plasterboard plasterboard ceilings ceiling 9.1/d113 … · to suit the type of slab.the distance...
TRANSCRIPT
PLASTERBOARD CEILINGS9.1/D113 FIRE PROTECTION ACC: TO DIN 4102 PART4
As 0403 BO
Gypsum Plasterboard CeilingScrew Fixing– one level suspension system –
Properties and application• Corrosion resistant, galvanised steel single level
suspension system for screw fixing full sizeplasterboard panels.
• A variety of design options, from a flush seam-less finish to asymmetrical arrangements, with a plain finish.
• Perforated or slotted finish, offering aestheticdesign and sound absorption.
• Fire protection up to F120 (2 hours).• Proven applications in historical buildings,
prefabricated houses, residential and adminis-tration buildings, schools, hospitals, hotels,factories and warehouses.
Lightings, AC-outlets, sprinklers loudspeakers,etc, have to be suspended separately!
Technical data and propertiesSuspension system galvanized steel sectionsConstruction one level, 2 directional fixingCeiling cladding plasterboardSuspension depth acc. to DIN 4102, Part 4Thickness of boards in mm 9.5, 12.5, 15, 18, 25 mmSurface of boards plain, perforated or slottedWeight of ceiling kg/m2 15 – 20Ceiling test acc. to DIN 18168 Part 2Fire protection F30 – F120 (30 minutes up to two hours) acc. to DIN 4102 Part 4
P L A S T E R B O A R DC E I L I N G 9.1/D113
1 4
RICHTER SYSTEMUnit 18, Fairway DriveGreenford · London · UB6 8PWTel.:+44-208 74774 80, Fax: + 44-208 74774 89eMail: [email protected]
RICHTER SYSTEM GmbH & Co. KGPostfach 1120, 64343 GriesheimTel.:+49-6155/876-2 36, Fax: 0 6155/876-2 37eMail: [email protected]://www.richtersystem.com
In line with the Richter System policy of continuous improvement we reserve the right to make any modifications, technical alterations without prior notice. Any guarantee is limited to materials only. Stated constructional, static and physical data can only be achieved when Richter System components, or components recommended in writing by Richter System are exclusively used. Statements concerning quantity and installation are based on past experience and are guide purposes only,and should not automatically be applied to different applications. All rights reserved. Alterations, re-prints and Photostat copies, even in part, are forbidden without prior written authorisation from RICHTER SYSTEM PO box 1120, Griesheim Germany.
QUALITY MANAGEMENT SYSTEM
DIN EN ISO 9001
ENVIRONMENTAL MANAGEMENT SYSTEM
DIN EN ISO 14001
Installation guideDepending on application and on thickness ofboards, the CD main carriers have to be fastenedwith hangers to the slab with a distance of 1.250 mm on centres.Metal anchors, expansion bolts, have to be selectedto suit the type of slab. The distance betweenhangers and CD carriers depends on the thicknessof the boards. (See table 1)Wherever CD carriers have to be connected to eachother, CD connectors have to be used to achieve aproper connection. All abutments of CD carriershave to be staggered, and to be secured withhangers to the slab in a distance of max.100 mmfrom each connector. CD cross sections areconnected to the CD main carriers with one levelcross connectors. The plasterboards are fixed to
the CD carriers with self tapping screws Black Star® type 1, or similar. The maximumdistance between the screws is shown on table 1.Wall alignments have to be executed according tothe details of “Wall Alignments”. To achieve a firerated construction, the wings of the crossconnectors have to be bent down. If the ceilingweight exceeds 0,24 kN/m2, the wings have to befastened to the CD carriers with self tappingscrew type LN 3,5�9 mm. In case the load isexceeding 0,4 kN/m2 also the SYTRA rigid –hangers have to be fastened with these LNscrews to the CD carriers. In case access panelsare integrated in this type of ceiling, the details of data sheet 9.1/D113, 9.2/W112 “Access Panels”have to be respected.
Slab type I to IIIwith suspended ceilings out of plain fire ratedplasterboards
Suspended ceilings with fire ratedplasterboards acc. to DIN 18180with plain fire rated plasterboards.Flame spread from below and /or above.
