plug isolation & weld testing handout final
TRANSCRIPT
The need to add new flanges or replace existing flanges and butt-
welds to a pipe system is a part of capital expansion or general
maintenance. Traditional solutions such as full line pressure test or
using mud plugs are problematic and expensive. We have replaced
these messy and time consuming procedures with a simple and
convenient hydrostatic testing system.
Combined with our pipe cutting, sever and
beveling field services, we are able to provide
a complete turnkey pipe isolation and weld
testing service. We can manage the entire
project and get your equipment back in service
safely with minimal downtime.
Services• ¾”- 24” NPS (DN20 to DN600) Plug
Isolation & Hydrostatic Weld Testing
• Custom sizes available upon request
• Test pressures up to 2250 PSI (155.2 Bar)
• Pipe Cutting & Beveling
Benefits• Turnkey plug isolation and weld
testing solution
• Reduces down time and the need for NDE
• Controlled containment of harmful vapors
• Minimal water usage, reducing waste treatment and line dehydration expense
• Best-in-class equipment coupled with highly trained personnel
Isolate the Line
Using a double block and bleed plug we are able to monitor and isolate potential explosive vapors from hot work areas.
Test the Weld
Once welding is complete, a hydrostatic test using a minimum amount of liquid can be performed to verify the integrity of the welds.
Turnkey Plug Isolation & Weld Testing
Bolttech [email protected] free 866.265.8832bolttechmannings.com
Red Flame [email protected] free 888.846.8827redflameindustries.com
For more information, please contact:
Services
HeadquartersBolttech Mannings
501 Mosside Blvd
North Versailles, PA 15137, USA
toll free 866.265.8832
bolttechmannings.com
CanadaRed Flame Industries
6736 - 71 Street
Red Deer, AB T4P 3Y7, CAN
toll free 888.846.8827
redflameindustries.com
Technical Bolting Services• Torquing & Tensioning
• Induction Nut & Bolt Heating
• Hydraulic Turbine Closure
• Stud & Nut Removal
• Flange Tracking
• Tool Calibration
Field Machining Services• Flange Facing
• Pipe Cutting & Beveling
• Speed Drilling
• MDM - Metal Disintegration Machining
Heat Treating & Thermal Services• Pre and Post Weld Heat Treating
• Boiler Tube Removal Heating
• Combustion Furnace Heat Treating
• Induction Thermal Expansion
• Rotating Rotor
Specialty Services• Hot Tapping
• NDT
• Plug & Line Isolation
• Hydrostatic Weld Testing
Bolttech Mannings - a world-leader in
specialty industrial bolting and thermal
technologies, has joined forces with
Red Flame Industries (RFI) - Canada’s
trusted full-service plant and pipeline
specialists. Together we are a leading,
diversified industrial service supplier,
delivering quality products and first
rate services to the oil and gas refining,
chemical processing, power generation,
steel and mining industries.