pm1 low voltage 75va (electronic transformer - tree … · pm1 low voltage 75va (electronic...
TRANSCRIPT
DATE:
CATALOG NUMBER LOGIC:
PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - TREE STRAP)
CATALOG NUMBER LOGIC
Example: PM1 - TS-18 - TRSS75 - 1 - BZW - 120 - SC
MATERIAL
Aluminum
SERIES
PM1 - Universal Power Module 1
MOUNTING
TS-Length - Tree Strap (Specify adjustable strap length) 18” Standard Min.
TRANSFORMER TYPE
TRSS75 - 75VA Electronic Transformer*
TRe20 - TRe20 Electronic Transformer**
FIXTURE MOUNTING
1 - Offset
2 - Center***
FINISH
Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)
Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)
(Also available in RAL Finishes. See submittal SUB-1439-00)
INPUT VOLTAGE
(Blank) - For use with TRe20 Electronic Transformer**
120 - 120 VAC (For use with TRSS75)
230 - 230 VAC**** (Electronic only, for use with TRSS75)
277 - 277 VAC**** (For use with TRSS75)
OPTIONS
SC - Safety Cable for use with Tree Strap Mount. Cable length to match strap length. 18” Standard Min.
MB - Mounting Brackets
ORDER FIXTURE SEPARATELY.
01/20/2020 SKU-682 P1
*75W max. electronic transformer allows up to 10’ spacing between fixtures. For use with LED fixtures. For use with MR16 LED Lamp fixtures
**105-300 VAC. 50/60 Hz. non-dimming. For use with LED fixtures.
***Center fixture position available with TRSS-75 transformer type only.
****Non-dimming.
DATE: PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - TREE STRAP)
6 13/16"(173mm)
3 3/8"(86mm) 3" (76mm) Minimum
Specify Length
2" (51mm)
Adjustable Nylon Strap
FRONT VIEW
(2) 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)
END VIEW
Safety Cable withOptional
Secure Connection,No Tools RequiredFor Assembly
SAFETY CABLE
(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)
2 1/4"(57mm)
1 3/4"(44mm)
7 7/8"(200mm)
O.C.
OPTIONAL MOUNTING BRACKET
SIDE VIEW
Fixture d
6 1/2"(165mm)
2 1/4"(57mm)
3 7/8"(98mm)
01/20/2020 SKU-682 P1
ORDER FIXTURE SEPARATELY.
DATE: PROJECT: TYPE:
Accessories (Configure separately)
SPECIFICATIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
Electrical
PHYSICAL
TRSS-75 TRANSFORMER For use with halogen lamps. One (1) 75VA electronic low voltage transformer. 120, 230, or 277VAC primary voltage. 120V is dimmable (40W minimum load) using electronic low voltage dimmer. 10 watt minimum load (non-dimmed). 50/60Hz. 11.6VAC secondary voltage. >.93 Power Factor. <20% THD. Operating frequency >10kHz. Primary overload protection and RFI filtration. Soft start circuitry extends lamp life.
TRe20 ELECTRONIC TRANSFORMER
One (1) 20VA electronic low voltage transformer 105-330VAC primary voltage. 1W minimum load. 20W maximum load. 50/60Hz. Non-dimming. 12VDC secondary voltage. >90% Power Factor. >80% efficiency (under full load). Inrush current limited to <5A max. Thermal shutdown with autorestart. Overload, short circuit, and open circuit protection.
TREE INSTALLATION Tree Strap mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Stainless steel safety cable maintains UPM mounting when nylon strap is disengaged.
HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
PATENTED KNOCKOUTS Four (4) 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).
WARRANTY 5-year limited warranty.
CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.
01/20/2020 SKU-682 P1
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - TREE STRAP) ORDER FIXTURE SEPARATELY.