Timber structural ceilings
One level cross connector
Classification of structural ceiling acc. to DIN 4102 Part 2
Fire resistance classes
Susp
ensi
on s
yste
m
Dist
ance
of m
ain
carr
ier
cent
res
mm
Dist
ance
of h
ange
rs
mm
Dist
ance
of c
ross
car
rier
mm
Thic
knes
s of
pla
ster
boar
d
mm
Min
eral
woo
l in
ceili
ng c
avity
mm
Min
.sus
pens
ion
dept
hlo
wer
leve
l of s
truct
ural
ceili
ng u
pper
leve
l of
plas
terb
oard
s
Certi
ficat
ion
I II III
Met
al m
onol
evel
susp
ensi
on
1250
750
500
12.5 without
650
750
650
650
15
400
12.5
15
18
with
without
≥ 40
≥ 80
F 30 AF 30 A
F 30 A
F 60 A
F 90 A
F 120 A
DIN 4102Part 4,Section6.5.5,
Tab. 99,test
certificate,report
Classification of fire protection
In case of flame spread frombelow, fire protection class“suspended ceiling only”applies to all constructioncomponents in the cavity ofthe suspended ceiling.Su
spen
sion
sys
tem
Dist
ance
of m
ain
carr
ier
cent
res
mm
Dist
ance
of h
ange
rs
mm
Dist
ance
of c
ross
car
rier
mm
Thic
knes
s of
pla
ster
boar
d
mm
Min
eral
woo
l in
ceili
ng c
avity
mm
Min
.sus
pens
ion
dept
h lo
wer
leve
l of s
truct
ural
cei
ling
uppe
r lev
el o
f pla
ster
boar
ds
Certi
ficat
ion
Met
al m
onol
evel
susp
ensi
on
650
≥ 0
DIN 4102Part 4,Section6.5.7,
Tab. 102,test
certificate,report
Timber structural ceiling with concealed joists
Dist
ance
of m
ain
carr
ier
cent
res
mm
Dist
ance
of h
ange
rs
Dist
ance
of c
ross
car
rier
Thic
knes
s of
pla
ster
boar
d
Susp
ensio
n dep
th bo
tton f
ace
struc
tura
l ceil
ing to
top f
ace p
anels
Min
eral
fibr
ein
sula
tion
in v
oids
betw
een
ribs
or jo
ists
Certi
ficat
ion
DIN 4102Part 4,
Section 5,Tab. 56and 57,report,
testcertificate
500 2�12.5
1250
perm
itted
F 30 A
F 60 A
F 90 A
1 Bottom panels 2 Top panels
Woo
d ba
sed
pane
lsR
≥60
0 kg
/m3
Tong
ued
boar
ds
Thick.mm
Thick.mm
Thick.mm
Thick.mm
Thick.mm
Thick.mm
Gyps
um p
last
erbo
ard
Min
eral
fibr
e in
sula
tion,
min
.B2
to D
IN 1
8165
bulk
den
sity
≥30
kg/
m3
Gyps
um m
orta
ror
asp
halt
Woo
d ba
sed
pane
ls,
timbe
r boa
rd o
r par
quet
3 Floor construction forfire load from above
from below from aboveFire resistance classes
kg/m3 mm
≥ 30 ≥ 6013 –
F 30 B
F 60 B
F 30 B
F 60 B
2�9.5 – – –
In connection with our quality managementsystem (ISO 9001 certified) governing thedevelopment and manufacture of ourproducts, we offer a full guarantee, providedthat only RICHTER SYSTEM components areused.
per-mitted
650 500 15
400 400 18 +15
400 400 25 +18
40
flame spread from below flame spread from above
In case of flame spread withinthe cavity of the suspendedceiling, all construction com-ponents above the suspendedceiling have to have min. thesame classification as thesuspended ceiling.
