platform: dball2 firmware: tl11 · 8/22/2017 · some toyota 2010+ model haves different...
TRANSCRIPT
Installation Guide
Update Alert: Firmware updates are posted the web on a regular basis. We recommendon
that you check for firmware and/or install guide updates prior to installing this product.
Index
The 1 firmware for 2 is an all-in-one door lock and override module compatible withTL DBALL1specific vehiclesToyota, Lexus, Scion and Pontiac .
This module can only be flashed and configured using Xpress at www.directechs.com orVIPusing the Directechs Mobile application for smartphones. Refer to the Module Programmingsection son page 18-19 for more information.
Vehicle Application Guide ....... .................. .................................... ............................... .......................................................
Installation s s(Wiring Diagram & Vehicle Wiring Reference Chart )Type ................................................................................... ........1 ......................................................................................Type ...................................................... . ...2 .......... .............................................................................................................Type ...................................................... . ...3 .......... .............................................................................................................
ProgrammingM .........................................................................................................................................................odule ProgrammingModule Reset.. ................................................................................................................. ................. ............................... ..H .... ............................... ..ard Reset.. ................................................................................................................. .................Feature & Option List... ..................................................................................................................... ..................................Feature Programming.........................................................................................................................................................
LED Diagnostics Troubleshooting.. ......................................................................................................................... ..& .. ...Limited One-Year Consumer Warranty .............................. ............................................................................. ....................
Quick Reference Guide............................................................................................... .................................................. .....
02
030608
1820202122
2325
26
® , Lexus, Scion and Pontiac their respective companiesToyota are registered trademarks and property of .
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Vehicle Application GuidePage 2
The following table lists the vehicles and features which are compatible with this product. The number assigned to eachyear allows you to determine which installation type should be used for your vehicle.
Standard Key G-stamped keys H-stamped keysFor vehicles with G-stamped key, see 4,TL
5 or 7 firmware. 11 works only withTL TL TLstandard key.
For vehicles with H-stamped key,see 10 firmwareTL . 11 works only withTLstandard key.
Key TypeSome Toyota 2010+ model havesdifferent encryption types. Please lookat your key blade and identify themarkings. A dot “.” means the vehicle iscompatible with 11 firmware. “G” orTL“H” indicates the vehicle is notcompatible with this firmware.
H
Vehicles
2011
2010
2009
2008
2007
2006
2005
2004
2003
PK
-Im
mobilizer
Bypass-D
ata
No
Key
Req'd
DL-A
rmF
acto
ryS
ecurity
DL-D
isarm
Facto
ryS
ecurity
DL-D
oor
Lock
Contr
ol
DL-D
oor
Unlo
ck
DL-D
river
Priority
Unlo
ck
DL-H
atc
hG
lass
Rele
ase
DL-T
runk
/H
atc
hR
ele
ase
RS
-Tach
/R
PM
Outp
ut
SS
-Entr
yM
onito
ring
ALL
Door
Pin
s
SS
-Entr
yM
onito
ring
Driver
Door
Pin
SS
-Entr
yM
onito
ring
Hood
Pin
SS
-Entr
yM
onito
ring
Tru
nk/H
atc
hP
in
SS
-Facto
ryA
larm
Trigger
Monito
ring
ST
-Bra
ke
Sta
tus
(footbra
ke)
ST
-E-B
rake
Sta
tus
ST
-Igniti
on
Sta
tus
Lexus
ES 330 3 3 3 •
GX 470 3 3 3 3 3 3 3 •
LS 430 3 3 3 •
LX 470 3 3 3 3 3 •
RX 330 3 3 3 •
RX 350 3 3 3 •
RX 400h 3 3 3 •
Pontiac 11 10 09 08 07 06 05 04 03
Vibe 1 1 • • • • • • • • • • • D • • •
Vibe 3 •
Scion 11 10 09 08 07 06 05 04 03
tC 3 3 3 3 3 3 •
xB 1 1 1 • • • • • • • • • • • D • • •
xD 2 2 2 • • • • • • • • • • • D • • •
Toyota 11 10 09 08 07 06 05 04 03
4Runner 3 3 3 3 3 3 3 3 •
Avalon 3 3 3 3 3 3 •
Camry 1 1 1 1 1 • • • • • • • • • • • • D • • •
Camry 3 3 3 3 •
Corolla 1 1 • • • • • • • • • • • • D • • •
Corolla 3 3 3 3 •
FJ Cruiser 3 3 3 •
Highlander 1 1 1 • • • • • • • • • • • • D • • •
Highlander 3 3 3 3 •
Highlander Hybrid 3 3 •
Land Cruiser 3 3 3 3 3 •
Matrix 1 1 • • • • • • • • • • • D • • •
Matrix 3 3 3 3 •
RAV4 1 1 1 1 1 • • • • • • • • • • • D • • •
RAV4 3 3 •
Sequoia 3 3 3 •
Sienna 3 3 3 3 3 3 3 •
Solara 3 3 3 3 3 3 •
Tacoma 3 3 3 3 3 3 •
Tundra 3 3 3 3 •
Venza 3 •
Yaris 3 3 3 3 3 3 •
Yaris Sedan 3 3 3 3 3 •
Legend:
D: Data-to-Data (D2D) only PK: Transponder & Immobilizer Override
•: D2D and Wire-to-Wire (W2W) DL: OE Door Lock & Alarm Controls
RS: Remote Start & Engine Controls
SS: Integrated Security & Monitoring
ST: Function/Feature Status
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
(+) Ignition (some vehicles require 2 ignitions)Output
Headlight Switchat headlights(white conn. )
OBDII DiagnosticonnectorC
1 8
169
[1] ( ) Tach InputAC
(-) Trunk Status Input
(-) Door Status Input
(-) E-Brake Status Input
Rem
ote
Sta
rter
(-) (Status)GWR
(-) OutputLock
(-) OutputUnlock
(-) Trunk Output(+) 12V
(-) Hood Status Input
(-) Ground
(+) Brake Input
1: (-) Lock InputGreen:
2: (-) Unlock InputBlue:
3: (-) Trunk InputRed/White:
9: (+) Ignition InputPink:
10: (-) (Status) InputBlue/White: GWR
HS CAN : 3High Tan/Black:
HS CAN : 4Low Tan:
[2] Autolight 10Interrupt (conn.side): Orange/Red:
[2] Autolight 11Interrupt (veh.side) : Yellow/Red:
[1] ( ) Tach OutputAC : 5Violet/White:
(+) Brake Output: 6Gray:
(-) E-Brake Status Output: 1Black/White:
(-) Door Status Output: 3Green/White:
(-) Trunk Status Output: 4Red/Black:
TX: 10Yellow/Black:
RX: 11Orange/Black:
(-) Hood Status Output: 12Blue/Red:
HS C High in 6AN : P
HS C Low in 14AN : P
TX: Pin 5
RX: Pin 4
12347 6 5
Transponder Key Amplifiern. around ignition(black con )
(+) 12 InputV : 13Red:(+) 12V
(-) Ground: 14Black:
(+) Start (some vehicles require 2 starts)er 2 Output
[2] Autolight:in 19P
(-) Parking Lights:in 18P
Not required in D2D mode.
12345678910
1112131415161720 19 18
(-) Parking Lights Output
(+) (someAccessory Outputaccessorvehicles require 2 ies)
8 7 6 54 3 2 1
Fuse Box(white conn.)
(+)12V: , pin 1White
OR
Refer to the Vehicle WiringReference Chart on next page
.for wire and connector details
Ignition Switch
Page 3
Installation Type 1
[1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
[ ]2 Conne ionct required only if vehicle is equipped with Autolights.
