pliers general info page 89 distal end cutters page 89 ... · ideal to bend and manipulate loops,...

9
Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us Pliers General Info Page 89 Distal End Cutters Page 89 Straight Cutters Page 90 Bending Pliers Pages 91-92 Special Pliers Pages 93-94 Banding Pliers Page 95 Debonding Pliers Page 96 Utility Pliers Page 97 Lab Pliers Page 98 Banding Instruments Page 99 Bonding Instruments Page 100 Tying Instruments Page 101 Double-ended instruments Page 102 Instruments Service Page 103 Sterilization Page 104 87 88

Upload: others

Post on 05-Oct-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Pliers General Info Page 89 Distal End Cutters Page 89 Straight Cutters Page 90 Bending Pliers Pages 91-92 Special Pliers Pages 93-94 Banding Pliers Page 95 Debonding Pliers Page 96 Utility Pliers Page 97 Lab Pliers Page 98 Banding Instruments Page 99 Bonding Instruments Page 100 Tying Instruments Page 101 Double-ended instruments Page 102 Instruments Service Page 103 Sterilization Page 104

87 88

Page 2: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Brilliant™ Instruments Straight Cutters

Standard Safety Distal End Cutter

Safely cut and securely hold distal end of arch wires. 20 degree angled head for easier access to hard-reach area. Precise cut to prevent wire de-

formation. 0.5mm clearance. Max: .021x.028 SS, NiTi, TMA Item # 18-110

Standard Safety Distal End Cutter– Rounded Head

Same as 18-110 with rounded head Max: .021x.028 SS, NiTi, TMA Item # 18-112

Flush Cut Distal End Cutter Prevent patients inconvenience by cutting wires flush to the molar tubes Sharper head for smooth and clean cut Max: .021x.028 SS, NiTi, TMA Item # 18-113 With Safety hold, Item# 18-114

Standard Pin & Ligature Cutter

Special steel insert for maximum durability Designed to cut pins, ligatures, any wire size up to .015 Item # 18-130 Mini head# 18-131

Angled 15º Pin & Ligature Cutter

Same as the standard but with a 15º angled tip for easy access and bet-ter visibility Max: .015 ligature wire Item # 18-132 For Mini head, Item#18-133

Mini Pin & Ligature Cutter Mini size plier for easy access into difficult areas. Ultra-sharp edges for easy and clean cutting Max: .015 ligature wire Item # 18-134

Standard Hard Wire Cutter Specially designed to cut hard wires. Designed to cut pins, ligatures, any wire size up to .021 x .028 Item # 18-120

Angled 15º Hard Wire Cutter Same as the standard but with a 15º angled tip for easy access and bet-ter visibility Max: .021x.028 SS, NiTi, TMA Item # 18-121

Heavy Duty Cutter This super tough plier is ideal for face bow cutting. Cutting edges will not nick. Max: .060 SS Item # 18-122

For maximum performance of ligature cutters: Do not cut braided ligature wire Do not cut wires exceeding the maximum cutting capacity of the instrument Do not cut any archwire

Key features you can depend on!!Key features you can depend on!!Key features you can depend on!! Orbital Joint for maximum performance and durability. Superior performance over Box and Hex joint

Tool Steel Inserts with diamond honed edges

Brilliant™ instruments are made from the highest quality forged stainless steel Forged instruments are stronger than casted instrument

IOS’s Exclusive Warranty All instruments manufactured by IOS carry a one-year warranty on material, workmanship, and corrosion resistance. With normal maintenance and proper use, these high quality instruments will work for years

Standard Mini

89 90

Page 3: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Bending Pliers Bending Pliers

Bird Beak Plier Most popular plier to bend arch-wires during regular adjustments. Fine tip with .025” diameter Max: .021x.028 SS With Groove Item # 18-201 Without Groove Item# 18-202

Light Wire Plier Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA, SS With Groove Item # 18-206

Without Groove Item# 18-207

Heavy Duty Bird Beak Designed to bend heavy wires and adjust retainers. Tip is .030” wide Max: .036” SS Item # 18-205

Jarabak Plier Ideal to bend and manipulate loops, with serrated tips for secure wire holding. Item # 18-208

3in1® Plier This unique plier featured three dis-tinct surfaces: • Bird beak tip for bending wires

up to .020” with two grooves on the tip

• Hollow chop surface for contour-ing and reshaping arch wires

• Hard wire cutter Item # 18-209

Bird Beak Plier w/ Cutter Same as our regular bird beak plier with a cutter on the back Max: .021x.028 SS With Groove Item # 18-203 Without Groove Item# 18-204

