pneumatic rack and pinion actuators series xrpseungjineng.co.kr/main/downfile/xomox xrp pneumatic...
TRANSCRIPT
brands you trust.
Pneumatic Rack and Pinion Actuators Series XRP
www.cranechempharma.com
HOW TO SPECIFYHOW TO SPECIFY
X D 180 S 08 B 0 0 00 0
BrandXomox :
Pinion & PortingISO 5211/DIN 3337 Diamond,
Gas 45° threads. ISO 5211 Square, NPT:
Example:
STOCKED ACTUATOR CONFIGURATIONSPart Number
(Utilize 9 digits as a minimum)
NON-STANDARD MODIFICATIONSOptions
(Use only if non-standard required)
Size001, 002, 006,
012, 025, 050, 090, 130, 180,205, 380, 630, 960, H15:
ActionDouble Acting:
single acting fail close:single acting fail open:
Double Acting, no springs:Spring return, 02 thru 18 spring combinations:
Limit & Travel StopNo limit or travelstops (excepted 001-006 with limit stop to open as standard)
Dual travel Stops, std on 012 to 180, Integral to design, With 8 degrees of over travel:
Limit stop to open/close as option for sizes 205-H15:
TemperatureStandard Nitrile seals (Buna-N rubber):
Low Temperature seals:High Temperature seals:
CoatingStandard Anodized Body & Polyurethane Coated end caps:
Consult factory for other options:
OtherStandard anodized aluminum pinion:
Consult factory for other options:
Mounting ConfigurationStandard ISO F-pattern for each body size:
Refer to page 10 for optional mounting configurations:
X
xxx
DSA
00xx
AB
012
0X
0X
00X
D
S
# Springs
C
Standardized accessory interfacesper VDI/VDE 3845 (NAMUR)(most actuators)
Aluminum body with anodizedsurfaces for superior corrosionprotection inside and outside
Large air passages provide for amaximized speed of operation
Self-lubricating piston guide bandsare positioned to negate side thrustwhile providing minimal sliding frictionand higher actuator efficiencies
Position indicator perNAMUR standard
Stainless steel end cap fasteners
© Copyright Xomox Corporation 2003All rights reserved. Xomox®, Tuflin® are registered trademarks of Xomox corporation.Xomox XRP is a trademark of Xomox Corporation.
DESIGN FEATURDESIGN FEATUR
Blow out proof pinion & bushings,no exterior corrosion-susceptiblesnap rings
Self-lubricating piston guide bands arepositioned to negate side thrust whileproviding minimal sliding friction andhigher actuator efficiencies
Large air passages provide for amaximized speed of operation
Maximized gear tooth engagement
Standardized accessory interfacesper VDI/VDE 3845 (NAMUR)
RES & BENEFITSRES & BENEFITS
Travel Stops open/close for sizes 012 - 180Bottom flanged external limit Stops
open/close for sizes 205 - H15
Worldwide capabilities
No matter where in the world youare, located XOMOX technicalsupport and services are availablefor you from:• 18 Manufacturing Facilities• 18 Service Centers• 50 Sales Offices
Product selection
XOMOX offers the broadest line of
process valves, actuators,
accessories, and related
services including:
• XOMOX Process Valves
• XOMOX XRPTM Actuators
• Saunders diaphragm valves
Global locatorFor a listing of XomoxManufacturing Facilities, ServiceCenters, Regional Offices, visit our web site www.xomox.com
GLOBAL CAPABILITIESFOR GLOBAL CUSTOMERS
GLOBAL CAPABILITIESFOR GLOBAL CUSTOMERS
®
XOMOX International GmbH & Co.
Von-Behring-Straße 15
D-88131 Lindau/Bodensee
Tel.: (49) 8382-702-0
Fax. (49) 8382-702-144
www.xomox.com
CRANE ChemPharma Flow Solutions Include: Pipe - Valves - Fittings - Actuators - Pumps
© 2009 Xomox International GmbH & Co, www.cranechempharma.com
b r ands y ou t r ust.
© 2008 CRANE ChemPharma Flow Solutions, ww w .cranechempharma.com
C H E M P H A R M A F L O W S O L U T I O N S
Crane Chempharma Flow Solutions Include: Pipe - V alves - Fittings - Actuators - Pumps
ChemPharma Flow SolutionsCwmbran, Gwent NP44 3XX UK
Tel: +44 1633 486666Fax +44 1633 486777
www.cranechempharma.com
brands you trust.
CP-X
X-BU
-EN
-A1-
06-0
9-01
- D
ue to
con
stan
t dev
elop
men
t and
inno
vatio
n, w
e re
serv
e th
erig
ht to
mak
e ch
ange
s to
tech
nica
l spe
cific
atio
ns a
s an
d w
hen
requ
ired.