With the exception of the Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).OBDII
(-) Ground2DBALL
RF
Prog. Button
LED
4
TX
RX
(+)12V
14
12
2
10
P#: 2D65XKD
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Page 4
Type 1 - Vehicle Wiring Reference Chart
Function Color Pin Polarity Location Color Pins
RX Lt. Blue 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Tan 5 Data Transponder Key Amplifier on ignition switch. Black 7
Starter 1 Black 8 (+) Ignition switch. White 8
Starter 2 (2.4L only) White 1 (+) Ignition switch. White 8
Ignition 1 Brown 6 (+) Ignition switch. White 8
Ignition 2 Green 4 (+) Ignition switch. White 8
HS CAN High Lt. Green 6 Data OBDII. White 16
HS CAN Low White 14 Data OBDII. White 16
Parking Lights Brown 18 (-) Headlight switch. White 20
12V White 1 (+) Dash fuse box. White 1
RX Pink 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Green 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V White 7 (+) Ignition switch. White 8
Starter 1 White 8 (+) Ignition switch. White 8
Starter 2 White 1 (+) Ignition switch. White 8
Ignition 1 Gray 6 (+) Ignition switch. White 8
Ignition 2 White 4 (+) Ignition switch. White 8
HS CAN High Lt. Green 6 Data OBDII. Black 16
HS CAN Low White 14 Data OBDII. Black 16
Parking Lights White 18 (-) Headlight switch. White 20
RX Brown 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Red 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V Black 5 (+) Ignition switch. White 8
Starter 1 Blue 7 (+) Ignition switch. White 8
Starter 2 Gray 3 (+) Ignition switch. White 8
Ignition 1 Yellow 6 (+) Ignition switch. White 8
Ignition 2 Pink 1 (+) Ignition switch. White 8
HS CAN High Black 6 Data OBDII. Black 16
HS CAN Low White 14 Data OBDII. Black 16
Autolights Green 19 Cut Headlight switch. White 20
Parking Lights Black 18 (-) Headlight switch. White 20
RX Lt. Blue or Pink 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Tan or Green 5 Data Transponder Key Amplifier on ignition switch. Black 7
Starter 1 Black or White 1 (+) Ignition switch. White 8
Starter 2 White 8 (+) Ignition switch. White 8
Ignition 1 Brown or Gray 6 (+) Ignition switch. White 8
Ignition 2 Green or White 4 (+) Ignition switch. White 8
HS CAN High Lt. Green 6 Data OBDII. Black 16
HS CAN Low White 14 Data OBDII. Black 16
Parking Lights Brown or White 18 (-) Headlight switch. White 20
12V White 1 (+) Dash fuse box. White 1
Toyota Corolla 2009-2010
Wire Information Connector Information
Pontiac Vibe 2009-2010
Scion xB 2008-2010
Toyota Camry 2007-2011
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Page 5
Type 1 - Vehicle Wiring Reference Chart
Function Color Pin Polarity Location Color Pins
RX Red 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Lt. Blue 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V White/Black 5 (+) Ignition switch. White 8
Starter 1 Yellow 7 (+) Ignition switch. White 8
Starter 2 Red 3 (+) Ignition switch. White 8
Ignition 1 Black 6 (+) Ignition switch. White 8
Ignition 2 Lt. Blue 1 (+) Ignition switch. White 8
HS CAN High Blue 6 Data OBDII. Black 16
HS CAN Low White 14 Data OBDII. Black 16
Autolights Green 19 Cut Headlight switch. White 20
Parking Lights Lt. Blue 18 (-) Headlight switch. White 20
RX Lt. Blue 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Tan 5 Data Transponder Key Amplifier on ignition switch. Black 7
Starter 1 Black 8 (+) Ignition switch. White 8
Starter 2 (2.4L only) White 1 (+) Ignition switch. White 8
Ignition 1 Brown 6 (+) Ignition switch. White 8
Ignition 2 Green 4 (+) Ignition switch. White 8
HS CAN High Lt. Green 6 Data OBDII. Black 16
HS CAN Low White 14 Data OBDII. Black 16
Parking Lights Brown 18 (-) Headlight switch. White 20
12V White 1 (+) Dash fuse box. White 1
RX Pink 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Green 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V Blue 7 (+) Ignition switch. White 8
Starter 1 Yellow 8 (+) Ignition switch. White 8
Starter 2 White 1 (+) Ignition switch. White 8
Ignition 1 White 6 (+) Ignition switch. White 8
Ignition 2 Pink 4 (+) Ignition switch. White 8
HS CAN High Black 6 Data OBDII. Black 16
HS CAN Low White 14 Data OBDII. Black 16
Autolights Green 19 Cut Headlight switch. White 20
Parking Lights White 18 (-) Headlight switch. White 20
Wire Information Connector Information
Toyota Highlander 2008-2010
Toyota Matrix 2009-2010
Toyota RAV4 2006-2010
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
(+) Ignition (some vehicles require 2 ignitions)Output
OBDII DiagnosticonnectorC
1 8
169
[1] ( ) Tach InputAC
(-) Trunk Status Input
(-) Door Status Input
(-) E-Brake Status Input
Rem
ote
Sta
rter
(-) (Status)GWR
(-) OutputLock
(-) OutputUnlock
(-) Trunk Output(+) 12V
(-) Hood Status Input
(-) Ground
(+) Brake Input
1: (-) Lock InputGreen:
2: (-) Unlock InputBlue:
3: (-) Trunk InputRed/White:
9: (+) Ignition InputPink:
10: (-) (Status) InputBlue/White: GWR
HS CAN : 3High Tan/Black:
HS CAN : 4Low Tan:
[1] ( ) Tach OutputAC : 5Violet/White:
(+) Brake Output: 6Gray:
(-) E-Brake Status Output: 1Black/White:
(-) Door Status Output: 3Green/White:
(-) Trunk Status Output: 4Red/Black:
TX: 10Yellow/Black:
RX: 11Orange/Black:
(-) Hood Status Output: 12Blue/Red:
HS C HighAN :, pin 6Violet
HS C LowAN :, pin 14White
TX: , pin 5Violet
RX: , pin 4Green
12347 6 5
Transponder Key Amplifiern. around ignition(black con )
(+) 12 InputV : 13Red:(+) 12V
(-) Ground: 14Black:
(+) Start (some vehicles require 2 starts)er 2 Output
Not required in D2D mode.
(-) Parking Lights Output
(+) (someAccessory Outputaccessorvehicles require 2 ies)
Fuse Box(white conn.)
(+)12V: , pin 1White
OR
8 7 6 54 3 2 1
Refer to the Vehicle WiringReference Chart on next page
.for wire and connector details
Ignition Switch
Parking Lights:, pin 1White 3
1
13
2 14 3
56789101112
Headlight Switchat headlights(white conn. )
Installation Type 2
[1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
With the exception of the Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).OBDII
(-) Ground2DBALL
RF
Prog. Button
LED
4
TX
RX
(+)12V
14
12
2
10
P#: 2D65XKD
Page 6
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Page 7
Type - Vehicle Wiring Reference Chart2
Function Color Pin Polarity Location Color Pins
CAN High Violet 6 Data OBDII diagnostic connector. Black 16
CAN Low White 14 Data OBDII diagnostic connector. Black 16
Parking Lights White 13 (-) Headlight switch. White 13
RX Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Violet 5 Data Transponder Key Amplifier on ignition switch. Black 7
Starter Black 7 (+) Ignition switch. White 8
12V Gray 5 (+) Ignition switch. White 8
Accessory White 2 (+) Ignition switch. White 8
Ignition Pink 6 (+) Ignition switch. White 8
Wire Information Connector Information
Scion xD 2008-2010
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
(+) 12V
Connect to vehicleRefer to “Vehicle Wiring
Reference chart” onfor more information.next page
9: (+) Ignition InputPink:
10: (-) (Status) InputBlue/White: GWR
(-) Keysense Output 8: Yellow:
(-) Ground 7: Brown:
TX: 10Yellow/Black:
RX: 11Orange/Black:
TX: Pin 5 RX: Pin 4
12347 6 5
(+) 12 InputV : 13Red:(+) 12V
(-) Ground: 14Black:
Not required in D2D mode.
