plant & machinery inc. - bidspotter.com

Plant & Machinery Inc.

MULTI LOCATION AUCTION

FEATURING: MACHINE TOOLS, FABRICATING EQUIPMENT,MORE!Started Apr 29, 2021 10am CT (4pm BST)

1304 Langham Creek Drive

Suite 454

Houston

Texas

77084

United States

Lot Description

1

POWER HOSE CRIMPING STATION, FINN POWER P20 CRIMPING MACHINE MDL. P20MS23, 2005, die set (12), from 6 mm to 41

mm, 3-limit switch station, Duramaster hyd. press, worktable, S/N 1.2D20MS-1070605 (Location 2: JE King Holdings, LLC, 1111

Glenwood Drive, Katy, TX 77493)

2TUBE DEBURR MACHINE, PROTO-1 MDL. RDM-2009, 2 HP Weg motor (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive,

Katy, TX 77493)

3HOSE FLASH CUTTER STATION, EWALD FLASH CUTTER SS48CS/5 TUBE, Olympia 1410 wire length meter, 1 HP abrasive saw,

worktable,S/N 310099 (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

4TUBE EXPANDER, MARKEN MDL. P2, new 2014, 100 PSI max pressure, S/N 1928 (Location 2: JE King Holdings, LLC, 1111

Glenwood Drive, Katy, TX 77493)

5COLLAR LOCKING STATION, PROTO-1 CLS-150, 2013, foot pedal control, hydraulic, S/N 19072-01-A01(Location 2: JE King

Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

6LOT OF DIGITAL PART LENGTH MEASURING SYSTEMS (2), w / toolbox & roller conveyour, 70" & 79" Lika scales (Location 2: JE

King Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

7HOSE CLEANING SYSTEM, ULTRACLEAN, S/N UP-PVS-11 (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX

77493)

8DOWNDRAFT TABLE, DIVERSI-TECH MDL. DP3X4, S/N 12977-1001-1477 (Location 2: JE King Holdings, LLC, 1111 Glenwood

Drive, Katy, TX 77493)

9 DUST COLLECTOR, TORIT MDL. 75, 1 HP, S/N F1825 (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

10 WOOD TOP WORKTABLE, w / (2) 5-1/2" Wilton vises (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

11ELECTRIFIED WOOD TOP WORKTABLE, w / Baldor dbl. end grinder & Somma Deburr machine (Location 2: JE King Holdings, LLC,

1111 Glenwood Drive, Katy, TX 77493)

12LOT CONSISTING OF: Dayton 8" double end grinder, Dayton Deburr machine & Vise Columbian (Location 2: JE King Holdings, LLC,

1111 Glenwood Drive, Katy, TX 77493)

13LOT OF WORKTABLES (2), (1) wood, w/small vise, (1) metal) (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX

77493)

14 LOT OF HIGH PRESSURE HOSE & (6) REELS (on pallet) (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

15HYDRAULIC TEST STAND, HYDRAULICS INTERNATIONAL MDL. HIS-S5L-30200, MFG. #56529, 30,000 PSI, S/N Z61903-01

(Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

16AUTOMATIC NC COLD SAW, KALAMAZOO MDL. C370ANC, new 2010, fully automatic, infinitely variable speed from 13 to 76 RPM,

swiveled frame for mitering, w/conveyor, S/N 081883001 (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

17

CNC ELECTRIC TUBE BENDER, BLM MDL. ETURN30, new 2010, Mdl. VG93D CNC control w/ 3D graphic programming, 12 axis,

6mm to 30mm cap., linear guides, roller drawer w / tooling, cabinet w / adaptors, pallet w / accessories & safety guarding, includes tube

rack, S/N 268100311186, (Location 2: JE King ...[more]

18TUBE INSPECTION SYSTEM, AICON 3D MEASUREMENT SYSTEM, New 2011, Hexagon optical camera 3D system, (16) 1.3 Mpixel

cameras, full size, built in computer, S/N 9L311327 (Location 2: JE King Holdings, LLC, 1111 Glenwood Drive, Katy, TX 77493)

19

CNC LATHE, DOOSAN LYNX MDL. 220A, new 2011, Doosan Fanuc Series I CNC control, 20.1” max. swing, 12.6” max. turning dia.,

12.68” max. turning length, 20 HP, 6,000 RPM, collet chuck, 12 pos. turret, add’l. collet chuck w/collets, approx. 4,690 cutting hours, S/N

ML0013-005275 (Location 5: Del Machine ...[more]

20IMAGE DIMENSION MEASURING SYSTEM, KEYENCE MDL. IM-6020, IM-6501E computer software, S/N CC112120 005275

(Location 5: Del Machine, 10145 Tanner Road, Houston, TX 77041)

21

CNC LATHE, 26” x 118” RYAZAN, GE Fanuc 18-T CNC control, 26” sw. over bed, 13” sw. over crosslide, 118” center to center length,

12” dia. 4-jaw chuck, 4” spdl. hole, 22 kw/26 kw 30 HP/35 HP main motor, 220-240 VAC 3 ph, boring bar saddle, Aloris quick change

toolpost, S/N 162 (Location 4: Grand Vall ...[more]

22

ENGINE LATHE, 45.25” x 324” POREBA MDL. TR115, 45.25” sw. over bed, 31” sw. over crosslide, 324” center to center length, 31”

dia. 4-jaw chuck, 4.5” spdl. hole, 27 kw/47 kw main motor, 460 VAC 3 ph, boring saddle carriage w/crosslide, S/N 1101-041 (Location 4:

Grand Valley Manufacturing, 701 East Sp ...[more]

23 PAINT BOOTH, 45’ W x 100’ L x 20’ H (Location 6: Tri-R-Erecting, 6510 Bourgeois Road, Houston, TX 77066)

25

CNC LATHE, DOOSAN PUMA MDL. 400LC, new 2007, Fanuc 21i--TB CNC control, 27.5” swing, 18.9” max. turning dia., 81.7” max.

turning length, hyd. steadyrest, 12 pos. turret, 21" pwr. chuck, 9,482 cutting hours, hyd. tailstock, chip conveyor, S/N P35L2860

(Location 3: REV Manufacturing, Inc. 4340 5th St ...[more]

26

{ Choice of lots: 26, 27, 28 } CNC LATHE, YAMA SEIKI MDL. GA-3600L, new 2006, Fanuc Oi-TC CNC control, 23.6” swing, 19.7” max.

turning dia., 23.5” max turning length, 25 HP, 2,500 RPM, Omnirest hyd. steady,15" chuck, 4.5" bore, chip conveyor, 12 pos. turret,

6,127 cutting hours, hyd. tailstock, ch ...[more]

27

{ Choice of lots: 26, 27, 28 } CNC LATHE, YAMA SEIKI MDL. GA-3300L, new 2006, Fanuc Oi-TC CNC control, 23.6” swing, 19.7” max.

turning dia., 48.38” max. turning length, Kitagawa 15", 3" bore, 12 pos. turret, 7,388 cutting hours, hy. tailstock, chip conveyor S/N

93021 (Location 3: REV Manufacturing ...[more]

28

{ Choice of lots: 26, 27, 28 } CNC LATHE, YAMA SEIKI MDL. GA3600, new 2006, Fanuc Oi-TC CNC control, 23.6” swing, 19.7” max.

turning dia., 23.46” max. turning length, 15" chuck, 12 pos. turret, battery issue, 7,247 cutting hours, hyd. tailstock, chip conveyor, S/N

