pneumatic tacker 371/16-401 - home - viper industrial … bea pneumatic tools can be jig-mounted. we...

All BeA pneumatic tools can be jig-mounted.We supply the necessary accessories.

Product Sheet 401

This tool conforms to the EC Directivefor Machinery (89/392 EWG)

Technical DataModel: 371/16-401 371/16-401 L

Standard Long magazine M

Part number: 12000032 12000034

Loading type: bottom loading bottom loading

Staple type: 71 71

Magazine capacity: 189 392

Staple sticks: 1 x 182 2 x 182

Air pressure range: 75-90 P.S.I. 75-90 P.S.I.

Maximum air pressure: 90 P.S.I. 90 P.S.I. 90 6 bar

Air consumption: .01 cu. ft./cycle @ 90 P.S.I. .01 cu. ft./cycle @ 90 P.S.I. 0,3 Liter / 6 bar

Weight: 1.82 lbs. 2.42 lbs.

8.3"

5.5"

Pneumatic Tacker371/16-401This model of the BeA 400 series is among the lightest tackers in this tool series with bottom loading magazine. High penetration power, low air consumption, integrated silencer and its modern design make this tacker an industry standard. The standard magazine takes approximately 200 finewire staples type 71 from 5/32" to 5/8" in length.

Popular ApplicationsFurniture upholstery, seats, radio and television,cabinets, speaker grills, wicker work.

Accessories:Part number Description 14403330 Remote firing valve

14403535 Stationary mounting fixture

Subject to technical modification.

Recommended hose I.D.: ø 3/8" ø 3/8"

Items supplied with tool: Operating instructions, spare parts list, service instructions.

.82"

.86" Width: 1.57"

L: 14.48"

Form

6.4

51A

.01

1101

Staple type 71

Pneumatic Tacker371/16-401

L

3/8"

5/32"

5/8".030" x .024"

Description L = Lengthinches

71/4NK 5/32"

71/5 NK 3/16"Other lengths and finishes are also available on request.

Fastener nomenclature:NK = Galvanized steel HZ = Resin coatedNKS = Galvanized steel, high carbon NR = Stainless steelBK = Brite steel DP = Divergent pointBKS = Brite steel, high carbon

BeA Fasteners U.S.A.2100-120 Fairfax RoadG reensboro, NC 27407Phone: (336) 510-4232Fax: (336) 510-4233

All BeA pneumatic tools can be jig mounted.We supply the necessary accessories.

Product Sheet 420


Technical DataModel: 380/16-420 380/16-420

Standard w/work contact Part number: 12000063 12000065Loading type: bottom loading bottom loading Work contact: contact tripStaple type: 80, 380 80, 380 Magazine capacity: 157 157Standard load, strips x staples/strip: 1 x 100 Type 80 / 1 x 150 Type 380 1 x 100 Type 80 / 1 x 150 Type 380Operating pressure: 75-90 P.S.I. 75-90 P.S.I.Maximum air pressure: 90 P.S.I. 90 P.S.I.Air consumption: .01 cu. ft./cycle @ 90 P.S.I. .01 cu. ft./cycle @ 90 P.S.I.Recommended hose I.D.: ø 3/8" ø 3/8"


.

Items supplied with tool: Operating instructions, spare parts list & service instructions.

Subject to technical modifications.

Pneumatic Tacker380/16-420The light but powerful 420 tacker drives 80 and 380 staples in leg lengths from 5/32" to 5/8". Low air consumption, durability and ease of maintenance make the 420 tacker a real cost saver. The bottom loadingallows for fast and easy loading. The ergonomicdesign of the 420 tacker results in less operatorfatigue. An integrated silencer provides surprisingly quiet operation. The BeA 380/16-420 is a versatile tool suited for industrial use as well as for use by the craftsman.

5.6"

8.7"

.82"

Width: 1.69"

3/4"

Popular applications: Upholstered furniture, TV and stereo cabinets, wicker and rattan furniture, automobile industry, bedding industry

Accessories:Part number Description 14400679 Special back nose assembly for 3 mm and shorter staples only 14406023 Special back nose assembly for 6 mm and shorter staples only shorter14403330 Remote firing valve assembly

Form

6.4

20.0

1 11

01

Pneumatic Tacker380/16-420Staple types 80/380


80/04 NK 5/32"

80/05 NK 3/16"

380/06 NK 1/4"

380/08 NK 5/16"

380/10 NK 3/8"

380/12 NK 1/2"

380/14 NK 9/16"

380/16 NKS 5/8"



Other lengths and finishes are also available on request.

