plumbing systems
DESCRIPTION
Plumbing Systems. Plumbing systems include supply lines,drain lines, water heaters, valves, filters, and other equipment. between supply and drain lines there is an air lock, trap, device. plumbing pipes are made of: copper, pvc, cast iron, and occasionally brass. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/1.jpg)
Plumbing Systems
![Page 2: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/2.jpg)
![Page 3: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/3.jpg)
Plumbing systems include supply lines,drain lines, water heaters, valves, filters, and other equipment
![Page 4: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/4.jpg)
between supply and drain lines there is an air lock, trap, device
![Page 5: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/5.jpg)
plumbing pipes are made of: copper, pvc, cast iron, and occasionally brass
![Page 6: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/6.jpg)
![Page 7: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/7.jpg)
a typical residential plumbing layout
![Page 8: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/8.jpg)
good quality fixtures are made of brass, with chrome plating
![Page 9: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/9.jpg)
Sinks
design is about responding to, and meeting, needs.
for good designers the result of this pursuit is the
creation of something that is 'good'. 'good' is a multi-
dimensional characteristic, including things like appropriate
material use, cost and value, energy required to
manufacture, et cetera.
![Page 10: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/10.jpg)
being 'pretty' may, or may not, be a part of being 'good'.
in fact, we often say something 'looks good' precisely because it works well. the 'beauty' of something may lie in, and be revealed as, the working, functioning, of it.
think of a high performance sports car, a well designed, high quality electric tool, or a high tech, high performance running shoe. we see these as 'beautiful' because of their refinement, performance capabilities, and ingenious uses of materials andtechnologies.
this is what we call 'design'
adding a floral patter to the surface of an object, or a wall, is not design.
![Page 11: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/11.jpg)
the concept of ‘beauty’ and aesthetics
an aesthetic of functionality and of production processes needs to be
encouraged, and celebrated, in place of the aesthetic of appearance.
the phrase 'aesthetically pleasing to the eye' is not only lacking in
meaning, but it distracts from the true essence of beauty and of
appreciation.
![Page 12: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/12.jpg)
Understanding and appreciation of something may result in calling it
'beautiful'. Something that looks nice is just that, something that looks
nice.
Think of Adolf Hitler dressed in a really nice suit. Perhaps someone
might say "My he looks very nice".
![Page 13: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/13.jpg)
Knowing who Hitler was over rides our ability to say anything positive
about him, and we say "No, he is bad, period." By definition, Adolf
Hitler cannot even look nice, period.
![Page 14: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/14.jpg)
The floral covered plastic water pitcher may be 'pretty' but it is bad
design, period.
What does 'bad design' mean? Potentially many things, including; it is
wasteful of material, of energy to manufacture, it is overly expensive
for what it offers, it does not work well, it is likely to break too soon, et
cetera.
![Page 16: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/16.jpg)
The 'Gourmet' kitchen trend
The current trend in residential kitchens is to include 'gourmet' or 'chefs’
quality components.
while this may be primarily a ploy to lure people
to spend more money for a kitchen that looks fancy, it also happens to
reveal a range of products that are functionally much better than those
typically installed in a residential kitchen.
![Page 17: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/17.jpg)
The problem with this trend in kitchens is that the cost of the
components, and of the overall kitchen, is too high.
A $6,000 refrigerator, a $5,000 stove, a $7,000 granite counter top, is
too much money to spend for these items, and is a bad way to suggest
that people think about their living environment.
![Page 18: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/18.jpg)
good design does cost money, it will not occur for free, but good design can be, and should be, done at a reasonable level of expense
![Page 19: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/19.jpg)
the virtue of this type of kitchen, a 'commercial kitchen', is that it works well for preparing food, serving, and cleaning up afterwards.
![Page 20: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/20.jpg)
The design and manufacture of kitchen and bath components is, today,
better than ever before.
Components are available that are designed and produced at high
quality levels.
Look through a good design magazine, such as Domus,
Dwell, Metropolis, and you will see many interesting variations of sinks,
toilets, ovens, stoves, and refrigerators.