92A065 (Location 3: REV Manufactu ...[more]

29CNC LATHE, CHEVALIER MDL. FBL-1233, new 2011, Fanuc Oi-TD CNC control, 15" pwr. chuck, 10 pos. turret, hyd. tailstock, chip

conveyor S/N E0110401 (pwr. supply issue) (Location 3: REV Manufacturing, Inc. 4340 5th Street, Brookshire, TX 77423)

30

CNC VERTICAL MACHINING CENTER, DAEWOO MDL. DMV3016, new 2003, Fanuc Series i CNC control, 17.7” x 39.4” table size,

32” X, 16” Y, 20” Z-axis travels, CAT-40, wired for 4th axis, cool blaster high pressure thru spindle coolant, 9,932 cutting hours, S/N

AV4E0167 (Location 3: REV Manufacturing, Inc. 4 ...[more]

31FORKLIFT, CATERPILLAR MDL. T70C, 8,000 LB. CAP. w / counter weight, 3-stage mast, 196" lift ht. LP, solid tires, S/N 33L1123

(Location 3: REV Manufacturing, Inc. 4340 5th Street, Brookshire, TX 77423)

32INITIAL PINCH PLATE ROLL, WEBB 1-1/8” X 10’ MDL. 16L, 18” top roll, S/N 5379 (Location 7: McCorvey Industrial Fabrication, 8610

Wallisville Road, Houston, TX 77029)

33INITIAL PINCH PLATE ROLL, WEBB 5/8” X 10’ MDL. 9L2A, 12” top roll, skid mtd. (Location 7: McCorvey Industrial Fabrication, 8610


34MECHANICAL IRONWORKER, WEBB NO. 4, Punch 1” hole in 1’2”, 3/8” x 6” shear, 1-1/2” sq., S/N 57-S-18 (Location 7: McCorvey

Industrial Fabrication, 8610 Wallisville Road, Houston, TX 77029)

35MECHANICAL SHEAR, COLUMBIA 3/16 X 10’, MDL. 4PSG-10,S/N W160-2 (Location 7: McCorvey Industrial Fabrication, 8610


36 PLATE ROLL, ¾” X 8’, 9” top roll (Location 7: McCorvey Industrial Fabrication, 8610 Wallisville Road, Houston, TX 77029)

37PORTABLE SHEAR, IOWA PRECISION, 78" cap. (Location 7: McCorvey Industrial Fabrication, 8610 Wallisville Road, Houston, TX

77029)

38BLAST CABINET, ALC, 60" x 24", (2) stations, abrasive blaster, (Location 7: McCorvey Industrial Fabrication, 8610 Wallisville Road,

Houston, TX 77029)

39CNC POWER PINNER, GRIP NAIL MDL. 7G23P.P.50, G.E. Fanuc CNC control (Location 7: McCorvey Industrial Fabrication, 8610


40BOX & PAN BRAKE, CHICAGO, MDL. 818, 8' x 18 ga, S/N 96819 (Location 7: McCorvey Industrial Fabrication, 8610 Wallisville Road,

Houston, TX 77029)

41 SHEAR, WYSONG 12’ x APPROX. 1/8 (Location 7: McCorvey Industrial Fabrication, 8610 Wallisville Road, Houston, TX 77029)

42

HORIZONTAL BORING MILL, GIDDINGS & LEWIS TABLE TYPE MDL. 70a-DP5-T, 5", new 1970, 60" x 144" table size, 96" vert.

travel, 36" quill travel, pwr. Draw bar, dbl. outriggers, Acu-Rite DRO, assorted tooling, S/N 150-993 (Location 11: Abbott Machine Co.,

700 West Broadway, Alton, IL 62002

43LOT OF ANGLE PLATES (2), 25"W. x 85.5" ht. x 49" dp. (Note: sold as a pair) (Location 11: Abbott Machine Co., 700 West Broadway,

Alton, IL 62002

44 ANGLE PLATE, 30"W. x 39"ht. x 18" dp. (Location 11: Abbott Machine Co., 700 West Broadway, Alton, IL 62002

45VERTICAL BANDSAW, 36" GROB MDL. NS36, 36" throat depth, 12" under guide, 28" x 24" tbl. S/N 1268 (Location 11: Abbott Machine

Co., 700 West Broadway, Alton, IL 62002

46KEYSEATER, DAVIS #4, 1/16" to 3/4" keyway cap., 401/2" stroke, 15-1/4" throat depth (Location 11: Abbott Machine Co., 700 West

Broadway, Alton, IL 62002

47DRILL PRESS, CLAUSING MDL. 2277, 20", T-slotted tbl. & base, 1.5 HP, S/N 529131 (Location 11: Abbott Machine Co., 700 West

Broadway, Alton, IL 62002

50

CNC LASER, TRUMPF TRUMATIC L3030 TLF4000, Siemens CNC Controls, 5' x 10' tbl. 60" X-axis travel, 120" Y-axis travel, 4,000

watt, pallet changer system, liftmaster material handling system, 5 x 10 dual pallet shuttle tables, resonator updated: OEM TLF 4000, 5"

and 7.5" cutting heads, chip conveyor, ...[more]

51

HYDRAULIC PRESSBRAKE, 144T x 12’ TRUMPF TRUMABEND V1300, new 2005, 6 axis programmable CNC backgauge, Delem

DA69-TW, windows based, 10 axis, CNC control, 3D color graphics display, hydraulic upper and lower crowning, 144 T, 8.5" stroke, 20"

max bed-press beam distance, 15" effective open height, +- ...[more]

52

CNC VERTICAL MACHINING CENTER, MAZAK MDL. VTC200C, wired for fourth axis, new 2001, Mazatrol PC Fusion CNC control,

65" X-axis travel, 20" Y-axis travel, 20" Z-axis travel, 24 pos. tool changer, chip conveyor, S/N 156048 (Location 15: MEI RIGGING,

13500 John F Kennedy Blvd, Houston, TX 77039

52A

{ Choice of lots: 52A } CNC GANTRY VERTICAL MACHINING CENTER, AWEA MDL. VP2012, new 2000, Fanuc 18M CNC control,

78.75" X-axis travel, 47.75" Y-axis travel, 30" Z-axis travel, 30 pos. ATC, plain table, 50 taper geared head, 5000 RPM spindle, powerful

35 HP height torque spindle motor, RS-232 Port, ...[more]

52B

CNC GANTRY VERTICAL MACHINING CENTER, AWEA MDL. VP2012, new 1999, Fanuc Series 18M CNC control, approx. 5 x 8'

table, electromagnetic chuck, 78.5" X-axis travel, 47.75" Y-axis travel, 30" Z-axis travel, 30 pos. ATC, plain table, 50 taper geared head,

5000 RPM spindle, powerful 35 HP height torque sp ...[more]

53

AUTOMATIC FEED THRU BRUSH DEBURRING MACHINE, FLADDER MDL. 300/GYRO – 1300VAC, new 2010, FLADDER

300/GYRO 1300 VAC Rotating Carousel Denibbing Deburring; Perfect for both Metal finishing and grain sanding; machine has very low

hours of production time. Specifications: -- 51" Width x 4" max. thickness ...[more]

53AHORIZONTAL BORING MILL, TOSHIBA SHIBAURA MDL. BT-10B (R1), new 1980, 4” dia. spdl., 49” x 44” rotary table, spds: 20-1000

