hSession, hPublicKey, template, 1); 6093
if (rv == CKR_OK) { 6094
/* Put other guy’s public value in otherPublicValue */ 6095
. 6096
. 6097
rv = C_DeriveKey( 6098
hSession, &mechanism, 6099
hPrivateKey, derivedKeyTemplate, 4, &hKey); 6100
if (rv == CKR_OK) { 6101
. 6102
. 6103
} 6104
} 6105
} 6106
5.19 Random number generation functions 6107
Cryptoki provides the following functions for generating random numbers: 6108
5.19.1 C_SeedRandom 6109
CK_DECLARE_FUNCTION(CK_RV, C_SeedRandom)( 6110 CK_SESSION_HANDLE hSession, 6111 CK_BYTE_PTR pSeed, 6112 CK_ULONG ulSeedLen 6113 ); 6114
C_SeedRandom mixes additional seed material into the token’s random number generator. hSession is 6115 the session’s handle; pSeed points to the seed material; and ulSeedLen is the length in bytes of the seed 6116 material. 6117
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 6118 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 6119 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 6120 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_ACTIVE, 6121 CKR_RANDOM_SEED_NOT_SUPPORTED, CKR_RANDOM_NO_RNG, CKR_SESSION_CLOSED, 6122 CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 6123
Example: see C_GenerateRandom. 6124
5.19.2 C_GenerateRandom 6125
CK_DECLARE_FUNCTION(CK_RV, C_GenerateRandom)( 6126
CK_SESSION_HANDLE hSession, 6127
CK_BYTE_PTR pRandomData, 6128
CK_ULONG ulRandomLen 6129
); 6130
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 161 of 168
C_GenerateRandom generates random or pseudo-random data. hSession is the session’s handle; 6131 pRandomData points to the location that receives the random data; and ulRandomLen is the length in 6132 bytes of the random or pseudo-random data to be generated. 6133
Return values: CKR_ARGUMENTS_BAD, CKR_CRYPTOKI_NOT_INITIALIZED, 6134 CKR_DEVICE_ERROR, CKR_DEVICE_MEMORY, CKR_DEVICE_REMOVED, 6135 CKR_FUNCTION_CANCELED, CKR_FUNCTION_FAILED, CKR_GENERAL_ERROR, 6136 CKR_HOST_MEMORY, CKR_OK, CKR_OPERATION_ACTIVE, CKR_RANDOM_NO_RNG, 6137 CKR_SESSION_CLOSED, CKR_SESSION_HANDLE_INVALID, CKR_USER_NOT_LOGGED_IN. 6138
Example: 6139
CK_SESSION_HANDLE hSession; 6140
CK_BYTE seed[] = {...}; 6141
CK_BYTE randomData[] = {...}; 6142
CK_RV rv; 6143
6144
. 6145
. 6146
rv = C_SeedRandom(hSession, seed, sizeof(seed)); 6147
if (rv != CKR_OK) { 6148
. 6149
. 6150
} 6151
rv = C_GenerateRandom(hSession, randomData, sizeof(randomData)); 6152
if (rv == CKR_OK) { 6153
. 6154
. 6155
} 6156
5.20 Parallel function management functions 6157
Cryptoki provides the following functions for managing parallel execution of cryptographic functions. 6158 These functions exist only for backwards compatibility. 6159
5.20.1 C_GetFunctionStatus 6160
CK_DECLARE_FUNCTION(CK_RV, C_GetFunctionStatus)( 6161 CK_SESSION_HANDLE hSession 6162 ); 6163
In previous versions of Cryptoki, C_GetFunctionStatus obtained the status of a function running in 6164 parallel with an application. Now, however, C_GetFunctionStatus is a legacy function which should 6165 simply return the value CKR_FUNCTION_NOT_PARALLEL. 6166
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_FUNCTION_FAILED, 6167 CKR_FUNCTION_NOT_PARALLEL, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, 6168 CKR_SESSION_HANDLE_INVALID, CKR_SESSION_CLOSED. 6169
5.20.2 C_CancelFunction 6170
CK_DECLARE_FUNCTION(CK_RV, C_CancelFunction)( 6171 CK_SESSION_HANDLE hSession 6172 ); 6173
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 162 of 168
