pnd marine‘a’ manufacturing technology welding & fabrication
DESCRIPTION
PND MARINE‘A’ MANUFACTURING TECHNOLOGY WELDING & FABRICATION. MEAN MACHINE FARIHAN (LEADER) RITHAUDEEN SASHA AZIM. INTRODUCTION CONTENT 3 ‘WHAT’ DETAIL LAYOUT SLOGAN REFERENCES. SAFETY RULES. Always listen carefully to the teacher and follow instructions. - PowerPoint PPT PresentationTRANSCRIPT
PND MARINE‘A’MANUFACTURING TECHNOLOGY
WELDING & FABRICATION
MEAN MACHINEFARIHAN (LEADER)
RITHAUDEEN SASHA
AZIM
INTRODUCTION CONTENT 3 ‘WHAT’ DETAIL LAYOUT SLOGAN REFERENCES
SAFETY RULES1. Always listen carefully to the teacher and follow instructions.
2. Do not run in the workshop, you could ‘bump’ into another pupil and cause an accident.
3. Know where the emergency stop buttons are positioned in the workshop.
4. Wear good strong shoes.
5. When attempting practical work all stools should be put away.
6. Bags should not be brought into a workshop.
7. Do not use a machine if you have not been shown how to operate it safely by the teacher.
8. Always be patient, never rush in the workshop.
9. Always use a guard when working on a machine.
10. hands away from moving/rotating machinery.
11. Use hand tools carefully, keeping both hands behind the cutting edge.
12. Report any damage to machines/equipment as this could cause an accident.
WELDING & FABRICATION
Welding is the main focus of steel fabrication. The formed and machined parts will be assembled and tack welded into place then re-checked for accuracy. A fixture may be used to locate parts for welding if multiple elements have been ordered.
FABRICATION ; when used as an industrial term, applies to the building of machines, structures and other equipment, by cutting, shaping and assembling components made from raw materials.
3 “WHAT”
WHAT CAN GO WRONG?
WHAT CAN CAUSE IT TO GO WRONG?
WHAT CAN BE DONE TO PREVENT IT?
WHAT CAN GO WRONG? Radiation
Eye injury
Fires
Poisonous Fumes
Electric shock
Serious accident
Burns
WHAT CAUSE IT TO GO WRONG?
Didn’t use personal protective equipment (PPE).
Didn’t have any fire extinguisher. Didn’t remove any accessories during
operating any machine such as necklace, bracelets etc.
Smoking at the workshop. Some equipments improper placing. Sit on the machines Incomplete safety equipment. Wet and dirty floor.
WHAT CAN BE DONE TO PREVENT IT?
Use personal protective equipment (PPE). Have any fire extinguisher. Remove any accessories during operating
any machine such as necklace, bracelets etc.
No smoking in the workshop. The equipments must proper placing. Do not sit on the machines Good housekeeping practice Behave at workshop.
WELDING &
FABRICATION’SBUILDING
SLOGAN
“ WE ARE RESPONSIBLE FOR OUR OWN SAFETY, AND THE SAFETY OF OTHERS AROUND US “
REFERENCES
WIKIPEDIA
MEAN MACHINE’S TEAM MEMBERS
HANS DEEN SYASHA AZIM ( AKU ROCK X aa..\m/) (AKU AYU KH?)(PENYANYI KH?) (Laki2 terakhir
kn?)
WILL BE AN ENGINEER IN THE FUTURE…. AMIN….