[1] Autolight 10Interrupt (conn. side): Orange/Red:
[1] Autolight 11Interrupt (veh. side): Yellow/Red:
(+) Ignition (some vehicles require 2 ignitions)
(+) Starter Output1
Rem
ote
Sta
rter
(-) (Status)GWR
(-) Ground
(+) Start (some vehicles require 2 starts)2[1] ( ) Tach InputAC
(+) Brake Input
(-) Lock Output
(-) Unlock Output
(-) Trunk Output
Refer to “Vehicle WiringReference chart” on
next pagefor wire and connector details.
Ignition Switch
(-) Parking Lights Output
(+) (some vehicles require 2 ies)Accessory accessor
OR
Transponder Key Amplifier. around ignition(black conn )
[1] Autolight
Installation Type 3Page 8
All are displayed from the wire side (unless specified otherwise).connectors
[ ]1 Conne ionct required only if vehicle is equipped with Autolights.
2DBALL
RF
Prog utton. B
LED
4
TX
(-) Ground
RX
(+)12V
14
12
2
10
P#: 2D65XKD
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart3Page 9
Function Color Pin Polarity Location Color Pins
Lexus ES 330 2004-2006
RX Green/White 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Blue/Yellow 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Blue 2 (-) Key warning switch. White 2
12V White Red 7 (+) Ignition switch. White 8
Starter 1 Black/White 8 (+) Ignition switch. White 8
Starter 2 Green/Yellow 1 (+) Ignition switch. White 8
Ignition 1 Black/Red 6 (+) Ignition switch. White 8
Ignition 2 Black/Yellow 4 (+) Ignition switch. White 8
Accessory Blue/Red 3 (+) Ignition switch. White 8
Autolights White 12 Cut Headlight switch. White 17
Parking Lights Red 14 (-) Headlight switch. White 17
Lock Blue/Yelllow 4 (-) DDM (Drivers Door Module) in drivers door. White 20
Unlock Blue 14 (-) DDM in drivers door. White 20
Brake Green/White 15 (+) Bottom of fuse box. White 20
Trunk Release Red or Blue/Yellow 5 (-) Body ECU on left rear of fuse box. White 18
Door Trigger Green/Red 16 (-) Body ECU on left rear of fuse box. White 20
Tach Black/Orange 5 AC ECM behind glove box. White 31
RX Yellow 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Yellow/Black 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V White/Red or White/Blue 7 (+) Ignition switch. White 8
Starter Green/Black 8 (+) Ignition switch. White 8
Ignition 1 Black/Red 6 (+) Ignition switch. White 8
Ignition 2 Blue/Yellow 4 (+) Ignition switch. White 8
Accessory White/Green 3 (+) Ignition switch. White 8
Tach Black/White 9 AC OBDII. White 16
Lock Blue 4 (-) Power window master switch. White 20
Unlock Green 14 (-) Power window master switch. White 20
Door Trigger White 8 (-) Body ECU on dash fuse box. White 20
Autolights Green/Orange 3 Cut Body ECU under drivers side dash. White 26
Parking Lights Green 8 (-) Body ECU under drivers side dash. White 26
Keysense Green/Yellow 14 (-) Body ECU under drivers side dash. White 26
Brake Green/Yellow 16 (+) Dash fuse box. White 16
RX Red/White 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Blue/Black 5 Data Transponder Key Amplifier on ignition switch. Black 7
Door Trigger Violet/White 6 (-) Ignition key cylinder light. Black 7
12V White/Blue 7 (+) Ignition switch. White 8
Starter Black/White 4 (+) Ignition switch. White 8
Ignition 1 Green/Yellow 6 (+) Ignition switch. White 8
Ignition 2 Red/White 2 (+) Ignition switch. White 8
Accessory White/Green 3 (+) Ignition switch. White 8
Keysense Lt. Green/Black 2 (-) Ignition switch. White 8
Lock Red/Black or Violet/Red 10 (-) DDM (Drivers Door Module) in drivers door. White 24
Unlock Black/Green or Violet/Green 9 (-) DDM in drivers door. White 24
Hazard Orange 2 (-) Rear of drivers fuse box. White 10
Trunk Release Violet 2 (-) Body ECU on dash fuse box. White 22
Brake Green/Orange 1 (+) Brake pedal switch. Green 4
Wire Information Connector Information
Lexus GX 470 2003-2009
Lexus LS 430 2004-2006
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart3Page 10
Function Color Pin Polarity Location Color Pins
RX Blue/Black 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Violet/Green 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Red/Black 2 (-) Key warning switch. White 2
Starter Black/White 8 (+) Ignition switch. White 8
Ignition 1 Black/Red 6 (+) Ignition switch. White 8
Ignition 2 Blue/Black 4 (+) Ignition switch. White 8
Accessory Black 3 (+) Ignition switch. White 8
Tach Black 9 AC OBDII. Black 16
Door Trigger Green/White 16 (-) Drivers fuse box, top left. White 25
Lock Blue/White 4 (-) DDM (Drivers Door Module) in drivers door. White 20
Unlock Green/Black 14 (-) DDM in drivers door. White 20
Parking Lights Green/Black 14 (-) Headlight switch. White 17
Brake Green/White 1 (+) Brake pedal switch. Blue 4
RX Lt.Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Brown 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V Red 7 (+) Ignition switch. White 8
Starter 1 Blue 8 (+) Ignition switch. White 8
Starter 2 White 1 (+) Ignition switch. White 8
Ignition 1 Violet 6 (+) Ignition switch. White 8
Ignition 2 Green 4 (+) Ignition switch. White 8
Accessory Gray 3 (+) Ignition switch. White 8
Keysense Black 2 (-) Ignition switch. White 8
Tach Black 9 AC OBDII. Black 16
Autolights Brown 19 Cut Headlight switch. White 20
Parking Lights Orange 18 (-) Headlight switch. White 20
Lock Brown N/A (-) Drivers kick panel. N/A N/A
Unlock Violet N/A (-) Drivers kick panel. N/A N/A
Door Trigger Lt. Blue 5 (-) Right side of dash fuse box. White 11
Brake Gray 2 (+) Brake pedal switch. Black 4
Power Liftgate Violet 2 (-) Power liftgate switch. White 2
RX Lt. Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Brown 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Black 2 (-) Key warning switch. White 4
12V Red 7 (+) Ignition switch. White 8
Starter 1 Blue 8 (+) Ignition switch. White 8
Starter 2 White 1 (+) Ignition switch. White 8
Ignition 1 Violet 6 (+) Ignition switch. White 8
Ignition 2 Green 4 (+) Ignition switch. White 8
Accessory Red 3 (+) Ignition switch. White 8
Autolights Brown 19 Cut Headlight switch. White 20
Parking Lights Orange 18 (-) Headlight switch. White 20
Lock Brown 4 (-) Power window master switch. White 20
Unlock Gray 14 (-) Power window master switch. White 20
Brake Blue or Brown 3 (+) Fuse box middle connector. White 12
Door Trigger Lt. Green or Lt. Blue 5 (-) Right side of dash fuse box. White 12
Power Liftgate Violet 2 (-) Power liftgate switch. White 2
Tach White 9 AC ECM behind glove box. Black 16
Lexus RX 330 2004-2006
Lexus RX 350 2006-2008