DATE:
CATALOG NUMBER LOGIC:
PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - SURFACE MOUNT)
CATALOG NUMBER LOGIC
Example: PM1 - SM - TRSS75 - 1 - BZW - 120
MATERIAL
Aluminum
SERIES
PM1 - Universal Power Module 1
MOUNTING
SM - Surface Mount
TRANSFORMER TYPE
TRSS75 - 75VA Electronic Transformer*
TRe20 - TRe20 Electronic Transformer**
FIXTURE MOUNTING
1 - Offset
2 - Center***
FINISH
Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)
Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)
(Also available in RAL Finishes. See submittal SUB-1439-00)
INPUT VOLTAGE
(Blank) - For use with TRe20 Electronic Transformer**
120 - 120 VAC (For use with TRSS75)
230 - 230 VAC**** (Electronic only, for use with TRSS75)
277 - 277 VAC**** (For use with TRSS75)
01/20/2020 SKU-682 P2
*75W max. electronic transformer allows up to 10’ spacing between fixtures. For use with LED fixtures. For use with MR16 LED Lamp fixtures
**105-300 VAC. 50/60 Hz. non-dimming. For use with LED fixtures.
***Center fixture position available with TRSS-75 transformer type only.
****Non-dimming.
ORDER FIXTURE SEPARATELY.
DATE: PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - SURFACE MOUNT)
(4) 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)
2 3/8" (60mm)With Supplied
Mounting Bracket
END VIEW
(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)
2 1/4"(57mm)
1 3/4"(44mm)
7 7/8"(200mm)
6 1/2"(165mm)
O.C.
O.C.
7 3/8"(187mm)
3 3/8"(86mm)
FRONT VIEW
(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)
2 1/4"(57mm)
1 3/4"(44mm)
7 7/8"(200mm)
6 1/2"(165mm)
O.C.
O.C.
7 3/8"(187mm)
3 3/8"(86mm)
FRONT VIEW SIDE VIEW
3 7/8"(98mm)
01/20/2020 SKU-682 P2
ORDER FIXTURE SEPARATELY.
DATE: PROJECT: TYPE:
Accessories (Configure separately)
SPECIFICATIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
Electrical
PHYSICAL
TRSS-75 TRANSFORMER For use with halogen lamps. One (1) 75VA electronic low voltage transformer. 120, 230, or 277VAC primary voltage. 120V is dimmable (40W minimum load) using electronic low voltage dimmer. 10 watt minimum load (non-dimmed). 50/60Hz. 11.6VAC secondary voltage. >.93 Power Factor. <20% THD. Operating frequency >10kHz. Primary overload protection and RFI filtration. Soft start circuitry extends lamp life.
TRe20 ELECTRONIC TRANSFORMER
One (1) 20VA electronic low voltage transformer 105-330VAC primary voltage. 1W minimum load. 20W maximum load. 50/60Hz. Non-dimming. 12VDC secondary voltage. >90% Power Factor. >80% efficiency (under full load). Inrush current limited to <5A max. Thermal shutdown with autorestart. Overload, short circuit, and open circuit protection.
SURFACE MOUNT For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.
HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
PATENTED KNOCKOUTS Four (4) 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).
WARRANTY 5-year limited warranty.
CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.
01/20/2020 SKU-682 P2
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - SURFACE MOUNT) ORDER FIXTURE SEPARATELY.
DATE:
CATALOG NUMBER LOGIC:
PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - JUNCTION BOX)
CATALOG NUMBER LOGIC
Example: PM1 - CR - TRSS75 - 1 - BZW - 120 - MB
MATERIAL
Aluminum
SERIES
PM1 - Universal Power Module 1
MOUNTING
CR - Round Camlock Canopy (Recessed Junction Box)
CT - Rectangular Camlock Canopy (Recessed Junction Box)
TRANSFORMER TYPE
TRSS75 - 75VA Electronic Transformer*
TRe20 - TRe20 Electronic Transformer**
FIXTURE MOUNTING
1 - Offset
2 - Center***
FINISH
Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)
Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)
(Also available in RAL Finishes. See submittal SUB-1439-00)
INPUT VOLTAGE
(Blank) - For use with TRe20 Electronic Transformer**
120 - 120 VAC (For use with TRSS75)
230 - 230 VAC**** (Electronic only, for use with TRSS75)
277 - 277 VAC**** (For use with TRSS75)
OPTIONS
MB - Mounting Brackets
01/20/2020 SKU-682 P3
*75W max. electronic transformer allows up to 10’ spacing between fixtures. For use with LED fixtures. For use with MR16 LED Lamp fixtures
**105-300 VAC. 50/60 Hz. non-dimming. For use with LED fixtures.
***Center fixture position available with TRSS-75 transformer type only.
****Non-dimming.
ORDER FIXTURE SEPARATELY.