RPM, pendant control, Newall D.R.O., S/N 6908 (Location 15: MEI Rigging, 13500 John F. Kennedy Blvd., Houston, TX 77039)

54RADIAL ARM DRILL, GIDDINGS & LEWIS 6' X 15", new 1964, box table, dbl. base, pwr. clamping & elevation, pwr. rapids, S/N 954-

00116-64 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

55ENGINE LATHE, LODGE & SHIPLEY MDL. AVS2013, new 1981, 20-1/2" over carriage, 13-1/2" over crosslide, 50" dist. btn. centers,

taper attach., 15" dia. 4-jaw chuck, S/N 50900 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

56HORIZONTAL MILL, CINCINNATI MILACRON MDL. 207MK, 13-1/2” x 59-1/2” table, S/N 13J23P1AFE-53 (Location 1: Fabcorp, Inc.,

6951 West Little York Road, Houston, TX 77040)

56A MILLING MACHINE, BRIDGEPORT, S/N N.A. (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

56BENGINE LATHE, MONARCH HEAVY DUTY, 32" swing, 60" dist. btn. centers, 24" dia. 4-jaw chuck, taper attach., S/N N.A. (Location 1:

Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

56DRADIAL ARM DRILL, GIDDINGS & LEWIS BICKFORD CHIPMASTER 11" X 3', new 1974, box table, S/N 951-00565-74 (Location 1:


56EVACUUM PLATE LIFTER, ANVER MDL. VPF-57-AC VACUUM PACK, new 2018, (4) 6-vacuum pack, S/N S0T80006615 (Location 1:


57VERTICAL TURRET MILL, ACER E-MILL MDL. FVS-3VS, new 2000, 9" x 42" table, S/N 9501036 (Location 1: Fabcorp, Inc., 6951

West Little York Road, Houston, TX 77040)

58VERTICAL TURRET MILL, ACRA MDL. A3V, 10" x 54" table, 3 HP head, longitudinal pwr. feed, Newall C80 2-axis D.R.O., S/N

0G11921 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

59{ Choice of lots: 59, 60 } VERTICAL TURRET MILL, ATRUMP MDL. K3VL, variable spd., 10" x 50" table, longitudinal pwr. feed, 3 HP

motor, Heidenhain D.R.O., S/N K3VL-445 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60{ Choice of lots: 59, 60 } VERTICAL TURRET MILL, ATRUMP MDL. K3VL, 9" x 49" table, longitudinal pwr. feed, Sony Magnescale

D.R.O., 3 HP motor, S/N K3VL-462 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60A { Choice of lots: 60A } MACHINE VISE, KURT, 6" (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60B MACHINE VISE, YUASA, 6" (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60C { Group of lots: 60C, 60D } MACHINE VISE (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60D { Group of lots: 60C, 60D } MACHINE VISE (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60E LOT OF SPADE TIP DRILL BITS (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60F LOT OF LARGE MILLING HEADS (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60G LOT OF SMALL MILLING HEADS (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60H{ Choice of lots: 60H } LOT OF CAT-50 TOOL HOLDERS, w / milling heads (Location 1: Fabcorp, Inc., 6951 West Little York Road,

Houston, TX 77040)

60I{ Choice of lots: 60I, 60J } LOT OF CAT-50 TOOL HOLDERS, w / some tooling (Location 1: Fabcorp, Inc., 6951 West Little York Road,

Houston, TX 77040)

60J{ Choice of lots: 60I, 60J } LOT OF CAT-50 TOOL HOLDERS, w / some tooling (Location 1: Fabcorp, Inc., 6951 West Little York Road,

Houston, TX 77040)

60K LOT OF BORING HEAD BITS (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60L{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6", (no handles) (Location 1:


60M{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6", (no handles) (Location 1:


60N{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6", (no handles) (Location 1:


60O{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6", (Location 1: Fabcorp, Inc., 6951


60P{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6", (Location 1: Fabcorp, Inc., 6951


60Q{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6" (Location 1: Fabcorp, Inc., 6951


60R{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6" (Location 1: Fabcorp, Inc., 6951


60S{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6" (Location 1: Fabcorp, Inc., 6951


60T{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6" (Location 1: Fabcorp, Inc., 6951


60U{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, KURT, 6" (Location 1: Fabcorp, Inc., 6951


60V{ Choice of lots: 60L, 60M, 60N, 60O, 60P, 60Q, 60R, 60S, 60T, 60U, 60V } MACHINE VISE, YUASA, 6" (Location 1: Fabcorp, Inc.,


60W MANUAL T-SLOTTED ROTARY TABLE, 90 deg., 36" face (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60XHAND CRANK TAPPING MACHINE, CEDARBERG 8200-002 #8 - 3/4" TAPPING CAPACITY HAND TAPPER X 7-1/8” THROAT

DEPTH (on rolling stand) (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60Y TOOL O RAMA, RALMIKE, (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

60ZFLAT PART MEASUREMENT & DIGITIZING SCANNER, FABRIVISION, 4' x 6' table, 8 cameras, computer and software included, S/N

2199L (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

61SUB ARC WELDING MANIPULATOR, PROFAX WM-66-4, New 2012, LINCOLN IDEALARC DC600 POWER SOURCE S/N

U1120801903, 83” HORIZ REACH, 78” HORIZ. TRAVEL, 54” VERT. TRAVEL, LINCOLN NA-3N CONTROL, FLUX HOPPER.

62{ Choice of lots: 62, 63 } WELDER, MILLER MDL. DELTAWELD 451, S/N KE712565 (Location 1: Fabcorp, Inc., 6951 West Little York

Road, Houston, TX 77040)

63{ Choice of lots: 62, 63 } WELDER, MILLER MDL. DELTAWELD 451, S/N KE711831 (Location 1: Fabcorp, Inc., 6951 West Little York


64TIG WELDER, LINCOLN MDL. IDEALARC, S/N AC-399598 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX

77040)

65 WELDING MACHINE, AIRCO, S/N U476571 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

66

WELDING POSITIONER, PRESTON EASTON, Mdl. PA-25HD, 2500 Lb. capacity at 12" center of gravity, 135 degree contstant speed

power tilt, variable speed rotation from .4 to 1.2 rpm, 42" square table w/T-slots, 460 v, 3-phase,S/N PA-25HD (Location 1: Fabcorp,

Inc., 6951 West Little York Road, Houston, TX ...[more]

66A{ Choice of lots: 66A, 66B } MOTOMAN ROBOTICS POSITIONER, YAKAWA MDL. MH-3100, S/N 000515 (Location 1: Fabcorp, Inc.,


66B{ Choice of lots: 66A, 66B } MOTOMAN ROBOTICS POSITIONER, YAKAWA MDL. MH-3100, S/N 000515 (Location 1: Fabcorp, Inc.,


66CSET OF TANK TURNING RulesS, RANSOME, 5 T. consisting of Idler & Drive w/cntrol, solid rubber wheels(Location 1: Fabcorp, Inc.,


66DPLASMA CUTTER, THERMAL ARC MDL. PAK10XR, S/N 070328A183501C (Location 1: Fabcorp, Inc., 6951 West Little York Road,

Houston, TX 77040)

66E TAP DISINTEGRATOR, ELECTRO ARC, 10 KVA

67{ Choice of lots: 67, 69, 70, 71A, 71B } SCREW TYPE AIR COMPRESSOR, EATON, 100 HP (Location 1: Fabcorp, Inc., 6951 West