Wire Information Connector Information
Lexus LX 470 2004-2006
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart (cont’d)3Page 11
Function Color Pin Polarity Location Color Pins
RX Lt. Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Brown 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Black 2 (-) Key warning switch. White 4
12V Red 7 (+) Ignition switch. White 8
Starter Blue 8 (+) Ignition switch. White 8
Ignition 1 Violet 6 (+) Ignition switch. White 8
Ignition 2 Green 4 (+) Ignition switch. White 8
Accessory Brown or Gray 3 (+) Ignition switch. White 8
Tach Black 9 AC OBDII. Black 16
Autolights Brown 19 Cut Headlight switch. White 20
Parking Lights Orange 18 (-) Headlight switch. White 20
Lock Brown 4 (-) Power window master switch. White 20
Unlock Gray 14 (-) Power window master switch. White 20
Brake Blue 3 (+) Bottom of fuse box. White 12
Door Trigger Lt. Blue 5 (-) Right side of dash fuse box. White 12
Power Liftgate Violet 3 (-) Power liftgate switch. Black 4
RX Blue 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Green 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Blue/Black 2 (-) Key warning switch. Black 2
12V White 1 (+) Ignition switch. White 6
Starter Red 4 (+) Ignition switch. White 6
Ignition 1 Black/White 6 (+) Ignition switch. White 6
Ignition 2 Black/Yellow 2 (+) Ignition switch. White 6
Accessory Blue/Red 3 (+) Ignition switch. White 6
Lock Green 6 (-) Drivers kick panel. White 10
Unlock Blue/Yellow 7 (-) Drivers kick panel. White 10
Tach Black 5 AC Body ECU behind glove box. White 31
Brake Green/White 1 (+) Brake pedal switch. White 4
Trunk Release Blue/White 2 (-) Trunk release switch. White 5
Door Trigger Red/Yellow N/A (-) Drivers "A" pillar. N/A N/A
RX Yellow 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Red 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V Red 7 (+) Ignition switch. White 8
Starter 1 Black 8 (+) Ignition switch. White 8
Starter 2 Green 1 (+) Ignition switch. White 8
Ignition 1 Blue 6 (+) Ignition switch. White 8
Ignition 2 Yellow 4 (+) Ignition switch. White 8
Accessory Gray 3 3 Ignition switch. White 8
Tach Black 9 AC OBDII. White 16
Parking Lights Brown 14 (-) Headlight switch. White 17
Lock Green or Blue 15 (-) Drivers kick panel. White 20
Unlock Violet or Pink 14 (-) Drivers kick panel. White 20
Brake Blue 9 (+) Drivers kick panel. White 30
Trunk Release Orange 12 (-) Drivers kick panel. Gray 12
Door Trigger Blue 2 (-) Dash fuse box. White 6
Keysense Black 26 (-) Dash fuse box. White 32
Wire Information Connector Information
Scion tC 2005-2010
Pontiac Vibe 2008
Lexus RX 400h 2006-2008
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart (cont’d)3Page 21
Function Color Pin Polarity Location Color Pins
RX Pink/Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Lt. Green/Red 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Green/Yellow 2 (-) Key warning switch. Blue 4
12V White/Blue 2 (+) Ignition switch. White 8
Starter Green/Black 8 (+) Ignition switch. White 8
Ignition 1 Black/Red 6 (+) Ignition switch. White 8
Ignition 2 Blue/Yellow 4 (+) Ignition switch. White 8
Accessory White/Green 3 (+) Ignition switch. White 8
Trunk Release Orange 12 (-) Drivers kick panel. Gray 12
Lock Blue 6 (-) Drivers kick panel. White 18
Unlock Green 8 (-) Drivers kick panel. White 18
Brake Green/Yellow 16 (+) Front of Body ECU on dash fuse box. White 16
Door Trigger White 8 (-) Dash fuse box. White 20
Parking Lights Green 8 (-) Body ECU, middle connector. White 26
Autolights Green/Orange 3 Cut Body ECU, top connecter. White 26
Tach Black/White 19 AC Junction connector above gas pedal. Blue 22
RX Lt. Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Brown 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Black 2 (-) Key warning switch. White 4
Starter 1 Blue 8 (+) Ignition switch. White 8
Starter 2 Red 1 (+) Ignition switch. White 8
12V Black 7 (+) Ignition switch. White 8
Ignition 1 Yellow 6 (+) Ignition switch. White 8
Ignition 2 Green 4 (+) Ignition switch. White 8
Accessory Gray 3 (+) Ignition switch. White 8
Parking Lights Blue 18 (-) Headlight switch. White 20
Autolights Orange 19 Cut Headlight switch. White 20
Lock Black 9 (-) Drivers kick panel. White 20
Unlock Gray 19 (-) Drivers kick panel. White 20
Door Trigger Brown 5 (-) Dash fuse box. White 12
Tach Black 17 AC Left of steering column. White 18
Brake White to Blue 3 (+) Brake pedal switch. White 12
Trunk Release Blue 5 (-) Trunk release switch. White 6
RX Green/White 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Blue/Yellow 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Blue 2 (-) Key warning switch. Blue 2
Door Trigger Green/Red 1 or 6 (-) Ignition key cylinder light. Gray or Black 2 or 6
12V White/Red 7 (+) Ignition switch. White 8
Starter 1 Black/White 8 (+) Ignition switch. White 8
Starter 2 Black/Yellow 1 (+) Ignition switch. White 8
Ignition 1 Black/Red 6 (+) Ignition switch. White 8
Ignition 2 Black/Yellow 4 (+) Ignition switch. White 8
Accessory Blue/Red 3 (+) Ignition switch. White 8
Autolights White 12 Cut Headlight switch. White 17
Parking Lights Red 14 (-) Headlight switch. White 17
Trunk Release White/Blue 5 5-wire Drivers kick panel. White 12
Lock Blue/Yellow 7 (-) Drivers kick panel. White 20
Unlock Blue 2 (-) Drivers kick panel. White 20
Brake Green/White 15 (+) Dash fuse box. White 20
TachBlack/Orange (V6) orW hite (V 4 )
16 or 11 AC Right of steering column or behind cluster White 22 or 40
Wire Information Connector Information
Toyota Camry 2003-2006
Toyota Avalon 2005-2010
Toyota 4Runner 2003-2010
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart (cont’d)3Page 31
Function Color Pin Polarity Location Color Pins
RX Lt. Blue or Pink 4 Data Transponder Key Amplifier on ignition switch. Black 2
TX Tan or Green 5 Data Transponder Key Amplifier on ignition switch. Black 6
Keysense Blue/Black 2 (-) Key warning switch. White 7
12V White 1 (+) Ignition switch. White 7
Starter Red 4 (+) Ignition switch. White 6
Ignition 1 Black/White 6 (+) Ignition switch. White 6
Ignition 2 Black/Yellow 2 (+) Ignition switch. White 6
Accessory Blue/Red 3 (+) Ignition switch. White 6
Parking Lights Green/White or Green 13 (-) Headlight switch. White 6
Lock Green 6 (-) Drivers kick panel. White 10
Unlock Blue/Yellow 7 (-) Drivers kick panel. White 10
Brake Green/White N/A (+) Drivers kick panel, harness to rear. N/A 20