In previous versions of Cryptoki, C_CancelFunction cancelled a function running in parallel with an 6174 application. Now, however, C_CancelFunction is a legacy function which should simply return the value 6175 CKR_FUNCTION_NOT_PARALLEL. 6176
Return values: CKR_CRYPTOKI_NOT_INITIALIZED, CKR_FUNCTION_FAILED, 6177 CKR_FUNCTION_NOT_PARALLEL, CKR_GENERAL_ERROR, CKR_HOST_MEMORY, 6178 CKR_SESSION_HANDLE_INVALID, CKR_SESSION_CLOSED. 6179
5.21 Callback functions 6180
Cryptoki sessions can use function pointers of type CK_NOTIFY to notify the application of certain 6181 events. 6182
5.21.1 Surrender callbacks 6183
Cryptographic functions (i.e., any functions falling under one of these categories: encryption functions; 6184 decryption functions; message digesting functions; signing and MACing functions; functions for verifying 6185 signatures and MACs; dual-purpose cryptographic functions; key management functions; random number 6186 generation functions) executing in Cryptoki sessions can periodically surrender control to the application 6187 who called them if the session they are executing in had a notification callback function associated with it 6188 when it was opened. They do this by calling the session’s callback with the arguments (hSession, 6189 CKN_SURRENDER, pApplication), where hSession is the session’s handle and pApplication was 6190 supplied to C_OpenSession when the session was opened. Surrender callbacks should return either the 6191 value CKR_OK (to indicate that Cryptoki should continue executing the function) or the value 6192 CKR_CANCEL (to indicate that Cryptoki should abort execution of the function). Of course, before 6193 returning one of these values, the callback function can perform some computation, if desired. 6194
A typical use of a surrender callback might be to give an application user feedback during a lengthy key 6195 pair generation operation. Each time the application receives a callback, it could display an additional “.” 6196 to the user. It might also examine the keyboard’s activity since the last surrender callback, and abort the 6197 key pair generation operation (probably by returning the value CKR_CANCEL) if the user hit <ESCAPE>. 6198
A Cryptoki library is not required to make any surrender callbacks. 6199
5.21.2 Vendor-defined callbacks 6200
Library vendors can also define additional types of callbacks. Because of this extension capability, 6201 application-supplied notification callback routines should examine each callback they receive, and if they 6202 are unfamiliar with the type of that callback, they should immediately give control back to the library by 6203 returning with the value CKR_OK. 6204
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 163 of 168
6 PKCS #11 Implementation Conformance 6205
An implementation is a conforming implementation if it meets the conditions specified in one or more 6206 server profiles specified in [PKCS #11-Prof]. 6207
If a PKCS #11 implementation claims support for a particular profile, then the implementation SHALL 6208 conform to all normative statements within the clauses specified for that profile and for any subclauses to 6209 each of those clauses. 6210
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 164 of 168
Appendix A. Acknowledgments 6211
The following individuals have participated in the creation of this specification and are gratefully 6212 acknowledged: 6213
6214
Participants: 6215
List needs to be pasted in here 6216
Gil Abel, Athena Smartcard Solutions, Inc. 6217
Warren Armstrong, QuintessenceLabs 6218
Jeff Bartell, Semper Foris Solutions LLC 6219
Peter Bartok, Venafi, Inc. 6220