Tweed Contouring Plier Ideal for bending square and rec-tangular wires. Blades are parallel when opened to .020” Max: .021x.028 SS 1.0 mm Thickness Item # 18-220 1.5 mm Thickness Item# 18-221

Mini Three Prong Plier Designed to bend NiTi wires perma-nently. Max .019 x .025 NiTi, .018 SS Item # 18-211

Three Prong Plier One piece design of the double tip for maximum strength. Great for bending V-bends intra-extraorally or for retainer adjustment Item# 18-210

Hollow Chop Plier Contouring plier to reshape arch-wires Max: .021x.028 SS Item# 18-258

Optical Plier Heavy duty plier to apply bends intraorally “ Gable bends, acti-vate closing loops, … etc” Max .019 x .025 NiTi, .018 SS Item # 18-231

Loop Forming Plier Traditional Tweed plier for consis-tent omega and bull loops fabrica-tion. Three step sections of .045”, .060” and .075” diameter. Serrated tip for even wire holding Max .019 x .025 SS, TMA Item# 18-230 Replacement tip # 18-923

91 92

Page 4: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Special Bending Pliers Special Pliers

Cinch Back Plier

Double-head plier designed to cinch back SS and NiTi wires in all quadrants Max .019x.025 NiTi, .016x.022 SS Item# 18-301

V-Stop Plier Designed to bend precise V stops extraorally without wire distortion. Max: .019x .025 SS or TMA

Item # 18-305

Detailing Plier Double-sided intraoral plier to apply quick step up or step down without removing the wire. Max: .021 x .028 SS or TMA 1 mm step Item # 18-303 1.5 mm step Item# 18-304

Nance Plier Ideal to bend and manipulate loops with serrated tips for secure wire holding Item # 18-306

Omega Loop Plier Traditional plier to bend omega stops in two quick steps. Item # 18-307

Lingual Plier Perfect for TPA fabrication and ac-tivation. Creates double back and triple back bends in .030 and .036 lingual arch wires Item # 18-302

Crimpable Hook Plier New design with long handle for secure placement of crimpable hooks and stops without wire dis-tortion “ Three prong effect” . Item # 18-320

Hawley Plier Designed to contour facial and lin-gual retainer wires. Two barrel tip for vertical loop fabrication. Also good to adjust lip bumpers and headgears Max: .045” SS or Elgiloy Item # 18-502

Loop Forming Plier All you need to fabricate retraction loops. 2mm, 3mm, 4mm and 5mm vertical loops. Works with round and rectangular wires Item#18-308

Torquing Plier “Male” Apply buccal or lingual torque to any individual tooth. Max: .021 x .028 SS or TMA Item # 18-330 Set “ Male & Female” Item # 18-333

Torquing Plier “Female” Apply buccal or lingual torque to any individual tooth. Item # 18-331

Head Gear Plier This plier was designed to adjust and fabricate vertical loops made of wire sizes up to .050” SS. Long handle with heavy head for supe-rior performance. Item # 18-350

93 94

Page 5: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Banding Pliers Debonding Pliers

Band Removing Plier When the padded tip is on the oc-clusal surface, the non-padded tip lies securely under the attachment or the band edge for easy band re-moval Item# 18-401

Band Contouring Plier Reshape crowns and bands for per-fect fit. Fine head for precise con-touring. Item # 18-405

Band Seating Plier This plier featured a thin head to grip the buccal attachment securely while seating the band. The beaks are very strong, and the unique serration

pattern makes it a real help in your practice

Item # 18-410

Band Removing Plier Short Shorter beak is preferred for large molar bands. May be used for appli-ances removal such as bonded RPE. Item# 18-402

Narrow Debonding Plier Narrow tips wedges between the bracket base and the tooth surface to lift the bracket with no stress. May be used mesio-distally or oc-cluso-gingivally Item# 18-430 Replacement tips, Item# 18-926

Angled Debonding Plier Designed to remove all attachments in the anterior and posterior region. Angled perfectly for easy access to difficult posterior and lingual areas Item # 18-432

Wide Debonding Plier Same great features as but with wider tips Item# 18-431 Replacement tips, Item# 18-927

Adhesive Removing Plier Sharp inserted beak fits under the adhesive remaining on the tooth for easy removal. Pads are suitable for high heat ster-ilization Item # 18-440