Door Trigger Red/Yellow 6 (-) Rear of drivers fuse box. Gray 31
Tach Black 5 AC ECM behind glove box. Black N/A
RX Pink/Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Lt. Green/Red 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V Blue/Black 7 (+) Ignition switch. White 8
Starter 1 Green/Black 8 (+) Ignition switch. White 8
Starter 2 Black/White 1 (+) Ignition switch. White 8
Ignition 1 Black/Red 6 (+) Ignition switch. White 8
Ignition 2 Blue/Yellow 4 (+) Ignition switch. White 8
Accessory White/Green 3 (+) Ignition switch. White 8
Tach Black/White 9 AC OBDII. White 16
Lock Blue 6 (-) Drivers kick panel. White 18
Unlock Pink 8 (-) Drivers kick panel. White 18
Brake Green/Yellow 16 (+) Bottom of dash fuse box. White 16
Door Trigger White 8 (-) Dash fuse box. White 20
Trunk Release Blue/Yellow 13 5-wire Back door ECU in tailgate. White 25
Keysense Green/Yellow 14 (-) Right side of dash fuse box. White 26
Parking Lights Green 8 (-) Right side of dash fuse box. White 26
RX Gray 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX White 5 Data Transponder Key Amplifier on ignition switch. Black 7
Door Trigger Green 1 or 6 (-) Ignition key cylinder light. Gray or Black 2 or 6
Keysense Green 2 (-) Key warning switch. White 4
12V Yellow 7 (+) Ignition switch. White 8
Starter 1 Black/White 8 (+) Ignition switch. White 8
Starter 2 Black 1 (+) Ignition switch. White 8
Ignition 1 Gray 6 (+) Ignition switch. White 8
Ignition 2 Green 4 (+) Ignition switch. White 8
Accessory Blue 3 (+) Ignition switch. White 8
Tach Black 9 AC OBDII. Black 16
Autolights Pink 12 Cut Headlight switch. White 17
Brake Green 6 (+) Drivers kick panel. White 14
Lock
Unlock
Toyota FJ Cruiser 2007-2009
Toyota Highlander 2004-2007
Wire Information Connector Information
See Tech Doc 1070 on www.directechs.com
See Tech Doc 1070 on www.directechs.com
Toyota Corolla 2005-2008
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart (cont’d)3Page 14
Function Color Pin Polarity Location Color Pins
RX Gray 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Lt. Blue 5 Data Transponder Key Amplifier on ignition switch. Black 7
Door Trigger Black 1 or 6 (-) Ignition key cylinder light. Gray or Black 2 or 6
Keysense Green 2 (-) Key warning switch. White 4
Parking Lights Lt. Blue 4 (-) Dash fuse box. White 7
12V Yellow 7 (+) Ignition switch. White 8
Starter Black 8 (+) Ignition switch. White 8
Ignition 1 Gray 6 (+) Ignition switch. White 8
Ignition 2 Green 4 (+) Ignition switch. White 8
Accessory Blue 3 (+) Ignition switch. White 8
Brake Green 6 (+) Drivers kick panel. White 14
Tach Black 9 AC OBDII. Black 16
Autolights Pink 12 Cut Headlight switch. White 17
Lock
Unlock
RX Blue/Black 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Violet/Green 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Red/Black 2 (-) Key warning switch. White 2
Door Trigger Green/White 6 (-) Ignition key cylinder light. Black 7
12V White/Red 7 (+) Ignition switch. White 8
Starter Black/White 8 (+) Ignition switch. White 8
Ignition 1 Black/Red 6 (+) Ignition switch. White 8
Ignition 2 Blue/Black 4 (+) Ignition switch. White 8
Accessory Black 3 (+) Ignition switch. White 8
Tach Black 9 AC OBDII. Black 16
Autolights Green/Orange 12 Cut Headlight switch. White 17
Parking Lights Green/Black 14 (-) Headlight switch. White 17
Lock Blue/White 4 (-) Drivers door ECU, in drivers door. White 20
Unlock Green/Black 14 (-) Drivers door ECU, in drivers door. White 20
Brake Green/White 1 (+) Brake pedal switch. Blue 4
RX Blue 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Green 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Blue/Black 2 (-) Key warning switch. Black 2
12V White 1 (+) Ignition switch. White 6
Starter Red 4 (+) Ignition switch. White 6
Ignition 1 Black/White 6 (+) Ignition switch. White 6
Ignition 2 Black/Yellow 2 (+) Ignition switch. White 6
Accessory Blue/Red 3 (+) Ignition switch. White 6
Parking Lights Green or Green/White 13 (-) Headlight switch. White 13
Lock Green 6 (-) Drivers kick panel. White 10
Unlock Blue/Yellow 7 (-) Drivers kick panel. White 10
Trunk Release Blue/White 2 (-) Trunk release switch. White 5
Tach Black 5 AC ECM behind glove box. White 31
Door Trigger Red/Yellow N/A (-) Drivers "A" pillar. N/A N/A
See Tech Doc 1070 on www.directechs.com
Toyota Highlander Hybrid 2006-2007
See Tech Doc 1070 on www.directechs.com
Connector InformationWire Information
Toyota Land Cruiser 2003-2007
Toyota Matrix 2005-2008
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart (cont’d)3Page 15
Function Color Pin Polarity Location Color Pins
RX Blue/Red 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Pink 5 Data Transponder Key Amplifier on ignition switch. Black 7
Door Trigger Red/White 1 or 6 (-) Ignition key cylinder light. White or Black 2 or 6
Keysense Blue/Red 2 (-) Key warning switch. White 4
12V White 1 (+) Ignition switch. White 6
Starter 1 Red 4 (+) Ignition switch. White 6
Ignition 1 Black 6 (+) Ignition switch. White 6
Ignition 2 Black/yellow 2 (+) Ignition switch. White 6
Accessory 1 Blue/Red 3 (+) Ignition switch. White 6
Tach Black 9 AC OBDII. Black 16
Parking Lights Green or Green/Red 10 (+) Headlight switch. White 13
Lock Blue/Orange 6 (-) Drivers kick panel. White 14
Unlock Blue/Yellow 13 (-) Drivers kick panel. White 14
Trunk Release Blue 21 5-wire Drivers fuse box. White 28
Brake Green/White 12 (+) Drivers fuse box. White 32
RX Lt. Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Blue 5 Data Transponder Key Amplifier on ignition switch. Black 7
Starter Green 7 (+) Ignition switch. White 8
Ignition 1 Black 6 (+) Ignition switch. White 8
Ignition 2 Lt. Green 1 (+) Ignition switch. White 8
Accessory Gray 2 (+) Ignition switch. White 8
Tach White 9 AC OBDII. White 16
Door Trigger Blue 10 (-) Interior light switch on dash. Black 10
Lock Lt. Blue 14 (-) Drivers kick panel. Blue 17
Unlock Pink 16 (-) Drivers kick panel. Blue 17
Keysense Lt. Green 5 (-) Body ECU on back of fuse box. White 10
12V Blue 4 (+) Dash fuse box. White 24
Autolights Pink or Green 21 Cut Body ECU on dash fuse box. White 26
Parking Lights Orange 23 (-) Body ECU on dash fuse box. White 26
Power Liftgate Red 26 (-) Body ECU on dash fuse box. White 26
Brake Tan 1 (+) Brake pedal switch. Blue 4
RX Yellow 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Yellow/Red 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Blue/Black 2 (-) Key warning switch. White 4