F 30 A
F 30 A
9.5 – – 16
– 15 – 16
3�9.5 – – –9.5 – 20 –9.5 – – 25– 15 20 –
– 2116 –– 21
permitted
≥ 30 ≥ 6013 –– 2119 –– 27
permitted
≥ 0
mm mm mm mm
1250650 500 15650 400
12.5750 500
650500
400
2�12.5
2 3
P L A S T E R B O A R DC E I L I N G 9.1/D113
C E I L I N G C O N S T R U C T I O N9.1/D113 B I LL OF MATER IAL
tested acc. to DIN 18168 Part 2 A = max. 1250 mmB = See table 1C = max. 1220 mmD = max. 200 mmE = See table 1F = max. 100 mm
BILL OF MATERIAL per m2 ceiling. Loss and wastage not included. Calculation is based on an area of 10 m�10 m = 100 m2
Plasterboard ceiling, system 9.1 Plasterboard Fire rated plasterboard
Plasterboard thickness mm 12.5 2�12.5 12.5 15 18 2�12.5 18+15 25+18
No. Part Name RICHTER SYSTEM PackingPart Number Unit
1 Multi quick fix hanger 252825000000 Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 –
2 Wire rod 253301. . . . . . . Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 –
3 FIX anchor rigid hanger 252905800000 Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 –
4 Upper nonius hanger 253204. . . . . . . Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 1.2
5 Clip 253308000000 Nr 100 1.6 2.4 2.0 2.4 2.4 2.4 3.8 2.4
6 Wire rod hanger 252809100000 Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 –
7 SYTRA rigid nonius hanger 252905500000 Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 1.2
8 One level cross connector 253402310000 Nr 50 1.7 1.7 1.7 1.7 2.1 1.7 2.1 2.1
9 CD main carrier 60�4.000 mm 123064002000 48 m 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
10 CD cross carrier 60�1.119 mm 123061192000 Nr 12 2.1 2.1 2.1 2.1 2.6 2.1 2.6 2.6
11 CD connector 253402000000 Nr 100 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
12 Plasterboard as required
13 Direct fastener 2529351. . . . . . Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 1.2
14 Perimeter trim UD 27/28 110143002600 48 m as required for wall junction
15 Resilient bar 140164002001 40 m as required
16 BLACK STAR® screw TN, Type 1, 25 mm 311235251400 Nr 1000 23 9 23 23 – 9 – –
17 BLACK STAR® screw TN, Type 1, 35 mm 311235351400 Nr 1000 – 23 – – 26 23 10 15
18 BLACK STAR® screw TN, Type 1, 42 mm 311235421400 Nr 1000 – – – – – – 26 –
19 BLACK STAR® screw TN, Type 1, 57 mm 311235571400 Nr 1000 – – – – – – – 29
20 Self tapping screw LN 3.5�9 mm 344435091400 Nr 1000 – 6.8 – – – 6.8 7 8.4
Table 1 Plasterboard Fire rated plasterboardConstruction details
Thickness of plasterboard mm 12.5 12.5 15 18 2�12.5 12.5 15 18 12.5 15 18 2�12.5 18+15 25+18
Ceiling weight kN/m2 < 0.15 > 0.15 ≤ 0.30 > 0.30 ≤ 0.50 –
Distance of main carrier o.c. A mm 1250 1250 1250 1250Distance of hangers o.c. B mm 1000 650 400 750 650 650 650 400 400Distance of cross carrier o.c. C mm 500 500 550 625 500 500 550 625 500 500 400 500 400 400
Min. suspension depth mm 138 138 140 143 150 138 140 143 138 140 143 150 158 168
Direct fastener 43 43 46 49 56 43 46 49 43 46 49 56 64 74
Distance of screws o.c. mm 170 170 170 170 170 170 170 170 170 170 170 170 170 150Length of screws mm 25 25 25 35 25+35 25 25 35 25 25 35 25+35 35+42 42+57
In case a fire rated ceiling is connected to a firerated plasterboard partition which has a higher firerating than the ceiling, the horizontal plasterboardstrip is not required under the following conditions:
Ceiling F 30 � Partition F 90Ceiling F 90 � Partition F 180
Wall alignments
Steel access panels Plasterboard/fireboard access panels
Alignments to plasterboard partitions
Flame spreadfrom below
Flame spreadfrom above
Flame spread from both sides
Fireresistantboard
Fireresistantboard
plaster-boardstrips
plaster-boardstrips plaster-
boardstrips
plaster-boardstrips
Fireresistantboard
2 3
P L A S T E R B O A R DC E I L I N G 9.1/D113