DATE: PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - JUNCTION BOX)
3"(76mm)
3 1/4"(83mm)
O.C.5"(127mm)
1/8"(3mm)
RECTANGULAR CAMLOCK™ CANOPY
5" Dia.(127mm)
1/8"(3mm)
1/8"(3mm)
ROUND CAMLOCK™ CANOPY
END VIEW
(4) 1/2" (13mm) KnockoutsFor Use with SurfaceConduit (By Others)
2 1/2"(64mm)
With SuppliedMounting Plate
3 3/8"(86mm)
6 1/2"(165mm)
FRONT VIEW
(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)
2 1/4"(57mm)
1 3/4"(44mm)
7 7/8"(200mm)
O.C.
OPTIONAL MOUNTING BRACKET
3 7/8"(98mm)
SIDE VIEW
01/20/2020 SKU-682 P3
ORDER FIXTURE SEPARATELY.
DATE: PROJECT: TYPE:
Accessories (Configure separately)
SPECIFICATIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
Electrical
PHYSICAL
TRSS-75 TRANSFORMER For use with halogen lamps. One (1) 75VA electronic low voltage transformer. 120, 230, or 277VAC primary voltage. 120V is dimmable (40W minimum load) using electronic low voltage dimmer. 10 watt minimum load (non-dimmed). 50/60Hz. 11.6VAC secondary voltage. >.93 Power Factor. <20% THD. Operating frequency >10kHz. Primary overload protection and RFI filtration. Soft start circuitry extends lamp life.
TRe20 ELECTRONIC TRANSFORMER
One (1) 20VA electronic low voltage transformer 105-330VAC primary voltage. 1W minimum load. 20W maximum load. 50/60Hz. Non-dimming. 12VDC secondary voltage. >90% Power Factor. >80% efficiency (under full load). Inrush current limited to <5A max. Thermal shutdown with autorestart. Overload, short circuit, and open circuit protection.
ROUND CAMLOCK CANOPY (RECESSED JUNCTION BOX)
5” dia., machined aluminum construction. Includes stainless steel universal mounting ring for use with 4” octagonal junction box. Two (2) tamper-resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.
RECTANGULAR CAMLOCK CANOPY (RECESSED JUNCTION BOX)
Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
PATENTED KNOCKOUTS Four (4) 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).
WARRANTY 5-year limited warranty.
CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.
01/20/2020 SKU-682 P3
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - JUNCTION BOX) ORDER FIXTURE SEPARATELY.
DATE:
CATALOG NUMBER LOGIC:
PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - MONUMENT)
CATALOG NUMBER LOGIC
Example: PM1 - MU - TRSS75 - 1 - BZW - 120
MATERIAL
Aluminum
SERIES
PM1 - Universal Power Module 1
MOUNTING
MU - Monument Mount (with 18” Power Pipe)
TRANSFORMER TYPE
TRSS75 - 75VA Electronic Transformer*
TRe20 - TRe20 Electronic Transformer**
FIXTURE MOUNTING
1 - Offset
2 - Center***
FINISH
Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)
Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)
(Also available in RAL Finishes. See submittal SUB-1439-00)
INPUT VOLTAGE
(Blank) - For use with TRe20 Electronic Transformer**
120 - 120 VAC (For use with TRSS75)
230 - 230 VAC**** (Electronic only, for use with TRSS75)
277 - 277 VAC**** (For use with TRSS75)
01/20/2020 SKU-682 P4
*75W max. electronic transformer allows up to 10’ spacing between fixtures. For use with LED fixtures. For use with MR16 LED Lamp fixtures
**105-300 VAC. 50/60 Hz. non-dimming. For use with LED fixtures.
***Center fixture position available with TRSS-75 transformer type only.
****Non-dimming.
ORDER FIXTURE SEPARATELY.
DATE: PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - MONUMENT)
2 3/8" (60mm)With Supplied
Mounting Bracket(4) 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)
END VIEW
(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)
2 1/4"(57mm)
7 7/8"(200mm)
6 1/2"(165mm)
7 3/8"(187mm)
O.C.
1 3/4"(44mm)
O.C.