12V White/Red 5 (+) Ignition switch. White 6
Starter Black/Yellow 4 (+) Ignition switch. White 6
Ignition 1 Black 6 (+) Ignition switch. White 6
Ignition 2 Black/Yellow 2 (+) Ignition switch. White 6
Accessory Pink 3 (+) Ignition switch. White 6
Autolights Violet 12 Cut Headlight switch. White 17
Parking Lights Green/Black 14 (-) Headlight switch. White 17
Lock Lt. Green 5 (-) Drivers kick panel. White 18
Unlock Blue 7 (-) Drivers kick panel. White 18
Door Trigger Red/Green (front dome light) and R 10 & 3 (-) Junction connector, left of dash fuse box. Isolate the front and rear d White 14
Power Liftgate Yellow/Red 10 (-) Left of dash fuse box. White 22
Brake Green/Yellow or Green/White 21 (+) Dash fuse box. White 30
Tach Black/Orange 37 AC Behind insturment cluster White 40
Toyota Sequoia 2008-2010
Connector InformationWire Information
Toyota RAV4 2004-2005
Toyota Sienna 2004-2010
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart (cont’d)3Page 16
Function Color Pin Polarity Location Color Pins
RX Yellow or Green/White 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Yellow/Red or Blue/yellow 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Blue 2 (-) Key warning switch. White 4
12V White/Red 7 (+) Ignition switch. White 8
Starter 1 Black/White 7 (+) Ignition switch. White 8
Starter 2 Black/Yellow 1 (+) Ignition switch. White 8
Ignition 1 (coupe) Red/Black 6 (+) Ignition switch. White 8
Ignition 1 (convertible) Black/Red 6 (+) Ignition switch. White 8
Ignition 2 (coupe) Black/Yellow 4 (+) Ignition switch. White 8
Ignition 2 (convertible) Blue 4 (+) Ignition switch. White 8
Accessory Blue/Red 3 (+) Ignition switch. White 8
Tach Black/Ornage 9 AC OBDII. Black 16
Autolights White 12 Cut Headlight switch. White 17
Parking Lights Red 14 (-) Headlight switch. White 17
Trunk Release White/Blue 11 5-wire Drivers kick panel White 18
Lock Lt.Green (coupe) or Blue/Yellow 18 (-) Drivers kick panel. White 20
Unlock Blue 2 (-) Drivers kick panel. White 20
Door Trigger Green/Red 5 (-) Dash fuse box. White 12
Brake Green/White 13 (-) Dash fuse box. White 14
RX Pink/Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Lt. Green/Red 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Green/Black 1 (-) Key warning switch. White 2
12V White/Red 5 (+) Ignition switch. White 8
Starter 1 Green/Black 7 (+) Ignition switch. White 8
Starter 2 Black/White 3 (+) Ignition switch. White 8
Ignition 1 Black/red 6 (+) Ignition switch. White 8
Ignition 2 Bue/Yellow 1 (+) Ignition switch. White 8
Accessory White/Green 2 (+) Ignition switch. White 8
Tach Black/White 9 AC OBDII. White 16
Parking Light Green 18 (-) Headlight switch. White 20
Lock Violet 4 (-) Drivers kick panel. White 10
Unlock Green/Black 8 (-) Drivers kick panel. White 10
Brake Blue 13 (+) Dash fuse box. White 13
Door Trigger Blue 9 (-) Dash fuse box. Black 13
RX Lt. Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Blue 5 Data Transponder Key Amplifier on ignition switch. Black 7
Starter Green 7 (+) Ignition switch. White 8
Ignition 1 Black 6 (+) Ignition switch. White 8
Ignition 2 Lt. Green 1 (+) Ignition switch. White 8
Accessory Gray 2 (+) Ignition switch. White 8
Keysense Gray 1 (-) Key warning switch. White 2
Tach White 9 AC OBDII. White 16
Door Trigger Blue 10 (-) Interior light switch on dash. Black 10
Lock Lt. Blue 14 (-) Drivers kick panel. Blue 18
Unlock Pink 16 (-) Drivers kick panel. Blue 18
Autolights Green 21 Cut Body ECU on dash fuse box. White 26
12V Black 1 (+) Dash fuse box. White 1
Parking Light Oranger or Tan 23 (-) Body ECU on dash fuse box. White 26
Brake Tan 1 (+) Brake pedal switch. Blue 4
Toyota Solara 2004-2009
Connector InformationWire Information
Toyota Tacoma 2004-2010
Toyota Tundra 2007-2010
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Type - Vehicle Wiring Reference Chart (cont’d)3Page 17
Function Color Pin Polarity Location Color Pins
RX Lt. Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Brown 5 Data Transponder Key Amplifier on ignition switch. Black 7
Keysense Brown 1 (-) Key warning switch. White 2
12V Blue 7 (+) Ignition switch. White 8
Starter 1 Red 8 (+) Ignition switch. White 8
Starter 2 Green 1 (+) Ignition switch. White 8
Ignition 1 Green 6 (+) Ignition switch. White 8
Ignition 2 Red 4 (+) Ignition switch. White 8
Accessory Green 3 (+) Ignition switch. White 8
Tach Gray 6 AC OBDII. Black 16
Autolights Brown 19 Cut Headlight switch. White 20
Parking Light Red 18 (-) Headlight switch. White 20
Lock Brown 11 (-) Drivers kick panel. White 18
Unlock Gray 8 (-) Drivers kick panel. White 18
Door Trigger Pink 5 (-) Dash fuse box. White 12
Brake Lt. Green or Blue 3 (+) Dash fuse box. White 25
Power Liftgate Brown 4 (-) Power liftgate switch. Black 5
RX Green 4 Data Transponder Key Amplifier on ignition switch. Black 7
TX Violet 5 Data Transponder Key Amplifier on ignition switch. Black 7
12V Yellow 4 (+) Ignition switch. White 8
Starter Black 7 (+) Ignition switch. White 8
Ignition 1 Pink 6 (+) Ignition switch. White 8
Ignition 2 Green 1 (+) Ignition switch. White 8
Accessory White 2 (+) Ignition switch. White 8
Tach Lt. Green or Tan 9 AC OBDII. White 16
Parking Lights White 13 (-) Headlight switch. White 13
Lock Brown 7 (-) Drivers kick panel. White 20
Unlock Green 8 (-) Drivers kick panel. White 20
Keysense Yellow 7 (-) Dash fuse box. White 14
Door Trigger Pink 2 (-) Dash fuse box. White 6
Brake Green or Violet 12 (+) Dash fuse box. White 30
Toyota Yaris 2006-2011
Connector InformationWire Information
Toyota Venza 2009
Module ProgrammingPage 18
Important
Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check toensure everything is correct prior to moving onto the next step.
Warning! To take advantage of advanced features, you must use Xpress 4.5 (and higher) or the Directechs Mobile app.VIP
When the flashing operation is successful, you can proceed with the programming instructions below.
Refer to the Diagnostics section on page 23 for more information and for troubleshooting purposes.LED
OR
If required for your installation, connect the 10-pin, 12-pin and 14-pin harnesses tothe module, then connect the 4-pin D2D harness.
D2D Installation
W W Installation2
If required for your installation, connect the 10-pin and 12-pin harnesses to themodule, then connect the 14-pin harness to the module.