Converting Plier Designed to easily remove caps from convertible tubes. Long slim head to access hard-to-reach areas Item # 18-411 Replacement blade, Item# 18-925

95 96

Page 6: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Utility Pliers

Weingart Plier 20º angled tip for maximum conven-ient at working. Smaller tip for eas-ier access in hard-to-reach areas. Regular handle Item # 18-450 Long handle Item# 18-451

Howe Plier Serrated tip for secure wire holding Item # 18-460

Mini Howe Plier Serrated tip for secure wire hold-ing. Smaller tip makes this plier ideal for small accessories place-ment e.g. power pins, rotational springs, stops, … etc. Item # 18-461

Actual size Actual size

90º Utility Plier This plier has a 90º angled tip that facilitates TPA insertion and re-moval. Also, great for lingual braces. Item # 18-465

Regular Handle Long Handle “16 mm Longer”

Lab Pliers

Hawley Plier Contour facial and lingual retainer wires. Two barrel tip for vertical loop fabrication. Max: .045” SS or Elgiloy Item # 18-502

Heavy Duty Bird Beak Designed to bend heavy wires and adjust retainers. Tip is .030” wide Max: .036” SS Item # 18-501

Heavy Duty Cutter This super tough plier is ideal for face bow cutting. Cutting edges will not nick. Max: .060 SS Item # 18-122

Three Prong Plier One piece design of the double tip for maximum strength. Great for bending V-bends intra-extraorally or for retainer adjustment Item# 18-210

97 98

Multi-Function Lab Plier Bending head on the front, Con-touring in the middle and three prong on the back. Also, dsigned with a cutter in the joint area Max: .10 SS Item # 18-122

Can't find a plier you need? Contact us as we gladly can manufacture custom-made pliers

Page 7: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Banding Instruments Bonding Instruments

Ultra-Fine Tube Tweezer

Special offset for easier tube placement Fine tip to hold tubes securely Heat sterilizable up to 370º F / 188º C Item# regular 18-601 Item# reverse action 18-602

Narrow Bonding Tweezer

Slim tip for better bracket placement especially for posterior brackets and lingual attachments Heat sterilizable up to 370º F / 188º C Item# 18-603

Direct Bonding Tweezer

Reverse action tweezer hold bracket securely Heat sterilizable up to 370º F / 188º C Item# 18-604

Bone Gauge

Measure height of bracket placement from incisal edge 3.5mm, 4.0mm, 4.5mm and 5.0mm measurements Heat sterilizable up to 370º F / 188º C Item# 18-660

Cotton College Plier

High quality Stainless Steel Heat sterilizable up to 370º F / 188º C Item# 18-606

Bracket Gauge

Measure height of bracket placement from incisal edge 3.5mm, 4.0mm, 4.5mm and 5.0mm measurements Heat sterilizable up to 370º F / 188º C 0.018 slot Item# 18-668 0.022 slot Item # 18-662

Buccal Tube Tweezer

90º angled tip for easy placement of buccal attachemnt especially on 2nd molars Reverse action tweezer hold buccal tubes securely Heat sterilizable up to 370º F / 188º C Item# 18-605

Separating Plier

Angled head for easier module placement Special tip design to prevent module slippage Wider opening for maximum stretching Heat sterilizable up to 370º F / 188º C Item# 18-610

Band Pusher

Special handle design for increased control during band seating. Serrated tip for slippage prevention. Heat sterilizable up to 370º F / 188º C Item# 18-615

Bite Sticks

High quality plastic handle with metal serrated tip Heat sterilizable up to 370º F / 188º C Triangular head Item# 18-620 Round head Item# 18-621 Star head Item# 18-622

Special offset to prevent brackets interfering

Distal Tissue Retractor

Facilitates early 2nd molar banding by retracting the tissue covering the distal portion of the 2nd molar Heat sterilizable up to 370º F / 188º C

Item# 18-630

Mixing Spatula

Stainless steel construction Heat sterilizable up to 370º F / 188º C

Item# 18-640

99 100

Page 8: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Tying Instruments Double-Ended Instruments

Standard Mathieu Hemostat

• Designed for regular elastic and SS ligature placement. • High quality corrosion resistant stainless steel • Available in 5 shapes:

1.Narrow head; for elastic application and SS ligature up to .010” Item# 18-700

2.Fine head; delicate mathieu for elastic application only Item# 18-701

3.Grooved head; secure holding for elastics, Item# 18-702 4.Regular head; general use, Item# 18-703 5.Hooked head; not suitable for SS ligature, Item# 18-704