L

1/2"

5/32"

5/8"

.036" x .028"

Pneumatic Tacker71/16-421This light but powerful tacker of the BeA 420 series takes staples type 71 in lengths from 5/32" to 5/8". The low airconsumption, long service life and ease of maintenancemake it a real cost saver. The ergonomic design and theintegrated silencer make it the ideal tool for industrial

Popular ApplicationsUpholstery, bedding, packaging, wicker work,speaker grills, automotive industry.

All BeA pneumatic tools can be jig mounted.We supply the necessary accessories.

Product Sheet 421


8.7"

5.83

"

.79"

1"

Width: 1.69"

applications and for the do it yourselfer.

Technical Data Model: 71/16-421 71/16-421

Part number: 12000330 12000348Loading type: bottom loading bottom loadingFastener type: 71 71Magazine capacity: 190 190

Standard load, strips x fasteners/strip: 1 x 182 1 x 182Working pressure: 75-90 P.S.I. 75-90 P.S.I.

Maximum air pressure: 90 P.S.I. 90 P.S.I. Air consumption: .01 cu. ft./cycle @ 90 P.S.I. .01 cu. ft./cycle @ 90 P.S.I.Recommended hose I.D.: ø 3/8" ø 3/8"


Standard w/contact trip

Items supplied with tool: Operating instructions, spare parts list, service instructions, silencer.

Subject to technical modifications.

The tool is also available with a thin nose: 71/16-421 Profile (12000324).

AccessoriesPart number Description14403330 Remote firing valve assembly14406175 Special back nose assembly for 1 1/4" staples and shorter only

Pneumatic Tacker71/16-421

Form

6.5

54L.

01 0

500

Fastener type 71

L = LengthDescription

in.

71/04 NK 5/32"

71/05 NK 3/16"

L

3/8"

1/4"

5/8".030" x .023"




71/06 NK 1/4"

71/08 NK 5/16"

71/10 NK 3/8"

71/12 NK 1/2"71/14NK 9/16"

71/16 NK 5/8"

All BeA pneumatic tools can be jig-mounted.We supply the necessary accessories.

Product Sheet 436 LN


Technical DataModel: 71/16-436 LN

M

Part number: 12000074

Loading type: Bottom loading

Staple type: 71

Magazine capacity: 190

Standard load, strips x staples/strip: 1 x 182

Air pressure range: 75-90 P.S.I.

Maximum air pressure: 90 P.S.I. 90 6 bar

Air consumption: .017 cu. ft./cycle @ 90 P.S.I. 0,3 Liter / 6 bar

Weight: 2.31 lbs.

Pneumatic Tacker71/16-436 LNA variation of the succesful upholstery tacker 71/16-421. The 2" long nose allows for ease of entry into hard-to- reach areas. Low weight, high driving powercombined with an integrated silencer and low air consumption are the outstanding features of this tacker.

Popular ApplicationsUpholstery, case goods, boat seating, headers,automotive and RV industry.

Accessories:Part number Description 14403330 Remote firing valve assembly

14406166 Back nose assembly set 1/4" staples and shorter only

Subject to technical modification.

Recommended hose I.D.: ø 3/8"

Items supplied with tool: Operating instructions, spare parts list, service instructions.

7.56

"

2"

.78"

8.7"

Width: 1.69"

Long nose

Form

6.4

51A

.01

1101

Staple type 71

Pneumatic Tacker71/16-436 LN

L

3/8"

1/4"

9/16".030" x .024"


71/06 NK 1/4"

71/08 NK 5/16"

71/10 NK 3/8"

71/12 NK 1/2"

71/14 NK 9/16"




SPEED. POWER. RELIABILITY.

