PLUG & PLAY WIRELESS DMXIdeal for: smaller venues, clubs, events, churches, schools

SHoW DMX SHoW BABY 5

UNIQUELIGHTINGACCESSORIES W W W . C I T Y T H E A T R I C A L . C O M

�

FEATURES

5 Pin XLR DMX InConnector(3 Pin Version Available)Model 5702-3

5 Pin XLR DMX OutConnector(3 Pin Version Available)Model 5702-3

2 dBOmni-DirectionalAntenna

AC Adapter Input

Connector

TransmitterModeIndicator

Receiver ModeIndicator Data Present/

SHoW ID Indicator

RF SignalStrengthIndicators

WHATS IN THE BOX

FRONT BACK

Antenna

SHoW Baby 5 Unit

Mounting Bracket & Screws

AC Adapter Kit

Set ID ButtonAccess

UNIQUELIGHTINGACCESSORIES W W W . C I T Y T H E A T R I C A L . C O M

SHoW DMX SHoW BABY 5�

QUICK SET UP GUIDE

1

5 6

7 8 9

3If you will be hanging or mounting the SHoW Baby units, attach the mounting brackets to the bottom of the units using the screws provided and a Phillips driver.

Mount the units so that there is an unobstructed line of sight between them. The effective range is up to 300 feet indoors or up to 1500 feet outdoors, depending on conditions.

Attach the 2dBi Omni-directional antennas to the units. For best results in use, they should be positioned vertically.

Connect a cable from your controller or console to the DMX input connector of the Show Baby unit which will serve as the transmitter. The Tx LED on the front panel will light up.

Connect a DMX cable from the output connector on the receiving SHoW Baby unit(s) to the first device you wish to control. The Rx LED will light up. Connect additional devices (up to 32 devices may be chained together).

Connect the AC adapters to the units and plug in to mains power supply.

All units within the system must share the same Show ID. To set each unit, press the recessed SET ID button on the rear panel.

As the button is pressed, the color of the ID/DATA LED changes on the front panel. There are 5 color/ID number choices. Set each unit within the sytem to the same color.

The transmitter is now set to the same Show ID as the receiver.

4

2

As your controller or console sends DMX data to the transmitter, the "Data/ID" LED will illuminate. The transmitter now sends the DMX data wirelessly to the receiving unit(s) As DMX data is received by the receiver(s), the signal strength LED's will illuminate. If the signal is weak (two or less LED's), confirm that the transmitter and receiver are in an unobstructed line of sight and that the antennas are oriented vertically.

UNIQUELIGHTINGACCESSORIES W W W . C I T Y T H E A T R I C A L . C O M

SHoW DMX SHoW BABY 5�

TECHNICAL SPECIFICATIONS

Applications

Model

Catalog Number

Broadcast Power

SHoW DMX Neo Broadcast Modes

SHoW DMX Classic Broadcast Modes

DMX Burst Modes

Ethernet Protocols Supported

Hopping Patterns

Show IDs

Radio Transceiver

RF Sensitivity

RDM Features

Compliance Certifications

Power

Dimensions

Weight

Indoor Shows, Events, Environments, Clubs, Churches, Schools

SHoW Baby 5

5702 / 5702-3 (3 pin ver.)

1mW ETSI14mW ETSI28mW ETSI72mW ETSI

Show ID 201: Adaptive Neo Full BandwidthShow ID 102: Neo Full BandwidthShow ID 117: Neo Low BandwidthShow ID 133: Neo Mid BandwidthShow ID 149: Neo High Bandwidth

N/A

Full (512 Slots)

N/A

3

5

CTI 5792

-95dBm

RDM ProxyRDM Responder

FCC, IC, CE

12VDC100-240 VAC 50/60 Hz (200mA Adapter Provided)

3.625"W x 1.8"H x 3"D(92mm x 46mm x 76mm)

6.4 oz, (.18 g)

UNIQUELIGHTINGACCESSORIES W W W . C I T Y T H E A T R I C A L . C O M

(Settable only through RDM)

SHoW DMX SHoW BABY 5�

DMX MADE EASY

USE UP TO 32 DEVICES PER RECEIVER

4 3

9

4 3

9

4 3

9

4 3

9

4 3

9

WORK WITH UP TO SYSTEMS USINGTRANSMITTERS SET TO DIFFERENT SHOW IDS

USE UP TO 256 RECEIVERS PER TRANSMITTER

USE UP TO 512 DMX CHANNELS PER SYSTEM.

UNIQUELIGHTINGACCESSORIES W W W . C I T Y T H E A T R I C A L . C O M

5

201 117

102

SHoW DMX SHoW BABY 5