Heavy-Duty Mathieu Tungsten carbide inserted tip for maximum performance, may be used for small wire insertion Available in regular head only Item# 18-710

Lingual Mathieu Hemostat

Specially designed for easy ligature placement with lingual braces Tip will hold elastic module securely Item# 18-720

Popular scaler for bracket positioning, flash removal and light tooth cleaning #810

Popular scaler for bracket positioning, flash removal and light tooth cleaning #811

Band pusher with serrated head to pre-vent slipping #830

Flat serrated tip useful for ligature direct-ing, closing self ligation brackets, ...etc #831

Straight head ligature and wire director #841

Curved head ligature and wire director #840

Extra fine explorer tip #822

Flat serrated tip useful for ligature direct-ing, closing self ligation brackets, ...etc #850

Curved head ligature and wire director #820

Curved head ligature and wire director #821

Manufactured from high quality stainless steel Octagonal cross section preventing instrument from rolling over the place

Texture design for better ripping and control High quality corrosion resistant stainless steel; sterilizable up to 370 F / 188 C Available in 10 different ends, may be ordered as double or single-ended instrument For ordering: Single-ended; 18 + the end number e.g. Twirl-on —> 18-850 Double-ended; 18 + the Right end number + the left end number e.g. Band pusher + Scaler —> 18-830-810 For special orders, please allow 4-6 weeks for manufacturing

Cone Style Ligature Tying Plier

Designed for faster and tight ligature tying. Chamfered slot for secure ligature holding Item# 18-730

5 years warranty

1 2 3 4 5

101 102

Page 9: Pliers General Info Page 89 Distal End Cutters Page 89 ... · Ideal to bend and manipulate loops, Designed to fabricate precise bends and loops with longer nose Max: .020 SS, TMA,

Place your order toll free by calling 1-888-IOS-8882 Secure online ordering via www.theIOS.us

Sterilization

To maximize your instruments life, follow these steps:

1. Clean instruments in the ultrasonic for 7-10 minutes using proper solution. Ultra-sonic is NOT recommended for cutting pliers as it could dull or damage the cutting edge. For cutters, use high-volume sterile water. Never use any hard objects such as metal brush or pan scratcher to clean instrument as this would destroy the outer surface and increase the danger of oxidation

2. Rinse instruments with distilled or filtered water. Rinsing with regular tap water may contain high level of silicate, which leads to stains formation on instruments during sterilization.

3. Dry instruments with compressed air especially the joint area

4. Sterilize with:

• DRY HEAT Sterilize for 6-30 minutes at 160º C based on equipment instruction. Do NOT sterilize at tem-peratures exceeding 180º C as this may dull the cutting edges, impair the tip hardness, and/or cause discoloration. All hinged instruments should be placed open • AUTOCLAVE sterilize for 12 minutes at 134º C using sterile water. Do NOT mix rusty instruments with clean instruments as a rusty film could be formed on the clean instruments. • COLD (2% Glutaraldehyde) Immerse instruments in the prepared bath for recommended time. Never leave instruments in the bath overnight or over the weekend. After cold sterilization, pliers and instruments must be thoroughly cleaned and rinsed with distilled water to remove any chemical residues.

Lubrication; Lubrication is recommended for hinged instruments with paraffin-oil spray, Do NOT use WD40 or . With dry heat, only lubricate inside the joint as the outer area may get stained when contaminated with oil

Clean Store Rinse Dry

Instruments Service

Instruments Repair Service IOS is proud to offer a quality instrument repair service that is both economical and reliable. All re-pairs are guaranteed for 6 months. Available services: Plier Refurbishing; Rust and tarnish removal, Joint maintenance and special chemical treatment Sharpening Cutters Sharpening Bands & Brackets Removers Sharpening Scalers Retipping Cutters Retipping Other Pliers

Color Coding Rings • Manufactured especially to be used with orthodontics instruments. • Designed to fit pliers handle, double-ended instruments, band pushers, mathieus, and other instru-

ments • Made of a high temperature silicone that is heat resistant up to 370 F / 175 C • Available in 12 different colors ,

Color Item# Color Item# Color Item#

Blue 18-701 Green 18-705 Purple 18-709

Red 18-702 Black 18-706 Orange 18-710

Pink 18-703 White 18-707 Tan 18-711

Yellow 18-704 Brown 18-708 Gray 18-712

18-700 Kit “12 assorted colors with dispenser”

Sterilize

103 104