PLC Testing with ET 91 Level Test Set To learn more click on note! Pilot Level Measurement on RF Test Point Measurements in Special Tracking Mode Pilot Level Measurement on Line Test Point Quick Frequency Response Test with MTTS Automatic Master Slave Tone Channel Test Automatic Master Slave Cable Test ELEKTR NIKA Pilot Level Measurement on RF Test Point ELEKTR NIKA Pilot Level Measurement on Line Test Point ELEKTR NIKA Automatic Tone Channel Test in Master Slave Mode Click here to see detailed results ELEKTR NIKA Test Result of Automatic Tone Channel Test All the test results are available also in numeric form and they can be transferred to PC via USB interface. ELEKTR NIKA Measurements In Special Transmitter Tracking Mode Changing the transmitter frequency (Tx) the receiver automatically follows the change according to the selected rule: Rx=CARRIER+Tx or CARRIER-Tx Quick Frequency Response Test of ET 91 in MTTS Mode MTTS METHOD The transmitter generates 36 test tones Frequency range: 100 to 3600 Hz, Frequency step: 100 Hz Level: -20 dBm / frequency The receiver measures the 36 test tones simultaneously ADVANTAGES No synchronisation is necessary between the two instruments The measuring time is shorter than that of other methods Test of the Connecting Cables with ET 91 in Master Slave Mode Click here to see detailed results ELEKTR NIKA Results of Automatic Connecting Cable Test All the test results are available also in numeric form and they can be transferred to PC via USB interface. ELEKTR NIKA THANK YOU FOR YOUR ATTENTION !