planar systems, inc. systems, inc. 1195 nw compton drive ... do not touch the lcd display screen...

24

Upload: phamkiet

Post on 21-May-2018

216 views

Category:

Documents


2 download

TRANSCRIPT

Planar Systems, Inc.

1195 NW Compton Drive

Beaverton, OR 97006-1992

www.planar.com

Customer Service

Planar provides the following technical support services:

Internet Support

For support available 24/7 visit Planar's Online Technical Support at

www.planar.com/support. Our Online Technical Support is where you'll find solutions to many

common problems, download documentation, view answers to frequently asked questions

(FAQs) and get troubleshooting advice, or email Planar your support question.

Talk to a Customer Service Representative

To contact Planar's Customer First(TM) Technical Support Service call 1.866.PLANAR.1

(866.752.6271). This service is available 5am - 5pm Pacific Time, 8am - 8pm Eastern Time,

Monday through Friday.

Contact Us

24x7 Online Technical Support: http://www.planar.com/support

Email: [email protected]

Tel: 1-866-PLANAR1 (866) 752-6271

Hours: M-F, 5am - 5pm Pacific Time, 8am - 8pm Eastern

The information contained in this document is subject to change without notice.

This document contains proprietary information that is protected by copyright. All rights

are reserved. No part of this document may be reproduced, translated to another lan-

guage or stored in a retrieval system, or transmitted by any means, electronic,

mechanical, photocopying, recording, or otherwise, without prior written permission.

Windows is a registered trademark of Microsoft, Inc.

Other brand or product names are trademarks of their respective holders.

Important Recycle Instruction:

LCD Lamp(s) inside this product contain mercury. This product may contain

other electronic waste that can be hazardous if not disposed of properly. Recycle or

dispose in accordance with local, state, or federal Laws. For more information,

contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific

disposal information check WWW.LAMPRECYCLE.ORG.

1

Usage NoticePrecautions ................................................................................. 2

Introduction

About the Product ....................................................................... 3Package Overview ...................................................................... 4

Installation

Product Overview ........................................................................ 5

User Controls

Front Panel Controls ................................................................... 11How to Use the OSD Menus ....................................................... 12On-Screen Display Menus .......................................................... 13

Appendices

Product Dimensions ....................................................................

17Compatibility Modes ...................................................................

18

��������������

Pivot Software Installation...........................................................

Troubleshooting ........................................................................... 14

16Warning Signal ............................................................................ 15

Start Your Installation .................................................................. 8

2

�����������

Warning- ��������������� ��������������� �������������������������������������������������

Warning- �������������������������������������������������������������������� �

���������������������������� �����������������������������������������������������������������������������������������

Do:

� Turn off the product before cleaning.

� Use only a dry soft cloth or clean room wiper when cleaning theLCD Display screen surface.

� Use a soft cloth moistened with mild detergent to clean the displayhousing.

� Use only a high quality and safety approved AC/DC power adapter.

� Disconnect the power plug from the AC outlet if the product is notgoing to be used for an extended period of time.

Don’t:

� Do not touch the LCD Display screen surface with sharp or hardobjects.

� Do not use abrasive cleaners, waxes or solvents for your cleaning.� Do not operate the product under the following conditions:

- Extremely hot, cold or humid environment.- Areas susceptible to excessive dust and dirt.- Near any appliance generating a strong magnetic field.- Place in direct sunlight.

3

����������

About the Product������������ !�"#$���������%��������������������&��������������'�(�)��*�������������������'"#$)����������������������������������%���������������������

� Dual Analog and Digital signal input

� 21.3” diagonal screen size

� 1600 x 1200 high resolution

� Wide Viewing Angle Technology

� 31.5 ~ 91.1 kHz horizontal scan

� 56 ~ 85 Hz refresh rate

� Auto Adjustment and Re-scaling function

� High quality full screen re-scaling capability

� Multilingual OSD user controls

� VESA DPMS power saving

� Video capability

� Audio capability

� Kensington lock capability

4

Package Overview

LCD Display Power Adapter Power Cord

VGA Signal Cable DVI-D Cable Audio-In Cable

S-Video Cable Video Cable User’s Guide

Landing Strip CD-ROM for

Pivot software

Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html

Cables, Replacement Lamps and Accessories

To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touchscreen or other Planar products visit our online store at www.PlanarOnline.com or find other stores who carry Planar products at http://www.planar.com/howtobuy

Alen
矩形
Alen
文字方塊
Pivot Software
Alen
文字方塊
( Optional )

5

����������

���������������

� Front View

Stand

PanelControls

� Back View

Connector Ports (Inside the back cover)

Kensington SecurityLock Slot

S-V ID EOVID EO

DC-In

DVI InputPort

AnalogInput Port

CompositeVideo

S-Video

Liquid Crystal Display(LCD Display)

Audio

6

u Kensington Security Slot

The monitor can be secured to your desk or any other fixed object withKensington lock security products. Kensington lock is not included.