![Page 21: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/21.jpg)
Electricity
• Electric current or power that results from the movement of electrons in a conductor from a negatively charged point to a positively charged point.
• a fundamental phenomenon in nature seen in the attractions and repulsions of oppositely charged objects and utilized as a source of energy ion the form of a current
![Page 22: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/22.jpg)
Electricity: we can create it, control it, and use it.
![Page 23: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/23.jpg)
volts, amps, watts:
these are the terms used to discuss aspects of
electricity.
in fact the full meaning of these terms is very complex.
![Page 24: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/24.jpg)
http://www.amasci.com/miscon/elect.html
for a good explanation of the complexities of electricity, look through
this web site.
![Page 25: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/25.jpg)
The generation of electricity is most commonly achieved by converting
chemical energy in fuels or the flowing energy of wind, water, or steam
into electrical energy, using a mechanical turbine connected to a
generator.
The force of the fluid causes the turbine to rotate, which in
turn rotates the magnetic field inside the generator to produce
electricity. http://ga.water.usgs.gov/edu/hyhowworks.html
![Page 26: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/26.jpg)
Typically, a fuel such as coal or oil is burned in a boiler to produce steam. The chemical energy in the fuel becomes heat energy as it burns, forming hot gases.
The steam, under great pressure, rushes through pipes and valves and turns the steam turbine at high speed.
The turbine is made up of blades on a shaft and is driven
by the steam like wind drives a windmill.
![Page 27: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/27.jpg)
'Volts' is generally used to describe the measure of "electrical pressure" that causes current flow. (for example, typical residential electric lines have 110 volts)
'Amperes' (amps) is generally used to describethe amount of electricity in a circuit. (a typical circuit in a house is described as being 30 amp, or 20 amp, which is a descriptionof how much current there is in the circuit)
'Watts' is the term used to describe the power used by a circuit. (for example, a light bulb may use 100 watts of power to generate the level of light that it produces.)
![Page 28: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/28.jpg)
electric wiring, and electric components impact the design of interiors by:
requiring space: wires, conduit, and fixtures take
up space; hidden inside walls, floors, and ceilings, or
exposed to view.
requiring coordination: between designers and electrical
engineers.
adding heat to the space: many commercial environments
always require cooling because of internal heat generated
by occupants, electric fixtures and machines.
![Page 29: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/29.jpg)
Stair Design: General Guidelines
pages 283-297 "Interior Construction & Detailing"
2R + t = 24-25 inches
no more than 3/16" variation between successive risers and treads
residential stairs:
minimum width = 36"
maximum riser height = 8 1/4"
minimum tread depth = 9"
minimum headroom = 6'-8"
![Page 30: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/30.jpg)
non residential stairs:
minimum width = 44"
minimum height of riser= 4"
maximum riser height = 7"
minimum tread depth = 11"
minimum headroom = 6'-8”
maximum distance of travel of 12' in horizontal distance without a
landing
stairways must have a landing at the top, bottom, and at
changes of direction
![Page 31: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/31.jpg)
handrails must be on both sides of a stair
handrails are to be between 34"-38" above the stair-tread nosing
handrails are to be a minimum of 1 1/2" from the wall/mounting surface
to allow for grasping
![Page 32: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/32.jpg)
outdoor stairs, or monumental stairs do not have to
adhere to the riser and tread requirements of
egress stairs.
the width of an exit stair is calculated in terms of
'exit units' which are 22" units, based on the
idea that one person is approximately 22" wide.
![Page 33: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/33.jpg)
Ramps
ramps are to be no steeper than 1:12
a ramp may not be longer than 30' without a level landing
ramps are limited to a vertical rise of 30" between landings
the width of ramps shall not be less than the width of exit corridors: a
minimum of 44" (2 exit units)
![Page 34: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/34.jpg)
Stair calculation:
the number of risers and treads in a run of stairs
to calculate the number and size of steps in a run of stairs:
identify the required height, from finished floor, to finished floor
divide this height by the approximate height of the riser of one stepsince there can be no partial steps, round off any non-whole numbers and divide the rounded number into the height of the run of the stairs.
this number is the accurate size of one riser, to the nearest tenth of an inch.
plug the riser height into the 2R+T=24-25 formula to determine how long each tread needs to be
![Page 35: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/35.jpg)
Let's say that we need a stair to go from the first floor of Cutler Hall, to the second floor.