C E I L I N G C O N S T R U C T I O N9.1/D113 B I LL OF MATER IAL
tested acc. to DIN 18168 Part 2 A = max. 1250 mmB = See table 1C = max. 1220 mmD = max. 200 mmE = See table 1F = max. 100 mm
BILL OF MATERIAL per m2 ceiling. Loss and wastage not included. Calculation is based on an area of 10 m�10 m = 100 m2
Plasterboard ceiling, system 9.1 Plasterboard Fire rated plasterboard
Plasterboard thickness mm 12.5 2�12.5 12.5 15 18 2�12.5 18+15 25+18
No. Part Name RICHTER SYSTEM PackingPart Number Unit
1 Multi quick fix hanger 252825000000 Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 –
2 Wire rod 253301. . . . . . . Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 –
3 FIX anchor rigid hanger 252905800000 Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 –
4 Upper nonius hanger 253204. . . . . . . Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 1.2
5 Clip 253308000000 Nr 100 1.6 2.4 2.0 2.4 2.4 2.4 3.8 2.4
6 Wire rod hanger 252809100000 Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 –
7 SYTRA rigid nonius hanger 252905500000 Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 1.2
8 One level cross connector 253402310000 Nr 50 1.7 1.7 1.7 1.7 2.1 1.7 2.1 2.1
9 CD main carrier 60�4.000 mm 123064002000 48 m 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
10 CD cross carrier 60�1.119 mm 123061192000 Nr 12 2.1 2.1 2.1 2.1 2.6 2.1 2.6 2.6
11 CD connector 253402000000 Nr 100 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
12 Plasterboard as required
13 Direct fastener 2529351. . . . . . Nr 100 0.8 1.2 1.0 1.2 1.2 1.2 1.9 1.2
14 Perimeter trim UD 27/28 110143002600 48 m as required for wall junction
15 Resilient bar 140164002001 40 m as required
16 BLACK STAR® screw TN, Type 1, 25 mm 311235251400 Nr 1000 23 9 23 23 – 9 – –
17 BLACK STAR® screw TN, Type 1, 35 mm 311235351400 Nr 1000 – 23 – – 26 23 10 15
18 BLACK STAR® screw TN, Type 1, 42 mm 311235421400 Nr 1000 – – – – – – 26 –
19 BLACK STAR® screw TN, Type 1, 57 mm 311235571400 Nr 1000 – – – – – – – 29
20 Self tapping screw LN 3.5�9 mm 344435091400 Nr 1000 – 6.8 – – – 6.8 7 8.4
Table 1 Plasterboard Fire rated plasterboardConstruction details
Thickness of plasterboard mm 12.5 12.5 15 18 2�12.5 12.5 15 18 12.5 15 18 2�12.5 18+15 25+18
Ceiling weight kN/m2 < 0.15 > 0.15 ≤ 0.30 > 0.30 ≤ 0.50 –
Distance of main carrier o.c. A mm 1250 1250 1250 1250Distance of hangers o.c. B mm 1000 650 400 750 650 650 650 400 400Distance of cross carrier o.c. C mm 500 500 550 625 500 500 550 625 500 500 400 500 400 400
Min. suspension depth mm 138 138 140 143 150 138 140 143 138 140 143 150 158 168
Direct fastener 43 43 46 49 56 43 46 49 43 46 49 56 64 74
Distance of screws o.c. mm 170 170 170 170 170 170 170 170 170 170 170 170 170 150Length of screws mm 25 25 25 35 25+35 25 25 35 25 25 35 25+35 35+42 42+57
In case a fire rated ceiling is connected to a firerated plasterboard partition which has a higher firerating than the ceiling, the horizontal plasterboardstrip is not required under the following conditions:
Ceiling F 30 � Partition F 90Ceiling F 90 � Partition F 180
Wall alignments
Steel access panels Plasterboard/fireboard access panels
Alignments to plasterboard partitions
Flame spreadfrom below
Flame spreadfrom above
Flame spread from both sides
Fireresistantboard
Fireresistantboard
plaster-boardstrips
plaster-boardstrips plaster-
boardstrips
plaster-boardstrips
Fireresistantboard
PLASTERBOARD CEILINGS9.1/D113 FIRE PROTECTION ACC: TO DIN 4102 PART4
As 0403 BO
Gypsum Plasterboard CeilingScrew Fixing– one level suspension system –
Properties and application• Corrosion resistant, galvanised steel single level
suspension system for screw fixing full sizeplasterboard panels.