Kensington Security Slot

Tilt Angle:-5° ~ 35°

u Tilt

Grasp the LCD Display with both hands and adjust the tilt as desired.

Alen
線段

7��VESA Mount on your monitor

������������������������+,-.�(���������/��������������/�������0��������-�������%�����������������������������������������������������������������������������������������������������������������������������������%���������������������+,-.����������������������������������� ����������������

���+,-.�/������������������������������������������������������'��%������������%����������)�

�����������������������%������������������������������������%���������������������%�����������������������������

��������������������������������%�1���������������������� �������������������������%�������2��������������/3�����%�

����

+,-./������0�������

�44��

�44��

8

� Connecting the Display (Figure 10.1)

������������������������������������������%��������������������������

�� 5������������*��������������������

�� #��������$#���%��������������%�����������6������������������.#���%����������������%�������������������������������

��������������������'�)�

� (������#�%��.����������7�#��������+8.��������������������������+8.��������������������9&�����������������������������������������������%�'�)�

3� (������#�%��$+0������������7�#��������$+0�����������������������������������������������������������6����������������������$+0&$���������������������������������������%�'�)�

9� 0��������������������������������������&������-&+���������������������������������-&+����������'�)�

:� 0�������������������������������������&������������������������������������������������������������'�)�

;� 0�������������������������������������&������������������������������������������������������������'�)�

2� �����������������������������������������������

�������������������

Notice:To ensure the LCD Display will work well with your computer,pleaseconfigure the display mode of your graphics card to make it less than orequal to 1600 x 1200 resolution and make sure the timing of the displaymode is compatible with the LCD screen. We have listed the “CompatibilityModes” of this LCD screen in appendices for your reference.

9

S -V ID E OV ID E O

Figure 10.1

�S-Video Cable

�Video Cable

�DVI-DCable

�VGACable

�Power

Adapter& Power

Cord

�Audio Cable

10

11

Front Panel Controls

nocI/oN lortnoC noitcnuF

UNEM nottubuneM .sunemDSOehtpopoT

TCELES otuA/tceleS

smetitnemtsujdaehttcelesoT.sunemDSOmorf

"tnemtsujdaotuA"ehtetavitcaoTmumitponaniatbootnoitcnuf

.egami

suniM/suniMssenthgirB

fossenthgirbehtsesaerceD.1.egamiyalpsideht

ehtfoeulavehtsesaerceD.2.smetitnemtsujda

sulP/sulPssenthgirB

fossenthgirbehtsesaercnI.1.egamiyalpsideht

ehtfoeulavehtsesaercnI.2.smetitnemtsujda

DELrewoP

siyalpsidehtsetacidnineerG.1.nodenrut

yalpsidehtsetacidnirebmA.2.edomevas-rewopnisi

hctiwSrewoPehtotrewopehtffO/nOsehctiwS

.yalpsiDDCL

� � � � � �

����������

12

How to Use the OSD Menus

1. Press the “MENU” button to pop up the “on-screen menu” and toselect among the four Main Menus.

2. Choose the adjustment items by pressing the “SELECT” button.

3. Adjust the value of the adjustment items by pressing the “�”or “�” button.

4. After a period of inactivity.*(base on a user setting) the OSD menuswill automatically disappear.

13

��������������������

Main Menu Menu Level 1 Menu Level 2 Description ADJ Scale

Brightness To adjust the brightness. 0 ~ 100

Contrast To adjust the contrast of the image. 0 ~ 100

Hue Adjusts the red-green color balance of the image. -45+45

Saturation Adjusts the image from black and white to full saturated colour. 0 ~ 100

Flesh-tone off/Week/Soft/Strong

Black Level * To adjust black level of the image 0 ~ 100

Scaling 1:1/Full/Aspect

Auto Adjust * Select

Phase *

Synchoronizes the signal timing of the display to that of the

graphics card. When you experience an unstable to flickering

image,use this function to make an adjustment.

0 ~ 255

Clock *

Changes the displays data frequency to match the frequency of

your graphics card. When you experience a vertical flickering

bar,use this function to make an adjustment.

0 ~ 255

Sharpness ** Adjusts the sharpness of the image.

Zoom In/Out

Zoom Horizontal Pan Left/Right

Zoom Vertical Pan Up/Down

Vertical * Changes the vertical position of the image 0 ~ 255

Horizontal * Changes the horizontal position of the image 0 ~ 255

sRGB On/Off

Gamma Correction Off/1.8/2.2

Color Temperature

Red Adjusts Red colour intensity 0 ~ 255

Green Adjusts Green colour intensity 0 ~ 255

Blue Adjusts Blue colour intensty 0 ~ 255

PIP Mode Allows you to select PIP, PAP model, or Off.