Little York Road, Houston, TX 77040)

68{ Choice of lots: 68 } SCREW TYPE AIR COMPRESSOR, INGERSOLL RAND, 50 HP (Location 1: Fabcorp, Inc., 6951 West Little York


69{ Choice of lots: 67, 69, 70, 71A, 71B } SCREW TYPE AIR COMPRESSOR, GARDNER DENVER (parts machine) (Location 1: Fabcorp,

Inc., 6951 West Little York Road, Houston, TX 77040)

70{ Choice of lots: 67, 69, 70, 71A, 71B } SCREW TYPE AIR COMPRESSOR, GARDNER DENVER, 50 HP (Location 1: Fabcorp, Inc.,


71{ Choice of lots: 71 } SCREW TYPE AIR COMPRESSOR, GARDNER DENVER, 50 HP (Location 1: Fabcorp, Inc., 6951 West Little

York Road, Houston, TX 77040)

71A{ Choice of lots: 67, 69, 70, 71A, 71B } SCREW TYPE AIR COMPRESSOR, INGERSOLL RAND, 100 HP (Location 1: Fabcorp, Inc.,


71B{ Choice of lots: 67, 69, 70, 71A, 71B } SCREW TYPE AIR COMPRESSOR, INGERSOLL RAND, 100 HP (missing motor) (Location 1:


71CSCREW TYPE AIR COMPRESSOR, GARDNER DENVER, 50 HP (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX

77040)

72HORIZONTAL AIR COMPRESSOR, CURTIS, 25 HP, S/N 01M060010 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston,

TX 77040)

73 AIR DRYER, ZEKS HEATSINK, S/N N.A. (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

74AIR DRYER, INGERSOLL RAND, S/N TMS-0540/0509/7182 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX

77040)

74A AIR DRYER, STYLE AIRE (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

74B{ Choice of lots: 74B, 74C } AIR DRYER, PNEUMATIC INC. MDL. PHS-300 (Location 1: Fabcorp, Inc., 6951 West Little York Road,

Houston, TX 77040)

74C{ Choice of lots: 74B, 74C } AIR DRYER, PNEUMATIC INC. MDL. PHS-300 (Location 1: Fabcorp, Inc., 6951 West Little York Road,

Houston, TX 77040)

74D AIR DRYER, SULLAIR MDL. RN150, S/N 4015SA1445 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

75 LIQUID CHILLER SYSTEM, RITE TEMP, S/N 502943271 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

76{ Choice of lots: 76, 77, 78 } AC UNIT, RUUD MDL. UKKA-A048BM10X, S/N 1R5640ADAAD0010669 (Location 1: Fabcorp, Inc., 6951


77{ Choice of lots: 77, 78 } AC UNIT, TRANE MDL. AD, S/N N.A. (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX

77040)

78{ Choice of lots: 77, 78 } AC UNIT, TRANE MDL. YSC060EYEMA1800000000000B, S/N 110210538L (Location 1: Fabcorp, Inc., 6951


79 HEATED PRESSURE WASHER, ELITE, S/N N.A. (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

80 DUST COLLECOR, TORIT DONALDSON, 4-cartridge (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

81LOT OF ELECTRIC MOTORS, MARATHON (3), new, 20 HP (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX

77040)

81ALOT OF ELECTRIC MOTORS, INGERSOLL RAND (2), 100 HP (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX

77040)

82SEALED AIR INSTAPAK 900 FOAM IN PLACE SYSTEM, new 2014, w/pumps, gun hoses hanger, w / Instapak work station (Location

1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

83 SEALED AIR INSTAPAK SYSTEM (on one pallet) (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

84FORKLIFT, HYSTER 50, 5,000 LB. CAP., LPG, 3-stage mast, solid tires, 36" forks, 7,846 H.O.M., S/N D187V16664W (Location 1:


85FORKLIFT, MITSUBISHI, 4,500 LB. CAP., LPG, , 3-stage mast, solid tires, 36" forks, 15,519 H.O.M., S/N AF82D02693 (Location 1:


86FORKLIFT, CLARK, 4,000 LB. CAP., LPG, 2-stage mast, solid tires, 36" forks, S/N N.A. (Location 1: Fabcorp, Inc., 6951 West Little


87FORKLIFT, TCM, 3,500 LB. CAP., LPG, 3-stage mast, 48" forks, 10,833 H.O.M., S/N A164U5020 (Location 1: Fabcorp, Inc., 6951 West

Little York Road, Houston, TX 77040)

87AFORKLIFT, CLARK 3,000 LB. CAP., LPG, 2-stage mast, 36" forks, S/N G127 1053-6790FA (Location 1: Fabcorp, Inc., 6951 West Little


88TRUCK TRACTOR, FREIGHTLINER, dual axle, sgl. Cab., 10-spd., diesel, Odo: 372,490 (Location 1: Fabcorp, Inc., 6951 West Little


89FLATBED TRAILER, WILSON TRAILER COMPANY, aluminum, 48' (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston,

TX 77040)

90GOOSENECK TRAILER, 40', wood deck, stake pockets, dual axle, landing gear (Location 1: Fabcorp, Inc., 6951 West Little York Road,

Houston, TX 77040)

91LOT OF PALLET RACK, large lot, over 30 uprights, over 90 cross sections, over 20 mesh inserts in multiple piles, mix of 5000 Lb

sections (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

92 LOT OF JIB CRANES, disassembled (in one pile) (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

93MATERIAL HANDLING SYSTEM,SPANCO, 1,000 LB. CAP., uprights, crossbeams (Location 1: Fabcorp, Inc., 6951 West Little York


93ACARPET CARE SYSTEM, NILFISK ADVANCE ES4000, carpet, 24v, working condition, good batteries, (Location 1: Fabcorp Inc., 6951


94 ROLLUP SHOP DOOR, 20'W X 14' HIGH. (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

95 LOT OF ELECTRICAL BUSWAY, 3-phase, 150V., 70' (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

96 SECTION OF ROLLER CONVEYOR, 8' (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

97WALK BEHIND FLOOR SCRUBBER, ADVANCE AQUAMATIC SELECTRIC, S/N 1961426 (Location 1: Fabcorp, Inc., 6951 West Little


98 DEMAGNITIZER, 1' X 1' (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

99{ Option of lots: 99, 100, 101 } PLASTIC 4-WHEEL HOPPER, RUBBERMAID (Location 1: Fabcorp, Inc., 6951 West Little York Road,

Houston, TX 77040)


Houston, TX 77040)


Houston, TX 77040)

102 LOT OF APPROX. 28 SHOP FANS (in three bins) (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

103 LOT OF APPROX. 37 CHAIRS (on two pallets) (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

104 EYE WASH STATION, BRADLEY (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

105 STENCIL MACHINE, MARSH ELECTRIC MDL. 51525 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

106 SPLIT UNIT OUTDOOR COMPRESSOR, LG, multi-V.5 (Location 1: Fabcorp, Inc., 6951 West Little York Road, Houston, TX 77040)

107LOT OF SPLIT UNIT WALL MOUNT UNITS, DANCOOL (APPROX. 8), new in box (Location 1: Fabcorp, Inc., 6951 West Little York


107A

NORSEMAN STYLE STRUCTURE TENT, 50' w. x 132' l x 10' sides to 17.5' center, w/center power and lights (missing canvas) and