3 3/8"(86mm)
3 7/8"(98mm)
FRONT VIEW
Grade
(2) 1/2" (13mm) PVC Slip Connectors
Watertight Connectors
18"(457mm)
1 1/2"(38mm)
O.C.
2 3/8" (60mm) Dia. PVC Power Pipe™
Anti-Siphon (ASV™)Wire Pass Through
6" Dia.(152mm)
StabilityFlange
7/8"(22mm)
SIDE VIEW
01/20/2020 SKU-682 P4
ORDER FIXTURE SEPARATELY.
DATE: PROJECT: TYPE:
Accessories (Configure separately)
SPECIFICATIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
Electrical
PHYSICAL
TRSS-75 TRANSFORMER For use with halogen lamps. One (1) 75VA electronic low voltage transformer. 120, 230, or 277VAC primary voltage. 120V is dimmable (40W minimum load) using electronic low voltage dimmer. 10 watt minimum load (non-dimmed). 50/60Hz. 11.6VAC secondary voltage. >.93 Power Factor. <20% THD. Operating frequency >10kHz. Primary overload protection and RFI filtration. Soft start circuitry extends lamp life.
TRe20 ELECTRONIC TRANSFORMER
One (1) 20VA electronic low voltage transformer 105-330VAC primary voltage. 1W minimum load. 20W maximum load. 50/60Hz. Non-dimming. 12VDC secondary voltage. >90% Power Factor. >80% efficiency (under full load). Inrush current limited to <5A max. Thermal shutdown with autorestart. Overload, short circuit, and open circuit protection.
GROUND/MONUMENT INSTALLATION
For use at grade level with integration of Power Pipe system, which provides direct burial wireway in concrete or soil. 6” dia., molded stability flange projects into substrate to simplify installation and reinforce housing stability. Two (2) 1/2” PVC slip connectors for through wiring. Includes stainless steel mounting brackets for additional anchor to architectural surface. Anti-Siphon Valve (ASV) prevents “wicking” through conductor insulation. Three (3) silicone filled wire nuts supplied for water-tight line connection. Maximum two (2) #10 & one (1) #18. Minimum one (1) #12 & one (1) #18.
HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
PATENTED KNOCKOUTS Four (4) 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).
WARRANTY 5-year limited warranty.
CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.
01/20/2020 SKU-682 P4
PM1 LOW VOLTAGE 75VA (ELECTRONIC TRANSFORMER - MONUMENT) ORDER FIXTURE SEPARATELY.
DATE:
CATALOG NUMBER LOGIC:
PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - TREE STRAP)
CATALOG NUMBER LOGIC
Example: PM1D - TS-18 - TRSS75 - BZW - 120 - SC
MATERIAL
Aluminum
SERIES
PM1D - Universal Power Module 1 Dual
MOUNTING
TS-Length - Tree Strap (Specify adjustable strap length) 18” Standard Min.
TRANSFORMER TYPE
TRSS75 - 75VA Electronic Transformers*
TRe20 - (2) TRe20 Electronic Transformers**
FINISH
Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)
Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)
(Also available in RAL Finishes. See submittal SUB-1439-00)
INPUT VOLTAGE
(Blank) - For use with TRe20 Electronic Transformers**
120 - 120 VAC (For use with TRSS75)
230 - 230 VAC*** (Electronic only, for use with TRSS75)
277 - 277 VAC*** (For use with TRSS75)
OPTIONS
SC - Safety Cable for use with Tree Strap Mount. Cable length to match strap length. 18” Standard Min.
MB - Mounting Brackets
01/21/2020 SKU-690 P1
*75W max. electronic transformer allows up to 10’ spacing between fixtures. For use with LED fixtures. For use with MR16 LED Lamp fixtures
**105-300 VAC. 50/60 Hz. non-dimming. For use with LED fixtures.
***Non-dimming.
ORDER FIXTURES SEPARATELY.
DATE: PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - TREE STRAP)
2 1/4"(57mm)
7 3/4"(197mm)
5 1/8"(130mm)
O.C.
3 7/8"(98mm)
SIDE VIEW
Safety Cable withOptional
Secure Connection,No Tools RequiredFor Assembly
SAFETY CABLE
(2) 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)
END VIEW
6 13/16"(173mm)
3 3/8"(86mm) 3" (76mm) Minimum
Specify Length
2" (51mm)
Adjustable Nylon Strap
FRONT VIEW
(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)O.C.