Applications

Bedding, Mattresses, Fabric to foam

● BeA flaring tool for mattress, bedding and fabric to foam applications● Screwless adjustment, speeds up operation● Simple dial to adjust flaring of staples, consistent results with each shot● Dial indicator ● Bottom load for quick reloading● Low recoil, cushioned grip for improved operator safety● Improve efficiency, decrease service intervals● Quick and accurate application of 92 series staples● Accepts BeA 92 series staples up to 1” (25mm)● Quality made in Germany and the USA

BeA SelectFlare92/25-553 FC

Easy to

Adjust

BeA 92/25-553 FC

Technical Data

Type description

Item code

Magazine type

Fastener type

Magazine capacity

Fasteners per strip

Operating pressure

Max operating pressure

Air consumption/operation

Inner hose diameter

Emission sound pressure level at the workstation

Single-shot emission sound pressure level

Weight

Vibration level

Accessories supplied with tool

92/25-553FC

12100514

bottom loading

BeA 92 up to 1” (25mm)

120

100

75 – 90 PSI

90 PSI

.016 cu. ft./cycle @ 90 PSI

3/8”

L pA, 1s = 85 dB

L pA, 1s = 93 dB

2.9 lbs (1.3 kg)

less than 2.5m/sec2

Operating instructions, spare parts listservice instructions

92/25-553 FC Dial Adjustment

Turn dial to achieve desired flaring of staples

BeA Fasteners USA, Inc.(336) – 510 – 4232(336) – 510 – 4233 (fax)[email protected]

SPEED. POWER. RELIABILITY.

Subject to technical modifications

1 2 3

Technical DataModel: AT-P50-10B AT-SP50-777 AT-SP50-779

Product Code number: 12100453 12100501 12100502

Staple magazine type: Top load Top load Top load

Staple type: SB103020 JK777 JK779

Magazine capacity: 102 100 168

Standard load: 2 strips (51 ea.) 2 strips (50 ea.) 2 strips (84 ea.)

Operating pressure: 50 PSI 50 PSI 50 PSI

Recommended hose I.D.: 3/8'' 3/8'' 3/8''

Dimensiones L/W/H: 14 ½''x 2 ¼'' x 10 ¼'' 14 ½'' x 2 ¼'' x 10 ¼'' 14 ½'' x 2 ¼'' x 10 ¼''

Weight: 4.85 lbs. 4.85 lbs. 4.85 lbs.

Also available: AT-P50-10B (SB103020) with left curved anvil (12100469) Subject to technical modification


Product Sheet 5010B

Plier StaplerThe BeA P50 line of plier staplers is available in three configurations to accept SB103020 (P50-10B), JK777 (SP50-777), JK779 (SP50-779) type staples. Durable design and double-length magazine allow for continuous use even in tough industrial applications. Optimal working conditions are guaranteed by the built-in air-regulator. The P50 type plier tool provides a strong, tight clinch without breaking the corrugated surface. The 6” deep throat allows for a variety of closing applications. The ATP50-10B (for SB103020) is also available with a left curved anvil (12100469).

ApplicationsPackaging applications (trays and box flaps)

Accessories:tool lubricant, allen key set, suspension ring, tool manual

Part Number Description Length Inches

10004530 SB103020 3/8 3/8''

10003336 SB103020 1/2 1/2''

10003337 SB103020 5/8 5/8''

Fastener nomenclature:NK = Galvanized steel BK = Brite steel HZ = Resin coated DP = Divergent pointNKS = Galvanized steel, high carbon BKS = Brite steel, high carbon NR = Stainless steel

Plier Stapler

Staple Type SB103020BeA Fasteners U.S.A.2100-120 Fairfax RoadGreensboro, NC 27407Phone: (336) 510-4232Fax: (336) 510-4233

(.055'' x 2.5'')

5/8''1/2''3/8''

1/2''


10004509 JK777-10 3/8”

10004510 JK777-12 1/2”

10004512 JK777-16 5/8”

Staple Type JK777

(.063'' x 1.26'')

5/8''1/2''3/8''

1/2''


10004514 JK779-10 3/8”

10004515 JK779-12 1/2”

10004517 JK779-16 5/8”

Staple Type JK779

(.070'' x 2.30'')

5/8''1/2''3/8''

1/2''

pneumatic tacker 371/16-401 - home - viper industrial … bea pneumatic tools can be jig-mounted. we...

Documents