Kedar Track Design (7075 aluminum structure), (The buyer will be responsible for dismantle and removal) (Location 1: Fabcorp, Inc.,

6951 West Little York Road, Houston, TX 7704 ...[more]

170ROBOTIC WELDING SYSTEM, OTC DAIHEN ALMEGA EX-V6, 2002, Robot manipulator, OTC Turbo Pulse 500 DI power source, EX-

C Robot control, S/N 25214009 (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

171 LIFTING ROTARY TABLE, PRESTO P3, S/N V027750-01 (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

172 LOT CONSISTING OF: Graco & Binks paint pots, assorted (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

173WELDING MACHINE, OTC DAIHEN TURBOPULSE 350DF, 2001, S/N P6972YK8161006 ,w / OTC CMH-147 wire feeder, (Location

12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

174WELDING MACHINE, MILLER DELTAWELD 452, S/N LH260400C, w / Miller 70 series wire feeder, S/N LG510611W (Location 12:

Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

175{ Choice of lots: 175, 176 } WELDING MACHINE, MILLER CP302, S/N MC090253V, w / Miller 60 series wire feeder, S/N KG243551

(Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

176{ Choice of lots: 175, 176 } WELDING MACHINE, MILLER CP302, S/N MC090252V, w / Miller 22A wire feeder, S/N MC130386V


177 WELDING MACHINE, LINCOLN CV-305, 2009, S/NU1090102611 (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

178WELDING MACHINE, OTC DAIHEN INVERTER 300P ACCUTIG, 1999, S/N P6946YKK186761001 (Location 12: Hippo Hopper, 27807

Red Fox Rd, Tomball, TX 77377)

179WHOLE HOME GENERATOR, GUARDIAN QUIET SOURCE, BY GENERAC POWER SYSTEMS, ITEM #0052591, new 2012, 32

KVA, 319.7 H.O.M., natural gas S/N 4642460 (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

180 AIR DRYER, ZEKS MDL. 500HSEA400, S/N 120675 (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

181 ROLLER CONVEYOR, approx. 25'L x 36"W (on pallet) (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

182UNIVERSAL SAFETY MAT, SCIENTIFIC TECHNOLOGIES INC. 54 " x 42" tbl. size, S/N AF029693 (Location 12: Hippo Hopper, 27807


183 IN-LINE SPARK TRAP, NORDFAB TRZ-12 SPARK, S/N 4-86560 (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

184 LOT OF CHILLER UNITS, FLOMAX FLOWMASTER 115 (2) (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

185LOT OF CHILLER UNITS(3): Dynaflux, Merek & Miller Coolmate 4, (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX

77377)

186LOT CONSISTING OF: rotating headstock stands, (2) Motoman MH-450 headstocks, 9.8 RPM, 14" faceplate, metal stands & hardware

(PLC not included) (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

187 LOT OF FLOOD LIGHTS (8) (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

188 5TH WHEEL HITCH, CURT E16 (Location 12: Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

189{ Choice of lots: 189, 191, 192 } TORCH CLEANING SYSTEM, ABICOR BINZEL MDL. 831-0490, 2006, S/N 23111 (Location 12: Hippo

Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

190TORCH CLEANING SYSTEM, ABICOR BINZEL MDL. 831-0490, 2005, S/N 21279 (Location 12: Hippo Hopper, 27807 Red Fox Rd,

Tomball, TX 77377)

191{ Choice of lots: 189, 191, 192 } TORCH CLEANING SYSTEM, ABICOR BINZEL MDL. 831-0625, 2012, S/N N.A. (Location 12: Hippo


192{ Choice of lots: 189, 191, 192 } TORCH CLEANING SYSTEM, ABICOR BINZEL MDL. 831-0625, 2012, S/N 10038 (Location 12: Hippo


193LOT OF WATER COOLED WELDING TORCHES (2), Binzel I Cat & Cat 2, Tregaskiss tough gun (Location 12: Hippo Hopper, 27807


194PORTABLE OFFICE BUILDING, STARRCO, insulated walls, lights, ceiling tiles, approx. 15 x 12 x 10'ht., door required (Location 12:

Hippo Hopper, 27807 Red Fox Rd, Tomball, TX 77377)

195FRONT END LOADER, NEW HOLLAND LS180, new 2007, 1484.1 H.O.M., S/N LMU007148 (Location 12: Hippo Hopper, 27807 Red

Fox Rd, Tomball, TX 77377)

196{ Choice of lots: 196, 197 } GALVANIZED STEEL BOX, 4,000 LB. CAP., 12' x 7' x 3'dp., lifting eyes, 16,000 lb. pay load drill quip


197{ Choice of lots: 196, 197 } GALVANIZED STEEL BOX, 4,000 LB. CAP., 12' x 7' x 3'dp., lifting eyes, 16,000 lb. pay load drill quip


198HORIZONTAL BANDSAW, HEM HYDRAULIC MDL. H3236-DC, dual column, saw blade assemble, 32" x 36" hyd. feed clamps, outfeed

roolers, conveyors, 480 v, S/N 625698 (Location 13: Steel Surplus Inc., 7207 Eastex Freeway Service Road, Houston, TX 77093)

200 HORIZONTAL BANDSAW, JET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

201 RADIAL ARM SAW, CRAFTSMAN (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

201ACARBIDE DOUBLE END TOOL GRINDER, ROCKWELL, 1/2 HP (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

201B DOUBLE END GRINDER, 6", 1/3 HP (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

201C TABLE SAW, TRADESMAN, MDL. BTS 10BW, 10" (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

201D SHOP PRESS, CENTRAL HYDRAULICS, 12 T (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

201EVIBRATORY DEBURRING MACHINE, ADJUSTA-VIBE, RAYTECH (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

202VERTICAL BANDSAW, DOALL MDL. DBW-1A, phase-1,S/N V220 (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

203 2ND OPERATION LATHE, HARDINGE (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

2042ND OPERATION LATHE, HARDINGE MDL. DSM-59, dovetail bed, 220 V., 3-phase, 1 HP (Location 8: TIMCO, 2503 ½ Bammel

Timbers Lane, Houston, TX 77068

205LATHE, VICTOR MDL. 1640B, 220 V., 3-phase, S/N 69081970 (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

206 DRILL PRESS, BUFFALO NO. 13, 220 V, 3-phase, S/N 19246 (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

208VERTICAL MILL, ACRA MDL AM-2S, 9" x 42" tbl., X & Y pwr. Feed, DRO, S/N 970025 (Location 8: TIMCO, 2503 ½ Bammel Timbers

Lane, Houston, TX 77068

209CNC VERTICAL MILL, KENT USA MDL. KTM-3VKF, Acu-Rite CNC controller, 10" x 50" tbl., DOM 3/2002, S/N 919072 (Location 8:

TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

211 LOT OF R8 COLLETS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

212 MACHINE VISE, KURT MDL D688, 6" (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

213 TILTING/SWIVEL MACHINE VISE (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

214 INDEXING CHUCK, VERTEX, 6" (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

215 INDEXING CHUCK, YUASA MDL. 550, 8" accu-dex (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

216 INDEXER, KEARNEY & TRECKER, 6", 6-jaw (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

217 LOT OF ANGLE PLATES (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

218LOT CONSISTING OF: C5 vertical collet holder & C5 horizontal 15" indexer (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane,

Houston, TX 77068

219 LOT OF TAPPING HEADS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

220{ Group of lots: 220, 221 } TAPPING HEAD, ENCO MDL. 291/JT6 (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