The distance, from the first floor finished surface, to the second floor, finished floor surface is to be 13'-7".
How many risers and treads are needed to
make a legal stairway here?
![Page 36: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/36.jpg)
First convert the vertical distance to be covered by the stair to inches:
13'-7" = 163”
Assume 7" as a beginning size for a riser
163 divided by 7 = 23.28
Now, we know that you cannot have 23.28 risers; risers must be a whole
number.
![Page 37: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/37.jpg)
We could take 23 as a total riser number, which would produce a riser that is
greater than 7", which is not allowed by code, so we will take 24 as a total riser
number.
So, take 24, and divide 163 by 24, which is 6.7916": this is the height of each
riser, in the run of 24 that makes this stairway.
![Page 38: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/38.jpg)
So, to determine the number, and height of the risers in a stairway, take the
total height of the stairway, in inches, and divide it by 7" as a way to determine
a close number of risers. (if this comes out to a whole number, then you are
done)
Then take the total height in inches, and divide it by the number of risers to
arrive at a precise riser height dimension.
![Page 39: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/39.jpg)
In construction tolerances vary: factory made=more precisionjob site made= less precision
• In terms of construction, a stairway can be manufactured in varying levels of precision.
• If the stairway is a factory made, steel construction, then the precise dimension of the riser height can be very accurate, to a sixteenth of an inch even.
![Page 40: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/40.jpg)
• If the stairway is to be constructed on the job site, and especially if it is to be made of wood, then the sizes cannot be held to a tolerance any more precise than 1/8".
![Page 41: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/41.jpg)
![Page 42: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/42.jpg)
![Page 43: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/43.jpg)
![Page 44: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/44.jpg)
![Page 45: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/45.jpg)
![Page 46: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/46.jpg)
![Page 47: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/47.jpg)
![Page 48: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/48.jpg)
open riser stair
![Page 49: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/49.jpg)
spiral stairs
![Page 50: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/50.jpg)
Elevators:hydraulic
![Page 51: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/51.jpg)
Elevators: geared traction
![Page 52: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/52.jpg)
Elisha Graves Otis
• Perched on a hoisting platform high above the crowd at New York’s Crystal Palace, a pragmatic mechanic shocked the crowd when he dramatically cut the only rope suspending the platform on which he was standing.
• The platform dropped a few inches, but then came to a stop. His revolutionary new safety brake had worked, stopping the platform from crashing to the ground. “All safe, gentlemen!” the man proclaimed.
![Page 53: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/53.jpg)
Mr. Otis demonstrating the safety of his elevators
![Page 54: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/54.jpg)
Otis elevator company, 1853
• The man riding the hoist was Elisha Graves Otis, the founder and namesake of our company. With his safety brake, Otis literally started the elevator industry.
• His invention enabled buildings – and architects’ imaginations – to climb ever skyward, giving a new and bolder shape to the modern urban skyline.
Mr. Otis sold his first safe elevators in 1853.
![Page 55: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/55.jpg)
• elevators are described by their carrying capacity, speed of travel, and mechanical type.
• Otis Geared Elevonic, 3500, 300fpm
![Page 56: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/56.jpg)
![Page 57: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/57.jpg)
![Page 58: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/58.jpg)
elevator scheme for a high rise building
![Page 59: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/59.jpg)
elevators in public buildings are required to meet ADA (Americans with Disabilities) accessibility codes
![Page 60: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/60.jpg)
elevators in open atrium spaces:mechanical components are visible
![Page 61: Plumbing Systems](https://reader036.vdocument.in/reader036/viewer/2022062309/56813d64550346895da73c85/html5/thumbnails/61.jpg)
the components in a hydraulic elevator