2 1/4"(57mm)
9 1/8"(232mm)
1 3/4"(44mm)
OPTIONAL MOUNTING BRACKET
01/21/2020 SKU-690 P1
ORDER FIXTURES SEPARATELY.
DATE: PROJECT: TYPE:
Accessories (Configure separately)
SPECIFICATIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
Electrical
PHYSICAL
TRSS-75 TRANSFORMER For use with halogen lamps. One (1) 75VA electronic low voltage transformer. 120, 230, or 277VAC primary voltage. 120V is dimmable (40W minimum load) using electronic low voltage dimmer. 10 watt minimum load (non-dimmed). 50/60Hz. 11.6VAC secondary voltage. >.93 Power Factor. <20% THD. Operating frequency >10kHz. Primary overload protection and RFI filtration. Soft start circuitry extends lamp life.
TRe20 ELECTRONIC TRANSFORMER
One (1) 20VA electronic low voltage transformer 105-330VAC primary voltage. 1W minimum load. 20W maximum load. 50/60Hz. Non-dimming. 12VDC secondary voltage. >90% Power Factor. >80% efficiency (under full load). Inrush current limited to <5A max. Thermal shutdown with autorestart. Overload, short circuit, and open circuit protection.
TREE INSTALLATION Tree Strap mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Stainless steel safety cable maintains UPM mounting when nylon strap is disengaged.
HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
PATENTED KNOCKOUTS Four (4) 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).
WARRANTY 5-year limited warranty.
CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.
01/21/2020 SKU-690 P1
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - TREE STRAP) ORDER FIXTURES SEPARATELY.
DATE:
CATALOG NUMBER LOGIC:
PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - SURFACE MOUNT)
CATALOG NUMBER LOGIC
Example: PM1D - SM - TRSS75 - BZW - 120
MATERIAL
Aluminum
SERIES
PM1D - Universal Power Module 1 Dual
MOUNTING
SM - Surface Mount
TRANSFORMER TYPE
TRSS75 - 75VA Electronic Transformers*
TRe20 - (2) TRe20 Electronic Transformers**
FINISH
Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)
Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)
(Also available in RAL Finishes. See submittal SUB-1439-00)
INPUT VOLTAGE
(Blank) - For use with TRe20 Electronic Transformers**
120 - 120 VAC (For use with TRSS75)
230 - 230 VAC*** (Electronic only, for use with TRSS75)
277 - 277 VAC*** (For use with TRSS75)
01/21/2020 SKU-690 P2
*75W max. electronic transformer allows up to 10’ spacing between fixtures. For use with LED fixtures. For use with MR16 LED Lamp fixtures
**105-300 VAC. 50/60 Hz. non-dimming. For use with LED fixtures.
***Non-dimming.
ORDER FIXTURES SEPARATELY.
DATE: PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - SURFACE MOUNT)
(4) 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)
2 3/8"(60mm)
With SuppliedMounting Bracket
END VIEW
Fixture
5 1/8"(130mm)
O.C.
3 7/8"(98mm)
SIDE VIEW
(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)O.C.
2 1/4"(57mm)
O.C.
9 1/8"(232mm)
7 3/4"(197mm)
8 5/8"(219mm)
1 3/4"(44mm)
3 3/8"(86mm)
TOP VIEW
01/21/2020 SKU-690 P2
ORDER FIXTURES SEPARATELY.
DATE: PROJECT: TYPE:
Accessories (Configure separately)
SPECIFICATIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
Electrical
PHYSICAL
TRSS-75 TRANSFORMER For use with halogen lamps. One (1) 75VA electronic low voltage transformer. 120, 230, or 277VAC primary voltage. 120V is dimmable (40W minimum load) using electronic low voltage dimmer. 10 watt minimum load (non-dimmed). 50/60Hz. 11.6VAC secondary voltage. >.93 Power Factor. <20% THD. Operating frequency >10kHz. Primary overload protection and RFI filtration. Soft start circuitry extends lamp life.