221 { Group of lots: 220, 221 } RIGHT ANGLE MILLING HEAD (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

222{ Group of lots: 222, 223 } LOT OF MACHINABLE R8 COLLETS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

223 { Group of lots: 222, 223 } LOT OF R8 CHUCKS, 3 & 4-jaw (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

224{ Group of lots: 224, 225 } LOT OF MULTIPLE KNURLING & FOLLOW REST TURNING HOLDERS (Location 8: TIMCO, 2503 1/2

Bammel Timbers Lane, Houston, TX 77068)

225{ Group of lots: 224, 225 } LOT OF TAPMATIC HEADS, w/ chasers (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

226{ Group of lots: 226, 227 } LOT OF ADJUSTABLE BORING HEADS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

227{ Group of lots: 226, 227 } LOT OF ADJUSTABLE BORING HEADS, 3/4', .001" (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane,

Houston, TX 77068

228 LOT OF C5 COLLETS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

229 TOOL POST & HOLDERS, CA6 (China) (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

230 LOT OF LIVE CENTERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

231 LOT OF JACOB CHUCKS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

232 LOT OF JACOB CHUCKS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

233 VERNIER CALIPER, MITUTOYO, 12" (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

234 LOT OF VERNIER CALIPERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

235 LOT OF VERNIER CALIPERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

236 LOT OF VERNIER DIGITAL CALIPERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

237 DIAL BORE GAUGE, FOWLER (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

238 LOT OF OD MICROMETERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

239 OD MICROMETER SET, 0 to 12" (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

240 { Group of lots: 240, 241 } ANGLE GAUGE SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

241 { Group of lots: 240, 241 } RIGHT ANGLE SQUARE SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

242 { Group of lots: 242, 243 } BLOCK GAUGE SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

243 { Group of lots: 242, 243 } BLOCK GAUGE SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

244 { Group of lots: 244, 245 } COMBINATION SQUARE SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

245 { Group of lots: 244, 245 } DEPTH MICROMETER SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

246 PIPE TREADING SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

247 HOLESAW SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

248 TUBE BENDER SET (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

249 TAPPING ARBOR, PHASE II (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

250 STEEL TABLE, w/ vise, 4' x 4' x 1/2" (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

251{ Group of lots: 251, 252 } LOT CONSISTING OF: drill bits & chamfer bits (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston,

TX 77068

252 { Group of lots: 251, 252 } LOT OF TAPS & DIES (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

253 { Group of lots: 253, 254 } LOT OF DRILL BITS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

254 { Group of lots: 253, 254 } LOT OF ENDMILLS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

255LOT OF NEW CARBIDE INSERTS, cabinet & misc. contents included (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston,

TX 77068

256{ Group of lots: 256, 257 } LOT OF HIGH SPEED STEEL BORING BARS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston,

TX 77068

257 { Group of lots: 256, 257 } LOT OF INSERT BORING BARS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

258 { Group of lots: 258, 259 } LOT OF INSERT BORING BARS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

259 { Group of lots: 258, 259 } CARBIDE BORING BAR, 1" (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

260 { Group of lots: 260, 261 } LOT OF SPADE DRILLS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

261{ Group of lots: 260, 261 } LOT OF FABRICATED BORING BARS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

262 { Group of lots: 262, 263, 264 } LOT OF DRILL BUSHINGS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

263{ Group of lots: 262, 263, 264 } LOT OF INSERT TOOL HOLDERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

264{ Group of lots: 262, 263, 264 } LOT OF INSERT TOOL HOLDERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX

77068

265 { Group of lots: 265, 266 } LOT OF INSERT TOOL HOLDERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

266 { Group of lots: 265, 266 } LOT OF INSERT TOOL HOLDERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

267 { Group of lots: 267, 268, 269 } LOT OF SHELL ENDMILLS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

268 { Group of lots: 267, 268, 269 } LOT OF KNURLING TOOLS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

269 { Group of lots: 267, 268, 269 } LOT OF REAMERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

270 { Group of lots: 270, 271, 272 } LOT OF ENDMILLS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

271 { Group of lots: 270, 271, 272 } LOT OF REAMERS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

272 { Group of lots: 270, 271, 272 } LOT OF THREAD GAUGES (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

273

CNC VERTICAL MACHINING CENTER, LEADWELL MCP-OP, 25.6" x 13.7" tbl. size, spindle taper, Cat-40, spindle spd: 60 - 6,000

RPM, Fanuc O-MF, 16 pos. ATC, DOM 5/1992, w/ assorted tooling, S/N L29206004 (Location 8: TIMCO, 2503 ½ Bammel Timbers

Lane, Houston, TX 77068

274CNC LATHE, HAAS MDL. SL-30T, 2.9" thru hole, 12 pos. ATC, 10" 3-jaw Kitagawa chuck, tool setter, w/ assorted tool holders & ER

16C collet chuck, V220, phase 3, DOM D894/2005, S.N 70053 (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

275RECIPRICATING AIR COMPRESSOR, QUINCY MDL. 251CP80VCB, 5 HP, 230V, phase-1, 80 gal. vertical tank. DOM 10/2013, S/N

UTZ552098 (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

276 SHOP FAN (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

277 VACUUM CHUCK (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

278{ Group of lots: 278, 279 } WELDED RACK, 6' X 6' X 24" (Note: no contents) (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane,

Houston, TX 77068

279{ Group of lots: 278, 279 } WELDED RACK, 12' X 6' X 12" (Note: no contents) (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane,

Houston, TX 77068

280 { Group of lots: 280, 281 } SHELF W/CONTENTS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

281{ Group of lots: 280, 281 } A-FRAME MATERIAL RACK & CONTENTS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston,

TX 77068

282 FIBERGLASS LADDER, WERNER, 10' (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

283 LOT OF FATIGUE RUBBER MATS (Location 8: TIMCO, 2503 ½ Bammel Timbers Lane, Houston, TX 77068

300{ Group of lots: 300, 301 } LOT OF HD EXTENSION CORDS (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX

77306)

301{ Group of lots: 300, 301 } LOT OF RYOBI CHAINSAW AND LEAF BLOWER, OXY/ACCET BOTTLE CART (Location 9: Unisert

Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

302 { Group of lots: 302, 303 } WOOD PLANER, RYOBI (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

303{ Group of lots: 302, 303 } LOF OF ASSORTED POWER TOOLS, CIRCULAR SAW, HEATGUN, DRILL, PNEUMATIC NAILER,

ROUTER AND BELT SANDER (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

304 TOOL BOX W/ASSORTED TOOLS (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

305 PORTABLE STORAGE/TOOL BOX W/CONTENTS (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

306PIPELINE VIDEO INSPECTION RETRIEVAL WINCH, RS SERVICES, (Location 9: Unisert Multiwall Systems, 13295 Rocky Road,

Conroe, TX 77306)

307LOT OF ASSORTED TOOLS AND MISC. CONTENTS, LOCATED ON SEVERAL WORK BENCHES, PEGBOARDS AND METAL

SHELVES (SHELVING INCLUDED) (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

308PORTABLE AIR COMPRESSOR, PORTER CABLE.135 psi, 5.3 dfm, 1.6 hp, 20 gal., (Location 9: Unisert Multiwall Systems, 13295

Rocky Road, Conroe, TX 77306)