PIP Size Allows you to adjust size of display ( Small/Med./Large )

Vertical Changes the vertical position of the PIP window 0 ~ 100

Horizontal Changes the horizontal position of the PIP window 0 ~ 100

Icon 2 Allows you to choose the signal ( VGA/DVT/Composite/S-Video )

Vertical Adjusts the vertical position of the OSD 0 ~ 255

Horizontal Adjusts the horizontal position of the OSD 0 ~ 255

Transparency Changes the opaqueness of the OSD background. 0 ~ 10

Time out Adjusts the amount of time the OSD menu remains to display 5 ~ 60

OSD Zoom On/Off

Icon 4

Allow you to choose the OSD menu language (

English/Chinese/Japanese/French/German/Spanish/Italian/Korean

)

Icon 5 Factory Reset

To return the display parameters of the current mode to their

factory default settings.

Volume To adjust the sound volume.

Mute Allows you to disable the sound immediately.

Note : The symbol ( * ) means the VGA signal only

The symbol ( ** ) means the VGA/Composite/S-Video signal

PIP CONTROL

Icon 6

Icon 3

IMAGE

Icon 1

DISPLAY

POSITION

COLOR

User / 6500k / 9300k

0 ~ 50

14

TroubleshootingIf you are experiencing trouble with the LCD display, refer to thefollowing trouble shooting. If the problem persists, please contactyour local dealer or our service center.

Problem: No image appears on screen.

�Check that all the I/O and power connectors are correctly andwell connected as described in the “Installation” section.

�Make sure the pins of the connectors are not crooked or broken.

Problem: Partial image or incorrectly displayed image.

�Check to see if the resolution of your computer is higher than that of theLCD Display.

�Reconfigure the resolution of your computer to make it less than or equalto 1600 x 1200.

Problem: Image has vertical flickering line bars.

�Use “Frequency” to make an adjustment.

�Check and reconfigure the display mode of the vertical refresh rate of yourgraphics card to make it compatible with the LCD Display.

Problem: Image is unstable and flickering

�Use “Tracking” to make an adjustment.

Problem: Image is scrolling

�Check and make sure the VGA signal cable (or adapter) is well connected.

�Check and reconfigure the display mode of the vertical refresh rate ofyour graphics card to make it compatible with the LCD Display.

Problem: Vague image (characters and graphics)

�Use “Frequency” to make an adjustment. If this problem still exists,use “Tracking” to make an adjustment.

�������

15

Warning Signal

�No SignalThis message means that the LCD Display has been powered on but itcannot receive any signal from the computer graphics card. Check all thepower switches, power cables, and VGA signal cable.

�Out Of RangeThis message means that the signal of the computer graphics card is notcompatible with the LCD Display. When the signal is not included in thecompatibility mode we have listed in the Appendices of this manual, theLCD Display will show this message.

���� Sometimes you may see warning messages for this LCD Display.This means that the LCD Display cannot correctly receive the signalfrom the computer graphics card.

16

Product Dimensions

Side View

64.5mm/2.54”

222.00mm/8.74”

Top View

Front View

482.28 mm / 18.98”

533.14mm/20.98”

17

Compatibility Modes

edoM noituloseR )zH(ycneuqerF )zHk(ycneuqerF.H

AGVMBI 053x046 07 5.13

AGVMBI 084x046 06 5.13

AGVMBI 004x027 07 5.13

AGVASEV 084x046 27 9.73

AGVASEV 084x046 57 5.73

AGVASEV 084x046 58 3.34

AGVSASEV 006x008 65 1.53

AGVSASEV 006x008 06 9.73

AGVSASEV 006x008 27 1.84

AGVSASEV 006x008 57 9.64

AGVSASEV 006x008 58 7.35

AGXASEV 867x4201 06 4.84

AGXASEV 867x4201 07 5.65

AGXASEV 867x4201 57 0.06

AGXASEV 867x4201 58 7.86

ASEV 468x2511 57 5.76

AGXSASEV 4201x0821 06 0.46

AGXSASEV 4201x0821 57 08

AGXSASEV 4201x0821 58 1.19

AGXUASEV 0021x0061 06 0.57

caMelppA 084x046 76 9.43

caMelppA 084x046 76 0.53

caMelppA 426x238 57 7.94

caMelppA 867x4201 57 2.06

orciMnuS 009x2511 66 8.16

orciMnuS 009x2511 67 1.17

18

������������� ���������

���������������� ��������������������������

�� ������������������������������������������

�� ��������� ��������!��"������� �����������������������������������#�$�����������#���� �"����

%� �����#���� �"�����&������!���������'���!�� �� (���#����������(��������� �����)'�*)'��+)'�����,)����"���"����-����������!�����#����������#�����������

.� ����/������!���0��������#��������������"�������10���!�'2�"���'������������������0���������������������������&�# ���0���������������������������� ���������!�

Planar Systems, Inc 1195 NW Compton Drive

Beaverton, OR 97006-1992

www.planar.com

© 2006 Planar Systems, Inc.

Planar is a registered trademark of Planar Systems, Inc. Other brands and

names are the property of their respective owners. Technical information in

this document is subject to change without notice.

P/N:36.61604G002 Rev.D

020-0454-00A