• A variety of design options, from a flush seam-less finish to asymmetrical arrangements, with a plain finish.
• Perforated or slotted finish, offering aestheticdesign and sound absorption.
• Fire protection up to F120 (2 hours).• Proven applications in historical buildings,
prefabricated houses, residential and adminis-tration buildings, schools, hospitals, hotels,factories and warehouses.
Lightings, AC-outlets, sprinklers loudspeakers,etc, have to be suspended separately!
Technical data and propertiesSuspension system galvanized steel sectionsConstruction one level, 2 directional fixingCeiling cladding plasterboardSuspension depth acc. to DIN 4102, Part 4Thickness of boards in mm 9.5, 12.5, 15, 18, 25 mmSurface of boards plain, perforated or slottedWeight of ceiling kg/m2 15 – 20Ceiling test acc. to DIN 18168 Part 2Fire protection F30 – F120 (30 minutes up to two hours) acc. to DIN 4102 Part 4
P L A S T E R B O A R DC E I L I N G 9.1/D113
1 4
RICHTER SYSTEMUnit 18, Fairway DriveGreenford · London · UB6 8PWTel.:+44-208 74774 80, Fax: + 44-208 74774 89eMail: [email protected]
RICHTER SYSTEM GmbH & Co. KGPostfach 1120, 64343 GriesheimTel.:+49-6155/876-2 36, Fax: 0 6155/876-2 37eMail: [email protected]://www.richtersystem.com
In line with the Richter System policy of continuous improvement we reserve the right to make any modifications, technical alterations without prior notice. Any guarantee is limited to materials only. Stated constructional, static and physical data can only be achieved when Richter System components, or components recommended in writing by Richter System are exclusively used. Statements concerning quantity and installation are based on past experience and are guide purposes only,and should not automatically be applied to different applications. All rights reserved. Alterations, re-prints and Photostat copies, even in part, are forbidden without prior written authorisation from RICHTER SYSTEM PO box 1120, Griesheim Germany.
QUALITY MANAGEMENT SYSTEM
DIN EN ISO 9001
ENVIRONMENTAL MANAGEMENT SYSTEM
DIN EN ISO 14001
Installation guideDepending on application and on thickness ofboards, the CD main carriers have to be fastenedwith hangers to the slab with a distance of 1.250 mm on centres.Metal anchors, expansion bolts, have to be selectedto suit the type of slab. The distance betweenhangers and CD carriers depends on the thicknessof the boards. (See table 1)Wherever CD carriers have to be connected to eachother, CD connectors have to be used to achieve aproper connection. All abutments of CD carriershave to be staggered, and to be secured withhangers to the slab in a distance of max.100 mmfrom each connector. CD cross sections areconnected to the CD main carriers with one levelcross connectors. The plasterboards are fixed to
the CD carriers with self tapping screws Black Star® type 1, or similar. The maximumdistance between the screws is shown on table 1.Wall alignments have to be executed according tothe details of “Wall Alignments”. To achieve a firerated construction, the wings of the crossconnectors have to be bent down. If the ceilingweight exceeds 0,24 kN/m2, the wings have to befastened to the CD carriers with self tappingscrew type LN 3,5�9 mm. In case the load isexceeding 0,4 kN/m2 also the SYTRA rigid –hangers have to be fastened with these LNscrews to the CD carriers. In case access panelsare integrated in this type of ceiling, the details of data sheet 9.1/D113, 9.2/W112 “Access Panels”have to be respected.
Slab type I to IIIwith suspended ceilings out of plain fire ratedplasterboards
Suspended ceilings with fire ratedplasterboards acc. to DIN 18180with plain fire rated plasterboards.Flame spread from below and /or above.