309 BANDING CARTS (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

310 MITER SAW, RIDGID, w/portable stand (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

311 TABLE SAW, RIDGID (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

31212V PRESSURE SPRAYER AND TAK W/SMALL UTILITY TRAILER (Location 9: Unisert Multiwall Systems, 13295 Rocky Road,

Conroe, TX 77306)

313PORTABLE GENERATOR, TAHOE MDL. TI9000LXU, 450cc, 9k watts, dual voltage, electric start . (Location 9: Unisert Multiwall

Systems, 13295 Rocky Road, Conroe, TX 77306)

314BAYOU 4-WHEELER, KAWASAKI 220, VIN JKBLFA16YB765167 (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe,

TX 77306)

315 HYDRAULIC FLOOR JACK & STANDS (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

316 HYDRAULIC FLOOR JACK (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

317PIPE LOCATION DETECTOR, RADIODETECTION LTD., TRANSMITER AND RECEIVER (Location 9: Unisert Multiwall Systems,

13295 Rocky Road, Conroe, TX 77306)

318 MILL DRILL, MDL. RF30, drill/milling machine. (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

319 LATHE, MDL. C6233A, 3&4 jaw chuck, . (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

320{ Group of lots: 320, 321 } HIGH PRESSURE CHEMICAL PUMP, TEXTSTREAM, MDL. MSM 500 (Location 9: Unisert Multiwall


321{ Group of lots: 320, 321 } OXY ACETYLENE TORCH CART with Bottles, hose & regulators (Location 9: Unisert Multiwall Systems,


322 HD STEEL TABLE W/VISE (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

323 HYDRAULIC ENGINE HOIST (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

324PRESSURE WASHER, COLEMAN, POWERMATE, 3500 PSI (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX

77306)

325 ARC WELDER, MILLER, THUNDERBOLT (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

326 { Group of lots: 326, 327 } LOT OF ENGINE HOISTS (2) (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

327{ Group of lots: 326, 327 } FUEL TRANSFER TANK AND PUMP (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe,

TX 77306)

328 PALLET JACK (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

329 { Group of lots: 329, 330 } CONTENTS OF SHELVES (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

330 { Group of lots: 329, 330 } LOT OF FLY ASH (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

331FORKLIFT, HYSTER MDL. 5500, approx. 4,000 lb. cap., S/N 002D21413Z, (out of service) (Location 9: Unisert Multiwall Systems,


332 SKID MOUNTED BATCHING SYSTEM (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

333 SHIPPING CONTAINER, Approx. 96" x 30', w/contents (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

334 SHIPPING CONTAINER, Approx. 96" x 40', w/contents (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

335TEAR DROP RACK AND CONTENTS, INCLUDES WINCH (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX

77306)

336 ROLLUP DOORS (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

337 LOT OF STEEL PIPE W/CONCRETE LINING (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

338LOT OF FLATBED TRAILERS, approx. 42', triple axles, pintle hitch, out of service, (Location 9: Unisert Multiwall Systems, 13295 Rocky

Road, Conroe, TX 77306)

339 LOT OF HD PIPE RACKS, APPROX. 10 SECTIIONS (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

340{ Group of lots: 340, 341 } TRUCK CARGO BOX (NO TRUCK) USED AS MOBILE FIELD OFFICE (Location 9: Unisert Multiwall


341{ Group of lots: 340, 341 } GOOSENECK TRAILER, 1995 ODOM 20’, 6,000 Lb. G.V.W.R. (Location 9: Unisert Multiwall Systems, 13295

Rocky Road, Conroe, TX 77306)

342 20' UTILITY TRAILER (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

343TRACTOR LOADER BACKHOE, KUBOTA MDL. L35, brush hog, TL720 (Location 9: Unisert Multiwall Systems, 13295 Rocky Road,

Conroe, TX 77306)

344 BOX BLADE ATTACHMENT (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

345 AUGER for Kubota (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

346 BACKHOE ATTACHMENT, KUBOTA MDL. BT-90 (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

348{ Choice of lots: 348, 349 } TRUCK, 2004 FREIGHTLINER 2-1/2 T. CAP., diesel pwrd., long wheel base, (2) tanks, VIN

1FVACWCT14HN21115 (Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

349{ Choice of lots: 348, 349 } TRUCK, 2005 FREIGHTLINER 2 T. CAP., diesel pwrd., (2) tanks, hoist, VIN 1FVACWCT96HW63831

(Location 9: Unisert Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

349A ROUGH TERRAIN CRANE, GROVE RT 58/58A, 58' BOOM LENGTH 28,000 LB. CAP. @ 10' RADIUS, 2,000 LB. CAP @ 58' RADIUS

350SPORT COUPE, 1996 MITSUBISHI MDL. 3000GT, V6 engine, Odo: 195,423 miles, VIN JA3AM44H7VY002075 (Location 9: Unisert

Multiwall Systems, 13295 Rocky Road, Conroe, TX 77306)

351LOT OF ARADLITE, MDL. AV4738/HV4739 WA, APPROX. 17 CASES, (Location 9: Unisert Multiwall Systems, 13295 Rocky Road,

Conroe, TX 77306)

353FOUR-POST TUFF BUILT QUARD FRAME MOBILE FALL PROTECTION SYSTEM (Location 10: Liberty Plant Maintenance, 1825

County Road 614, Dayton, TX 77535)

354{ Choice of lots: 354, 355 } TWO-POST TUFF BUILT MOBILE SAFETY A-FRAM FALL PROTETCTION SYSTEM (Location 10: Liberty

Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

355{ Choice of lots: 354, 355 } TWO-POST TUFF BUILT MOBILE SAFETY A-FRAME FALL PROTECTION SYSTEM (Location 10: Liberty


356WELDING MACHINE, AIRCO MDL. 3DVR-24B, S/NL218002 (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton,

TX 77535)

357TIG WELDER, CHEMETRON AC/DC 250 MDL. 716-258, output 30 DCV, 260 amp., Input 208/230/460, 89/80/40 amps, duty cycle-

single phase 2100H (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

358

UNITED CARBIDE WELDING PRODUCTS, LINDE POWER SUPPLY TYPE HDA 300 - S/N C3660385, Specification 2100H/935, A.C.

Input 208/230/460 V, 50/60 cycles, 600/90/45 Amperes, A.C. Output 300 Amperes, 32 V, 60% duty cycle (Location 10: Liberty Plant

Maintenance, 1825 County Road 614, Dayton, TX 77535)

359STORAGE TANK (BLUE), built 2007,150 PSI, 1160 gal cap., 26” OD x 260” L, S/N 23602 (Location 10: Liberty Plant Maintenance,

1825 County Road 614, Dayton, TX 77535)

360JIB CRANE (YELLOW), ½ T.ht., 11’ arm length, 16’ (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX

77535)

361FIRE EXTINGUISHING SYSTEM, ANSUL MDL. X 450/100, w / hoses, tested to 440 PSI (30.3 bar) Part No. 72417 (Location 10: Liberty


362 WORKBENCH, 44.5” x 46” x 3’ w / Wilton vise (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

363{ Group of lots: 363, 364 } LEESON SHOP FAN, CAT NO 110023.00 ENCL TERO, MDL. M6C17FB8G, 1725 RPM, 60 HZ, V 115 200 /

250V (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

364

{ Group of lots: 363, 364 } TECO SHOP FAN, w / Teco 3- phase induction motor, 5HP 4P Type AEEA, TEFC 184T, , 230/460 V Hz 60.