TRe20 ELECTRONIC TRANSFORMER
One (1) 20VA electronic low voltage transformer 105-330VAC primary voltage. 1W minimum load. 20W maximum load. 50/60Hz. Non-dimming. 12VDC secondary voltage. >90% Power Factor. >80% efficiency (under full load). Inrush current limited to <5A max. Thermal shutdown with autorestart. Overload, short circuit, and open circuit protection.
SURFACE MOUNT For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.
HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
PATENTED KNOCKOUTS Four (4) 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).
WARRANTY 5-year limited warranty.
CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.
01/21/2020 SKU-690 P2
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - SURFACE MOUNT) ORDER FIXTURES SEPARATELY.
DATE:
CATALOG NUMBER LOGIC:
PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - JUNCTION BOX)
CATALOG NUMBER LOGIC
Example: PM1D - CR - TRSS75 - BZW - 120 - MB
MATERIAL
Aluminum
SERIES
PM1D - Universal Power Module 1 Dual
MOUNTING
CR - Round Camlock Canopy (Recessed Junction Box)
CT - Rectangular Camlock Canopy (Recessed Junction Box)
TRANSFORMER TYPE
TRSS75 - 75VA Electronic Transformers*
TRe20 - (2) TRe20 Electronic Transformers**
FINISH
Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)
Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)
(Also available in RAL Finishes. See submittal SUB-1439-00)
INPUT VOLTAGE
(Blank) - For use with TRe20 Electronic Transformers**
120 - 120 VAC (For use with TRSS75)
230 - 230 VAC*** (Electronic only, for use with TRSS75)
277 - 277 VAC*** (For use with TRSS75)
OPTIONS
MB - Mounting Brackets
01/21/2020 SKU-690 P3
*75W max. electronic transformer allows up to 10’ spacing between fixtures. For use with LED fixtures. For use with MR16 LED Lamp fixtures
**105-300 VAC. 50/60 Hz. non-dimming. For use with LED fixtures.
***Non-dimming.
ORDER FIXTURES SEPARATELY.
DATE: PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - JUNCTION BOX)
3"(76mm)
3 1/4"(83mm)
O.C.5"(127mm)
1/8"(3mm)
RECTANGULAR CAMLOCK™ CANOPY
5" Dia.(127mm)
1/8"(3mm)
1/8"(3mm)
ROUND CAMLOCK™ CANOPY
END VIEW
(4) 1/2" (13mm) KnockoutsFor Use with SurfaceConduit (By Others)
2 1/2"(64mm)
With SuppliedMounting Plate
7 3/4"(197mm)
3 3/8"(86mm)
TOP VIEW
5 1/8"(130mm)
O.C.
3 7/8"(98mm)
SIDE VIEW
(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)O.C.
2 1/4"(57mm)
9 1/8"(232mm)
1 3/4"(44mm)
OPTIONAL MOUNTING BRACKET
01/21/2020 SKU-690 P3
ORDER FIXTURES SEPARATELY.
DATE: PROJECT: TYPE:
Accessories (Configure separately)
SPECIFICATIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
Electrical
PHYSICAL
TRSS-75 TRANSFORMER For use with halogen lamps. One (1) 75VA electronic low voltage transformer. 120, 230, or 277VAC primary voltage. 120V is dimmable (40W minimum load) using electronic low voltage dimmer. 10 watt minimum load (non-dimmed). 50/60Hz. 11.6VAC secondary voltage. >.93 Power Factor. <20% THD. Operating frequency >10kHz. Primary overload protection and RFI filtration. Soft start circuitry extends lamp life.
TRe20 ELECTRONIC TRANSFORMER
One (1) 20VA electronic low voltage transformer 105-330VAC primary voltage. 1W minimum load. 20W maximum load. 50/60Hz. Non-dimming. 12VDC secondary voltage. >90% Power Factor. >80% efficiency (under full load). Inrush current limited to <5A max. Thermal shutdown with autorestart. Overload, short circuit, and open circuit protection.
ROUND CAMLOCK CANOPY (RECESSED JUNCTION BOX)
5” dia., machined aluminum construction. Includes stainless steel universal mounting ring for use with 4” octagonal junction box. Two (2) tamper-resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.
RECTANGULAR CAMLOCK CANOPY (RECESSED JUNCTION BOX)
Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
PATENTED KNOCKOUTS Four (4) 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).
WARRANTY 5-year limited warranty.
CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.