10-pinD2D
1st
12-pin14-pin
2nd
3rd
10-pinD2D
1st
4th
12-pin14-pin
2nd
3rd
Flashing a module using your computer:
1. Connect the interface module to your computer using theXKLoader2.
2. Go to www.directechs.com using Internet Explorer, andselect the button.Flash Module
3. Follow the instructions to select your vehicle, installationtype, and configure your options.
4. Once you have configured the firmware options, click on theFLASH button.
Flashing a module using your smartphone or tablet
1. Connect the interface module to your oader3.XKL
2. Launch the Directechs Mobile app on your smartphone ortablet.
3. Select and follow the on screenFLASH YOUR MODULEinstructions.
1Solid
Wait until the LED turns solid red.ON
Method for Installation Type 1 and 2:
2
3 Turn ignition to position. The turnsON LED solidONgreen for 3 seconds then turns .OFF
Go to the next page module programming.to see Type 3
Insert the key in the ignition switch. The flashes redLEDslowly for few seconds to indicate the key is in learningamode. The turns .LED ON solid green
4 Remove the key from the ignition.
Solid Green3 secs.
Off
&&Key IN O
FF
START
IGN
Flashes Redslowly
&SolidGreen
&Key IN O
FF
START
IGN
Key OUT OF
F
START
IGN
You have successfully completed the module programming sequence.
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Module Programming
Method for Installation Type 3
2Insert the key in the ignition switch. The flashesLEDred slowly for a few seconds to indicate the key is inlearning mode the green.then turns solidLED ON
4 Remove the key from the ignition.
You have successfully completed the module programming sequence.
Once the LED starts flashing Red 2x, press the programmingbutton 5 times turnsto skip the programming. TheCAN LEDOFF quickly, then turns ON for 3 seconds.
Solid Greenx3 secs.
Solid Greenx3 secs.
Off
& &Press 5x
3
Page 19
Flashes Redslowly
&SolidGreen
&Key IN O
FF
START
IGN
Key OUT OF
F
START
IGN
2
Solid
&
Solid Flashes
&
Release
3
Wait 3 seconds until the orange aitLED turns solid , and w 10 more secondsONuntil the andLED starts to flash orange red.
Release the programming button. The turns solid red.LED ON
Warning gainst xecuting a Hard Reset!A EA hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings (suchas and D2D options) may have to be reconfigured. See the section of this guide.RFTD Feature & Option List
1 OR
If required for your installation, c , &onnect the 10-pin 12-pin14-pin harnesses to the module Press hold the. andp , then connect the 4-pin D2D harness.rogramming button
D2D Installation
If required for your installation, connect the 10-pin & 12-pinharnesses to the module Press hold the rogramming. and pbutton, then connect the 14-pin harness to the module.
W2W Installation
10-pinD2D
1st
12-pin14-pin
2nd
4th
3rd
10-pinD2D
1st
5th
12-pin14-pin
2nd
3rd
4th
Module Reset
Hard Reset
2 & &Solid SolidRelease
Wait 3 seconds until the orange then release theLED turns solidONp The then turns solid red.rogramming button. LED ON
A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashedto the module using the web config tool will not be affected.
Page 20
1 OR
If required for your installation, c , &onnect the 10-pin 12-pin14-pin harnesses to the module Press hold the. andp , then connect the 4-pin D2D harness.rogramming button
D2D Installation
If required for your installation, connect the 10-pin & 12-pinharnesses to the module Press hold the rogramming. and pbutton, then connect the 14-pin harness to the module.
W2W Installation
10-pinD2D
1st
12-pin14-pin
2nd
4th
3rd
10-pinD2D
1st
5th
12-pin14-pin
2nd
3rd
4th
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Page 21
Feature & Option List
It is recommended to configure all features and options listed below thethe using configuration tool found on the moduleflashing page on www.directechs.com. The web offers more options; however, manual configuration of the features ispossible using the information on this page.
* Default option
Feature Operation Flashes / Option Description
1. Disabled* Module is connected to a remote starter using a standard installation.
2. RFTD OutputModule is connected to an XL202 using an RSR or RXT installation (when
available).
3. SmartStartModule is connected to SmartStart using an RSR or RXT installation (when
available).
1. Driver Priority*Unlocks only the driver door on first press and unlocks all doors on a second
press within 5 seconds.
2. All Unlocks all doors on first press.
1. Disabled
2. Trunk*
3.Tail Glass Opening
1. Disabled
2. Trunk
3. Tail Glass Opening*
1. Disabled
The OEM alarm will not be controlled by DBALL upon remote start. No disarm
or arm command will be executed at the beginning or end of the sequence; it
must be controlled by the Remote Starter.
2. Normal
Smart OEM Alarm Control will behave like a standard Safelock feature on a
remote starter. It will unlock at the beginning of the sequence, and relock after
start and shutdown.
3. Smart OEM Alarm Control*
Smart OEM Alarm Control will synchronize with the OEM alarm so that it will
disarm and rearm the vehicle in the remote start sequence, only when
required. The reason for this is, factory alarm control must often be done by
lock or unlock operation. This could create unnecessary actions on door lock
modules, such as the horn to honk. When possible, Smart OEM Alarm
Control will monitor the alarm and door lock status to detect if the disarm or
rearm is required. If the vehicle is unlocked or is not equipped with factory
alarm, the disarm/rearm will not be executed. Smart OEM Alarm Control will
also monitor the remote starter actions so that the factory alarm control is not
done twice. A remote starter, for which the Safelock feature is active, will work
perfectly with this option and will make it invisible to the user.
5 Smart OEM Alarm Control
Unlock Driver Priority2
1 RF Output Type
Trunk
Aux1
3
4
1. Disabled: doesn't operate any function in the vehicle.
3.Tail Glass Opening: When available, will operate the tail glass.
2. Trunk: Will pop the trunk if available.
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Page 22
To enter feature programming routine- Turn t , thenhe ignition .ON OFF- Within 5 seconds, press and the rogramming button turns after 3 seconds . Release theHOLD LED ONp until the orange ( )
Programming button.- The to indicate the feature number is 1. After a short delay, the flashes rapidly to indicateLED LEDwill flash green once slowly red
the current option of feature 1 . repeat(i.e. 1x green followed by 1x red indicates feature 1 is set to option 1) The flashing sequence willuntil .a new command is entered
Changing feature options- Press the arm or disarm button on aftermarket transmitter to change the option of the selected feature.lock/ unlock/- The flashes rapidly the number of times equal to the current option number. After a short delay, the flashes green slowlyLED LEDred
the number of times to indicate the current feature. repeat until .The flashing sequence will a new command is entered
Accessing another feature- Press and release the programming button a number of times to advance from the current feature to the next desired feature.- The flashes green slowly the number of times equal to the feature number. After a short delay, the flashes red rapidly toLED LED
indicate the current option of the current feature. repeat until .The flashing sequence will a new command is entered
When the maximum number of features or options is reached, the will start flashing again from the first feature or option.LED
Once a feature is programmed- Other features can be programmed.- The feature programming can be exited.
Exiting feature programming- No activity for 30 seconds; after 30 seconds, the will turn orange for 2 seconds to confirm the end of the programmingLED ON
sequence.OR
- Press and the programming button for 3 seconds. After 3 seconds, the will turn orange for 2 seconds to confirm theHOLD LED ONend of the programming sequence.
Feature Programming
ProgrammingButton
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Page 23
LED Description Troubleshooting
Module has no power.
Make sure the D2D harness is connected or that the 12
Volt is present between the red and black wires. If the
12 Volt is present, the module may be defective.
Waiting to begin the programming sequence.Ensure the correct programming procedure is being
followed.
Initialization failed.Reset the module and complete the programming again.
If the issue persists, please contact Technical Support.
Transponder functions were skipped.
(If compatible) when RXT mode is not desired or
convenience features are needed, please reset and
reprogram the module.
All required CAN networks has been detected. Normal operation.
1 of 2 CAN networks has been detected. Normal operation
Key2GO initiated.Please follow the steps indicated in “Module
programming” to complete the Key2GO programming.