usable on 208 V Networks at 14 AMP, S/N LU45258034 (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX

77535)

365COOLING TOWER, REYMSA MDL. HRFG 505105, motor, 5 HP, 230/460V 13.8/6.9 amps, 1170 RPM, 60 Hz, S/N

H45M2J1143H11431065 (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

366JIB CRANE, 1/2 T. CAP., 17' 16.5" ht., 15'6" arm length (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX

77535)

367{ Group of lots: 367, 368 } SHOP FAN, 5'2" (No motor) (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX

77535)

368{ Group of lots: 367, 368 } SHOP FAN, 5'2" (No motor) (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX

77535)

369 DIE LIFT CART (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

370 GEKA IRON WORKER, HYDRACROP 100-5 (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

371

FORKLIFT, TAYLOR 15,000 LB. CAP. MDL.TEC-150L, 48" load CTR, safe working capacity w/factory equipped options: 12,500 lb. @

48" load CTR, total vehicle wt. 56,550 lbs., steer axle wt. 19,250 lbs., front axle 1200x20, 14/95 rear axle 1200x20, 14/75, S/N S-HO-

17595 (Location 10: Liberty Plant Maintena ...[more]

372 TOOL CABINET & WORKSTATION, RED LIST (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

373 LARGE VENEER STORAGE SHELVES (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

374HOIST, COFFING MDL. JLC2016 3LCX, 1 T. CAP., 3-phase, S/N JMA0591ND (Location 10: Liberty Plant Maintenance, 1825 County

Road 614, Dayton, TX 77535)

375 LOT OF PNEUMATIC TOOLS (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

376STAINLESS STEEL TANK FILLING SYSTEM & MEASURSING DEVICE (Location 10: Liberty Plant Maintenance, 1825 County Road

614, Dayton, TX 77535)

377{ Group of lots: 377, 378 } LOT OF CHAIN & RATCHET BINDERS (Location 10: Liberty Plant Maintenance, 1825 County Road 614,

Dayton, TX 77535)

378 { Group of lots: 377, 378 } LOT OF PLATE DOGS (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

379{ Group of lots: 379, 380 } LARGE SET OF GRAY LOCKERS (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton,

TX 77535)

380{ Group of lots: 379, 380 } SMALL SET OF GRAY LOCKERS (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton,

TX 77535)

381BOX TRUCK, WHITE FORD E450, VIN: 1FDXE45P16DA72383 (Note: has bad head gasket) (Location 10: Liberty Plant Maintenance,

1825 County Road 614, Dayton, TX 77535)

382 LOT OF CHAIN FALLS (3), w / long drift (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

383 VINTAGE FORD PICKUP, 1938 (Note: No Title) (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

384 FOUR WAY SPREADER, 10' (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

385 TWO-WAY SPREADER WITH SHORTENER, 6' (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

386 TWO-WAY SPREADER WITH SHORTENER, 6' (Location 10: Liberty Plant Maintenance, 1825 County Road 614, Dayton, TX 77535)

386AAIR RECEIVING TANK, MANCHESTER, 2560 GAL., 2004, Cat. #302451 (Location 10: Liberty Plant Maintenance, 1825 County Road

614, Dayton, TX 77535)

386BPEDESTAL JIB CRANE, GAFFEY 1.5 T., air hoist, 18' boom, 17.5" to bottom of boom (Location 10: Liberty Plant Maintenance, 1825

County Road 614, Dayton, TX 77535)

386CPEDESTAL JIB CRANE, GORBEL 2 T, coffing elect. Chain hoist, 18' boom, 14'3" to bottom of boom (Location 10: Liberty Plant

Maintenance, 1825 County Road 614, Dayton, TX 77535)

387

TUBE MILL, ROBIN, (15) station heads w/(2) extra station heads, .125” finish dia., rotary table & feed system for take-up of finished

product, Littell uncoiler, Mdl. Z512, 2,500 lb. cap., 12”W., 14 to 21 I.D., 54” O.D (Location 14: Devasco International, 1626 South Cherry

Street, Tomball, TX 773 ...[more]

388

{ Choice of lots: 388, 389 } DIE STYLE WIRE DIAMETER REDUCTION SYSTEM, THE COULTER-MCKENZIE MACHINE, (6) cap

stand & reducing die holders & take-up reel, w/rotary table, (Location 14: Devasco International, 1626 South Cherry Street, Tomball, TX

77375)

389

{ Choice of lots: 388, 389 } DIE STYLE WIRE DIAMETER REDUCTION SYSTEM, THE COULTER-MCKENZIE MACHINE, (4) cap

stand & (5) reducing die holders & take-up reel, w/rotary table, (Location 14: Devasco International, 1626 South Cherry Street, Tomball,

TX 77375)

390WIRE COILING MACHINE, GIMAX WIRE MACHINERY, straightening rolls & spooler, S/N 041001ES-165BP (Location 14: Devasco

International, 1626 South Cherry Street, Tomball, TX 77375)

391VACUUM PACKER, MULTI VAC MDL. C500, new 2004, (2) 28" x 26" tables, S/N 2716 (Location 14: Devasco International, 1626 South

Cherry Street, Tomball, TX 77375)

392CAR BOTTOM FURNACE, 7' W. X 9' DEEP X 7' HEIGHT CAP., approx. 1,400 degree max. temp. (Location 15: Texas Stress, Inc.,

1304 Underwood Road, La Porte, TX 77571)

393SIDE LOADER, RAYMOND, MDL. 076-SL100TF, 10,000 LB. CAP., 1999, battery operated, (Location 17: Steel Effects, 12300 Zavalla

St., Houston, TX 77085)

394{ Group of lots: 394, 394A } LOT OF (3) MIG GUNS, TWECO M2154045, new in box, (Location 17: Steel Effects, 12300 Zavalla St.,

Houston, TX 77085)

394A{ Group of lots: 394, 394A } LOT OF (3) MIG GUNS, (2) TWECO, (1) PROFAX, (Location 17: Steel Effects, 12300 Zavalla St., Houston,

TX 77085)

395LOT OF BOSCH DRILL MOTOR W/BATTERY & CHARGER & BOSCH GPL 3 3-POINT SELF LEVELING LASER (Location 17: Steel

Effects, 12300 Zavalla St., Houston, TX 77085)

396{ Group of lots: 396, 397 } LOT OF DEWALT ELECRIC POWER TOOLS (Location 17: Steel Effects, 12300 Zavalla St., Houston, TX

77085)

397{ Group of lots: 396, 397 } LOT OF MILWAUKEE ELECTRIC POWER TOOLS (Location 17: Steel Effects, 12300 Zavalla St., Houston,

TX 77085)

398 LOT OF ASSORTED WELDING WIRE & FLUX MATERIAL (Location 17: Steel Effects, 12300 Zavalla St., Houston, TX 77085)

399 LOT OF COVERALLS (7) BOXES, ASSORTED SIZES (Location 17: Steel Effects, 12300 Zavalla St., Houston, TX 77085)

400 LOT OF WORK GLOVES (Location 17: Steel Effects, 12300 Zavalla St., Houston, TX 77085)

401LOT OF ASSORTED TOOLING, INCLUDING 50 TAPER TOOL HOLDERS (Location 17: Steel Effects, 12300 Zavalla St., Houston, TX

77085)

plant & machinery inc. - bidspotter.com

Documents