Timber structural ceilings
One level cross connector
Classification of structural ceiling acc. to DIN 4102 Part 2
Fire resistance classes
Susp
ensi
on s
yste
m
Dist
ance
of m
ain
carr
ier
cent
res
mm
Dist
ance
of h
ange
rs
mm
Dist
ance
of c
ross
car
rier
mm
Thic
knes
s of
pla
ster
boar
d
mm
Min
eral
woo
l in
ceili
ng c
avity
mm
Min
.sus
pens
ion
dept
hlo
wer
leve
l of s
truct
ural
ceili
ng u
pper
leve
l of
plas
terb
oard
s
Certi
ficat
ion
I II III
Met
al m
onol
evel
susp
ensi
on
1250
750
500
12.5 without
650
750
650
650
15
400
12.5
15
18
with
without
≥ 40
≥ 80
F 30 AF 30 A
F 30 A
F 60 A
F 90 A
F 120 A
DIN 4102Part 4,Section6.5.5,
Tab. 99,test
certificate,report
Classification of fire protection
In case of flame spread frombelow, fire protection class“suspended ceiling only”applies to all constructioncomponents in the cavity ofthe suspended ceiling.Su
spen
sion
sys
tem
Dist
ance
of m
ain
carr
ier
cent
res
mm
Dist
ance
of h
ange
rs
mm
Dist
ance
of c
ross
car
rier
mm
Thic
knes
s of
pla
ster
boar
d
mm
Min
eral
woo
l in
ceili
ng c
avity
mm
Min
.sus
pens
ion
dept
h lo
wer
leve
l of s
truct
ural
cei
ling
uppe
r lev
el o
f pla
ster
boar
ds
Certi
ficat
ion
Met
al m
onol
evel
susp
ensi
on
650
≥ 0
DIN 4102Part 4,Section6.5.7,
Tab. 102,test
certificate,report
Timber structural ceiling with concealed joists
Dist
ance
of m
ain
carr
ier
cent
res
mm
Dist
ance
of h
ange
rs
Dist
ance
of c
ross
car
rier
Thic
knes
s of
pla
ster
boar
d
Susp
ensio
n dep
th bo
tton f
ace
struc
tura
l ceil
ing to
top f
ace p
anels
Min
eral
fibr
ein
sula
tion
in v
oids
betw
een
ribs
or jo
ists
Certi
ficat
ion
DIN 4102Part 4,
Section 5,Tab. 56and 57,report,
testcertificate
500 2�12.5
1250
perm
itted
F 30 A
F 60 A
F 90 A
1 Bottom panels 2 Top panels
Woo
d ba
sed
pane
lsR
≥60
0 kg
/m3
Tong
ued
boar
ds
Thick.mm
Thick.mm
Thick.mm
Thick.mm
Thick.mm
Thick.mm
Gyps
um p
last
erbo
ard
Min
eral
fibr
e in
sula
tion,
min
.B2
to D
IN 1
8165
bulk
den
sity
≥30
kg/
m3
Gyps
um m
orta
ror
asp
halt
Woo
d ba
sed
pane
ls,
timbe
r boa
rd o
r par
quet
3 Floor construction forfire load from above
from below from aboveFire resistance classes
kg/m3 mm
≥ 30 ≥ 6013 –
F 30 B
F 60 B
F 30 B
F 60 B
2�9.5 – – –
In connection with our quality managementsystem (ISO 9001 certified) governing thedevelopment and manufacture of ourproducts, we offer a full guarantee, providedthat only RICHTER SYSTEM components areused.
per-mitted
650 500 15
400 400 18 +15
400 400 25 +18
40
flame spread from below flame spread from above
In case of flame spread withinthe cavity of the suspendedceiling, all construction com-ponents above the suspendedceiling have to have min. thesame classification as thesuspended ceiling.
F 30 A
F 30 A
9.5 – – 16
– 15 – 16
3�9.5 – – –9.5 – 20 –9.5 – – 25– 15 20 –
– 2116 –– 21
permitted
≥ 30 ≥ 6013 –– 2119 –– 27
permitted
≥ 0
mm mm mm mm
1250650 500 15650 400
12.5750 500
650500
400
2�12.5