Module was successfully programmed with all functions. Normal operation
Module was successfully programmed without
transponder functions.Normal operation.
CAN2 not detected.
Check the CAN2 Orange/Green and Orange/Brown wire
connections. Wake up the data bus by turning the
ignition on and try again. If your installation does not
require this connection, skip this step by pressing the
programming button 5 times.
J1850 not detected.Check the J1850 wire connection. Wake up the data bus
by turning the ignition on and try again.
CAN1 not detected.
Check the CAN1 Tan and Tan/Black wire connections.
Wake up the data bus by turning the ignition on and try
again. If your installation does not require this
connection, skip this step by pressing the programming
button 5 times.
Bypass data not detected.
Check the bypass line connection. If more than one wire
is used, make sure they are not inverted. Ensure the
vehicle still operates correctly using the factory key.
Bypass processing error.
The bypass calculation failed. Reset the module and try
again. If the condition persists, please contact Technical
Support.
ISO 1 not detected.
The Yellow/Black wire did not detect the expected
signal. Refer to "Installation (wiring diagrams & vehicle
wiring reference charts)" to check the connections.
ISO 2 not detected.
The Orange/Black wire did not detect the expected
signal. Refer to "Installation (wiring diagrams & vehicle
wiring reference charts)" to check the connections.
MUX not detected.
The Violet/Green or Violet/Brown wire did not detect the
expected voltage value. Refer to "Installation (wiring
diagrams & vehicle wiring reference charts)" to check
the connections.
Module Programming
Module Programming - Error Codes
Solid red
Flashes redx 1
Flashes redx 1
Flashes redx 2
Flashes redx 3
Flashes redx 4
Flashes redx 5
Flashes redx 6
Flashes redx 7
Solid greenx 3 secs
Flashesgreen
Solid orange
Flashes red& green
Off
Flashesorange
Flashesorangeslowly
Solid orangex 3 secs
LED Diagnostics & Troubleshooting
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Page 24
LED Description Troubleshooting
OBDII feature is not supported.The diagnostic data bus was not detected, therefore the
SmartStart features will be limited.
Ground When Running (Status) command received. The module has initialized the remote start sequence.
Ignition ON command received.The module has received the Ignition ON command and
is processing the remote start sequence.
Start ON command received.The module has received the Start ON command and is
processing the remote start sequence.
PTS shutdown error.The PTS output from the module was not activated due
to safety protection.
CAN bus incorrectly detected.
Verify the CAN1 and CAN2 connections. Refer to
“Installation (wiring diagrams & vehicle wiring reference
charts)” to check the connections.
LOCK command received.
UNLOCK command received.
TRUNK command received.
AUX1 command received.
AUX2 command received.
AUX3 command received.
Takeover successful. Normal operation.
Runsafe was not disabled.No UNLOCK command was received prior to opening the
door, or the 45 second timer expired in takeover mode.
Brake was not detected.The brakes were not detected, which prevents the
system from shutting down the vehicle.
Smart key was not detected.The smart key was not detected, which prevents the
system from shutting down the vehicle.
Speed was detected.The vehicle was detected as moving, which prevents the
system from shutting it down.
External module synchronization
Commands
Activation Ground When Running (Status)
If the bypass module fails to flash, it did not receive the
signal. Commands can come from RF or D2D.
Shutdown codes
(Flashes red,red thenorange) x 10
Flashes red& orange
Flashes redx 21
Flashes redx 2
Flashes redx 4
Flashes redx 10
Flashes redx 1
Flashes redx 3
Flashesgreen
Flashesgreenquickly
Flashesgreen x 1
Flashesorange x 1
Flashesorange x 2
Flashesorange x 3
Flashesorange x 5
Flashesorange x 4
Flashesorange x 6
Page 25
For a period of from the date of purchase of a Directed Electronics remote start or security product, DirectedONE YEARElectronics. (“ ”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, theDIRECTEDsecurity or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or materialunder normal use, provided the following conditions are met: the Part was purchased from an authorized dealer;DIRECTEDand the Part is returned to , postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing theDIRECTEDfollowing information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and completeproduct and Part description.
This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to itsintended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation orother causes not arising out of defect in materials or construction.
TO THE MAXIMUM EXTENT ALLOWED BY LAW EXCEPT AS STATED ABOVE ALL WARRANTIES INCLUDING, , ,BUT NOT LIMITED TO EXPRESS WARRANTY IMPLIED WARRANTY WARRANTY OF MERCHANTABILITY, , ,FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUALPROPERTY ARE EXPRESSLY EXCLUDED AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY, ;PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY OBLIGATION OR LIABILITY IN CONNECTION WITH ITS,PRODUCTS DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALLACTS OF.THIRD PARTIES INCLUDING DEALERS OR INSTALLERS DIRECTED IS NOT OFFERING GUARANTEE OR. AINSURANCE AGAINST VANDALISM DAMAGE OR THEFT OF THE AUTOMOBILE ITS PARTS OR CONTENTS, , , ,AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER INCLUDING WITHOUT LIMITATION, ,LIABILITY FOR THEFT DAMAGE OR VANDALISM IN THE EVENT OF CLAIM OR DISPUTE INVOLVING, , . A ADIRECTED OR ITS SUBSIDIARY THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF,CALIFORNIA CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE.DISPUTE THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED.TO THE AUTHORIZED DIRECTED DEALER PURCHASE PRICE OF THE PART DIRECTED SHALL NOT BE’S .RESPONSIBLE FOR ANY DAMAGES WHATSOEVER INCLUDING BUT NOT LIMITED TO ANY CONSEQUENTIAL, ,DAMAGES INCIDENTAL DAMAGES DAMAGES FOR THE LOSS OF TIME LOSS OF EARNINGS COMMERCIAL, , , ,LOSS LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE NOTWITHSTANDING THE ABOVE THE, . ,MANUFACTURER DOES OFFER LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED OPTION THEA ’SPARTAS DESCRIBED ABOVE.
This warranty only covers Parts sold within the United States ofAmerica and Canada. Parts sold outside of the United States ofAmerica or Canada are sold “ - ” and shall have , express or implied. Some states do not allow limitationsAS IS NO WARRANTYon how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warrantygives you specific legal rights and you may also have other rights that vary from State to State. does not and hasDIRECTEDnot authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.For further details relating to warranty information of Directed products, please visit the support section of ’sDIRECTEDwebsite at: www.directed.com
920-10012-01 2013-07
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the selectvehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. : Under noDISCLAIMERcircumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for anyconsequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, norwill they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / databus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of thisproduct be liable for consequential damages sustained in connection with this product and neither assumes nor authorizesany representative or other person to assume for it any obligation or liability other than the replacement of this product only.
Protected by U.S. Patents: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1;7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; Cdn. Patent:2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089; EuropeanPatent: 1,053,128; Pat. Pending: 2,291,306. Made in Canada.
Limited Consumer WarrantyOne Year
Rev.: 20 708221
Platform: DBALL2
Firmware: TL11
© 201 Directed.7 All rights reserved.
Quick Reference GuideDBALL2-TL11
© 2017 Directed. All rights reserved.
Button(s) Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote
start.
Press & hold for 5 seconds to activate
the trunk release (optional).
Press once, then to activate the
rear hatch/tail glass release (optional).*
Press 3 times, then to activate
the panic mode.
Press once, then to reset the
remote starter runtime.
List of Available Commands
x1 +
x3 +
x1 +
* This output is configurable. see your authorized installation center for more information.
Note that the information below is for Viper, Clifford and Python models. Icons and commands may differ depending on the remote brand and model purchased. Refer to your authorized installation center for more information.
Notes