01/21/2020 SKU-690 P3
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - JUNCTION BOX) ORDER FIXTURES SEPARATELY.
DATE:
CATALOG NUMBER LOGIC:
PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - MONUMENT)
CATALOG NUMBER LOGIC
Example: PM1D - MU - TRSS75 - BZW - 120
MATERIAL
Aluminum
SERIES
PM1D - Universal Power Module 1 Dual
MOUNTING
MU - Monument Mount (with 18” Power Pipe)
TRANSFORMER TYPE
TRSS75 - 75VA Electronic Transformers*
TRe20 - (2) TRe20 Electronic Transformers**
FINISH
Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)
Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)
(Also available in RAL Finishes. See submittal SUB-1439-00)
INPUT VOLTAGE
(Blank) - For use with TRe20 Electronic Transformers**
120 - 120 VAC (For use with TRSS75)
230 - 230 VAC*** (Electronic only, for use with TRSS75)
277 - 277 VAC*** (For use with TRSS75)
01/21/2020 SKU-690 P4
*75W max. electronic transformer allows up to 10’ spacing between fixtures. For use with LED fixtures. For use with MR16 LED Lamp fixtures
**105-300 VAC. 50/60 Hz. non-dimming. For use with LED fixtures.
***Non-dimming.
ORDER FIXTURES SEPARATELY.
DATE: PROJECT: TYPE:
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - MONUMENT)
2 3/8"(60mm)
With SuppliedMounting Bracket
(4) 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)
END VIEW(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)
O.C.
3 3/8"(86mm)
O.C.
9 1/8"(232mm)
7 3/4"(197mm)
8 5/8"(219mm)
1 3/4"(44mm)
2 1/4"(57mm)
3 7/8"(98mm)
TOP VIEW
Grade
(2) 1/2" (13mm) PVC Slip Connectors
18"(457mm)
5 1/8"(130mm)
O.C.
1 1/2"(38mm)
O.C.
2 3/8" (60mm) Dia. PVC Power Pipe™
Watertight Connectors
Anti-Siphon (ASV™)Wire Pass Through
6" Dia(152mm)
StabilityFlange
7/8"(22mm)
SIDE VIEW
01/21/2020 SKU-690 P4
ORDER FIXTURES SEPARATELY.
DATE: PROJECT: TYPE:
Accessories (Configure separately)
SPECIFICATIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
559.438.5800 | [email protected] | BKLIGHTING.COMMADE IN THE USA
Electrical
PHYSICAL
TRSS-75 TRANSFORMER For use with halogen lamps. One (1) 75VA electronic low voltage transformer. 120, 230, or 277VAC primary voltage. 120V is dimmable (40W minimum load) using electronic low voltage dimmer. 10 watt minimum load (non-dimmed). 50/60Hz. 11.6VAC secondary voltage. >.93 Power Factor. <20% THD. Operating frequency >10kHz. Primary overload protection and RFI filtration. Soft start circuitry extends lamp life.
TRe20 ELECTRONIC TRANSFORMER
One (1) 20VA electronic low voltage transformer 105-330VAC primary voltage. 1W minimum load. 20W maximum load. 50/60Hz. Non-dimming. 12VDC secondary voltage. >90% Power Factor. >80% efficiency (under full load). Inrush current limited to <5A max. Thermal shutdown with autorestart. Overload, short circuit, and open circuit protection.
GROUND/MONUMENT INSTALLATION
For use at grade level with integration of Power Pipe system, which provides direct burial wireway in concrete or soil. 6” dia., molded stability flange projects into substrate to simplify installation and reinforce housing stability. Two (2) 1/2” PVC slip connectors for through wiring. Includes stainless steel mounting brackets for additional anchor to architectural surface. Anti-Siphon Valve (ASV) prevents “wicking” through conductor insulation. Three (3) silicone filled wire nuts supplied for water-tight line connection. Maximum two (2) #10 & one (1) #18. Minimum one (1) #12 & one (1) #18.
HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.
INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
PATENTED KNOCKOUTS Four (4) 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).
WARRANTY 5-year limited warranty.
CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.
01/21/2020 SKU-690 P4
PM1D DUAL LOW VOLTAGE (TRANSFORMERS - MONUMENT) ORDER FIXTURES SEPARATELY.