Anthony Berglas, Cryptsoft 6221
Joseph Brand, Semper Fortis Solutions LLC 6222
Kelley Burgin, National Security Agency 6223
Robert Burns, Thales e-Security 6224
Wan-Teh Chang, Google Inc. 6225
Hai-May Chao, Oracle 6226
Janice Cheng, Vormetric, Inc. 6227
Sangrae Cho, Electronics and Telecommunications Research Institute (ETRI) 6228
Doron Cohen, SafeNet, Inc. 6229
Fadi Cotran, Futurex 6230
Tony Cox, Cryptsoft 6231
Christopher Duane, EMC 6232
Chris Dunn, SafeNet, Inc. 6233
Valerie Fenwick, Oracle 6234
Terry Fletcher, SafeNet, Inc. 6235
Susan Gleeson, Oracle 6236
Sven Gossel, Charismathics 6237
John Green, QuintessenceLabs 6238
Robert Griffin, EMC 6239
Paul Grojean, Individual 6240
Peter Gutmann, Individual 6241
Dennis E. Hamilton, Individual 6242
Thomas Hardjono, M.I.T. 6243
Tim Hudson, Cryptsoft 6244
Gershon Janssen, Individual 6245
Seunghun Jin, Electronics and Telecommunications Research Institute (ETRI) 6246
Wang Jingman, Feitan Technologies 6247
Andrey Jivsov, Symantec Corp. 6248
Mark Joseph, P6R 6249
Stefan Kaesar, Infineon Technologies 6250
Greg Kazmierczak, Wave Systems Corp. 6251
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 165 of 168
Mark Knight, Thales e-Security 6252
Darren Krahn, Google Inc. 6253
Alex Krasnov, Infineon Technologies AG 6254
Dina Kurktchi-Nimeh, Oracle 6255
Mark Lambiase, SecureAuth Corporation 6256
Lawrence Lee, GoTrust Technology Inc. 6257
John Leiseboer, QuintessenceLabs 6258
Sean Leon, Infineon Technologies 6259
Geoffrey Li, Infineon Technologies 6260
Howie Liu, Infineon Technologies 6261
Hal Lockhart, Oracle 6262
Robert Lockhart, Thales e-Security 6263
Dale Moberg, Axway Software 6264
Darren Moffat, Oracle 6265
Valery Osheter, SafeNet, Inc. 6266
Sean Parkinson, EMC 6267
Rob Philpott, EMC 6268
Mark Powers, Oracle 6269
Ajai Puri, SafeNet, Inc. 6270
Robert Relyea, Red Hat 6271
Saikat Saha, Oracle 6272
Subhash Sankuratripati, NetApp 6273
Anthony Scarpino, Oracle 6274
Johann Schoetz, Infineon Technologies AG 6275
Rayees Shamsuddin, Wave Systems Corp. 6276
Radhika Siravara, Oracle 6277
Brian Smith, Mozilla Corporation 6278
David Smith, Venafi, Inc. 6279
Ryan Smith, Futurex 6280
Jerry Smith, US Department of Defense (DoD) 6281
Oscar So, Oracle 6282
Graham Steel, Cryptosense 6283
Michael Stevens, QuintessenceLabs 6284
Michael StJohns, Individual 6285
Jim Susoy, P6R 6286
Sander Temme, Thales e-Security 6287
Kiran Thota, VMware, Inc. 6288
Walter-John Turnes, Gemini Security Solutions, Inc. 6289
Stef Walter, Red Hat 6290
James Wang, Vormetric 6291
Jeff Webb, Dell 6292
Peng Yu, Feitian Technologies 6293
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 166 of 168
Magda Zdunkiewicz, Cryptsoft 6294
Chris Zimman, Individual 6295
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 167 of 168
Appendix B. Manifest constants 6296
The definitions for manifest constants specified in this document can be found in the following normative 6297 computer language definition files: 6298
• include/pkcs11-v3.00/pkcs11.h 6299
• include/pkcs11-v3.00/pkcs11t.h 6300
• include/pkcs11-v3.00/pkcs11f.h 6301
pkcs11-base-v3.0-cs01 19 December 2019 Standards Track Work Product Copyright © OASIS Open 2019. All Rights Reserved. Page 168 of 168
Appendix C. Revision History 6302
6303
Revision Date Editor Changes Made
csprd 02 wd01 Oct 8 2019 Dieter Bong Created csprd02 based on csprd01
csprd 02 wd02 Nov 8 2019 Dieter Bong Item #26 as per “PKCS11 mechnisms review” document
csprd 02 wd03 Dec 3 2019 Dieter Bong Changes as per “PKCS11 base spec review” document
6304